Commit Graph

1743 Commits

Author SHA1 Message Date
Jeff Layton 1ac12b4b6d vfs: turn is_dir argument to kern_path_create into a lookup_flags arg
Where we can pass in LOOKUP_DIRECTORY or LOOKUP_REVAL. Any other flags
passed in here are currently ignored.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-20 18:50:02 -05:00
Rob Clark b6fa0cd62c dma-buf: might_sleep() in dma_buf_unmap_attachment()
We never really clarified if unmap could be done in atomic context.
But since mapping might require sleeping, this implies mutex in use
to synchronize mapping/unmapping, so unmap could sleep as well.  Add
a might_sleep() to clarify this.

Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2012-12-20 12:05:05 +05:30
Linus Torvalds 2d9c8b5d6a Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS update from Ingo Molnar:
 "Rework all config variables used throughout the MCA code and collect
  them together into a mca_config struct.  This keeps them tightly and
  neatly packed together instead of spilled all over the place.

  Then, convert those which are used as booleans into real booleans and
  save some space.  These bits are exposed via
     /sys/devices/system/machinecheck/machinecheck*/"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, MCA: Finish mca_config conversion
  x86, MCA: Convert the next three variables batch
  x86, MCA: Convert rip_msr, mce_bootlog, monarch_timeout
  x86, MCA: Convert dont_log_ce, banks and tolerant
  drivers/base: Add a DEVICE_BOOL_ATTR macro
2012-12-14 09:59:59 -08:00
Linus Torvalds d8c532c407 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:

 - Missing MAINTAINERS entries were added for several drivers

 - Adds V4L2 support for DMABUF handling, allowing zero-copy buffer
   sharing between V4L2 devices and GPU

 - Got rid of all warnings when compiling with W=1 on x86

 - Add a new driver for Exynos hardware (s3c-camif)

 - Several bug fixes, cleanups and driver improvements

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (243 commits)
  [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
  [media] omap3isp: Prepare/unprepare clocks before/after enable/disable
  [media] omap3isp: preview: Add support for 8-bit formats at the sink pad
  [media] omap3isp: Replace printk with dev_*
  [media] omap3isp: Find source pad from external entity
  [media] omap3isp: Configure CSI-2 phy based on platform data
  [media] omap3isp: Add PHY routing configuration
  [media] omap3isp: Add CSI configuration registers from control block to ISP resources
  [media] omap3isp: Remove unneeded module memory address definitions
  [media] omap3isp: Use monotonic timestamps for statistics buffers
  [media] uvcvideo: Fix control value clamping for unsigned integer controls
  [media] uvcvideo: Mark first output terminal as default video node
  [media] uvcvideo: Add VIDIOC_[GS]_PRIORITY support
  [media] uvcvideo: Return -ENOTTY for unsupported ioctls
  [media] uvcvideo: Set device_caps in VIDIOC_QUERYCAP
  [media] uvcvideo: Don't fail when an unsupported format is requested
  [media] uvcvideo: Return -EACCES when trying to access a read/write-only control
  [media] uvcvideo: Set error_idx properly for extended controls API failures
  [media] rtl28xxu: add NOXON DAB/DAB+ USB dongle rev 2
  [media] fc2580: write some registers conditionally
  ...
2012-12-13 19:22:22 -08:00
Lai Jiangshan 20b2f52b73 numa: add CONFIG_MOVABLE_NODE for movable-dedicated node
We need a node which only contains movable memory.  This feature is very
important for node hotplug.  If a node has normal/highmem, the memory may
be used by the kernel and can't be offlined.  If the node only contains
movable memory, we can offline the memory and the node.

All are prepared, we can actually introduce N_MEMORY.
add CONFIG_MOVABLE_NODE make we can use it for movable-dedicated node

[akpm@linux-foundation.org: fix Kconfig text]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:34 -08:00
Lai Jiangshan 8cebfcd074 hugetlb: use N_MEMORY instead N_HIGH_MEMORY
N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:33 -08:00
Linus Torvalds 99b8f42ee2 regmap: Updates for v3.8
Quite a few enhancements this time around, helpers and diagnostics for
 the most part which is good to see:
 
