Commit Graph

209 Commits

Author SHA1 Message Date
Anton Blanchard a465f9b694 powerpc: Move is_32bit_task
Move is_32bit_task into asm/thread_info.h, that allows us to test for
32/64bit tasks without an ugly CONFIG_PPC64 ifdef.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:06 +11:00
Kumar Gala 620165f971 powerpc: Add support for using doorbells for SMP IPI
The e500mc supports the new msgsnd/doorbell mechanisms that were added in
the Power ISA 2.05 architecture.  We use the normal level doorbell for
doing SMP IPIs at this point.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:03 +11:00
Kumar Gala 812d904e39 powerpc: Fix warnings from make headers_check
include/asm/bootx.h:12: include of <linux/types.h> is preferred over <asm/types.h>
include/asm/bootx.h:57: found __[us]{8,16,32,64} type without #include <linux/types.h>
include/asm/elf.h:5: include of <linux/types.h> is preferred over <asm/types.h>
include/asm/kvm.h:23: include of <linux/types.h> is preferred over <asm/types.h>
include/asm/kvm.h:26: found __[us]{8,16,32,64} type without #include <linux/types.h>
include/asm/ps3fb.h:33: found __[us]{8,16,32,64} type without #include <linux/types.h>
include/asm/spu_info.h:27: found __[us]{8,16,32,64} type without #include <linux/types.h>
include/asm/swab.h:11: include of <linux/types.h> is preferred over <asm/types.h>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:57 +11:00
Kumar Gala 16c57b3620 powerpc: Unify opcode definitions and support
Create a new header that becomes a single location for defining PowerPC
opcodes used by code that is either generationg instructions
at runtime (fixups, debug, etc.), emulating instructions, or just
compiling instructions old assemblers don't know about.

We currently don't handle the floating point emulation or alignment decode
as both are better handled by the specific decode support they already
have.

Added support for the new dcbzl, dcbal, msgsnd, tlbilx, & wait instructions
since older assemblers don't know about them.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:56 +11:00
Steven Rostedt bf528a3a9b powerpc32, ftrace: save and restore mcount regs with macro
Impact: clean up

Use a macro to save and restore the registers for PowerPC32,
since that code is duplicated.

This is similar to the work done by Cyrill Gorcunov for the
mcount code in x86_64.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:54 +11:00
Benjamin Herrenschmidt 3b7faeb49e Merge commit 'kumar/next' into next 2009-02-18 13:23:30 +11:00
Benjamin Herrenschmidt 82a0a1cc8f Merge commit 'origin/master' into next
Manual merge of:
	arch/powerpc/include/asm/pgtable-ppc32.h
2009-02-18 13:19:25 +11:00
Philippe Gerum fbc78b07ba powerpc/mm: Fix _PAGE_CHG_MASK to protect _PAGE_SPECIAL
Fix _PAGE_CHG_MASK so that pte_modify() does not affect the _PAGE_SPECIAL bit.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13 16:37:44 +11:00
Kumar Gala 70fe3af840 powerpc/book-3e: Introduce concept of Book-3e MMU
The Power ISA 2.06 spec introduces a standard MMU programming model that
is based on the Freescale Book-E MMU programing model.  The Freescale
version is pretty backwards compatiable with the ISA 2.06 definition so
we are starting to refactor some of the Freescale code so it can be
easily shared.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-12 16:51:33 -06:00
Kumar Gala d66c82ea45 powerpc/fsl-booke: Add new ISA 2.06 page sizes and MAS defines
The Power ISA 2.06 added power of two page sizes to the embedded MMU
architecture.  Its done it such a way to be code compatiable with the
existing HW.  Made the minor code changes to support both power of two
and power of four page sizes.  Also added some new MAS bits and macros
that are defined as part of the 2.06 ISA.  Renamed some things to use
the 'Book-3e' concept to convey the new MMU that is based on the
Freescale Book-E MMU programming model.

Note, its still invalid to try and use a page size that isn't supported
by cpu.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-12 16:37:11 -06:00
Benjamin Herrenschmidt 8d30c14cab powerpc/mm: Rework I$/D$ coherency (v3)
This patch reworks the way we do I and D cache coherency on PowerPC.

The "old" way was split in 3 different parts depending on the processor type:

   - Hash with per-page exec support (64-bit and >= POWER4 only) does it
at hashing time, by preventing exec on unclean pages and cleaning pages
on exec faults.

