Commit Graph

2667 Commits

Author SHA1 Message Date
Ping Cheng f4fa9a6d80 Input: wacom - lower the LED luminance
The LED luminance level is normally lower when no button is pressed.

Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05 00:26:00 -07:00
Jason Gerecke d6069dae47 Input: wacom - revert "Cintiq 21UX2 does not have menu strips"
This reverts commit 71c86ce597.
The 21UX2 does have touchstrips, but they are in a somewhat-
hidden location.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-04 22:54:05 -07:00
Sebastian Andrzej Siewior f01536e3d6 Input: add a driver for TSC-40 serial touchscreen
This patch adds the TSC-40 serial touchscreen driver and should be
compatible with TSC-10 and TSC-25.

The driver was written by Linutronix on behalf of Bachmann electronic GmbH.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-28 10:24:14 -07:00
Paul Bolle 395cf9691d doc: fix broken references
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27 18:08:04 +02:00
Anssi Hannula 9688efda3f [media] move ati_remote driver from input/misc to media/rc
The driver will be migrated to the RC driver API in a following
commit.

[mchehab@redhat.com: Fix some bad whitespacing]
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-22 10:47:41 -03:00
Tobias Klauser cca84699a0 Input: gpio_keys - use of_property_read_u32()
Use the of_property_read_u32() helper function to retrieve u32 values
from the device tree. Also do not pass the len parameter to
of_get_property if it isn't checked afterwards.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:32 -07:00
Dmitry Torokhov c3a01ba9e4 Input: penmount - simplify unregister procedure
Since touchscreen driver does not handle any events to be sent to the
device we can close serio port first and then unregister the input device.

Tested-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:31 -07:00
Dmitry Torokhov 98b013eb7a Input: penmount - rework handling of different protocols
Instead of having one large switch based on product ID use pointer to
function actually doing protocol decoding.

Tested-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:30 -07:00
John Sung bd8f6d2ed4 Input: penmount - add PenMount 6250 support
Add multi touch support for PenMount 6250 touch controller.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:30 -07:00
John Sung 90aba7d8b1 Input: penmount - add PenMount 3000 support
Add dual touch support for PenMount 3000 touch controller.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:29 -07:00
John Sung c42e2e406a Input: penmount - add PenMount 6000 support
Add support for PenMount 6000 touch controller.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:29 -07:00
John Sung 21ae508bab Input: penmount - fix the protocol
The MSB and LSB of the XY axis value are switched according to the PenMount 9000 protocol. The driver name is also changed from penmountlpc, since it is not for LPC interface at all.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:28 -07:00
JJ Ding 4af61e9027 Input: elantech - remove module parameter force_elantech
This essentially reverts commit f81bc788ff.

With recent work on elantech driver, I believe we now have complete support
for all elantech touchpads. So remove this hack.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:28 -07:00
JJ Ding 84a90b610a Input: elantech - better support all those v2 variants
V2 hardware has many variants. This patch adddresses two issues:

 - some model also has debounce packets, but with a different signature
   than v3. Now we just check debounce for all v2 hardware.

 - due to different scanning methods the hardware uses, x and y ranges have
   to be calculated differently. And for some specific versions, we can just
   see them as custom-made, so set {x, y} the same values as Windows driver
   does.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Tested-by: Richard Schütz <r.schtz@t-online.de>
Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:27 -07:00
Peter Ujfalusi 7e968985cb Input: twl6040-vibra: Use accessor to get revision information
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-19 23:15:47 +01:00
Linus Torvalds 279b1e0fd9 Merge branch 'for-linus' of git://github.com/dtor/input
* 'for-linus' of git://github.com/dtor/input:
  Input: wacom - fix touch parsing on newer Bamboos
  Input: bcm5974 - add MacBookAir4,1 trackpad support
  Input: wacom - add POINTER and DIRECT device properties
  Input: adp5588-keys - remove incorrect modalias
  Input: cm109 - fix checking return value of usb_control_msg
  Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner
  Input: wacom - remove pressure for touch devices
2011-09-16 14:09:19 -07:00
Chris Bagwell 8f9068609e Input: wacom - fix touch parsing on newer Bamboos
Bamboos with Product ID's > 0xD4 return values unrelated to pressure
in touch 1 pressure field.  They also report 2nd touch X/Y values
shifted down 1 byte (where pressure was).  This results in jumpy
1 finger touch and totally invalid 2nd finger data.

For touch detection, switch to a Touch Present single bit that
all versions of Bamboo support.

For touch 2 offset, calculate offset based on a bit that is set
different between the two packet layouts.

Since touch pressure reports were removed from driver, there was
no need to be reading pressure any more.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-12 22:08:59 -07:00
Pieter-Augustijn Van Malleghem 1c601beaf2 Input: bcm5974 - add MacBookAir4,1 trackpad support
This patch adds trackpad support for the MacBookAir4,1, released in July 2011.
It is very similar to the MacBookAir4,2 patch submitted by Joshua Dillon and
Chase Douglas.

Signed-off-by: Pieter-Augustijn Van Malleghem <p-a@scarlet.be>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 13:32:27 -07:00
JJ Ding 1dc6edec12 Input: elantech - add v4 hardware support
v4 hardware is a true multitouch capable touchpad (up to 5 fingers).
The packet format is quite complex, please see protocol document for
reference.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:35:02 -07:00
JJ Ding 28f4961611 Input: elantech - add v3 hardware support
v3 hardware's packet format is almost identical to v2 (one/three finger touch),
except when sensing two finger touch, the hardware sends 12 bytes of data.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:58 -07:00
JJ Ding 3c8bbb951a Input: elantech - clean up elantech_init
Group property setting code into elantech_set_properties.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:55 -07:00
JJ Ding 7894f21b10 Input: elantech - packet checking for v2 hardware
For v2 hardware, there is no real parity check, but we can still check
some constant bits for data integrity.

Also rename elantech_check_parity_v1 to elantech_packet_check_v1 to make
these packet checking function names consistent.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:50 -07:00
JJ Ding 8a360d09b1 Input: elantech - remove ETP_EDGE_FUZZ_V2
Don't try to be too clever and remove ETP_EDGE_FUZZ_V2. X, Y ranges
should be just the raw resolution of the device. Otherwise, they can
cause underflow on the Y axis.

Suggested-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:40 -07:00
JJ Ding 230282a77b Input: elantech - use firmware provided x, y ranges
With newer hardware, the touchpad provides range info.
Let's use it.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:36 -07:00
JJ Ding 461a791765 Input: elantech - get rid of ETP_2FT_* in elantech.h
For two finger touches the coordinate of each finger gets reported
separately but with reduced resolution.

With this change, we now have the same range for ST and MT data and
scale MT data because it has lower resolution to match ST.

Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:31 -07:00
JJ Ding 1155961946 Input: elantech - correct x, y value range for v2 hardware
x, y values are actually 12-bit long. Also update protocol document to
reflect the change.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:25 -07:00
Randy Dunlap b6b1e927ce Input: twl6040-vibra - fix compiler warning
Fix warning from Geert's build summary emails by changing "if" to
"ifdef". Thsi should fix the following:

drivers/input/misc/twl6040-vibra.c:231:5: warning: "CONFIG_PM_SLEEP" is not defined

Builds cleanly with CONFIG_PM_SLEEP enabled or disabled.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:16:21 -07:00
Dmitry Torokhov 95439cbad1 Input: tegra-kbc - tighten locking
Take spinlock when entering ISR and timer routine to ensure that we do not
race while enabling/disabling FIFO interrupts.

Also we do not need to take teh spinlock in tegra_kbc_startremove() since
interrupt is completely disabled.

Tested-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 09:25:50 -07:00
Rakesh Iyer d0d150ec28 Input: tegra-kbc - fix wakeup from suspend
For wakeup to be reliable, kbc needs to be in interrupt mode before suspend.
Created common routine to control the FIFO interrupt.
Added synchronization to ensure orderly suspend.

Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 09:25:42 -07:00
Harvey Yang 9299c08d8b Input: tc3589x-keypad - fix section mismatch warning
WARNING: drivers/input/keyboard/built-in.o(.text+0xb55b): Section mismatch in reference from the function tc3589x_keypad_open() to the function .devinit.text:tc3589x_keypad_init_key_hardware()
The function tc3589x_keypad_open() references
the function __devinit tc3589x_keypad_init_key_hardware().
This is often because tc3589x_keypad_open lacks a __devinit
annotation or the annotation of tc3589x_keypad_init_key_hardware is wrong.

