This patch changes the rip handling in the vmrun emulation
path from using next_rip to the generic kvm register access
functions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch implements restoring of the correct rip, rsp, and
rax after the svm emulation in KVM injected a selective_cr0
write intercept into the guest hypervisor. The problem was
that the vmexit is emulated in the instruction emulation
which later commits the registers right after the write-cr0
instruction. So the l1 guest will continue to run with the
l2 rip, rsp and rax resulting in unpredictable behavior.
This patch is not the final word, it is just an easy patch
to fix the issue. The real fix will be done when the
instruction emulator is made aware of nested virtualization.
Until this is done this patch fixes the issue and provides
an easy way to fix this in -stable too.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch fixes 32 bit legacy paging with NPT enabled. The
mmu_check_root call on the top-level of the loop causes
root_gfn to take values (in the tdp_enabled path) which are
outside of guest memory. So the mmu_check_root call fails at
some point in the loop interation causing the guest to
tiple-fault.
This patch changes the mmu_check_root calls to the places
where they are really necessary. As a side-effect it
introduces a check for the root of a pae page table too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We have to protect the include for linux/of.h by __KERNEL__ so it doesn't
accidently get referenced outside.
This patch fixes this and makes the tree compile again.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The e500_tlb.c file didn't compile for me due to the following error:
arch/powerpc/kvm/e500_tlb.c: In function ‘kvmppc_e500_shadow_map’:
arch/powerpc/kvm/e500_tlb.c:300: error: format ‘%lx’ expects type ‘long unsigned int’, but argument 2 has type ‘gfn_t’
So let's explicitly cast the argument to make printk happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
The kvmppc_e500_stlbe_invalidate() function was trying to pass too many
parameters to trace_kvm_stlb_inval(). This appears to be a bad
copy-paste from a call to trace_kvm_stlb_write().
Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
BookE also wants to support level based interrupts, so let's implement
all the necessary logic there. We need to trick a bit here because the
irqprios are 1:1 assigned to architecture defined values. But since there
is some space left there, we can just pick a random one and move it later
on - it's internal anyways.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have all the level interrupt magic in place, let's
expose the capability to user space, so it can make use of it!
Signed-off-by: Alexander Graf <agraf@suse.de>
The current interrupt logic is just completely broken. We get a notification
from user space, telling us that an interrupt is there. But then user space
expects us that we just acknowledge an interrupt once we deliver it to the
guest.
This is not how real hardware works though. On real hardware, the interrupt
controller pulls the external interrupt line until it gets notified that the
interrupt was received.
So in reality we have two events: pulling and letting go of the interrupt line.
To maintain backwards compatibility, I added a new request for the pulling
part. The letting go part was implemented earlier already.
With this in place, we can now finally start guests that do not randomly stall
and stop to work at random times.
This patch implements above logic for Book3S.
Signed-off-by: Alexander Graf <agraf@suse.de>
Before I incorrectly enabled napping also for BookE, which would result in
needless dcache flushes. Since we only need to force enable napping on
Book3s_64 because it doesn't go into MSR_POW otherwise, we can just #ifdef
that code to this particular platform.
Reported-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Match only the first part of cur_cpu_spec->platform.
440GP (the first 440 processor) is identified by the string "ppc440gp", while
all later 440 processors use simply "ppc440".
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Developers can now tell at a glace the exact type of the premature interrupt,
instead of just knowing that there was some premature interrupt.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On Book3S a mtmsr with the MSR_POW bit set indicates that the OS is in
idle and only needs to be waked up on the next interrupt.
Now, unfortunately we let that bit slip into the stored MSR value which
is not what the real CPU does, so that we ended up executing code like
this:
r = mfmsr();
/* r containts MSR_POW */
mtmsr(r | MSR_EE);
This obviously breaks, as we're going into idle mode in code sections that
don't expect to be idling.
This patch masks MSR_POW out of the stored MSR value on wakeup, making
guests happy again.
Signed-off-by: Alexander Graf <agraf@suse.de>
Up until now we were doing segment mappings wrong on Book3s_32. For Book3s_64
we were using a trick where we know that a single mmu_context gives us 16 bits
of context ids.
The mm system on Book3s_32 instead uses a clever algorithm to distribute VSIDs
across the available range, so a context id really only gives us 16 available
VSIDs.
To keep at least a few guest processes in the SID shadow, let's map a number of
contexts that we can use as VSID pool. This makes the code be actually correct
and shouldn't hurt performance too much.
Signed-off-by: Alexander Graf <agraf@suse.de>
There are some heuristics in the PPC power management code that try to find
out if the particular hardware we're running on supports proper power management
or just hangs the machine when going into nap mode.
Since we know that KVM is safe with nap, let's force enable it in the PV code
once we're certain that we are on a KVM VM.
Signed-off-by: Alexander Graf <agraf@suse.de>
We had an arbitrary limitation in mtmsrd L=1 that kept us from using r30 and
r31 as input registers. Let's get rid of that and get more potential speedups!
Signed-off-by: Alexander Graf <agraf@suse.de>
When having a decrementor interrupt pending, the dequeuing happens manually
through an mtdec instruction. This instruction simply calls dequeue on that
interrupt, so the int_pending hint doesn't get updated.
This patch enables updating the int_pending hint also on dequeue, thus
correctly enabling guests to stay in guest contexts more often.
