Commit Graph

37381 Commits

Author SHA1 Message Date
Bob Moore 15b8dd53f5 ACPICA: Major update for acpi_get_object_info external interface
Completed a major update for the acpi_get_object_info external interface.
Changes include:
 - Support for variable, unlimited length HID, UID, and CID strings
 - Support Processor objects the same as Devices (HID,UID,CID,ADR,STA, etc.)
 - Call the _SxW power methods on behalf of a device object
 - Determine if a device is a PCI root bridge
 - Change the ACPI_BUFFER parameter to ACPI_DEVICE_INFO.
These changes will require an update to all callers of this interface.
See the ACPICA Programmer Reference for details.

Also, update all invocations of acpi_get_object_info interface

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:15 -04:00
Linus Torvalds b04e6373d6 x86: don't call '->send_IPI_mask()' with an empty mask
As noted in 83d349f35e ("x86: don't send
an IPI to the empty set of CPU's"), some APIC's will be very unhappy
with an empty destination mask.  That commit added a WARN_ON() for that
case, and avoided the resulting problem, but didn't fix the underlying
reason for why those empty mask cases happened.

This fixes that, by checking the result of 'cpumask_andnot()' of the
current CPU actually has any other CPU's left in the set of CPU's to be
sent a TLB flush, and not calling down to the IPI code if the mask is
empty.

The reason this started happening at all is that we started passing just
the CPU mask pointers around in commit 4595f9620 ("x86: change
flush_tlb_others to take a const struct cpumask"), and when we did that,
the cpumask was no longer thread-local.

Before that commit, flush_tlb_mm() used to create it's own copy of
'mm->cpu_vm_mask' and pass that copy down to the low-level flush
routines after having tested that it was not empty.  But after changing
it to just pass down the CPU mask pointer, the lower level TLB flush
routines would now get a pointer to that 'mm->cpu_vm_mask', and that
could still change - and become empty - after the test due to other
CPU's having flushed their own TLB's.

See

	http://bugzilla.kernel.org/show_bug.cgi?id=13933

for details.

Tested-by: Thomas Björnell <thomas.bjornell@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-21 09:48:10 -07:00
Linus Torvalds 83d349f35e x86: don't send an IPI to the empty set of CPU's
The default_send_IPI_mask_logical() function uses the "flat" APIC mode
to send an IPI to a set of CPU's at once, but if that set happens to be
empty, some older local APIC's will apparently be rather unhappy.  So
just warn if a caller gives us an empty mask, and ignore it.

This fixes a regression in 2.6.30.x, due to commit 4595f9620 ("x86:
change flush_tlb_others to take a const struct cpumask"), documented
here:

	http://bugzilla.kernel.org/show_bug.cgi?id=13933

which causes a silent lock-up.  It only seems to happen on PPro, P2, P3
and Athlon XP cores.  Most developers sadly (or not so sadly, if you're
a developer..) have more modern CPU's.  Also, on x86-64 we don't use the
flat APIC mode, so it would never trigger there even if the APIC didn't
like sending an empty IPI mask.

