Wire-up XDP socket busy-poll support for recvmsg() and sendmsg(). If
the XDP socket prefers busy-polling, make sure that no wakeup/IPI is
performed.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201130185205.196029-6-bjorn.topel@gmail.com
Add a check for need wake up in sendmsg(), so that if a user calls
sendmsg() when no wakeup is needed, do not trigger a wakeup.
To simplify the need wakeup check in the syscall, unconditionally
enable the need wakeup flag for Tx. This has a side-effect for poll();
If poll() is called for a socket without enabled need wakeup, a Tx
wakeup is unconditionally performed.
The wakeup matrix for AF_XDP now looks like:
need wakeup | poll() | sendmsg() | recvmsg()
------------+--------------+-------------+------------
disabled | wake Tx | wake Tx | nop
enabled | check flag; | check flag; | check flag;
| wake Tx/Rx | wake Tx | wake Rx
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201130185205.196029-5-bjorn.topel@gmail.com
Add support for non-blocking recvmsg() to XDP sockets. Previously,
only sendmsg() was supported by XDP socket. Now, for symmetry and the
upcoming busy-polling support, recvmsg() is added.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201130185205.196029-4-bjorn.topel@gmail.com
The functions xsk_map_put() and xsk_map_inc() are simple wrappers and
as such, replace these functions with the functions bpf_map_inc() and
bpf_map_put() and remove some error testing code.
Signed-off-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/1606402998-12562-1-git-send-email-yanjunz@nvidia.com
Introduce batched descriptor interfaces in the xsk core code for the
Tx path to be used in the driver to write a code path with higher
performance. This interface will be used by the i40e driver in the
next patch. Though other drivers would likely benefit from this new
interface too.
Note that batching is only implemented for the common case when
there is only one socket bound to the same device and queue id. When
this is not the case, we fall back to the old non-batched version of
the function.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1605525167-14450-5-git-send-email-magnus.karlsson@gmail.com
Introduce one cache line worth of padding between the consumer pointer
and the flags field as well as between the flags field and the start
of the descriptors in all the lockless rings. This so that the x86 HW
adjacency prefetcher will not prefetch the adjacent pointer/field when
only one pointer/field is going to be used. This improves throughput
performance for the l2fwd sample app with 1% on my machine with HW
prefetching turned on in the BIOS.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1605525167-14450-4-git-send-email-magnus.karlsson@gmail.com
Fix a possible memory leak at xsk socket close that is caused by the
refcounting of the umem object being wrong. The reference count of the
umem was decremented only after the pool had been freed. Note that if
the buffer pool is destroyed, it is important that the umem is
destroyed after the pool, otherwise the umem would disappear while the
driver is still running. And as the buffer pool needs to be destroyed
in a work queue, the umem is also (if its refcount reaches zero)
destroyed after the buffer pool in that same work queue.
What was missing is that the refcount also needs to be decremented
when the pool is not freed and when the pool has not even been
created. The first case happens when the refcount of the pool is
higher than 1, i.e. it is still being used by some other socket using
the same device and queue id. In this case, it is safe to decrement
the refcount of the umem outside of the work queue as the umem will
never be freed because the refcount of the umem is always greater than
or equal to the refcount of the buffer pool. The second case is if the
buffer pool has not been created yet, i.e. the socket was closed
before it was bound but after the umem was created. In this case, it
is safe to destroy the umem outside of the work queue, since there is
no pool that can use it by definition.
Fixes: 1c1efc2af1 ("xsk: Create and free buffer pool independently from umem")
Reported-by: syzbot+eb71df123dc2be2c1456@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1603801921-2712-1-git-send-email-magnus.karlsson@gmail.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-10-12
The main changes are:
1) The BPF verifier improvements to track register allocation pattern, from Alexei and Yonghong.
2) libbpf relocation support for different size load/store, from Andrii.
3) bpf_redirect_peer() helper and support for inner map array with different max_entries, from Daniel.
4) BPF support for per-cpu variables, form Hao.
5) sockmap improvements, from John.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent work in f4d0525921 ("bpf: Add map_meta_equal map ops") and 134fede4ee
("bpf: Relax max_entries check for most of the inner map types") added support
for dynamic inner max elements for most map-in-map types. Exceptions were maps
like array or prog array where the map_gen_lookup() callback uses the maps'
max_entries field as a constant when emitting instructions.
