Commit Graph

91 Commits

Author SHA1 Message Date
Russell King 2a2d10f386 Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable 2010-02-25 20:41:34 +00:00
John Holland d5b5746bed [ARM] eSATA SheevaPlug: correlate MPP to SD CD and SD WP
Accept SD CD and SD WP in accordance to
http://plugcomputer.org/data/docs/Sheeva-PowerPlug-V1.3-GTI-090906.pdf
on MPP 47 and 44 respectively on the eSATA SheevaPlug

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
--
2010-02-23 16:44:01 -05:00
John Holland d7b222d708 [ARM] eSATA SheevaPlug: configure SoC SATA interface
Enable the kirkwood SATA SoC interface on the eSATA SheevaPlug.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
--
2010-02-23 16:44:01 -05:00
John Holland d8ecb34900 [ARM] eSATA SheevaPlug basic board support
Allow basic eSATA SheevaPlug board configuration and build.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
--
2010-02-23 16:44:00 -05:00
Simon Guinot 1afeea84bd [ARM] Kirkwood: define SATA LED for netspace_v2
This patch add a GPIO LED named "ns_v2:blue:sata" which can be used to
enable or disable SATA activity LED blinking.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-09 21:05:49 -05:00
Simon Guinot ca9cea9399 [ARM] Kirkwood: add LaCie Internet Space v2 support
The Internet and Network Space v2 boards are very close. The only
difference is that there is no USB type B plug wired on the Internet
Space v2.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-09 20:54:49 -05:00
Alexander Clouter b2fdb5660f [ARM] kirkwood: combine support for openrd base/client support
Inspired by the mach-ep93xx flattening work, there is really not
much difference between the OpenRD base and client board support
so they should be merged together.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Acked-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-02-05 00:27:04 -05:00
H Hartley Sweeten 3e3e65fc42 mach-kirkwood/common.c: remove unnecessary (void *) casts
The (void *) cast is not needed when setting dev.platform_data to the
address of the data. Remove the casts.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-04 21:29:27 -05:00
Saeed Bishara 81143d2a65 [ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-01-10 22:23:43 -05:00
Simon Guinot 1cb9f9b086 [ARM] Kirkwood: Add LaCie Network Space v2 support
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-12-10 23:01:57 -05:00
Martin Michlmayr 8d27b2f798 [ARM] Kirkwood: Remove code duplication in QNAP setup files
Remove the code duplication found in the setup files of TS-219 and
TS-41x.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13 12:14:24 -05:00
Martin Michlmayr 287989cac2 [ARM] Kirkwood: Add QNAP TS-110/TS-210 to Kconfig help text
Add two new models from QNAP to the help text.  They are compatible
with the TS-119/TS-219 and therefore supported by the current code.
The only difference is that they have less RAM (256 MB instead of
512 MB), a slower CPU (800 MHz vs 1.2 GHz) and a plastic case.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13 12:14:24 -05:00
Martin Michlmayr b421950cdc [ARM] Kirkwood: Add MPP36 for QNAP TS-11x/TS-21x
MPP36 is used on the QNAP TS-11x/TS-21x devices to indicate how
much RAM there is: it's high for 512 MB RAM (TS-x19) and low for
256 MB (TS-x10).  While this may not be very useful, let's add
it for completeness.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13 12:14:23 -05:00
Martin Michlmayr f3a131b90b [ARM] Kirkwood: Add support for QNAP TS-41x Turbo NAS
Add support for the QNAP TS-410, TS-410U, TS-419P and TS-419U
Turbo NAS.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13 12:14:23 -05:00
Lennert Buytenhek 2bf3010843 [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus
Disable propagation of mbus errors to the CPU local bus, as this causes
mbus errors (which can occur for example for PCI aborts) to throw CPU
aborts, which we're not set up to deal with.

Reported-by: Dieter Kiermaier <dk-arm-linux@gmx.de>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13 12:14:23 -05:00
Lennert Buytenhek a1897fa67c [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-07 20:18:24 -05:00
Lennert Buytenhek 35f029e251 [ARM] kirkwood: fix PCI I/O port assignment
Instead of allocating PCI devices I/O port bus addresses from the
000xxxxx I/O port range as intended, due to a bus versus physical
address mixup, the Kirkwood PCIe handling code inadvertently
allocated I/O port bus addresses from the f20xxxxx address range
(which is the physical address range of the PCIe I/O mapping window),
but then direct all I/O port accesses to bus addresses 000xxxxx,
which would then not be decoded at all.

