Commit Graph

695 Commits

Author SHA1 Message Date
Nishanth Aravamudan 6c3bbdd660 microblaze: pci-common cleanup
Use set_dma_ops and remove now used-once oddly named temp pointer sd.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:54 +10:00
Michal Simek 67f4aaa21c microblaze: Support early console on uart16550
Early console support reuse setting from U-BOOT that's why
it is not necessary to setup baudrates, etc.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:53 +10:00
Michal Simek 51f5fa5094 microblaze: Do not compile early console support for uartlite if is disabled
Kconfig blocks to select any other early console support that's why
this patch has no real impact on current kernel version. But it is done
because of uart16550.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:52 +10:00
Michal Simek 9a7e8d805e microblaze: Setup early console dynamically
Just setup pointer early console in run time.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:51 +10:00
Michal Simek 2af9ebe951 microblaze: Rename all uartlite early printk functions
This is done because of uart16550 early printk support

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:49 +10:00
Michal Simek 96a5ff4229 microblaze: remove early printk uarlite console dependency from header
This dependency is resolved in menuconfig.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:48 +10:00
Michal Simek e65f1e2843 microblaze: Remove additional compatible properties
Device-tree BSP generates longer compatible properties
that's why we can remove extra/old one.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:47 +10:00
Michal Simek a7d8355008 microblaze: Remove hardcoded asm instraction for PVR loading
It comes from past where pvr wasn't supported in msr instruction.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:46 +10:00
Joe Perches 92ee8bd468 microblaze: Use static const char * const where possible
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:45 +10:00
Michal Simek 099a2f4284 microblaze: Define VMALLOC_START/END
per cpu changes requires VMALLOC_START/END to be
define even for noMMU systems.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:44 +10:00
Michal Simek bd3b492a29 microblaze: Export missing symbols for modules
Several kernel modules requires empty_zero_page and mbc
to be exported.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:43 +10:00
Michal Simek 4e07dba7cb microblaze: Add libgcc function directly to kernel
Replaced libgcc functions with asm optimized implementation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:42 +10:00
Michal Simek cec051671d microblaze: support gpio_to_irq()
gpiolib returns -ENXIO if struct gpio_chip::to_irq isn't set, so it's
safe to always call.

Based on PPC patch
"powerpc/gpio: support gpio_to_irq()"
78331aded9

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:41 +10:00
Michal Simek ac2e7c92ee microblaze: Define empty mmiowb
mmiowb is required by any driver.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:39 +10:00
Michal Simek 4d24d7f7ae microblaze: wire up prlimit64 and fanotify* syscalls
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:38 +10:00
FUJITA Tomonori b9b12fd147 microblaze: use asm-generic/pci-dma-compat.h
Use asm-generic/pci-dma-compat.h instead of the homegrown
pci_set_dma_mask and pci_set_consistent_dma_mask.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2010-10-21 15:51:37 +10:00
Michal Simek 6d5f2f6d41 microblaze: Add PVR for BTC
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:36 +10:00
Michal Simek f66efecad0 microblaze: Add new microblaze versions
PVR for 7.30.b, 8.00.a versions.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:35 +10:00
Michal Simek b3ea838093 microblaze: remove OUTPUT_FORMAT from linker script
OUTPUT_FORMAT setup bigendian platform. Microblaze Linux port
is becoming bi endian that's why it is removed.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:34 +10:00
Michal Simek 600eb6110a microblaze: Fix r16 and r17 reg saving
r16 and r17 should be saved across interrupt and exception handling.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:33 +10:00
Christian Dietrich 36cf089dc6 microblaze: Removing dead CONTIGUOUS_PAGE_ALLOC config option
CONFIG_CONTIGUOUS_PAGE_ALLOC doesn't exist in Kconfig, therefore removing
all references to it from the source.

Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:31 +10:00
Michal Simek 69717607f0 microblaze: Report if only one timer is used
Kernel needs two timers because of clocksource and clockevent.
It is better to show warning message directly on early
console if available. If it isn't available kernel log buffer
contains it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:30 +10:00
Michal Simek 7d4320956f microblaze: Clear return value in pt_regs
Signal code uses r3 value which saved in restore_sigcontext to
rt_sigframe but it require to be zeroed. If is not zero rt_sigframe
contains wrong values.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:29 +10:00
Michal Simek 791d0a169b microblaze: Fix sys_rt_sigreturn_wrapper
Do not save return registers before rt_sigreturn is called.
_user_exception(syscall handler) already setup return address
that's why it is removed from rt_sigreturn_wrapper.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:27 +10:00
Michal Simek 06d1973490 microblaze: remove unused TIF_KERNEL_TRACE
TIF_KERNEL_TRACE is not used anywhere.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:26 +10:00
Michal Simek 68c6ac3366 microblaze: Add seccomp support
Add seccomp support.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:25 +10:00
Michal Simek 0425609680 microblaze: Remove old user debugging gdb stub
Old gdb uses priviledged exception handler to handle
gdb exception. New gdb uses brki r16, 0x18 that's why
we can remove old gdb support.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:23 +10:00
Michal Simek 95d3a8cd15 microblaze: trivial: thread_info cleanup
Coding style cleanup.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:21 +10:00
Michal Simek 5f0cb3e01e microblaze: Fix pmd_populate macro
Compilation warning:
mm/memory.c: In function '__pte_alloc':
mm/memory.c:421: warning: assignment makes integer from pointer without a cast

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:20 +10:00
Michal Simek f859f0a235 microblaze: kgdb: Remove unused variable and fix return value
I forget to remove unused variable from kgdb_arch_handle_exception.
Fix return value in microblaze_kgdb_break function.

Error log:
arch/microblaze/kernel/kgdb.c: In function 'microblaze_kgdb_break':
arch/microblaze/kernel/kgdb.c:83: warning: 'return' with a value, in function returning void
arch/microblaze/kernel/kgdb.c: In function 'kgdb_arch_handle_exception':
arch/microblaze/kernel/kgdb.c:119: warning: unused variable 'cpu'

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:19 +10:00
Michal Simek 4bdfd9ebc3 microblaze: Fix generic DTS to ensure OF requirements
LL Temac dts nodes should contain ranges property.
It is sufficient to use empty ranges property.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:18 +10:00
Joe Perches c4554c32a7 microblaze: Remove pr_<level> uses of KERN_<level>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:37:28 +10:00
Michal Marek 239060b93b Merge branch 'kbuild/rc-fixes' into kbuild/kconfig
We need to revert the temporary hack in 71ebc01, hence the merge.
2010-10-12 15:09:06 +02:00
David Howells df9ee29270 Fix IRQ flag handling naming
Fix the IRQ flag handling naming.  In linux/irqflags.h under one configuration,
it maps:

	local_irq_enable() -> raw_local_irq_enable()
	local_irq_disable() -> raw_local_irq_disable()
	local_irq_save() -> raw_local_irq_save()
	...

and under the other configuration, it maps:

	raw_local_irq_enable() -> local_irq_enable()
	raw_local_irq_disable() -> local_irq_disable()
	raw_local_irq_save() -> local_irq_save()
	...