   - Everything without per-page exec support (32-bit hash, 8xx, and
64-bit < POWER4) does it for all page going to user space in update_mmu_cache().

   - Embedded with per-page exec support does it from do_page_fault() on
exec faults, in a way similar to what the hash code does.

That leads to confusion, and bugs. For example, the method using update_mmu_cache()
is racy on SMP where another processor can see the new PTE and hash it in before
we have cleaned the cache, and then blow trying to execute. This is hard to hit but
I think it has bitten us in the past.

Also, it's inefficient for embedded where we always end up having to do at least
one more page fault.

This reworks the whole thing by moving the cache sync into two main call sites,
though we keep different behaviours depending on the HW capability. The call
sites are set_pte_at() which is now made out of line, and ptep_set_access_flags()
which joins the former in pgtable.c

The base idea for Embedded with per-page exec support, is that we now do the
flush at set_pte_at() time when coming from an exec fault, which allows us
to avoid the double fault problem completely (we can even improve the situation
more by implementing TLB preload in update_mmu_cache() but that's for later).

If for some reason we didn't do it there and we try to execute, we'll hit
the page fault, which will do a minor fault, which will hit ptep_set_access_flags()
to do things like update _PAGE_ACCESSED or _PAGE_DIRTY if needed, we just make
this guys also perform the I/D cache sync for exec faults now. This second path
is the catch all for things that weren't cleaned at set_pte_at() time.

For cpus without per-pag exec support, we always do the sync at set_pte_at(),
thus guaranteeing that when the PTE is visible to other processors, the cache
is clean.

For the 64-bit hash with per-page exec support case, we keep the old mechanism
for now. I'll look into changing it later, once I've reworked a bit how we
use _PAGE_EXEC.

This is also a first step for adding _PAGE_EXEC support for embedded platforms

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:10 +11:00
Michael Ellerman 33642d31d1 powerpc: Remove unused ppc64_terminate_msg()
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 13:38:00 +11:00
Kumar Gala 105c31df6f powerpc/fsl-booke: Cleanup init/exception setup to be runtime
We currently have a few variants of fsl-booke processors (e500v1, e500v2,
e500mc, and e200).  They all have minor differences that we had previously
been handling via ifdefs.

To move towards having this support the following changes have been made:

* PID1, PID2 only exist on e500v1 & e500v2 and should not be accessed on
  e500mc or e200.  We use MMUCFG[NPIDS] to determine which case we are
  since we only touch PID1/2 in extremely early init code.

* Not all IVORs exist on all the processors so introduce cpu_setup
  functions for each variant to setup the proper IVORs that are either
  unique or exist but have some variations between the processors

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-28 18:16:50 -06:00
Stephen Rothwell 494fd07a88 powerpc/ps3: Use dma_addr_t down through the stack
Push the dma_addr_t type usage all the way down to where the actual
values are manipulated.

Now that u64 is "unsigned long long", this removes warnings like:

arch/powerpc/platforms/ps3/system-bus.c:532: warning: passing argument 4 of 'ps3_dma_map' from incompatible pointer type
arch/powerpc/platforms/ps3/system-bus.c:649: warning: passing argument 4 of 'ps3_dma_map' from incompatible pointer type