 - Addition of table based lookups for the register access checks from
   Davide Ciminaghi, making life easier for drivers with big blocks of
   similar registers.
 - Allow drivers to get the irqdomain for regmap irq_chips, allowing the
   domain to be used with other APIs.
 - Debug improvements for paged register maps.
 - Performance improvments for some of the diagnostic infrastructure,
   very helpful for devices with large register maps.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQxy2mAAoJELSic+t+oim9s+QP/0sXqx5MtY5C6xMhY64P3OOB
 A5zCHHl12eXFc9D8MnGzhS87AfVFsqMe7I/Opdq4uajqUXUe4qQcYYAo0p2lFWWo
 nD1R4K9TU2X8d4eF3S38anH8ADBR38tRwYeSzsbZqsLYuolbs92/TJJZKqsQjxdo
 TipVEEqWXHntc43fOhrvVqfmD+2n/9vVKBBC5vtx6IW2o1JSfcHoKe7+qnOeRUsc
 f+UWOhPM6NrNQnICzBrRQ6xTFT55TpfSyas7tHiMVaoWGe+p5aqsXbudzOjFlfny
 vEnRv2h5CJuqZdrv7g/vxV7i2KayOJq9rFS/1jQ4xcIOCIlNN14RBONKR7VuicGv
 I6GjXQPRjgIPnVxMhzujn25zZ2bFDpx1AZLrp/I1PZi3582/ZfF9twFxJ4T8OFOH
 uZESk/jMxaOZzEN0h/TNgcrmJnbpGh1SCBUihLDJi/eSglGtPkd7GtqutL/kHm01
 boWWv3nwAztNrh2HDQkTUi4+bqNtxh3ZTOPFHBu31SLcATUlEDCQ8zuwhfCPp60U
 jP9VYx1tMtK3sLg7wUKLZTCYQF9ezaquBlAOcMINbRisN2dByj/ZAfCMSTZ3ZJqQ
 iVoThJR3llKfWzS7X9PdUtNPv94Nb+YAfH7HH3wUYGJzgJHMgGek1x/S6D4VAMTu
 Wnad4By9rpFEnzT0x32i
 =Jy7K
 -----END PGP SIGNATURE-----

Merge tag 'regmap-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "Quite a few enhancements this time around, helpers and diagnostics for
  the most part which is good to see:

   - Addition of table based lookups for the register access checks from
     Davide Ciminaghi, making life easier for drivers with big blocks of
     similar registers.
   - Allow drivers to get the irqdomain for regmap irq_chips, allowing
     the domain to be used with other APIs.
   - Debug improvements for paged register maps.
   - Performance improvments for some of the diagnostic infrastructure,
     very helpful for devices with large register maps."

* tag 'regmap-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: debugfs: Cache offsets of valid regions for dump
  regmap: debugfs: Factor out initial seek
  regmap: debugfs: Avoid overflows for very small reads
  regmap: Cache register and value sizes for debugfs
  regmap: introduce tables for readable/writeable/volatile/precious checks
  regmap: core: Report registers in hex when we can't cache
  regmap: Fix printing of size_t variable
  regmap: make lock/unlock functions customizable
  regmap: silence GCC warning
  regmap: Split raw writes that cross window boundaries
  regmap: Make return code checks consistent
  regmap: Factor range lookup out of page selection
  regmap: Provide debugfs read of register ranges
  regmap: Factor out debugfs register read
  regmap: Allow ranges to be named
  regmap: When we sanity check during range adds say what errors we find
  regmap: Rename n_ranges to num_ranges
  regmap: irq: Allow users to retrieve the irq_domain
2012-12-12 07:55:48 -08:00
Linus Torvalds 608ff1a210 Merge branch 'akpm' (Andrew's patchbomb)
Merge misc updates from Andrew Morton:
 "About half of most of MM.  Going very early this time due to
  uncertainty over the coreautounifiednumasched things.  I'll send the
  other half of most of MM tomorrow.  The rest of MM awaits a slab merge
  from Pekka."

* emailed patches from Andrew Morton: (71 commits)
  memory_hotplug: ensure every online node has NORMAL memory
  memory_hotplug: handle empty zone when online_movable/online_kernel
  mm, memory-hotplug: dynamic configure movable memory and portion memory
  drivers/base/node.c: cleanup node_state_attr[]
  bootmem: fix wrong call parameter for free_bootmem()
  avr32, kconfig: remove HAVE_ARCH_BOOTMEM
  mm: cma: remove watermark hacks
  mm: cma: skip watermarks check for already isolated blocks in split_free_page()
  mm, oom: fix race when specifying a thread as the oom origin
  mm, oom: change type of oom_score_adj to short
  mm: cleanup register_node()
  mm, mempolicy: remove duplicate code
  mm/vmscan.c: try_to_freeze() returns boolean
  mm: introduce putback_movable_pages()
  virtio_balloon: introduce migration primitives to balloon pages
  mm: introduce compaction and migration for ballooned pages
  mm: introduce a common interface for balloon pages mobility
  mm: redefine address_space.assoc_mapping
  mm: adjust address_space_operations.migratepage() return code
  arch/sparc/kernel/sys_sparc_64.c: s/COLOUR/COLOR/
  ...
2012-12-11 18:05:37 -08:00
Lai Jiangshan 511c2aba8f mm, memory-hotplug: dynamic configure movable memory and portion memory
Add online_movable and online_kernel for logic memory hotplug.  This is
the dynamic version of "movablecore" & "kernelcore".

