@log_root_tree should not be referenced after kfree.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Chris Mason <clm@fb.com>
When we perform generic/092 in xfstests, output is like below:
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
0: [0..10239]: data
0: [0..10239]: data
-1: [10240..20479]: unwritten
+1: [10240..14335]: unwritten
This is because with this testcase, we redefine the regulation for
truncate in perallocated space past i_size as below:
"There was some confused about what the fs was supposed to do when you
truncate at i_size with preallocated space past i_size. We decided on the
following things.
1) truncate(i_size) will trim all blocks past i_size.
2) truncate(x) where x > i_size will not trim all blocks past i_size.
"
This method is used in xfs, and then ext4/btrfs will follow the rule.
This patch fixes to follow the new rule for f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fix a callback slot table regression.
Fixes: e937ee714b ("nfs: Only update callback sequnce id when CB_SEQUENCE success")
Cc: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
For a cb_layoutrecall replay, nfsd got CB_SEQUENCE status of zero,
but all informations of cb_sequenceres are zero too !!!
validate_seqid() return NFS4ERR_RETRY_UNCACHED_REP for a replay,
and skip the initlize cb_sequenceres.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A drop should really only be done when the frame is malformed or we have
reason to think that there is some sort of DoS going on. When we get an
RPC with bad auth, we should send back an error instead.
Cc: Andy Adamson <William.Adamson@netapp.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When testing pnfs layout, nfsd got error NFS4ERR_SEQ_MISORDERED.
It is caused by nfs return NFS4ERR_DELAY before validate_seqid(),
don't update the sequnce id, but nfsd updates the sequnce id !!!
According to RFC5661 20.9.3,
" If CB_SEQUENCE returns an error, then the state of the slot
(sequence ID, cached reply) MUST NOT change. "
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In little endian cases, the macro htonl unfolds to __swab32 which
provides special case for constants. In big endian cases,
__constant_htonl and htonl expand directly to the same expression.
So, replace __constant_htonl with htonl with the goal of getting
rid of the definition of __constant_htonl completely.
The semantic patch that performs this transformation is as follows:
@@expression x;@@
- __constant_htonl(x)
+ htonl(x)
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This was only ever set to nfs_writeback_release_common(), a function
which is completely empty. Let's just drop this function pointer and
simplify the code a bit.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
nfs4_proc_lookup_common is supposed to return a posix error, we have to
handle any error returned that isn't errno
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Frank S. Filz <ffilzlnx@mindspring.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Jerome reported seeing a warning pop when working with a swapfile on
NFS. The nfs_swap_activate can end up calling sk_set_memalloc while
holding the rcu_read_lock and that function can sleep.
To fix that, we need to take a reference to the xprt while holding the
rcu_read_lock, set the socket up for swapping and then drop that
reference. But, xprt_put is not exported and having NFS deal with the
underlying xprt is a bit of layering violation anyway.
Fix this by adding a set of activate/deactivate functions that take a
rpc_clnt pointer instead of an rpc_xprt, and have nfs_swap_activate and
nfs_swap_deactivate call those.
Also, add a per-rpc_clnt atomic counter to keep track of the number of
active swapfiles associated with it. When the counter does a 0->1
transition, we enable swapping on the xprt, when we do a 1->0 transition
we disable swapping on it.
This also allows us to be a bit more selective with the RPC_TASK_SWAPPER
flag. If non-swapper and swapper clnts are sharing a xprt, then we only
need to flag the tasks from the swapper clnt with that flag.
Acked-by: Mel Gorman <mgorman@suse.de>
Reported-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
btrfs will report no_space when we run following write and delete
file loop:
# FILE_SIZE_M=[ 75% of fs space ]
# DEV=[ some dev ]
# MNT=[ some dir ]
#
# mkfs.btrfs -f "$DEV"
# mount -o nodatacow "$DEV" "$MNT"
# for ((i = 0; i < 100; i++)); do dd if=/dev/zero of="$MNT"/file0 bs=1M count="$FILE_SIZE_M"; rm -f "$MNT"/file0; done
#
Reason:
iput() and evict() is run after write pages to block device, if
write pages work is not finished before next write, the "rm"ed space
is not freed, and caused above bug.
Fix:
We can add "-o flushoncommit" mount option to avoid above bug, but
it have performance problem. Actually, we can to wait for on-the-fly
writes only when no-space happened, it is which this patch do.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
qgroup.
Make snapshot accounting work with new extent-oriented mechanism by
skipping given root in new/old_roots in create_pending_snapshot().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This is used by later qgroup fix patches for snapshot.
As current snapshot accounting is done by btrfs_qgroup_inherit(), but
new extent oriented quota mechanism will account extent from
btrfs_copy_root() and other snapshot things, causing wrong result.
So add this ability to handle snapshot accounting.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This function will delete unode with given (val,aux) pair.
And with this patch, seqnum for debug usage doesn't have any meaning
now, so remove them.
This is used by later patches to skip snapshot root.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Since the self test transaction don't have delayed_ref_roots, so use
find_all_roots() and export btrfs_qgroup_account_extent() to simulate it
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Switch from old ref_node based qgroup to extent based qgroup mechanism
for normal operations.
The new mechanism should hugely reduce the overhead of btrfs quota
system, and further more, the codes and logic should be more clean and
easier to maintain.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Switch rescan to use the new new extent oriented mechanism.
As rescan is also based on extent, new mechanism is just a perfect match
for rescan.
With re-designed internal functions, rescan is quite easy, just call
btrfs_find_all_roots() and then btrfs_qgroup_account_one_extent().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_qgroup_account_extents().
The new btrfs_qgroup_account_extents() function should be called in
btrfs_commit_transaction() and it will update all the qgroup according
to delayed_ref_root->dirty_extent_root.
The new function can handle both normal operation during
commit_transaction() or in rescan in a unified method with clearer
logic.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_find_all_roots().
Allow btrfs_find_all_roots() to skip all delayed_ref_head lock and tree
lock to do tree search.
This is important for later qgroup implement which will call
find_all_roots() after fs trees are committed.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add function btrfs_qgroup_prepare_account_extents() to get old_roots
which are needed for qgroup.
We do it in commit_transaction() and before switch_roots(), and only
search commit_root, so it gives a quite accurate view for previous
transaction.
With old_roots from previous transaction, we can use it to do accurate
account with current transaction.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add hook in add_delayed_ref_head() to record quota-related extent record
into delayed_ref_root->dirty_extent_record rb-tree for later qgroup
accounting.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add function qgroup_update_counters(), which will update related
qgroups' rfer/excl according to old/new_roots.
This is one of the two core functions for the new qgroup implement.
This is based on btrfs_adjust_coutners() but with clearer logic and
comment.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This function is used to update refcnt for qgroups.
And is one of the two core functions used in the new qgroup implement.
This is based on the old update_old/new_refcnt, but provides a unified
logic and behavior.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
__btrfs_inc_extent_ref() and __btrfs_free_extent() have already had too
many parameters, but three of them can be extracted from
btrfs_delayed_ref_node struct.
So use btrfs_delayed_ref_node struct as a single parameter to replace
the bytenr/num_byte/no_quota parameters.
The real objective of this patch is to allow btrfs_qgroup_record_ref()
get the delayed_ref_node in incoming qgroup patches.
Other functions calling btrfs_qgroup_record_ref() are not affected since
the rest will only add/sub exclusive extents, where node is not used.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Use inline functions to do such things, to improve readability.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Acked-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Cleanup the rb_tree merge/insert/update functions, since now we use list
instead of rb_tree now.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch replace the rbtree used in ref_head to list.
This has the following advantage:
1) Easier merge logic.
With the new list implement, we only need to care merging the tail
ref_node with the new ref_node.
And this can be done quite easy at insert time, no need to do a
indicated merge at run_delayed_refs().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Old __merge_refs() in backref.c will even merge refs whose root_id are
different, which makes qgroup gives wrong result.
Fix it by checking ref_for_same_block() before any mode specific works.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
lockdep report following warning in test:
[25176.843958] =================================
[25176.844519] [ INFO: inconsistent lock state ]
[25176.845047] 4.1.0-rc3 #22 Tainted: G W
[25176.845591] ---------------------------------
[25176.846153] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[25176.846713] fsstress/26661 [HC0[0]:SC1[1]:HE1:SE0] takes:
[25176.847246] (&wr_ctx->wr_lock){+.?...}, at: [<ffffffffa04cdc6d>] scrub_free_ctx+0x2d/0xf0 [btrfs]
[25176.847838] {SOFTIRQ-ON-W} state was registered at:
[25176.848396] [<ffffffff810bf460>] __lock_acquire+0x6a0/0xe10
[25176.848955] [<ffffffff810bfd1e>] lock_acquire+0xce/0x2c0
[25176.849491] [<ffffffff816489af>] mutex_lock_nested+0x7f/0x410
[25176.850029] [<ffffffffa04d04ff>] scrub_stripe+0x4df/0x1080 [btrfs]
[25176.850575] [<ffffffffa04d11b1>] scrub_chunk.isra.19+0x111/0x130 [btrfs]
[25176.851110] [<ffffffffa04d144c>] scrub_enumerate_chunks+0x27c/0x510 [btrfs]
[25176.851660] [<ffffffffa04d3b87>] btrfs_scrub_dev+0x1c7/0x6c0 [btrfs]
[25176.852189] [<ffffffffa04e918e>] btrfs_dev_replace_start+0x36e/0x450 [btrfs]
[25176.852771] [<ffffffffa04a98e0>] btrfs_ioctl+0x1e10/0x2d20 [btrfs]
[25176.853315] [<ffffffff8121c5b8>] do_vfs_ioctl+0x318/0x570
[25176.853868] [<ffffffff8121c851>] SyS_ioctl+0x41/0x80
[25176.854406] [<ffffffff8164da17>] system_call_fastpath+0x12/0x6f
[25176.854935] irq event stamp: 51506
[25176.855511] hardirqs last enabled at (51506): [<ffffffff810d4ce5>] vprintk_emit+0x225/0x5e0
[25176.856059] hardirqs last disabled at (51505): [<ffffffff810d4b77>] vprintk_emit+0xb7/0x5e0
[25176.856642] softirqs last enabled at (50886): [<ffffffff81067a23>] __do_softirq+0x363/0x640
[25176.857184] softirqs last disabled at (50949): [<ffffffff8106804d>] irq_exit+0x10d/0x120
[25176.857746]
other info that might help us debug this:
[25176.858845] Possible unsafe locking scenario:
[25176.859981] CPU0
[25176.860537] ----
[25176.861059] lock(&wr_ctx->wr_lock);
[25176.861705] <Interrupt>
[25176.862272] lock(&wr_ctx->wr_lock);
[25176.862881]
*** DEADLOCK ***
Reason:
Above warning is caused by:
Interrupt
-> bio_endio()
-> ...
-> scrub_put_ctx()
-> scrub_free_ctx() *1
-> ...
-> mutex_lock(&wr_ctx->wr_lock);
scrub_put_ctx() is allowed to be called in end_bio interrupt, but
in code design, it will never call scrub_free_ctx(sctx) in interrupe
context(above *1), because btrfs_scrub_dev() get one additional
reference of sctx->refs, which makes scrub_free_ctx() only called
withine btrfs_scrub_dev().
Now the code runs out of our wish, because free sequence in
scrub_pending_bio_dec() have a gap.
Current code:
-----------------------------------+-----------------------------------
scrub_pending_bio_dec() | btrfs_scrub_dev
-----------------------------------+-----------------------------------
atomic_dec(&sctx->bios_in_flight); |
wake_up(&sctx->list_wait); |
| scrub_put_ctx()
| -> atomic_dec_and_test(&sctx->refs)
scrub_put_ctx(sctx); |
-> atomic_dec_and_test(&sctx->refs)|
-> scrub_free_ctx() |
-----------------------------------+-----------------------------------
We expected:
-----------------------------------+-----------------------------------
scrub_pending_bio_dec() | btrfs_scrub_dev
-----------------------------------+-----------------------------------
atomic_dec(&sctx->bios_in_flight); |
wake_up(&sctx->list_wait); |
scrub_put_ctx(sctx); |
-> atomic_dec_and_test(&sctx->refs)|
| scrub_put_ctx()
| -> atomic_dec_and_test(&sctx->refs)
| -> scrub_free_ctx()
-----------------------------------+-----------------------------------
Fix:
Move scrub_pending_bio_dec() to a workqueue, to avoid this function run
in interrupt context.
Tested by check tracelog in debug.
Changelog v1->v2:
Use workqueue instead of adjust function call sequence in v1,
because v1 will introduce a bug pointed out by:
Filipe David Manana <fdmanana@gmail.com>
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The extent-same code rejects requests with an unaligned length. This
poses a problem when we want to dedupe the tail extent of files as we
skip cloning the portion between i_size and the extent boundary.
If we don't clone the entire extent, it won't be deleted. So the
combination of these behaviors winds up giving us worst-case dedupe on
many files.
We can fix this by allowing a length that extents to i_size and
internally aligining those to the end of the block. This is what
btrfs_ioctl_clone() so we can just copy that check over.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
max_to_defrag represents the number of pages to defrag rather than the last
page of the file range to be defragged.
Consider a file having 10 4k blocks (i.e. blocks in the range [0 - 9]). If the
defrag ioctl was invoked for the block range [3 - 6], then max_to_defrag
should actually have the value 4. Instead in the current code we end up
setting it to 6.
Now, this does not (yet) cause an issue since the first part of the while loop
condition in btrfs_defrag_file() (i.e. "i <= last_index") causes the control
to flow out of the while loop before any buggy behavior is actually caused. So
the patch just makes sure that max_to_defrag ends up having the right value
rather than fixing a bug. I did run the xfstests suite to make sure that the
code does not regress.
Changelog: v1->v2:
Provide a much descriptive commit message.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Chris Mason <clm@fb.com>
Read-ahead is done for the pages in the range [ra_index, ra_index + cluster -
1]. So the next read-ahead should be starting from the page at index 'ra_index
+ cluster' (unless we deemed that the extent at 'ra_index + cluster' as
non-defraggable) rather than from the page at index 'ra_index +
max_cluster'. This patch fixes this. I did run the xfstests suite to make sure
that the code does not regress.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Chris Mason <clm@fb.com>
When allocating a new chunk or removing one we need to update num_devs
device items and insert or remove a chunk item in the chunk tree, so
in the worst case the space needed in the chunk space_info is:
btrfs_calc_trunc_metadata_size(chunk_root, num_devs) +
btrfs_calc_trans_metadata_size(chunk_root, 1)
That is, in the worst case we need to cow num_devs paths and cow 1 other
path that can result in splitting every node and leaf, and each path
consisting of BTRFS_MAX_LEVEL - 1 nodes and 1 leaf. We were requiring
some additional chunk_root->nodesize * BTRFS_MAX_LEVEL * num_devs bytes,
which were unnecessary since updating the existing device items does
not result in splitting the nodes and leaf since after updating them
they remain with the same size.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We don't need to attach ordered extents that have completed to the current
transaction. Doing so only makes us hold memory for longer than necessary
and delaying the iput of the inode until the transaction is committed (for
each created ordered extent we do an igrab and then schedule an asynchronous
iput when the ordered extent's reference count drops to 0), preventing the
inode from being evictable until the transaction commits.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit 3a8b36f378 ("Btrfs: fix data loss in the fast fsync path") added
a performance regression for that causes an unnecessary sync of the log
trees (fs/subvol and root log trees) when 2 consecutive fsyncs are done
against a file, without no writes or any metadata updates to the inode in
between them and if a transaction is committed before the second fsync is
called.
Huang Ying reported this to lkml (https://lkml.org/lkml/2015/3/18/99)
after a test sysbench test that measured a -62% decrease of file io
requests per second for that tests' workload.
The test is:
echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor
mkfs -t btrfs /dev/sda2
mount -t btrfs /dev/sda2 /fs/sda2
cd /fs/sda2
for ((i = 0; i < 1024; i++)); do fallocate -l 67108864 testfile.$i; done
sysbench --test=fileio --max-requests=0 --num-threads=4 --max-time=600 \
--file-test-mode=rndwr --file-total-size=68719476736 --file-io-mode=sync \
--file-num=1024 run
A test on kvm guest, running a debug kernel gave me the following results:
Without 3a8b36f378060d: 16.01 reqs/sec
With 3a8b36f378060d: 3.39 reqs/sec
With 3a8b36f378 and this patch: 16.04 reqs/sec
Reported-by: Huang Ying <ying.huang@intel.com>
Tested-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We cannot provide an efficient implementation due to the headers
on the data blocks, so there doesn't seem much point in having it.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch implements fallocate's FALLOC_FL_INSERT_RANGE for Ext4.
1) Make sure that both offset and len are block size aligned.
2) Update the i_size of inode by len bytes.
3) Compute the file's logical block number against offset. If the computed
block number is not the starting block of the extent, split the extent
such that the block number is the starting block of the extent.
4) Shift all the extents which are lying between [offset, last allocated extent]
towards right by len bytes. This step will make a hole of len bytes
at offset.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
In recovery procedure for superblock, we try to write data of valid
superblock into invalid one for recovery, work should be finished here,
but then still we will write the valid one with its original data.
This operation is not needed. Let's skip doing this unnecessary work.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For the first mount of f2fs image with realtime discard option, we will
disable discard option if device is not supported, but for remount
operation, our discard option can still be set, this should be avoided.
This patch moves configuring of discard option to parse_options() to fix
this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
jbd2_journal_get_write_access() and jbd2_journal_get_create_access() are
frequently called for buffers that are already part of the running
transaction - most frequently it is the case for bitmaps, inode table
blocks, and superblock. Since in such cases we have nothing to do, it is
unfortunate we still grab reference to journal head, lock the bh, lock
bh_state only to find out there's nothing to do.
Improving this is a bit subtle though since until we find out journal
head is attached to the running transaction, it can disappear from under
us because checkpointing / commit decided it's no longer needed. We deal
with this by protecting journal_head slab with RCU. We still have to be
careful about journal head being freed & reallocated within slab and
about exposing journal head in consistent state (in particular
b_modified and b_frozen_data must be in correct state before we allow
user to touch the buffer).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Check for the simple case of unjournaled buffer first, handle it and
bail out. This allows us to remove one if and unindent the difficult case
by one tab. The result is easier to read.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We were acquiring bh_state_lock when allocation of buffer failed in
do_get_write_access() only to be able to jump to a label that releases
the lock and does all other checks that don't make sense for this error
path. Just jump into the right label instead.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
needs_copy is set only in one place in do_get_write_access(), just move
the frozen buffer copying into that place and factor it out to a
separate function to make do_get_write_access() slightly more readable.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[ Added another sparse fix for EXT4_IOC_GET_ENCRYPTION_POLICY while
we're at it. --tytso ]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
One-line fix to cast quota value to s64 before comparison.
By default the quantity is treated as u64.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
During a source code review of fs/ext4/extents.c I noted identical
consecutive lines. An assertion is repeated for inode1 and never done
for inode2. This is not in keeping with the rest of the code in the
ext4_swap_extents function and appears to be a bug.
Assert that the inode2 mutex is not locked.
Signed-off-by: David Moore <dmoorefo@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Currently ext4_mb_good_group() only returns 0 or 1 depending on whether
the allocation group is suitable for use or not. However we might get
various errors and fail while initializing new group including -EIO
which would never get propagated up the call chain. This might lead to
an endless loop at writeback when we're trying to find a good group to
allocate from and we fail to initialize new group (read error for
example).
Fix this by returning proper error code from ext4_mb_good_group() and
using it in ext4_mb_regular_allocator(). In ext4_mb_regular_allocator()
we will always return only the first occurred error from
ext4_mb_good_group() and we only propagate it back to the caller if we
do not get any other errors and we fail to allocate any blocks.
Note that with other modes than errors=continue, we will fail
immediately in ext4_mb_good_group() in case of error, however with
errors=continue we should try to continue using the file system, that's
why we're not going to fail immediately when we see an error from
ext4_mb_good_group(), but rather when we fail to find a suitable block
group to allocate from due to an problem in group initialization.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently on the machines with page size > block size when initializing
block group buddy cache we initialize it for all the block group bitmaps
in the page. However in the case of read error, checksum error, or if
a single bitmap is in any way corrupted we would fail to initialize all
of the bitmaps. This is problematic because we will not have access to
the other allocation groups even though those might be perfectly fine
and usable.
Fix this by reading all the bitmaps instead of error out on the first
problem and simply skip the bitmaps which were either not read properly,
or are not valid.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we want to rely on the buffer_verified() flag of the block bitmap
buffer, we have to set it consistently. However currently if we're
initializing uninitialized block bitmap in
ext4_read_block_bitmap_nowait() we're not going to set buffer verified
at all.
