Commit Graph

117 Commits

Author SHA1 Message Date
Sarah Sharp a9e758634f USB: Fix up URB error codes to reflect implementation.
Documentation/usb/error-codes.txt mentions that urb->status can be set to
-EXDEV, if the isochronous transfer was not fully completed.  However, in
practice, EHCI, UHCI, and OHCI all only set -EXDEV in the individual frame
status, never in the URB status.  Those host controller actually always
pass in a zero status to usb_hcd_giveback_urb, and rely on the core to set
the appropriate status value.

The xHCI driver ran into issues with the uvcvideo driver when it tried to
set -EXDEV in urb->status, because the driver refused to submit URBs, and
the userspace camera application's video froze.

Clean up the documentation to reflect the actual implementation.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2011-06-17 11:28:21 -07:00
Linus Torvalds c44dead70a Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits)
  USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h
  USB: UHCI: Support big endian GRUSBHC HC
  sparc: add {read,write}*_be routines
  USB: UHCI: Add support for big endian descriptors
  USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier
  USB: UHCI: Add support for big endian mmio
  usb-storage: Correct adjust_quirks to include latest flags
  usb/isp1760: Fix possible unlink problems
  usb/isp1760: Move function isp1760_endpoint_disable() within file.
  USB: remove remaining usages of hcd->state from usbcore and fix regression
  usb: musb: ux500: add configuration and build options for ux500 dma
  usb: musb: ux500: add dma glue layer for ux500
  usb: musb: ux500: add dma name for ux500
  usb: musb: ux500: add ux500 specific code for gadget side
  usb: musb: fix compile error
  usb-storage: fix up the unusual_realtek device list
  USB: gadget: f_audio: Fix invalid dereference of initdata
  EHCI: don't rescan interrupt QHs needlessly
  OHCI: fix regression caused by nVidia shutdown workaround
  USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage
  ...
2011-05-23 12:33:02 -07:00
Alan Stern 6498d9db6d USB: documentation update for the pre_reset method
This patch (as1459) updates the documentation for the pre_reset method
in struct usb_driver.  When a driver is notified of an impending
reset, it must cancel all outstanding I/O and not start any new I/O
until it has been notified that the reset is complete.

As far as I know, most existing drivers that implement pre_reset do
this now.  The major exceptions appear to be the SpeedTouch and
CDC-WDM drivers.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:29 -07:00
Michal Nazarewicz 7701846fd5 USB: gadget: g_multi: fixed vendor and product ID in inf files
Commit 1c6529e92b "USB: gadget: g_multi: fixed vendor and
product ID" replaced g_multi's vendor and product ID with
proper ID's from Linux Foundation.  This commit now updates
INF files in the Documentation/usb directory which were
omitted in the original commit.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 16:45:22 -07:00
Alan Ott 1a978c50c6 HID: Move hiddev.txt to the new Documentation/hid directory
With the new Documentation/hid directory, it makes sense to have
hiddev.txt here as well.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-22 11:43:51 +01:00
Pete Zaitcev d25bc4db72 USB: usbmon: fix-up docs and text API for sparse ISO
This is based on a patch that Alan Stern wrote. It did the same simple
thing in both text and binary cases. In the same time, Marton and I
fixed the binary side properly, but this leaves the text to be fixed.
It is not very important due to low maxium data size of text, but
let's add it just for extra correctness.