We have the same reason to introduce it as to introduce "movablecore" &
"kernelcore".  It has the same motive as "movablecore" & "kernelcore", but
it is dynamic/running-time:

o We can configure memory as kernelcore or movablecore after boot.

  Userspace workload is increased, we need more hugepage, we can't use
  "online_movable" to add memory and allow the system use more
  THP(transparent-huge-page), vice-verse when kernel workload is increase.

  Also help for virtualization to dynamic configure host/guest's memory,
  to save/(reduce waste) memory.

  Memory capacity on Demand

o When a new node is physically online after boot, we need to use
  "online_movable" or "online_kernel" to configure/portion it as we
  expected when we logic-online it.

  This configuration also helps for physically-memory-migrate.

o all benefit as the same as existed "movablecore" & "kernelcore".

o Preparing for movable-node, which is very important for power-saving,
  hardware partitioning and high-available-system(hardware fault
  management).

(Note, we don't introduce movable-node here.)

Action behavior:
When a memoryblock/memorysection is onlined by "online_movable", the kernel
will not have directly reference to the page of the memoryblock,
thus we can remove that memory any time when needed.

When it is online by "online_kernel", the kernel can use it.
When it is online by "online", the zone type doesn't changed.

Current constraints:
Only the memoryblock which is adjacent to the ZONE_MOVABLE
can be online from ZONE_NORMAL to ZONE_MOVABLE.

[akpm@linux-foundation.org: use min_t, cleanups]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:28 -08:00
Lai Jiangshan fcf07d22f0 drivers/base/node.c: cleanup node_state_attr[]
use [index] = init_value
use N_xxxxx instead of hardcode.

Make it more readability and easier to add new state.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:28 -08:00
Yasuaki Ishimatsu fa26437517 mm: cleanup register_node()
register_node() is defined as extern in include/linux/node.h.  But the
function is only called from register_one_node() in driver/base/node.c.

So the patch defines register_node() as static.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:27 -08:00
Yasuaki Ishimatsu 8c7b5b4ed9 memory-hotplug: suppress "Device nodeX does not have a release() function" warning
When calling unregister_node(), the function shows following message at
device_release().

"Device 'node2' does not have a release() function, it is broken and must
be fixed."

The reason is node's device struct does not have a release() function.

So the patch registers node_device_release() to the device's release()
function for suppressing the warning message.  Additionally, the patch
adds memset() to initialize a node struct into register_node().  Because
the node struct is part of node_devices[] array and it cannot be freed by
node_device_release().  So if system reuses the node struct, it has a
garbage.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:23 -08:00
Wen Congyang 8732794b16 numa: convert static memory to dynamically allocated memory for per node device
We use a static array to store struct node.  In many cases, we don't have
too many nodes, and some memory will be unused.  Convert it to per-device
dynamically allocated memory.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:23 -08:00
Yasuaki Ishimatsu fa7194eb99 memory hotplug: suppress "Device memoryX does not have a release() function" warning
When calling remove_memory_block(), the function shows following message
at device_release().

"Device 'memory528' does not have a release() function, it is broken and
must be fixed."

The reason is memory_block's device struct does not have a release()
function.

So the patch registers memory_block_release() to the device's release()
function for suppressing the warning message.  Additionally, the patch
moves kfree(mem) into the release function since the release function is
prepared as a means to free a memory_block struct.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:22 -08:00
Linus Torvalds cff2f741b8 Driver core updates for 3.8-rc1
Here's the large driver core updates for 3.8-rc1.
 
 The biggest thing here is the various __dev* marking removals.  This is
 going to be a pain for the merge with different subsystem trees, I know,
 but all of the patches included here have been ACKed by their various
 subsystem maintainers, as they wanted them to go through here.
 
 If this is too much of a pain, I can pull all of them out of this tree
 and just send you one with the other fixes/updates and then, after
 3.8-rc1 is out, do the rest of the removals to ensure we catch them all,
 it's up to you.  The merges should all be trivial, and Stephen has been
 doing them all in linux-next for a few weeks now quite easily.
 
 Other than the __dev* marking removals, there's nothing major here, some
 firmware loading updates and other minor things in the driver core.
 
 All of these have (much to Stephen's annoyance), been in linux-next for
 a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlDHkPkACgkQMUfUDdst+ykaWgCfW7AM30cv0nzoVO08ax6KjlG1
 KVYAn3z/KYazvp4B6LMvrW9y0G34Wmad
 =yvVr
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the large driver core updates for 3.8-rc1.