Signed-off-by: Harvey Yang <harvey.huawei.yang@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-08 09:51:10 -07:00
Jason Gerecke 3512069eef Input: wacom - add POINTER and DIRECT device properties
Adds INPUT_PROP_POINTER or INPUT_PROP_DIRECT as necessary to the
hardware supported by the Wacom driver. The DIRECT property is
assigned to devices with an embedded screen (i.e. touchscreens
and display tablets). The POINTER property is assigned to those
without embedded screens.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-08 09:42:28 -07:00
Yong Zhang ec4665c46b Input: remove IRQF_DISABLED from drivers
This flag is a NOOP and can be removed now.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07 14:19:11 -07:00
Eduard Hasenleithner 5d7e7d4798 Input: wacom - add Intuos4 LED and OLED control
This commit enables control of the LEDs and OLED displays found on the
Wacom Intuos4 M, L, and XL. For this purpose, a new "wacom_led" attribute
group is added to the sysfs entry of the USB device.

This "wacom_led" group only shows up when the correct device (M, L, or XL)
is detected. The attributes are described in
 Documentation/ABI/testing/sysfs-wacom

Signed-off-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07 14:19:01 -07:00
Dmitry Torokhov 7e66eaf14e Merge commit 'v3.1-rc4' into next 2011-09-07 14:18:36 -07:00
Axel Lin 8c67566039 Input: adp5588-keys - remove incorrect modalias
For i2c drivers, we should use "i2c:" prefix for modalias.

MODULE_DEVICE_TABLE will setup the modulalias for us, thus adding
a MODULE_ALIAS is redundant (in addition to being incorrect).

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26 23:40:14 -07:00
Dmitry Torokhov d3654d7ef3 Input: tsc2007 - add open and close methods
This will ensure that the device delivers input events only when there
are users.

Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26 23:25:14 -07:00
Dmitry Torokhov 377dc5538c Input: tsc2007 - convert to threaded IRQ
Instead of using hard IRQ and workqueue solution switch to using threaded
interrupt handler to simplify the code and locking rules.

Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26 23:21:53 -07:00
axel lin 7b727acc41 Input: cm109 - fix checking return value of usb_control_msg
If successful, usb_control_msg returns the number of bytes transferred,
otherwise a negative error number.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26 23:20:30 -07:00
Jason Gerecke 1fab84aa63 Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner
The Wacom PenPartner should advertise its stylus tip and button
in addition to the eraser tool. These are both physically
present on the hardware, and emitted from 'wacom_penpartner_irq'.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26 23:20:21 -07:00
Ping Cheng cfb7d55724 Input: wacom - remove pressure for touch devices
Touch devices do not report valid pressure or capacitance.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26 23:20:12 -07:00
Linus Torvalds 8554cc18db Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ad714x - read the interrupt status registers in a row
  Input: ad714x - use DMA-safe buffers for spi_write()
  Input: ad714x - fix endianness issues
  Input: ad714xx-spi - force SPI bus into the default 8-bit mode
  Input: ep93xx_keypad - add missing include of linux/module.h
  Input: tnetv107x-ts - add missing include of linux/module.h
  Input: max11801_ts - correct license statement
  Input: atmel_mxt_ts - report pressure information from the driver
  Input: bcm5974 - Add support for newer MacBookPro8,2
  Input: wacom - report id 3 returns 4 bytes of data
  Input: wacom - add WAC_MSG_RETRIES define
  Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K)
  Input: tegra-kbc - correct call to input_free_device
  Input: mpu3050 - correct call to input_free_device
  Input: bcm5974 - add support for touchpads found in MacBookAir4,2
  Input: mma8450 - fix module device table type
  Input: remove CLOCK_TICK_RATE from analog joystick driver
2011-08-24 09:19:03 -07:00
Wanlong Gao 6a20baa9a4 Input: ad714x-i2c - change placement of __init/__exit annotations
Change the placement of __init and __exit annotations to be consistent
with the rest of the drivers.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23 23:17:00 -07:00
Daniel Kurtz 6b4b49fea1 Input: synaptics - process finger (<=5) transitions
Synaptics image sensor touchpads track up to 5 fingers, but only report 2.
They use a special "TYPE=2" (AGM-CONTACT) packet type that reports
the number of tracked fingers and which finger is reported in the SGM
and AGM packets.

With this new packet type, it is possible to tell userspace when 4 or 5
fingers are touching.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23 23:08:32 -07:00
Daniel Kurtz d5051272fc Input: add BTN_TOOL_QUINTTAP for reporting 5 fingers on touchpad
"4-finger scroll" is a gesture supported by some applications and
operating systems.

"Resting thumb" is when a clickpad user rests a finger (e.g., a
thumb), in a "click zone" (typically the bottom of the touchpad) in
anticipation of click+move=select gestures.

Thus, "4-finger scroll + resting thumb" is a 5-finger gesture.
To allow userspace to detect this gesture, we send BTN_TOOL_QUINTTAP.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23 23:08:29 -07:00
Daniel Kurtz 4dc772d274 Input: synaptics - process finger (<=3) transitions
Synaptics image sensor touchpads track 5 fingers, but only report 2.
This patch attempts to deal with some idiosyncrasies of these touchpads:

 * When there are 3 or more fingers, only two are reported.
 * The touchpad tracks the 5 fingers in slot[0] through slot[4].
 * It always reports the lowest and highest valid slots in SGM and AGM
   packets, respectively.
 * The number of fingers is only reported in the SGM packet.  However,
   the number of fingers can change either before or after an AGM
   packet.
 * Thus, if an SGM reports a different number of fingers than the last
   SGM, it is impossible to tell whether the intervening AGM corresponds
   to the old number of fingers or the new number of fingers.
 * For example, when going from 2->3 fingers, it is not possible to tell
   whether tell AGM contains slot[1] (old 2nd finger) or slot[2] (new
   3rd finger).
 * When fingers are added one at at time, from 1->2->3, it is possible to
   track which slots are contained in the SGM and AGM packets:
     1 finger:  SGM = slot[0], no AGM
     2 fingers: SGM = slot[0], AGM = slot[1]
     3 fingers: SGM = slot[0], AGM = slot[2]
 * It is also possible to track which slot is contained in the SGM when 1
   of 2 fingers is removed.  This is because the touchpad sends a special
   (0,0,0) AGM packet whenever all fingers are removed except slot[0]:
     Last AGM == (0,0,0): SGM contains slot[1]
     Else: SGM contains slot[0]
 * However, once there are 3 fingers, if exactly 1 finger is removed, it
   is impossible to tell which 2 slots are contained in SGM and AGM.
   The (SGM,AGM) could be (0,1), (0,2), or (1,2). There is no way to know.
 * Similarly, if two fingers are simultaneously removed (3->1), then it
   is only possible to know if SGM still contains slot[0].
 * Since it is not possible to reliably track which slot is being
   reported, we invalidate the tracking_id every time the number of
   fingers changes until this ambiguity is resolved when:
     a) All fingers are removed.
     b) 4 or 5 fingers are touched, generates an AGM-CONTACT packet.
     c) All fingers are removed except slot[0].  In this special case, the
        ambiguity is resolved since by the (0,0,0) AGM packet.

Behavior of the driver:

When 2 or more fingers are present on the touchpad, the kernel reports
up to two MT-B slots containing the position data for two of the fingers
reported by the touchpad.  If the identity of a finger cannot be tracked
when the number-of-fingers changes, the corresponding MT-B slot will be
invalidated (track_id set to -1), and a new track_id will be assigned in
a subsequent input event report.

The driver always reports the total number of fingers using one of the
EV_KEY/BTN_TOOL_*TAP events. This could differ from the number of valid
MT-B slots for two reasons:
 a) There are more than 2 fingers on the pad.
 b) During ambiguous number-of-fingers transitions, the correct track_id
    for one or both of the slots cannot be determined, so the slots are
    invalidated.

Thus, this is a hybrid singletouch/MT-B scheme. Userspace can detect
this behavior by noting that the driver supports more EV_KEY/BTN_TOOL_*TAP
events than its maximum EV_ABS/ABS_MT_SLOT.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23 23:08:24 -07:00
Daniel Kurtz a6ca40c11e Input: synaptics - decode AGM packet types
A Synaptics image sensor tracks 5 fingers, but can only report 2.

The algorithm for choosing which 2 fingers to report and in which packet:
  Touchpad maintains 5 slots, numbered 0 to 4
  Initially all slots are empty
  As new fingers are detected, assign them to the lowest available slots
  The touchpad always reports:
    SGM: lowest numbered non-empty slot
    AGM: highest numbered non-empty slot, if there is one

In addition, these touchpads have a special AGM packet type which reports
the number of fingers currently being tracked, and which finger is in
each of the two slots.  Unfortunately, these "TYPE=2" packets are only used
when more than 3 fingers are being tracked.  When less than 4 fingers
are present, the 'w' value must be used to track how many fingers are
present, and knowing which fingers are being reported is much more
difficult, if not impossible.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23 23:08:16 -07:00
Daniel Kurtz 3cdfee9ea7 Input: synaptics - add image sensor support
Synaptics makes (at least) two kinds of touchpad sensors:
 * Older pads use a profile sensor that could only infer the location
   of individual fingers based on the projection of their profiles
   onto row and column sensors.
 * Newer pads use an image sensor that can track true finger position
   using a two-dimensional sensor grid.