The pseudocode is too much to keep fixed up, and we have real code
to be used as examples now, so let's drop it too.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04 11:46:57 -08:00
Alan Stern fcc4a01eb8 USB: use the runtime-PM autosuspend implementation
This patch (as1428) converts USB over to the new runtime-PM core
autosuspend framework.  One slightly awkward aspect of the conversion
is that USB devices will now have two suspend-delay attributes: the
old power/autosuspend file and the new power/autosuspend_delay_ms
file.  One expresses the delay time in seconds and the other in
milliseconds, but otherwise they do the same thing.  The old attribute
can be deprecated and then removed eventually.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16 14:03:41 -08:00
Alan Stern 834e2312e7 USB: teach "devices" file about Wireless and SuperSpeed USB
The /sys/kernel/debug/usb/devices file doesn't know about Wireless or
SuperSpeed USB.  This patch (as1416b) teaches it, and updates the
Documentation/usb/proc_sub_info.txt file accordingly.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Vrabel <david.vrabel@csr.com>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:21:40 -07:00
Michal Nazarewicz c7ba692294 USB: gadget: g_multi: added documentation and INF files
A short documentation of the g_multi driver along with INF
files for Windows XP SP3 are provided.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 14:35:37 -07:00
Michal Nazarewicz e41e134e34 USB: gadget: g_serial: INF file updated
Updated the INF file for g_serial gadget.  It should work with
most recent Windows systems now.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 14:35:37 -07:00
Michal Nazarewicz 90eef5b8ac USB: gadget: g_ether: updated INF file
Updated the INF file for the g_ether gadget.  It should work with most
recent Windows systems now.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 14:35:36 -07:00
Andrea Gelmini e9c64f2b39 USB: Documentation/usb/linux.inf: Checkpatch cleanup
Documentation/usb/linux.inf:66: ERROR: trailing whitespace
Documentation/usb/linux.inf:67: ERROR: trailing whitespace
Documentation/usb/linux.inf:98: ERROR: trailing whitespace
Documentation/usb/linux.inf:99: ERROR: trailing whitespace
Documentation/usb/linux.inf:115: ERROR: trailing whitespace
Documentation/usb/linux.inf:116: ERROR: trailing whitespace
Documentation/usb/linux.inf:120: ERROR: trailing whitespace
Documentation/usb/linux.inf:121: ERROR: trailing whitespace
Documentation/usb/linux.inf:122: ERROR: trailing whitespace
Documentation/usb/linux.inf:123: ERROR: trailing whitespace
Documentation/usb/linux.inf:144: ERROR: trailing whitespace
Documentation/usb/linux.inf:145: ERROR: trailing whitespace
Documentation/usb/linux.inf:146: ERROR: trailing whitespace
Documentation/usb/linux.inf:147: ERROR: trailing whitespace
Documentation/usb/linux.inf:158: ERROR: trailing whitespace

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 14:35:34 -07:00
Andrea Gelmini b03dbffdcf USB: Documentation/usb/hotplug.txt: Checkpatch cleanup
Documentation/usb/hotplug.txt:13: ERROR: trailing whitespace
Documentation/usb/hotplug.txt:87: ERROR: trailing whitespace

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 14:35:34 -07:00
Andrea Gelmini 254217d1a8 USB: Documentation/usb/ehci.txt: Checkpatch cleanup
Documentation/usb/ehci.txt:12: ERROR: trailing whitespace

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 14:35:34 -07:00
Justin P. Mattock 0ea6e61122 Documentation: update broken web addresses.
Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-04 15:21:40 +02:00
Linus Torvalds 7a9b149212 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits)
  USB: remove unused usb_buffer_alloc and usb_buffer_free macros
  usb: musb: update gfp/slab.h includes
  USB: ftdi_sio: fix legacy SIO-device header
  USB: kl5usb105: reimplement using generic framework
  USB: kl5usb105: minor clean ups
  USB: kl5usb105: fix memory leak
  USB: io_ti: use kfifo to implement write buffering
  USB: io_ti: remove unsused private counter
  USB: ti_usb: use kfifo to implement write buffering
  USB: ir-usb: fix incorrect write-buffer length
  USB: aircable: fix incorrect write-buffer length
  USB: safe_serial: straighten out read processing
  USB: safe_serial: reimplement read using generic framework
  USB: safe_serial: reimplement write using generic framework
  usb-storage: always print quirks
  USB: usb-storage: trivial debug improvements
  USB: oti6858: use port write fifo
  USB: oti6858: use kfifo to implement write buffering
  USB: cypress_m8: use kfifo to implement write buffering
  USB: cypress_m8: remove unused drain define
  ...