  The biggest thing here is the various __dev* marking removals.  This
  is going to be a pain for the merge with different subsystem trees, I
  know, but all of the patches included here have been ACKed by their
  various subsystem maintainers, as they wanted them to go through here.

  If this is too much of a pain, I can pull all of them out of this tree
  and just send you one with the other fixes/updates and then, after
  3.8-rc1 is out, do the rest of the removals to ensure we catch them
  all, it's up to you.  The merges should all be trivial, and Stephen
  has been doing them all in linux-next for a few weeks now quite
  easily.

  Other than the __dev* marking removals, there's nothing major here,
  some firmware loading updates and other minor things in the driver
  core.

  All of these have (much to Stephen's annoyance), been in linux-next
  for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio
update.

* tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits)
  modpost.c: Stop checking __dev* section mismatches
  init.h: Remove __dev* sections from the kernel
  acpi: remove use of __devinit
  PCI: Remove __dev* markings
  PCI: Always build setup-bus when PCI is enabled
  PCI: Move pci_uevent into pci-driver.c
  PCI: Remove CONFIG_HOTPLUG ifdefs
  unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs
  sh/PCI: Remove CONFIG_HOTPLUG ifdefs
  powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs
  mips/PCI: Remove CONFIG_HOTPLUG ifdefs
  microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs
  dma: remove use of __devinit
  dma: remove use of __devexit_p
  firewire: remove use of __devinitdata
  firewire: remove use of __devinit
  leds: remove use of __devexit
  leds: remove use of __devinit
  leds: remove use of __devexit_p
  mmc: remove use of __devexit
  ...
2012-12-11 13:13:55 -08:00
Linus Torvalds bad73c5aa0 ACPI and power management updates for 3.8-rc1
* Introduction of device PM QoS flags.
 
 * ACPI device power management update allowing subsystems other than
   PCI to use it more easily.
 
 * ACPI device enumeration rework allowing additional kinds of devices
   to be enumerated via ACPI.  From Mika Westerberg, Adrian Hunter,
   Mathias Nyman, Andy Shevchenko, and Rafael J. Wysocki.
 
 * ACPICA update to version 20121018 from Bob Moore and Lv Zheng.
 
 * ACPI memory hotplug update from Wen Congyang and Yasuaki Ishimatsu.
 
 * Introduction of acpi_handle_<level>() messaging macros and ACPI-based CPU
   hot-remove support from Toshi Kani.
 
 * ACPI EC updates from Feng Tang.
 
 * cpufreq updates from Viresh Kumar, Fabio Baltieri and others.
 
 * cpuidle changes to quickly notice governor prediction failure from
   Youquan Song.
 
 * Support for using multiple cpuidle drivers at the same time and cpuidle
   cleanups from Daniel Lezcano.
 
 * devfreq updates from Nishanth Menon and others.
 
 * cpupower update from Thomas Renninger.
 
 * Fixes and small cleanups all over the place.
 
 --
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQxxevAAoJEKhOf7ml8uNsHacQAK2xoQozDddPBAaTCf1OWW/G
 J4E2qMn+gy4AtFmQ0/xeZVvvylOCn9eu/kv3QJ/bFlVoUsqTgfPwQBjT6HjF1Acn
 7yVFdr9H/tn2wi9nW2Gv6Tl2Hr/kFLpo0f5Kd40Z+P8SV5sKX5ktJcVpJ/I/P4Vh
 Qw2nWtj7hQktZDERzgG4ZpMbQToNhbLhbKWB9ad3/XQSSA9JkfgvBFgrTEGHcZD5
 bwsggjNdOAWNGeDdzRsQSDn0Alld5ILVdSJ5xKimO1O70WvKc7fqA1IdYRIeKL90
 yz4bcoYKzl9iktlw8+x5o1U9mrc8TFV5p4+zV+t5Z6pzS/J3kWvnsW4zu9sCrxFv
 Wic3SKyiem7s2dxrYyj4ZXAci3GK4ouRTrCLqk7/00tEGdwAQD1ZNfsUJp6jKayz
 FvtZUgItcOyrlQ6B4nh951OY6dI3AUYJ2NuWWNr5NZkgVAvQGV8zTGOImbeVeL2+
 pMiw14zScO3ylYilVcjTKDDMj2sDZ68mw5PIcbmksvWsCLo26jDBVDtLVmtYWyd4
 ek3WnOrQZr0R3agvOLLssMKXompvpP+N4Klf4rV+GtqGsWtHryYKys2Laju9FwFj
 yYLchxYlxhGTzqq8LjF90HDL0TWpPe6cPi+B5ow9g/SXLexbMKNQGhv3Jovm2yR3
 j54tKBWy7e9AAYEDPirX
 =6OEP
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 - Introduction of device PM QoS flags.