We can do this by simply setting the flag on the buffer, but I think
it's actually better to run ext4_validate_block_bitmap() to make sure
that what we did in the ext4_init_block_bitmap() is right.
So run ext4_validate_block_bitmap() even after the block bitmap
initialization. Also bail out early from ext4_validate_block_bitmap() if
we see corrupt bitmap, since we already know it's corrupt and we do not
need to verify that.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On failure, v9fs_session_init() returns with the v9fs_session_info
struct partially initialized and expects the caller to invoke
v9fs_session_close() to clean it up; however, it doesn't track whether
the bdi is initialized or not and curiously invokes bdi_destroy() in
both vfs_session_init() failure path too.
A. If v9fs_session_init() fails before the bdi is initialized, the
follow-up v9fs_session_close() will invoke bdi_destroy() on an
uninitialized bdi.
B. If v9fs_session_init() fails after the bdi is initialized,
bdi_destroy() will be called twice on the same bdi - once in the
failure path of v9fs_session_init() and then by
v9fs_session_close().
A is broken no matter what. B used to be okay because bdi_destroy()
allowed being invoked multiple times on the same bdi, which BTW was
broken in its own way - if bdi_destroy() was invoked on an initialiezd
but !registered bdi, it'd fail to free percpu counters. Since
f0054bb1e1 ("writeback: move backing_dev_info->wb_lock and
->worklist into bdi_writeback"), this no longer work - bdi_destroy()
on an initialized but not registered bdi works correctly but multiple
invocations of bdi_destroy() is no longer allowed.
The obvious culprit here is v9fs_session_init()'s odd and broken error
behavior. It should simply clean up after itself on failures. This
patch makes the following updates to v9fs_session_init().
* @rc -> @retval error return propagation removed. It didn't serve
any purpose. Just use @rc.
* Move addition to v9fs_sessionlist to the end of the function so that
incomplete sessions are not put on the list or iterated and error
path doesn't have to worry about it.
* Update error handling so that it cleans up after itself.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This basically reverts 47def82672 (jbd2: Remove __GFP_NOFAIL from jbd2
layer). The deprecation of __GFP_NOFAIL was a bad choice because it led
to open coding the endless loop around the allocator rather than
removing the dependency on the non failing allocation. So the
deprecation was a clear failure and the reality tells us that
__GFP_NOFAIL is not even close to go away.
It is still true that __GFP_NOFAIL allocations are generally discouraged
and new uses should be evaluated and an alternative (pre-allocations or
reservations) should be considered but it doesn't make any sense to lie
the allocator about the requirements. Allocator can take steps to help
making a progress if it knows the requirements.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: David Rientjes <rientjes@google.com>
When testing pnfs layout, nfsd got error NFS4ERR_SEQ_MISORDERED.
It is caused by nfs return NFS4ERR_DELAY before validate_seqid(),
don't update the sequnce id, but nfsd updates the sequnce id !!!
According to RFC5661 20.9.3,
" If CB_SEQUENCE returns an error, then the state of the slot
(sequence ID, cached reply) MUST NOT change. "
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd enters a infinite loop and prints message every 10 seconds:
May 31 18:33:52 test-server kernel: Error sending entire callback!
May 31 18:34:01 test-server kernel: Error sending entire callback!
This is caused by a cb_layoutreturn getting error -10008
(NFS4ERR_DELAY), the client crashing, and then nfsd entering the
infinite loop:
bc_sendto --> call_timeout --> nfsd4_cb_done --> nfsd4_cb_layout_done
with error -10008 --> rpc_delay(task, HZ/100) --> bc_sendto ...
Reproduced using xfstests 074 with nfs client's kdump on,
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT set, and client's blkmapd down:
1. nfs client's write operation will get the layout of file,
and then send getdeviceinfo,
2. but layout segment is not recorded by client because blkmapd is down,
3. client writes data by sending WRITE to server,
4. nfs server recalls the layout of the file before WRITE,
5. network error causes the client reset the session and return NFS4ERR_DELAY,
6. so client's WRITE operation is waiting the reply.
If the task hangs 120s, the client will crash.
7. so that, the next bc_sendto will fail with TIMEOUT,
and cb_status is NFS4ERR_DELAY.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
EAGAIN is a valid return code from nfs4_open_recover(), and should
be handled by nfs4_handle_delegation_recall_error by simply passing
it through.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ignore an existing mount if the locked readonly, nodev or atime
attributes are less permissive than the desired attributes
of the new mount.
On success ensure the new mount locks all of the same readonly, nodev and
atime attributes as the old mount.
The nosuid and noexec attributes are not checked here as this change
is destined for stable and enforcing those attributes causes a
regression in lxc and libvirt-lxc where those applications will not
start and there are no known executables on sysfs or proc and no known
way to create exectuables without code modifications
Cc: stable@vger.kernel.org
Fixes: e51db73532 ("userns: Better restrictions on when proc and sysfs can be mounted")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Instead of the confusing flags argument pass a boolean flag to indicate if
we want to release or regrant a log reservation.
Also ensure that xfs_log_done always drop the reference on the log ticket,
to both simplify the code and make the logic in xfs_trans_roll easier
to understand.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The flags argument to xfs_trans_commit is not useful for most callers, as
a commit of a transaction without a permanent log reservation must pass
0 here, and all callers for a transaction with a permanent log reservation
except for xfs_trans_roll must pass XFS_TRANS_RELEASE_LOG_RES. So remove
the flags argument from the public xfs_trans_commit interfaces, and
introduce low-level __xfs_trans_commit variant just for xfs_trans_roll
that regrants a log reservation instead of releasing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_trans_cancel takes two flags arguments: XFS_TRANS_RELEASE_LOG_RES and
XFS_TRANS_ABORT. Both of them are a direct product of the transaction
state, and can be deducted:
- any dirty transaction needs XFS_TRANS_ABORT to be properly canceled,
and XFS_TRANS_ABORT is a noop for a transaction that is not dirty.
- any transaction with a permanent log reservation needs
XFS_TRANS_RELEASE_LOG_RES to be properly canceled, and passing
XFS_TRANS_RELEASE_LOG_RES for a transaction without a permanent
log reservation is invalid.
So just remove the flags argument and do the right thing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The flags value always was 0 or XFS_TRANS_ABORT. Switch to a bool
parameter to allow further cleanups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We have three remaining callers of xfs_trans_dup:
- xfs_itruncate_extents which open codes xfs_trans_roll
- xfs_bmap_finish doesn't have an xfs_inode argument and thus leaves
attaching them to it's callers, but otherwise is identical to
xfs_trans_roll
- xfs_dir_ialloc looks at the log reservations in the old xfs_trans
structure instead of the log reservation parameters, but otherwise
is identical to xfs_trans_roll.
By allowing a NULL xfs_inode argument to xfs_trans_roll we can switch
these three remaining users over to xfs_trans_roll and mark xfs_trans_dup
static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The inode allocator enables random sparse inode chunk allocations in
DEBUG mode to facilitate testing. Sparse inode allocations are not
always possible, however, depending on the fs geometry. For example,
there is no possibility for a sparse inode allocation on filesystems
where the block size is large enough to fit one or more inode chunks
within a single block.
Fix up the DEBUG mode sparse inode allocation logic to trigger random
sparse allocations only when the geometry of the fs allows it.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The kbuild test robot reports the following compilation failure with a
32-bit kernel configuration:
fs/built-in.o: In function `xfs_ifree_cluster':
>> xfs_inode.c:(.text+0x17ac84): undefined reference to `__umoddi3'
This is due to the use of the modulus operator on a 64-bit variable in
the ASSERT() added as part of the following commit:
xfs: skip unallocated regions of inode chunks in xfs_ifree_cluster()
This ASSERT() simply checks that the offset of the inode in a sparse
cluster is appropriately aligned. Since the maximum inode record offset
is 63 (for a 64 inode record) and the calculated offset here should be
something less than that, just use a 32-bit variable to store the offset
and call the do_mod() helper.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add initial DAX support to XFS. To do this we need a new mount
option to turn DAX on filesystem, and we need to propagate this into
the inode flags whenever an inode is instantiated so that the
per-inode checks throughout the code Do The Right Thing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
DAX does not do buffered IO (can't buffer direct access!) and hence
all read/write IO is vectored through the direct IO path. Hence we
need to add the DAX IO path callouts to the direct IO
infrastructure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we truncate a DAX file, we need to call through the DAX page
truncation path rather than through block_truncate_page() so that
mappings and block zeroing are all handled correctly. Otherwise,
truncate does not need to change.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add initial support for DAX block zeroing operations to XFS. DAX
cannot use buffered IO through the page cache for zeroing, nor do we
need to issue IO for uncached block zeroing. In both cases, we can
simply call out to the dax block zeroing function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add the initial support for DAX file operations to XFS. This
includes the necessary block allocation and mmap page fault hooks
for DAX to function.
Note that there are changes to the splice interfaces to ensure that
for DAX splice avoids direct page cache manipulations and instead
takes the DAX IO paths for read/write operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some filesystems cannot call dax_fault() directly because they have
different locking and/or allocation constraints in the page fault IO
path. To handle this, we need to follow the same model as the
generic block_page_mkwrite code, where the internals are exposed via
__block_page_mkwrite() so that filesystems can wrap the correct
locking and operations around the outside.
This is loosely based on a patch originally from Matthew Willcox.
Unlike the original patch, it does not change ext4 code, error
returns or unwritten extent conversion handling. It also adds a
__dax_mkwrite() wrapper for .page_mkwrite implementations to do the
right thing, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
dax_fault() currently relies on the get_block callback to attach an
io completion callback to the mapping buffer head so that it can
run unwritten extent conversion after zeroing allocated blocks.
Instead of this hack, pass the conversion callback directly into
dax_fault() similar to the get_block callback. When the filesystem
allocates unwritten extents, it will set the buffer_unwritten()
flag, and hence the dax_fault code can call the completion function
in the contexts where it is necessary without overloading the
mapping buffer head.
Note: The changes to ext4 to use this interface are suspect at best.
In fact, the way ext4 did this end_io assignment in the first place
looks suspect because it only set a completion callback when there
wasn't already some other write() call taking place on the same
inode. The ext4 end_io code looks rather intricate and fragile with
all it's reference counting and passing to different contexts for
modification via inode private pointers that aren't protected by
locks...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Lock ordering for the new mmap lock needs to be:
mmap_sem
sb_start_pagefault
i_mmap_lock
page lock
<fault processsing>
Right now xfs_vm_page_mkwrite gets this the wrong way around,
While technically it cannot deadlock due to the current freeze
ordering, it's still a landmine that might explode if we change
anything in future. Hence we need to nest the locks correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Previously we allocated bounce pages using a combination of
alloc_page() and mempool_alloc() with the __GFP_WAIT bit set.
Instead, use mempool_alloc() with GFP_NOWAIT. The mempool_alloc()
function will try using alloc_pages() initially, and then only use the
mempool reserve of pages if alloc_pages() is unable to fulfill the
request.
This minimizes the the impact on the mm layer when we need to do a
large amount of writeback of encrypted files, as Jaeguk Kim had
reported that under a heavy fio workload on a system with restricted
amounts memory (which unfortunately, includes many mobile handsets),
he had observed the the OOM killer getting triggered several times.
Using GFP_NOWAIT
If the mempool_alloc() function fails, we will retry the page
writeback at a later time; the function of the mempool is to ensure
that we can writeback at least 32 pages at a time, so we can more
efficiently dispatch I/O under high memory pressure situations. In
the future we should make this be a tunable so we can determine the
best tradeoff between permanently sequestering memory and the ability
to quickly launder pages so we can free up memory quickly when
necessary.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Zygo Blaxell and other users have reported occasional hangs while an
inode is being evicted, leading to traces like the following:
[ 5281.972322] INFO: task rm:20488 blocked for more than 120 seconds.
[ 5281.973836] Not tainted 4.0.0-rc5-btrfs-next-9+ #2
[ 5281.974818] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5281.976364] rm D ffff8800724cfc38 0 20488 7747 0x00000000
[ 5281.977506] ffff8800724cfc38 ffff8800724cfc38 ffff880065da5c50 0000000000000001
[ 5281.978461] ffff8800724cffd8 ffff8801540a5f50 0000000000000008 ffff8801540a5f78
[ 5281.979541] ffff8801540a5f50 ffff8800724cfc58 ffffffff8143107e 0000000000000123
[ 5281.981396] Call Trace:
[ 5281.982066] [<ffffffff8143107e>] schedule+0x74/0x83
[ 5281.983341] [<ffffffffa03b33cf>] wait_on_state+0xac/0xcd [btrfs]
[ 5281.985127] [<ffffffff81075cd6>] ? signal_pending_state+0x31/0x31
[ 5281.986715] [<ffffffffa03b4b71>] wait_extent_bit.constprop.32+0x7c/0xde [btrfs]
[ 5281.988680] [<ffffffffa03b540b>] lock_extent_bits+0x5d/0x88 [btrfs]
[ 5281.990200] [<ffffffffa03a621d>] btrfs_evict_inode+0x24e/0x5be [btrfs]
[ 5281.991781] [<ffffffff8116964d>] evict+0xa0/0x148
[ 5281.992735] [<ffffffff8116a43d>] iput+0x18f/0x1e5
[ 5281.993796] [<ffffffff81160d4a>] do_unlinkat+0x15b/0x1fa
[ 5281.994806] [<ffffffff81435b54>] ? ret_from_sys_call+0x1d/0x58
[ 5281.996120] [<ffffffff8107d314>] ? trace_hardirqs_on_caller+0x18f/0x1ab
[ 5281.997562] [<ffffffff8123960b>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 5281.998815] [<ffffffff81161a16>] SyS_unlinkat+0x29/0x2b
[ 5281.999920] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[ 5282.001299] 1 lock held by rm/20488:
[ 5282.002066] #0: (sb_writers#12){.+.+.+}, at: [<ffffffff8116dd81>] mnt_want_write+0x24/0x4b
This happens when we have readahead, which calls readpages(), happening
right before the inode eviction handler is invoked. So the reason is
essentially:
1) readpages() is called while a reference on the inode is held, so
eviction can not be triggered before readpages() returns. It also
locks one or more ranges in the inode's io_tree (which is done at
extent_io.c:__do_contiguous_readpages());
2) readpages() submits several read bios, all with an end io callback
that runs extent_io.c:end_bio_extent_readpage() and that is executed
by other task when a bio finishes, corresponding to a work queue
(fs_info->end_io_workers) worker kthread. This callback unlocks
the ranges in the inode's io_tree that were previously locked in
step 1;
3) readpages() returns, the reference on the inode is dropped;
4) One or more of the read bios previously submitted are still not
complete (their end io callback was not yet invoked or has not
yet finished execution);
5) Inode eviction is triggered (through an unlink call for example).
The inode reference count was not incremented before submitting
the read bios, therefore this is possible;
6) The eviction handler starts executing and enters the loop that
iterates over all extent states in the inode's io_tree;
7) The loop picks one extent state record and uses its ->start and
->end fields, after releasing the inode's io_tree spinlock, to
call lock_extent_bits() and clear_extent_bit(). The call to lock
the range [state->start, state->end] blocks because the whole
range or a part of it was locked by the previous call to
readpages() and the corresponding end io callback, which unlocks
the range was not yet executed;
8) The end io callback for the read bio is executed and unlocks the
range [state->start, state->end] (or a superset of that range).
And at clear_extent_bit() the extent_state record state is used
as a second argument to split_state(), which sets state->start to
a larger value;
9) The task executing the eviction handler is woken up by the task
executing the bio's end io callback (through clear_state_bit) and
the eviction handler locks the range
[old value for state->start, state->end]. Shortly after, when
calling clear_extent_bit(), it unlocks the range
[new value for state->start, state->end], so it ends up unlocking
only part of the range that it locked, leaving an extent state
record in the io_tree that represents the unlocked subrange;
10) The eviction handler loop, in its next iteration, gets the
extent_state record for the subrange that it did not unlock in the
previous step and then tries to lock it, resulting in an hang.
So fix this by not using the ->start and ->end fields of an existing
extent_state record. This is a simple solution, and an alternative
could be to bump the inode's reference count before submitting each
read bio and having it dropped in the bio's end io callback. But that
would be a more invasive/complex change and would not protect against
other possible places that are not holding a reference on the inode
as well. Something to consider in the future.
Many thanks to Zygo Blaxell for reporting, in the mailing list, the
issue, a set of scripts to trigger it and testing this fix.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Tested-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The return value of read_tree_block() can confuse callers as it always
returns NULL for either -ENOMEM or -EIO, so it's likely that callers
parse it to a wrong error, for instance, in btrfs_read_tree_root().
This fixes the above issue.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
read_tree_block may take a reference on the 'eb', a following
free_extent_buffer is necessary.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
After commit 8407f55326
("Btrfs: fix data corruption after fast fsync and writeback error"),
during wait_ordered_extents(), we wait for ordered extent setting
BTRFS_ORDERED_IO_DONE or BTRFS_ORDERED_IOERR, at which point we've
already got checksum information, so we don't need to check
(csum_bytes_left == 0) in the whole logging path.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Unlike when attempting to allocate a new block group, where we check
that we have enough space in the system space_info to update the device
items and insert a new chunk item in the chunk tree, we were not checking
if the system space_info had enough space for updating the device items
and deleting the chunk item in the chunk tree. This often lead to -ENOSPC
error when attempting to allocate blocks for the chunk tree (during btree
node/leaf COW operations) while updating the device items or deleting the
chunk item, which resulted in the current transaction being aborted and
turning the filesystem into read-only mode.
While running fstests generic/038, which stresses allocation of block
groups and removal of unused block groups, with a large scratch device
(750Gb) this happened often, despite more than enough unallocated space,
and resulted in the following trace:
[68663.586604] WARNING: CPU: 3 PID: 1521 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]()
[68663.600407] BTRFS: Transaction aborted (error -28)
(...)
[68663.730829] Call Trace:
[68663.732585] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[68663.734334] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[68663.739980] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[68663.757153] [<ffffffffa036ca6d>] ? __btrfs_abort_transaction+0x52/0x114 [btrfs]
[68663.760925] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[68663.762854] [<ffffffffa03b159d>] ? btrfs_update_device+0x15a/0x16c [btrfs]
[68663.764073] [<ffffffffa036ca6d>] __btrfs_abort_transaction+0x52/0x114 [btrfs]
[68663.765130] [<ffffffffa03b3638>] btrfs_remove_chunk+0x597/0x5ee [btrfs]
[68663.765998] [<ffffffffa0384663>] ? btrfs_delete_unused_bgs+0x245/0x296 [btrfs]
[68663.767068] [<ffffffffa0384676>] btrfs_delete_unused_bgs+0x258/0x296 [btrfs]
[68663.768227] [<ffffffff8143527f>] ? _raw_spin_unlock_irq+0x2d/0x4c
[68663.769081] [<ffffffffa038b109>] cleaner_kthread+0x13d/0x16c [btrfs]
[68663.799485] [<ffffffffa038afcc>] ? btrfs_alloc_root+0x28/0x28 [btrfs]
[68663.809208] [<ffffffff8105f367>] kthread+0xef/0xf7
[68663.828795] [<ffffffff810e603f>] ? time_hardirqs_on+0x15/0x28
[68663.844942] [<ffffffff8105f278>] ? __kthread_parkme+0xad/0xad
[68663.846486] [<ffffffff81435a88>] ret_from_fork+0x58/0x90
[68663.847760] [<ffffffff8105f278>] ? __kthread_parkme+0xad/0xad
[68663.849503] ---[ end trace 798477c6d6dbaad6 ]---
[68663.850525] BTRFS: error (device sdc) in btrfs_remove_chunk:2652: errno=-28 No space left
So fix this by verifying that enough space exists in system space_info,
and reserving the space in the chunk block reserve, before attempting to
delete the block group and allocate a new system chunk if we don't have
enough space to perform the necessary updates and delete in the chunk
tree. Like for the block group creation case, we don't error our if we
fail to allocate a new system chunk, since we might end up not needing
it (no node/leaf splits happen during the COW operations and/or we end
up not needing to COW any btree nodes or leafs because they were already
COWed in the current transaction and their writeback didn't start yet).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
While creating a block group, we often end up getting ENOSPC while updating
the chunk tree, which leads to a transaction abortion that produces a trace
like the following:
[30670.116368] WARNING: CPU: 4 PID: 20735 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]()
[30670.117777] BTRFS: Transaction aborted (error -28)
(...)