Reported-by: Pavel Vilim <wylda@volny.cz>
Reported-and-tested-by: Thomas Björnell <thomas.bjornell@gmail.com>
Reported-and-tested-by: Martin Rogge <marogge@onlinehome.de>
Cc: Mike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-21 09:23:57 -07:00
Linus Torvalds 4aa2d56b21 Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Update Microblaze defconfigs
  microblaze: Use klimit instead of _end for memory init
  microblaze: Enable ppoll syscall
  microblaze: Sane handling of missing timer/intc in device tree
  microblaze: use the generic ack_bad_irq implementation
2009-08-19 09:44:51 -07:00
Linus Torvalds 77f312a96d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: use the right flag for get_vm_area()
  percpu, sparc64: fix sparse possible cpu map handling
  init: set nr_cpu_ids before setup_per_cpu_areas()
2009-08-18 19:41:05 -07:00
Linus Torvalds dc8ed71eeb Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Don't initialize MCEs on unknown CPUs
  x86, mce: don't log boot MCEs on Pentium M (model == 13) CPUs
  x86: Annotate section mismatch warnings in kernel/apic/x2apic_uv_x.c
  x86, mce: therm_throt: Don't log redundant normality
  x86: Fix UV BAU destination subnode id
2009-08-18 16:55:43 -07:00
Linus Torvalds b9d030a123 Merge branch 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: sh7724 ddr self-refresh changes
  sh: use in-soc KEYSC on se7724
  sh: CMT suspend/resume
  sh: skip disabled LCDC channels
2009-08-18 13:54:26 -07:00
Michal Simek 1fef789175 microblaze: Update Microblaze defconfigs
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-08-18 11:05:11 +02:00
Michal Simek 8f37b6c985 microblaze: Use klimit instead of _end for memory init
For noMMU system when you use larger rootfs image
there is problem with using _end label because
we increase klimit but in memory initialization
we use still _end which is wrong. Larger mtd rootfs
was rewritten by init_bootmem_node.

MMU kernel use static initialization where klimit
is setup to _end. There is no any other hanling
with klimit.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-08-18 10:34:12 +02:00
Michal Simek 2856ed35ea microblaze: Enable ppoll syscall
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-08-18 10:33:31 +02:00
John Williams 892ee92b81 microblaze: Sane handling of missing timer/intc in device tree
This code path doesn't test any returned pointers for NULL, leading to a bad
kernel page fault if there's no timer/intc found.

Slightly better is to BUG(), but even better still would be a printk beforehand.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-08-18 10:33:30 +02:00
Christoph Hellwig 6b99ecec25 microblaze: use the generic ack_bad_irq implementation
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-08-18 10:33:29 +02:00
Linus Torvalds df4ecf1524 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Fix HPAGE_SIZE redefinition
2009-08-17 13:39:52 -07:00
Linus Torvalds 0f66f96d21 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (37 commits)
  ARM: 5673/1: U300 fix initsection compile warning
  ARM: Fix broken highmem support
  mx31moboard: invert sdhc ro signal sense
  ARM: S3C24XX: Fix clkout mpx error
  ARM: S3C64XX: serial: Fix a typo in Kconfig
  IXP4xx: Fix IO_SPACE_LIMIT for 2.6.31-rc core PCI changes
  OMAP3: RX51: Updated rx51_defconfig
  OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up
  OMAP3: RX51: Define TWL4030 USB transceiver in board file
  OMAP3: Overo: Fix smsc911x platform device resource value
  OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after increasing vmalloc size
  OMAP2/3: DMA errata correction
  OMAP: Fix testing of cpu defines for mach-omap1
  OMAP3: Overo: add missing pen-down GPIO definition
  OMAP: GPIO: clear/restore level/edge detect settings on mask/unmask
  OMAP3: PM: Fix wrong sequence in suspend.
  OMAP: PM: CPUfreq: obey min/max settings of policy
  OMAP2/3/4: UART: allow in-order port traversal
  OMAP2/3/4: UART: Allow per-UART disabling wakeup for serial ports
  OMAP3: Fixed crash bug with serial + suspend
  ...
2009-08-17 13:36:39 -07:00
Atsushi Nemoto 87c62a66ed MIPS: Fix HPAGE_SIZE redefinition
This patch fixes warnings like this:
  CC      fs/proc/meminfo.o
In file included from /work/linux/include/linux/mmzone.h:20,
                 from /work/linux/include/linux/gfp.h:4,
                 from /work/linux/include/linux/mm.h:8,
                 from /work/linux/fs/proc/meminfo.c:5:
/work/linux/arch/mips/include/asm/page.h:36:1: warning: "HPAGE_SIZE" redefined
In file included from /work/linux/fs/proc/meminfo.c:2:
/work/linux/include/linux/hugetlb.h:107:1: warning: this is the location of the previous definition