 - ACPI device power management update allowing subsystems other than
   PCI to use it more easily.

 - ACPI device enumeration rework allowing additional kinds of devices
   to be enumerated via ACPI.  From Mika Westerberg, Adrian Hunter,
   Mathias Nyman, Andy Shevchenko, and Rafael J. Wysocki.

 - ACPICA update to version 20121018 from Bob Moore and Lv Zheng.

 - ACPI memory hotplug update from Wen Congyang and Yasuaki Ishimatsu.

 - Introduction of acpi_handle_<level>() messaging macros and ACPI-based
   CPU hot-remove support from Toshi Kani.

 - ACPI EC updates from Feng Tang.

 - cpufreq updates from Viresh Kumar, Fabio Baltieri and others.

 - cpuidle changes to quickly notice governor prediction failure from
   Youquan Song.

 - Support for using multiple cpuidle drivers at the same time and
   cpuidle cleanups from Daniel Lezcano.

 - devfreq updates from Nishanth Menon and others.

 - cpupower update from Thomas Renninger.

 - Fixes and small cleanups all over the place.

* tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (196 commits)
  mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6
  ACPI: add Haswell LPSS devices to acpi_platform_device_ids list
  ACPI: add documentation about ACPI 5 enumeration
  pnpacpi: fix incorrect TEST_ALPHA() test
  ACPI / PM: Fix header of acpi_dev_pm_detach() in acpi.h
  ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000
  ACPI : do not use Lid and Sleep button for S5 wakeup
  ACPI / PNP: Do not crash due to stale pointer use during system resume
  ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist
  ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set
  spi / ACPI: add ACPI enumeration support
  gpio / ACPI: add ACPI support
  PM / devfreq: remove compiler error with module governors (2)
  cpupower: IvyBridge (0x3a and 0x3e models) support
  cpupower: Provide -c param for cpupower monitor to schedule process on all cores
  cpupower tools: Fix warning and a bug with the cpu package count
  cpupower tools: Fix malloc of cpu_info structure
  cpupower tools: Fix issues with sysfs_topology_read_file
  cpupower tools: Fix minor warnings
  cpupower tools: Update .gitignore for files created in the debug directories
  ...
2012-12-11 12:45:35 -08:00
Vitaly Andrianov 4009793e15 drivers: cma: represent physical addresses as phys_addr_t
This commit changes the CMA early initialization code to use phys_addr_t
for representing physical addresses instead of unsigned long.

Without this change, among other things, dma_declare_contiguous() simply
discards any memory regions whose address is not representable as unsigned
long.

This is a problem on 32-bit PAE machines where unsigned long is 32-bit
but physical address space is larger.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-12-11 09:28:09 +01:00
Mark Brown 7c8a299430 Merge remote-tracking branch 'regmap/topic/type' into regmap-next 2012-12-11 12:39:49 +09:00
Mark Brown 8e24a6e696 Merge remote-tracking branch 'regmap/topic/table' into regmap-next 2012-12-11 12:39:32 +09:00
Mark Brown db760fbecd Merge remote-tracking branch 'regmap/topic/lock' into regmap-next 2012-12-11 12:39:30 +09:00
Mark Brown 4d348e6e0a Merge remote-tracking branch 'regmap/topic/domain' into regmap-next 2012-12-11 12:39:29 +09:00
Mark Brown bcf86687d6 Merge remote-tracking branch 'regmap/topic/debugfs' into regmap-next 2012-12-11 12:39:20 +09:00
Mark Brown d3816c1a0e Merge remote-tracking branch 'regmap/topic/core' into regmap-next 2012-12-11 12:39:17 +09:00
Mark Brown 5166b7c006 regmap: debugfs: Cache offsets of valid regions for dump
Avoid doing a linear scan of the entire register map for each read() of
the debugfs register dump by recording the offsets where valid registers
exist when we first read the registers file. This assumes the set of
valid registers never changes, if this is not the case invalidation of
the cache will be required.

