Pull networking fixes from David Miller:
"Fixes here and there, a couple new device IDs, as usual:
1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.
2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.
3) Fix documentation for some eBPF helpers, from Quentin Monnet.
4) Some UAPI bpf header sync with tools, also from Quentin Monnet.
5) Set descriptor ownership bit at the right time for jumbo frames in
stmmac driver, from Aaro Koskinen.
6) Set IFF_UP properly in tun driver, from Eric Dumazet.
7) Fix load/store doubleword instruction generation in powerpc eBPF
JIT, from Naveen N. Rao.
8) nla_nest_start() return value checks all over, from Kangjie Lu.
9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
merge window. From Marcelo Ricardo Leitner and Xin Long.
10) Fix memory corruption with large MTUs in stmmac, from Aaro
Koskinen.
11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
Dumazet.
12) Fix topology subscription cancellation in tipc, from Erik Hugne.
13) Memory leak in genetlink error path, from Yue Haibing.
14) Valid control actions properly in packet scheduler, from Davide
Caratti.
15) Even if we get EEXIST, we still need to rehash if a shrink was
delayed. From Herbert Xu.
16) Fix interrupt mask handling in interrupt handler of r8169, from
Heiner Kallweit.
17) Fix leak in ehea driver, from Wen Yang"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
dpaa2-eth: fix race condition with bql frame accounting
chelsio: use BUG() instead of BUG_ON(1)
net: devlink: skip info_get op call if it is not defined in dumpit
net: phy: bcm54xx: Encode link speed and activity into LEDs
tipc: change to check tipc_own_id to return in tipc_net_stop
net: usb: aqc111: Extend HWID table by QNAP device
net: sched: Kconfig: update reference link for PIE
net: dsa: qca8k: extend slave-bus implementations
net: dsa: qca8k: remove leftover phy accessors
dt-bindings: net: dsa: qca8k: support internal mdio-bus
dt-bindings: net: dsa: qca8k: fix example
net: phy: don't clear BMCR in genphy_soft_reset
bpf, libbpf: clarify bump in libbpf version info
bpf, libbpf: fix version info and add it to shared object
rxrpc: avoid clang -Wuninitialized warning
tipc: tipc clang warning
net: sched: fix cleanup NULL pointer exception in act_mirr
r8169: fix cable re-plugging issue
net: ethernet: ti: fix possible object reference leak
net: ibm: fix possible object reference leak
...
Alexei Starovoitov says:
====================
pull-request: bpf 2019-03-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) libbpf verision fix up from Daniel.
2) fix liveness propagation from Jakub.
3) fix verbose print of refcounted regs from Martin.
4) fix for large map allocations from Martynas.
5) fix use after free in sanitize_ptr_alu from Xu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The current documentation suggests that we would need to bump the
libbpf version on every change. Lets clarify this a bit more and
reflect what we do today in practice, that is, bumping it once per
development cycle.
Fixes: 76d1b894c5 ("libbpf: Document API and ABI conventions")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Even though libbpf's versioning script for the linker (libbpf.map)
is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has
not been updated along with it and is therefore still on 0.0.1.
While fixing up, I also noticed that the generated shared object
versioning information is missing, typical convention is to have
a linker name (libbpf.so), soname (libbpf.so.0) and real name
(libbpf.so.0.0.2) for library management. This is based upon the
LIBBPF_VERSION as well.
The build will then produce the following bpf libraries:
# ll libbpf*
libbpf.a
libbpf.so -> libbpf.so.0.0.2
libbpf.so.0 -> libbpf.so.0.0.2
libbpf.so.0.0.2
# readelf -d libbpf.so.0.0.2 | grep SONAME
0x000000000000000e (SONAME) Library soname: [libbpf.so.0]
And install them accordingly:
# rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
CC /tmp/bld/libbpf.o
CC /tmp/bld/bpf.o
CC /tmp/bld/nlattr.o
CC /tmp/bld/btf.o
CC /tmp/bld/libbpf_errno.o
CC /tmp/bld/str_error.o
CC /tmp/bld/netlink.o
CC /tmp/bld/bpf_prog_linfo.o
CC /tmp/bld/libbpf_probes.o
CC /tmp/bld/xsk.o
LD /tmp/bld/libbpf-in.o
LINK /tmp/bld/libbpf.a
LINK /tmp/bld/libbpf.so.0.0.2
LINK /tmp/bld/test_libbpf
INSTALL /tmp/bld/libbpf.a
INSTALL /tmp/bld/libbpf.so.0.0.2
# ll /usr/local/lib64/libbpf.*
/usr/local/lib64/libbpf.a
/usr/local/lib64/libbpf.so -> libbpf.so.0.0.2
/usr/local/lib64/libbpf.so.0 -> libbpf.so.0.0.2
/usr/local/lib64/libbpf.so.0.0.2
Fixes: 1bf4b05810 ("tools: bpftool: add probes for eBPF program types")
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull perf updates from Thomas Gleixner:
"A larger set of perf updates.