Both sensor types support an "Advanced Gesture Mode":
 When multiple fingers are detected, the touchpad sends alternating
 "Advanced Gesture Mode" (AGM) and "Simple Gesture Mode" (SGM)
 packets.
 The AGM packets have w=2, and contain reduced resolution finger data
 The SGM packets have w={0,1} and contain full resolution finger data

Profile sensors try to report the "upper" (larger y value) finger in
the SGM packet, and the lower (smaller y value) in the AGM packet.
However, due to the nature of the profile sensor, they easily get
confused when fingers cross, and can start reporting the x-coordinate
of one with the y-coordinate of the other.  Thus, for profile
sensors, "semi-mt" was created, which reports a "bounding box"
created by pairing min and max coordinates of the two pairs of
reported fingers.

Image sensors can report the actual coordinates of two of the fingers
present.  This patch detects if the touchpad is an image sensor and
reports finger data using the MT-B protocol.

NOTE: This patch only adds partial support for 2-finger gestures.
      The proper interpretation of the slot contents when more than
      two fingers are present is left to later patches.  Also,
      handling of 'number of fingers' transitions is incomplete.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23 23:08:12 -07:00
Daniel Kurtz 85615476e2 Input: synaptics - refactor initialization of abs position axes
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23 23:08:06 -07:00
Daniel Kurtz 7afdb842d9 Input: synaptics - refactor agm packet parsing
When a Synaptics touchpad is in "AGM" mode, and multiple fingers are
detected, the touchpad sends alternating "Advanced Gesture Mode" (AGM) and
"Simple Gesture Mode" (SGM) packets.
  The AGM packets have w=2, and contain reduced resolution finger data.
  The SGM packets have w={0,1} and contain full resolution finger data.

Refactor the parsing of agm packets to its own function, and rename the
synaptics_data.mt field to .agm to indicate that it contains the contents of
the last agm packet.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23 23:08:01 -07:00
Daniel Kurtz 6de58dd625 Input: synaptics - refactor y inversion
Synaptics touchpads report increasing y from bottom to top.
This is inverted from normal userspace "top of screen is 0" coordinates.
Thus, the kernel driver reports inverted y coordinates to userspace.

This patch refactors this inversion.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23 23:07:56 -07:00
Dmitry Torokhov 66fd9385ee Input: wacom_w8001 - simplify w8001_remove
Since touchscreen driver does not handle any events to be sent to the
device we can close serio port first and then unregister the input device.

Tested-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23 23:07:51 -07:00
Dmitry Torokhov e9496746cc Input: wacom_w8001 - implement open and close
Implement open() and close() methods for the input device so that we
do not start the device unless there are users listening to the events.

Acked-by: Chris Bagwell <chris@cnpbagwell.com>
Tested-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23 23:07:47 -07:00
Michael Hennerich 9eff794b77 Input: ad714x - read the interrupt status registers in a row
The interrupt status registers should be read in row to avoid invalid data.

Alter "read" method for both bus options to allow reading several registers
in a row and make sure we read interrupt status registers properly.

Read sequence saves 50% of bus transactions compared to single register
reads. So use it also for the result registers, which are also located
in a row.

Also update copyright notice.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-22 09:59:26 -07:00
Dmitry Torokhov c0409feb86 Input: ad714x - use DMA-safe buffers for spi_write()
spi_write() requires use of DMA-safe (cacheline aligned) buffers.
Also use the same buffers when reading data since to avoid extra
locking and potential memory allocation in spi_write_then_read().

Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-22 09:59:20 -07:00
Michael Hennerich 6337de2204 Input: ad714x - fix endianness issues
Allow driver to be used on Big Endian boxes.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-22 09:59:12 -07:00
Michael Hennerich 5b9063b19c Input: ad714xx-spi - force SPI bus into the default 8-bit mode
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-22 09:59:06 -07:00
Axel Lin b9cc510b39 Input: ep93xx_keypad - add missing include of linux/module.h
ep93xx_keypad.c uses interfaces from linux/module.h,
so it should include that file.  This patch fixes build errors.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-21 12:49:45 -07:00
Axel Lin 2782a35132 Input: tnetv107x-ts - add missing include of linux/module.h
tnetv107x-ts.c uses interfaces from linux/module.h,
so it should include that file.  This patch fixes build errors.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-21 12:49:41 -07:00
Jiejing Zhang d70d43d7d7 Input: max11801_ts - correct license statement
The original license statement was confusing since it was unclear if
the license was pure GPLv2 or GPLv2+ and did not match the license
of the driver max11801_ts was derived from. The license is GPLv2+.

Signed-off-by: Jiejing Zhang <jiejing.zhang@freescale.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-20 14:39:53 -07:00
Yufeng Shen 28ac293363 Input: atmel_mxt_ts - report pressure information from the driver
Atmel mxt1386 touch controller has the touch pressure information so
let's report it to the user space.

[dtor@mail.ru: added ABS_RESSURE reporting for ST emulation.]

Signed-off-by: Yufeng Shen <miletus@chromium.org>
Acked-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-16 23:31:51 -07:00
Andrew Drake c331eb580a Input: bcm5974 - Add support for newer MacBookPro8,2
New MacBook Pro devices reporting product name MacBookPro8,2 come with
newer/higher resolution touchpads than others with the same product
name with USB ID 05ac:0252. This patch adds support for these devices.

Signed-off-by: Andrew Drake <adrake@adrake.org>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-16 23:31:43 -07:00
Ping Cheng 3b48c91cdf Input: wacom - report id 3 returns 4 bytes of data
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-16 00:21:52 -07:00
Ping Cheng a417ea4432 Input: wacom - add WAC_MSG_RETRIES define
Use WAC_MSG_RETRIES define instead of a numeric constant.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-16 00:21:48 -07:00
Gerard Braad 18adad1c57 Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K)
Signed-off-by: Gerard Braad <me@gbraad.nl>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-16 00:21:41 -07:00
Axel Lin 22f83205e5 Input: tegra-kbc - correct call to input_free_device
If kzalloc for kbc fails, then we have NULL pointer dereference while
calling input_free_device(kbc->idev) in the error handling.
So it is safer to always use the original name, input_dev.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-11 09:23:06 -07:00
Axel Lin d9b830fa44 Input: mpu3050 - correct call to input_free_device
input_free_device() should be used if input_register_device() was not called
yet or if it failed.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-11 09:22:40 -07:00
Eric Andersson c17ca3f5a2 Input: add driver for Bosch Sensortec's BMA150 accelerometer
Signed-off-by: Albert Zhang <xu.zhang@bosch-sensortec.com>
Signed-off-by: Eric Andersson <eric.andersson@unixphere.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-09 01:33:04 -07:00
Dmitry Torokhov 5e3e4eb1bf Input: polldev - immediately poll device upon opening
To allow open/ioctl(EVIOCGABS)/close use pattern for polled devices read
the device in context of open() call instead of offloading the first read
to a workqueue. This will ensure that once call to open() returns device
would have cached reasonably recent axis values that can be retrieved via
appropriate ioctl.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-09 01:32:45 -07:00
Joshua V. Dillon db0b34b074 Input: bcm5974 - add support for touchpads found in MacBookAir4,2
Added USB device IDs for MacBookAir4,2 trackpad. Device constants were
copied from the MacBookAir3,2 constants. The 4,2 device specification is
reportedly unchanged from the 3,2 predecessor and seems to work well.

Signed-off-by: Joshua V Dillon <jvdillon@gmail.com>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-08 23:55:03 -07:00
Axel Lin cd566c64f5 Input: mma8450 - fix module device table type
The module device table for of_device_id should use "of" type.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-08 23:54:57 -07:00
Russell King 1bc857f700 ARM: gpio: omap: convert drivers to use asm/gpio.h rather than mach/gpio.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-08 14:27:44 +01:00
Deepak Saxena 18b08c55a9 Input: remove CLOCK_TICK_RATE from analog joystick driver
The analog joystick driver is written for x86 systems. This
patch updates it to use the PIT_TICK_RATE value instead of
CLOCK_TICK_RATE as they are equivalent on x86 and we want to
deprecate the latter.

Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-04 23:41:36 -07:00
Linus Torvalds 0ea648441a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ad7879 - fix deficient device disable
  Input: gpio_keys - fix two typos in devicetree documentation
  Input: mma8450 - add device tree probe support
  Input: gpio_keys - return proper error code if memory allocation fails
  Input: lm8323 - add missing device_remove_file for dev_attr_time
  Input: tegra-kbc - fix computation of polling time
  Input: kxtj9 - explicitly include module.h
  Input: psmouse - hgpk.c needs module.h
2011-08-03 22:00:09 -10:00
Amy Maloche 11205bb63e Input: add support for pm8xxx based vibrator driver
Add support for pm8xx based vibrator to facilitate haptics.
This module uses the ff-memless framework.

Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-02 22:21:17 -07:00
Michael Hennerich 4fecc2088f Input: ad7879 - fix deficient device disable
Input close or device disable should not interact with the exported
gpiolib functionality. However that's the case. __ad7879_disable()
clears the entire AD7879_REG_CTRL2, while it should just power down
the ADC and its reference.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-02 22:17:44 -07:00
Michal Simek 5f9288af06 input: xilinx_ps2: Add missing of_address.h header
Add missing header.

Error log:
CC      drivers/input/serio/xilinx_ps2.o
drivers/input/serio/xilinx_ps2.c: In function 'xps2_of_probe':
drivers/input/serio/xilinx_ps2.c:249: error: implicit declaration of function 'of_address_to_resource'

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-08-01 17:07:21 +01:00
Shawn Guo 71ff069c3d Input: mma8450 - add device tree probe support
It adds device tree probe support for mma8450 driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Eric Miao <eric.miao@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-31 20:08:15 -07:00
Tobias Klauser 1f4bb06643 Input: gpio_keys - return proper error code if memory allocation fails
Return -ENOMEM if kzalloc fails in gpio_keys_get_devtree_pdata().

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-30 12:19:02 -07:00
Axel Lin 52db9819ac Input: lm8323 - add missing device_remove_file for dev_attr_time
Add missing device_remove_file() for dev_attr_time in lm8323_remove().
Also calling device_remove_file() in lm8323_probe() error path to
remove sysfs attribute file.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-30 12:18:57 -07:00
Rakesh Iyer 3f27757a11 Input: tegra-kbc - fix computation of polling time
Fix a constant definition and computation of polling time.

[dtor@mail.ru: switched to using DIV_ROUND_UP as was suggested by
 Thierry Reding <thierry.reding@avionic-design.de>]

Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-30 12:03:36 -07:00
Stephen Rothwell 2501ec9766 Input: kxtj9 - explicitly include module.h
We need to explicitly include module.h since some of its facilities
are used.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-30 12:03:32 -07:00
Randy Dunlap ab3d0abe2e Input: psmouse - hgpk.c needs module.h
hgpk.c uses interfaces from linux/module.h, so it should include that file.
This fixes build errors.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-30 12:03:26 -07:00
Linus Torvalds 70a3eff576 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
  Input: synaptics - fix reporting of min coordinates
  Input: tegra-kbc - enable key autorepeat
  Input: kxtj9 - fix locking typo in kxtj9_set_poll()
  Input: kxtj9 - fix bug in probe()
  Input: intel-mid-touch - remove pointless checking for variable 'found'
  Input: hp_sdc - staticize hp_sdc_kicker()
  Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure
  Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data
  Input: cy8ctmg110_ts - constify i2c_device_id table
  Input: cy8ctmg110_ts - fix checking return value of i2c_master_send
  Input: lifebook - make dmi callback functions return 1
  Input: atkbd - make dmi callback functions return 1
  Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS
  Input: gpio_keys - add support for device-tree platform data
  Input: aiptek - remove double define
  Input: synaptics - set minimum coordinates as reported by firmware
  Input: synaptics - process button bits in AGM packets
  Input: synaptics - rename set_slot to be more descriptive
  Input: synaptics - fuzz position for touchpad with reduced filtering
  Input: synaptics - set resolution for MT_POSITION_X/Y axes
  ...
2011-07-27 09:24:56 -07:00
Dmitry Torokhov aa7eb8e78d Merge branch 'next' into for-linus 2011-07-27 00:54:47 -07:00
Linus Torvalds b0189cd087 Merge branch 'next/devel2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
* 'next/devel2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (47 commits)
  OMAP: Add debugfs node to show the summary of all clocks
  OMAP2+: hwmod: Follow the recommended PRCM module enable sequence
  OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code
  OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming
  OMAP2+: PM: idle clkdms only if already in idle
  OMAP2+: clockdomain: add clkdm_in_hwsup()
  OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework
  OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition()
  OMAP4: hwmod: Introduce the module control in hwmod control
  OMAP4: cm: Add two new APIs for modulemode control
  OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure
  OMAP4: hwmod data: Add PRM context register offset
  OMAP4: prm: Remove deprecated functions
  OMAP4: prm: Replace warm reset API with the offset based version
  OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros
  OMAP: hwmod: Wait the idle status to be disabled
  OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros
  OMAP2+: hwmod: Init clkdm field at boot time
  OMAP4: hwmod data: Add clock domain attribute
  OMAP4: clock data: Add missing divider selection for auxclks
  ...
2011-07-26 17:42:18 -07:00
Linus Torvalds d3ec4844d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  fs: Merge split strings
  treewide: fix potentially dangerous trailing ';' in #defined values/expressions
  uwb: Fix misspelling of neighbourhood in comment
  net, netfilter: Remove redundant goto in ebt_ulog_packet
  trivial: don't touch files that are removed in the staging tree
  lib/vsprintf: replace link to Draft by final RFC number
  doc: Kconfig: `to be' -> `be'
  doc: Kconfig: Typo: square -> squared
  doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
  drivers/net: static should be at beginning of declaration
  drivers/media: static should be at beginning of declaration
  drivers/i2c: static should be at beginning of declaration
  XTENSA: static should be at beginning of declaration
  SH: static should be at beginning of declaration
  MIPS: static should be at beginning of declaration
  ARM: static should be at beginning of declaration
  rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
  Update my e-mail address
  PCIe ASPM: forcedly -> forcibly
  gma500: push through device driver tree
  ...

Fix up trivial conflicts:
 - arch/arm/mach-ep93xx/dma-m2p.c (deleted)
 - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
 - drivers/net/r8169.c (just context changes)
2011-07-25 13:56:39 -07:00
Dmitry Torokhov 3c6b50141e Input: synaptics - fix reporting of min coordinates
We were testing wrong bit in the extended capability query.

Reported-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-25 01:38:21 -07:00
Rakesh Iyer 5599d2e60b Input: tegra-kbc - enable key autorepeat
To support key repeats, keyboard needs to be setup as an autorepeating
device.

Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-25 01:26:17 -07:00
Linus Torvalds a99a7d1436 Merge branch 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mips: Fix i8253 clockevent fallout
  i8253: Cleanup outb/inb magic
  arm: Footbridge: Use common i8253 clockevent
  mips: Use common i8253 clockevent
  x86: Use common i8253 clockevent
  i8253: Create common clockevent implementation
  i8253: Export i8253_lock unconditionally
  pcpskr: MIPS: Make config dependencies finer grained
  pcspkr: Cleanup Kconfig dependencies
  i8253: Move remaining content and delete asm/i8253.h
  i8253: Consolidate definitions of PIT_LATCH
  x86: i8253: Consolidate definitions of global_clock_event
  i8253: Alpha, PowerPC: Remove unused asm/8253pit.h
  alpha: i8253: Cleanup remaining users of i8253pit.h
  i8253: Remove I8253_LOCK config
  i8253: Make pcsp sound driver use the shared i8253_lock
  i8253: Make pcspkr input driver use the shared i8253_lock
  i8253: Consolidate all kernel definitions of i8253_lock
  i8253: Unify all kernel declarations of i8253_lock
  i8253: Create linux/i8253.h and use it in all 8253 related files
2011-07-22 16:51:56 -07:00
Dan Carpenter 6eab7ce65a Input: kxtj9 - fix locking typo in kxtj9_set_poll()
According to the comments we want to call mutex_lock() here instead
of mutex_unlock().  That makes more sense.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-19 23:18:09 -07:00
Dan Carpenter 4fd9fcf7c1 Input: kxtj9 - fix bug in probe()
We are testing the wrong variable here.  I believe tj9->input_dev
is always NULL at this point, so probe() will fail.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-19 23:18:05 -07:00
Axel Lin e449edbb91 Input: intel-mid-touch - remove pointless checking for variable 'found'
The implementation does break from the for loop after we assign 'i' to
variable 'found'.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-18 17:10:41 -07:00
Axel Lin dc3e8247eb Input: hp_sdc - staticize hp_sdc_kicker()
It's not referenced outside this file so there's no need for it to be in
the global name space.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-18 17:10:36 -07:00
Axel Lin edf21d9c38 Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure
Make sure we are passing the same cookie in all calls to
request_any_context_irq() and free_irq().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-18 17:10:31 -07:00
Axel Lin 2c204109ec Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data
The implementation in cy8ctmg110_probe() does not properly set reset_pin
and irq_pin from platform data. Let's fix it.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-18 17:10:27 -07:00
Arnd Bergmann bc574e190d Merge branches 'omap/prcm' and 'omap/mfd' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into next/devel-2 2011-07-17 21:48:22 +02:00
Axel Lin d448303a77 Input: cy8ctmg110_ts - constify i2c_device_id table
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-13 00:08:24 -07:00
Axel Lin 21184c4efb Input: cy8ctmg110_ts - fix checking return value of i2c_master_send
i2c_master_send returns negative errno, or else the number of bytes written.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-13 00:08:20 -07:00
Axel Lin fea2021c76 Input: lifebook - make dmi callback functions return 1
We only care about if there is a successful match from the table (or
no match at all), so let's make dmi_check_system return immediately
instead of iterating thorough the whole table.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-13 00:08:15 -07:00
Axel Lin c388b2c67e Input: atkbd - make dmi callback functions return 1
We only care about if there is a successful match from the table (or
no match at all), so let's make dmi_check_system return immediately
instead of iterating thorough the whole table.