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-17 17:27:57 +01:00
Ingo Molnar e412cd257e x86, mce: Don't initialize MCEs on unknown CPUs
An older test-box started hanging at the following point during
bootup:

 [    0.022996] Mount-cache hash table entries: 512
 [    0.024996] Initializing cgroup subsys debug
 [    0.025996] Initializing cgroup subsys cpuacct
 [    0.026995] Initializing cgroup subsys devices
 [    0.027995] Initializing cgroup subsys freezer
 [    0.028995] mce: CPU supports 5 MCE banks

I've bisected it down to commit 4efc0670 ("x86, mce: use 64bit
machine check code on 32bit"), which utilizes the MCE code on
32-bit systems too.

The problem is caused by this detail in my config:

  # CONFIG_CPU_SUP_INTEL is not set

This disables the quirks in mce_cpu_quirks() but still enables
MCE support - which then hangs due to the missing quirk
workaround needed on this CPU:

	if (c->x86 == 6 && c->x86_model < 0x1A && banks > 0)
		mce_banks[0].init = 0;

The safe solution is to not initialize MCEs if we dont know on
what CPU we are running (or if that CPU's support code got
disabled in the config).

Also be a bit more defensive on 32-bit systems: dont do a
boot-time dump of pending MCEs not just on the specific system
that we found a problem with (Pentium-M), but earlier ones as
well.

Now this problem is probably not common and disabling CPU
support is rare - but still being more defensive in something
we turned on for a wide range of CPUs is prudent.

Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
LKML-Reference: Message-ID: <4A88E3E4.40506@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 13:28:25 +02:00
Bartlomiej Zolnierkiewicz c7f6fa4411 x86, mce: don't log boot MCEs on Pentium M (model == 13) CPUs
On my legacy Pentium M laptop (Acer Extensa 2900) I get bogus MCE on a cold
boot with CONFIG_X86_NEW_MCE enabled, i.e. (after decoding it with mcelog):

MCE 0
HARDWARE ERROR. This is *NOT* a software problem!
Please contact your hardware vendor
CPU 0 BANK 1 MCG status:
MCi status:
Error overflow
Uncorrected error
Error enabled
Processor context corrupt
MCA: Data CACHE Level-1 UNKNOWN Error
STATUS f200000000000195 MCGSTATUS 0

[ The other STATUS values observed: f2000000000001b5 (... UNKNOWN error)
  and f200000000000115 (... READ Error).

  To verify that this is not a CONFIG_X86_NEW_MCE bug I also modified
  the CONFIG_X86_OLD_MCE code (which doesn't log any MCEs) to dump
  content of STATUS MSR before it is cleared during initialization. ]

Since the bogus MCE results in a kernel taint (which in turn disables
lockdep support) don't log boot MCEs on Pentium M (model == 13) CPUs
by default ("mce=bootlog" boot parameter can be be used to get the old
behavior).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 10:17:02 +02:00
Leonardo Potenza 52459ab913 x86: Annotate section mismatch warnings in kernel/apic/x2apic_uv_x.c
The function uv_acpi_madt_oem_check() has been marked __init,
the struct apic_x2apic_uv_x has been marked __refdata.

The aim is to address the following section mismatch messages:

WARNING: arch/x86/kernel/apic/built-in.o(.data+0x1368): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary()
The variable apic_x2apic_uv_x references
the function __cpuinit uv_wakeup_secondary()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: arch/x86/kernel/built-in.o(.data+0x68e8): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary()
The variable apic_x2apic_uv_x references
the function __cpuinit uv_wakeup_secondary()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: arch/x86/built-in.o(.text+0x7b36f): Section mismatch in reference from the function uv_acpi_madt_oem_check() to the function .init.text:early_ioremap()
The function uv_acpi_madt_oem_check() references
the function __init early_ioremap().
This is often because uv_acpi_madt_oem_check lacks a __init
annotation or the annotation of early_ioremap is wrong.