Fix up conflicts (due to usb_buffer_alloc/free renaming) in
	drivers/input/tablet/acecad.c
	drivers/input/tablet/kbtab.c
	drivers/input/tablet/wacom_sys.c
	drivers/media/video/gspca/gspca.c
	sound/usb/usbaudio.c
2010-05-20 21:26:12 -07:00
Alan Stern 85bcb5ee88 USB: remove URB_NO_SETUP_DMA_MAP
Now that URB_NO_SETUP_DMA_MAP is no longer in use, this patch (as1376)
removes all references to it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:40 -07:00
Mike Dunn b69578df7e USB: usbserial: mos7720: add support for parallel port on moschip 7715
Add support for the parallel port on the moschip MCS7715 device.  The port
registers itself with the parport subsystem as a low-level driver.  A separate
entry to the kernel configuration is added beneath that for the mos7720, to
avoid the need to link with the parport subsystem code for users who don't have
or don't want the parallel port.  Only compatibility mode is currently supported
(no ECP/EPP).  Tested with both moschip devices (7720 and 7715) on UP and SMP
hosts, including regression testing of serial port, concurrent operation of
serial and parallel ports, and various connect / disconnect scenarios.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:39 -07:00
Daniel Mack 997ea58eb9 USB: rename usb_buffer_alloc() and usb_buffer_free() users
For more clearance what the functions actually do,

  usb_buffer_alloc() is renamed to usb_alloc_coherent()
  usb_buffer_free()  is renamed to usb_free_coherent()

They should only be used in code which really needs DMA coherency.

All call sites have been changed accordingly, except for staging
drivers.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Pedro Ribeiro <pedrib@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:38 -07:00
Eric Raymond 48679c6d77 USB: Short new 'graph for usb-serial.txt
Documentation update


Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:38 -07:00
Sarah Sharp eab1cafc3b USB: Support for allocating USB 3.0 streams.
Bulk endpoint streams were added in the USB 3.0 specification.  Streams
allow a device driver to overload a bulk endpoint so that multiple
transfers can be queued at once.

The device then decides which transfer it wants to work on first, and can
queue part of a transfer before it switches to a new stream.  All this
switching is invisible to the device driver, which just gets a completion
for the URB.  Drivers that use streams must be able to handle URBs
completing in a different order than they were submitted to the endpoint.

This requires adding new API to set up xHCI data structures to support
multiple queues ("stream rings") per endpoint.  Drivers will allocate a
number of stream IDs before enqueueing URBs to the bulk endpoints of the
device, and free the stream IDs in their disconnect function.  See
Documentation/usb/bulk-streams.txt for details.

The new mass storage device class, USB Attached SCSI Protocol (UASP), uses
these streams API.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:38 -07:00
Alan Stern a90309860b USB: deprecate the power/level sysfs attribute
This patch (as1367) deprecates USB's power/level sysfs attribute in
favor of the power/control attribute provided by the runtime PM core.
The two attributes do the same thing.

It would be nice to replace power/level with a symlink to
power/control, but at the moment sysfs doesn't offer any way to do so.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:37 -07:00
Fabien Chouteau 71adf11894 USB: gadget: add HID gadget driver
g_hid is a USB gadget driver implementing the Human Interface Device class
specification. The driver handles basic HID protocol handling in the
kernel, and allows userspace to read/write HID reports trough /dev/hidgX
character devices.

Signed-off-by: Fabien Chouteau <fabien.chouteau@barco.com>
Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:35 -07:00
Francis Galiegue a33f32244d Documentation/: it's -> its where appropriate
Fix obvious cases of "it's" being used when "its" was meant.

Signed-off-by: Francis Galiegue <fgaliegue@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-23 02:09:52 +02:00
Alan Stern 9bbdf1e0af USB: convert to the runtime PM framework
This patch (as1329) converts the USB stack over to the PM core's
runtime PM framework.  This involves numerous changes throughout
usbcore, especially to hub.c and driver.c.  Perhaps the most notable
change is that CONFIG_USB_SUSPEND now depends on CONFIG_PM_RUNTIME
instead of CONFIG_PM.

Several fields in the usb_device and usb_interface structures are no
longer needed.  Some code which used to depend on CONFIG_USB_PM now
depends on CONFIG_USB_SUSPEND (requiring some rearrangement of header
files).

The only visible change in behavior should be that following a system
sleep (resume from RAM or resume from hibernation), autosuspended USB
devices will be resumed just like everything else.  They won't remain
suspended.  But if they aren't in use then they will naturally
autosuspend again in a few seconds.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:12 -08:00
Alan Stern 088f7fec8a USB: implement usb_enable_autosuspend
This patch (as1326) adds usb_enable_autosuspend() and
usb_disable_autosuspend() routines for use by drivers.  If a driver
knows that its device can handle suspends and resumes correctly, it
can enable autosuspend all by itself.  This is equivalent to the user
writing "auto" to the device's power/level attribute.