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16 16:15:11 +11:00
Linus Torvalds 5393f78027 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits)
  powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/
  powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U-Boots
  powerpc/e500mc: Doorbells need to be taken w/exceptions disabled
  powerpc: Enable PS3 options and QPACE in ppc64_defconfig
  powerpc/powermac: Fix occasional SMP boot failure
  powerpc/cacheinfo: Rename cache_dir per-cpu variable
  hvc_console: Use kzalloc() instead of kmalloc() + memset()
  hvc_console: Do not set low_latency when using interrupts
  hvc_console: Call free_irq() only if request_irq() was successful
  hvc_console: Change an mb() to smp_mb() and add some comments
  powerpc: Cleanup from l64 to ll64 change: drivers/net
  powerpc: Cleanup from l64 to ll64 change: drivers/char
  powerpc: Cleanup from l64 to ll64 change: arch code
  powerpc: Change u64/s64 to a long long integer type
  powerpc/kexec: Check crash_base for relocatable kernel
  powerpc: Make dummy section a valid note header
  Xilinx: SPI: updated driver for device tree
  drivers/of: Add the of_find_i2c_device_by_node function.
  powerpc/xsysace: add compatible string for non-ipcore instance
  powerpc/mpc52xx: remove dead code from GPIO driver
  ...
2009-01-14 20:00:28 -08:00
Linus Torvalds bca268565f Merge branch 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits)
  [CVE-2009-0029] s390 specific system call wrappers
  [CVE-2009-0029] System call wrappers part 33
  [CVE-2009-0029] System call wrappers part 32
  [CVE-2009-0029] System call wrappers part 31
  [CVE-2009-0029] System call wrappers part 30
  [CVE-2009-0029] System call wrappers part 29
  [CVE-2009-0029] System call wrappers part 28
  [CVE-2009-0029] System call wrappers part 27
  [CVE-2009-0029] System call wrappers part 26
  [CVE-2009-0029] System call wrappers part 25
  [CVE-2009-0029] System call wrappers part 24
  [CVE-2009-0029] System call wrappers part 23
  [CVE-2009-0029] System call wrappers part 22
  [CVE-2009-0029] System call wrappers part 21
  [CVE-2009-0029] System call wrappers part 20
  [CVE-2009-0029] System call wrappers part 19
  [CVE-2009-0029] System call wrappers part 18
  [CVE-2009-0029] System call wrappers part 17
  [CVE-2009-0029] System call wrappers part 16
  [CVE-2009-0029] System call wrappers part 15
  ...
2009-01-14 19:58:40 -08:00
Harvey Harrison 74d96f0186 byteorder: make swab.h include asm/swab.h like a regular header
Add swab.h to kbuild.asm and remove the individual entries from
each arch, mark as unifdef as some arches have some kernel-only
bits inside.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14 19:56:50 -08:00
Heiko Carstens e55380edf6 [CVE-2009-0029] Rename old_readdir to sys_old_readdir
This way it matches the generic system call name convention.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:15 +01:00
Ingo Molnar fe333321e2 powerpc: Change u64/s64 to a long long integer type
Convert arch/powerpc/ over to long long based u64:

 -#ifdef __powerpc64__
 -# include <asm-generic/int-l64.h>
 -#else
 -# include <asm-generic/int-ll64.h>
 -#endif
 +#include <asm-generic/int-ll64.h>

This will avoid reoccuring spurious warnings in core kernel code that
comes when people test on their own hardware. (i.e. x86 in ~98% of the
cases) This is what x86 uses and it generally helps keep 64-bit code
32-bit clean too.

[Adjusted to not impact user mode (from paulus) - sfr]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-13 14:47:59 +11:00
Benjamin Herrenschmidt 30aae739a9 Merge commit 'kumar/kumar-next' into next 2009-01-13 13:59:03 +11:00
Linus Torvalds 4ce5f24193 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile: (31 commits)
  powerpc/oprofile: fix whitespaces in op_model_cell.c
  powerpc/oprofile: IBM CELL: add SPU event profiling support
  powerpc/oprofile: fix cell/pr_util.h
  powerpc/oprofile: IBM CELL: cleanup and restructuring
  oprofile: make new cpu buffer functions part of the api
  oprofile: remove #ifdef CONFIG_OPROFILE_IBS in non-ibs code
  ring_buffer: fix ring_buffer_event_length()
  oprofile: use new data sample format for ibs
  oprofile: add op_cpu_buffer_get_data()
  oprofile: add op_cpu_buffer_add_data()
  oprofile: rework implementation of cpu buffer events
  oprofile: modify op_cpu_buffer_read_entry()
  oprofile: add op_cpu_buffer_write_reserve()
  oprofile: rename variables in add_ibs_begin()
  oprofile: rename add_sample() in cpu_buffer.c
  oprofile: rename variable ibs_allowed to has_ibs in op_model_amd.c
  oprofile: making add_sample_entry() inline
  oprofile: remove backtrace code for ibs
  oprofile: remove unused ibs macro
  oprofile: remove unused components in struct oprofile_cpu_buffer
  ...
2009-01-09 12:43:06 -08:00
Carl Love 883823291d powerpc/oprofile: IBM CELL: add SPU event profiling support
This patch adds the SPU event based profiling funcitonality for the
IBM Cell processor.  Previously, the CELL OProfile kernel code supported
PPU event, PPU cycle profiling and SPU cycle profiling.   The addition of
SPU event profiling allows the users to identify where in their SPU code
various SPU evnets are occuring.  This should help users further identify
issues with their code.  Note, SPU profiling has some limitations due to HW
constraints.  Only one event at a time can be used for profiling and SPU event
profiling must be time sliced across all of the SPUs in a node.