Fix this by setting the base address of the PCIe I/O space struct
resource to KIRKWOOD_PCIE_IO_BUS_BASE instead of the incorrect
KIRKWOOD_PCIE_IO_PHYS_BASE, and fix up __io() to expect addresses
offsetted by the former instead of the latter.

(The suggested fix of directing I/O port accesses from the host to
bus addresses f20xxxxx instead has the problem that assigning full
32bit I/O port bus addresses (f20xxxxx) doesn't work on all PCI
devices, as not all PCI devices implement full 32 bit BAR registers
for I/O ports.  We should really try to allocate I/O port bus
addresses that fit in 16 bits.)

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-07 20:14:21 -05:00
Li Jie 6de95c1987 [ARM] kirkwood: fix section mismatch
kirkwood_timer_init() and kirkwood_pcie_setup() lack of __init which
causes following warnings:

WARNING: vmlinux.o(.text+0x9568): Section mismatch in reference from
the function kirkwood_timer_init() to the function
.init.text:kirkwood_find_tclk()
The function kirkwood_timer_init() references
the function __init kirkwood_find_tclk().
This is often because kirkwood_timer_init lacks a __init
annotation or the annotation of kirkwood_find_tclk is wrong.

WARNING: vmlinux.o(.text+0x979c): Section mismatch in reference from
the function kirkwood_pcie_setup() to the function
.init.text:orion_pcie_setup()
The function kirkwood_pcie_setup() references
the function __init orion_pcie_setup().
This is often because kirkwood_pcie_setup lacks a __init
annotation or the annotation of orion_pcie_setup is wrong.

Signed-off-by: lijie <eltshanli@gmail.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2009-11-05 23:03:21 -05:00
Simon Kagstrom 5d89655573 [ARM] OpenRD base: Initialize PCI express and i2c
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Dieter Kiermaier <dk-arm-linux@gmx.de>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-05 23:03:20 -05:00
Russell King 87d721ad7a Merge branch 'master' into devel 2009-09-12 12:04:37 +01:00
John Holland c55bf102b6 [ARM] Kirkwood: enable eSATA on QNAP TS-219P
Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware
allowing the use of the discrete eSATA controller connected to the PCIe
bus in the TS-219P.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Tested-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-24 11:56:00 -04:00
Ron Lee decf770795 [ARM] Kirkwood: Initialise SATA for OpenRD-Base
Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-10 18:04:00 -04:00
Dhaval Vasa 7eeae54c68 [ARM] Kirkwood: Marvell OpenRD-Base board support
reference:
http://open-rd.org
http://code.google.com/p/openrd

This patch is tested for:
1. Boot from DRAM/NAND flash
2. NAND read/write/erase
3. GbE0
4. USB read/write

FIXME:
1. SD/UART1 selection
2. MPP configuration (currently, default)
3. PEX

Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-10 18:03:59 -04:00
Siddarth Gore aec1bad326 [ARM] Kirkwood: Add support for 6281-A1
Signed-off-by: Siddarth Gore <gores@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-10 18:03:59 -04:00
Simon Kagstrom e2ce0e718e [ARM] Kirkwood: Correct header define
Correct define typo (. -> ,)

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-07-06 23:54:56 -04:00
Nicolas Pitre ae5c8c8373 [ARM] Kirkwood: platform device registration for the crypto engine
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:05:03 -04:00
Nicolas Pitre c1191b0e3b [ARM] Kirkwood: create a mapping for the Security Accelerator SRAM
Always creating the physical mapping should do no harm, so let's remove
the interface that was provided for its optional creation and make the
mapping static.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:05:02 -04:00
Nicolas Pitre fc63b7239a [ARM] Kirkwood: let's use real size for resources
We don't have to define resources to the minimal physical window size
as setup_cpu_win() will cope with smaller sizes already.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:05:01 -04:00
Nicolas Pitre 3b937a7dbd [ARM] Orion/Kirkwood: rename orion5x_wdt to orion_wdt
The Orion watchdog driver is also used on Kirkwood.