WARNING: arch/x86/built-in.o(.text+0x7b38d): Section mismatch in reference from the function uv_acpi_madt_oem_check() to the function .init.text:early_iounmap()
The function uv_acpi_madt_oem_check() references
the function __init early_iounmap().
This is often because uv_acpi_madt_oem_check lacks a __init
annotation or the annotation of early_iounmap is wrong.

WARNING: arch/x86/built-in.o(.data+0x8668): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary()
The variable apic_x2apic_uv_x references
the function __cpuinit uv_wakeup_secondary()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Leonardo Potenza <lpotenza@inwind.it>
LKML-Reference: <200908161855.48302.lpotenza@inwind.it>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16 19:44:13 +02:00
Hugh Dickins 4e5c25d405 x86, mce: therm_throt: Don't log redundant normality
0d01f31439 "x86, mce: therm_throt
- change when we print messages" removed redundant
announcements of "Temperature/speed normal".

They're not worth logging and remove their accompanying
"Machine check events logged" messages as well from the
console.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
LKML-Reference: <Pine.LNX.4.64.0908161544100.7929@sister.anvils>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16 17:25:41 +02:00
Linus Walleij a2bb9f4d6a ARM: 5673/1: U300 fix initsection compile warning
The u300_init_check_chip() function was not properly tagged with
the __init macro and provided a initsection mismatch on
compilation.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 15:36:52 +01:00
Russell King 824df399a3 Merge branch 's3c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux 2009-08-15 12:43:13 +01:00
Russell King 8b61207895 Merge branch 'for-rmk-rc' of git://git.pengutronix.de/git/imx/linux-2.6 2009-08-15 12:42:46 +01:00
Russell King dde5828f56 ARM: Fix broken highmem support
Currently, highmem is selectable, and you can request an increased
vmalloc area.  However, none of this has any effect on the memory
layout since a patch in the highmem series was accidentally dropped.
Moreover, even if you did want highmem, all memory would still be
registered as lowmem, possibly resulting in overflow of the available
virtual mapping space.

The highmem boundary is determined by the highest allowed beginning
of the vmalloc area, which depends on its configurable minimum size
(see commit 60296c71f6 for details on
this).

We should create mappings and initialize bootmem only for low memory,
while the zone allocator must still be told about highmem.

Currently, memory nodes which are completely located in high memory
are not supported.  This is not a huge limitation since systems
relying on highmem support are unlikely to have discontiguous memory
with large holes.

[ A similar patch was meant to be merged before commit 5f0fbf9eca
  and be available  in Linux v2.6.30, however some git rebase screw-up
  of mine dropped the first commit of the series, and that goofage
  escaped testing somehow as well. -- Nico ]

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Nicolas Pitre <nico@marvell.com>
2009-08-15 12:36:00 +01:00
Cliff Wickman 3ef12c3c97 x86: Fix UV BAU destination subnode id
The SGI UV Broadcast Assist Unit is used to send TLB shootdown
messages to remote nodes of the system.  The header of the
message must contain the subnode id of the block in the
receiving hub that handles such messages.  It should always be
0x10, the id of the "LB" block.

It had previously been documented as a "must be zero" field.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Acked-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <E1Mc1x7-0005Ce-6t@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 11:58:02 +02:00
Magnus Damm 237674e050 sh: sh7724 ddr self-refresh changes
This patch updates the SuperH Mobile sleep assembly code with
support for DBSC memory controller found in the sh7724 processor.

Without this fix the memory hooked up to the sh7724 processor
will never enter self-refresh mode before suspending to ram. The
effect of this is that the memory contents most likeley will be
lost upon resume which may or may not be what you want.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15 12:58:50 +09:00
Magnus Damm 9747e78b30 sh: use in-soc KEYSC on se7724
This patch updates the Solution Engine 7724 board code to use
in-SoC KEYSC resources for the keyboard platform device. Using
the in-SoC key scan controller fixes a crash-during-resume issue.