We recently implemented Maglev consistent hashing into Cilium's load balancer
which uses map-in-map with an outer map being hash and inner being array holding
the Maglev backend table for each service. This has been designed this way in
order to reduce overall memory consumption given the outer hash map allows to
avoid preallocating a large, flat memory area for all services. Also, the
number of service mappings is not always known a-priori.
The use case for dynamic inner array map entries is to further reduce memory
overhead, for example, some services might just have a small number of back
ends while others could have a large number. Right now the Maglev backend table
for small and large number of backends would need to have the same inner array
map entries which adds a lot of unneeded overhead.
Dynamic inner array map entries can be realized by avoiding the inlined code
generation for their lookup. The lookup will still be efficient since it will
be calling into array_map_lookup_elem() directly and thus avoiding retpoline.
The patch adds a BPF_F_INNER_MAP flag to map creation which therefore skips
inline code generation and relaxes array_map_meta_equal() check to ignore both
maps' max_entries. This also still allows to have faster lookups for map-in-map
when BPF_F_INNER_MAP is not specified and hence dynamic max_entries not needed.
Example code generation where inner map is dynamic sized array:
# bpftool p d x i 125
int handle__sys_enter(void * ctx):
; int handle__sys_enter(void *ctx)
0: (b4) w1 = 0
; int key = 0;
1: (63) *(u32 *)(r10 -4) = r1
2: (bf) r2 = r10
;
3: (07) r2 += -4
; inner_map = bpf_map_lookup_elem(&outer_arr_dyn, &key);
4: (18) r1 = map[id:468]
6: (07) r1 += 272
7: (61) r0 = *(u32 *)(r2 +0)
8: (35) if r0 >= 0x3 goto pc+5
9: (67) r0 <<= 3
10: (0f) r0 += r1
11: (79) r0 = *(u64 *)(r0 +0)
12: (15) if r0 == 0x0 goto pc+1
13: (05) goto pc+1
14: (b7) r0 = 0
15: (b4) w6 = -1
; if (!inner_map)
16: (15) if r0 == 0x0 goto pc+6
17: (bf) r2 = r10
;
18: (07) r2 += -4
; val = bpf_map_lookup_elem(inner_map, &key);
19: (bf) r1 = r0 | No inlining but instead
20: (85) call array_map_lookup_elem#149280 | call to array_map_lookup_elem()
; return val ? *val : -1; | for inner array lookup.
21: (15) if r0 == 0x0 goto pc+1
; return val ? *val : -1;
22: (61) r6 = *(u32 *)(r0 +0)
; }
23: (bc) w0 = w6
24: (95) exit
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-4-daniel@iogearbox.net
Introduce one cache line worth of padding between the producer and
consumer pointers in all the lockless rings. This so that the HW
adjacency prefetcher will not prefetch the consumer pointer when the
producer pointer is used and vice versa. This improves throughput
performance for the l2fwd sample app with 2% on my machine with HW
prefetching turned on.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1602166338-21378-1-git-send-email-magnus.karlsson@gmail.com
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
After 'peeking' the ring, the consumer, not the producer, reads the data.
Fix this mistake in the comments.
Fixes: 15d8c9162c ("xsk: Add function naming comments and reorder functions")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20200928082344.17110-1-ciara.loftus@intel.com
Fix possible crash in socket_release when an out-of-memory error has
occurred in the bind call. If a socket using the XDP_SHARED_UMEM flag
encountered an error in xp_create_and_assign_umem, the bind code
jumped to the exit routine but erroneously forgot to set the err value
before jumping. This meant that the exit routine thought the setup
went well and set the state of the socket to XSK_BOUND. The xsk socket
release code will then, at application exit, think that this is a
properly setup socket, when it is not, leading to a crash when all
fields in the socket have in fact not been initialized properly. Fix
this by setting the err variable in xsk_bind so that the socket is not
set to XSK_BOUND which leads to the clean-up in xsk_release not being
triggered.
Fixes: 1c1efc2af1 ("xsk: Create and free buffer pool independently from umem")
Reported-by: syzbot+ddc7b4944bc61da19b81@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1601112373-10595-1-git-send-email-magnus.karlsson@gmail.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
In the skb Tx path, transmission of a packet is performed with
dev_direct_xmit(). When NETDEV_TX_BUSY is set in the drivers, it
signifies that it was not possible to send the packet right now,
please try later. Unfortunately, the xsk transmit code discarded the
packet and returned EBUSY to the application. Fix this unnecessary
packet loss, by not discarding the packet in the Tx ring and return
EAGAIN. As EAGAIN is returned to the application, it can then retry
the send operation later and the packet will then likely be sent as
the driver will then likely have space/resources to send the packet.
