Commit Graph

10 Commits

Author SHA1 Message Date
Laxman Dewangan 225ccc2872 drivers/rtc/rtc-tps65910.c: set irq flag to IRQF_EARLY_RESUME during irq request
All interrupt get disabled during system suspend and enabled during system
resume.  The enabling/disabling of interrupt happen in sequence of
interrupt registration with framework.

Therefore, in resume, the parent interrupt of this device enabled before
the RTC irq interrupt enabled.  If RTC is enabled for alarm wake and if
system wake by alarm then there is interrupt pending for RTC.  In resume,
the parent interrupt get enabled before the rtc interrupt and hence ISR
get served.  In ISR, it founds that rtc interrupt is disabled and so it
does not call the rtc isr handler and hence it misses the interrupt.

Setting flag for early resume so that rtc interrupt get enabled before
parent interrupt and so rtc interrupt get enabled when parent interrupt
handler check for interrupt of device and call the rtc handler if it is
there.  This way it will not miss the interrupt.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:28 -08:00
Laxman Dewangan 176a9f20d2 drivers/rtc/rtc-tps65910.c: use sleep_pm_ops macro for initialising suspend/resume callbacks
Use SET_SYSTEM_SLEEP_PM_OPS for setting suspend/resume callbacks for
dev_pm_ops.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:28 -08:00
Laxman Dewangan dfaf09ac85 drivers/rtc/rtc-tps65910.c: remove unnecessary irq stat save and restore
The driver stores the interrupt enable register before going to suspend
and restore in resume.  Also it enables alarm before going to suspend.

The driver only write the Interrupt enable register for enabling ALARM and
does not enable any other bits.  So it is not require to save complete
register and enable ALARM interrupt before suspend and restore in resume.

Also ALARM interrupt already enable if alarm is enabled before going to
suspend and hence it is not require to enable explictly in suspend.

Removing such above code.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:28 -08:00
Laxman Dewangan eb5eba4ef7 drivers/rtc/rtc-tps65910.c: enable/disable wake in suspend/resume
Making the rtc driver as wakeup capabale and leaving the wake
enable/disable decision to user space through a sysfs attribute.

In suspend, enable wake if device wakeup enabled.  In resume disable wake
again.

This change is inline with the Documentation/power/devices.txt#
/sys/devices/.../power/wakeup files

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:28 -08:00
Greg Kroah-Hartman 5a167f4543 Drivers: rtc: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:02 -08:00
Kim, Milo 18c701a9db drivers/rtc/rtc-tps65910.c: enable RTC power domain on initialization
Enabling RTC HW block depends on the default value of TPS65910 register.
In some mode, RTC block is disabled by default.(eg.  AM3517 Craneboard) In
this case, RTC_PWDN(RTC power down) bit should be cleared to enable the
RTC HW block.

This patch also works in case that RTC block is active by default, because
there is no side effect even if the bit is updated again.

Tested on AM3517 Craneboard.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Sivaram Nair <sivaramn@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:21 -08:00
Sivaram Nair 32c4746c24 drivers/rtc/rtc-tps65910.c: rename irq to match device
A cosmetic change to rename the irq name to match the device name.

Signed-off-by: Sivaram Nair <sivaramn@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:21 -08:00
Kim, Milo 1430e17844 drivers/rtc/rtc-tps65910.c: fix invalid pointer access on _remove()
The tps65910_rtc data is registered as the platform driver data in
_probe(= ).  Therefore the tps65910_rtc should be used on unregistering
the rtc device.  And device pointer should be retrieved from the
platform_device structure.

This patch fixes the below oops:

 Unable to handle kernel NULL pointer dereference at virtual address 00000008
 Modules linked in: rtc_tps65910(-)
 CPU: 0    Not tainted  (3.7.0-rc7-next-20121128-g6b1f974-dirty #7)
 PC is at tps65910_rtc_alarm_irq_enable+0x20/0x2c [rtc_tps65910]
     (tps65910_rtc_alarm_irq_enable+0x20/0x2c [rtc_tps65910])
     (tps65910_rtc_remove+0x18/0x28 [rtc_tps65910])
     (platform_drv_remove+0x18/0x1c)
     (__device_release_driver+0x70/0xcc)
     (driver_detach+0xb4/0xb8)
     (bus_remove_driver+0x7c/0xc0)
     (sys_delete_module+0x148/0x21c)

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-30 08:51:18 -08:00
Venu Byravarasu 06f77d18e4 drivers/rtc/rtc-tps65910.c: use platform_get_irq() to get RTC irq details
As RTC driver needs only irq number from platform data, using
platform_get_irq(), instead of generic dev_get_platdata().

Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:07 +09:00
Venu Byravarasu 0e783980b8 rtc: tps65910: add RTC driver for TPS65910 PMIC RTC
TPS65910 PMIC is a MFD with RTC as one of the device.  Adding RTC driver
for supporting RTC device present inside TPS65910 PMIC.

Only support for RTC alarm is implemented as part of this patch.

Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:02 +09:00