Make the dmi callback function return 1 then dmi_check_system
will return immediately if we have a successful match.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-13 00:08:10 -07:00
Jiri Kosina b7e9c223be Merge branch 'master' into for-next
Sync with Linus' tree to be able to apply pending patches that
are based on newer code already present upstream.
2011-07-11 14:15:55 +02:00
Dmitry Torokhov bdda821628 Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS
This reduces amount #ifdeds in the code.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-10 16:08:32 -07:00
David Jander fd05d08920 Input: gpio_keys - add support for device-tree platform data
This patch enables fetching configuration data, which is normally provided
via platform_data, from the device-tree instead.

If the device is configured from device-tree data, the platform_data struct
is not used, and button data needs to be allocated dynamically. Big part of
this patch deals with confining pdata usage to the probe function, to make
this possible.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-10 16:08:28 -07:00
Edwin van Vliet eadba0c9c4 Input: aiptek - remove double define
Constant AIPTEK_TOOL_BUTTON_PEN_MODE was defined twice.

Signed-off-by: Edwin van Vliet <edwin@cheatah.nl>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-10 16:08:23 -07:00
Dmitry Torokhov a66413fbc3 Input: synaptics - set minimum coordinates as reported by firmware
Newer Synaptics firmware allows to query minimum coordinates reported by
the device, let's use this data.

Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-09 12:33:35 -07:00
Peter Ujfalusi 625cbe46bc input: twl6040-vibra: Do not use wrapper for irq request
The twl6040_request_irq/free_irq inline functions are going
to be removed, so replace them with direct calls.
The irq number is provided by the core driver via resource.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-07 14:23:21 +03:00
Daniel Kurtz 28d5fd860f Input: synaptics - process button bits in AGM packets
AGM packets contain valid button bits, too.
This patch refactors packet processing to parse button bits in AGM packets.
However, they aren't actually used or reported.

The point is to more completely process AGM packets,
and prepare for future patches that may actually use AGM packet button bits.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06 23:01:17 -07:00
Daniel Kurtz bea9f0ff26 Input: synaptics - rename set_slot to be more descriptive
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06 23:01:13 -07:00
Daniel Kurtz a9f0b79edf Input: synaptics - fuzz position for touchpad with reduced filtering
Synaptics touchpads indicate via a capability bit when they perform reduced
filtering on position data. In such a case, use a non-zero fuzz value.
Fuzz = 8 was chosen empirically by observing the raw position data
reported by a clickpad indicating it had reduced filtering.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06 23:01:09 -07:00
Daniel Kurtz 8be3c650f5 Input: synaptics - set resolution for MT_POSITION_X/Y axes
Set resolution for MT_POSITION_X and MT_POSITION_Y to match ABS_X and
ABS_Y, respectively.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06 23:01:00 -07:00
Ping Cheng 8446001450 Input: wacom - cleanup a return value for the old Bamboo
The old code may call input_sync() without sending any other events.
While it will be suppressed by the input core not calling it at all
is still cheaper.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06 21:24:35 -07:00
Ping Cheng 0bd10ef8f8 Input: wacom - update Graphire4 and old Bamboo tablet buttons
Bamboo touch sets BTN_BACK, BTN_FORWARD, BTN_LEFT, and BTN_RIGHT
as the default button events for tablet buttons. Change Graphire4
and old Bamboo to the same settings.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06 21:24:25 -07:00
Ping Cheng 998c454e1c Input: wacom - add serial number for Graphire4 and old Bamboo
With the removal of BTN_TOOL_FINGER for tablet buttons and
expresskeys, serial number is needed to distingush if the
events were from a regular tool (stylus, eraser, or mouse)
or the attribures (buttons, strips, or wheels) on the tablet
since there are overlapped events between the tools and the
tablet attributes.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06 21:24:15 -07:00
Ping Cheng 358ea22ee3 Input: wacom - remove BTN_TOOL_FINGER for pad
BTN_TOOL_FINGER was designed to indicate a single finger touch.
Remove the lines that borrowed this type for expresskeys and
tablet buttons.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06 21:24:06 -07:00
Chris Hudson e8e70d8391 Input: add support for Kionix KXTJ9 accelerometer
Signed-off-by: Chris Hudson <chudson@kionix.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06 21:23:54 -07:00
Samuel Ortiz 63ef1124f1 input: pmic8xxx-pwrkey: Do not use mfd_get_data()
mfd_get_data() has been removed from the MFD API.

Cc: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-05 10:38:43 +02:00
Samuel Ortiz 1d08382a0e input: pmic8xxx-keypad: Do not use mfd_get_data()
mfd_get_data() has been removed from the MFD API.

Cc: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-05 10:38:43 +02:00
Wolfram Sang 77da38387e Input: wm97xx - mark channels which need pen_down
Currently, battery drivers also use poll_sample() provided by the
wm97xx-core but this code always checks if the pen is down. Mark the
channels which really need this (i.e. for the touchscreen) with the
PEN_DOWN bit, and skip the checks otherwise. Now, the battery channels
can always be read.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 19:31:47 -07:00
Wolfram Sang c8f205258b Input: wm97xx - refactor channel selection in poll_sample()
The current implementation of poll_sample() has the problem that one of
its arguments, the channel to be selected, differs from wm9713 to other
variants. This parameter gets passed to the (currently unused)
mach-specific functions pre_sample() and post_sample() which thus have
to deal with codec-specific differences. Refactor the routine so that
the argument to poll_sample() is generic for all codecs and do necessary
conversions only in the codec-specific driver. The outcome even uses
less code and removes the non-standard use of the PEN_DOWN bit to mark
the AUX-channels.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 19:31:38 -07:00
Wolfram Sang 2456689b3b Input: wm97xx - remove redundant define
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 19:31:28 -07:00
Stefano Stabellini 5f098ecd42 Input: xen-kbdfront - enable driver for HVM guests
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 19:31:19 -07:00
Chris Moeller b514d4f7c6 Input: xpad - enable rumble support for XBox360 Wireless Controllers
This patch implements rumble support for XBox360 Wireless Controllers.

Signed-off-by: Chris Moeller <kode54@gmail.c>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 19:31:06 -07:00
Misael Lopez Cruz cc697d3839 input: Add initial support for TWL6040 vibrator
Add twl6040_vibra as a child of MFD device twl6040_codec. This
implementation covers the PCM-to-PWM mode of TWL6040 vibrator
module.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Tejun Heo <tj@kernel.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 19:36:18 +03:00
Peter Ujfalusi 4ae6df5e10 MFD: twl4030-audio: Rename platform data
Allign the platform data names for twl4030 audio submodule:
twl4030_audio_data: for the core MFD driver
twl4030_codec_data: for ASoC codec driver
twl4030_vibra_data: for the input/ForceFeedback driver

To avoid breakage, change all depending drivers, files
to use the new types.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-04 18:44:02 +03:00
Peter Ujfalusi 57fe7251f5 MFD: twl4030-codec -> twl4030-audio: Rename the driver
Rename the driver, and header file from twl4030-codec to
twl4030-audio.
To avoid breakage change depending drivers at the same time.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Misael Lopez Cruz <misael.lopez@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-04 18:43:56 +03:00
Dmitry Torokhov cca8edfd2e Input: sh_keysc - fix compile warning
The "#if" above should really be an "#ifdef" to avoid this warning:

  CC      drivers/input/keyboard/sh_keysc.o
drivers/input/keyboard/sh_keysc.c:294:5: warning: "CONFIG_PM_SLEEP" is
not defined

Reported-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 07:12:26 -07:00
Iiro Valkonen a93d4f2d02 Input: atmel_mxt_ts - handle objects with multiple instances correctly
Handle the objects with multiple instances correctly when the configuration
data is loaded.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 03:19:20 -07:00
Iiro Valkonen 81c88a711a Input: atmel_mxt_ts - update object list
Update the object list to include new objects, and add unique identifiers
so we can distinguish between old & new generation of the same object.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 03:19:11 -07:00
Jiejing Zhang c7b4a5d58b Input: mpr121 - improve sensibility of touch key
The Quick Charge bit in Electrode conf register should be set in init
function. This bit was missed in chip's document, which may cause touch
controller charge too slow to generate an interrupt.