This could be further improved for large blocks of contiguous registers
by calculating the register we will read from within the block - currently
we do a linear scan of the block. An rbtree may also be worthwhile.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-11 01:29:47 +09:00
Mark Brown afab2f7b21 regmap: debugfs: Factor out initial seek
In preparation for doing things a bit more quickly than a linear scan
factor out the initial seek from the debugfs register dump.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-11 01:29:47 +09:00
Mark Brown db04328c16 regmap: debugfs: Avoid overflows for very small reads
If count is less than the size of a register then we may hit integer
wraparound when trying to move backwards to check if we're still in
the buffer. Instead move the position forwards to check if it's still
in the buffer, we are unlikely to be able to allocate a buffer
sufficiently big to overflow here.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2012-12-11 01:29:39 +09:00
Mark Brown cbc1938bad regmap: Cache register and value sizes for debugfs
No point in calculating them every time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-06 15:10:21 +09:00
Rafael J. Wysocki 170bb4c800 Merge branch 'pm-sleep'
* pm-sleep:
  PM / Freezer: Fixup compile error of try_to_freeze_nowarn()
  driver core / PM: move the calling to device_pm_remove behind the calling to bus_remove_device
  PM / Hibernate: use rb_entry
  PM / sysfs: replace strict_str* with kstrto*
2012-11-29 21:46:48 +01:00
Rafael J. Wysocki 64adb0192f Merge branch 'pm-runtime'
* pm-runtime:
  base: power - use clk_prepare_enable and clk_prepare_disable
2012-11-29 21:46:41 +01:00
Rafael J. Wysocki 26ab93438f Merge branch 'pm-opp'
* pm-opp:
  PM / OPP: using kfree_rcu() to simplify the code
  PM / OPP: predictable fail results for opp_find* functions, v2
  PM / OPP: Export symbols for module usage.
  PM / OPP: RCU reclaim
2012-11-29 21:46:33 +01:00
Rafael J. Wysocki bcacbdbdc8 Merge branch 'acpi-enumeration'
* acpi-enumeration:
  ACPI: remove unnecessary INIT_LIST_HEAD
  ACPI / platform: include missed header into acpi_platform.c
  platform / ACPI: Attach/detach ACPI PM during probe/remove/shutdown
  mmc: sdhci-acpi: add SDHCI ACPI driver
  ACPI: add SDHCI to ACPI platform devices
  ACPI / PNP: skip ACPI device nodes associated with physical nodes already
  i2c / ACPI: add ACPI enumeration support
  ACPI / platform: Initialize ACPI handles of platform devices in advance
  ACPI / driver core: Introduce struct acpi_dev_node and related macros
  ACPI: Allow ACPI handles of devices to be initialized in advance
  ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks
  ACPI: Centralized processing of ACPI device resources
  ACPI / platform: Use common ACPI device resource parsing routines
  ACPI: Move device resources interpretation code from PNP to ACPI core
  ACPI / platform: use ACPI device name instead of _HID._UID
  ACPI: Add support for platform bus type
  ACPI / ia64: Export acpi_[un]register_gsi()
  ACPI / x86: Export acpi_[un]register_gsi()
  ACPI: Provide generic functions for matching ACPI device nodes
  driver core / ACPI: Move ACPI support to core device and driver types
2012-11-29 21:41:25 +01:00
Rafael J. Wysocki c8b6817103 Merge branch 'pm-qos'
* pm-qos:
  PM / QoS: Handle device PM QoS flags while removing constraints
  PM / QoS: Resume device before exposing/hiding PM QoS flags
  PM / QoS: Document request manipulation requirement for flags
  PM / QoS: Fix a free error in the dev_pm_qos_constraints_destroy()
  PM / QoS: Fix the return value of dev_pm_qos_update_request()
  PM / ACPI: Take device PM QoS flags into account
  PM / Domains: Check device PM QoS flags in pm_genpd_poweroff()
  PM / QoS: Make it possible to expose PM QoS device flags to user space
  PM / QoS: Introduce PM QoS device flags support
  PM / QoS: Prepare struct dev_pm_qos_request for more request types
  PM / QoS: Introduce request and constraint data types for PM QoS flags
  PM / QoS: Prepare device structure for adding more constraint types
2012-11-29 21:40:32 +01:00
Bill Pemberton a42d1e31d4 driver core: remove CONFIG_HOTPLUG ifdefs
Remove conditional code based on CONFIG_HOTPLUG being false.  It's
always on now in preparation of it going away as an option.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 10:33:03 -08:00
Mauro Carvalho Chehab d033a308d8 Merge remote-tracking branch 'linus/master' into staging/for_v3.8
* linus/master: (1428 commits)
  futex: avoid wake_futex() for a PI futex_q
  watchdog: using u64 in get_sample_period()
  writeback: put unused inodes to LRU after writeback completion
  mm: vmscan: check for fatal signals iff the process was throttled
  Revert "mm: remove __GFP_NO_KSWAPD"
  proc: check vma->vm_file before dereferencing
  UAPI: strip the _UAPI prefix from header guards during header installation
  include/linux/bug.h: fix sparse warning related to BUILD_BUG_ON_INVALID
  Linux 3.7-rc7
  powerpc/eeh: Do not invalidate PE properly
  ALSA: hda - Fix build without CONFIG_PM
  of/address: sparc: Declare of_iomap as an extern function for sparc again
  PM / QoS: fix wrong error-checking condition
  bnx2x: remove redundant warning log
  vxlan: fix command usage in its doc
  8139cp: revert "set ring address before enabling receiver"
  MPI: Fix compilation on MIPS with GCC 4.4 and newer
  MIPS: Fix crash that occurs when function tracing is enabled
  MIPS: Merge overlapping bootmem ranges
  jbd: Fix lock ordering bug in journal_unmap_buffer()
  ...
2012-11-28 07:22:38 -02:00
Rafael J. Wysocki 94d76d5de3 platform / ACPI: Attach/detach ACPI PM during probe/remove/shutdown
Drivers usually expect that the devices they are supposed to handle
will be operational when their .probe() routines are called, but that
need not be the case on some ACPI-based systems with ACPI-based
device enumeration where the BIOSes don't put devices into D0 by
default.  To work around this problem it is sufficient to change
bus type .probe() routines to ensure that devices will be powered
on before the drivers' .probe() routines run (and their .remove()
and .shutdown() routines accordingly).