This is quite confusing.  There should be one set of names expected of the
arch, and this should be wrapped to give another set of names that are expected
by users of this facility.

Change this to have the arch provide:

	flags = arch_local_save_flags()
	flags = arch_local_irq_save()
	arch_local_irq_restore(flags)
	arch_local_irq_disable()
	arch_local_irq_enable()
	arch_irqs_disabled_flags(flags)
	arch_irqs_disabled()
	arch_safe_halt()

Then linux/irqflags.h wraps these to provide:

	raw_local_save_flags(flags)
	raw_local_irq_save(flags)
	raw_local_irq_restore(flags)
	raw_local_irq_disable()
	raw_local_irq_enable()
	raw_irqs_disabled_flags(flags)
	raw_irqs_disabled()
	raw_safe_halt()

with type checking on the flags 'arguments', and then wraps those to provide:

	local_save_flags(flags)
	local_irq_save(flags)
	local_irq_restore(flags)
	local_irq_disable()
	local_irq_enable()
	irqs_disabled_flags(flags)
	irqs_disabled()
	safe_halt()

with tracing included if enabled.

The arch functions can now all be inline functions rather than some of them
having to be macros.

Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300]
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile]
Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze]
Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM]
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR]
Acked-by: Tony Luck <tony.luck@intel.com> [IA-64]
Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R]
Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC]
Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390]
Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score]
Acked-by: Matt Fleming <matt@console-pimps.org> [SH]
Acked-by: David S. Miller <davem@davemloft.net> [Sparc]
Acked-by: Chris Zankel <chris@zankel.net> [Xtensa]
Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha]
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300]
Cc: starvik@axis.com [CRIS]
Cc: jesper.nilsson@axis.com [CRIS]
Cc: linux-cris-kernel@axis.com
2010-10-07 14:08:55 +01:00
Arnaud Lacombe 838a2e55e6 kbuild: migrate all arch to the kconfig mainmenu upgrade
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-09-19 22:54:11 -04:00
Michal Simek da5ab11cdf memblock, microblaze: Fix memblock API change fallout
Adopt Microblaze to the memblock API changes, to fix this
build failure:

  CC      arch/microblaze/mm/init.o
 arch/microblaze/mm/init.c: In function 'mm_cmdline_setup':
 arch/microblaze/mm/init.c:236: error: 'struct memblock_type' has no member named 'region'
 ...

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: linux-mm@kvack.org
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <4C8B2A9A.1040303@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-11 10:30:28 +02:00
Ingo Molnar daab7fc734 Merge commit 'v2.6.36-rc3' into x86/memblock
Conflicts:
	arch/x86/kernel/trampoline.c
	mm/memblock.c

Merge reason: Resolve the conflicts, update to latest upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-31 09:45:46 +02:00
Linus Torvalds 86ea51d4a2 Merge branch 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  spi.h: missing kernel-doc notation, please fix
  of: fix missing headers for of_address_to_resource() in MTD and SysACE drivers
  of: Fix missing includes
  ata: update for of_device to platform_device replacement
  microblaze: Fix of: eliminate of_device->node and dev_archdata->{of,prom}_node
  microblaze: Fix of/address: Merge all of the bus translation code
  booting-without-of: Remove nonexistent chapters from TOC, fix numbering
2010-08-18 09:26:17 -07:00
David Howells d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
Grant Likely f1ca09b2b5 of: Fix missing includes
This patch fixes missing includes from a number of .c files because
the code (wrongfully) depended on prom.h including them.  The include
of linux/of_address.h was removed in microblaze prom.h in commit
"of/address: Clean up function declarations" (sha1 id 22ae782f8), but
not fixed in some callers.  This patch fixes them up.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Michal Simek <monstr@monstr.eu>
2010-08-16 23:44:49 -06:00
Michal Simek 088ab302f2 microblaze: Fix of: eliminate of_device->node and dev_archdata->{of,prom}_node
Commit 58f9b0b024 should
contain this fix too.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-16 14:55:48 -06:00
Michal Simek a8dcb878b6 microblaze: Fix of/address: Merge all of the bus translation code
Commit dbbdee9473 removed
of_irq_pci_swizzle but didn't use pci_swizzle_interrupt_pin
instead.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-16 14:55:46 -06:00
Sam Ravnborg 8b1bb90701 defconfig reduction
Use the defconfig files generated by "make savedefconfig" for
remaining defconfig files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14 22:26:53 +02:00
David Howells c788732523 Mark arguments to certain syscalls as being const
Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13 16:53:13 -07:00
FUJITA Tomonori 3b9c6c11f5 dma-mapping: remove dma_is_consistent API
Architectures implement dma_is_consistent() in different ways (some
misinterpret the definition of API in DMA-API.txt).  So it hasn't been so
useful for drivers.  We have only one user of the API in tree.  Unlikely
out-of-tree drivers use the API.

Even if we fix dma_is_consistent() in some architectures, it doesn't look
useful at all.  It was invented long ago for some old systems that can't
allocate coherent memory at all.  It's better to export only APIs that are
definitely necessary for drivers.

Let's remove this API.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
FUJITA Tomonori 4565f0170d dma-mapping: unify dma_get_cache_alignment implementations
dma_get_cache_alignment returns the minimum DMA alignment.  Architectures
defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN).  So we
can unify dma_get_cache_alignment implementations.

Note that some architectures implement dma_get_cache_alignment wrongly.
dma_get_cache_alignment() should return the minimum DMA alignment.  So
fully-coherent architectures should return 1.  This patch also fixes this
issue.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
FUJITA Tomonori a6eb9fe105 dma-mapping: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
Now each architecture has the own dma_get_cache_alignment implementation.

dma_get_cache_alignment returns the minimum DMA alignment.  Architectures
define it as ARCH_KMALLOC_MINALIGN (it's used to make sure that malloc'ed
buffer is DMA-safe; the buffer doesn't share a cache with the others).  So
we can unify dma_get_cache_alignment implementations.

This patch:

dma_get_cache_alignment() needs to know if an architecture defines
ARCH_KMALLOC_MINALIGN or not (needs to know if architecture has DMA
alignment restriction).  However, slab.h define ARCH_KMALLOC_MINALIGN if
architectures doesn't define it.