In summary, EAGAIN tells the application that the packet was not
discarded from the Tx ring and that it needs to call send()
again. EBUSY, on the other hand, signifies that the packet was not
sent and discarded from the Tx ring. The application needs to put
the packet on the Tx ring again if it wants it to be sent.
Fixes: 35fcde7f8d ("xsk: support for Tx")
Reported-by: Arkadiusz Zema <A.Zema@falconvsystems.com>
Suggested-by: Arkadiusz Zema <A.Zema@falconvsystems.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/bpf/1600257625-2353-1-git-send-email-magnus.karlsson@gmail.com
Fix a potential refcount warning that a zero value is increased to one
in xp_dma_map, by initializing the refcount to one to start with,
instead of zero plus a refcount_inc().
Fixes: 921b68692a ("xsk: Enable sharing of dma mappings")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/1600095036-23868-1-git-send-email-magnus.karlsson@gmail.com
For AF_XDP sockets, there was a discrepancy between the number of of
pinned pages and the size of the umem region.
The size of the umem region is used to validate the AF_XDP descriptor
addresses. The logic that pinned the pages covered by the region only
took whole pages into consideration, creating a mismatch between the
size and pinned pages. A user could then pass AF_XDP addresses outside
the range of pinned pages, but still within the size of the region,
crashing the kernel.
This change correctly calculates the number of pages to be
pinned. Further, the size check for the aligned mode is
simplified. Now the code simply checks if the size is divisible by the
chunk size.
Fixes: bbff2f321a ("xsk: new descriptor addressing scheme")
Reported-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200910075609.7904-1-bjorn.topel@gmail.com
Fix use-after-free when a shared umem bind fails. The code incorrectly
tried to free the allocated buffer pool both in the bind code and then
later also when the socket was released. Fix this by setting the
buffer pool pointer to NULL after the bind code has freed the pool, so
that the socket release code will not try to free the pool. This is
the same solution as the regular, non-shared umem code path has. This
was missing from the shared umem path.
Fixes: b5aea28dca ("xsk: Add shared umem support between queue ids")
Reported-by: syzbot+5334f62e4d22804e646a@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1599032164-25684-1-git-send-email-magnus.karlsson@intel.com
Currently, dma_map is being checked, when the right object identifier
to be null-checked is dma_map->dma_pages, instead.
Fix this by null-checking dma_map->dma_pages.
Fixes: 921b68692a ("xsk: Enable sharing of dma mappings")
Addresses-Coverity-ID: 1496811 ("Logically dead code")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20200902150750.GA7257@embeddedor
Fix possible segfault when entry is inserted into xskmap. This can
happen if the socket is in a state where the umem has been set up, the
Rx ring created but it has yet to be bound to a device. In this case
the pool has not yet been created and we cannot reference it for the
existence of the fill ring. Fix this by removing the whole
xsk_is_setup_for_bpf_map function. Once upon a time, it was used to
make sure that the Rx and fill rings where set up before the driver
could call xsk_rcv, since there are no tests for the existence of
these rings in the data path. But these days, we have a state variable
that we test instead. When it is XSK_BOUND, everything has been set up
correctly and the socket has been bound. So no reason to have the
xsk_is_setup_for_bpf_map function anymore.
Fixes: 7361f9c3d7 ("xsk: Move fill and completion rings to buffer pool")
Reported-by: syzbot+febe51d44243fbc564ee@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1599037569-26690-1-git-send-email-magnus.karlsson@intel.com
Fix possible segfault in the xsk diagnostics code when dumping
information about the umem. This can happen when a umem has been
created, but the socket has not been bound yet. In this case, the xsk
buffer pool does not exist yet and we cannot dump the information
that was moved from the umem to the buffer pool. Fix this by testing
for the existence of the buffer pool and if not there, do not dump any
of that information.