Modify platform_drv_probe() to run acpi_dev_pm_attach() for devices
whose ACPI handles are present, so that ACPI power management is used
to change their power states.  Analogously, modify
platform_drv_remove() and platform_drv_shutdown() to call
acpi_dev_pm_detach() for those devices, so that they are not subject
to ACPI PM any more.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2012-11-27 13:44:45 +01:00
Rafael J. Wysocki 45c36462ae Merge branch 'acpi-dev-pm' into acpi-enumeration
Subsequent commits in this branch will depend on 'acpi-dev-pm'
material.
2012-11-27 13:42:42 +01:00
Marek Szyprowski c6c22955f8 [media] dma-mapping: fix dma_common_get_sgtable() conditional compilation
dma_common_get_sgtable() function doesn't depend on
ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY, so it must not be compiled
conditionally.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-27 09:42:31 -02:00
Josh Triplett 93058424af drivers/base/core.c: Mark to_root_device static
Nothing outside of drivers/base/core.c references this function.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26 16:25:36 -08:00
ShuoX Liu 0246c4fafc driver core: use initcall_debug to control shutdown info
syscore_shutdown uses initcall_debug to control the debug info output.
It’s a good programming. But device_shutdown doesn’t. The patch changes
device_shutdown to follow the style.

Signed-off-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Signed-off-by: ShuoX Liu <shuox.liu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26 16:25:36 -08:00
Rafael J. Wysocki 35546bd477 PM / QoS: Handle device PM QoS flags while removing constraints
PM QoS flags have to be handled by dev_pm_qos_constraints_destroy()
in the same way as PM QoS resume latency constraints.  That is, if
they have been exposed to user space, they have to be hidden from it
and the list of flags requests has to be flushed before destroying
the device's PM QoS object.  Make that happen.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-24 10:10:51 +01:00
Guennadi Liakhovetski a7227a0faa PM / QoS: fix wrong error-checking condition
dev_pm_qos_add_request() can return 0, 1, or a negative error code,
therefore the correct error test is "if (error < 0)." Checking just for
non-zero return code leads to erroneous setting of the req->dev pointer
to NULL, which then leads to a repeated call to
dev_pm_qos_add_ancestor_request() in st1232_ts_irq_handler(). This in turn
leads to an Oops, when the I2C host adapter is unloaded and reloaded again
because of the inconsistent state of its QoS request list.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-23 20:55:06 +01:00
Davide Ciminaghi 76aad392f7 regmap: introduce tables for readable/writeable/volatile/precious checks
Many of the regmap enabled drivers implementing one or more of the
readable, writeable, volatile and precious methods use the same code
pattern:

	return ((reg >= X && reg <= Y) || (reg >= W && reg <= Z) || ...)

Switch to a data driven approach, using tables to describe
readable/writeable/volatile and precious registers ranges instead.
The table based check can still be overridden by passing the usual function
pointers via struct regmap_config.

Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-21 11:10:31 +09:00
Mark Brown 3afa24f7ad Merge branch 'topic/lock' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into regmap-table 2012-11-21 11:09:46 +09:00
Mark Brown 869e4a5f58 Merge branches 'topic/core' and 'topic/range' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into regmap-table 2012-11-21 11:08:31 +09:00
Rafael J. Wysocki 863f9f30e6 ACPI / platform: Initialize ACPI handles of platform devices in advance
The current platform device creation and registration code in
acpi_create_platform_device() is quite convoluted.  This function
takes an ACPI device node as an argument and eventually calls
platform_device_register_resndata() to create and register a
platform device object on the basis of the information contained
in that code.  However, it doesn't associate the new platform
device with the ACPI node directly, but instead it relies on
acpi_platform_notify(), called from within device_add(), to find
that ACPI node again with the help of acpi_platform_find_device()
and acpi_platform_match() and then attach the new platform device
to it.  This causes an additional ACPI namespace walk to happen and
is clearly suboptimal.

Use the observation that it is now possible to initialize the ACPI
handle of a device before calling device_add() for it to make this
code more straightforward.  Namely, add a new field to struct
platform_device_info allowing us to pass the ACPI handle of interest
to platform_device_register_full(), which will then use it to
initialize the new device's ACPI handle before registering it.
This will cause acpi_platform_notify() to use the ACPI handle from
the device structure directly instead of using the .find_device()
routine provided by the device's bus type.  In consequence,
acpi_platform_bus, acpi_platform_find_device(), and
acpi_platform_match() are not necessary any more, so remove them.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 00:21:59 +01:00
Wolfram Sang d6ff85513d driver: platform: fix documentation for platform_get_irq_byname
Probably due to copy&paste, some stuff was simply forgotten.

Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 17:46:41 -08:00
LongX Zhang 4b6d1f12f9 driver core / PM: move the calling to device_pm_remove behind the calling to bus_remove_device
We hit an hang issue when removing a mmc device on Medfield Android phone by sysfs interface.

device_pm_remove will call pm_runtime_remove which would disable
runtime PM of the device. After that pm_runtime_get* or
pm_runtime_put* will be ignored. So if we disable the runtime PM
before device really be removed, drivers' _remove callback may
access HW even pm_runtime_get* fails. That is bad.

Consider below call sequence when removing a device:
device_del => device_pm_remove
             => class_intf->remove_dev(dev, class_intf)  => pm_runtime_get_sync/put_sync
             => bus_remove_device => device_release_driver => pm_runtime_get_sync/put_sync

remove_dev might call pm_runtime_get_sync/put_sync.
Then, generic device_release_driver also calls pm_runtime_get_sync/put_sync.
Since device_del => device_pm_remove firstly, later _get_sync wouldn't really wake up the device.

I git log -p to find the patch which moves the calling to device_pm_remove ahead.
It's below patch:

commit  775b64d2b6
Author: Rafael J. Wysocki <rjw@sisk.pl>
Date:   Sat Jan 12 20:40:46 2008 +0100

     PM: Acquire device locks on suspend

     This patch reorganizes the way suspend and resume notifications are
     sent to drivers.  The major changes are that now the PM core acquires
     every device semaphore before calling the methods, and calls to
     device_add() during suspends will fail, while calls to device_del()
     during suspends will block.

     It also provides a way to safely remove a suspended device with the
     help of the PM core, by using the device_pm_schedule_removal() callback
     introduced specifically for this purpose, and updates two drivers (msr
     and cpuid) that need to use it.

As device_pm_schedule_removal is deleted by another patch, we need also revert other parts of the patch,
i.e. move the calling of device_pm_remove after the calling to bus_remove_device.

Signed-off-by: LongX Zhang <longx.zhang@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:37:09 +01:00
Murali Karicheri c122f27e1c base: power - use clk_prepare_enable and clk_prepare_disable
When PM runtime is enabled in DaVinci and the machine migrates to
common clk framework, the clk_enable() gets called without
clk_prepare(). This patch is to fix this issue so that PM run
time can inter work with common clk framework.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:36:43 +01:00
Wei Yongjun ea83f81b48 PM / OPP: using kfree_rcu() to simplify the code
The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:36:10 +01:00
Nishanth Menon 0779726cc2 PM / OPP: predictable fail results for opp_find* functions, v2
Currently the opp_find* functions return -ENODEV when:
a) it cant find a device (e.g. request for an OPP search on device
   which was not registered)
b) When it cant find a match for the search strategy used

This makes life a little in-efficient for users such as devfreq
to make reasonable judgement before switching search strategies.

So, standardize the return results as following:
 -EINVAL for bad pointer parameters
 -ENODEV when device cannot be found
 -ERANGE when search fails

This has the following benefit for devfreq implementation:
The search fails when an unregistered device pointer is provided.
This is a trigger to change the search direction and search for
a better fit, however, if we cannot differentiate between a valid
search range failure Vs an unregistered device, second search goes
through the same fail return condition. This can be avoided by
appropriate handling of error return code.

With this change, we also fix devfreq for the improved search
strategy with updated error code.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:36:10 +01:00