Let's rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN.
ARCH_KMALLOC_MINALIGN is used only in the internals of slab/slob/slub
(except for crypto).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
Linus Torvalds 2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
FUJITA Tomonori 7e005f7979 remove needless ISA_DMA_THRESHOLD
Architectures don't need to define ISA_DMA_THRESHOLD anymore.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:15:50 +02:00
Linus Torvalds b62ad9ab18 Merge branch 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um: Fix read_persistent_clock fallout
  kgdb: Do not access xtime directly
  powerpc: Clean up obsolete code relating to decrementer and timebase
  powerpc: Rework VDSO gettimeofday to prevent time going backwards
  clocksource: Add __clocksource_updatefreq_hz/khz methods
  x86: Convert common clocksources to use clocksource_register_hz/khz
  timekeeping: Make xtime and wall_to_monotonic static
  hrtimer: Cleanup direct access to wall_to_monotonic
  um: Convert to use read_persistent_clock
  timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset
  powerpc: Cleanup xtime usage
  powerpc: Simplify update_vsyscall
  time: Kill off CONFIG_GENERIC_TIME
  time: Implement timespec_add
  x86: Fix vtime/file timestamp inconsistencies

Trivial conflicts in Documentation/feature-removal-schedule.txt

Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as
per Thomas' earlier merge commit 47916be4e2 ("Merge branch
'powerpc.cherry-picks' into timers/clocksource")
2010-08-06 13:18:29 -07:00
Linus Torvalds 4aed2fd8e3 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
  tracing/kprobes: unregister_trace_probe needs to be called under mutex
  perf: expose event__process function
  perf events: Fix mmap offset determination
  perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
  perf, powerpc: Convert the FSL driver to use local64_t
  perf tools: Don't keep unreferenced maps when unmaps are detected
  perf session: Invalidate last_match when removing threads from rb_tree
  perf session: Free the ref_reloc_sym memory at the right place
  x86,mmiotrace: Add support for tracing STOS instruction
  perf, sched migration: Librarize task states and event headers helpers
  perf, sched migration: Librarize the GUI class
  perf, sched migration: Make the GUI class client agnostic
  perf, sched migration: Make it vertically scrollable
  perf, sched migration: Parameterize cpu height and spacing
  perf, sched migration: Fix key bindings
  perf, sched migration: Ignore unhandled task states
  perf, sched migration: Handle ignored migrate out events
  perf: New migration tool overview
  tracing: Drop cpparg() macro
  perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
  ...

Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
2010-08-06 09:30:52 -07:00
Linus Torvalds 03c0c29aff Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits)
  of/platform: Register of_platform_drivers with an "of:" prefix
  of/address: Clean up function declarations
  of/spi: call of_register_spi_devices() from spi core code
  of: Provide default of_node_to_nid() implementation.
  of/device: Make of_device_make_bus_id() usable by other code.
  of/irq: Fix endian issues in parsing interrupt specifiers
  of: Fix phandle endian issues
  of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string
  of: remove of_default_bus_ids
  of: make of_find_device_by_node generic
  microblaze: remove references to of_device and to_of_device
  sparc: remove references to of_device and to_of_device
  powerpc: remove references to of_device and to_of_device
  of/device: Replace of_device with platform_device in includes and core code
  of/device: Protect against binding of_platform_drivers to non-OF devices
  of: remove asm/of_device.h
  of: remove asm/of_platform.h
  of/platform: remove all of_bus_type and of_platform_bus_type references
  of: Merge of_platform_bus_type with platform_bus_type
  drivercore/of: Add OF style matching to platform bus
  ...

Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just
some obj-y removals by the devicetree branch, while the microblaze
updates added a new file.
2010-08-05 15:57:35 -07:00
Linus Torvalds bbc4fd12a6 Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (49 commits)
  microblaze: Add KGDB support
  microblaze: Support brki rX, 0x18 for user application debugging
  microblaze: Remove nop after MSRCLR/SET, MTS, MFS instructions
  microblaze: Simplify syscall rutine
  microblaze: Move PT_MODE saving to delay slot
  microblaze: Fix _interrupt function
  microblaze: Fix _user_exception function
  microblaze: Put together addik instructions
  microblaze: Use delay slot in syscall macros
  microblaze: Save kernel mode in delay slot
  microblaze: Do not mix register saving and mode setting
  microblaze: Move SAVE_STATE upward
  microblaze: entry.S: Macro optimization
  microblaze: Optimize hw exception rutine
  microblaze: Implement clear_ums macro and fix SAVE_STATE macro
  microblaze: Remove additional setup for kernel_mode
  microblaze: Optimize SAVE_STATE macro
  microblaze: Remove additional loading
  microblaze: Completely remove working with R11 register
  microblaze: Do not setup BIP in _debug_exception
  ...
2010-08-05 08:59:22 -07:00
Benjamin Herrenschmidt e63075a3c9 memblock: Introduce default allocation limit and use it to replace explicit ones
This introduce memblock.current_limit which is used to limit allocations
from memblock_alloc() or memblock_alloc_base(..., MEMBLOCK_ALLOC_ACCESSIBLE).

The old MEMBLOCK_ALLOC_ANYWHERE changes value from 0 to ~(u64)0 and can still
be used with memblock_alloc_base() to allocate really anywhere.

It is -no-longer- cropped to MEMBLOCK_REAL_LIMIT which disappears.

Note to archs: I'm leaving the default limit to MEMBLOCK_ALLOC_ANYWHERE. I
strongly recommend that you ensure that you set an appropriate limit
during boot in order to guarantee that an memblock_alloc() at any time
results in something that is accessible with a simple __va().

The reason is that a subsequent patch will introduce the ability for
the array to resize itself by reallocating itself. The MEMBLOCK core will
honor the current limit when performing those allocations.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-05 12:56:07 +10:00
Linus Torvalds 3cfc2c42c1 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
  Documentation: update broken web addresses.
  fix comment typo "choosed" -> "chosen"
  hostap:hostap_hw.c Fix typo in comment
  Fix spelling contorller -> controller in comments
  Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
  fs/Kconfig: Fix typo Userpace -> Userspace
  Removing dead MACH_U300_BS26
  drivers/infiniband: Remove unnecessary casts of private_data
  fs/ocfs2: Remove unnecessary casts of private_data
  libfc: use ARRAY_SIZE
  scsi: bfa: use ARRAY_SIZE
  drm: i915: use ARRAY_SIZE
  drm: drm_edid: use ARRAY_SIZE
  synclink: use ARRAY_SIZE
  block: cciss: use ARRAY_SIZE
  comment typo fixes: charater => character
  fix comment typos concerning "challenge"
  arm: plat-spear: fix typo in kerneldoc
  reiserfs: typo comment fix
  update email address
  ...
2010-08-04 15:31:02 -07:00
Linus Torvalds 6ba74014c1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
  phy/marvell: add 88ec048 support
  igb: Program MDICNFG register prior to PHY init
  e1000e: correct MAC-PHY interconnect register offset for 82579
  hso: Add new product ID
  can: Add driver for esd CAN-USB/2 device
  l2tp: fix export of header file for userspace
  can-raw: Fix skb_orphan_try handling
  Revert "net: remove zap_completion_queue"
  net: cleanup inclusion
  phy/marvell: add 88e1121 interface mode support
  u32: negative offset fix
  net: Fix a typo from "dev" to "ndev"
  igb: Use irq_synchronize per vector when using MSI-X
  ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
  e1000e: Fix irq_synchronize in MSI-X case
  e1000e: register pm_qos request on hardware activation
  ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
  net: Add getsockopt support for TCP thin-streams
  cxgb4: update driver version
  cxgb4: add new PCI IDs
  ...