Convention is to use orion5x for stuff specific to 88F5xxx Orion chips
and simply "orion" for shared stuff across SoCs including Kirkwood.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:05:00 -04:00
Thomas Reitmayr 054bd3f053 [ARM] Kirkwood: Add the watchdog timer as a platform device.
The Kirkwood architecture uses the same watchdog device as the Orion
architecture. This patch adds orion5x_wdt as a platform device for
Kirkwood.

Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:59 -04:00
Rabeeh Khoury e8b2b7ba12 [ARM] Kirkwood: clock gating for unused peripherals
To save power:

1. Enabling clock gating of unused peripherals

2. PLL and PHY of the units are also disabled (when possible.

Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:58 -04:00
Nicolas Pitre fb7b2d3f0d [ARM] Kirkwood: rationalize NAND setup a bit
Common resource and platform device structures are moved to common.c
and only the partition table and chip delay remains a per board
parameter.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:58 -04:00
Erik Benada a88656553d [ARM] orion: convert gpio to use gpiolib
Signed-off-by: Erik Benada <erikbenada@yahoo.ca>

[ nico: fix locking, additional cleanups ]

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:57 -04:00
Nicolas Pitre f14081e109 [ARM] Kirkwood: comment type fix
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:56 -04:00
Nicolas Pitre 797b2c80e8 [ARM] Kirkwood: only map peripheral register space once
Just like commit 1419468ab5, let's save some TLB entries by making
ioremap() return pointers into the boot-time Kirkwood peripheral
iotable mapping whenever someone tries to ioremap any part of the Kirkwood
peripheral register space.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:56 -04:00
Siddarth Gore 96e7d211b4 [ARM] Kirkwood: enable gpio leds/buttons for the mv88f6281gtw_ge board
Signed-off-by: Siddarth Gore <gores@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2009-06-08 13:04:55 -04:00
Lennert Buytenhek 91af7bb2f4 [ARM] Kirkwood: add Marvell 88F6281 GTW GE board support
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2009-06-08 13:04:55 -04:00
Rabeeh Khoury e50b6befae [ARM] Kirkwood: CPU idle driver
The patch adds support for Kirkwood cpu idle.
Two idle states are defined:
1. Wait-for-interrupt (replacing default kirkwood wfi)
2. Wait-for-interrupt and DDR self refresh

Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:41 -04:00
Nicolas Pitre a49a018a6e [ARM] add coherent DMA mask for mv643xx_eth
Since commit eb0519b5a1, mv643xx_eth is non functional on ARM because
the platform device declaration does not include any coherent DMA mask
and coherent memory allocations fail.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-22 17:05:53 -04:00
Martin Michlmayr 85bc26211c [ARM] Orion: Remove explicit name for platform device resources
Remove explicit names from platform device resources since they will
automatically be named after the platform device they're associated
with.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-21 16:45:20 -04:00
Thomas Reitmayr 385aa9e701 [ARM] Kirkwood: Correct MPP for SATA activity/presence LEDs of QNAP TS-119/TS-219.
For the QNAP TS-119 and TS-219 the wrong MPPs were used for the SATA
activity/presence LEDs. The new settings make these LEDs work as
expected.

Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-20 22:17:32 -04:00
Nicolas Pitre fdd8b079e3 [ARM] 5460/1: Orion: reduce namespace pollution
Symbols like SOFT_RESET are way too generic to be exported at large.
To avoid this, let's move the mbus bridge register defines into a
separate file and include it where needed.  This affects mach-kirkwood,
mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all
share code in plat-orion which relies on those defines.

Some other defines have been moved to narrower scopes, or simply deleted
when they had no user.