The implementation differs slightly from what it used to be.  Now
autosuspend is disabled simply by doing usb_autoresume_device() (to
increment the usage counter) and enabled by doing
usb_autosuspend_device() (to decrement the usage counter).

The set_level() attribute method is updated to use the new routines,
and the USB Power-Management documentation is updated.

The patch adds a usb_enable_autosuspend() call to the hub driver's
probe routine, allowing the special-case code for hubs in quirks.c to
be removed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:10 -08:00
Alan Stern f661c6f8c6 USB: check the endpoint type against the pipe type
This patch (as1316) adds some error checking to usb_submit_urb().
It's conditional on CONFIG_USB_DEBUG, so it won't affect normal users.
The new check makes sure that the actual type of the endpoint
described by urb->pipe agrees with the type encoded in the pipe value.

The USB error code documentation is updated to include the code
returned by the new check, and the usbfs SUBMITURB handler is updated
to use the correct pipe type when legacy user code tries to submit a
bulk transfer to an interrupt endpoint.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:53:07 -08:00
Alan Stern baf67741bf USB: power management documentation update
This patch (as1313) updates the documentation concerning USB power
management.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:34:09 -08:00
Alan Stern 8e4ceb38eb USB: prepare for changover to Runtime PM framework
This patch (as1303) revises the USB Power Management infrastructure to
make it compatible with the new driver-model Runtime PM framework:

	Drivers are no longer allowed to access intf->pm_usage_cnt
	directly; the PM framework manages its own usage counters.

	usb_autopm_set_interface() is eliminated, because it directly
	sets intf->pm_usage_cnt.

	usb_autopm_enable() and usb_autopm_disable() are eliminated,
	because they call usb_autopm_set_interface().

	usb_autopm_get_interface_no_resume() and
	usb_autopm_put_interface_no_suspend() are added.  They
	correspond to pm_runtime_get_noresume() and
	pm_runtime_put_noidle() in the PM framework.

	The power/level attribute no longer accepts "suspend", only
	"on" and "auto".  The PM framework doesn't allow devices to be
	forced into a suspended mode.

The hub driver contains the only code that violates the new
guidelines.  It is updated to use the new interface routines instead.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:25 -08:00
Alan Stern fb34d53752 USB: remove the auto_pm flag
This patch (as1302) removes the auto_pm flag from struct usb_device.
The flag's only purpose was to distinguish between autosuspends and
external suspends, but that information is now available in the
pm_message_t argument passed to suspend methods.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:21 -08:00
Jean Delvare a87371b477 USB: Fix sysfs paths in documentation
Neither /sys/usb/devices nor /sys/bus/devices exist. The correct path
is /sys/bus/usb/devices.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:41 -07:00
Rogério Brito f0cc82a831 USB: fix paths in usbmon documentation
Hi there.

On Aug 21 2009, Alan Stern wrote:
> On Thu, 20 Aug 2009, Rogério Brito wrote:
> > Again, just reiterating, what I said before, even though I am not sure
> > if I can reproduce it, I will try to.
> 
> A usbmon trace showing what happens when you plug in the drive and 
> when you run smartctl would help.

The documentation for usbmon in the kernel 2.6.31-rc7 kernel doesn't
match what the kernel exposes in the debug fs tree. This patch fixes it.

Signed-off-by: Rogério Brito <rbrito@ime.usp.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:37 -07:00
Pete Zaitcev f4e2332cfc USB: usbmon: touch up the documentation
I think this sentence was confusing regarding the possible size
of the data area.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:19 -07:00
Németh Márton 6e22168954 trivial: usb: fix missing space typo in doc
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:51 +02:00
Matt LaPlante 19f5946001 trivial: Miscellaneous documentation typo fixes
Fix various typos in documentation txts.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:47 +02:00
Pete Zaitcev 471c604daf USB: usbmon: Add binary API v1
This patch adds an extension to the binary API so it reaches parity with
existing text API (so-called "1u"). The extension delivers additional data,
such as ISO descriptors and the interrupt interval.