Manually fix up conflicts in:
 - drivers/net/e1000e/netdev.c: due to pm_qos registration
   infrastructure changes
 - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
   and cleaning up the IDs
 - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
   conflict (registration change vs marking it static)
2010-08-04 11:47:58 -07:00
Jiri Kosina d790d4d583 Merge branch 'master' into for-next 2010-08-04 15:14:38 +02:00
Michal Simek 2d5973cb5a microblaze: Add KGDB support
Kgdb uses brki r16, 0x18 instruction to call
low level _debug_exception function which save
current state to pt_regs and call microblaze_kgdb_break
function. _debug_exception should be called only from
the kernel space. User space calling is not supported
because user application debugging uses different handling.

pt_regs_to_gdb_regs loads additional special registers
which can't be changed

 * Enable KGDB in Kconfig
 * Remove ancient not-tested KGDB support
 * Remove ancient _debug_exception code from entry.S

Only MMU KGDB support is supported.

Signed-off-by: Michal Simek <monstr@monstr.eu>
CC: Jason Wessel <jason.wessel@windriver.com>
CC: John Williams <john.williams@petalogix.com>
CC: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
CC: linux-kernel@vger.kernel.org
Acked-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-04 10:45:17 +02:00
Michal Simek 751f1605e0 microblaze: Support brki rX, 0x18 for user application debugging
This is the first patch which add support for
user application debugging through brki rX, 0x18 vector.

This patch has side effect which also remove security issue
to use brki rX, 0x18 to freeze kernel.

Support for old gdb support via priviledged exception
(brk r0, r0) is still there. It will be remove in future.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:16 +02:00
Michal Simek 958063e67b microblaze: Remove nop after MSRCLR/SET, MTS, MFS instructions
We need to save instruction and the latest Microblaze shouldn't
have any problem with it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:16 +02:00
Michal Simek 0e41c90908 microblaze: Simplify syscall rutine
Syscall can be called only from userspace that's why
we don't need to check which space kernel come from.

Kernel syscall calling is not check and shouldn't come
throught this part of code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:15 +02:00
Michal Simek 0a6b08fda6 microblaze: Move PT_MODE saving to delay slot
We can save one more instruction if PT_MODE is saved in delay slot

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:14 +02:00
Michal Simek 80c5ff6b9b microblaze: Fix _interrupt function
Save instructions by using delay slot and
clear UMS only if kernel comes from user space.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:13 +02:00
Michal Simek 25f6e59657 microblaze: Fix _user_exception function
Saving some instructions. Clear VMS bit if kernel comes
from kernel space.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:12 +02:00
Michal Simek 287503fabd microblaze: Put together addik instructions
Saving instructions by adding 2/3 addik instructions to one.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:44:56 +02:00
Michal Simek 9814cc11e5 microblaze: Use delay slot in syscall macros
Saving instruction with delay slot usage.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:32:22 +02:00
Michal Simek da23355280 microblaze: Save kernel mode in delay slot
This change save one instruction if kernel comes from kernel
space.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:32:21 +02:00
Michal Simek e7741075b3 microblaze: Do not mix register saving and mode setting
Separate reg saving and mode setting.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:32:20 +02:00
Michal Simek e5d2af2b96 microblaze: Move SAVE_STATE upward
SAVE_STATE macro could be used by other rutines too.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:31:09 +02:00
Michal Simek 66f7de8634 microblaze: entry.S: Macro optimization
We are not working with values from MSR that's why
we can discard it and use r11 for different purpose without
saving/restoring.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:30:07 +02:00
Michal Simek c318d483b3 microblaze: Optimize hw exception rutine
Remove set_vms because UMS is cleared and VMS is already setup.
Optimize function calling which save one additional instruction.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:30:06 +02:00
Michal Simek b318067e2c microblaze: Implement clear_ums macro and fix SAVE_STATE macro
VMS is always setup because VM mode was before
exception/syscall/interrupt. Kernel continues in kernel mode
that's why we have to clear UMS bit if kernel comes from
user space.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:29:44 +02:00
Michal Simek 77f6d22605 microblaze: Remove additional setup for kernel_mode
PT_MODE stores information if kernel comes from user
or kernel space. If come from user space, PT_MODE
contains 0. If come from kernel store, PT_MODE contains
non zero value. We don't need to save value 1. I am using
r1 register which contains non zero value.
This change save one additional instruction.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:53 +02:00
Michal Simek 06a54604a3 microblaze: Optimize SAVE_STATE macro
SAVE_STATE macro could be used for user_exception
or interrupt functions.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:52 +02:00
Michal Simek 40eb0dc456 microblaze: Remove additional loading
We don't need to save r0 to PT_R0. It could be additional
operation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:51 +02:00
Michal Simek 653e447e11 microblaze: Completely remove working with R11 register
We don't need to save R11 register. There is easy way
to use only R1 which is saved and restore later.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:50 +02:00
Michal Simek 0388107dd5 microblaze: Do not setup BIP in _debug_exception
BIP is already setup.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:50 +02:00
Michal Simek 06b2864038 microblaze: Simplify _debug_exception function
Keep together all arguments for send_sig function.
Move returning address to delay slot which is executed.
Remove additional send_sig loading. I am using IMM part of
rtbd instruction with r0.

old solution:
addik r11, r0, send_sig
rtbd r11, 0
nop

new solution:
rtbd r0, send_sig
nop

There is one instruction saving.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:48 +02:00
Michal Simek 8b110d157c microblaze: Optimize SAVE_STATE macro
It is necessary to setup BIP and EE and clear EIP
only for unaligned exception handler. The rest of
hw exception handlers don't require it.
HW exception occured and we are not in virtual mode.
That's why we can do operations protected by EIP.
Interrupt, next hw exception or syscall can't occur.

EIP is cleared by rted.

This change speedup page_fault hw exception handler
which is critical path.