Without this patch the KEYSC hardware block located in the board
specific FPGA is used together with an external IRQ which is
routed through the FPGA and handled by some board specific demux
code. This board specific FPGA interrupt code does not implement
desc->set_wake() so the enable_irq_wake() call in the sh_keysc
driver will fail at suspend-to-ram time and the disable_irq_wake()
will bomb out when resuming.

Changing the platform data to use the in-SoC KEYSC hardware makes
the se7724 board support code less special which is a good thing.
Also, the board specific KEYSC pin setup code selects in-SoC pin
functions already which makes the current FPGA platform device data
look like a typo.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15 12:58:47 +09:00
Valentin Longchamp 563abb4be1 mx31moboard: invert sdhc ro signal sense
Small confusion with our hardware engineer, the WP signal (RO) is
active low on our boards, the signal has to inverted.

This is a pretty straightforward patch, it could even go to -rc,
but if not, then push it for 2.6.32.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:33:23 +02:00
Tejun Heo 74d46d6b2d percpu, sparc64: fix sparse possible cpu map handling
percpu code has been assuming num_possible_cpus() == nr_cpu_ids which
is incorrect if cpu_possible_map contains holes.  This causes percpu
code to access beyond allocated memories and vmalloc areas.  On a
sparc64 machine with cpus 0 and 2 (u60), this triggers the following
warning or fails boot.

 WARNING: at /devel/tj/os/work/mm/vmalloc.c:106 vmap_page_range_noflush+0x1f0/0x240()
 Modules linked in:
 Call Trace:
  [00000000004b17d0] vmap_page_range_noflush+0x1f0/0x240
  [00000000004b1840] map_vm_area+0x20/0x60
  [00000000004b1950] __vmalloc_area_node+0xd0/0x160
  [0000000000593434] deflate_init+0x14/0xe0
  [0000000000583b94] __crypto_alloc_tfm+0xd4/0x1e0
  [00000000005844f0] crypto_alloc_base+0x50/0xa0
  [000000000058b898] alg_test_comp+0x18/0x80
  [000000000058dad4] alg_test+0x54/0x180
  [000000000058af00] cryptomgr_test+0x40/0x60
  [0000000000473098] kthread+0x58/0x80
  [000000000042b590] kernel_thread+0x30/0x60
  [0000000000472fd0] kthreadd+0xf0/0x160
 ---[ end trace 429b268a213317ba ]---

This patch fixes generic percpu functions and sparc64
setup_per_cpu_areas() so that they handle sparse cpu_possible_map
properly.

Please note that on x86, cpu_possible_map() doesn't contain holes and
thus num_possible_cpus() == nr_cpu_ids and this patch doesn't cause
any behavior difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
2009-08-14 13:20:53 +09:00
Davide Rizzo 48ec45e725 ARM: S3C24XX: Fix clkout mpx error
Bug correction: CLK Outputs cannot have XTAL as parent