Also, adjust the default vlaue of touch and release threshold
to make touch key more sensitive, this fix touch may not sensitive
after setup with plastic case.

Signed-off-by: Jiejing Zhang <jiejing.zhang@freescale.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-29 01:32:49 -07:00
Joseph Lai 631b16e81e Input: add a driver to support InvenSense mpu3050 gyroscope chip
This driver is registered as an input device. An IRQ is required in this
basic driver configuration.

Signed-off-by: Joseph Lai <joseph_lai@wistron.com>
[Cleaned up PM_RUNTIME defines]
Signed-off-by: Alan Cox <alan@linux.intel.com>
[dtor@mail.ru: consolidated PM methods, some code rearrangement]
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-29 00:26:17 -07:00
Hans-Christian Egtvedt 7c40952295 Input: update author email for gpio_mouse, at32psif, and atmel-wm97xx
This patch updates the email address of the gpio_mouse, at32psif, and
atmel-wm97xx drivers supported by me to an email account I will use on a more
regular basis in the future.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-29 00:26:02 -07:00
Axel Lin 1638207910 Input: gpio_keys - fix a memory leak
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-29 00:22:47 -07:00
Igor Grinberg 58c244009e Input: ads7846 - cleanup GPIO initialization
Use gpio_request_one() instead of multiple gpiolib calls.
This also simplifies error handling a bit.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27 13:08:05 -07:00
Ping Cheng 11d0cf8859 Input: wacom - add 3 new models - 6A, 6B, and 97
Tested-by: Alex Tervoort <alex.tervoort@gmail.com> for 6A
Signed-off-by: David Foley <favux.is@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27 13:07:55 -07:00
Ping Cheng a001a8f3ce Input: wacom - Wacom Bamboo Pen D4 has 1024 pressure levels
D4 has 1024, not 512, pressure levels.

Reported-by: David Foley <favux.is@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27 13:07:45 -07:00
David Jander b23302052d Input: gpio_keys - move to late_initcall
Initialize gpio_keys driver at late_initcall level, to give it a chance to
work with GPIO expanders that might not be ready yet if we initialize the
driver at module_init time.

This is strictly a band-aid until there is a better way to specify
inter-device dependencies.

Signed-off-by: David Jander <david@protonic.nl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27 12:44:05 -07:00
Axel Lin 6a592a7f45 Input: tnetv107x-ts - fix MODULE_ALIAS
Remove the space between "platform:" prefix and the driver name.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27 12:43:34 -07:00
Axel Lin 51a3db41e1 Input: tnetv107x-keypad - fix MODULE_ALIAS
Remove the space between "platform:" prefix and the driver name.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27 12:43:23 -07:00
Jesper Juhl 5993548725 Input: remove unneeded version.h includes
It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/input/.
This patch removes them.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27 12:42:54 -07:00
Justin P. Mattock 83ae417b85 Input: libps2.c: fix comment typo arrrives.
Fix a typo in a comment.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-27 12:28:56 +02:00
Eric Miao 3ead8b5ddb Input: add support for mma8450 accelerometer
Signed-off-by: Sammy He <r62914@freescale.com>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-22 01:27:25 -07:00
Aristeu Rozanski 1483f5513b Input: wacom - use only one interface with DTU-2231
The Wacom DTU-2231 tablet has two interfaces on its default configuration
and both have HID class, leading to the creation of two input devices
instead of one. Only the first one is used, so filter out the second.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-22 01:26:09 -07:00
Ping Cheng 71c86ce597 Input: wacom - Cintiq 21UX2 does not have menu strips
So don't set ABS_RX/ABS_RY for them.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-22 01:25:59 -07:00
Magnus Hörlin fabadbc754 Input: xpad - add support for two more dance pads and a guitar
Signed-off-by: Magnus Hörlin <magnus@alefors.se>
Reviewed-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-21 14:41:09 -07:00
David Jander 7e2ecdf438 Input: gpio_keys - switch to using threaded IRQs
Use a threaded interrupt handler in order to permit the handler to use
a GPIO driver that causes things like I2C transactions being done inside
the handler context.

Signed-off-by: David Jander <david@protonic.nl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-21 14:33:34 -07:00
Leigh Brown eaa499aebf Input: lm8323 - use oneshot level triggered interrupts
According to the data sheet the interrupt should be level rather than
edge triggered.  This fixes the issue of the Nokia N810 keypad stopping
responding if multiple key events occur in quick succession.

Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-21 05:08:40 -07:00
Felipe Balbi 61cf3813d3 Input: lm8323 - convert to threaded IRQ
There's no need for that workqueue anymore. Get rid of it and move to
threaded IRQs instead.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Tested-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-21 05:08:30 -07:00
Wolfram Sang fef95faeae Input: qt1070 - remove obsolete cleanup for clientdata
A few new i2c-drivers came into the kernel which clear the clientdata
pointer on exit or error. This is not required anymore since the core
will do it for us.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-21 04:31:53 -07:00
Linus Torvalds c01ad40819 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sh_keysc - 8x8 MODE_6 fix
  Input: omap-keypad - add missing input_sync()
  Input: evdev - try to wake up readers only if we have full packet
  Input: properly assign return value of clamp() macro.
2011-06-20 08:59:46 -07:00
Magnus Damm cca23d0b53 Input: sh_keysc - 8x8 MODE_6 fix
According to the data sheet for G4, AP4 and AG5 KEYSC MODE_6 is 8x8 keys.
Bump up MAXKEYS to 64 too.

Signed-off-by: Magnus Damm <damm@opensource.se>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-18 02:55:01 -07:00
Janusz Krzysztofik b27af563be Input: omap-keypad - add missing input_sync()
Otherwise the updated evdev driver (commit cdda911c34,
"Input: evdev - only signal polls on full packets") no longer works on
top of omap-keypad.

Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-18 02:54:42 -07:00
Dmitry Torokhov da40b0b6b4 Input: evdev - try to wake up readers only if we have full packet
We should only wake waiters on the event device when we actually post
an EV_SYN/SYN_REPORT to the queue. Otherwise we end up making waiting
threads runnable only to go right back to sleep because the device
still isn't readable.

Reported-by: Jeffrey Brown <jeffbrown@android.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-18 02:54:02 -07:00
Joe Perches 28f65c11f2 treewide: Convert uses of struct resource to resource_size(ptr)
Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-10 14:55:36 +02:00
Ralf Baechle 16ba9b0612 i8253: Make pcspkr input driver use the shared i8253_lock
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Link: http://lkml.kernel.org/r/20110601180610.453577265@duck.linux-mips.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-09 15:01:38 +02:00
Ralf Baechle 334955ef96 i8253: Create linux/i8253.h and use it in all 8253 related files
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20110601180610.054254048@duck.linux-mips.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

 arch/arm/mach-footbridge/isa-timer.c |    2 +-
 arch/mips/cobalt/time.c              |    2 +-
 arch/mips/jazz/irq.c                 |    2 +-
 arch/mips/kernel/i8253.c             |    2 +-
 arch/mips/mti-malta/malta-time.c     |    2 +-
 arch/mips/sgi-ip22/ip22-time.c       |    2 +-
 arch/mips/sni/time.c                 |    2 +-
 arch/x86/kernel/apic/apic.c          |    2 +-
 arch/x86/kernel/apm_32.c             |    2 +-
 arch/x86/kernel/hpet.c               |    2 +-
 arch/x86/kernel/i8253.c              |    2 +-
 arch/x86/kernel/time.c               |    2 +-
 drivers/block/hd.c                   |    2 +-
 drivers/clocksource/i8253.c          |    2 +-
 drivers/input/gameport/gameport.c    |    2 +-
 drivers/input/joystick/analog.c      |    2 +-
 drivers/input/misc/pcspkr.c          |    2 +-
 include/linux/i8253.h                |   11 +++++++++++
 sound/drivers/pcsp/pcsp.h            |    2 +-
 19 files changed, 29 insertions(+), 18 deletions(-)
2011-06-09 15:01:37 +02:00
Linus Torvalds 55db4c64ed Revert "tty: make receive_buf() return the amout of bytes received"
This reverts commit b1c43f82c5.