The patch adds a new arch specific file to the OProfile file system. The
file has bit 0 set to indicate that the kernel supports SPU event profiling.
The user tool must check this file/bit to make sure the kernel supports
SPU event profiling before trying to do SPU event profiling.  The user tool
check is part of the user tool patch for SPU event profiling.

Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-01-08 15:51:55 +01:00
Anton Vorontsov 02af87a742 powerpc/kdump: Use ppc_save_regs() in crash_setup_regs()
The patch replaces internal registers dump implementation with
ppc_save_regs(). From now on PPC64 and PPC32 are using the same
code for crash_setup_regs().

NOTE: The old regs dump implementation was capturing SP (r1) directly
as is, so you could see crash_kexec() function on top of the back-trace.
But ppc_save_regs() goes up one stack frame, so you'll not see it
anymore, at the top-level you'll see who actually triggered the crash
dump instead.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08 16:25:17 +11:00
Geert Uytterhoeven 0a2d15b928 mtd/ps3vram: Add modalias support to the ps3vram driver
Update ps3vram driver to use the new ps3 three id modalias support.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08 16:25:14 +11:00
Jim Paris cffb4add03 mtd/ps3vram: Add ps3vram driver for accessing video RAM as MTD
Add ps3vram driver, which exposes unused video RAM on the PS3 as a MTD
device suitable for storage or swap.  Fast data transfer is achieved
using a local cache in system RAM and DMA transfers via the GPU.

Signed-off-by: Vivien Chappelier <vivien.chappelier@free.fr>
Signed-off-by: Jim Paris <jim@jtan.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08 16:25:14 +11:00
Stephen Rothwell ee418b8646 powerpc/cell: Bitops work on unsigned longs
So change the flags member of struct spu from u64 to unsigned long.
This change will also prevent some warnings when we change u64 to unsigned
long long.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08 16:25:12 +11:00
Matthias Fuchs d50701781a powerpc: Add ioctls for RS485 mode control of serial drivers
These ioctls take a struct serial_rs485
(see linux/serial.h) as argument. They are already available
on x86. This patch adds them for the powerpc architecture.

Signed-off-by: Matthias Fuchs <mfuchs@ma-fu.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08 16:25:12 +11:00
Benjamin Herrenschmidt 24f030175d Merge commit 'origin/master' into next 2009-01-08 16:24:38 +11:00
Timur Tabi fdd4e8152f powerpc/qe: add Ethernet UPSMR definitions to QE library
Add the UCC_GETH_UPSMR_xxx definitions to qe.h.  The ucc_geth driver will
eventually use these instead of the UPSMR_ macros it currently defines.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-07 09:18:53 -06:00
Harvey Harrison 156ca2bbf6 powerpc: introduce asm/swab.h
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 18:10:27 -08:00
Matthew Wilcox ea43546750 atomic_t: unify all arch definitions
The atomic_t type cannot currently be used in some header files because it
would create an include loop with asm/atomic.h.  Move the type definition
to linux/types.h to break the loop.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:10 -08:00
Mel Gorman 3340289ddf mm: report the MMU pagesize in /proc/pid/smaps
The KernelPageSize entry in /proc/pid/smaps is the pagesize used by the
kernel to back a VMA.  This matches the size used by the MMU in the
majority of cases.  However, one counter-example occurs on PPC64 kernels
whereby a kernel using 64K as a base pagesize may still use 4K pages for
the MMU on older processor.  To distinguish, this patch reports
MMUPageSize as the pagesize used by the MMU in /proc/pid/smaps.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: "KOSAKI Motohiro" <kosaki.motohiro@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:58:58 -08:00
Benjamin Herrenschmidt 4aa12f7b92 Merge commit 'kumar/kumar-next' into next 2009-01-05 14:16:48 +11:00
Linus Torvalds 7d3b56ba37 Merge branch 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits)
  x86: setup_per_cpu_areas() cleanup
  cpumask: fix compile error when CONFIG_NR_CPUS is not defined
  cpumask: use alloc_cpumask_var_node where appropriate
  cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
  x86: use cpumask_var_t in acpi/boot.c
  x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids
  sched: put back some stack hog changes that were undone in kernel/sched.c
  x86: enable cpus display of kernel_max and offlined cpus
  ia64: cpumask fix for is_affinity_mask_valid()
  cpumask: convert RCU implementations, fix
  xtensa: define __fls
  mn10300: define __fls
  m32r: define __fls
  h8300: define __fls
  frv: define __fls
  cris: define __fls
  cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
  cpumask: zero extra bits in alloc_cpumask_var_node
  cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/
  cpumask: convert mm/
  ...
2009-01-03 12:04:39 -08:00
Mike Travis 7eb1955336 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask
Conflicts:
	arch/x86/kernel/io_apic.c
	kernel/rcuclassic.c
	kernel/sched.c
	kernel/time/tick-sched.c