Fixes: c2d3d6a474 ("xsk: Move queue_id, dev and need_wakeup to buffer pool")
Fixes: 7361f9c3d7 ("xsk: Move fill and completion rings to buffer pool")
Reported-by: syzbot+3f04d36b7336f7868066@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1599036743-26454-1-git-send-email-magnus.karlsson@intel.com
Add support to share a umem between different devices. This mode
can be invoked with the XDP_SHARED_UMEM bind flag. Previously,
sharing was only supported within the same device. Note that when
sharing a umem between devices, just as in the case of sharing a
umem between queue ids, you need to create a fill ring and a
completion ring and tie them to the socket (with two setsockopts,
one for each ring) before you do the bind with the
XDP_SHARED_UMEM flag. This so that the single-producer
single-consumer semantics of the rings can be upheld.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-13-git-send-email-magnus.karlsson@intel.com
Add support to share a umem between queue ids on the same
device. This mode can be invoked with the XDP_SHARED_UMEM bind
flag. Previously, sharing was only supported within the same
queue id and device, and you shared one set of fill and
completion rings. However, note that when sharing a umem between
queue ids, you need to create a fill ring and a completion ring
and tie them to the socket before you do the bind with the
XDP_SHARED_UMEM flag. This so that the single-producer
single-consumer semantics can be upheld.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-12-git-send-email-magnus.karlsson@intel.com
Enable the sharing of dma mappings by moving them out from the buffer
pool. Instead we put each dma mapped umem region in a list in the umem
structure. If dma has already been mapped for this umem and device, it
is not mapped again and the existing dma mappings are reused.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-9-git-send-email-magnus.karlsson@intel.com
Replicate the addrs pointer in the buffer pool to the umem. This mapping
will be the same for all buffer pools sharing the same umem. In the
buffer pool we leave the addrs pointer for performance reasons.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-8-git-send-email-magnus.karlsson@intel.com
Move the xsk_tx_list and the xsk_tx_list_lock from the umem to
the buffer pool. This so that we in a later commit can share the
umem between multiple HW queues. There is one xsk_tx_list per
device and queue id, so it should be located in the buffer pool.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-7-git-send-email-magnus.karlsson@intel.com
Move queue_id, dev, and need_wakeup from the umem to the
buffer pool. This so that we in a later commit can share the umem
between multiple HW queues. There is one buffer pool per dev and
queue id, so these variables should belong to the buffer pool, not
the umem. Need_wakeup is also something that is set on a per napi
level, so there is usually one per device and queue id. So move
this to the buffer pool too.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-6-git-send-email-magnus.karlsson@intel.com
Move the fill and completion rings from the umem to the buffer
pool. This so that we in a later commit can share the umem
between multiple HW queue ids. In this case, we need one fill and
completion ring per queue id. As the buffer pool is per queue id
and napi id this is a natural place for it and one umem
struture can be shared between these buffer pools.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-5-git-send-email-magnus.karlsson@intel.com
Create and free the buffer pool independently from the umem. Move
these operations that are performed on the buffer pool from the
umem create and destroy functions to new create and destroy
functions just for the buffer pool. This so that in later commits
we can instantiate multiple buffer pools per umem when sharing a
umem between HW queues and/or devices. We also erradicate the
back pointer from the umem to the buffer pool as this will not
work when we introduce the possibility to have multiple buffer
pools per umem.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-4-git-send-email-magnus.karlsson@intel.com
Rename the AF_XDP zero-copy driver interface functions to better
reflect what they do after the replacement of umems with buffer
pools in the previous commit. Mostly it is about replacing the
umem name from the function names with xsk_buff and also have
them take the a buffer pool pointer instead of a umem. The
various ring functions have also been renamed in the process so
that they have the same naming convention as the internal
functions in xsk_queue.h. This so that it will be clearer what
they do and also for consistency.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-3-git-send-email-magnus.karlsson@intel.com
Replace the explicit umem reference passed to the driver in AF_XDP
zero-copy mode with the buffer pool instead. This in preparation for
extending the functionality of the zero-copy mode so that umems can be
shared between queues on the same netdev and also between netdevs. In
this commit, only an umem reference has been added to the buffer pool
struct. But later commits will add other entities to it. These are
going to be entities that are different between different queue ids
and netdevs even though the umem is shared between them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-2-git-send-email-magnus.karlsson@intel.com
Most of the maps do not use max_entries during verification time.
Thus, those map_meta_equal() do not need to enforce max_entries
when it is inserted as an inner map during runtime. The max_entries
check is removed from the default implementation bpf_map_meta_equal().
The prog_array_map and xsk_map are exception. Its map_gen_lookup
uses max_entries to generate inline lookup code. Thus, they will
implement its own map_meta_equal() to enforce max_entries.
Since there are only two cases now, the max_entries check
is not refactored and stays in its own .c file.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200828011813.1970516-1-kafai@fb.com
Some properties of the inner map is used in the verification time.
When an inner map is inserted to an outer map at runtime,
bpf_map_meta_equal() is currently used to ensure those properties
of the inserting inner map stays the same as the verification
time.
