Recognize BTRFS_BALANCE_RESUME flag passed from userspace. We use the
same heuristics used when recovering balance after a crash to try to
start where we left off last time.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Implement an ioctl for canceling restriper. Currently we wait until
relocation of the current block group is finished, in future this can be
done by triggering a commit. Balance item is deleted and no memory
about the interrupted balance is kept.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Implement an ioctl for pausing restriper. This pauses the relocation,
but balance is still considered to be "in progress": balance item is
not deleted, other volume operations cannot be started, etc. If paused
in the middle of profile changing operation we will continue making
allocations with the target profile.
Add a hook to close_ctree() to pause restriper and free its data
structures on unmount. (It's safe to unmount when restriper is in
"paused" state, we will resume with the same parameters on the next
mount)
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since restriper kthread starts involuntarily on mount and can suck cpu
and memory bandwidth add a mount option to forcefully skip it. The
restriper in that case hangs around in paused state and can be resumed
from userspace when it's convenient.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
On mount, if balance item is found, resume balance in a separate
kernel thread.
Try to be smart to continue roughly where previous balance (or convert)
was interrupted. For chunk types that were being converted to some
profile we turn on soft convert, in case of a simple balance we turn on
usage filter and relocate only less-than-90%-full chunks of that type.
These are just heuristics but they help quite a bit, and can be improved
in future.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Introduce a new btree objectid for storing balance item. The reason is
to be able to resume restriper after a crash with the same parameters.
Balance item has a very high objectid and goes into tree of tree roots.
The key for the new item is as follows:
[ BTRFS_BALANCE_OBJECTID ; BTRFS_BALANCE_ITEM_KEY ; 0 ]
Older kernels simply ignore it so it's safe to mount with an older
kernel and then go back to the newer one.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When doing convert from one profile to another if soft mode is on
restriper won't touch chunks that already have the profile we are
converting to. This is useful if e.g. half of the FS was converted
earlier.
The soft mode switch is (like every other filter) per-type. This means
that we can convert for example meta chunks the "hard" way while
converting data chunks selectively with soft switch.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Profile changing is done by launching a balance with
BTRFS_BALANCE_CONVERT bits set and target fields of respective
btrfs_balance_args structs initialized. Profile reducing code in this
case will pick restriper's target profile if it's available instead of
doing a blind reduce. If target profile is not yet available it goes
back to a plain reduce.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Every caller of do_chunk_alloc() feeds it the reduced allocation
profile, so stop trying to reduce it one more time. Instead check the
validity of the passed profile.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Select chunks which have at least one byte located inside a given
[vstart, vend) virtual address space range.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Select chunks which have at least one byte of at least one stripe
located on a device with devid X in a given [pstart,pend) physical
address range.
This filter only works when devid filter is turned on.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This allows to have a separate set of filters for each chunk type
(data,meta,sys). The code however is generic and switch on chunk type
is only done once.
This commit also adds a type filter: it allows to balance for example
meta and system chunks w/o touching data ones.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add basic restriper infrastructure: extended balancing ioctl and all
related ioctl data structures, add data structure for tracking
restriper's state to fs_info, etc. The semantics of the old balancing
ioctl are fully preserved.
Explicitly disallow any volume operations when balance is in progress.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently when new chunks are created respective avail_alloc_bits field
is updated to reflect profiles of all chunks present in the system.
However when chunks are removed profile bits are never cleared.
This patch clears profile bit of respective avail_alloc_bits field when
the last chunk with that profile is removed. Restriper needs this to
properly operate when "downgrading".
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Right now on-disk BTRFS_BLOCK_GROUP_* profile bits are used for
avail_{data,metadata,system}_alloc_bits fields, which gather info about
available allocation profiles in the FS. When chunk is created or read
from disk, its profile is OR'ed with the corresponding avail_alloc_bits
field. Since SINGLE is denoted by 0 in the on-disk format, currently
there is no way to tell when such chunks become avaialble. Restriper
needs that information, so add a separate bit for SINGLE profile.
This bit is going to be in-memory only, it should never be written out
to disk, so it's not a disk format change. However to avoid remappings
in future, reserve corresponding on-disk bit.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Chunk's type and profile are encoded in u64 flags field. Introduce
masks to easily access them. Also fix the type of BTRFS_BLOCK_GROUP_*
constants, it should be ULL.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The correct lock order is uuid_mutex -> volume_mutex -> chunk_mutex,
but when we mount a filesystem which has backing seed devices, we have
this lock chain:
open_ctree()
lock(chunk_mutex);
read_chunk_tree();
read_one_dev();
open_seed_devices();
lock(uuid_mutex);
and then we hit a lockdep splat.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
A bug was triggered while using seed device:
# mkfs.btrfs /dev/loop1
# btrfstune -S 1 /dev/loop1
# mount -o /dev/loop1 /mnt
# btrfs dev add /dev/loop2 /mnt
btrfs: block rsv returned -28
------------[ cut here ]------------
WARNING: at fs/btrfs/extent-tree.c:5969 btrfs_alloc_free_block+0x166/0x396 [btrfs]()
...