There is also necessary to save R11 content before
flag setup for unaligned exception.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:48 +02:00
Michal Simek b9ea77e2d3 microblaze: trivial: Use la insted of addik
la is translated to addik by toolchain.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:47 +02:00
Michal Simek be304350dd microblaze: remove enable_irq from SAVE_STATE macro
SAVE_STATE macro is used in hw exceptions high level handling
functions. Hw exception doesn't disable IRQ that's why we don't
need to reenable it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:46 +02:00
Michal Simek 63708f635c microblaze: Move stack backup to SAVE_STATE macro
Remove code duplicity and move it to SAVE_STATE macro.
There is no impact on performance.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:45 +02:00
Michal Simek 96014cc39b microblaze: Move BIP setup to the end of ret_from_trap/ret_from_exc
We don't need to protect by BIP whole ret_from_trap/ret_from_exc code.
Only restoring from user/hw exception should be covered.
If BIP is setup, IRQ can't occur.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:45 +02:00
Michal Simek 5c0d72b1b3 microblaze: Remove PER_CPU(KM) variable
There is a way howto remove Kernel Mode variable. It is easier
to parse UMS bit in MSR to find out if I come from kernel or user
space. Loading MSR content should be in one cycle and loading
PER_CPU variable depends on memory state.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:44 +02:00
Michal Simek 3fbd93e58e microblaze: Optimize clear_vms_ums macro
We can save two instruction when MSR_VMS and MSR_UMS
are setup in one instruction.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:43 +02:00
Michal Simek 36f6095419 microblaze: Save and restore r3/r4 in SAVE/RESTORE_REGS macros
Save and restore R3/R4 registers in macros. This change
help to cleanup entry.S.

In ret_from_trap function we are saving returning value from
syscall to pt_regs on stack that's why we don't need to save and
restore these values before kernel functions (schedule, do_signal).

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:42 +02:00
Michal Simek a4a94dbf20 microblaze: Fix VM_ON and VM_OFF macros
Jump behind macro. We don't want to execute nop instruction again.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:42 +02:00
Michal Simek ca28b51016 microblaze: Do not use _start in vmlinux
_start symbol stores physical address where kernel is.
Gdb uses this symbol for their purpose that's why
we have to rename it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:41 +02:00
Michal Simek 61b403af8b microblaze: Cleanup boot/Makefile
Remove spaces and use tabs instead.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:40 +02:00
Michal Simek aee04d76d2 microblaze: Fix number of pvr regs
Microblaze has only 11 pvr regs according manual.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:39 +02:00
Michal Simek c8f77436d1 microblaze: Decrease time shifting values
Lower shifting values ensure that shifted 32bit counter
value doesn't exceed 64bit cycle variable too fast.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:39 +02:00
Michal Simek 615748aefa microblaze: Enable early printk only for uartlite
Microblaze has support for early printk. The second serial
driver (uart16550/8250) has no microblaze support for early
printk.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:38 +02:00
FUJITA Tomonori 75842abfd8 microblaze: remove unused HAVE_ARCH_PCI_SET_DMA_MASK
HAVE_ARCH_PCI_SET_DMA_MASK was removed in 2.6.34 (no architecture has
the own implementation of pci_set_dma_mask).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:37 +02:00
Michal Simek d0f140e03e microblaze: Do not trace cpu_relax function
IRQsoff tracer requires to protect cpu_idle function
to get correct timing report.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:36 +02:00
Michal Simek 6f34b08f58 microblaze: Improve ftrace time measuring
I had to comment sched_clock generic function because of broken toolchain.
It is fine grain timing.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:35 +02:00
Steven J. Magnani ce3266c047 microblaze: Add stack unwinder
Implement intelligent backtracing by searching for stack frame creation,
and emitting only return addresses. Use print_hex_dump() to display the
entire binary kernel stack.

Limitation: MMU kernels are not currently able to trace beyond a system trap
(interrupt, syscall, etc.). It is the intent of this patch to provide
infrastructure that can be extended to add this capability later.

Changes from V1:
* Removed checks in find_frame_creation() that prevented location of the frame
  creation instruction in heavily optimized code
* Various formatting/commenting/file location tweaks per review comments
* Dropped Kconfig option to enable STACKTRACE as something logically separate

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
2010-08-04 10:22:35 +02:00
Steven J. Magnani ba9c4f88d7 microblaze: Allow PAGE_SIZE configuration
Allow developer to configure memory page size at compile time.
Larger pages can improve performance on some workloads.

Based on PowerPC code.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:34 +02:00
Michal Simek 0d9ec762af microblaze: Trace hardirqs
Add trace_hardirqs_off and trace_hardirqs_on to do_IRQ function.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:33 +02:00
Michal Simek 570e3e236e microblaze: Fix sys_clone syscall
sys_clone syscall ignored args which this patch mapped to args
which are passing from glibc.

Here is the origin problem description.

"I ran the static libgcc tests (very few of them are there, they are
mostly dynamically linked) and some of  them fail with an assertion in
fork() system call (tid != pid), I looked at the microblaze/entry.S
file and it looks suspicious (ignores arguments 3-5)"

Arg mapping should be:
glibc ARCH_FORK(...) -> do_fork(...)
r5 -> r5   (clone_flags)
r6  -> r6 (stack_start, use parent->stack if NULL)
pt_regs -> r7 (pt_regs)
r7 -> r8 (stack_size)
r8 -> r9 (parent_tidptr)
r9 -> r10 (child_tidptr)

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:32 +02:00
Michal Simek 6847ba91a1 microblaze: Fix copy_to_user_page macro
copy_to_user_page macro is used in mm/memory.c:access_process_vm
function. This function is called from ptrace code (POKETEXT, POKEDATA)
which write data to memory. Microblaze handle physical address for
caches that's why there is virt_to_phys conversion.

There is potential one location which can caused the problem on WB system.

The important is take a look at write PTRACEs requests
(POKE/TEXT, DATA, USR).

Note:
Majority of Microblaze PTRACE code is moved to generic location
in newer kernel version that's why this solution should work on
the newest kernel version too.

linux/io.h is in cacheflush because of mm/nommu.c

Tested on a WB system - hello world debugging.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:31 +02:00
Michal Simek e05816679b microblaze: Sync noMMU and MMU setup_memory
Both versions can use the same node to register NODE_DATA(0)

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:30 +02:00
Michal Simek ef78705034 microblaze: Remove unused label
The label should be remove by
21e1c93631

Warning message:
arch/microblaze/mm/fault.c: In function 'do_page_fault':
arch/microblaze/mm/fault.c:229: warning: label 'survive' defined but not used

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:29 +02:00
Michal Simek 79e87830fa microblaze: Implement flush_dcache_page macro
flush_dcache_page macro is necessary to implement for
JFFS2 rootfs support on WB system.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:09 +02:00
Benjamin Herrenschmidt 76bfcc818f memblock/microblaze: Use new accessors
CC: Michal Simek <monstr@monstr.eu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-04 14:38:58 +10:00
Benjamin Herrenschmidt e3239ff92a memblock: Rename memblock_region to memblock_type and memblock_property to memblock_region
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-04 14:21:49 +10:00
Michal Simek af58ed854b microblaze: Fix comment for TLB
There is wrong comment for TLB. Early printk uartlite
console uses TLB 63.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-02 10:44:03 +02:00
Michal Simek 8d7ec6ee59 microblaze: Fix __copy_to/from_user_inatomic macros
__copy_to/from_user_inatomic should call __copy_to/from_user
because there is not necessary to check access because of kernel function.

might_sleep in copy_to/from_user macros is causing problems
in debug sessions too (CONFIG_DEBUG_SPINLOCK_SLEEP).