[30670.163567] Call Trace:
[30670.163906] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[30670.164522] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[30670.165171] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[30670.166323] [<ffffffffa035daa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs]
[30670.167213] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[30670.167862] [<ffffffffa035daa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs]
[30670.169116] [<ffffffffa03743d7>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs]
[30670.170593] [<ffffffffa038426a>] __btrfs_end_transaction+0x84/0x366 [btrfs]
[30670.171960] [<ffffffffa038455c>] btrfs_end_transaction+0x10/0x12 [btrfs]
[30670.174649] [<ffffffffa036eb6b>] btrfs_check_data_free_space+0x11f/0x27c [btrfs]
[30670.176092] [<ffffffffa039450d>] btrfs_fallocate+0x7c8/0xb96 [btrfs]
[30670.177218] [<ffffffff812459f2>] ? __this_cpu_preempt_check+0x13/0x15
[30670.178622] [<ffffffff81152447>] vfs_fallocate+0x14c/0x1de
[30670.179642] [<ffffffff8116b915>] ? __fget_light+0x2d/0x4f
[30670.180692] [<ffffffff81152863>] SyS_fallocate+0x47/0x62
[30670.186737] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[30670.187792] ---[ end trace 0373e6b491c4a8cc ]---
This is because we don't do proper space reservation for the chunk block
reserve when we have multiple tasks allocating chunks in parallel.
So block group creation has 2 phases, and the first phase essentially
checks if there is enough space in the system space_info, allocating a
new system chunk if there isn't, while the second phase updates the
device, extent and chunk trees. However, because the updates to the
chunk tree happen in the second phase, if we have N tasks, each with
its own transaction handle, allocating new chunks in parallel and if
there is only enough space in the system space_info to allocate M chunks,
where M < N, none of the tasks ends up allocating a new system chunk in
the first phase and N - M tasks will get -ENOSPC when attempting to
update the chunk tree in phase 2 if they need to COW any nodes/leafs
from the chunk tree.
Fix this by doing proper reservation in the chunk block reserve.
The issue could be reproduced by running fstests generic/038 in a loop,
which eventually triggered the problem.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Now that we're guaranteed to have a meaningful root dentry, we can just
export seq_dentry() and use it in btrfs_show_options(). The subvolume ID
is easy to get and can also be useful, so put that in there, too.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, mounting a subvolume with subvolid= takes a different code
path than mounting with subvol=. This isn't really a big deal except for
the fact that mounts done with subvolid= or the default subvolume don't
have a dentry that's connected to the dentry tree like in the subvol=
case. To unify the code paths, when given subvolid= or using the default
subvolume ID, translate it into a subvolume name by walking
ROOT_BACKREFs in the root tree and INODE_REFs in the filesystem trees.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
There's nothing to stop a user from passing both subvol= and subvolid=
to mount, but if they don't refer to the same subvolume, someone is
going to be surprised at some point. Error out on this case, but allow
users to pass in both if they do match (which they could, for example,
get out of /proc/mounts).
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
In preparation for new functionality in mount_subvol(), give it
ownership of subvol_name and tidy up the error paths.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, setup_root_args() substitutes 's/subvol=[^,]*/subvolid=0/'.
But, this means that if the user passes both a subvol and subvolid for
some reason, we won't actually mount the top-level when we recursively
mount. For example, consider:
mkfs.btrfs -f /dev/sdb
mount /dev/sdb /mnt
btrfs subvol create /mnt/subvol1 # subvolid=257
btrfs subvol create /mnt/subvol2 # subvolid=258
umount /mnt
mount -osubvol=/subvol1,subvolid=258 /dev/sdb /mnt
In the final mount, subvol=/subvol1,subvolid=258 becomes
subvolid=0,subvolid=258, and the last option takes precedence, so we
mount subvol2 and try to look up subvol1 inside of it, which fails.
So, instead, do a thorough scan through the argument list and remove any
subvol= and subvolid= options, then append subvolid=0 to the end. This
implicitly makes subvol= take precedence over subvolid=, but we're about
to add a stricter check for that. This also makes setup_root_args() more
generic, which we'll need soon.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
Since commit 0723a0473f ("btrfs: allow mounting btrfs subvolumes with
different ro/rw options"), when mounting a subvolume read/write when
another subvolume has previously been mounted read-only, we first do a
remount. However, this should be done with the superblock locked, as per
sync_filesystem():
/*
* We need to be protected against the filesystem going from
* r/o to r/w or vice versa.
*/
WARN_ON(!rwsem_is_locked(&sb->s_umount));
This WARN_ON can easily be hit with:
mkfs.btrfs -f /dev/vdb
mount /dev/vdb /mnt
btrfs subvol create /mnt/vol1
btrfs subvol create /mnt/vol2
umount /mnt
mount -oro,subvol=/vol1 /dev/vdb /mnt
mount -orw,subvol=/vol2 /dev/vdb /mnt2
Fixes: 0723a0473f ("btrfs: allow mounting btrfs subvolumes with different ro/rw options")
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we clear an extent state's EXTENT_LOCKED bit with clear_extent_bits()
through free_io_failure(), we weren't waking up any tasks waiting for the
extent's state EXTENT_LOCKED bit, leading to an hang.
So make sure clear_extent_bits() ends up waking up any waiters if the
bit EXTENT_LOCKED is supplied by its callers.
Zygo Blaxell was experiencing such hangs at inode eviction time after
file unlinks. Thanks to him for a set of scripts to reproduce the issue.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
With commit 1b98450816 ("Btrfs: fix find_free_dev_extent() malfunction
in case device tree has hole") introduced in the kernel 4.1 merge window,
we end up using part of a device hole for which there are already pending
chunks or pinned chunks. Before that commit we didn't use the hole and
would just move on to the next hole in the device.
However when we adjust the start offset for the chunk allocation and we
have pinned chunks, we set it blindly to the end offset of the pinned
chunk we are currently processing, which is dangerous because we can
have a pending chunk that has a start offset that matches the end offset
of our pinned chunk - leading us to a case where we end up getting two
pending chunks that start at the same physical device offset, which makes
us later abort the current transaction with -EEXIST when finishing the
chunk allocation at btrfs_create_pending_block_groups():
[194737.659017] ------------[ cut here ]------------
[194737.660192] WARNING: CPU: 15 PID: 31111 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]()
[194737.662209] BTRFS: Transaction aborted (error -17)
[194737.663175] Modules linked in: btrfs dm_snapshot dm_bufio dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse
[194737.674015] CPU: 15 PID: 31111 Comm: xfs_io Tainted: G W 4.0.0-rc5-btrfs-next-9+ #2
[194737.675986] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[194737.682999] 0000000000000009 ffff8800564c7a98 ffffffff8142fa46 ffffffff8108b6a2
[194737.684540] ffff8800564c7ae8 ffff8800564c7ad8 ffffffff81045ea5 ffff8800564c7b78
[194737.686017] ffffffffa0383aa7 00000000ffffffef ffff88000c7ba000 ffff8801a1f66f40
[194737.687509] Call Trace:
[194737.688068] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[194737.689027] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[194737.690095] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[194737.691198] [<ffffffffa0383aa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs]
[194737.693789] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[194737.695065] [<ffffffffa0383aa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs]
[194737.696806] [<ffffffffa039a3bd>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs]
[194737.698683] [<ffffffffa03aa433>] __btrfs_end_transaction+0x84/0x366 [btrfs]
[194737.700329] [<ffffffffa03aa725>] btrfs_end_transaction+0x10/0x12 [btrfs]
[194737.701924] [<ffffffffa0394b51>] btrfs_check_data_free_space+0x11f/0x27c [btrfs]
[194737.703675] [<ffffffffa03b8ba4>] __btrfs_buffered_write+0x16a/0x4c8 [btrfs]
[194737.705417] [<ffffffffa03bb502>] ? btrfs_file_write_iter+0x19a/0x431 [btrfs]
[194737.707058] [<ffffffffa03bb511>] ? btrfs_file_write_iter+0x1a9/0x431 [btrfs]
[194737.708560] [<ffffffffa03bb68d>] btrfs_file_write_iter+0x325/0x431 [btrfs]
[194737.710673] [<ffffffff81067d85>] ? get_parent_ip+0xe/0x3e
[194737.712076] [<ffffffff811534c3>] new_sync_write+0x7c/0xa0
[194737.713293] [<ffffffff81153b58>] vfs_write+0xb2/0x117
[194737.714443] [<ffffffff81154424>] SyS_pwrite64+0x64/0x82
[194737.715646] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[194737.717175] ---[ end trace f2d5dc04e56d7e48 ]---
[194737.718170] BTRFS: error (device sdc) in btrfs_create_pending_block_groups:9524: errno=-17 Object already exists
The -EEXIST failure comes from btrfs_finish_chunk_alloc(), called by
btrfs_create_pending_block_groups(), when it attempts to insert a
duplicated device extent item via btrfs_alloc_dev_extent().
This issue was reproducible with fstests generic/038 running in a loop for
several hours (it's very hard to hit) and using MOUNT_OPTIONS="-o discard".
Applying Jeff's recent patch titled "btrfs: add missing discards when
unpinning extents with -o discard" makes the issue much easier to reproduce
(usually within 4 to 5 hours), since it pins chunks for longer periods of
time when an unused block group is deleted by the cleaner kthread.
Fix this by making sure that we never adjust the start offset to a lower
value than it currently has.
Fixes: 1b98450816 ("Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
__btrfs_close_devices() would call_rcu to free the device, which is racy with
list_for_each_entry() accessing the memory to retrieve the next device on the
list.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The INO_LOOKUP ioctl can lookup path for a given inode number and is
thus restricted. As a sideefect it can find the root id of the
containing subvolume and we're using this int the 'btrfs inspect rootid'
command.
The restriction is unnecessary in case we set the ioctl args
args::treeid = 0
args::objectid = 256 (BTRFS_FIRST_FREE_OBJECTID)
Then the path will be empty and the treeid is filled with the root id of
the inode on which the ioctl is called. This behaviour is unchanged,
after the root restriction is removed.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Report missing device when add is successful,
otherwise it would exit as ENOMEM. And add uuid
to the report.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Old csum type check is wrong and can't catch csum_type 1(not supported).
Fix it to avoid hostile 0 division.
Reported-by: Lukas Lueg <lukas.lueg@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Marc reported a problem where the receiving end of an incremental send
was performing clone operations that failed with -EINVAL. This happened
because, unlike for uncompressed extents, we were not checking if the
source clone offset and length, after summing the data offset, falls
within the source file's boundaries.
So make sure we do such checks when attempting to issue clone operations
for compressed extents.
Problem reproducible with the following steps:
$ mkfs.btrfs -f /dev/sdb
$ mount -o compress /dev/sdb /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount -o compress /dev/sdc /mnt2
# Create the file with a single extent of 128K. This creates a metadata file
# extent item with a data start offset of 0 and a logical length of 128K.
$ xfs_io -f -c "pwrite -S 0xaa 64K 128K" -c "fsync" /mnt/foo
# Now rewrite the range 64K to 112K of our file. This will make the inode's
# metadata continue to point to the 128K extent we created before, but now
# with an extent item that points to the extent with a data start offset of
# 112K and a logical length of 16K.
# That metadata file extent item is associated with the logical file offset
# at 176K and covers the logical file range 176K to 192K.
$ xfs_io -c "pwrite -S 0xbb 64K 112K" -c "fsync" /mnt/foo
# Now rewrite the range 180K to 12K. This will make the inode's metadata
# continue to point the the 128K extent we created earlier, with a single
# extent item that points to it with a start offset of 112K and a logical
# length of 4K.
# That metadata file extent item is associated with the logical file offset
# at 176K and covers the logical file range 176K to 180K.
$ xfs_io -c "pwrite -S 0xcc 180K 12K" -c "fsync" /mnt/foo
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ touch /mnt/bar
# Calls the btrfs clone ioctl.
$ ~/xfstests/src/cloner -s $((176 * 1024)) -d $((176 * 1024)) \
-l $((4 * 1024)) /mnt/foo /mnt/bar
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs send /mnt/snap1 | btrfs receive /mnt2
At subvol /mnt/snap1
At subvol snap1
$ btrfs send -p /mnt/snap1 /mnt/snap2 | btrfs receive /mnt2
At subvol /mnt/snap2
At snapshot snap2
ERROR: failed to clone extents to bar
Invalid argument
A test case for fstests follows soon.
Reported-by: Marc MERLIN <marc@merlins.org>
Tested-by: Marc MERLIN <marc@merlins.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: David Sterba <dsterba@suse.cz>
Tested-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit 9c8b35b1ba ("btrfs: quota: Automatically update related qgroups or
mark INCONSISTENT flags when assigning/deleting a qgroup relations.")
introduced the allocation of a temporary ulist in function
btrfs_add_qgroup_relation() and added the corresponding cleanup to the out
path. However, the allocation was introduced before the src/dst level check
that directly returns. Fix the possible leakage of the ulist by moving the
allocation after the input validation. Detected by Coverity CID 1295988.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
If the call to btrfs_truncate_inode_items() failed and we don't have a block
group, we were unlocking the cache_write_mutex without having locked it (we
do it only if we have a block group).
Fixes: 1bbc621ef2 ("Btrfs: allow block group cache writeout
outside critical section in commit")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
fs/btrfs/volumes.c: In function ‘btrfs_create_uuid_tree’:
fs/btrfs/volumes.c:3909:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long int’ [-Wformat=]
btrfs_abort_transaction(trans, tree_root,
^
CC [M] fs/btrfs/ioctl.o
fs/btrfs/ioctl.c: In function ‘create_subvol’:
fs/btrfs/ioctl.c:549:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long int’ [-Wformat=]
btrfs_abort_transaction(trans, root, PTR_ERR(new_root));
PTR_ERR returns long, but we're really using 'int' for the error codes
everywhere so just set and use the local variable.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The annotated functios will be placed into .text.unlikely section. The
annotation also hints compiler to move the code out of the hot paths,
and may implicitly mark if-statement leading to that block as unlikely.
This is a heuristic, the impact on the generated code is not
significant.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
WARN is called from a single location and all bugreports say that's in
super.c __btrfs_abort_transaction. This is slightly confusing as we'd
rather want to know the exact callsite. Whereas this information is
printed in the syslog below the stacktrace, this requires further look
and we usually see only the headline from WARNING.
Moving the WARN into the macro has to inline some code and increases
code by a few kilobytes:
text data bss dec hex filename
835481 20305 14120 869906 d4612 btrfs.ko.before
842883 20305 14120 877308 d62fc btrfs.ko.after
The delta is +7k (130+ calls), measured on 3.19 x86_64, distro config.
The increase is not small and could lead to worse icache use. The code
is on error/exit paths that can be recognized by compiler as cold and
moved out of the way so the impact is speculated to be low, if
measurable at all.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Long time ago (2008) the defrag was automatic for new b-tree writes but
has been disabled after performance problems. There was a leftover in
tree-defrag.c that effectively stops any defragmentation on b-trees.
This is a bit unexpected and IMHO undesired. The SSD mode is an
optimization and defrag is supposed to work if the users asks for it.
Related commits:
6702ed490c
Btrfs: Add run time btree defrag, and an ioctl to force btree defrag
e18e4809b1
Btrfs: Add mount -o ssd, which includes optimizations for seek free
storage
b3236e68bf
Btrfs: Leave on the tree defragger in mount -o ssd, it still helps there
9afbb0b752
Btrfs: Disable tree defrag in SSD mode
The last three commits switch the defrag+ssd off/on/off and the last one
3f157a2fd2
Btrfs: Online btree defragmentation fixes
misses the bits from tree-defrag.c to revert to the behaviour introduced
in e18e4809b1.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
When we shrink the usable size of a device (its total_bytes), we go over
all the device extent items in the device tree and attempt to relocate
the chunk of any device extent that goes beyond the new usable size for
the device. We do that after setting the new usable size (total_bytes) in
the device object, so that all new allocations (and reallocations) don't
use areas of the device that go beyond the new (shorter) size. However we
were not considering that before setting the new size in the device,
pending chunks might have been created that use device extents that go
beyond the new size, and those device extents are not yet in the device
tree after we search the device tree - they are still attached to the
list of new block group for some ongoing transaction handle, and they are
only added to the device tree when the transaction handle is ended (via
btrfs_create_pending_block_groups()).
So check for pending chunks with device extents that go beyond the new
size and if any exists, commit the current transaction and repeat the
search in the device tree.
Not doing this it would mean we would return success to user space while
still having extents that go beyond the new size, and later user space
could override those locations on the device while the fs still references
them, causing all sorts of corruption and unexpected events.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Since commit bafc9b754f ("vfs: More precise tests in d_invalidate"),
mounted subvolumes can be deleted because d_invalidate() won't fail.
However, we run into problems when we attempt to delete the default
subvolume while it is mounted as the root filesystem:
# btrfs subvol list /
ID 257 gen 306 top level 5 path rootvol
ID 267 gen 334 top level 5 path snap1
# btrfs subvol get-default /
ID 267 gen 334 top level 5 path snap1
# btrfs inspect-internal rootid /
267
# mount -o subvol=/ /dev/vda1 /mnt
# btrfs subvol del /mnt/snap1
Delete subvolume (no-commit): '/mnt/snap1'
ERROR: cannot delete '/mnt/snap1' - Operation not permitted
# findmnt /
findmnt: can't read /proc/mounts: No such file or directory
# ls /proc
#
Markus reported that this same scenario simply led to a kernel oops.
This happens because in btrfs_ioctl_snap_destroy(), we call
d_invalidate() before we check may_destroy_subvol(), which means that we
detach the submounts and drop the dentry before erroring out. Instead,
we should only invalidate the dentry once the deletion has succeeded.
Additionally, the shrink_dcache_sb() isn't necessary; d_invalidate()
will prune the dcache for the deleted subvolume.
Cc: <stable@vger.kernel.org>
Fixes: bafc9b754f ("vfs: More precise tests in d_invalidate")
Reported-by: Markus Schauler <mschauler@gmail.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
If a directory inode is orphanized, because some inode previously
processed has a new name that collides with the old name of the current
inode, we need to check if it needs its rename operation delayed too,
as its ancestor-descendent relationship with some other inode might
have been reversed between the parent and send snapshots and therefore
its rename operation needs to happen after that other inode is renamed.
For example, for the following reproducer where this is needed (provided
by Robbie Ko):
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt2
$ mkdir -p /mnt/data/n1/n2
$ mkdir /mnt/data/n4
$ mkdir -p /mnt/data/t6/t7
$ mkdir /mnt/data/t5
$ mkdir /mnt/data/t7
$ mkdir /mnt/data/n4/t2
$ mkdir /mnt/data/t4
$ mkdir /mnt/data/t3
$ mv /mnt/data/t7 /mnt/data/n4/t2
$ mv /mnt/data/t4 /mnt/data/n4/t2/t7
$ mv /mnt/data/t5 /mnt/data/n4/t2/t7/t4
$ mv /mnt/data/t6 /mnt/data/n4/t2/t7/t4/t5
$ mv /mnt/data/n1/n2 /mnt/data/n4/t2/t7/t4/t5/t6
$ mv /mnt/data/n1 /mnt/data/n4/t2/t7/t4/t5/t6
$ mv /mnt/data/n4/t2/t7/t4/t5/t6/t7 /mnt/data/n4/t2/t7/t4/t5/t6/n2
$ mv /mnt/data/t3 /mnt/data/n4/t2/t7/t4/t5/t6/n2/t7
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ mv /mnt/data/n4/t2/t7/t4/t5/t6/n1 /mnt/data/n4
$ mv /mnt/data/n4/t2 /mnt/data/n4/n1
$ mv /mnt/data/n4/n1/t2/t7/t4/t5/t6/n2 /mnt/data/n4/n1/t2
$ mv /mnt/data/n4/n1/t2/n2/t7/t3 /mnt/data/n4/n1/t2
$ mv /mnt/data/n4/n1/t2/t7/t4/t5/t6 /mnt/data/n4/n1/t2
$ mv /mnt/data/n4/n1/t2/t7/t4 /mnt/data/n4/n1/t2/t6
$ mv /mnt/data/n4/n1/t2/t7 /mnt/data/n4/n1/t2/t3
$ mv /mnt/data/n4/n1/t2/n2/t7 /mnt/data/n4/n1/t2
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs send /mnt/snap1 | btrfs receive /mnt2
$ btrfs send -p /mnt/snap1 /mnt/snap2 | btrfs receive /mnt2
ERROR: send ioctl failed with -12: Cannot allocate memory
Where the parent snapshot directory hierarchy is the following:
. (ino 256)
|-- data/ (ino 257)
|-- n4/ (ino 260)
|-- t2/ (ino 265)
|-- t7/ (ino 264)
|-- t4/ (ino 266)
|-- t5/ (ino 263)
|-- t6/ (ino 261)
|-- n1/ (ino 258)
|-- n2/ (ino 259)
|-- t7/ (ino 262)
|-- t3/ (ino 267)
And the send snapshot's directory hierarchy is the following:
. (ino 256)
|-- data/ (ino 257)
|-- n4/ (ino 260)
|-- n1/ (ino 258)
|-- t2/ (ino 265)
|-- n2/ (ino 259)
|-- t3/ (ino 267)
| |-- t7 (ino 264)
|
|-- t6/ (ino 261)
| |-- t4/ (ino 266)
| |-- t5/ (ino 263)
|
|-- t7/ (ino 262)
While processing inode 262 we orphanize inode 264 and later attempt
to rename inode 264 to its new name/location, which resulted in building
an incorrect destination path string for the rename operation with the
value "data/n4/t2/t7/t4/t5/t6/n2/t7/t3/t7". This rename operation must
have been done only after inode 267 is processed and renamed, as the
ancestor-descendent relationship between inodes 264 and 267 was reversed
between both snapshots, because otherwise it results in an infinite loop
when building the path string for inode 264 when we are processing an
inode with a number larger than 264. That loop is the following:
start inode 264, send progress of 265 for example
parent of 264 -> 267
parent of 267 -> 262
parent of 262 -> 259
parent of 259 -> 261
parent of 261 -> 263
parent of 263 -> 266
parent of 266 -> 264
|--> back to first iteration while current path string length
is <= PATH_MAX, and fail with -ENOMEM otherwise
So fix this by making the check if we need to delay a directory rename
regardless of the current inode having been orphanized or not.