Signed-Off-By: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:36 -07:00
Randy Dunlap 5872fb94f8 Documentation: move DMA-mapping.txt to Doc/PCI/
Move DMA-mapping.txt to Documentation/PCI/.

DMA-mapping.txt was supposed to be moved from Documentation/ to
Documentation/PCI/.  The 00-INDEX files in those two directories
were updated, along with a few other text files, but the file
itself somehow escaped being moved, so move it and update more
text files and source files with its new location.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
cc:	Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-29 18:19:29 -08:00
Alan Stern 9ac39f28b5 USB: add asynchronous autosuspend/autoresume support
This patch (as1160b) adds support routines for asynchronous autosuspend
and autoresume, with accompanying documentation updates.  There
already are several potential users of this interface, and others are
likely to arise as autosuspend support becomes more widespread.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 09:59:53 -08:00
David Vrabel b21a207141 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream
Conflicts:

	drivers/uwb/wlp/eda.c
2009-01-02 13:17:13 +00:00
Phil Endecott 9a9fafb894 USB: fix comment about endianness of descriptors
This patch fixes a comment and clarifies the documentation about the
endianness of descriptors. The current policy is that descriptors will
be little-endian at the API even on big-endian systems; however the
/proc/bus/usb API predates this policy and presents descriptors with
some multibyte fields byte-swapped.

Signed-off-by: Phil Endecott <usb_endian_patch@chezphil.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17 10:49:14 -08:00
Peter Korsgaard c33ba39214 USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour
Commit 7bb5ea54 (usb gadget serial: use composite gadget framework)
changed the default for the use_acm parameter from 0 to 1.
Update the documentation to match.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17 10:49:13 -08:00
Pete Zaitcev aacf4a0135 usbmon: drop bogus 0t from usbmon.txt
The example is incorrect: there is no 0t socket (the '1t' format has no
bus number in it). Also, correct the broken sentence for USB Tag.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17 10:49:12 -08:00
David Vrabel 6fae35f9ce uwb: add basic radio manager
The UWB radio manager coordinates the use of the radio between the
PALs that may be using it.  PALs request use of the radio with
uwb_radio_start() and the radio manager will start beaconing if its
not already doing so.  When the last PAL has called uwb_radio_stop()
beaconing will be stopped.

In the future, the radio manager will have a more sophisticated channel
selection algorithm, probably following the Channel Selection Policy
from the WiMedia Alliance when it is finalized.  For now, channel 9
(BG1, TFC1) is selected.

The user may override the channel selected by the radio manager and may
force the radio to stop beaconing.

The WUSB Host Controller PAL makes use of this and there are two new
debug PAL commands that can be used for testing.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-11-19 14:46:33 +00:00
David Vrabel 61e0e79ee3 Merge branch 'master' into for-upstream
Conflicts:

	Documentation/ABI/testing/sysfs-bus-usb
	drivers/Makefile
2008-10-20 16:07:19 +01:00
Geoff Levand 81ab5b8ee6 USB: Fix doc for usb_autopm_enable
Correct errors in the descriptions for usb_autopm_enable
and usb_autopm_disable in the USB PM doc.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:40:56 -07:00
Oliver Neukum d1b1944085 USB: Documentation/usb/anchors.txt #2
This adds Documentation for the extensions of the anchor API.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:40:54 -07:00
Harrison Metzger eb86be5424 USB: Added driver for a Delcom USB 7-segment LED Display
Added basic support for a Delcom USB 7-segment LED Display

Signed-off by: Harrison Metzger <harrisonmetz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:40:51 -07:00
David Vrabel 99ee3a6d45 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb into for-upstream 2008-10-10 11:47:31 +01:00
Oliver Neukum 697e04db56 USB: update of Documentation/usb/anchors.txt
The extended anchor API is documented

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23 13:58:07 -07:00
Felipe Zimmerle f1fa035f2b wusb: wusb-cbaf (CBA driver) sysfs ABI simplification
Simplify the sysfs ABI of the wusb-cbaf (Cable Based Association)
driver: use one value per file and cause the write of the CHID to
fetch the CDID (instead of requiring a separate read).

Update the example wusb-cbaf script to work with this revised ABI.

Signed-off-by: Felipe Zimmerle <felipe.zimmerle@indt.org.br>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:35 +01:00