BUG: sleeping function called from invalid context at
.../arch/microblaze/include/asm/uaccess.h:388
in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper
1 lock held by swapper/1:
 #0:  (&p->cred_guard_mutex){......}, at: [<c00d4b90>] prepare_bprm_creds+0x2c/0x88
Kernel Stack:
...

Call Trace:
[<c0006bd4>] microblaze_unwind+0x7c/0x94
[<c0006684>] show_stack+0xf4/0x190
[<c0006730>] dump_stack+0x10/0x30
[<c00103a0>] __might_sleep+0x12c/0x160
[<c0090de4>] file_read_actor+0x1d8/0x2a8
[<c0091568>] generic_file_aio_read+0x6b4/0xa64
[<c00cd778>] do_sync_read+0xac/0x110
[<c00ce254>] vfs_read+0xc8/0x160
[<c00d585c>] kernel_read+0x38/0x64
[<c00d5984>] prepare_binprm+0xfc/0x130
[<c00d6430>] do_execve+0x228/0x370
[<c000614c>] microblaze_execve+0x58/0xa4

caused by file_read_actor (mm/filemap.c) which calls
__copy_to_user_inatomic.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-02 10:44:03 +02:00
Grant Likely 22ae782f86 of/address: Clean up function declarations
This patch moves the declaration of of_get_address(), of_get_pci_address(),
and of_pci_address_to_resource() out of arch code and into the common
linux/of_address header file.

This patch also fixes some of the asm/prom.h ordering issues.  It still
includes some header files that it ideally shouldn't be, but at least the
ordering is consistent now so that of_* overrides work.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-01 01:42:42 -06:00
Grant Likely 559e2b7ee7 of: Provide default of_node_to_nid() implementation.
of_node_to_nid() is only relevant in a few architectures.  Don't force
everyone to implement it anyway.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-30 00:03:58 -06:00
John Stultz 592913ecb8 time: Kill off CONFIG_GENERIC_TIME
Now that all arches have been converted over to use generic time via
clocksources or arch_gettimeoffset(), we can remove the GENERIC_TIME
config option and simplify the generic code.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <1279068988-21864-4-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-27 12:40:54 +02:00
Jonas Bonn c0dd394ca5 of: remove of_default_bus_ids
This list used was by only two platforms with all other platforms defining an
own list of valid bus id's to pass to of_platform_bus_probe.  This patch:

i)   copies the default list to the two platforms that depended on it (powerpc)
ii)  remove the usage of of_default_bus_ids in of_platform_bus_probe
iii) removes the definition of the list from all architectures that defined it

Passing a NULL 'matches' parameter to of_platform_bus_probe is still valid; the
function returns no error in that case as the NULL value is equivalent to an
empty list.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
[grant.likely@secretlab.ca: added __initdata annotations, warn on and return error on missing match table, and fix whitespace errors]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-24 09:58:22 -06:00
Jonas Bonn c608558407 of: make of_find_device_by_node generic
There's no need for this function to be architecture specific and all four
architectures defining it had the same definition.  The function has been
moved to drivers/of/platform.c.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
[grant.likely@secretlab.ca: moved to drivers/of/platform.c, simplified code, and added kerneldoc comment]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
2010-07-24 09:58:22 -06:00
Grant Likely de48e369e8 microblaze: remove references to of_device and to_of_device
of_device is just a #define alias to platform_device.  This patch
replaces all references to it with platform_device.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-24 09:58:22 -06:00
Grant Likely 2959604296 of: remove asm/of_device.h
It is mostly unused now.  Sparc has a few defines left in it, but they
can be moved to other headers.  Removing this header means that new
architectures adding CONFIG_OF support don't need to also add this
header file.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
2010-07-24 09:57:52 -06:00
Grant Likely 129ac799ad of: remove asm/of_platform.h
Only thing left in it is of_instantiate_rtc() which can be moved to
asm/prom.h on PowerPC and is unused in microblaze.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
2010-07-24 09:57:52 -06:00
Grant Likely 1ab1d63a85 of/platform: remove all of_bus_type and of_platform_bus_type references
Both of_bus_type and of_platform_bus_type are just #define aliases
for the platform bus.  This patch removes all references to them and
switches to the of_register_platform_driver()/of_unregister_platform_driver()
API for registering.

Subsequent patches will convert each user of of_register_platform_driver()
into plain platform_drivers without the of_platform_driver shim.  At which
point the of_register_platform_driver()/of_unregister_platform_driver()
functions can be removed.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
2010-07-24 09:57:52 -06:00
Grant Likely eca3930163 of: Merge of_platform_bus_type with platform_bus_type
of_platform_bus was being used in the same manner as the platform_bus.
The only difference being that of_platform_bus devices are generated
from data in the device tree, and platform_bus devices are usually
statically allocated in platform code.  Having them separate causes
the problem of device drivers having to be registered twice if it
was possible for the same device to appear on either bus.

This patch removes of_platform_bus_type and registers all of_platform
bus devices and drivers on the platform bus instead.  A previous patch
made the of_device structure an alias for the platform_device structure,
and a shim is used to adapt of_platform_drivers to the platform bus.

After all of of_platform_bus drivers are converted to be normal platform
drivers, the shim code can be removed.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
2010-07-24 09:57:51 -06:00
Grant Likely 4e4f62bf73 Merge commit 'v2.6.35-rc6' into devicetree/next
Conflicts:
	arch/sparc/kernel/prom_64.c
2010-07-24 09:49:13 -06:00
Ingo Molnar 9dcdbf7a33 Merge branch 'linus' into perf/core
Merge reason: Pick up the latest perf fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-07-21 21:43:06 +02:00
Grant Likely c5f5849bff of: Remove unused of_find_device_by_phandle()
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-18 22:39:36 -06:00
Grant Likely f1d4c3a769 of/flattree: Use common ALIGN() macro instead of arch specific _ALIGN
There's no reason to use the powerpc-specific _ALIGN macro in the fdt
code.  Replace it with ALIGN() from kernel.h

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-By: Jeremy Kerr <jeremy.kerr@canonical.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-14 23:55:23 -06:00
Yinghai Lu 95f72d1ed4 lmb: rename to memblock
via following scripts

      FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

      sed -i \
        -e 's/lmb/memblock/g' \
        -e 's/LMB/MEMBLOCK/g' \
        $FILES

      for N in $(find . -name lmb.[ch]); do
        M=$(echo $N | sed 's/lmb/memblock/g')
        mv $N $M
      done

and remove some wrong change like lmbench and dlmb etc.

also move memblock.c from lib/ to mm/

Suggested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-14 17:14:00 +10:00
Andres Salomon ef2a4524d6 proc: unify PROC_DEVICETREE config
Microblaze and PPC both use PROC_DEVICETREE, and OLPC will as well.. put
the Kconfig option into fs/ rather than in arch/*/Kconfig.