Signed-off-by: Davide Rizzo <elpa.rizzo@gmail.com>
[ben-linux@fluff.org: updated patch subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-14 00:45:49 +01:00
Linus Torvalds 3493e84de6 Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_counter: Report the cloning task as parent on perf_counter_fork()
  perf_counter: Fix an ipi-deadlock
  perf: Rework/fix the whole read vs group stuff
  perf_counter: Fix swcounter context invariance
  perf report: Don't show unresolved DSOs and symbols when -S/-d is used
  perf tools: Add a general option to enable raw sample records
  perf tools: Add a per tracepoint counter attribute to get raw sample
  perf_counter: Provide hw_perf_counter_setup_online() APIs
  perf list: Fix large list output by using the pager
  perf_counter, x86: Fix/improve apic fallback
  perf record: Add missing -C option support for specifying profile cpu
  perf tools: Fix dso__new handle() to handle deleted DSOs
  perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available
  perf report: Show the tid too in -D
  perf record: Fix .tid and .pid fill-in when synthesizing events
  perf_counter, x86: Fix generic cache events on P6-mobile CPUs
  perf_counter, x86: Fix lapic printk message
2009-08-13 12:24:33 -07:00
Linus Torvalds 1c2ffff407 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix oops in identify_cpu() on CPUs without CPUID
  x86: Clear incorrectly forced X86_FEATURE_LAHF_LM flag
  x86, mce: therm_throt - change when we print messages
  x86: Add reboot quirk for every 5 series MacBook/Pro
2009-08-13 12:08:44 -07:00
Russell King 3b3119fc54 Merge branch 'ixp4xx-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 2009-08-13 09:55:38 +01:00
Magnus Damm dbefd606a3 sh: fix i2c init order on ap325rxa V2
Convert the AP325RXA board code to register devices at
arch_initcall() time instead of device_initcall(). This
fix unbreaks pcf8563 RTC driver support.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-13 11:43:43 +09:00
Magnus Damm ba3a170191 sh: fix i2c init order on Migo-R V2
Convert the Migo-R board code to register devices at
arch_initcall() time instead of __initcall(). This fix
unbreaks migor_ts touch screen driver support.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-13 11:39:02 +09:00
Magnus Damm ba9a633787 sh: convert processor device setup functions to arch_initcall()
Convert the processor platform device setup
functions from __initcall() and sometimes
device_initcall() to arch_initcall().

This makes sure that the platform devices are
registered a bit earlier so the devices are
available when drivers register using initcall
levels earlier than device_initcall().

A good example is platform devices needed by
i2c-sh_mobile.c which registers a bit earlier
using subsys_initcall().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-13 11:36:33 +09:00
Ingo Molnar 04da8a43da perf_counter, x86: Fix/improve apic fallback
Johannes Stezenbach reported that his Pentium-M based
laptop does not have the local APIC enabled by default,
and hence perfcounters do not get initialized.

Add a fallback for this case: allow non-sampled counters
and return with an error on sampled counters. This allows
'perf stat' to work out of box - and allows 'perf top'
and 'perf record' to fall back on a hrtimer based sampling
method.

( Passing 'lapic' on the boot line will allow hardware
  sampling to occur - but if the APIC is disabled
  permanently by the hardware then this fallback still
  allows more systems to use perfcounters. )

Also decouple perfcounter support from X86_LOCAL_APIC.

-v2: fix typo breaking counters on all other systems ...

Reported-by: Johannes Stezenbach <js@sig21.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-12 14:12:49 +02:00
Ondrej Zary e8055139d9 x86: Fix oops in identify_cpu() on CPUs without CPUID
Kernel is broken for x86 CPUs without CPUID since 2.6.28. It
crashes with NULL pointer dereference in identify_cpu():

766        generic_identify(c);
767
768-->     if (this_cpu->c_identify)
769               this_cpu->c_identify(c);

this_cpu is NULL. This is because it's only initialized in
get_cpu_vendor() function, which is not called if the CPU has
no CPUID instruction.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
LKML-Reference: <200908112000.15993.linux@rainbow-software.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-12 11:49:41 +02:00
Roel Kluin e7369e01eb arch/ia64/kernel/iosapic: missing test after ioremap()
Missing test after ioremap()

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
2009-08-11 14:52:11 -07:00
Fenghua Yu 5359dffd43 ia64/topology.c: exit cache_add_dev when kobject_init_and_add fails
Make cache_add_dev exit sysfs when kobject_init_and_add returns an error.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
2009-08-11 14:52:11 -07:00
Fenghua Yu bf2a4c7270 arch/ia64/Makefile: Remove -mtune=merced in IA64 kernel build
Between GCC version 3.4.0 and 4.3.3 (including 3.4.0 and 4.3.3), -mtune=merced
is implemented in GCC. Starting from 4.4.0, -mtune=merced is deprecated.