It was broken in so many ways, and results in random odd pty issues.

It re-introduced the buggy schedule_work() in flush_to_ldisc() that can
cause endless work-loops (see commit a5660b41af6a: "tty: fix endless
work loop when the buffer fills up").

It also used an "unsigned int" return value fo the ->receive_buf()
function, but then made multiple functions return a negative error code,
and didn't actually check for the error in the caller.

And it didn't actually work at all.  BenH bisected down odd tty behavior
to it:
  "It looks like the patch is causing some major malfunctions of the X
   server for me, possibly related to PTYs.  For example, cat'ing a
   large file in a gnome terminal hangs the kernel for -minutes- in a
   loop of what looks like flush_to_ldisc/workqueue code, (some ftrace
   data in the quoted bits further down).

   ...

   Some more data: It -looks- like what happens is that the
   flush_to_ldisc work queue entry constantly re-queues itself (because
   the PTY is full ?) and the workqueue thread will basically loop
   forver calling it without ever scheduling, thus starving the consumer
   process that could have emptied the PTY."

which is pretty much exactly the problem we fixed in a5660b41af.

Milton Miller pointed out the 'unsigned int' issue.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: Milton Miller <miltonm@bga.com>
Cc: Stefan Bigler <stefan.bigler@keymile.com>
Cc: Toby Gray <toby.gray@realvnc.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-04 06:33:24 +09:00
Trilok Soni 92d57a73e4 input: Add support for Qualcomm PMIC8XXX power key
Add support for PMIC8XXX power key driven over dedicated
KYPD_PWR_N pin.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26 19:45:54 +02:00
Trilok Soni 39325b59d8 input: Add Qualcomm pm8xxx keypad controller driver
Add Qualcomm PMIC8XXX based keypad controller driver
supporting upto 18x8 matrix configuration.

Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26 19:45:53 +02:00
Samuel Ortiz a4579ad2bb mfd: Use mfd cell platform_data for twl4030 codec cells platform bits
With the addition of a platform device mfd_cell pointer, MFD drivers
can go back to passing platform data back to their sub drivers.
This allows for an mfd_cell->mfd_data removal and thus keep the
sub drivers MFD agnostic. This is mostly needed for non MFD aware
sub drivers.

Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26 19:45:09 +02:00
Linus Torvalds 0798b1dbfb Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (26 commits)
  arch/tile: prefer "tilepro" as the name of the 32-bit architecture
  compat: include aio_abi.h for aio_context_t
  arch/tile: cleanups for tilegx compat mode
  arch/tile: allocate PCI IRQs later in boot
  arch/tile: support signal "exception-trace" hook
  arch/tile: use better definitions of xchg() and cmpxchg()
  include/linux/compat.h: coding-style fixes
  tile: add an RTC driver for the Tilera hypervisor
  arch/tile: finish enabling support for TILE-Gx 64-bit chip
  compat: fixes to allow working with tile arch
  arch/tile: update defconfig file to something more useful
  tile: do_hardwall_trap: do not play with task->sighand
  tile: replace mm->cpu_vm_mask with mm_cpumask()
  tile,mn10300: add device parameter to dma_cache_sync()
  audit: support the "standard" <asm-generic/unistd.h>
  arch/tile: clarify flush_buffer()/finv_buffer() function names
  arch/tile: kernel-related cleanups from removing static page size
  arch/tile: various header improvements for building drivers
  arch/tile: disable GX prefetcher during cache flush
  arch/tile: tolerate disabling CONFIG_BLK_DEV_INITRD
  ...
2011-05-25 15:35:32 -07:00
Hans Petter Selasky 8c127f0717 Input: properly assign return value of clamp() macro.
[dtor@mail.ru: added mousedev changes]
Signed-off-by: Hans Petter Selasky <hselasky@c2i.net>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-25 09:24:58 -07:00
Linus Torvalds 4637f40f20 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander
  Input: tsc2007 - add X, Y and Z fuzz factors to platform data
  Input: tsc2007 - add poll_period parameter to platform data
  Input: tsc2007 - add poll_delay parameter to platform data
  Input: tsc2007 - add max_rt parameter to platform data
  Input: tsc2007 - debounce pressure measurement
  Input: ad714x - fix captouch wheel option algorithm
  Input: ad714x - allow platform code to specify irqflags
  Input: ad714x - fix threshold and completion interrupt masks
  Input: ad714x - fix up input configuration
  Input: elantech - remove support for proprietary X driver
  Input: elantech - report multitouch with proper ABS_MT messages
  Input: elantech - export pressure and width when supported
  Input: elantech - describe further the protocol
  Input: atmel_tsadcc - correct call to input_free_device
  Input: add driver FSL MPR121 capacitive touch sensor
  Input: remove useless synchronize_rcu() calls
  Input: ads7846 - fix gpio_pendown configuration
  Input: ads7846 - add possibility to use external vref on ads7846
  Input: rotary-encoder - add support for half-period encoders
  ...
2011-05-24 11:58:49 -07:00
Dmitry Torokhov b73077eb03 Merge branch 'next' into for-linus 2011-05-24 00:06:26 -07:00
Linus Torvalds 99dff58562 Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits)
  serial: 8250_pci: add support for Cronyx Omega PCI multiserial board.
  tty/serial: Fix break handling for PORT_TEGRA
  tty/serial: Add explicit PORT_TEGRA type
  n_tracerouter and n_tracesink ldisc additions.
  Intel PTI implementaiton of MIPI 1149.7.
  Kernel documentation for the PTI feature.
  export kernel call get_task_comm().
  tty: Remove to support serial for S5P6442
  pch_phub: Support new device ML7223
  8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
  ASoC: Update cx20442 for TTY API change
  pch_uart: Support new device ML7223 IOH
  parport: Use request_muxed_region for IT87 probe and lock
  tty/serial: add support for Xilinx PS UART
  n_gsm: Use print_hex_dump_bytes
  drivers/tty/moxa.c: Put correct tty value
  TTY: tty_io, annotate locking functions
  TTY: serial_core, remove superfluous set_task_state
  TTY: serial_core, remove invalid test
  Char: moxa, fix locking in moxa_write
  ...

Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and
drivers/tty/serial/Makefile.

I did the hci_ldisc thing as an evil merge, cleaning things up.
2011-05-23 12:23:20 -07:00
Geert Uytterhoeven 659e6ed55f input/atari: Fix mouse movement and button mapping
Up and down movements were reversed, left and right buttons were swapped.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:12 +02:00
Michael Schmitz 186f200a95 input/atari: Fix atarimouse init
Atarimouse fails to load as a module (with ENODEV), due to a brown paper
bag bug, misinterpreting the semantics of atari_keyb_init().

[geert] Propagate the return value of atari_keyb_init() everywhere

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:11 +02:00
Michael Schmitz 7786908c3c input/atari: Use the correct mouse interrupt hook
The Atari keyboard driver calls atari_mouse_interrupt_hook if it's set, not
atari_input_mouse_interrupt_hook. Fix below.

[geert] Killed off atari_mouse_interrupt_hook completely, after fixing another
incorrect assignment in atarimouse.c.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:11 +02:00
Michael Hennerich 9d2e173644 Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander
From http://www.analog.com/ADP5589:
The ADP5589 is an I/O port expander and keypad matrix decoder designed
for QWERTY type phones that require a large keypad matrix and expanded
I/O lines.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-19 00:59:55 -07:00
Thierry Reding 891e376b1e Input: tsc2007 - add X, Y and Z fuzz factors to platform data
These new platform-specific values can be used to set the fuzz parameter
passed to the input_set_abs_params() function for the ABS_X, ABS_Y and
ABS_PRESSURE axes.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17 09:38:53 -07:00
Thierry Reding 1af38eac8c Input: tsc2007 - add poll_period parameter to platform data
This new parameter allows the polling frequency to be configured while
keeping the default of once every millisecond.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17 09:38:49 -07:00
Thierry Reding 2d137c7ed2 Input: tsc2007 - add poll_delay parameter to platform data
Depending on the quality of the touch panel, the time for the X-, X+, Y-
and Y+ inputs to settle may vary. The poll_delay parameter can be used
to override the default of 1 millisecond.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17 09:38:43 -07:00
Thierry Reding 84005eb5ea Input: tsc2007 - add max_rt parameter to platform data
Finger touch events or very quick stylus events on low-quality panels
can cause the tsc2007 to read bogus values. Looking at oscilloscope
snapshots, this seems to be caused by the touch event disappearing
during the measurements. These bogus values result in misclicks, where
the X and Y values deviate from the real position.