Signed-off-by: Mike Travis <travis@sgi.com>
[ mingo@elte.hu: backmerged typo fix for io_apic.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03 18:53:31 +01:00
Linus Torvalds b840d79631 Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
  x86: export vector_used_by_percpu_irq
  x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
  sched: nominate preferred wakeup cpu, fix
  x86: fix lguest used_vectors breakage, -v2
  x86: fix warning in arch/x86/kernel/io_apic.c
  sched: fix warning in kernel/sched.c
  sched: move test_sd_parent() to an SMP section of sched.h
  sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
  sched: activate active load balancing in new idle cpus
  sched: bias task wakeups to preferred semi-idle packages
  sched: nominate preferred wakeup cpu
  sched: favour lower logical cpu number for sched_mc balance
  sched: framework for sched_mc/smt_power_savings=N
  sched: convert BALANCE_FOR_xx_POWER to inline functions
  x86: use possible_cpus=NUM to extend the possible cpus allowed
  x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
  x86: update io_apic.c to the new cpumask code
  x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
  x86: xen: use smp_call_function_many()
  x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
  ...

Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02 11:44:09 -08:00
Rusty Russell 9150641dd1 cpumask: Introduce topology_core_cpumask()/topology_thread_cpumask(): powerpc
Impact: New API

The old topology_core_siblings() and topology_thread_siblings() return
a cpumask_t; these new ones return a (const) struct cpumask *.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-01 10:12:21 +10:30
Hollis Blanchard 7b7015914b KVM: ppc: mostly cosmetic updates to the exit timing accounting code
The only significant changes were to kvmppc_exit_timing_write() and
kvmppc_exit_timing_show(), both of which were dramatically simplified.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:41 +02:00
Hollis Blanchard 73e75b416f KVM: ppc: Implement in-kernel exit timing statistics
Existing KVM statistics are either just counters (kvm_stat) reported for
KVM generally or trace based aproaches like kvm_trace.
For KVM on powerpc we had the need to track the timings of the different exit
types. While this could be achieved parsing data created with a kvm_trace
extension this adds too much overhead (at least on embedded PowerPC) slowing
down the workloads we wanted to measure.

Therefore this patch adds a in-kernel exit timing statistic to the powerpc kvm
code. These statistic is available per vm&vcpu under the kvm debugfs directory.
As this statistic is low, but still some overhead it can be enabled via a
.config entry and should be off by default.

Since this patch touched all powerpc kvm_stat code anyway this code is now
merged and simplified together with the exit timing statistic code (still
working with exit timing disabled in .config).

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:41 +02:00
Hollis Blanchard c5fbdffbda KVM: ppc: save and restore guest mappings on context switch
Store shadow TLB entries in memory, but only use it on host context switch
(instead of every guest entry). This improves performance for most workloads on
440 by reducing the guest TLB miss rate.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:09 +02:00
Hollis Blanchard 7924bd4109 KVM: ppc: directly insert shadow mappings into the hardware TLB
Formerly, we used to maintain a per-vcpu shadow TLB and on every entry to the
guest would load this array into the hardware TLB. This consumed 1280 bytes of
memory (64 entries of 16 bytes plus a struct page pointer each), and also
required some assembly to loop over the array on every entry.

Instead of saving a copy in memory, we can just store shadow mappings directly
into the hardware TLB, accepting that the host kernel will clobber these as
part of the normal 440 TLB round robin. When we do that we need less than half
the memory, and we have decreased the exit handling time for all guest exits,
at the cost of increased number of TLB misses because the host overwrites some
guest entries.

These savings will be increased on processors with larger TLBs or which
implement intelligent flush instructions like tlbivax (which will avoid the
need to walk arrays in software).

