Commit Graph

361 Commits

Author SHA1 Message Date
Al Viro dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Andi Kleen 5b952b3c14 [PATCH] Fix MPOL_F_VERIFY
There was a pretty bad bug in there that the code would always check the full
VMA, not the range the user requested.

When the VMA to be checked was merged with the previous VMA this could lead to
spurious failures.

Signed-off-by: "Andi Kleen" <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:28 -07:00
Andi Kleen d42c69972b [PATCH] PCI: Run PCI driver initialization on local node
Run PCI driver initialization on local node

Instead of adding messy kmalloc_node()s everywhere run the
PCI driver probe on the node local to the device.

This would not have helped for IDE, but should for
other more clean drivers that do more initialization in probe().
It won't help for drivers that do most of the work
on first open (like many network drivers)

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:23 -07:00
Christoph Lameter 6e21c8f145 [PATCH] /proc/<pid>/numa_maps to show on which nodes pages reside
This patch was recently discussed on linux-mm:
http://marc.theaimsgroup.com/?t=112085728500002&r=1&w=2

I inherited a large code base from Ray for page migration.  There was a
small patch in there that I find to be very useful since it allows the
display of the locality of the pages in use by a process.  I reworked that
patch and came up with a /proc/<pid>/numa_maps that gives more information
about the vma's of a process.  numa_maps is indexes by the start address
found in /proc/<pid>/maps.  F.e.  with this patch you can see the page use
of the "getty" process:

margin:/proc/12008 # cat maps
00000000-00004000 r--p 00000000 00:00 0
2000000000000000-200000000002c000 r-xp 00000000 08:04 516                /lib/ld-2.3.3.so
2000000000038000-2000000000040000 rw-p 00028000 08:04 516                /lib/ld-2.3.3.so
2000000000040000-2000000000044000 rw-p 2000000000040000 00:00 0
2000000000058000-2000000000260000 r-xp 00000000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000260000-2000000000268000 ---p 00208000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000268000-2000000000274000 rw-p 00200000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000274000-2000000000280000 rw-p 2000000000274000 00:00 0
2000000000280000-20000000002b4000 r--p 00000000 08:04 9126923            /usr/lib/locale/en_US.utf8/LC_CTYPE
2000000000300000-2000000000308000 r--s 00000000 08:04 60071467           /usr/lib/gconv/gconv-modules.cache
2000000000318000-2000000000328000 rw-p 2000000000318000 00:00 0
4000000000000000-4000000000008000 r-xp 00000000 08:04 29576399           /sbin/mingetty
6000000000004000-6000000000008000 rw-p 00004000 08:04 29576399           /sbin/mingetty
6000000000008000-600000000002c000 rw-p 6000000000008000 00:00 0          [heap]
60000fff7fffc000-60000fff80000000 rw-p 60000fff7fffc000 00:00 0
60000ffffff44000-60000ffffff98000 rw-p 60000ffffff44000 00:00 0          [stack]
a000000000000000-a000000000020000 ---p 00000000 00:00 0                  [vdso]

cat numa_maps
2000000000000000 default MaxRef=43 Pages=11 Mapped=11 N0=4 N1=3 N2=2 N3=2
2000000000038000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000040000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
2000000000058000 default MaxRef=43 Pages=61 Mapped=61 N0=14 N1=15 N2=16 N3=16
2000000000268000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000274000 default MaxRef=1 Pages=3 Mapped=3 Anon=3 N0=3
2000000000280000 default MaxRef=8 Pages=3 Mapped=3 N0=3
2000000000300000 default MaxRef=8 Pages=2 Mapped=2 N0=2
2000000000318000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N2=1
4000000000000000 default MaxRef=6 Pages=2 Mapped=2 N1=2
6000000000004000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
6000000000008000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000fff7fffc000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000ffffff44000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1

getty uses ld.so.  The first vma is the code segment which is used by 43
other processes and the pages are evenly distributed over the 4 nodes.

The second vma is the process specific data portion for ld.so.  This is
only one page.

The display format is:

<startaddress>	 Links to information in /proc/<pid>/map
<memory policy>  This can be "default" "interleave={}", "prefer=<node>" or "bind={<zones>}"
MaxRef=		<maximum reference to a page in this vma>
Pages=		<Nr of pages in use>
Mapped=		<Nr of pages with mapcount >
Anon=		<nr of anonymous pages>
Nx=		<Nr of pages on Node x>

The content of the proc-file is self-evident.  If this would be tied into
the sparsemem system then the contents of this file would not be too
useful.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:43 -07:00
Eric Dumazet ba17101b41 [PATCH] sys_set_mempolicy() doesnt check if mode < 0
A kernel BUG() is triggered by a call to set_mempolicy() with a negative
first argument.  This is because the mode is declared as an int, and the
validity check doesnt check < 0 values.  Alternatively, mode could be
declared as unsigned int or unsigned long.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 21:38:00 -07:00
Andi Kleen 90c5029e47 [PATCH] Undo mempolicy shared policy rbtree microoptimization
All mempolicy changes must be inside the spinlock and readding the rb_erase
prevents a crash while doing:

> echo "1" > /tmp/numatest
> numactl --length=0x4000 --shm /tmp/numatest --localalloc
> numactl --length=0x2000 --offset=0 --shm /tmp/numatest --membind=0
> numactl --length=0x2000 --offset=0x2000 --shm /tmp/numatest --membind=1
> ipcs
> ipcrm -M "the_key_value_of_this_shm_area"

Based on a patch by John Blackwood

Cc: <john.blackwood@ccur.com>
Cc: <andrea@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:52 -07:00
Hugh Dickins 91612e0df2 [PATCH] mbind: check_range use standard ptwalk
Strict mbind's check for currently mapped pages being on node has been
using a slow loop which re-evaluates pgd, pud, pmd, pte for each entry:
replace that by a standard four-level page table walk like others in mm.
Since mmap_sem is held for writing, page_table_lock can be taken at the
inner level to limit latency.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:19 -07:00
Hugh Dickins 941150a326 [PATCH] mbind: fix verify_pages pte_page
Strict mbind's check that pages already mapped are on right node has been
using pte_page without checking if pfn_valid, and without page_table_lock
to prevent spurious failures when try_to_unmap_one intervenes between the
pte_present and the pte_page.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:19 -07:00
Christoph Lameter e7c8d5c995 [PATCH] node local per-cpu-pages
This patch modifies the way pagesets in struct zone are managed.

Each zone has a per-cpu array of pagesets.  So any particular CPU has some
memory in each zone structure which belongs to itself.  Even if that CPU is
not local to that zone.

So the patch relocates the pagesets for each cpu to the node that is nearest
to the cpu instead of allocating the pagesets in the (possibly remote) target
zone.  This means that the operations to manage pages on remote zone can be
done with information available locally.

We play a macro trick so that non-NUMA pmachines avoid the additional
pointer chase on the page allocator fastpath.

AIM7 benchmark on a 32 CPU SGI Altix

w/o patches:
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      484.68  100       484.6769     12.01      1.97   Fri Mar 25 11:01:42 2005
  100    27140.46   89       271.4046     21.44    148.71   Fri Mar 25 11:02:04 2005
  200    30792.02   82       153.9601     37.80    296.72   Fri Mar 25 11:02:42 2005
  300    32209.27   81       107.3642     54.21    451.34   Fri Mar 25 11:03:37 2005
  400    34962.83   78        87.4071     66.59    588.97   Fri Mar 25 11:04:44 2005
  500    31676.92   75        63.3538     91.87    742.71   Fri Mar 25 11:06:16 2005
  600    36032.69   73        60.0545     96.91    885.44   Fri Mar 25 11:07:54 2005
  700    35540.43   77        50.7720    114.63   1024.28   Fri Mar 25 11:09:49 2005
  800    33906.70   74        42.3834    137.32   1181.65   Fri Mar 25 11:12:06 2005
  900    34120.67   73        37.9119    153.51   1325.26   Fri Mar 25 11:14:41 2005
 1000    34802.37   74        34.8024    167.23   1465.26   Fri Mar 25 11:17:28 2005

with slab API changes and pageset patch:

Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      485.00  100       485.0000     12.00      1.96   Fri Mar 25 11:46:18 2005
  100    28000.96   89       280.0096     20.79    150.45   Fri Mar 25 11:46:39 2005
  200    32285.80   79       161.4290     36.05    293.37   Fri Mar 25 11:47:16 2005
  300    40424.15   84       134.7472     43.19    438.42   Fri Mar 25 11:47:59 2005
  400    39155.01   79        97.8875     59.46    590.05   Fri Mar 25 11:48:59 2005
  500    37881.25   82        75.7625     76.82    730.19   Fri Mar 25 11:50:16 2005
  600    39083.14   78        65.1386     89.35    872.79   Fri Mar 25 11:51:46 2005
  700    38627.83   77        55.1826    105.47   1022.46   Fri Mar 25 11:53:32 2005
  800    39631.94   78        49.5399    117.48   1169.94   Fri Mar 25 11:55:30 2005
  900    36903.70   79        41.0041    141.94   1310.78   Fri Mar 25 11:57:53 2005
 1000    36201.23   77        36.2012    160.77   1458.31   Fri Mar 25 12:00:34 2005

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Shobhit Dayal <shobhit@calsoftinc.com>
Signed-off-by: Shai Fultheim <Shai@Scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:16 -07:00
Al Viro 01424961e6 [PATCH] mempolicy.c GFP fix
zonelist_policy() forgot to mask non-zone bits from gfp when comparing
zone number with policy_zone. 

ACKed-by: Andi Kleen <ak@suse.de>
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-24 12:28:34 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00