A test case for fstests follows soon.
Thanks to Robbie Ko for providing a reproducer for this problem.
Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Even though we delay the rename of directories when they become
descendents of other directories that were also renamed in the send
root to prevent infinite path build loops, we were doing it in cases
where this was not needed and was actually harmful resulting in
infinite path build loops as we ended up with a circular dependency
of delayed directory renames.
Consider the following reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt2
$ mkdir /mnt/data
$ mkdir /mnt/data/n1
$ mkdir /mnt/data/n1/n2
$ mkdir /mnt/data/n4
$ mkdir /mnt/data/n1/n2/p1
$ mkdir /mnt/data/n1/n2/p1/p2
$ mkdir /mnt/data/t6
$ mkdir /mnt/data/t7
$ mkdir -p /mnt/data/t5/t7
$ mkdir /mnt/data/t2
$ mkdir /mnt/data/t4
$ mkdir -p /mnt/data/t1/t3
$ mkdir /mnt/data/p1
$ mv /mnt/data/t1 /mnt/data/p1
$ mkdir -p /mnt/data/p1/p2
$ mv /mnt/data/t4 /mnt/data/p1/p2/t1
$ mv /mnt/data/t5 /mnt/data/n4/t5
$ mv /mnt/data/n1/n2/p1/p2 /mnt/data/n4/t5/p2
$ mv /mnt/data/t7 /mnt/data/n4/t5/p2/t7
$ mv /mnt/data/t2 /mnt/data/n4/t1
$ mv /mnt/data/p1 /mnt/data/n4/t5/p2/p1
$ mv /mnt/data/n1/n2 /mnt/data/n4/t5/p2/p1/p2/n2
$ mv /mnt/data/n4/t5/p2/p1/p2/t1 /mnt/data/n4/t5/p2/p1/p2/n2/t1
$ mv /mnt/data/n4/t5/t7 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t7
$ mv /mnt/data/n4/t5/p2/p1/t1/t3 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t3
$ mv /mnt/data/n4/t5/p2/p1/p2/n2/p1 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t7/p1
$ mv /mnt/data/t6 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t3/t5
$ mv /mnt/data/n4/t5/p2/p1/t1 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t3/t1
$ mv /mnt/data/n1 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t7/p1/n1
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ mv /mnt/data/n4/t1 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t7/p1/t1
$ mv /mnt/data/n4/t5/p2/p1/p2/n2/t1 /mnt/data/n4/
$ mv /mnt/data/n4/t5/p2/p1/p2/n2 /mnt/data/n4/t1/n2
$ mv /mnt/data/n4/t1/t7/p1 /mnt/data/n4/t1/n2/p1
$ mv /mnt/data/n4/t1/t3/t1 /mnt/data/n4/t1/n2/t1
$ mv /mnt/data/n4/t1/t3 /mnt/data/n4/t1/n2/t1/t3
$ mv /mnt/data/n4/t5/p2/p1/p2 /mnt/data/n4/t1/n2/p1/p2
$ mv /mnt/data/n4/t1/t7 /mnt/data/n4/t1/n2/p1/t7
$ mv /mnt/data/n4/t5/p2/p1 /mnt/data/n4/t1/n2/p1/p2/p1
$ mv /mnt/data/n4/t1/n2/t1/t3/t5 /mnt/data/n4/t1/n2/p1/p2/t5
$ mv /mnt/data/n4/t5 /mnt/data/n4/t1/n2/p1/p2/p1/t5
$ mv /mnt/data/n4/t1/n2/p1/p2/p1/t5/p2 /mnt/data/n4/t1/n2/p1/p2/p1/p2
$ mv /mnt/data/n4/t1/n2/p1/p2/p1/p2/t7 /mnt/data/n4/t1/t7
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs send /mnt/snap1 | btrfs receive /mnt2
$ btrfs send -p /mnt/snap1 /mnt/snap2 | btrfs receive -vv /mnt2
ERROR: send ioctl failed with -12: Cannot allocate memory
This reproducer resulted in an infinite path build loop when building the
path for inode 266 because the following circular dependency of delayed
directory renames was created:
ino 272 <- ino 261 <- ino 259 <- ino 268 <- ino 267 <- ino 261
Where the notation "X <- Y" means the rename of inode X is delayed by the
rename of inode Y (X will be renamed after Y is renamed). This resulted
in an infinite path build loop of inode 266 because that inode has inode
261 as an ancestor in the send root and inode 261 is in the circular
dependency of delayed renames listed above.
Fix this by not delaying the rename of a directory inode if an ancestor of
the inode in the send root, which has a delayed rename operation, is not
also a descendent of the inode in the parent root.
Thanks to Robbie Ko for sending the reproducer example.
A test case for xfstests follows soon.
Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Now, we add all the candidates for trim commands and then finally issue
discard commands.
So, we should count the trimmed size in back-end.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We used to read file_handle twice. Once to get the amount of extra
bytes, and once to fetch the entire structure.
This may be problematic since we do size verifications only after the
first read, so if the number of extra bytes changes in userspace between
the first and second calls, we'll have an incoherent view of
file_handle.
Instead, read the constant size once, and copy that over to the final
structure without having to re-read it again.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FALLOC_FL_INSERT_RANGE flag for ->fallocate was introduced in commit
dd46c78778 ("fs: Add support FALLOC_FL_INSERT_RANGE for fallocate").
The effect of FALLOC_FL_INSERT_RANGE command is the opposite of
FALLOC_FL_COLLAPSE_RANGE, if this command was performed, all data from
offset to EOF in our file will be shifted to right as given length, and
then range [offset, offset + length] becomes a hole.
This command is useful for our user who wants to add some data in the
middle of the file, for example: video/music editor will insert a keyframe
in specified position of media file, with this command we can easily create
a hole for inserting without removing original data.
This patch introduces f2fs_insert_range() to support FALLOC_FL_INSERT_RANGE.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch clean up codes through:
1.rename f2fs_replace_block to __f2fs_replace_block().
2.introduce new f2fs_replace_block() to include __f2fs_replace_block()
and some common related codes around __f2fs_replace_block().
Then, newly introduced function f2fs_replace_block can be used by
following patch.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch makes the quota subsystem only report once that a
particular user/group has exceeded their allotted quota.
Previously, it was possible for a program to continuously try
exceeding quota (despite receiving EDQUOT) and in turn trigger
gfs2 to issue a kernel log message about quota exceed. In theory,
this could get out of hand and flood the log and the filesystem
hosting the log files.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
For smaller block sizes (512B, 1K, 2K), some quotas straddle block
boundaries such that the usage value is on one block and the rest
of the quota is on the previous block. In such cases, the value
does not get updated correctly. This patch fixes that by addressing
the boundary conditions correctly.
This patch also adds a (s64) cast that was missing in a call to
gfs2_quota_change() in inode.c
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Merge hickup on my part, due to a clash between the writeback
changes and the EOPNOTSUPP removal in _submit_bh().
Signed-off-by: Jens Axboe <axboe@fb.com>
For the purpose of foreign inode detection, wb's (bdi_writeback's) are
identified by the associated memcg ID. As we create a separate wb for
each memcg, this is enough to identify the active wb's; however, when
blkcg is enabled or disabled higher up in the hierarchy, the mapping
between memcg and blkcg changes which in turn creates a new wb to
service the new mapping. The old wb is unlinked from index and
released after all references are drained. The foreign inode
detection logic can't detect this condition because both the old and
new wb's point to the same memcg and thus never decides to move inodes
attached to the old wb to the new one.
This patch adds logic to initiate switching immediately in
wbc_attach_and_unlock_inode() if the associated wb is dying. We can
make the usual foreign detection logic to distinguish the different
wb's mapped to the memcg but the dying wb is never gonna be in active
service again and there's no point in tracking the usage history and
reaching the switch verdict after enough data points are collected.
It's already known that the wb has to be switched.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
As concurrent write sharing of an inode is expected to be very rare
and memcg only tracks page ownership on first-use basis severely
confining the usefulness of such sharing, cgroup writeback tracks
ownership per-inode. While the support for concurrent write sharing
of an inode is deemed unnecessary, an inode being written to by
different cgroups at different points in time is a lot more common,
and, more importantly, charging only by first-use can too readily lead
to grossly incorrect behaviors (single foreign page can lead to
gigabytes of writeback to be incorrectly attributed).
To resolve this issue, cgroup writeback detects the majority dirtier
of an inode and transfers the ownership to it. The previous patches
implemented the foreign condition detection mechanism and laid the
groundwork. This patch implements the actual switching.
With the previously implemented [unlocked_]inode_to_wb_and_list_lock()
and wb stat transaction, grabbing wb->list_lock, inode->i_lock and
mapping->tree_lock gives us full exclusion against all wb operations
on the target inode. inode_switch_wb_work_fn() grabs all the locks
and transfers the inode atomically along with its RECLAIMABLE and
WRITEBACK stats.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
With the previous three patches, all operations which acquire wb from
inode are either under one of inode->i_lock, mapping->tree_lock or
wb->list_lock or protected by unlocked_inode_to_wb transaction. This
will be depended upon by foreign inode wb switching.
This patch adds lockdep assertion to inode_to_wb() so that usages
outside the above list locks can be caught easily. There are three
exceptions.
* locked_inode_to_wb_and_lock_list() is holding wb->list_lock but the
wb may not be the inode's. Ensuring that is the function's role
after all. Updated to deref inode->i_wb directly.
* inode_wb_stat_unlocked_begin() is usually protected by combination
of !I_WB_SWITCH and rcu_read_lock(). Updated to deref inode->i_wb
directly.
* inode_congested() wants to test whether inode->i_wb is set before
starting the transaction. Added inode_to_wb_is_valid() which tests
inode->i_wb directly.
v5: might_lock() removed. It annotates that the lock is grabbed w/
irq enabled which isn't the case and triggering lockdep warning
spuriously.
v4: might_lock() added to unlocked_inode_to_wb_begin().
v3: inode_congested() conversion added.
v2: locked_inode_to_wb_and_lock_list() was missing in the first
version.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Similar to wb stat updates, inode_congested() accesses the associated
wb of an inode locklessly, which will break with foreign inode wb
switching. This path updates inode_congested() to use unlocked inode
wb access transaction introduced by the previous patch.
Combined with the previous two patches, this makes all wb list and
access operations to be protected by either of inode->i_lock,
wb->list_lock, or mapping->tree_lock while wb switching is in
progress.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The mechanism for detecting whether an inode should switch its wb
(bdi_writeback) association is now in place. This patch build the
framework for the actual switching.
This patch adds a new inode flag I_WB_SWITCHING, which has two
functions. First, the easy one, it ensures that there's only one
switching in progress for a give inode. Second, it's used as a
mechanism to synchronize wb stat updates.
The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters
but track the current number of dirty pages and pages under writeback
respectively. As such, when an inode is moved from one wb to another,
the inode's portion of those stats have to be transferred together;
unfortunately, this is a bit tricky as those stat updates are percpu
operations which are performed without holding any lock in some
places.
This patch solves the problem in a similar way as memcg. Each such
lockless stat updates are wrapped in transaction surrounded by
unlocked_inode_to_wb_begin/end(). During normal operation, they map
to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted,
mapping->tree_lock is grabbed across the transaction.
In turn, the switching path sets I_WB_SWITCHING and waits for a RCU
grace period to pass before actually starting to switch, which
guarantees that all stat update paths are synchronizing against
mapping->tree_lock.
This patch still doesn't implement the actual switching.
v3: Updated on top of the recent cancel_dirty_page() updates.
unlocked_inode_to_wb_begin() now nests inside
mem_cgroup_begin_page_stat() to match the locking order.
v2: The i_wb access transaction will be used for !stat accesses too.
Function names and comments updated accordingly.
s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/
s/switch_wb/switch_wbs/
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
cgroup writeback currently assumes that inode to wb association
doesn't change; however, with the planned foreign inode wb switching
mechanism, the association will change dynamically.
When an inode needs to be put on one of the IO lists of its wb, the
current code simply calls inode_to_wb() and locks the returned wb;
however, with the planned wb switching, the association may change
before locking the wb and may even get released.
This patch implements [locked_]inode_to_wb_and_lock_list() which pins
the associated wb while holding i_lock, releases it, acquires
wb->list_lock and verifies that the association hasn't changed
inbetween. As the association will be protected by both locks among
other things, this guarantees that the wb is the inode's associated wb
until the list_lock is released.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
As concurrent write sharing of an inode is expected to be very rare
and memcg only tracks page ownership on first-use basis severely
confining the usefulness of such sharing, cgroup writeback tracks
ownership per-inode. While the support for concurrent write sharing
of an inode is deemed unnecessary, an inode being written to by
different cgroups at different points in time is a lot more common,
and, more importantly, charging only by first-use can too readily lead
to grossly incorrect behaviors (single foreign page can lead to
gigabytes of writeback to be incorrectly attributed).
To resolve this issue, cgroup writeback detects the majority dirtier
of an inode and will transfer the ownership to it. To avoid
unnnecessary oscillation, the detection mechanism keeps track of
history and gives out the switch verdict only if the foreign usage
pattern is stable over a certain amount of time and/or writeback
attempts.
The detection mechanism has fairly low space and computation overhead.
It adds 8 bytes to struct inode (one int and two u16's) and minimal
amount of calculation per IO. The detection mechanism converges to
the correct answer usually in several seconds of IO time when there's
a clear majority dirtier. Even when there isn't, it can reach an
acceptable answer fairly quickly under most circumstances.
Please see wb_detach_inode() for more details.
This patch only implements detection. Following patches will
implement actual switching.
v2: wbc_account_io() now checks whether the wbc is associated with a
wb before dereferencing it. This can happen when pageout() is
writing pages directly without going through the usual writeback
path. As pageout() path is single-threaded, we don't want it to
be blocked behind a slow cgroup and ultimately want it to delegate
actual writing to the usual writeback path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, for cgroup writeback, the IO submission paths directly
associate the bio's with the blkcg from inode_to_wb_blkcg_css();
however, it'd be necessary to keep more writeback context to implement
foreign inode writeback detection. wbc (writeback_control) is the
natural fit for the extra context - it persists throughout the
writeback of each inode and is passed all the way down to IO
submission paths.
This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and
wbc_attach_fdatawrite_inode() which are used to associate wbc with the
inode being written back. IO submission paths now use wbc_init_bio()
instead of directly associating bio's with blkcg themselves. This
leaves inode_to_wb_blkcg_css() w/o any user. The function is removed.
wbc currently only tracks the associated wb (bdi_writeback). Future
patches will add more for foreign inode detection. The association is
established under i_lock which will be depended upon when migrating
foreign inodes to other wb's.
As currently, once established, inode to wb association never changes,
going through wbc when initializing bio's doesn't cause any behavior
changes.
v2: submit_blk_blkcg() now checks whether the wbc is associated with a
wb before dereferencing it. This can happen when pageout() is
writing pages directly without going through the usual writeback
path. As pageout() path is single-threaded, we don't want it to
be blocked behind a slow cgroup and ultimately want it to delegate
actual writing to the usual writeback path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, majority of cgroup writeback support including all the
above functions are implemented in include/linux/backing-dev.h and
mm/backing-dev.c; however, the portion closely related to writeback
logic implemented in include/linux/writeback.h and mm/page-writeback.c
will expand to support foreign writeback detection and correction.
This patch moves wb[_try]_get() and wb_put() to
include/linux/backing-dev-defs.h so that they can be used from
writeback.h and inode_{attach|detach}_wb() to writeback.h and
page-writeback.c.
This is pure reorganization and doesn't introduce any functional
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
and rename it to wb_over_bg_thresh(). The function is closely tied to
the dirty throttling mechanism implemented in page-writeback.c. This
relocation will allow future updates necessary for cgroup writeback
support.
While at it, add function comment.
This is pure reorganization and doesn't introduce any behavioral
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch is a part of the series to define wb_domain which
represents a domain that wb's (bdi_writeback's) belong to and are
measured against each other in. This will enable IO backpressure
propagation for cgroup writeback.
global_dirty_limit exists to regulate the global dirty threshold which
is a property of the wb_domain. This patch moves hard_dirty_limit,
dirty_lock, and update_time into wb_domain.
This is pure reorganization and doesn't introduce any behavioral
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
__wb_update_bandwidth() is called from two places -
fs/fs-writeback.c::balance_dirty_pages() and
mm/page-writeback.c::wb_writeback(). The latter updates only the
write bandwidth while the former also deals with the dirty ratelimit.
The two callsites are distinguished by whether @thresh parameter is
zero or not, which is cryptic. In addition, the two files define
their own different versions of wb_update_bandwidth() on top of
__wb_update_bandwidth(), which is confusing to say the least. This
patch cleans up [__]wb_update_bandwidth() in the following ways.
* __wb_update_bandwidth() now takes explicit @update_ratelimit
parameter to gate dirty ratelimit handling.
* mm/page-writeback.c::wb_update_bandwidth() is flattened into its
caller - balance_dirty_pages().
* fs/fs-writeback.c::wb_update_bandwidth() is moved to
mm/page-writeback.c and __wb_update_bandwidth() is made static.
* While at it, add a lockdep assertion to __wb_update_bandwidth().
Except for the lockdep addition, this is pure reorganization and
doesn't introduce any behavioral changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The function name wb_dirty_limit(), its argument @dirty and the local
variable @wb_dirty are mortally confusing given that the function
calculates per-wb threshold value not dirty pages, especially given
that @dirty and @wb_dirty are used elsewhere for dirty pages.
Let's rename the function to wb_calc_thresh() and wb_dirty to
wb_thresh.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Writeback now supports cgroup writeback and the generic writeback,
buffer, libfs, and mpage helpers that ext2 uses are all updated to
work with cgroup writeback.
This patch enables cgroup writeback for ext2 by adding
FS_CGROUP_WRITEBACK to its ->fs_flags.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-ext4@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
__mpage_writepage() is used to implement mpage_writepages() which in
turn is used for ->writepages() of various filesystems. All writeback
logic is now updated to handle cgroup writeback and the block cgroup
to issue IOs for is encoded in writeback_control and can be retrieved
from the inode; however, __mpage_writepage() currently ignores the
blkcg indicated by the inode and issues all bio's without explicit
blkcg association.
This patch updates __mpage_writepage() so that the issued bio's are
associated with inode_to_writeback_blkcg_css(inode).
v2: Updated for per-inode wb association.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@fb.com>
[__]block_write_full_page() is used to implement ->writepage in
various filesystems. All writeback logic is now updated to handle
cgroup writeback and the block cgroup to issue IOs for is encoded in
writeback_control and can be retrieved from the inode; however,
[__]block_write_full_page() currently ignores the blkcg indicated by
inode and issues all bio's without explicit blkcg association.
This patch adds submit_bh_blkcg() which associates the bio with the
specified blkio cgroup before issuing and uses it in
__block_write_full_page() so that the issued bio's are associated with
inode_to_wb_blkcg_css(inode).
v2: Updated for per-inode wb association.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
__mark_inode_dirty() always dirtied the inode against the root wb
(bdi_writeback). The previous patches added all the infrastructure
necessary to attribute an inode against the wb of the dirtying cgroup.
This patch updates __mark_inode_dirty() so that it uses the wb
associated with the inode instead of unconditionally using the root
one.
Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all
pages will keep being dirtied against the root wb.
v2: Updated for per-inode wb association.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
[try_]writeback_inodes_sb[_nr]() and sync_inodes_sb() currently only
handle dirty inodes on the root wb (bdi_writeback) of the target bdi.
This patch implements bdi_split_work_to_wbs() and use it to make these
functions handle multiple wb's.
bdi_split_work_to_wbs() takes a base wb_writeback_work and create
clones of it and issue them to the wb's of the target bdi. The base
work's nr_pages is distributed using wb_split_bdi_pages() -
ie. according to each wb's write bandwidth's proportion in the bdi.
Cloning a bdi involves memory allocation which may fail. In such
cases, bdi_split_work_to_wbs() issues the base work directly and waits
for its completion before proceeding to the next wb to guarantee
forward progress and correctness under memory pressure.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
try_writeback_inodes_sb_nr() wraps writeback_inodes_sb_nr() so that it
handles s_umount locking and skips if writeback is already in
progress. The in progress test is performed on the root wb
(bdi_writeback) which isn't sufficient for cgroup writeback support.
The test must be done per-wb.
To prepare for the change, this patch factors out
__writeback_inodes_sb_nr() from writeback_inodes_sb_nr() and adds
@skip_if_busy and moves the in progress test right before queueing the
wb_writeback_work. try_writeback_inodes_sb_nr() now just grabs
s_umount and invokes __writeback_inodes_sb_nr() with asserted
@skip_if_busy. This way, later addition of multiple wb handling can
skip only the wb's which already have writeback in progress.
This swaps the order between in progress test and s_umount test which
can flip the return value when writeback is in progress and s_umount
is being held by someone else but this shouldn't cause any meaningful
difference. It's a fringe condition and the return value is an
unsynchronized hint anyway.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
For cgroup writeback, multiple wb_writeback_work items may need to be
issuedto accomplish a single task. The previous patch updated the
waiting mechanism such that wb_wait_for_completion() can wait for
multiple work items.
Issuing mulitple work items involves memory allocation which may fail.
As most writeback operations can't fail or blocked on memory
allocation, in such cases, we'll fall back to sequential issuing of an
on-stack work item, which would need to be waited upon sequentially.
This patch implements wb_wait_for_single_work() which waits for a
single work item independently from wb_completion waiting so that such
fallback mechanism can be used without getting tangled with the usual
issuing / completion operation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
If the completion of a wb_writeback_work can be waited upon by setting
its ->done to a struct completion and waiting on it; however, for
cgroup writeback support, it's necessary to issue multiple work items
to multiple bdi_writebacks and wait for the completion of all.
This patch implements wb_completion which can wait for multiple work
items and replaces the struct completion with it. It can be defined
using DEFINE_WB_COMPLETION_ONSTACK(), used for multiple work items and
waited for by wb_wait_for_completion().
Nobody currently issues multiple work items and this patch doesn't
introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a wb_writeback_work is freed automatically on completion if
it doesn't have ->done set. Add wb_writeback_work->auto_free to make
the switch explicit. This will help cgroup writeback support where
waiting for completion and whether to free automatically don't
necessarily move together.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
wakeup_dirtytime_writeback() currently only starts writeback on the
root wb (bdi_writeback). For cgroup writeback support, update the
function to check all wbs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jens Axboe <axboe@fb.com>
wakeup_flusher_threads() currently only starts writeback on the root
wb (bdi_writeback). For cgroup writeback support, update the function
to wake up all wbs and distribute the number of pages to write
according to the proportion of each wb's write bandwidth, which is
implemented in wb_split_bdi_pages().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
bdi_start_background_writeback() currently takes @bdi and kicks the
root wb (bdi_writeback). In preparation for cgroup writeback support,
make it take wb instead.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
writeback_in_progress() currently takes @bdi and returns whether
writeback is in progress on its root wb (bdi_writeback). In
preparation for cgroup writeback support, make it take wb instead.
While at it, make it an inline function.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
bdi_start_writeback() is a thin wrapper on top of
__wb_start_writeback() which is used only by laptop_mode_timer_fn().
This patches removes bdi_start_writeback(), renames
__wb_start_writeback() to wb_start_writeback() and makes
laptop_mode_timer_fn() use it instead.
This doesn't cause any functional difference and will ease making
laptop_mode_timer_fn() cgroup writeback aware.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
There are several places in fs/fs-writeback.c which queues
wb_writeback_work without checking whether the target wb
(bdi_writeback) has dirty inodes or not. The only thing
wb_writeback_work does is writing back the dirty inodes for the target
wb and queueing a work item for a clean wb is essentially noop. There
are some side effects such as bandwidth stats being updated and
triggering tracepoints but these don't affect the operation in any
meaningful way.
This patch makes all writeback_inodes_sb_nr() and sync_inodes_sb()
skip wb_queue_work() if the target bdi is clean. Also, it moves
dirtiness check from wakeup_flusher_threads() to
__wb_start_writeback() so that all its callers benefit from the check.
While the overhead incurred by scheduling a noop work isn't currently
significant, the overhead may be higher with cgroup writeback support
as we may end up issuing noop work items to a lot of clean wb's.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
bdi_has_dirty_io() used to only reflect whether the root wb
(bdi_writeback) has dirty inodes. For cgroup writeback support, it
needs to take all active wb's into account. If any wb on the bdi has
dirty inodes, bdi_has_dirty_io() should return true.
To achieve that, as inode_wb_list_{move|del}_locked() now keep track
of the dirty state transition of each wb, the number of dirty wbs can
be counted in the bdi; however, bdi is already aggregating
wb->avg_write_bandwidth which can easily be guaranteed to be > 0 when
there are any dirty inodes by ensuring wb->avg_write_bandwidth can't
dip below 1. bdi_has_dirty_io() can simply test whether
bdi->tot_write_bandwidth is zero or not.
While this bumps the value of wb->avg_write_bandwidth to one when it
used to be zero, this shouldn't cause any meaningful behavior
difference.
bdi_has_dirty_io() is made an inline function which tests whether
->tot_write_bandwidth is non-zero. Also, WARN_ON_ONCE()'s on its
value are added to inode_wb_list_{move|del}_locked().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
cgroup writeback support needs to keep track of the sum of
avg_write_bandwidth of all wb's (bdi_writeback's) with dirty inodes to
distribute write workload. This patch adds bdi->tot_write_bandwidth
and updates inode_wb_list_move_locked(), inode_wb_list_del_locked()
and wb_update_write_bandwidth() to adjust it as wb's gain and lose
dirty inodes and its avg_write_bandwidth gets updated.
As the update events are not synchronized with each other,
bdi->tot_write_bandwidth is an atomic_long_t.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, wb_has_dirty_io() determines whether a wb (bdi_writeback)
has any dirty inode by testing all three IO lists on each invocation
without actively keeping track. For cgroup writeback support, a
single bdi will host multiple wb's each of which will host dirty
inodes separately and we'll need to make bdi_has_dirty_io(), which
currently only represents the root wb, aggregate has_dirty_io from all
member wb's, which requires tracking transitions in has_dirty_io state
on each wb.
This patch introduces inode_wb_list_{move|del}_locked() to consolidate
IO list operations leaving queue_io() the only other function which
directly manipulates IO lists (via move_expired_inodes()). All three
functions are updated to call wb_io_lists_[de]populated() which keep
track of whether the wb has dirty inodes or not and record it using
the new WB_has_dirty_io flag. inode_wb_list_moved_locked()'s return
value indicates whether the wb had no dirty inodes before.
mark_inode_dirty() is restructured so that the return value of
inode_wb_list_move_locked() can be used for deciding whether to wake
up the wb.
While at it, change {bdi|wb}_has_dirty_io()'s return values to bool.
These functions were returning 0 and 1 before. Also, add a comment
explaining the synchronization of wb_state flags.
v2: Updated to accommodate b_dirty_time.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
In several places, bdi_congested() and its wrappers are used to
determine whether more IOs should be issued. With cgroup writeback
support, this question can't be answered solely based on the bdi
(backing_dev_info). It's dependent on whether the filesystem and bdi
support cgroup writeback and the blkcg the inode is associated with.
This patch implements inode_congested() and its wrappers which take
@inode and determines the congestion state considering cgroup
writeback. The new functions replace bdi_*congested() calls in places
where the query is about specific inode and task.
There are several filesystem users which also fit this criteria but
they should be updated when each filesystem implements cgroup
writeback support.
v2: Now that a given inode is associated with only one wb, congestion
state can be determined independent from the asking task. Drop
@task. Spotted by Vivek. Also, converted to take @inode instead
of @mapping and renamed to inode_congested().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
For the planned cgroup writeback support, on each bdi
(backing_dev_info), each memcg will be served by a separate wb
(bdi_writeback). This patch updates bdi so that a bdi can host
multiple wbs (bdi_writebacks).
On the default hierarchy, blkcg implicitly enables memcg. This allows
using memcg's page ownership for attributing writeback IOs, and every
memcg - blkcg combination can be served by its own wb by assigning a
dedicated wb to each memcg. This means that there may be multiple
wb's of a bdi mapped to the same blkcg. As congested state is per
blkcg - bdi combination, those wb's should share the same congested
state. This is achieved by tracking congested state via
bdi_writeback_congested structs which are keyed by blkcg.
bdi->wb remains unchanged and will keep serving the root cgroup.
cgwb's (cgroup wb's) for non-root cgroups are created on-demand or
looked up while dirtying an inode according to the memcg of the page
being dirtied or current task. Each cgwb is indexed on bdi->cgwb_tree
by its memcg id. Once an inode is associated with its wb, it can be
retrieved using inode_to_wb().
Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all
pages will keep being associated with bdi->wb.
v3: inode_attach_wb() in account_page_dirtied() moved inside
mapping_cap_account_dirty() block where it's known to be !NULL.
Also, an unnecessary NULL check before kfree() removed. Both
detected by the kbuild bot.
v2: Updated so that wb association is per inode and wb is per memcg
rather than blkcg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that bdi definitions are moved to backing-dev-defs.h,
backing-dev.h can include blkdev.h and inline inode_to_bdi() without
worrying about introducing circular include dependency. The function
gets called from hot paths and fairly trivial.
This patch makes inode_to_bdi() and sb_is_blkdev_sb() that the
function calls inline. blockdev_superblock and noop_backing_dev_info
are EXPORT_GPL'd to allow the inline functions to be used from
modules.
While at it, make sb_is_blkdev_sb() return bool instead of int.
v2: Fixed typo in description as suggested by Jan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.
This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it. c files
which need access to more backing-dev details now include
backing-dev.h directly. This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.
v2: fs/fat build failure fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bdi->wb_lock and ->worklist into wb.
* The lock protects bdi->worklist and bdi->wb.dwork scheduling. While
moving, rename it to wb->work_lock as wb->wb_lock is confusing.
Also, move wb->dwork downwards so that it's colocated with the new
->work_lock and ->work_list fields.
* bdi_writeback_workfn() -> wb_workfn()
bdi_wakeup_thread_delayed(bdi) -> wb_wakeup_delayed(wb)
bdi_wakeup_thread(bdi) -> wb_wakeup(wb)
bdi_queue_work(bdi, ...) -> wb_queue_work(wb, ...)
__bdi_start_writeback(bdi, ...) -> __wb_start_writeback(wb, ...)
get_next_work_item(bdi) -> get_next_work_item(wb)
* bdi_wb_shutdown() is renamed to wb_shutdown() and now takes @wb.
The function contained parts which belong to the containing bdi
rather than the wb itself - testing cap_writeback_dirty and
bdi_remove_from_list() invocation. Those are moved to
bdi_unregister().
* bdi_wb_{init|exit}() are renamed to wb_{init|exit}().
Initializations of the moved bdi->wb_lock and ->work_list are
relocated from bdi_init() to wb_init().
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->state are mechanically replaced with bdi->wb.state
introducing no behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bandwidth related fields from backing_dev_info into
bdi_writeback.
* The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp,
write_bandwidth, avg_write_bandwidth, dirty_ratelimit,
balanced_dirty_ratelimit, completions and dirty_exceeded.
* writeback_chunk_size() and over_bground_thresh() now take @wb
instead of @bdi.
* bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...)
bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...)
bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...)
bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...)
[__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...)
bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...)
bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...)
* Init/exits of the relocated fields are moved to bdi_wb_init/exit()
respectively. Note that explicit zeroing is dropped in the process
as wb's are cleared in entirety anyway.
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
introducing no behavior changes.
v2: Typo in description fixed as suggested by Jan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bdi->bdi_stat[] into wb.
* enum bdi_stat_item is renamed to wb_stat_item and the prefix of all
enums is changed from BDI_ to WB_.
* BDI_STAT_BATCH() -> WB_STAT_BATCH()
* [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...)
* bdi_stat[_error]() -> wb_stat[_error]()
* bdi_writeout_inc() -> wb_writeout_inc()
* stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and
frees stat.
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
introducing no behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bdi->state into wb.
* enum bdi_state is renamed to wb_state and the prefix of all enums is
changed from BDI_ to WB_.
* Explicit zeroing of bdi->state is removed without adding zeoring of
wb->state as the whole data structure is zeroed on init anyway.
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->state are mechanically replaced with bdi->wb.state
introducing no behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: drbd-dev@lists.linbit.com
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When modifying PG_Dirty on cached file pages, update the new
MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where
global NR_FILE_DIRTY is managed. The new memcg stat is visible in the
per memcg memory.stat cgroupfs file. The most recent past attempt at
this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632
The new accounting supports future efforts to add per cgroup dirty
page throttling and writeback. It also helps an administrator break
down a container's memory usage and provides evidence to understand
memcg oom kills (the new dirty count is included in memcg oom kill
messages).
The ability to move page accounting between memcg
(memory.move_charge_at_immigrate) makes this accounting more
complicated than the global counter. The existing
mem_cgroup_{begin,end}_page_stat() lock is used to serialize move
accounting with stat updates.
Typical update operation:
memcg = mem_cgroup_begin_page_stat(page)
if (TestSetPageDirty()) {
[...]
mem_cgroup_update_page_stat(memcg)
}
mem_cgroup_end_page_stat(memcg)
Summary of mem_cgroup_end_page_stat() overhead:
- Without CONFIG_MEMCG it's a no-op
- With CONFIG_MEMCG and no inter memcg task movement, it's just
rcu_read_lock()
- With CONFIG_MEMCG and inter memcg task movement, it's
rcu_read_lock() + spin_lock_irqsave()
A memcg parameter is added to several routines because their callers
now grab mem_cgroup_begin_page_stat() which returns the memcg later
needed by for mem_cgroup_update_page_stat().
Because mem_cgroup_begin_page_stat() may disable interrupts, some
adjustments are needed:
- move __mark_inode_dirty() from __set_page_dirty() to its caller.
__mark_inode_dirty() locking does not want interrupts disabled.
- use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in
__delete_from_page_cache(), replace_page_cache_page(),
invalidate_complete_page2(), and __remove_mapping().
text data bss dec hex filename
8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before
8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after
+192 text bytes
8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before
8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after
+773 text bytes
Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for
all metrics, they're all wall clock or cycle counts. The read and write
fault benchmarks just measure fault time, they do not include I/O time.
* CONFIG_MEMCG not set:
baseline patched
kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples)
dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03%
dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99%
dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77%
read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples)
write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples)
* CONFIG_MEMCG=y root_memcg:
baseline patched
kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples)
dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90%
dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33%
dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00%
read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples)
write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples)
* CONFIG_MEMCG=y non-root_memcg:
baseline patched
kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples)
dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82%
dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27%
dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52%
read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples)
write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples)
As expected anon page faults are not affected by this patch.
tj: Updated to apply on top of the recent cancel_dirty_page() changes.
Signed-off-by: Sha Zhengju <handai.szj@gmail.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
cancel_dirty_page() had some issues and b9ea25152e ("page_writeback:
clean up mess around cancel_dirty_page()") replaced it with
account_page_cleaned() which makes the caller responsible for clearing
the dirty bit; unfortunately, the planned changes for cgroup writeback
support requires synchronization between dirty bit manipulation and
stat updates. While we can open-code such synchronization in each
account_page_cleaned() callsite, that's gonna be unnecessarily awkward
and verbose.
This patch revives cancel_dirty_page() but in a more restricted form.
All it does is TestClearPageDirty() followed by account_page_cleaned()
invocation if the page was dirty. This helper covers all
account_page_cleaned() usages except for __delete_from_page_cache()
which is a special case anyway and left alone. As this leaves no
module user for account_page_cleaned(), EXPORT_SYMBOL() is dropped
from it.
This patch just revives cancel_dirty_page() as a trivial wrapper to
replace equivalent usages and doesn't introduce any functional
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@fb.com>
Delete jump to a label on the next line, when that label is not
used elsewhere.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r@
identifier l;
@@
-if (...) goto l;
-l:
// </smpl>
Also drop the unnecessary ret variable.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When encoding the NFSACL SETACL operation, reserve just the estimated
size of the ACL rather than a fixed maximum. This eliminates needless
zero padding on the wire that the server ignores.
Fixes: ee5dc7732b ('NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In glibc 2.21 (and several previous), a call to opendir() will
result in a 32K (BUFSIZ*4) buffer being allocated and passed to
getdents.
However a call to fdopendir() results in an 'fstat' request to
determine block size and a matching buffer allocated for subsequent
use with getdents. This will typically be 1M.
The first getdents call on an NFS directory will always use
READDIR_PLUS (or NFSv4 equivalent) if available. Subsequent getdents
calls only use this more expensive version if some 'stat' requests are
made between the getdents calls.
For this reason it is good to keep at least that first getdents call
relatively short. When fdopendir() and readdir() is used on a large
directory, it takes approximately 32 times as long to complete as
using "opendir". Current versions of 'find' use fdopendir() and
demonstrate this slowness.
'stat' on a directory currently returns the 'wsize'. This number has
no meaning on directories.
Actual READDIR requests are limited to ->dtsize, which itself is
capped at 4 pages, coincidently the same as BUFSIZ*4.
So this is a meaningful number to use as the blocksize on directories,
and has the effect of making 'find' on large directories go a lot
faster.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
While the NFSv4.1 code has always drained the slot tables in order to stop
non-recovery related RPC calls when doing lease recovery, the NFSv4 code
did not.
The reason for the difference in behaviour is that NFSv4 does not have
session state, and so RPC calls can in theory proceed while recovery is
happening. In practice, however, anything I/O or state related needs to
wait until recovery is over.
This patch changes the behaviour of NFSv4 to match that of NFSv4.1 so that
we can simplify the state recovery code by assuming that we do not have to
deal with races between recovery and ordinary I/O.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
register_shrinker() in ubifs_init() can fail due to fail to call kzalloc.
This patch fixes to check the return value of register_shrinker, otherwise
our shrinker may be unregistered after ubifs initialized successfully.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Conflicts:
drivers/net/phy/amd-xgbe-phy.c
drivers/net/wireless/iwlwifi/Kconfig
include/net/mac80211.h
iwlwifi/Kconfig and mac80211.h were both trivial overlapping
changes.
The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and
the bug fix that happened on the 'net' side is already integrated
into the rest of the amd-xgbe driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
Current f2fs check the whether the blk device can support discard.
However, the code will cause the discard option cannot be enabled.
Because the clear_opt(sbi, DISCARD) will be invoked forever.
This patch can fix this issue.
Jaegeuk Kim:
The original patch was intended to disable the discard option when device
does not support trim command.
Rather than remaining the buggy patch, let's replace with this patch as
an integrated one.
Signed-off-by: Chenxi Mao <chenxi.mao2013@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We don't need to call alloc_page() prior to mempool_alloc(), since the
mempool_alloc() calls alloc_page() internally.
And, if __GFP_WAIT is set, it never fails on page allocation, so let's
give GFP_NOWAIT and handle ENOMEM by writepage().
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to call f2fs_inherit_context twice for newly created symlink.
The original one is called by f2fs_add_link(), which invokes f2fs_setxattr.
If the second one is called again, f2fs_setxattr is triggered again with same
encryption index.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Encryption policy should only be set to an empty directory through ioctl,
This patch add a judgement condition to verify type of the target inode
to avoid incorrectly configuring for non-directory.
Additionally, remove unneeded inline data conversion since regular or symlink
file should not be processed here.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add XATTR_CREATE flag in setxattr when setting encryption
context for inode. Without this flag the context could be set more than
once, this should never happen. So, fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For exchange rename, we should check context consistent of encryption
between new_dir and old_inode or old_dir and new_inode. Otherwise
inheritance of parent's encryption context will be broken.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: sync with ext4 approach]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to clean up code because part code of f2fs_read_end_io
and mpage_end_io are the same, so it's better to merge and reuse them.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch applies the following ext4 patch:
ext4 crypto: use per-inode tfm structure
As suggested by Herbert Xu, we shouldn't allocate a new tfm each time
we read or write a page. Instead we can use a single tfm hanging off
the inode's crypt_info structure for all of our encryption needs for
that inode, since the tfm can be used by multiple crypto requests in
parallel.