Signed-off-by: Alexander Graf <agraf@suse.de>
So far we've been restricting ourselves to r0-r29 as registers an mtmsr
instruction could use. This was bad, as there are some code paths in
Linux actually using r30.
So let's instead handle all registers gracefully and get rid of that
stupid limitation
Signed-off-by: Alexander Graf <agraf@suse.de>
This is the guest side of the mtsr acceleration. Using this a guest can now
call mtsrin with almost no overhead as long as it ensures that it only uses
it with (MSR_IR|MSR_DR) == 0. Linux does that, so we're good.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that the actual mtsr doesn't do anything anymore, we can move the sr
contents over to the shared page, so a guest can directly read and write
its sr contents from guest context.
Signed-off-by: Alexander Graf <agraf@suse.de>
Right now we're examining the contents of Book3s_32's segment registers when
the register is written and put the interpreted contents into a struct.
There are two reasons this is bad. For starters, the struct has worse real-time
performance, as it occupies more ram. But the more important part is that with
segment registers being interpreted from their raw values, we can put them in
the shared page, allowing guests to mess with them directly.
This patch makes the internal representation of SRs be u32s.
Signed-off-by: Alexander Graf <agraf@suse.de>
The current approach duplicates the spr->bat finding logic and makes it harder
to reuse the actually used variables. So let's move everything down to the spr
handler.
Signed-off-by: Alexander Graf <agraf@suse.de>
We will soon add SR PV support to the shared page, so we need some
infrastructure that allows the guest to query for features KVM exports.
This patch adds a second return value to the magic mapping that
indicated to the guest which features are available.
Signed-off-by: Alexander Graf <agraf@suse.de>
It turns out the in-kernel hash function is sub-optimal for our subtle
hash inputs where every bit is significant. So let's revert to the original
hash functions.
This reverts commit 05340ab4f9a6626f7a2e8f9fe5397c61d494f445.
Signed-off-by: Alexander Graf <agraf@suse.de>
There is a race condition in the pte invalidation code path where we can't
be sure if a pte was invalidated already. So let's move the spin lock around
to get rid of the race.
Signed-off-by: Alexander Graf <agraf@suse.de>
When hitting a no-execute or read-only data/inst storage interrupt we were
flushing the respective PTE so we're sure it gets properly overwritten next.
According to the spec, this is unnecessary though. The guest issues a tlbie
anyways, so we're safe to just keep the PTE around and have it manually removed
from the guest, saving us a flush.
Signed-off-by: Alexander Graf <agraf@suse.de>
When the guest jumps into kernel mode and has the magic page mapped, theres a
very high chance that it will also use it. So let's detect that scenario and
map the segment accordingly.
Signed-off-by: Alexander Graf <agraf@suse.de>
The different ways of flusing shadow ptes have their own debug prints which use
stupid old printk.
Let's move them to tracepoints, making them easier available, faster and
possible to activate on demand
Signed-off-by: Alexander Graf <agraf@suse.de>
After a flush the sid map contained lots of entries with 0 for their gvsid and
hvsid value. Unfortunately, 0 can be a real value the guest searches for when
looking up a vsid so it would incorrectly find the host's 0 hvsid mapping which
doesn't belong to our sid space.
So let's also check for the valid bit that indicated that the sid we're
looking at actually contains useful data.
Signed-off-by: Alexander Graf <agraf@suse.de>
We have a debug printk on every exit that is usually #ifdef'ed out. Using
tracepoints makes a lot more sense here though, as they can be dynamically
enabled.
This patch converts the most commonly used debug printks of EXIT_DEBUG to
tracepoints.
Signed-off-by: Alexander Graf <agraf@suse.de>
The following patch
commit 57ce1659316f4ca298919649f9b1b55862ac3826
KVM: x86: In DM_LOWEST, only deliver interrupts to vcpus with enabled LAPIC's
ignored the fact that kvm_irq_delivery_to_apic() was also used by ia64.
We define kvm_lapic_enabled() to fix a compile error caused by this.
This will have the same effect as reverting the problematic patch for ia64.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
The audit is very high overhead, so we need lower the frequency to assure
the guest is running.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Both audit_mappings() and audit_sptes_have_rmaps() need to walk vcpu's page
table, so we can do these checking in a spte walking
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Both audit_rmap() and audit_write_protection() need to walk all active sp, so
we can do these checking in a sp walking
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Move the audit code from arch/x86/kvm/mmu.c to arch/x86/kvm/mmu_audit.c
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add a r/w module parameter named 'mmu_audit', it can control audit
enable/disable:
enable:
echo 1 > /sys/module/kvm/parameters/mmu_audit
disable:
echo 0 > /sys/module/kvm/parameters/mmu_audit
This patch not change the logic
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
MSR_K7_CLK_CTL is a no longer documented MSR, which is only relevant
on said old AMD CPU models. This change returns the expected value,
which the Linux kernel is expecting to avoid writing back the MSR,
plus it ignores all writes to the MSR.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
ICW is not a full reset, instead it resets a limited number of registers
in the PIC. Change ICW1 emulation to only reset those registers.
Signed-off-by: Avi Kivity <avi@redhat.com>
x86_emulate_insn() is full of things like
if (rc != X86EMUL_CONTINUE)
goto done;
break;
consolidate all of those at the end of the switch statement.
Signed-off-by: Avi Kivity <avi@redhat.com>
Jes Sorensen