Even implemented in versions between 3.4.0 and 4.3.3, the -mtune=merced
feature has been broken in some of the versions. For example, GCC 4.1.2 reports
interanl tuning function errors during kernel building with -mtune=merced. Or
GCC Bugzilla 16130 reports another -mtune=merced issue on GCC 3.4.1.

So I would remove the -mtune=merced from IA64 kernel build. Without this option,
kernel on Merced will remain the same except losing an unstable and out-of-date
performance tunning feature.

Since GCC version 3.4.0, -mtune=mckinley has been implemented. The
-mtune=mckinley option functions the same as mtune=itanium2. And mtune=itanium2
is the default option. So we don't need to add mtune=mckinley either since its
been the default option in any GCC version which implements this option.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
2009-08-11 14:52:11 -07:00
Jaswinder Singh Rajput b5a8879347 IA64: includecheck fix: ia64, pgtable.h
fix the following 'make includecheck' warning:

  arch/ia64/include/asm/pgtable.h: asm/processor.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
2009-08-11 14:52:11 -07:00
Jaswinder Singh Rajput cfa5f809e3 IA64: includecheck fix: ia64, ia64_ksyms.c
fix the following 'make includecheck' warning:

  arch/ia64/kernel/ia64_ksyms.c: asm/page.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
2009-08-11 14:52:10 -07:00
Johannes Weiner 8d6f9af919 ia64: boolean __test_and_clear_bit
__test_and_clear_bit() returns a bitfield with the tested-for bit set.
Make it consistent with the other bitops - of ia64 but also every
other architecture - and return a boolean value.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
2009-08-11 14:52:10 -07:00
Fenghua Yu 51b89f7a66 Bug Fix arch/ia64/kernel/pci-dma.c: fix recursive dma_supported() call in iommu_dma_supported()
In commit 160c1d8e40,
dma_ops->dma_supported = iommu_dma_supported;

This dma_ops->dma_supported is first called in platform_dma_init() during kernel
boot. Then dma_ops->dma_supported will be called recursively in
iommu_dma_supported.

Kernel can not boot because kernel can not get out of iommu_dma_supported until
it runs out of stack memory.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
2009-08-11 14:52:10 -07:00
Mikael Pettersson dee2b904a1 IXP4xx: Fix IO_SPACE_LIMIT for 2.6.31-rc core PCI changes
2.6.31-rc kernels don't boot on my ixp4xx box (ds101), because the libata
driver doesn't find the PCI IDE controller any more. 2.6.30 was fine.
I traced this to a PCI update (1f82de10d6)
in 2.6.30-git19. Diffing the kernel boot logs from 2.6.30-git18 and
2.6.30-git19 illustrates the breakage:

> --- dmesg-2.6.30-git18	2009-08-04 01:45:22.000000000 +0200
> +++ dmesg-2.6.30-git19	2009-08-04 01:45:46.000000000 +0200
> @@ -26,6 +26,13 @@
>  pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot
>  pci 0000:00:02.2: PME# disabled
>  PCI: bus0: Fast back to back transfers disabled
> +pci 0000:00:01.0: BAR 0: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 1: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 2: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 3: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 4: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:02.0: BAR 4: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:02.1: BAR 4: can't allocate I/O resource [0x10000-0xffff]
>  bio: create slab <bio-0> at 0
>  SCSI subsystem initialized
>  NET: Registered protocol family 2
> @@ -44,11 +51,7 @@
>  console [ttyS0] enabled
>  serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
>  Driver 'sd' needs updating - please use bus_type methods
> -PCI: enabling device 0000:00:01.0 (0140 -> 0141)
> -scsi0 : pata_artop
> -scsi1 : pata_artop
> -ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1060 bmdma 0x1040 irq 28
> -ata2: PATA max UDMA/100 cmd 0x1058 ctl 0x1064 bmdma 0x1048 irq 28
> +pata_artop 0000:00:01.0: no available native port
>  Using configured DiskOnChip probe address 0x50000000
>  DiskOnChip found at 0x50000000
>  NAND device: Manufacturer ID: 0x98, Chip ID: 0x73 (Toshiba NAND 16MiB 3,3V 8-bit)