Also use cmpxchg() to avoid races that could result in crypt_info
structure getting doubly allocated or doubly freed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch recovers a broken superblock with the other valid one.
Signed-off-by: hujianyang <hujianyang@huawei.com>
[Jaegeuk Kim: reinitialize local variables in f2fs_fill_super for retrial]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As the description of rename in manual, RENAME_WHITEOUT is a special operation
that only makes sense for overlay/union type filesystem.
When performing rename with RENAME_WHITEOUT, dst will be replace with src, and
meanwhile, a 'whiteout' will be create with name of src.
A "whiteout" is designed to be a char device with 0,0 device number, it has
specially meaning for stackable filesystem. In these filesystems, there are
multiple layers exist, and only top of these can be modified. So a whiteout
in top layer is used to hide a corresponding file in lower layer, as well
removal of whiteout will make the file appear.
Now in overlayfs, when we rename a file which is exist in lower layer, it
will be copied up to upper if it is not on upper layer yet, and then rename
it on upper layer, source file will be whiteouted to hide corresponding file
in lower layer at the same time.
So in upper layer filesystem, implementation of RENAME_WHITEOUT provide a
atomic operation for stackable filesystem to support rename operation.
There are multiple ways to implement RENAME_WHITEOUT in log of this commit:
7dcf5c3e45 ("xfs: add RENAME_WHITEOUT support") which pointed out by
Dave Chinner.
For now, we just try to follow the way that xfs/ext4 use.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a help function update_meta_page() to update meta page with specified
buffer.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now page cache of meta inode is used by garbage collection for encrypted page,
it may contain random data, so we should zero it before issuing discard.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch splits f2fs_crypto_init/exit with two parts: base initialization and
memory allocation.
Firstly, f2fs module declares the base encryption memory pointers.
Then, allocating internal memories is done at the first encrypted inode access.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When encryption feature is enable, if we rmmod f2fs module,
we will encounter a stack backtrace reported in syslog:
"BUG: Bad page state in process rmmod pfn:aaf8a
page:f0f4f148 count:0 mapcount:129 mapping:ee2f4104 index:0x80
flags: 0xee2830a4(referenced|lru|slab|private_2|writeback|swapbacked|mlocked)
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags:
flags: 0x2030a0(lru|slab|private_2|writeback|mlocked)
Modules linked in: f2fs(O-) fuse bnep rfcomm bluetooth dm_crypt binfmt_misc snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm
snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device joydev ppdev mac_hid lp hid_generic i2c_piix4
parport_pc psmouse snd serio_raw parport soundcore ext4 jbd2 mbcache usbhid hid e1000 [last unloaded: f2fs]
CPU: 1 PID: 3049 Comm: rmmod Tainted: G B O 4.1.0-rc3+ #10
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
00000000 00000000 c0021eb4 c15b7518 f0f4f148 c0021ed8 c112e0b7 c1779174
c9b75674 000aaf8a 01b13ce1 c17791a4 f0f4f148 ee2830a4 c0021ef8 c112e3c3
00000000 f0f4f148 c0021f34 f0f4f148 ee2830a4 ef9f0000 c0021f20 c112fdf8
Call Trace:
[<c15b7518>] dump_stack+0x41/0x52
[<c112e0b7>] bad_page.part.72+0xa7/0x100
[<c112e3c3>] free_pages_prepare+0x213/0x220
[<c112fdf8>] free_hot_cold_page+0x28/0x120
[<c1073380>] ? try_to_wake_up+0x2b0/0x2b0
[<c112ff15>] __free_pages+0x25/0x30
[<c112c4fd>] mempool_free_pages+0xd/0x10
[<c112c5f1>] mempool_free+0x31/0x90
[<f0f441cf>] f2fs_exit_crypto+0x6f/0xf0 [f2fs]
[<f0f456c4>] exit_f2fs_fs+0x23/0x95f [f2fs]
[<c10c30e0>] SyS_delete_module+0x130/0x180
[<c11556d6>] ? vm_munmap+0x46/0x60
[<c15bd888>] sysenter_do_call+0x12/0x12"
The reason is that:
since commit 0827e645fd35
("f2fs crypto: shrink size of the f2fs_crypto_ctx structure") is merged,
some fields in f2fs_crypto_ctx structure are merged into a union as they
will never be used simultaneously in write path, read path or on free list.
In f2fs_exit_crypto, we traverse each crypto ctx from free list, in this
moment, our free_list field in union is valid, but still we will try to
release memory space which is pointed by other invalid field in union
structure for each ctx.
Then the error occurs, let's fix it with this patch.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes memory leak issue in error path of f2fs_fname_setup_filename().
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch integrates the below patch into f2fs.
"ext4 crypto: shrink size of the ext4_crypto_ctx structure
Some fields are only used when the crypto_ctx is being used on the
read path, some are only used on the write path, and some are only
used when the structure is on free list. Optimize memory use by using
a union."
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch integrates the below patch into f2fs.
"ext4 crypto: get rid of ci_mode from struct ext4_crypt_info
The ci_mode field was superfluous, and getting rid of it gets rid of
an unused hole in the structure."
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch integrates the below patch into f2fs.
"ext4 crypto: use slab caches
Use slab caches the ext4_crypto_ctx and ext4_crypt_info structures for
slighly better memory efficiency and debuggability."
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Hu reported, F2FS has a space leak problem, when conducting:
1) format a 4GB f2fs partition
2) dd a 3G file,
3) unlink it.
So, when doing f2fs_drop_inode(), we need to truncate data blocks
before skipping it.
We can also drop unused caches assigned to each inode.
Reported-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The return was not indented far enough so it looked like it was supposed
to go with the other if statement.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
A bug fix to the debug output extended the type of some local
variables to 64-bit, which now causes the kernel to fail building
because of missing 64-bit division functions:
ERROR: "__aeabi_uldivmod" [fs/f2fs/f2fs.ko] undefined!
In the kernel, we have to use div_u64 or do_div to do this,
in order to annotate that this is an expensive operation.
As the function is only called for debug out, we know this
is not performance critical, so it is safe to use div_u64.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d1f85bd38db19 ("f2fs: avoid value overflow in showing current status")
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
introduce compat_ioctl to regular files, but doesn't add this
functionality to f2fs_dir_operations.
While running a 32-bit busybox, I met an error like this:
(A is a directory)
chattr: reading flags on A: Inappropriate ioctl for device
This patch copies compat_ioctl from f2fs_file_operations and
fix this problem.
Signed-off-by: hujianyang <hujianyang@huawei.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Problem: When an operation like WRITE receives a BAD_STATEID, even though
recovery code clears the RECLAIM_NOGRACE recovery flag before recovering
the open state, because of clearing delegation state for the associated
inode, nfs_inode_find_state_and_recover() gets called and it makes the
same state with RECLAIM_NOGRACE flag again. As a results, when we restart
looking over the open states, we end up in the infinite loop instead of
breaking out in the next test of state flags.
Solution: unset the RECLAIM_NOGRACE set because of
calling of nfs_inode_find_state_and_recover() after returning from calling
recover_open() function.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If count == 0 bytes are requested by a reader, sysfs_kf_bin_read()
deliberately returns 0 without passing a potentially harmful value to
some externally defined underlying battr->read() function.
However in case of (pos == size && count) the next clause always sets
count to 0 and this value is handed over to battr->read().
The change intends to make obsolete (and remove later) a redundant
sanity check in battr->read(), if it is present, or add more
protection to struct bin_attribute users, who does not care about
input arguments.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed two missing spaces.
Signed-off-by: Nan Jia <jiananmail@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull vfs fix from Al Viro:
"Off-by-one in d_walk()/__dentry_kill() race fix.
It's very hard to hit; possible in the same conditions as the original
bug, except that you need the skipped branch to contain all the
remaining evictables, so that the d_walk()-calling loop in
d_invalidate() decides there's nothing more to do and doesn't go for
another pass - otherwise that next pass will sweep the sucker.
So it's not too urgent, but seeing that the fix is obvious and the
original commit has spread into all -stable branches..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
d_walk() might skip too much
The commit:
a9273ca5 xfs: convert attr to use unsigned names
added these (unsigned char *) casts, but then the _SIZE macros
return "7" - size of a pointer minus one - not the length of
the string. This is harmless in the kernel, because the _SIZE
macros are not used, but as we sync up with userspace, this will
matter.
I don't think the cast is necessary; i.e. assigning the string
literal to an unsigned char *, or passing it to a function
expecting an unsigned char *, should be ok, right?
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Al Viro reports that generic/231 fails frequently on XFS and bisected
the problem to the following commit:
5d11fb4b xfs: rework zero range to prevent invalid i_size updates
... which is just the first commit that happens to cause fsx to
reproduce the problem. fsx reproduces via zero range calls. The
aforementioned commit overhauls zero range to use hole punch and
fallocate. As it turns out, the problem is reproducible on demand using
basic hole punch as follows:
$ mkfs.xfs -f -m crc=1,finobt=1 <dev>
$ mount <dev> /mnt -o uquota
$ xfs_io -f -c "falloc 0 50m" /mnt/file
$ for i in $(seq 1 20); do xfs_io -c "fpunch ${i}m 32k" /mnt/file; done
$ rm -f /mnt/file
$ repquota -us /mnt
...
User used soft hard grace used soft hard grace
----------------------------------------------------------------------
root -- 32K 0K 0K 3 0 0
A file is allocated with a single 50m extent. The extent count increases
via hole punches until the bmap converts to btree format. The file is
removed but quota reports 32k of space usage for the user. This
reservation is effectively leaked for the lifetime of the mount.
The reason this occurs is because the quota block reservation tracking
is confused when a transaction happens to free and allocate blocks at
the same time. Consider the following sequence of events:
- tp is allocated from xfs_free_file_space() and reserves several blocks
for btree management. Blocks are reserved against the dquot and marked
as such in the transaction (qtrx->qt_blk_res).
- 8 blocks are accounted free when the 32k range is punched out.
xfs_trans_mod_dquot() is called with XFS_TRANS_DQ_BCOUNT and sets
->qt_bcount_delta to -8.
- Subsequently, a block is allocated against the same transaction by
xfs_bmap_extents_to_btree() for btree conversion. A call to
xfs_trans_mod_dquot() increases qt_blk_res_used to 1 and qt_bcount_delta
to -7.
- The transaction is dup'd and committed by xfs_bmap_finish().
xfs_trans_dup_dqinfo() sets the first transaction up such that it has a
matching qt_blk_res and qt_blk_res_used of 1. The remaining unused
reservation is transferred to the duplicate tp.
When the transactions are committed, the dquots are fixed up in
xfs_trans_apply_dquot_deltas() according to one of two methods:
1.) If the transaction holds a block reservation (->qt_blk_res != 0),
_only_ the unused portion reservation is unaccounted from the dquot.
Note that the tp duplication behavior of xfs_bmap_finish() makes it such
that qt_blk_res is typically 0 for tp's with unused reservation.
2.) Otherwise, the dquot is fixed up based on the block delta
(->qt_bcount_delta) created by the transaction.
Therefore, if a transaction has a negative qt_bcount_delta and positive
qt_blk_res_used, the former set of blocks that have been removed from
the file are never factored out of the in-core dquot reservation.
Instead, *_apply_dquot_deltas() sees 1 block used out of a 1 block
reservation and believes there is nothing to fix up. The on-disk
d_bcount is updated independently from qt_bcount_delta, and thus is
correct (and allows the quota usage to correct on remount).
To deal with this situation, we effectively want the "used reservation"
part of the transaction to be consistent with any freed blocks with
respect to quota tracking. For example, if 8 blocks are freed, the
subsequent single block allocation does not need to consume the initial
reservation made by the tp. Instead, it simply borrows one from the
previously freed. One possible implementation of such borrowing is to
avoid the blks_res_used increment when bcount_delta is negative. This
alone is flawed logic in that it only handles the case where blocks are
freed before allocated, however.
Rather than add more complexity to manage synchronization between
bcount_delta and blks_res_used, kill the latter entirely. blk_res_used
is only updated in one place and always in sync with delta_bcount.
Therefore, the net block reservation consumption of the transaction is
always available from bcount_delta. Calculate the reservation
consumption on the fly where necessary based on whether the tp has a
reservation and results in a positive net block delta on the inode.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The fsync() requirements for crash consistency on XFS are to flush file
data and force any in-core inode updates to the log. We currently check
whether the inode is pinned to identify whether the log needs to be
forced, since a non-zero pin count generally represents an inode that
has transactions awaiting a flush to the on-disk log.
This is not sufficient in all cases, however. Reports of xfstests test
generic/311 failures on ppc64/s390x hosts have identified failures to
fsync outstanding inode modifications due to the inode not being pinned
at the time of the fsync. This occurs because certain bmap updates can
complete by logging bmapbt buffers but without ever dirtying (and thus
pinning) the core inode. The following is a specific incarnation of this
problem:
$ mount $dev /mnt -o noatime,nobarrier
$ for i in $(seq 0 2 31); do \
xfs_io -f -c "falloc $((i * 32768)) 32k" -c fsync /mnt/file; \
done
$ xfs_io -c "pwrite -S 0 80k 16k" -c fsync -c "pwrite 76k 4k" -c fsync /mnt/file; \
hexdump /mnt/file; \
./xfstests-dev/src/godown /mnt
...
0000000 0000 0000 0000 0000 0000 0000 0000 0000
*
0013000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
*
0014000 0000 0000 0000 0000 0000 0000 0000 0000
*
00f8000
$ umount /mnt; mount ...
$ hexdump /mnt/file
0000000 0000 0000 0000 0000 0000 0000 0000 0000
*
00f8000
In short, the unwritten extent conversion for the last write is lost
despite the fact that an fsync executed before the filesystem was
shutdown. Note that this is impossible to reproduce on v5 supers due to
unconditional time callbacks for di_changecount and highly difficult to
reproduce on CONFIG_HZ=1000 kernels due to those same callbacks
frequently updating cmtime prior to the bmap update. CONFIG_HZ=100
reduces timer granularity enough to increase the odds that time updates
are skipped and allows this to reproduce within a handful of attempts.
To deal with this problem, unconditionally log the core in the unwritten
extent conversion path. Fix up logflags after the extent conversion to
keep the extent update code consistent with the other extent update
helpers. This fixup is not necessary for the other (hole, delay) extent
helpers because they execute in the block allocation codepath, which
already logs the inode for other reasons (e.g., for di_nblocks).
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Crypto resource should be released when ext4 module exits, otherwise
it will cause memory leak.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously we were taking the required padding when allocating space
for the on-disk symlink. This caused a buffer overrun which could
trigger a krenel crash when running fsstress.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a potential memory leak where fname->crypto_buf.name wouldn't get
freed in some error paths, and also make the error handling easier to
understand/audit.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out calls to ext4_inherit_context() and move them to
__ext4_new_inode(); this fixes a problem where ext4_tmpfile() wasn't
calling calling ext4_inherit_context(), so the temporary file wasn't
getting protected. Since the blocks for the tmpfile could end up on
disk, they really should be protected if the tmpfile is created within
the context of an encrypted directory.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Set up the encryption information for newly created inodes immediately
after they inherit their encryption context from their parent
directories.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_encrypted_zeroout() could end up leaking a bio and bounce page.
Fortunately it's not used much. While we're fixing things up,
refactor out common code into the static function alloc_bounce_page()
and fix up error handling if mempool_alloc() fails.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As suggested by Herbert Xu, we shouldn't allocate a new tfm each time
we read or write a page. Instead we can use a single tfm hanging off
the inode's crypt_info structure for all of our encryption needs for
that inode, since the tfm can be used by multiple crypto requests in
parallel.
Also use cmpxchg() to avoid races that could result in crypt_info
structure getting doubly allocated or doubly freed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On arm64 this is apparently needed for CTS mode to function correctly.
Otherwise attempts to use CTS return ENOENT.
Change-Id: I732ea9a5157acc76de5b89edec195d0365f4ca63
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some fields are only used when the crypto_ctx is being used on the
read path, some are only used on the write path, and some are only
used when the structure is on free list. Optimize memory use by using
a union.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
hppfs (honeypot procfs) was an attempt to use UML as honeypot.
It was never stable nor in heavy use.
As Al Viro and Christoph Hellwig pointed some major issues out
it is better to let it die.
Signed-off-by: Richard Weinberger <richard@nod.at>
Changes in this update:
o regression fix for new rename whiteout code
o regression fixes for new superblock generic per-cpu counter code
o fix for incorrect error return sign introduced in 3.17
o metadata corruption fixes that need to go back to -stable kernels
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=w5SP
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"This is a little larger than I'd like late in the release cycle, but
all the fixes are for regressions introduced in the 4.1-rc1 merge, or
are needed back in -stable kernels fairly quickly as they are
filesystem corruption or userspace visible correctness issues.
Changes in this update:
- regression fix for new rename whiteout code
- regression fixes for new superblock generic per-cpu counter code
- fix for incorrect error return sign introduced in 3.17
- metadata corruption fixes that need to go back to -stable kernels"
* tag 'xfs-for-linus-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: fix broken i_nlink accounting for whiteout tmpfile inode
xfs: xfs_iozero can return positive errno
xfs: xfs_attr_inactive leaves inconsistent attr fork state behind
xfs: extent size hints can round up extents past MAXEXTLEN
xfs: inode and free block counters need to use __percpu_counter_compare
percpu_counter: batch size aware __percpu_counter_compare()
xfs: use percpu_counter_read_positive for mp->m_icount
gcc-5.0 warns about a potential uninitialized variable use in nfsd:
fs/nfsd/nfs4state.c: In function 'nfsd4_process_open2':
fs/nfsd/nfs4state.c:3781:3: warning: 'old_deny_bmap' may be used uninitialized in this function [-Wmaybe-uninitialized]
reset_union_bmap_deny(old_deny_bmap, stp);
^
fs/nfsd/nfs4state.c:3760:16: note: 'old_deny_bmap' was declared here
unsigned char old_deny_bmap;
^
This is a false positive, the code path that is warned about cannot
actually be reached.
This adds an initialization for the variable to make the warning go
away.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Whether or not a file system supports acls can be determined with
IS_POSIXACL(inode) and does not require trying to fetch any acls; the code for
computing the supported_attrs and aclsupport attributes can be simplified.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv2 can set the atime and/or mtime of a file to specific timestamps but not
to the server's current time. To implement the equivalent of utimes("file",
NULL), it uses a heuristic.
NFSv3 and later do support setting the atime and/or mtime to the server's
current time directly. The NFSv2 heuristic is still enabled, and causes
timestamps to be set wrong sometimes.
Fix this by moving the heuristic into the NFSv2 specific code. We can leave it
out of the create code path: the owner can always set timestamps arbitrarily,
and the workaround would never trigger.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
when we find that a child has died while we'd been trying to ascend,
we should go into the first live sibling itself, rather than its sibling.
Off-by-one in question had been introduced in "deal with deadlock in
d_walk()" and the fix needs to be backported to all branches this one
has been backported to.
Cc: stable@vger.kernel.org # 3.2 and later
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Both 'i' and 'bits_per_entry' are signed integers but the result is a
u64 block number. Cast i to u64 to avoid truncation on 32-bit targets.
Found by Coverity (CID 200679).
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The count variable is used to iterate down to (below) zero from the size
of the bitmap and handle the one-filling the remainder of the last
partial bitmap block. The loop conditional expects count to be signed
in order to detect when the final block is processed, after which count
goes negative.
Unfortunately, a recent change made this unsigned along with some other
related fields. The result of is this is that during mount,
omfs_get_imap will overrun the bitmap array and corrupt memory unless
number of blocks happens to be a multiple of 8 * blocksize.
Fix by changing count back to signed: it is guaranteed to fit in an s32
without overflow due to an enforced limit on the number of blocks in the
filesystem.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A static checker found the following issue in the error path for
omfs_fill_super:
fs/omfs/inode.c:552 omfs_fill_super()
warn: missing error code here? 'd_make_root()' failed. 'ret' = '0'
Fix by returning -ENOMEM in this case.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
match_token() expects a NULL terminator at the end of the token list so
that it would know where to stop. Not having one causes it to overrun
to invalid memory.
In practice, passing a mount option that omfs didn't recognize would
sometimes panic the system.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
load_elf_binary() returns `retval', not `error'.