Signed-off-by: Andres Salomon <dilinger@queued.net>
[grant.likely@secretlab.ca: changed depends to PROC_FS && !SPARC]
[grant.likely@secretlab.ca: moved to drivers/of/Kconfig]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-05 16:46:43 -06:00
Grant Likely 5ab5fc7e35 of: Put all CONFIG_OF dependencies into a Kconfig menu block
All of the options in drivers/of/Kconfig depend on CONFIG_OF.  Putting
all of them inside a menu block simplifies the dependency statements.
It also creates a logical group for adding user selectable OF options.

This patch also changes (PPC_OF || MICROBLAZE) statements to (!SPARC)
so that those options are available to other architectures (and in
fact the !SPARC conditions should probably be re-evalutated since the
code is more generic now)

This patch also moves the definition of CONFIG_DTC from arch/* to
drivers/of/Kconfig

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-05 16:14:55 -06:00
Stephen Rothwell dd5e73794c of: remove architecture CONFIG_OF definitions
now that CONFIG_OF is defined globally

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-05 16:14:54 -06:00
Stephen Rothwell ae5bf63f2d microblaze: turn CONFIG_OF into a select
so that we can make CONFIG_OF global and remove it from
the architecture Kconfig files later.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-05 16:14:53 -06:00
Grant Likely 594fa265e0 of/gpio: stop using device_node data pointer to find gpio_chip
Currently the kernel uses the struct device_node.data pointer to resolve
a struct gpio_chip pointer from a device tree node.  However, the .data
member doesn't provide any type checking and there aren't any rules
enforced on what it should be used for.  There's no guarantee that the
data stored in it actually points to an gpio_chip pointer.

Instead of relying on the .data pointer, this patch modifies the code
to add a lookup function which scans through the registered gpio_chips
and returns the gpio_chip that has a pointer to the specified
device_node.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Anton Vorontsov <avorontsov@ru.mvista.com>
CC: Grant Likely <grant.likely@secretlab.ca>
CC: David Brownell <dbrownell@users.sourceforge.net>
CC: Bill Gatliff <bgat@billgatliff.com>
CC: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Jean Delvare <khali@linux-fr.org>
CC: linux-kernel@vger.kernel.org
CC: devicetree-discuss@lists.ozlabs.org
2010-07-05 16:14:30 -06:00
Anton Vorontsov a19e3da5bc of/gpio: Kill of_gpio_chip and add members directly to gpio_chip
The OF gpio infrastructure is great for describing GPIO connections within
the device tree.  However, using a GPIO binding still requires changes to
the gpio controller just to add an of_gpio structure.  In most cases, the
gpio controller doesn't actually need any special support and the simple
OF gpio mapping function is more than sufficient.  Additional, the current
scheme of using of_gpio_chip requires a convoluted scheme to maintain
1:1 mappings between of_gpio_chip and gpio_chip instances.

If the struct of_gpio_chip data members were moved into struct gpio_chip,
then it would simplify the processing of OF gpio bindings, and it would
make it trivial to use device tree OF connections on existing gpiolib
controller drivers.

This patch eliminates the of_gpio_chip structure and moves the relevant
fields into struct gpio_chip (conditional on CONFIG_OF_GPIO).  This move
simplifies the existing code and prepares for adding automatic device tree
support to existing drivers.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Bill Gatliff <bgat@billgatliff.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean Delvare <khali@linux-fr.org>
2010-07-05 16:14:30 -06:00
Grant Likely 94c0931983 of: Merge of_device_alloc() and of_device_make_bus_id()
This patch merges the common routines of_device_alloc() and
of_device_make_bus_id() from powerpc and microblaze.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Michal Simek <monstr@monstr.eu>
CC: Grant Likely <grant.likely@secretlab.ca>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: microblaze-uclinux@itee.uq.edu.au
CC: linuxppc-dev@ozlabs.org
CC: devicetree-discuss@lists.ozlabs.org
2010-07-05 16:14:29 -06:00
Grant Likely 5fd200f3b3 of/device: Merge of_platform_bus_probe()
Merge common code between PowerPC and microblaze.  This patch merges
the code that scans the tree and registers devices.  The functions
merged are of_platform_bus_probe(), of_platform_bus_create(), and
of_platform_device_create().

This patch also move the of_default_bus_ids[] table out of a Microblaze
header file and makes it non-static.  The device ids table isn't merged
because powerpc and microblaze use different default data.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Michal Simek <monstr@monstr.eu>
CC: Grant Likely <grant.likely@secretlab.ca>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: microblaze-uclinux@itee.uq.edu.au
CC: linuxppc-dev@ozlabs.org
2010-07-05 16:14:28 -06:00
Grant Likely 34a1c1e8c7 of: Modify of_device_get_modalias to be passed struct device
Now that the of_node pointer is part of struct device,
of_device_get_modalias could be used on any struct device
that has the device node pointer set.  This patch changes
of_device_get_modalias to accept a struct device instead
of a struct of_device.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Michal Simek <monstr@monstr.eu>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: microblaze-uclinux@itee.uq.edu.au
CC: linuxppc-dev@ozlabs.org
2010-07-05 16:14:28 -06:00
Grant Likely dd27dcda37 of/device: merge of_device_uevent
Merge common code between powerpc and microblaze

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Michal Simek <monstr@monstr.eu>
CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: microblaze-uclinux@itee.uq.edu.au
CC: linuxppc-dev@ozlabs.org
2010-07-05 16:14:28 -06:00
Grant Likely dbbdee9473 of/address: Merge all of the bus translation code
Microblaze and PowerPC share a large chunk of code for translating
OF device tree data into usable addresses.  Differences between the two
consist of cosmetic differences, and the addition of dma-ranges support
code to powerpc but not microblaze.  This patch moves the powerpc
version into common code and applies many of the cosmetic (non-functional)
changes from the microblaze version.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Michal Simek <monstr@monstr.eu>
CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
2010-07-05 16:14:26 -06:00
Grant Likely 1f5bef30cf of/address: merge of_address_to_resource()
Merge common code between PowerPC and Microblaze.  This patch also
moves the prototype of pci_address_to_pio() out of pci-bridge.h and
into prom.h because the only user of pci_address_to_pio() is
of_address_to_resource().