The specific change in 1f82de10d6 responsible
for this failure turned out to be the following:

> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -193,7 +193,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
>  		res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
>  		if (type == pci_bar_io) {
>  			l &= PCI_BASE_ADDRESS_IO_MASK;
> -			mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff;
> +			mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT;
>  		} else {
>  			l &= PCI_BASE_ADDRESS_MEM_MASK;
>  			mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;

Every arch except arm's ixp4xx defines IO_SPACE_LIMIT as an all-bits-one
bitmask, typically -1UL but sometimes only a 16-bit 0x0000ffff. But ixp4xx
defines it as 0xffff0000, which is now causing the PCI failures.

Russell King noted that ixp4xx has 64KB PCI IO space, so IO_SPACE_LIMIT
should be 0x0000ffff. This patch makes that change, which fixes the PCI
failures on my ixp4xx box.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-08-11 19:22:20 +02:00
Kevin Winchester fbd8b1819e x86: Clear incorrectly forced X86_FEATURE_LAHF_LM flag
Due to an erratum with certain AMD Athlon 64 processors, the
BIOS may need to force enable the LAHF_LM capability.
Unfortunately, in at least one case, the BIOS does this even
for processors that do not support the functionality.

Add a specific check that will clear the feature bit for
processors known not to support the LAHF/SAHF instructions.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Acked-by: Borislav Petkov <petkovbb@googlemail.com>
LKML-Reference: <4A80A5AD.2000209@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-11 13:34:54 +02:00
Ingo Molnar f64ccccb8a perf_counter, x86: Fix generic cache events on P6-mobile CPUs
Johannes Stezenbach reported that 'perf stat' does not count
cache-miss and cache-references events on his Pentium-M based
laptop.

This is because we left them blank in p6_perfmon_event_map[],
fill them in.

Reported-by: Johannes Stezenbach <js@sig21.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-11 11:35:26 +02:00
Ingo Molnar 3c581a7f94 perf_counter, x86: Fix lapic printk message
Instead of this garbled bootup on UP Pentium-M systems:

[    0.015048] Performance Counters:
[    0.016004] no Local APIC, try rebooting with lapicno PMU driver, software counters only.

Print:

[    0.015050] Performance Counters:
[    0.016004] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.017003] no PMU driver, software counters only.

Cf: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-11 10:58:25 +02:00
Dmitry Torokhov 0d01f31439 x86, mce: therm_throt - change when we print messages
My Latitude d630 seems to be handling thermal events in SMI by
lowering the max frequency of the CPU till it cools down but
still leaks the "everything is normal" events.

This spams the console and with high priority printks.

Adjust therm_throt driver to only print messages about the fact
that temperatire returned back to normal when leaving the
throttling state.

Also lower the severity of "back to normal" message from
KERN_CRIT to KERN_INFO.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <20090810051513.0558F526EC9@mailhub.coreip.homeip.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-11 09:54:17 +02:00
Shunichi Fuji 3e03bbeac5 x86: Add reboot quirk for every 5 series MacBook/Pro
Reboot does not work on my MacBook Pro 13 inch (MacBookPro5,5)
too. It seems all unibody MacBook and MacBookPro require
PCI reboot handling, i guess.

Following model/machine ID list shows unibody MacBook/Pro have
the 5 series of model number:

   http://www.everymac.com/systems/by_capability/macs-by-machine-model-machine-id.html

Signed-off-by: Shunichi Fuji <palglowr@gmail.com>
Cc: Ozan Çağlayan <ozan@pardus.org.tr>
LKML-Reference: <30046e3b0908101134p6487ddbftd8776e4ddef204be@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10 20:59:42 +02:00