Fixes: a87938b2e2 ("fs/binfmt_elf.c: fix bug in loading of PIE binaries")
Reported-by: James Hogan <james.hogan@imgtec.com>
Cc: Michael Davidson <md@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable mounting of filesystems with sparse inode support enabled. Add
the incompat. feature bit to the *_ALL mask.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_ifree_cluster() is called to mark all in-memory inodes and inode
buffers as stale. This occurs after we've removed the inobt records and
dropped any references of inobt data. xfs_ifree_cluster() uses the
starting inode number to walk the namespace of inodes expected for a
single chunk a cluster buffer at a time. The cluster buffer disk
addresses are calculated by decoding the sequential inode numbers
expected from the chunk.
The problem with this approach is that if the inode chunk being removed
is a sparse chunk, not all of the buffer addresses that are calculated
as part of this sequence may be inode clusters. Attempting to acquire
the buffer based on expected inode characterstics (i.e., cluster length)
can lead to errors and is generally incorrect.
We already use a couple variables to carry requisite state from
xfs_difree() to xfs_ifree_cluster(). Rather than add a third, define a
new internal structure to carry the existing parameters through these
functions. Add an alloc field that represents the physical allocation
bitmap of inodes in the chunk being removed. Modify xfs_ifree_cluster()
to check each inode against the bitmap and skip the clusters that were
never allocated as real inodes on disk.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
An inode chunk is currently added to the transaction free list based on
a simple fsb conversion and hardcoded chunk length. The nature of sparse
chunks is such that the physical chunk of inodes on disk may consist of
one or more discontiguous parts. Blocks that reside in the holes of the
inode chunk are not inodes and could be allocated to any other use or
not allocated at all.
Refactor the existing xfs_bmap_add_free() call into the
xfs_difree_inode_chunk() helper. The new helper uses the existing
calculation if a chunk is not sparse. Otherwise, use the inobt record
holemask to free the contiguous regions of the chunk.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Inode allocation from an existing record with free inodes traditionally
selects the first inode available according to the ir_free mask. With
sparse inode chunks, the ir_free mask could refer to an unallocated
region. We must mask the unallocated regions out of ir_free before using
it to select a free inode in the chunk.
Update the xfs_inobt_first_free_inode() helper to find the first free
inode available of the allocated regions of the inode chunk.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Sparse inode allocations generally only occur when full inode chunk
allocation fails. This requires some level of filesystem space usage and
fragmentation.
For filesystems formatted with sparse inode chunks enabled, do random
sparse inode chunk allocs when compiled in DEBUG mode to increase test
coverage.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_ialloc_ag_alloc() makes several attempts to allocate a full inode
chunk. If all else fails, reduce the allocation to the sparse length and
alignment and attempt to allocate a sparse inode chunk.
If sparse chunk allocation succeeds, check whether an inobt record
already exists that can track the chunk. If so, inherit and update the
existing record. Otherwise, insert a new record for the sparse chunk.
Create helpers to align sparse chunk inode records and insert or update
existing records in the inode btrees. The xfs_inobt_insert_sprec()
helper implements the merge or update semantics required for sparse
inode records with respect to both the inobt and finobt. To update the
inobt, either insert a new record or merge with an existing record. To
update the finobt, use the updated inobt record to either insert or
replace an existing record.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The inobt record holemask field is a condensed data type designed to fit
into the existing on-disk record and is zero based (allocated regions
are set to 0, sparse regions are set to 1) to provide backwards
compatibility. This makes the type somewhat complex for use in higher
level inode manipulations such as individual inode allocation, etc.
Rather than foist the complexity of dealing with this field to every bit
of logic that requires inode granular information, create a helper to
convert the holemask to an inode allocation bitmap. The inode allocation
bitmap is inode granularity similar to the inobt record free mask and
indicates which inodes of the chunk are physically allocated on disk,
irrespective of whether the inode is considered allocated or free by the
filesystem.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Recovery of icreate transactions assumes hardcoded values for the inode
count and chunk length.
Sparse inode chunks are allocated in units of m_ialloc_min_blks. Update
the icreate validity checks to allow for appropriately sized inode
chunks and verify the inode count matches what is expected based on the
extent length rather than assuming a hardcoded count.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
v5 superblocks use an ordered log item for logging the initialization of
inode chunks. The icreate log item is currently hardcoded to an inode
count of 64 inodes.
The agbno and extent length are used to initialize the inode chunk from
log recovery. While an incorrect inode count does not lead to bad inode
chunk initialization, we should pass the correct inode count such that log
recovery has enough data to perform meaningful validity checks on the
chunk.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The bulkstat and inumbers mechanisms make the assumption that inode
records consist of a full 64 inode chunk in several places. For example,
this is used to track how many inodes have been processed overall as
well as to determine whether a record has allocated inodes that must be
handled.
This assumption is invalid for sparse inode records. While sparse inodes
will be marked as free in the ir_free mask, they are not accounted as
free in ir_freecount because they cannot be allocated. Therefore,
ir_freecount may be less than 64 inodes in an inode record for which all
physically allocated inodes are free (and in turn ir_freecount < 64 does
not signify that the record has allocated inodes).
The new in-core inobt record format includes the ir_count field. This
holds the number of true, physical inodes tracked by the record. The
in-core ir_count field is always valid as it is hardcoded to
XFS_INODES_PER_CHUNK when sparse inodes is not enabled. Use ir_count to
handle inode records correctly in bulkstat in a generic manner.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The inode btrees track 64 inodes per record regardless of inode size.
Thus, inode chunks on disk vary in size depending on the size of the
inodes. This creates a contiguous allocation requirement for new inode
chunks that can be difficult to satisfy on an aged and fragmented (free
space) filesystems.
The inode record freecount currently uses 4 bytes on disk to track the
free inode count. With a maximum freecount value of 64, only one byte is
required. Convert the freecount field to a single byte and use two of
the remaining 3 higher order bytes left for the hole mask field. Use the
final leftover byte for the total count field.
The hole mask field tracks holes in the chunks of physical space that
the inode record refers to. This facilitates the sparse allocation of
inode chunks when contiguous chunks are not available and allows the
inode btrees to identify what portions of the chunk contain valid
inodes. The total count field contains the total number of valid inodes
referred to by the record. This can also be deduced from the hole mask.
The count field provides clarity and redundancy for internal record
verification.
Note that neither of the new fields can be written to disk on fs'
without sparse inode support. Doing so writes to the high-order bytes of
freecount and causes corruption from the perspective of older kernels.
The on-disk inobt record data structure is updated with a union to
distinguish between the original, "full" format and the new, "sparse"
format. The conversion routines to get, insert and update records are
updated to translate to and from the on-disk record accordingly such
that freecount remains a 4-byte value on non-supported fs, yet the new
fields of the in-core record are always valid with respect to the
record. This means that higher level code can refer to the current
in-core record format unconditionally and lower level code ensures that
records are translated to/from disk according to the capabilities of the
fs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Define an fs geometry bit for sparse inode chunks such that the
characteristic of the fs can be identified by userspace.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The sparse inode chunks feature uses the helper function to enable the
allocation of sparse inode chunks. The incompatible feature bit is set
on disk at mkfs time to prevent mount from unsupported kernels.
Also, enforce the inode alignment requirements required for sparse inode
chunks at mount time. When enabled, full inode chunks (and all inode
record) alignment is increased from cluster size to inode chunk size.
Sparse inode alignment must match the cluster size of the fs. Both
superblock alignment fields are set as such by mkfs when sparse inode
support is enabled.
Finally, warn that sparse inode chunks is an experimental feature until
further notice.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_ialloc_ag_select() iterates through the allocation groups looking
for free inodes or free space to determine whether to allow an inode
allocation to proceed. If no free inodes are available, it assumes that
an AG must have an extent longer than mp->m_ialloc_blks.
Sparse inode chunk support currently allows for allocations smaller than
the traditional inode chunk size specified in m_ialloc_blks. The current
minimum sparse allocation is set in the superblock sb_spino_align field
at mkfs time. Create a new m_ialloc_min_blks field in xfs_mount and use
this to represent the minimum supported allocation size for inode
chunks. Initialize m_ialloc_min_blks at mount time based on whether
sparse inodes are supported.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add sb_spino_align to the superblock to specify sparse inode chunk
alignment. This also currently represents the minimum allowable sparse
chunk allocation size.
Signed-off-by: Brian Foster <bfoster@redhat.com>
The block allocator supports various arguments to tweak block allocation
behavior and set allocation requirements. The sparse inode chunk feature
introduces a new requirement not supported by the current arguments.
Sparse inode allocations must convert or merge into an inode record that
describes a fixed length chunk (64 inodes x inodesize). Full inode chunk
allocations by definition always result in valid inode records. Sparse
chunk allocations are smaller and the associated records can refer to
blocks not owned by the inode chunk. This model can result in invalid
inode records in certain cases.
For example, if a sparse allocation occurs near the start of an AG, the
aligned inode record for that chunk might refer to agbno 0. If an
allocation occurs towards the end of the AG and the AG size is not
aligned, the inode record could refer to blocks beyond the end of the
AG. While neither of these scenarios directly result in corruption, they
both insert invalid inode records and at minimum cause repair to
complain, are unlikely to merge into full chunks over time and set land
mines for other areas of code.
To guarantee sparse inode chunk allocation creates valid inode records,
support the ability to specify an agbno range limit for
XFS_ALLOCTYPE_NEAR_BNO block allocations. The min/max agbno's are
specified in the allocation arguments and limit the block allocation
algorithms to that range. The starting 'agbno' hint is clamped to the
range if the specified agbno is out of range. If no sufficient extent is
available within the range, the allocation fails. For backwards
compatibility, the min/max fields can be initialized to 0 to disable
range limiting (e.g., equivalent to min=0,max=agsize).
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_difree_inobt() uses logic in a couple places that assume inobt
records refer to fully allocated chunks. Specifically, the use of
mp->m_ialloc_inos can cause problems for inode chunks that are sparsely
allocated. Sparse inode chunks can, by definition, define a smaller
number of inodes than a full inode chunk.
Fix the logic that determines whether an inode record should be removed
from the inobt to use the ir_free mask rather than ir_freecount. Fix the
agi counters modification to use ir_freecount to add the actual number
of inodes freed rather than assuming a full inode chunk.
Also make sure that we preserve the behavior to not remove inode chunks
if the block size is large enough for multiple inode chunks (e.g.,
bsize=64k, isize=512). This behavior was previously implicit in that in
such configurations, ir.freecount of a single record never matches
m_ialloc_inos. Hence, add some comments as well.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Inode allocation from sparse inode records must filter the ir_free mask
against ir_holemask. In preparation for this requirement, create a
helper to allocate an individual inode from an inode record.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
I use f2fs filesystem with /data partition on my Android phone
by the default mount options. When I remount /data in order to
adding discard option to run some benchmarks, I find the default
options such as background_gc, user_xattr and acl turned off.
So I introduce a function named default_options in super.c. It do
some default setting, and both mount and remount operations will
call this function to complete default setting.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
No matter what the key is valid or not, readdir shows the dir entries correctly.
So, lookup should not failed.
But, we expect further accesses should be denied from open, rename, link, and so
on.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
1. mount $mnt
2. cp data $mnt/
3. umount $mnt
4. log out
5. log in
6. cat $mnt/data
-> panic, due to no i_crypt_info.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch implements encryption support for symlink.
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a bit flag to indicate whether or not i_name in the inode
is encrypted.
If this name is encrypted, we can't do recover_dentry during roll-forward.
So, f2fs_sync_file() needs to do checkpoint, if this will be needed in future.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch implements filename encryption support for f2fs_lookup.
Note that, f2fs_find_entry should be outside of f2fs_(un)lock_op().
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds encryption support in read and write paths.
Note that, in f2fs, we need to consider cleaning operation.
In cleaning procedure, we must avoid encrypting and decrypting written blocks.
So, this patch implements move_encrypted_block().
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch activates the following APIs for encryption support.
The rules quoted by ext4 are:
- An unencrypted directory may contain encrypted or unencrypted files
or directories.
- All files or directories in a directory must be protected using the
same key as their containing directory.
- Encrypted inode for regular file should not have inline_data.
- Encrypted symlink and directory may have inline_data and inline_dentry.
This patch activates the following APIs.
1. f2fs_link : validate context
2. f2fs_lookup : ''
3. f2fs_rename : ''
4. f2fs_create/f2fs_mkdir : inherit its dir's context
5. f2fs_direct_IO : do buffered io for regular files
6. f2fs_open : check encryption info
7. f2fs_file_mmap : ''
8. f2fs_setattr : ''
9. f2fs_file_write_iter : '' (Called by sys_io_submit)
10. f2fs_fallocate : do not support fcollapse
11. f2fs_evict_inode : free_encryption_info
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds filename encryption infra.
Most of codes are copied from ext4 part, but changed to adjust f2fs
directory structure.
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch copies from encrypt_key.c in ext4, and modifies for f2fs.
Use GFP_NOFS, since _f2fs_get_encryption_info is called under f2fs_lock_op.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <muslukhovi@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Most of parts were copied from ext4, except:
- add f2fs_restore_and_release_control_page which returns control page and
restore control page
- remove ext4_encrypted_zeroout()
- remove sbi->s_file_encryption_mode & sbi->s_dir_encryption_mode
- add f2fs_end_io_crypto_work for mpage_end_io
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds encryption policy and password salt support through ioctl
implementation.
It adds three ioctls:
F2FS_IOC_SET_ENCRYPTION_POLICY,
F2FS_IOC_GET_ENCRYPTION_POLICY,
F2FS_IOC_GET_ENCRYPTION_PWSALT, which use xattr operations.
Note that, these definition and codes are taken from ext4 crypto support.
For f2fs, xattr operations and on-disk flags for superblock and inode were
changed.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ildar Muslukhov <muslukhovi@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs encryption config.
This patch integrates:
"ext4 crypto: require CONFIG_CRYPTO_CTR if ext4 encryption is enabled
On arm64 this is apparently needed for CTS mode to function correctly.
Otherwise attempts to use CTS return ENOENT."
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes overflow when do cat /sys/kernel/debug/f2fs/status.
If a section is relatively large, dist value can be overflowed.
Reported-by: Yossi Goldfill <ygoldfill@radianmemory.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, FALLOC_FL_ZERO_RANGE flag in ->fallocate is supported in ext4/xfs.
In commit, the semantics of this flag is descripted as following:"
1) Make sure that both offset and len are block size aligned.
2) Update the i_size of inode by len bytes.
3) Compute the file's logical block number against offset. If the computed
block number is not the starting block of the extent, split the extent
such that the block number is the starting block of the extent.
4) Shift all the extents which are lying between
[offset, last allocated extent] towards right by len bytes. This step
will make a hole of len bytes at offset."
This patch implements fallocate's FALLOC_FL_ZERO_RANGE for f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, FALLOC_FL_COLLAPSE_RANGE flag in ->fallocate is supported in ext4/xfs.
In commit, the semantics of this flag is descripted as following:"
1) It collapses the range lying between offset and length by removing any
data blocks which are present in this range and than updates all the
logical offsets of extents beyond "offset + len" to nullify the hole
created by removing blocks. In short, it does not leave a hole.
2) It should be used exclusively. No other fallocate flag in combination.
3) Offset and length supplied to fallocate should be fs block size aligned
in case of xfs and ext4.
4) Collaspe range does not work beyond i_size."
This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce a generic function replace_block base on recover_data_page,
and export it. So with it we can operate file's meta data which is in
CP/SSA area when we invoke fallocate with FALLOC_FL_COLLAPSE_RANGE
flag.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In set_node_addr, we try to lookup cached nat entry of inode and then
set flag in it.
But previously in this function, we have already grabbed nat entry with
current node id, if the node id is the same as the one of inode, we
do not need to lookup it in cache again.
So this patch adds condition judgment for reducing unneeded lookup.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove f2fs_make_empty() declaration, since the main body of this function
is move into do_make_empty_dir() and the function is obsolete now.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch determines to issue discard commands by comparing given minlen and
the length of produced final candidates.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a bitmap for discard issues from f2fs_trim_fs.
There-in rule is to issue discard commands only for invalidated blocks
after mount.
Once mount is done, f2fs_trim_fs trims out whole invalid area.
After ehn, it will not issue and discrads redundantly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes spin_lock, since this is covered by f2fs_lock_op already.
And, we should avoid to use page operations inside spin_lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch splits find_data_page as follows.
1. f2fs_gc
- use get_read_data_page() with read only
2. find_in_level
- use find_data_page without locked page
3. truncate_partial_page
- In the case cache_only mode, just drop cached page.
- Ohterwise, use get_lock_data_page() and guarantee to truncate
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two threads:
f2fs_delete_entry() get_new_data_page()
f2fs_reserve_block()
dn.blkaddr = XXX
lock_page(dentry_block)
truncate_hole()
dn.blkaddr = NULL
unlock_page(dentry_block)
lock_page(dentry_block)
fill the block from XXX address
add new dentries
unlock_page(dentry_block)
Later, f2fs_write_data_page() will truncate the dentry_block, since
its block address is NULL.
The reason for this was due to the wrong lock order.
In this case, we should do f2fs_reserve_block() after locking its dentry block.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_sb_info and page pointers in f2fs_io_info structure.
With this change, we can reduce a lot of parameters for IO functions.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch implements f2fs_mpage_readpages for further optimization on
encryption support.
The basic code was taken from fs/mpage.c, and changed to be simple by adjusting
that block_size is equal to page_size in f2fs.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
XFS uses the internal tmpfile() infrastructure for the whiteout inode
used for RENAME_WHITEOUT operations. For tmpfile inodes, XFS allocates
the inode, drops di_nlink, adds the inode to the agi unlinked list,
calls d_tmpfile() which correspondingly drops i_nlink of the vfs inode,
and then finishes the common inode setup (e.g., clear I_NEW and unlock).
The d_tmpfile() call was originally made inxfs_create_tmpfile(), but was
pulled up out of that function as part of the following commit to
resolve a deadlock issue:
330033d6 xfs: fix tmpfile/selinux deadlock and initialize security
As a result, callers of xfs_create_tmpfile() are responsible for either
calling d_tmpfile() or fixing up i_nlink appropriately. The whiteout
tmpfile allocation helper does neither. As a result, the vfs ->i_nlink
becomes inconsistent with the on-disk ->di_nlink once xfs_rename() links
it back into the source dentry and calls xfs_bumplink().
Update the assert in xfs_rename() to help detect this problem in the
future and update xfs_rename_alloc_whiteout() to decrement the link
count as part of the manual tmpfile inode setup.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
It was missed when we converted everything in XFs to use negative error
numbers, so fix it now. Bug introduced in 3.17 by commit 2451337 ("xfs: global
error sign conversion"), and should go back to stable kernels.
Thanks to Brian Foster for noticing it.
cc: <stable@vger.kernel.org> # 3.17, 3.18, 3.19, 4.0
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_attr_inactive() is supposed to clean up the attribute fork when
the inode is being freed. While it removes attribute fork extents,
it completely ignores attributes in local format, which means that
there can still be active attributes on the inode after
xfs_attr_inactive() has run.
This leads to problems with concurrent inode writeback - the in-core
inode attribute fork is removed without locking on the assumption
that nothing will be attempting to access the attribute fork after a
call to xfs_attr_inactive() because it isn't supposed to exist on
disk any more.
To fix this, make xfs_attr_inactive() completely remove all traces
of the attribute fork from the inode, regardless of it's state.
Further, also remove the in-core attribute fork structure safely so
that there is nothing further that needs to be done by callers to
clean up the attribute fork. This means we can remove the in-core
and on-disk attribute forks atomically.
Also, on error simply remove the in-memory attribute fork. There's
nothing that can be done with it once we have failed to remove the
on-disk attribute fork, so we may as well just blow it away here
anyway.
cc: <stable@vger.kernel.org> # 3.12 to 4.0
Reported-by: Waiman Long <waiman.long@hp.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This results in BMBT corruption, as seen by this test:
# mkfs.xfs -f -d size=40051712b,agcount=4 /dev/vdc
....
# mount /dev/vdc /mnt/scratch
# xfs_io -ft -c "extsize 16m" -c "falloc 0 30g" -c "bmap -vp" /mnt/scratch/foo
which results in this failure on a debug kernel:
XFS: Assertion failed: (blockcount & xfs_mask64hi(64-BMBT_BLOCKCOUNT_BITLEN)) == 0, file: fs/xfs/libxfs/xfs_bmap_btree.c, line: 211
....