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Michal Simek <monstr@monstr.eu>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
2010-07-05 16:14:26 -06:00
Grant Likely 6b884a8d50 of/address: merge of_iomap()
Merge common code between Microblaze and PowerPC.  This patch creates
new of_address.h and address.c files to containing address translation
and mapping routines.  First routine to be moved it of_iomap()

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Michal Simek <monstr@monstr.eu>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
2010-07-05 16:14:26 -06:00
Grant Likely 7dc2e1134a of/irq: merge irq mapping code
Merge common irq mapping code between PowerPC and Microblaze.

This patch merges of_irq_find_parent(), of_irq_map_raw() and
of_irq_map_one().  The functions are dependent on one another, so all
three are merged in a single patch.  Other than cosmetic difference
(ie. DBG() vs. pr_debug()), the implementations are identical.

of_irq_to_resource() is also merged, but in this case the
implementations are different.  This patch drops the microblaze version
and uses the powerpc implementation unchanged.  The microblaze version
essentially open-coded irq_of_parse_and_map() which it does not need
to do.  Therefore the powerpc version is safe to adopt.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Michal Simek <monstr@monstr.eu>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
2010-07-05 16:14:25 -06:00
Grant Likely b6295c8b85 of/microblaze: strip out of_irq_workarounds code
Microblaze doesn't have any legacy workaround in the device tree irq
mapping data.  All of the of_irq_workarounds stuff can be dropped

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2010-07-05 16:14:24 -06:00
Grant Likely e387344499 of/irq: Move irq_of_parse_and_map() to common code
Merge common code between PowerPC and Microblaze.  SPARC implements
irq_of_parse_and_map(), but the implementation is different, so it
does not use this code.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
2010-06-28 12:41:33 -07:00
Grant Likely b505ff5e72 of: kill struct of_device
Now that the device tree node pointer has been moved out of struct
of_device and into the common struct device, there isn't anything
unique about of_device anymore.  In fact, there isn't much need
for a separate of_bus when all busses have access to OF style
probing.

arch/powerpc and arch/microblaze are moving away from using the of_bus
and using the regular platform bus instead for mmio devices.  This
patch makes of_device the same as platform_device as a stepping stone
in migrating of_platform_drivers over to the platform bus.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2010-06-28 12:41:33 -07:00
Ingo Molnar 646b1db495 Merge commit 'v2.6.35-rc3' into perf/core
Merge reason: Go from -rc1 base to -rc3 base, merge in fixes.
2010-06-18 10:53:19 +02:00
Jiri Kosina f1bbbb6912 Merge branch 'master' into for-next 2010-06-16 18:08:13 +02:00
Uwe Kleine-König 732bee7af3 fix typos concerning "hierarchy"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-16 18:03:14 +02:00
Eric Dumazet 5933dd2f02 net: NET_SKB_PAD should depend on L1_CACHE_BYTES
In old kernels, NET_SKB_PAD was defined to 16.

Then commit d6301d3dd1 (net: Increase default NET_SKB_PAD to 32), and
commit 18e8c134f4 (net: Increase NET_SKB_PAD to 64 bytes) increased it
to 64.

While first patch was governed by network stack needs, second was more
driven by performance issues on current hardware. Real intent was to
align data on a cache line boundary.

So use max(32, L1_CACHE_BYTES) instead of 64, to be more generic.

Remove microblaze and powerpc own NET_SKB_PAD definitions.

Thanks to Alexander Duyck and David Miller for their comments.

Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 18:16:43 -07:00
Linus Torvalds eda054770e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: clear bridge resource range if BIOS assigned bad one
  PCI: hotplug/cpqphp, fix NULL dereference
  Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
  PCI: change resource collision messages from KERN_ERR to KERN_INFO
2010-06-11 14:15:44 -07:00
Yinghai Lu 837c4ef13c PCI: clear bridge resource range if BIOS assigned bad one
Yannick found that video does not work with 2.6.34.  The cause of this
bug was that the BIOS had assigned the wrong range to the PCI bridge
above the video device.  Before 2.6.34 the kernel would have shrunk
the size of the bridge window, but since
  d65245c PCI: don't shrink bridge resources
the kernel will avoid shrinking BIOS ranges.

So zero out the old range if we fail to claim it at boot time; this will
cause us to allocate a new range at startup, restoring the 2.6.34
behavior.

Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009.

Reported-by: Yannick <yannick.roehlly@free.fr>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11 13:24:51 -07:00
FUJITA Tomonori fcdcddbcbb microblaze: Fix sg_dma_len() regression
The commit "asm-generic: add NEED_SG_DMA_LENGTH to define sg_dma_len()"
18e98307de broke microblaze compilation.

dma_direct_map_sg() sets sg->dma_length, however microblaze doesn't
set NEED_SG_DMA_LENGTH so scatterlist strcutres doesn't include
dma_length.

sg->dma_length is always equal to sg->length on microblaze. So we
don't need to set set dma_length, that is, microblaze can simply use
sg->length.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-06-09 16:20:54 +02:00
Michal Simek ffe57d02b2 microblaze: Define ARCH_SLAB_MINALIGN to fix slab crash
The commit "mm: Move ARCH_SLAB_MINALIGN and
ARCH_KMALLOC_MINALIGN to <linux/slab_def.h>"
1f0ce8b3dd which moved the ARCH_SLAB_MINALIGN
default into the global header broke FLAT for Microblaze.

Error message:
slab error in verify_redzone_free(): cache `idr_layer_cache':
memory outside object was overwritten

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-06-09 16:20:43 +02:00
Peter Zijlstra 1996bda2a4 arch: Implement local64_t
On 64bit, local_t is of size long, and thus we make local64_t an alias.
On 32bit, we fall back to atomic64_t. (architecture can provide optimized
32-bit version)

(This new facility is to be used by perf events optimizations.)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-arch@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-09 11:12:36 +02:00
FUJITA Tomonori 1ef04370d8 asm-generic: remove ARCH_HAS_SG_CHAIN in scatterlist.h
There are more architectures that don't support ARCH_HAS_SG_CHAIN than
those that support it.  This removes removes ARCH_HAS_SG_CHAIN in
asm-generic/scatterlist.h and lets arhictectures to define it.

It's clearer than defining ARCH_HAS_SG_CHAIN asm-generic/scatterlist.h and
undefing it in arhictectures that don't support it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:54 -07:00
FUJITA Tomonori 204f3a0444 asm-generic: remove ISA_DMA_THRESHOLD in scatterlist.h
This is the first half of the attempt to use asm-generic/scatterlist.h
on every architecture.

There are only two ways to define scatterlist structure. So it's easy
to convert every architecture to use asm-generic/scatterlist.h.

This patch:

The trick for ISA_DMA_THRESHOLD in asm-generic/scatterlist.h doesn't work
for powerpc.  This lets architectures defin ISA_DMA_THRESHOLD.

Hopefully, we can remove ISA_DMA_THRESHOLD in the future; we can do better
to decide if the bouncing is necessary or not.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:54 -07:00