Not all of them are strictly fixes, but that's solely the tip
maintainers fault as they let the timely -rc1 pull request fall
through the cracks for various reasons including travel. So I'm
sending this nevertheless because rebasing and distangling fixes and
updates would be a mess and risky as well. As of tomorrow, a strict
fixes separation is happening again. Sorry for the slip-up.
Kernel:
- Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different
consumers of the mmap event get what they requested.
Tools:
- A larger set of updates to perf record/report/scripts vs. time
stamp handling
- More Python3 fixups
- A pile of memory leak plumbing
- perf BPF improvements and fixes
- Finalize the perf.data directory storage"
[ Note: the kernel part is strictly a fix, the updates are purely to
tooling - Linus ]
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
perf bpf: Show more BPF program info in print_bpf_prog_info()
perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog()
perf tools: Save bpf_prog_info and BTF of new BPF programs
perf evlist: Introduce side band thread
perf annotate: Enable annotation of BPF programs
perf build: Check what binutils's 'disassembler()' signature to use
perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation
perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO
perf feature detection: Add -lopcodes to feature-libbfd
perf top: Add option --no-bpf-event
perf bpf: Save BTF information as headers to perf.data
perf bpf: Save BTF in a rbtree in perf_env
perf bpf: Save bpf_prog_info information as headers to perf.data
perf bpf: Save bpf_prog_info in a rbtree in perf_env
perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool
perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()
bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()
tools lib bpf: Introduce bpf_program__get_prog_info_linear()
perf record: Replace option --bpf-event with --no-bpf-event
perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
...
Pull core fixes from Thomas Gleixner:
"Two small fixes:
- Move the large objtool_file struct off the stack so objtool works
in setups with a tight stack limit.
- Make a few variables static in the watchdog core code"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
watchdog/core: Make variables static
objtool: Move objtool_file struct off the stack
BPF:
Song Liu:
- Add support for annotating BPF programs, using the PERF_RECORD_BPF_EVENT
and PERF_RECORD_KSYMBOL recently added to the kernel and plugging
binutils's libopcodes disassembly of BPF programs with the existing
annotation interfaces in 'perf annotate', 'perf report' and 'perf top'
various output formats (--stdio, --stdio2, --tui).
perf list:
Andi Kleen:
- Filter metrics when using substring search.
perf record:
Andi Kleen:
- Allow to limit number of reported perf.data files
- Clarify help for --switch-output.
perf report:
Andi Kleen
- Indicate JITed code better.
- Show all sort keys in help output.
perf script:
Andi Kleen:
- Support relative time.
perf stat:
Andi Kleen:
- Improve scaling.
General:
Changbin Du:
- Fix some mostly error path memory and reference count leaks found
using gcc's ASan and UBSan.
Vendor events:
Mamatha Inamdar:
- Remove P8 HW events which are not supported.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXJOmigAKCRCyPKLppCJ+
J+EPAQDNzH1M3uJ6cOhyzAMowpsl0Dgs0Q+5iNlOnDYVr2RfhgEA2Sr2fQyl/qiG
h6jRbzvdE+PTXbcMNO79ajmufAHdLgQ=
=DuTU
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.1-20190321' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo:
BPF:
Song Liu:
- Add support for annotating BPF programs, using the PERF_RECORD_BPF_EVENT
and PERF_RECORD_KSYMBOL recently added to the kernel and plugging
binutils's libopcodes disassembly of BPF programs with the existing
annotation interfaces in 'perf annotate', 'perf report' and 'perf top'
various output formats (--stdio, --stdio2, --tui).
perf list:
Andi Kleen:
- Filter metrics when using substring search.
perf record:
Andi Kleen:
- Allow to limit number of reported perf.data files
- Clarify help for --switch-output.
perf report:
Andi Kleen
- Indicate JITed code better.
- Show all sort keys in help output.
perf script:
Andi Kleen:
- Support relative time.
perf stat:
Andi Kleen:
- Improve scaling.
General:
Changbin Du:
- Fix some mostly error path memory and reference count leaks found
using gcc's ASan and UBSan.
Vendor events:
Mamatha Inamdar:
- Remove P8 HW events which are not supported.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
kernel:
Stephane Eranian :
- Restore mmap record type correctly when handling PERF_RECORD_MMAP2
events, as the same template is used for all the threads interested
in mmap events, some may want just PERF_RECORD_MMAP, while some
may want the extra info in MMAP2 records.
perf probe:
Adrian Hunter:
- Fix getting the kernel map, because since changes related to x86 PTI
entry trampolines handling, there are more than one kernel map.
perf script:
Andi Kleen:
- Support insn output for normal samples, i.e.:
perf script -F ip,sym,insn --xed
Will fetch the sample IP from the thread address space and feed it
to Intel's XED disassembler, producing lines such as:
ffffffffa4068804 native_write_msr wrmsr
ffffffffa415b95e __hrtimer_next_event_base movq 0x18(%rax), %rdx
That match 'perf annotate's output.
- Make the --cpu filter apply to PERF_RECORD_COMM/FORK/... events, in
addition to PERF_RECORD_SAMPLE.
perf report:
- Add a new --samples option to save a small random number of samples
per hist entry, using a reservoir technique to select a representative
number of samples.