Call Trace:
...
[<f7b7c31c>] btrfs_cow_block+0x101/0x147 [btrfs]
[<f7b7eaa6>] btrfs_search_slot+0x1b8/0x55f [btrfs]
[<f7b7f844>] btrfs_insert_empty_items+0x42/0x7f [btrfs]
[<f7b7f8c1>] btrfs_insert_item+0x40/0x7e [btrfs]
[<f7b8ac02>] btrfs_make_block_group+0x243/0x2aa [btrfs]
[<f7bb3f53>] __btrfs_alloc_chunk+0x672/0x70e [btrfs]
[<f7bb41ff>] init_first_rw_device+0x77/0x13c [btrfs]
[<f7bb5a62>] btrfs_init_new_device+0x664/0x9fd [btrfs]
[<f7bbb65a>] btrfs_ioctl+0x694/0xdbe [btrfs]
[<c04f55f7>] do_vfs_ioctl+0x496/0x4cc
[<c04f5660>] sys_ioctl+0x33/0x4f
[<c07b9edf>] sysenter_do_call+0x12/0x38
---[ end trace 906adac595facc7d ]---
Since seed device is readonly, there's no usable space in the filesystem.
Afterwards we add a sprout device to it, and the kernel creates a METADATA
block group and a SYSTEM block group where comes free space we can reserve,
but we still get revervation failure because the global block_rsv hasn't
been updated accordingly.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
There are various bugs in block group trimming:
- It may trim from offset smaller than user-specified offset.
- It may trim beyond user-specified range.
- It may leak free space for extents smaller than specified minlen.
- It may truncate the last trimmed extent thus leak free space.
- With mixed extents+bitmaps, some extents may not be trimmed.
- With mixed extents+bitmaps, some bitmaps may not be trimmed (even
none will be trimmed). Even for those trimmed, not all the free space
in the bitmaps will be trimmed.
I rewrite btrfs_trim_block_group() and break it into two functions.
One is to trim extents only, and the other is to trim bitmaps only.
Before patching:
# fstrim -v /mnt/
/mnt/: 1496465408 bytes were trimmed
After patching:
# fstrim -v /mnt/
/mnt/: 2193768448 bytes were trimmed
And this matches the total free space:
# btrfs fi df /mnt
Data: total=3.58GB, used=1.79GB
System, DUP: total=8.00MB, used=4.00KB
System: total=4.00MB, used=0.00
Metadata, DUP: total=205.12MB, used=97.14MB
Metadata: total=8.00MB, used=0.00
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
For btrfs raid, while discarding a range of space, we'll need to know
the start offset and length to discard for each device, and it's done
in btrfs_map_block().
However the calculation is a bit complex for raid0 and raid10, so I
reimplement it based on a fact that:
dev1 dev2 dev3 (raid0)
-----------------------------------
s0 s3 s6 s1 s4 s7 s2 s5
Each device has (total_stripes / nr_dev) stripes, or plus one.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
We pre-allocate a btrfs bio with fixed size, and then may re-allocate
memory if we find stripes are bigger than the fixed size. But this
pre-allocation is not necessary.
Also we don't have to calcuate the stripe number twice.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
If we run into some failure path in io_ctl_prepare_pages(),
io_ctl->pages[] array may have some NULL pointers.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
I got this while running xfstests:
[24256.836098] block group 317849600 has an wrong amount of free space
[24256.836100] btrfs: failed to load free space cache for block group 317849600
We should clamp the extent returned by find_first_extent_bit(),
so the start of the extent won't smaller than the start of the
block group.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Parameterize clusters on minimum total size, minimum chunk size and
minimum contiguous size for at least one chunk, without limits on
cluster, window or gap sizes. Don't tolerate any fragmentation for
SSD_SPREAD; accept it for metadata, but try to keep data dense.
Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We store the allocation start and length twice in ins, once right
after the other, but with intervening calls that may prevent the
duplicate from being optimized out by the compiler. Remove one of the
assignments.
Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Since the clustered allocation may be taking extents from a different
block group, there's no point in spin-locking and testing the current
block group free space before attempting to allocate space from a
cluster, even more so when we might refrain from even trying the
cluster in the current block group because, after the cluster was set
up, not enough free space remained. Furthermore, cluster creation
attempts fail fast when the block group doesn't have enough free
space, so the test was completely superfluous.
I've move the free space test past the cluster allocation attempt,
where it is more useful, and arranged for a cluster in the current
block group to be released before trying an unclustered allocation,
when we reach the LOOP_NO_EMPTY_SIZE stage, so that the free space in
the cluster stands a chance of being combined with additional free
space in the block group so as to succeed in the allocation attempt.
Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The chunk allocation code has tried to keep a pretty tight lid on creating new
metadata chunks. This is partially because in the past the reservation
code didn't give us an accurate idea of how much space was being used.
The new code is much more accurate, so we're able to get rid of some of these
checks.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs tries to batch extent allocation tree changes to improve performance
and reduce metadata trashing. But it doesn't allocate new metadata chunks
while it is doing allocations for the extent allocation tree.
This commit changes the delayed refence code to do chunk allocations if we're
getting low on room. It prevents crashes and improves performance.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There's code in btrfs_get_extent that should never be used. This patch turns
a WARN_ON(1) into a BUG(), hoping we can remove the transaction code from
btrfs_get_extent soon.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
The old backref iteration code could only safely be used on commit roots.
Besides this limitation, it had bugs in finding the roots for these
references. This commit replaces large parts of it by btrfs_find_all_roots()
which a) really finds all roots and the correct roots, b) works correctly
under heavy file system load, c) considers delayed refs.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
fix CAN MAINTAINERS SCM tree type
mwifiex: fix crash during simultaneous scan and connect
b43: fix regression in PIO case
ath9k: Fix kernel panic in AR2427 in AP mode
CAN MAINTAINERS update
net: fsl: fec: fix build for mx23-only kernel
sch_qfq: fix overflow in qfq_update_start()
Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"
bitmap size sanity checks should be done *before* allocating ->s_root;
there their cleanup on failure would be correct. As it is, we do iput()
on root inode, but leak the root dentry...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the temporary simple fix for 3.2, we need more changes in this
area.
1. do_signal_stop() assumes that the running untraced thread in the
stopped thread group is not possible. This was our goal but it is
not yet achieved: a stopped-but-resumed tracee can clone the running
thread which can initiate another group-stop.
Remove WARN_ON_ONCE(!current->ptrace).
2. A new thread always starts with ->jobctl = 0. If it is auto-attached
and this group is stopped, __ptrace_unlink() sets JOBCTL_STOP_PENDING
but JOBCTL_STOP_SIGMASK part is zero, this triggers WANR_ON(!signr)
in do_jobctl_trap() if another debugger attaches.
Change __ptrace_unlink() to set the artificial SIGSTOP for report.
Alternatively we could change ptrace_init_task() to copy signr from
current, but this means we can copy it for no reason and hide the
possible similar problems.
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org> [3.1]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Test-case:
int main(void)
{
int pid, status;
pid = fork();
if (!pid) {
for (;;) {
if (!fork())
return 0;
if (waitpid(-1, &status, 0) < 0) {
printf("ERR!! wait: %m\n");
return 0;
}
}
}
assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0);
assert(waitpid(-1, NULL, 0) == pid);
assert(ptrace(PTRACE_SETOPTIONS, pid, 0,
PTRACE_O_TRACEFORK) == 0);
do {
ptrace(PTRACE_CONT, pid, 0, 0);
pid = waitpid(-1, NULL, 0);
} while (pid > 0);
return 1;
}
It fails because ->real_parent sees its child in EXIT_DEAD state
while the tracer is going to change the state back to EXIT_ZOMBIE
in wait_task_zombie().
The offending commit is 823b018e which moved the EXIT_DEAD check,
but in fact we should not blame it. The original code was not
correct as well because it didn't take ptrace_reparented() into
account and because we can't really trust ->ptrace.
This patch adds the additional check to close this particular
race but it doesn't solve the whole problem. We simply can't
rely on ->ptrace in this case, it can be cleared if the tracer
is multithreaded by the exiting ->parent.
I think we should kill EXIT_DEAD altogether, we should always
remove the soon-to-be-reaped child from ->children or at least
we should never do the DEAD->ZOMBIE transition. But this is too
complex for 3.2.
Reported-and-tested-by: Denys Vlasenko <vda.linux@googlemail.com>
Tested-by: Lukasz Michalik <lmi@ift.uni.wroc.pl>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org> [3.0+]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Mason