In particular, the current bpf_map_meta_equal() checks max_entries which
turns out to be too restrictive for most of the maps which do not use
max_entries during the verification time. It limits the use case that
wants to replace a smaller inner map with a larger inner map. There are
some maps do use max_entries during verification though. For example,
the map_gen_lookup in array_map_ops uses the max_entries to generate
the inline lookup code.
To accommodate differences between maps, the map_meta_equal is added
to bpf_map_ops. Each map-type can decide what to check when its
map is used as an inner map during runtime.
Also, some map types cannot be used as an inner map and they are
currently black listed in bpf_map_meta_alloc() in map_in_map.c.
It is not unusual that the new map types may not aware that such
blacklist exists. This patch enforces an explicit opt-in
and only allows a map to be used as an inner map if it has
implemented the map_meta_equal ops. It is based on the
discussion in [1].
All maps that support inner map has its map_meta_equal points
to bpf_map_meta_equal in this patch. A later patch will
relax the max_entries check for most maps. bpf_types.h
counts 28 map types. This patch adds 23 ".map_meta_equal"
by using coccinelle. -5 for
BPF_MAP_TYPE_PROG_ARRAY
BPF_MAP_TYPE_(PERCPU)_CGROUP_STORAGE
BPF_MAP_TYPE_STRUCT_OPS
BPF_MAP_TYPE_ARRAY_OF_MAPS
BPF_MAP_TYPE_HASH_OF_MAPS
The "if (inner_map->inner_map_meta)" check in bpf_map_meta_alloc()
is moved such that the same error is returned.
[1]: https://lore.kernel.org/bpf/20200522022342.899756-1-kafai@fb.com/
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200828011806.1970400-1-kafai@fb.com
xsk_getsockopt() is copying uninitialized stack memory to userspace when
'extra_stats' is 'false'. Fix it. Doing '= {};' is sufficient since currently
'struct xdp_statistics' is defined as follows:
struct xdp_statistics {
__u64 rx_dropped;
__u64 rx_invalid_descs;
__u64 tx_invalid_descs;
__u64 rx_ring_full;
__u64 rx_fill_ring_empty_descs;
__u64 tx_ring_empty_descs;
};
When being copied to the userspace, 'stats' will not contain any uninitialized
'holes' between struct fields.
Fixes: 8aa5a33578 ("xsk: Add new statistics")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/bpf/20200728053604.404631-1-yepeilin.cs@gmail.com
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer. This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 36 non-merge commits during the last 7 day(s) which contain
a total of 62 files changed, 2242 insertions(+), 468 deletions(-).
The main changes are:
1) Avoid trace_printk warning banner by switching bpf_trace_printk to use
its own tracing event, from Alan.
2) Better libbpf support on older kernels, from Andrii.
3) Additional AF_XDP stats, from Ciara.
4) build time resolution of BTF IDs, from Jiri.
5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It can be useful for the user to know the reason behind a dropped packet.
Introduce new counters which track drops on the receive path caused by:
1. rx ring being full
2. fill ring being empty
Also, on the tx path introduce a counter which tracks the number of times
we attempt pull from the tx ring when it is empty.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200708072835.4427-2-ciara.loftus@intel.com
Use the dma_need_sync helper instead of (not always entirely correctly)
poking into the dma-mapping internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200629130359.2690853-5-hch@lst.de
->dev is already assigned at the top of the function, remove the duplicate
one at the end.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200629130359.2690853-4-hch@lst.de
Invert the polarity and better name the flag so that the use case is
properly documented.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200629130359.2690853-3-hch@lst.de
Set map_btf_name and map_btf_id for all map types so that map fields can
be accessed by bpf programs.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/a825f808f22af52b018dbe82f1c7d29dab5fc978.1592600985.git.rdna@fb.com
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-12
The following pull-request contains BPF updates for your *net* tree.
We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).
The main changes are:
1) sock_hash accounting fix, from Andrey.
2) libbpf fix and probe_mem sanitizing, from Andrii.
3) sock_hash fixes, from Jakub.
4) devmap_val fix, from Jesper.
5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Propagate sock_alloc_send_skb error code, not set it to
EAGAIN unconditionally, when fail to allocate skb, which
might cause that user space unnecessary loops.
Fixes: 35fcde7f8d ("xsk: support for Tx")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1591852266-24017-1-git-send-email-lirongqing@baidu.com
64bit division is kind of expensive, and shift should do the job here.
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Björn Töpel