Most of these misclicks can be filtered out by setting a low enough
threshold for the maximum resistance (which is loosely the inverse of
the pressure) allowed to consider a set of values valid. Since this
behaviour is largely dependent on the type and quality of the panel,
this commit introduces the max_rt parameter. The default value is kept
at MAX_12BIT.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17 09:38:39 -07:00
Thierry Reding 4a1a42af0a Input: tsc2007 - debounce pressure measurement
When the controller signals a pen-down event via the platform-specific
GPIO, while the sample values indicate an invalid measurement, the
measurement needs to be repeated.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17 09:38:34 -07:00
Michael Hennerich f1e430e636 Input: ad714x - fix captouch wheel option algorithm
As reported by Jean-Francois Dagenais, the wheel algorithm caused a
divide by zero exception due to missing variable pre-initialization.
In fact it turned out that the whole algorithm had several problems.
It is therefore replaced with something that is known working.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16 23:20:17 -07:00
Michael Hennerich 3532cb0ca2 Input: ad714x - allow platform code to specify irqflags
Add option to specify irqflags in platfrom data.
Also update copyright notice.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16 23:20:13 -07:00
Michael Hennerich e223cc7e96 Input: ad714x - fix threshold and completion interrupt masks
Fix two issues in the threshold and completion interrupt mask and unmask
functions. According to the AD714x datasheets the highest stage completion
interrupt should be enabled. Fix mask computation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16 23:20:09 -07:00
Michael Hennerich dc5f4f5e9a Input: ad714x - fix up input configuration
Add missing input name and set up parent devices so input devices will
show in proper places in sysfs tree.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16 23:20:04 -07:00
Éric Piel 9cb6cfae4e Input: elantech - remove support for proprietary X driver
Apparently somewhere someone had a proprietary X driver. To get the
multitouch info, it uses some hack on the normal API instead of using
the multitouch protocol. Now that the multitouch info is transmitted
correctly it makes not much sense to keep it. Especially because it's
impossible to find this proprietary X driver anywhere, so the number of
users must be very low.

Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16 22:48:43 -07:00
Éric Piel 89eec4d71e Input: elantech - report multitouch with proper ABS_MT messages
Multitouch info was reported only via a old protocol used by the
proprietary X driver from elantech. Let's report the multitouch info
also following the official MT protocol. It's semi-mt because the device
only reports the lowest/highest coordinates.

This was done following the multi-touch-protocol.txt documentation, and
inspired by the bcm5974 and elantech implementations. Testing was light
as there is not many applications using this protocol yet, but the X
synaptics driver didn't complain and the X multitouch driver behaved
correctly.

Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16 22:48:39 -07:00
Éric Piel f941c705f6 Input: elantech - export pressure and width when supported
Using the info of the Dell/Ubuntu driver, described in the protocol
document, report both width and pressure when pressing 1 and 3
fingers, for the versions of the touchpad which support it.

Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16 22:48:36 -07:00
Julia Lawall 215ef98677 Input: atmel_tsadcc - correct call to input_free_device
This error handling code can be reached before ts_dev->input is
initialized, so it is safer to always use the original name,
input_dev.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-14 23:42:41 -07:00
Chris Metcalf 18aecc2b64 arch/tile: finish enabling support for TILE-Gx 64-bit chip
This support was partially present in the existing code (look for
"__tilegx__" ifdefs) but with this change you can build a working
kernel using the TILE-Gx toolchain and ARCH=tilegx.

Most of these files are new, generally adding a foo_64.c file
where previously there was just a foo_32.c file.

The ARCH=tilegx directive redirects to arch/tile, not arch/tilegx,
using the existing SRCARCH mechanism in the top-level Makefile.

Changes to existing files:

- <asm/bitops.h> and <asm/bitops_32.h> changed to factor the
  include of <asm-generic/bitops/non-atomic.h> in the common header.

- <asm/compat.h> and arch/tile/kernel/compat.c changed to remove
  the "const" markers I had put on compat_sys_execve() when trying
  to match some recent similar changes to the non-compat execve.
  It turns out the compat version wasn't "upgraded" to use const.

- <asm/opcode-tile_64.h> and <asm/opcode_constants_64.h> were
  previously included accidentally, with the 32-bit contents.  Now
  they have the proper 64-bit contents.

Finally, I had to hack the existing hacky drivers/input/input-compat.h
to add yet another "#ifdef" for INPUT_COMPAT_TEST (same as x86_64).

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [drivers/input]
2011-05-12 15:52:12 -04:00
Linus Torvalds 49f019c188 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ads7846 - remove unused variable from struct ads7845_ser_req
  Input: ads7846 - make transfer buffers DMA safe
2011-05-12 10:41:31 -07:00
Zhang Jiejing 36682b81de Input: add driver FSL MPR121 capacitive touch sensor
This patch adds basic support for Freescale MPR121 capacitive touch
sensor.  It's an i2c controller with up to 12 capacitance sensing inputs.

Product information (data sheet, application notes) can be found here:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPR121

Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12 08:28:58 -07:00
Eric Dumazet 7cbbb758d3 Input: remove useless synchronize_rcu() calls
There is no need to call synchronize_rcu() after a list insertion,
or a NULL->ptr assignment.

However, the reverse operations do need this call.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12 08:28:57 -07:00
Igor Grinberg 1201e7e676 Input: ads7846 - fix gpio_pendown configuration
The pendown gpio was requested but not configured for input.
Configure it for input.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12 08:28:57 -07:00
Alexander Stein ebcaaad9d5 Input: ads7846 - add possibility to use external vref on ads7846
Just set vref_mv in your platform config to use external vref. Otherwise
the internal one is used.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12 08:28:56 -07:00
Johan Hovold e70bdd41bd Input: rotary-encoder - add support for half-period encoders
Add support for encoders that have two detents per input signal period.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12 08:28:47 -07:00
Johan Hovold 521a8f5cb7 Input: rotary-encoder - refactor and clean up
Refactor state retrieval and event reporting in interrupt handler.
Remove a few empty lines.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-11 16:54:57 -07:00
Rakesh Iyer baafb43537 Input: tegra-kbc - change wakeup logic to be all or nothing
Tegra hardware design cannot reliably support an arbitrary set of keys
waking up the system. Modify wakeup logic so either any key wakes the
system up or none will do.

Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-11 14:31:09 -07:00
Alexander Stein 28350e330c Input: ads7846 - remove unused variable from struct ads7845_ser_req
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05 08:50:53 -07:00
Alexander Stein 1dbe7dada2 Input: ads7846 - make transfer buffers DMA safe
req.sample needs its own cacheline otherwise accessing req.msg fetches
it in again.

Note: This effect doesn't occur if the underlying SPI driver doesn't use
DMA at all.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05 08:50:47 -07:00
Ville Syrjala 7388754e03 Input: ati_remote2 - return the error code from sysfs channel_mask store
If the channel_mask setup fails when configuring it through sysfs,
return the error code to the caller instead of claiming success.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05 08:49:38 -07:00
Dmitry Torokhov 9cc7c80b57 Input: sh_keysc - only compile PM code if PM is enabled
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05 08:49:18 -07:00
Axel Lin 4296f1ad5a Input: h3600_ts_input - fix a leak of the IRQ during init failure
Make sure we are passing the same cookie in all calls to request_irq() and
free_irq().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-03 09:02:13 -07:00
Dmitry Torokhov 12d0cef701 Input: sh_keysc - make sh_keysc_device_driver static
This variable is not used outside of the module so we should mark it
as static.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-03 09:02:01 -07:00
Linus Torvalds 497ff03444 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wm831x-ts - move BTN_TOUCH reporting to data transfer
  Input: wm831x-ts - allow IRQ flags to be specified
  Input: wm831x-ts - fix races with IRQ management
2011-05-02 20:26:32 -07:00
Magnus Damm 2dfb9a85ec Input: sh_keysc - switch to threaded IRQ handler
Update the KEYSC driver to make use of threaded IRQs with IRQF_ONESHOT
to improve interrupt latency. The driver is using udelay() in the ISR
to make sure the hardware has stabilized. Without using interrupt threads
this delay may affect the latency of the rest of the system.

Also pass dev_name() as string for /proc/interrupts.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-28 09:36:48 -07:00
Magnus Damm b6d2a3e6ff Input: sh_keysc - implement runtime PM support
Convert the KEYSC driver from MSTP bit control through a magic clock
string to making use of Runtime PM.

Also, update the system suspend/resume callbacks to drop the Runtime
PM reference in the case of wakeup disabled.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-28 09:36:43 -07:00
Dmitry Torokhov e490ebdc3c Input: input-polldev - use system-wide freezable workqueue
With introduction of concurrency-managed work queues there is rarely
a point in creating private workqueues.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:22:01 -07:00