This fixes compilation problem with mpt2sas on the above listed
platforms.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 23:25:41 +01:00
Yang Hongyang 284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Yang Hongyang 6a35528a83 dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Russell King ed40d0c472 Merge branch 'origin' into devel
Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c
2009-03-28 20:29:51 +00:00
Russell King cf281a99b6 Merge git://git.marvell.com/orion into devel 2009-03-25 10:00:08 +00:00
Martin Michlmayr 586dcf279b [ARM] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NAS
Add support for the QNAP TS-119 and TS-219 Turbo NAS devices.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23 16:12:38 -04:00
Martin Michlmayr a441891f9d [ARM] Kirkwood: More consistency regarding MPP naming
With the exception of UART0, all MPP names are uppercase.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23 14:45:24 -04:00
Martin Michlmayr 6574e001b4 [ARM] Kirkwood: Hook up I2C
Hook up I2C on Marvell Kirkwood.  Tested on a QNAP TS-219 which has
RTC connected through I2C.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23 14:42:00 -04:00
Lennert Buytenhek e84665c9cb dsa: add switch chip cascading support
The initial version of the DSA driver only supported a single switch
chip per network interface, while DSA-capable switch chips can be
interconnected to form a tree of switch chips.  This patch adds support
for multiple switch chips on a network interface.

An example topology for a 16-port device with an embedded CPU is as
follows:

	+-----+          +--------+       +--------+
	|     |eth0    10| switch |9    10| switch |
	| CPU +----------+        +-------+        |
	|     |          | chip 0 |       | chip 1 |
	+-----+          +---++---+       +---++---+
	                     ||               ||
	                     ||               ||
	                     ||1000baseT      ||1000baseT
	                     ||ports 1-8      ||ports 9-16

This requires a couple of interdependent changes in the DSA layer:

- The dsa platform driver data needs to be extended: there is still
  only one netdevice per DSA driver instance (eth0 in the example
  above), but each of the switch chips in the tree needs its own
  mii_bus device pointer, MII management bus address, and port name
  array. (include/net/dsa.h)  The existing in-tree dsa users need
  some small changes to deal with this. (arch/arm)

- The DSA and Ethertype DSA tagging modules need to be extended to
  use the DSA device ID field on receive and demultiplex the packet
  accordingly, and fill in the DSA device ID field on transmit
  according to which switch chip the packet is heading to.
  (net/dsa/tag_{dsa,edsa}.c)

- The concept of "CPU port", which is the switch chip port that the
  CPU is connected to (port 10 on switch chip 0 in the example), needs
  to be extended with the concept of "upstream port", which is the
  port on the switch chip that will bring us one hop closer to the CPU
  (port 10 for both switch chips in the example above).

- The dsa platform data needs to specify which ports on which switch
  chips are links to other switch chips, so that we can enable DSA
  tagging mode on them.  (For inter-switch links, we always use
  non-EtherType DSA tagging, since it has lower overhead.  The CPU
  link uses dsa or edsa tagging depending on what the 'root' switch
  chip supports.)  This is done by specifying "dsa" for the given
  port in the port array.

- The dsa platform data needs to be extended with information on via
  which port to reach any given switch chip from any given switch chip.
  This info is specified via the per-switch chip data struct ->rtable[]
  array, which gives the nexthop ports for each of the other switches
  in the tree.

For the example topology above, the dsa platform data would look
something like this:

	static struct dsa_chip_data sw[2] = {
		{
			.mii_bus	= &foo,
			.sw_addr	= 1,
			.port_names[0]	= "p1",
			.port_names[1]	= "p2",
			.port_names[2]	= "p3",
			.port_names[3]	= "p4",
			.port_names[4]	= "p5",
			.port_names[5]	= "p6",
			.port_names[6]	= "p7",
			.port_names[7]	= "p8",
			.port_names[9]	= "dsa",
			.port_names[10]	= "cpu",
			.rtable		= (s8 []){ -1, 9, },
		}, {
			.mii_bus	= &foo,
			.sw_addr	= 2,
			.port_names[0]	= "p9",
			.port_names[1]	= "p10",
			.port_names[2]	= "p11",
			.port_names[3]	= "p12",
			.port_names[4]	= "p13",
			.port_names[5]	= "p14",
			.port_names[6]	= "p15",
			.port_names[7]	= "p16",
			.port_names[10]	= "dsa",
			.rtable		= (s8 []){ 10, -1, },
		},
	},

	static struct dsa_platform_data pd = {
		.netdev		= &foo,
		.nr_switches	= 2,
		.sw		= sw,
	};

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:54 -07:00