In addition to that and to the code simplification, we have a greater chance of
leaving other host userspace mappings in the TLB, instead of forcing all
subsequent tasks to re-fault all their mappings.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:09 +02:00
Hollis Blanchard c0ca609c5f powerpc/44x: declare tlb_44x_index for use in C code
KVM currently ignores the host's round robin TLB eviction selection, instead
maintaining its own TLB state and its own round robin index. However, by
participating in the normal 44x TLB selection, we can drop the alternate TLB
processing in KVM. This results in a significant performance improvement,
since that processing currently must be done on *every* guest exit.

Accordingly, KVM needs to be able to access and increment tlb_44x_index.
(KVM on 440 cannot be a module, so there is no need to export this symbol.)

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:09 +02:00
Hollis Blanchard 891686188f KVM: ppc: support large host pages
KVM on 440 has always been able to handle large guest mappings with 4K host
pages -- we must, since the guest kernel uses 256MB mappings.

This patch makes KVM work when the host has large pages too (tested with 64K).

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:07 +02:00
Hollis Blanchard fe4e771d5c KVM: ppc: fix userspace mapping invalidation on context switch
We used to defer invalidating userspace TLB entries until jumping out of the
kernel. This was causing MMU weirdness most easily triggered by using a pipe in
the guest, e.g. "dmesg | tail". I believe the problem was that after the guest
kernel changed the PID (part of context switch), the old process's mappings
were still present, and so copy_to_user() on the "return to new process" path
ended up using stale mappings.

Testing with large pages (64K) exposed the problem, probably because with 4K
pages, pressure on the TLB faulted all process A's mappings out before the
guest kernel could insert any for process B.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:52:26 +02:00
Hollis Blanchard d4cf3892e5 KVM: ppc: optimize irq delivery path
In kvmppc_deliver_interrupt is just one case left in the switch and it is a
rare one (less than 8%) when looking at the exit numbers. Therefore we can
at least drop the switch/case and if an if. I inserted an unlikely too, but
that's open for discussion.

In kvmppc_can_deliver_interrupt all frequent cases are in the default case.
I know compilers are smart but we can make it easier for them. By writing
down all options and removing the default case combined with the fact that
ithe values are constants 0..15 should allow the compiler to write an easy
jump table.
Modifying kvmppc_can_deliver_interrupt pointed me to the fact that gcc seems
to be unable to reduce priority_exception[x] to a build time constant.
Therefore I changed the usage of the translation arrays in the interrupt
delivery path completely. It is now using priority without translation to irq
on the full irq delivery path.
To be able to do that ivpr regs are stored by their priority now.

Additionally the decision made in kvmppc_can_deliver_interrupt is already
sufficient to get the value of interrupt_msr_mask[x]. Therefore we can replace
the 16x4byte array used here with a single 4byte variable (might still be one
miss, but the chance to find this in cache should be better than the right
entry of the whole array).

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:52:23 +02:00
Hollis Blanchard 5cf8ca2214 KVM: ppc: adjust vcpu types to support 64-bit cores
However, some of these fields could be split into separate per-core structures
in the future.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:52:22 +02:00
Hollis Blanchard db93f5745d KVM: ppc: create struct kvm_vcpu_44x and introduce container_of() accessor
This patch doesn't yet move all 44x-specific data into the new structure, but
is the first step down that path. In the future we may also want to create a
struct kvm_vcpu_booke.

Based on patch from Liu Yu <yu.liu@freescale.com>.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:52:22 +02:00
Hollis Blanchard 5cbb5106f5 KVM: ppc: Move the last bits of 44x code out of booke.c
Needed to port to other Book E processors.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:52:22 +02:00
Hollis Blanchard 75f74f0dbe KVM: ppc: refactor instruction emulation into generic and core-specific pieces
Cores provide 3 emulation hooks, implemented for example in the new
4xx_emulate.c:
kvmppc_core_emulate_op
kvmppc_core_emulate_mtspr
kvmppc_core_emulate_mfspr

Strictly speaking the last two aren't necessary, but provide for more
informative error reporting ("unknown SPR").

Long term I'd like to have instruction decoding autogenerated from tables of
opcodes, and that way we could aggregate universal, Book E, and core-specific
instructions more easily and without redundant switch statements.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:52:21 +02:00
Hollis Blanchard c381a04313 ppc: Create disassemble.h to extract instruction fields
This is used in a couple places in KVM, but isn't KVM-specific.

However, this patch doesn't modify other in-kernel emulation code:
- xmon uses a direct copy of ppc_opc.c from binutils
- emulate_instruction() doesn't need it because it can use a series
  of mask tests.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:52:21 +02:00