Call Trace:
[<ffffffff814cf0ff>] xfs_bmbt_set_allf+0x8f/0x100
[<ffffffff814cf18d>] xfs_bmbt_set_all+0x1d/0x20
[<ffffffff814f2efe>] xfs_iext_insert+0x9e/0x120
[<ffffffff814c7956>] ? xfs_bmap_add_extent_hole_real+0x1c6/0xc70
[<ffffffff814c7956>] xfs_bmap_add_extent_hole_real+0x1c6/0xc70
[<ffffffff814caaab>] xfs_bmapi_write+0x72b/0xed0
[<ffffffff811c72ac>] ? kmem_cache_alloc+0x15c/0x170
[<ffffffff814fe070>] xfs_alloc_file_space+0x160/0x400
[<ffffffff81ddcc29>] ? down_write+0x29/0x60
[<ffffffff815063eb>] xfs_file_fallocate+0x29b/0x310
[<ffffffff811d2bc8>] ? __sb_start_write+0x58/0x120
[<ffffffff811e3e18>] ? do_vfs_ioctl+0x318/0x570
[<ffffffff811cd680>] vfs_fallocate+0x140/0x260
[<ffffffff811ce6f8>] SyS_fallocate+0x48/0x80
[<ffffffff81ddec09>] system_call_fastpath+0x12/0x17
The tracepoint that indicates the extent that triggered the assert
failure is:
xfs_iext_insert: idx 0 offset 0 block 16777224 count 2097152 flag 1
Clearly indicating that the extent length is greater than MAXEXTLEN,
which is 2097151. A prior trace point shows the allocation was an
exact size match and that a length greater than MAXEXTLEN was asked
for:
xfs_alloc_size_done: agno 1 agbno 8 minlen 2097152 maxlen 2097152
^^^^^^^ ^^^^^^^
We don't see this problem with extent size hints through the IO path
because we can't do single IOs large enough to trigger MAXEXTLEN
allocation. fallocate(), OTOH, is not limited in it's allocation
sizes and so needs help here.
The issue is that the extent size hint alignment is rounding up the
extent size past MAXEXTLEN, because xfs_bmapi_write() is not taking
into account extent size hints when calculating the maximum extent
length to allocate. xfs_bmapi_reserve_delalloc() is already doing
this, but direct extent allocation is not.
Unfortunately, the calculation in xfs_bmapi_reserve_delalloc() is
wrong, and it works only because delayed allocation extents are not
limited in size to MAXEXTLEN in the in-core extent tree. hence this
calculation does not work for direct allocation, and the delalloc
code needs fixing. This may, in fact be the underlying bug that
occassionally causes transaction overruns in delayed allocation
extent conversion, so now we know it's wrong we should fix it, too.
Many thanks to Brian Foster for finding this problem during review
of this patch.
Hence the fix, after much code reading, is to allow
xfs_bmap_extsize_align() to align partial extents when full
alignment would extend the alignment past MAXEXTLEN. We can safely
do this because all callers have higher layer allocation loops that
already handle short allocations, and so will simply run another
allocation to cover the remainder of the requested allocation range
that we ignored during alignment. The advantage of this approach is
that it also removes the need for callers to do anything other than
limit their requests to MAXEXTLEN - they don't really need to be
aware of extent size hints at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Because the counters use a custom batch size, the comparison
functions need to be aware of that batch size otherwise the
comparison does not work correctly. This leads to ASSERT failures
on generic/027 like this:
XFS: Assertion failed: 0, file: fs/xfs/xfs_mount.c, line: 1099
------------[ cut here ]------------
....
Call Trace:
[<ffffffff81522a39>] xfs_mod_icount+0x99/0xc0
[<ffffffff815285cb>] xfs_trans_unreserve_and_mod_sb+0x28b/0x5b0
[<ffffffff8152f941>] xfs_log_commit_cil+0x321/0x580
[<ffffffff81528e17>] xfs_trans_commit+0xb7/0x260
[<ffffffff81503d4d>] xfs_bmap_finish+0xcd/0x1b0
[<ffffffff8151da41>] xfs_inactive_ifree+0x1e1/0x250
[<ffffffff8151dbe0>] xfs_inactive+0x130/0x200
[<ffffffff81523a21>] xfs_fs_evict_inode+0x91/0xf0
[<ffffffff811f3958>] evict+0xb8/0x190
[<ffffffff811f433b>] iput+0x18b/0x1f0
[<ffffffff811e8853>] do_unlinkat+0x1f3/0x320
[<ffffffff811d548a>] ? filp_close+0x5a/0x80
[<ffffffff811e999b>] SyS_unlinkat+0x1b/0x40
[<ffffffff81e0892e>] system_call_fastpath+0x12/0x71
This is a regression introduced by commit 501ab32 ("xfs: use generic
percpu counters for inode counter").
This patch fixes the same problem for both the inode counter and the
free block counter in the superblocks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Function percpu_counter_read just return the current counter, which can be
negative. This will cause the checking of "allocated inode
counts <= m_maxicount" false positive. Use percpu_counter_read_positive can
solve this problem, and be consistent with the purpose to introduce percpu
mechanism to xfs.
Signed-off-by: George Wang <xuw2015@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Most code already uses consts for the struct kernel_param_ops,
sweep the kernel for the last offending stragglers. Other than
include/linux/moduleparam.h and kernel/params.c all other changes
were generated with the following Coccinelle SmPL patch. Merge
conflicts between trees can be handled with Coccinelle.
In the future git could get Coccinelle merge support to deal with
patch --> fail --> grammar --> Coccinelle --> new patch conflicts
automatically for us on patches where the grammar is available and
the patch is of high confidence. Consider this a feature request.
Test compiled on x86_64 against:
* allnoconfig
* allmodconfig
* allyesconfig
@ const_found @
identifier ops;
@@
const struct kernel_param_ops ops = {
};
@ const_not_found depends on !const_found @
identifier ops;
@@
-struct kernel_param_ops ops = {
+const struct kernel_param_ops ops = {
};
Generated-by: Coccinelle SmPL
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: cocci@systeme.lip6.fr
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pull cifs fixes from Steve French:
"Back from SambaXP - now have 8 small CIFS bug fixes to merge"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Fix race condition on RFC1002_NEGATIVE_SESSION_RESPONSE
Fix to convert SURROGATE PAIR
cifs: potential missing check for posix_lock_file_wait
Fix to check Unique id and FileType when client refer file directly.
CIFS: remove an unneeded NULL check
[cifs] fix null pointer check
Fix that several functions handle incorrect value of mapchars
cifs: Don't replace dentries for dfs mounts
Pull two overlayfs fixes from Miklos Szeredi:
"Overlayfs rmdir() failed to check for emptiness in one case; this was
introduced in 4.0. The other bug was there since day one: failure to
mount if upper fs is full, which bit some OpenWRT folks"
* 'overlayfs-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: mount read-only if workdir can't be created
ovl: don't remove non-empty opaque directory
To support seed sysfs layout and represent seed fsid under
the sprout we need the facility to create fsid under the
specified parent.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs_kobj_add_device() does not need fs_info any more.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Just a helper function to clean up the sysfs fsid kobjects.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This patch will provide a framework and help to create attributes
from the structure btrfs_fs_devices which are available even before
fs_info is created. So by moving the parent kobject super_kobj from
fs_info to btrfs_fs_devices, it will help to create attributes
from the btrfs_fs_devices as well.
Patches on top of this patch now will be able to create the
sys/fs/btrfs/fsid kobject and attributes from btrfs_fs_devices
when devices are scanned and registered to the kernel.
Just to note, this does not change any of the existing btrfs sysfs
external kobject names and its attributes and not even the life
cycle of them. Changes are internal only. And to ensure the same,
this path has been tested with various device operations and,
checking and comparing the sysfs kobjects and attributes with
sysfs kobject and attributes with out this patch, and they remain
same.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Separate device kobject and its attribute creation so that device
kobject can be created from the device discovery thread.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
As of now btrfs_attrs are provided using the default_attrs through
the kset. Separate them and create the default_attrs using the
sysfs_create_files instead. By doing this we will have the
flexibility that device discovery thread could create fsid
kobject.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We need it in a seperate function so that it can be called from the
device discovery thread as well.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
As of now the order in which the kobjects are created
at btrfs_sysfs_add_one() is..
fsid
features
unknown features (dynamic features)
devices.
Since we would move fsid and device kobject to fs_devices
from fs_info structure, this patch will reorder in which
the kobjects are created as below.
fsid
devices
features
unknown features (dynamic features)
And hence the btrfs_sysfs_remove_one() will follow the same
in reverse order. and the device kobject destroy now can
be moved into the function __btrfs_sysfs_remove_one()
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Since the failure code in the btrfs_sysfs_add_one() can
call btrfs_sysfs_remove_one() even before device_dir_kobj
has been created we need to check if its null.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The sysfs clean up self test like in the below code fails, since
fs_info->device_dir_kobject still points to its stale kobject.
Reseting this pointer will help to fix this.
open_ctree()
{
ret = btrfs_sysfs_add_one(fs_info);
::
+ btrfs_sysfs_remove_one(fs_info);
+ ret = btrfs_sysfs_add_one(fs_info);
+ if (ret) {
+ pr_err("BTRFS: failed to init sysfs interface: %d\n", ret);
+ goto fail_block_groups;
+ }
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Theoritically need to remove the device links attributes, but since its entire device
kobject was removed, so there wasn't any issue of about it. Just do it nicely.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
kobject_unregister is to handle the release of the kobject,
its completion init is being called in btrfs_sysfs_add_one(),
so we don't have to do the same in the open_ctree() again.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The following test case fails indicating that, thread tried to init an initialized object.
kernel: [232104.016513] kobject (ffff880006c1c980): tried to init an initialized object, something is seriously wrong.
btrfs_sysfs_remove_one() self test code:
open_tree()
{
::
ret = btrfs_sysfs_add_one(fs_info);
if (ret) {
pr_err("BTRFS: failed to init sysfs interface: %d\n", ret);
goto fail_block_groups;
}
+ btrfs_sysfs_remove_one(fs_info);
+ ret = btrfs_sysfs_add_one(fs_info);
+ if (ret) {
+ pr_err("BTRFS: failed to init sysfs interface: %d\n", ret);
+ goto fail_block_groups;
+ }
cleaning up the unregistered kobject fixes this.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
unix_stream_recvmsg is refactored to unix_stream_read_generic in this
patch and enhanced to deal with pipe splicing. The refactoring is
inneglible, we mostly have to deal with a non-existing struct msghdr
argument.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sentence "Returns 0 on success or error" might be misinterpreted as
"the function will always returns 0", make it less ambiguous.
Also, use the word "failure" as the contrary of "success".
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Grabbing the parent is not happening anymore since 2010 (e72ceb8cca
"sysfs: Remove sysfs_get/put_active_two"). Remove this confusing
comment.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull btrfs fixes from Chris Mason:
"I fixed up a regression from 4.0 where conversion between different
raid levels would sometimes bail out without converting.
Filipe tracked down a race where it was possible to double allocate
chunks on the drive.
Mark has a fix for fiemap. All three will get bundled off for stable
as well"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix regression in raid level conversion
Btrfs: fix racy system chunk allocation when setting block group ro
btrfs: clear 'ret' in btrfs_check_shared() loop
Conflicts:
drivers/net/ethernet/cadence/macb.c
drivers/net/phy/phy.c
include/linux/skbuff.h
net/ipv4/tcp.c
net/switchdev/switchdev.c
Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD}
renaming overlapping with net-next changes of various
sorts.
phy.c was a case of two changes, one adding a local
variable to a function whilst the second was removing
one.
tcp.c overlapped a deadlock fix with the addition of new tcp_info
statistic values.
macb.c involved the addition of two zyncq device entries.
skbuff.h involved adding back ipv4_daddr to nf_bridge_info
whilst net-next changes put two other existing members of
that struct into a union.
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for
non-chains") regressed all existing callers that followed this pattern:
1) saving a bio's original bi_end_io
2) wiring up an intermediate bi_end_io
3) restoring the original bi_end_io from intermediate bi_end_io
4) calling bio_endio() to execute the restored original bi_end_io
The regression was due to BIO_CHAIN only ever getting set if
bio_inc_remaining() is called. For the above pattern it isn't set until
step 3 above (step 2 would've needed to establish BIO_CHAIN). As such
the first bio_endio(), in step 2 above, never decremented __bi_remaining
before calling the intermediate bi_end_io -- leaving __bi_remaining with
the value 1 instead of 0. When bio_inc_remaining() occurred during step
3 it brought it to a value of 2. When the second bio_endio() was
called, in step 4 above, it should've called the original bi_end_io but
it didn't because there was an extra reference that wasn't dropped (due
to atomic operations being optimized away since BIO_CHAIN wasn't set
upfront).
Fix this issue by removing the __bi_remaining management complexity for
all callers that use the above pattern -- bio_chain() is the only
interface that _needs_ to be concerned with __bi_remaining. For the
above pattern callers just expect the bi_end_io they set to get called!
Remove bio_endio_nodec() and also remove all bio_inc_remaining() calls
that aren't associated with the bio_chain() interface.
Also, the bio_inc_remaining() interface has been moved local to bio.c.
Fixes: c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
EVM needs to be atomically updated when removing xattrs.
Otherwise concurrent EVM verification may fail in between.
This patch fixes by moving i_mutex unlocking after calling
EVM hook. fsnotify_xattr() is also now called while locked
the same way as it is done in __vfs_setxattr_noperm.
Changelog:
- remove unused 'inode' variable.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
If we set ramoops.mem_type=1 in command line, the current
code can not change mem_type to 1, because it is assigned
to 0 in function ramoops_register_dummy.
This patch make it possible to change mem_type parameter
in command line.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
On some devices the persistent memory contains junk after a cold boot,
and /dev/pstore/dmesg-ramoops-* are created with random data which is
not the result of a kernel crash.
This patch adds a ramoops header check and skips any
persistent_ram_zone that does not have a valid header.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The value of cxt->record_size does not change in the loop,
so this patch optimize the assign statement by dropping
sz entirely and using cxt->record_size in its place.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This patch update the module parameter backend, so it is visible
through /sys/module/pstore/parameters/backend.
For example:
if pstore backend is ramoops, with this patch:
# cat /sys/module/pstore/parameters/backend
ramoops
and without this patch:
# cat /sys/module/pstore/parameters/backend
(null)
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Acked-by: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
pstore_compress() uses static stream buffer for zlib-deflate which
easily crashes when several concurrent threads use one shared state.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Tony Luck <tony.luck@intel.com>
There are some missing braces here which means this function never
succeeds.
Fixes: e9d4cf411f ('udf: improve error management in udf_CS0toUTF8()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This patch fixes a race condition that occurs when connecting
to a NT 3.51 host without specifying a NetBIOS name.
In that case a RFC1002_NEGATIVE_SESSION_RESPONSE is received
and the SMB negotiation is reattempted, but under some conditions
it leads SendReceive() to hang forever while waiting for srv_mutex.
This, in turn, sets the calling process to an uninterruptible sleep
state and makes it unkillable.
The solution is to unlock the srv_mutex acquired in the demux
thread *before* going to sleep (after the reconnect error) and
before reattempting the connection.
Garbled characters happen by using surrogate pair for filename.
(replace each 1 character to ??)
[Steps to Reproduce for bug]
client# touch $(echo -e '\xf0\x9d\x9f\xa3')
client# touch $(echo -e '\xf0\x9d\x9f\xa4')
client# ls -li
You see same inode number, same filename(=?? and ??) .
Fix the bug about these functions do not consider about surrogate pair (and IVS).
cifs_utf16_bytes()
cifs_mapchar()
cifs_from_utf16()
cifsConvertToUTF16()
Reported-by: Nakajima Akira <nakajima.akira@nttcom.co.jp>
Signed-off-by: Nakajima Akira <nakajima.akira@nttcom.co.jp>
Signed-off-by: Steve French <smfrench@gmail.com>
posix_lock_file_wait may fail under certain circumstances, and its result is
usually checked/returned. But given the complexity of cifs, I'm not sure if
the result is intentially left unchecked and always expected to succeed.
Signed-off-by: Chengyu Song <csong84@gatech.edu>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Steve French <smfrench@gmail.com>
When you refer file directly on cifs client,
(e.g. ls -li <filename>, cd <dir>, stat <filename>)
the function return old inode number and filetype from old inode cache,
though server has different inode number or filetype.
When server is Windows, cifs client has same problem.
When Server is Windows
, This patch fixes bug in different filetype,
but does not fix bug in different inode number.
Because QUERY_PATH_INFO response by Windows does not include inode number(Index Number) .
BUG INFO
https://bugzilla.kernel.org/show_bug.cgi?id=90021https://bugzilla.kernel.org/show_bug.cgi?id=90031
Reported-by: Nakajima Akira <nakajima.akira@nttcom.co.jp>
Signed-off-by: Nakajima Akira <nakajima.akira@nttcom.co.jp>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Commit 2f0810880f changed
btrfs_set_block_group_ro to avoid trying to allocate new chunks with the
new raid profile during conversion. This fixed failures when there was
no space on the drive to allocate a new chunk, but the metadata
reserves were sufficient to continue the conversion.
But this ended up causing a regression when the drive had plenty of
space to allocate new chunks, mostly because reduce_alloc_profile isn't
using the new raid profile.
Fixing btrfs_reduce_alloc_profile is a bigger patch. For now, do a
partial revert of 2f0810880, and don't error out if we hit ENOSPC.
Signed-off-by: Chris Mason <clm@fb.com>
Tested-by: Dave Sterba <dsterba@suse.cz>
Reported-by: Holger Hoffstaette <holger.hoffstaette@googlemail.com>
Smatch complains because we dereference "ses->server" without checking
some lines earlier inside the call to get_next_mid(ses->server).
fs/cifs/cifssmb.c:4921 CIFSGetDFSRefer()
warn: variable dereferenced before check 'ses->server' (see line 4899)
There is only one caller for this function get_dfs_path() and it always
passes a non-null "ses->server" pointer so this NULL check can be
removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Dan Carpenter pointed out an inconsistent null pointer check
in smb2_hdr_assemble that was pointed out by static checker.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Sachin Prabhu <sprabhu@redhat.com>
CC: Dan Carpenter <dan.carpenter@oracle.com>w
If while setting a block group read-only we end up allocating a system
chunk, through check_system_chunk(), we were not doing it while holding
the chunk mutex which is a problem if a concurrent chunk allocation is
happening, through do_chunk_alloc(), as it means both block groups can
end up using the same logical addresses and physical regions in the
device(s). So make sure we hold the chunk mutex.
Cc: stable@vger.kernel.org # 4.0+
Fixes: 2f0810880f ("btrfs: delete chunk allocation attemp when
setting block group ro")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_check_shared() is leaking a return value of '1' from
find_parent_nodes(). As a result, callers (in this case, extent_fiemap())
are told extents are shared when they are not. This in turn broke fiemap on
btrfs for kernels v3.18 and up.
The fix is simple - we just have to clear 'ret' after we are done processing
the results of find_parent_nodes().
It wasn't clear to me at first what was happening with return values in
btrfs_check_shared() and find_parent_nodes() - thanks to Josef for the help
on irc. I added documentation to both functions to make things more clear
for the next hacker who might come across them.
If we could queue this up for -stable too that would be great.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Highlights include:
- Fix a Linux-4.1 regression affecting stat()
- Take an extra reference to fl->fl_file when running a setlk
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ChTV
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull two NFS client bugfixes from Trond Myklebust:
"Highlights include:
- fix a Linux-4.1 regression affecting stat()
- take an extra reference to fl->fl_file when running a setlk"
* tag 'nfs-for-4.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: take extra reference to fl->fl_file when running a setlk
nfs: stat(2) fails during cthon04 basic test5 on NFSv4.0
Since the big barrier rewrite/removal in 2007 we never fail FLUSH or
FUA requests, which means we can remove the magic BIO_EOPNOTSUPP flag
to help propagating those to the buffer_head layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
OpenWRT folks reported that overlayfs fails to mount if upper fs is full,
because workdir can't be created. Wordir creation can fail for various
other reasons too.
There's no reason that the mount itself should fail, overlayfs can work
fine without a workdir, as long as the overlay isn't modified.
So mount it read-only and don't allow remounting read-write.
Add a couple of WARN_ON()s for the impossible case of workdir being used
despite being read-only.
Reported-by: Bastian Bittorf <bittorf@bluebottle.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: <stable@vger.kernel.org> # v3.18+
Since set_mb() is really about an smp_mb() -- not a IO/DMA barrier
like mb() rename it to match the recent smp_load_acquire() and
smp_store_release().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
bi was already declared and initialized globally in gfs2_rbm_find()
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Use slab caches the ext4_crypto_ctx and ext4_crypt_info structures for
slighly better memory efficiency and debuggability.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Liu Bo