Then allow browsing the samples using 'perf script' as part of the hist
entry context menu. This automatically adds the right filters, so only
the thread or CPU of the sample is displayed. Then we use less' search
functionality to directly jump to the time stamp of the selected sample.
It uses different menus for assembler and source display. Assembler
needs xed installed and source needs debuginfo.
- Fix the UI browser scripts pop up menu when there are many scripts
available.
perf report:
Andi Kleen:
- Add 'time' sort option. E.g.:
% perf report --sort time,overhead,symbol --time-quantum 1ms --stdio
...
0.67% 277061.87300 [.] _dl_start
0.50% 277061.87300 [.] f1
0.50% 277061.87300 [.] f2
0.33% 277061.87300 [.] main
0.29% 277061.87300 [.] _dl_lookup_symbol_x
0.29% 277061.87300 [.] dl_main
0.29% 277061.87300 [.] do_lookup_x
0.17% 277061.87300 [.] _dl_debug_initialize
0.17% 277061.87300 [.] _dl_init_paths
0.08% 277061.87300 [.] check_match
0.04% 277061.87300 [.] _dl_count_modids
1.33% 277061.87400 [.] f1
1.33% 277061.87400 [.] f2
1.33% 277061.87400 [.] main
1.17% 277061.87500 [.] main
1.08% 277061.87500 [.] f1
1.08% 277061.87500 [.] f2
1.00% 277061.87600 [.] main
0.83% 277061.87600 [.] f1
0.83% 277061.87600 [.] f2
1.00% 277061.87700 [.] main
tools headers:
Arnaldo Carvalho de Melo:
- Update x86's syscall_64.tbl, no change in tools/perf behaviour.
- Sync copies asm-generic/unistd.h and linux/in with the kernel sources.
perf data:
Jiri Olsa:
- Prep work to support having perf.data stored as a directory, with one
file per CPU, that ultimately will allow having one ring buffer reading
thread per CPU.
Vendor events:
Martin Liška:
- perf PMU events for AMD Family 17h.
perf script python:
Tony Jones:
- Add python3 support for the remaining Intel PT related scripts, with
these we should have a clean build of perf with python3 while still
supporting the build with python2.
libbpf:
Arnaldo Carvalho de Melo:
- Fix the build on uCLibc, adding the missing stdarg.h since we use
va_list in one typedef.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXIbMlgAKCRCyPKLppCJ+
J/fzAQDNlP1cEuryAfWCDZ/sf5N/76srvkt/kIyYO0CliCjiBAEAiHRWrhsNs1Gd
Z8626lCTYt7BTdz5yfTb7gbt/n7xNAY=
=Ycye
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.1-20190311' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo:
kernel:
Stephane Eranian :
- Restore mmap record type correctly when handling PERF_RECORD_MMAP2
events, as the same template is used for all the threads interested
in mmap events, some may want just PERF_RECORD_MMAP, while some
may want the extra info in MMAP2 records.
perf probe:
Adrian Hunter:
- Fix getting the kernel map, because since changes related to x86 PTI
entry trampolines handling, there are more than one kernel map.
perf script:
Andi Kleen:
- Support insn output for normal samples, i.e.:
perf script -F ip,sym,insn --xed
Will fetch the sample IP from the thread address space and feed it
to Intel's XED disassembler, producing lines such as:
ffffffffa4068804 native_write_msr wrmsr
ffffffffa415b95e __hrtimer_next_event_base movq 0x18(%rax), %rdx
That match 'perf annotate's output.
- Make the --cpu filter apply to PERF_RECORD_COMM/FORK/... events, in
addition to PERF_RECORD_SAMPLE.
perf report:
- Add a new --samples option to save a small random number of samples
per hist entry, using a reservoir technique to select a representative
number of samples.
Then allow browsing the samples using 'perf script' as part of the hist
entry context menu. This automatically adds the right filters, so only
the thread or CPU of the sample is displayed. Then we use less' search
functionality to directly jump to the time stamp of the selected sample.
It uses different menus for assembler and source display. Assembler
needs xed installed and source needs debuginfo.
- Fix the UI browser scripts pop up menu when there are many scripts
available.
perf report:
Andi Kleen:
- Add 'time' sort option. E.g.:
% perf report --sort time,overhead,symbol --time-quantum 1ms --stdio
...
0.67% 277061.87300 [.] _dl_start
0.50% 277061.87300 [.] f1
0.50% 277061.87300 [.] f2
0.33% 277061.87300 [.] main
0.29% 277061.87300 [.] _dl_lookup_symbol_x
0.29% 277061.87300 [.] dl_main
0.29% 277061.87300 [.] do_lookup_x
0.17% 277061.87300 [.] _dl_debug_initialize
0.17% 277061.87300 [.] _dl_init_paths
0.08% 277061.87300 [.] check_match
0.04% 277061.87300 [.] _dl_count_modids
1.33% 277061.87400 [.] f1
1.33% 277061.87400 [.] f2
1.33% 277061.87400 [.] main
1.17% 277061.87500 [.] main
1.08% 277061.87500 [.] f1
1.08% 277061.87500 [.] f2
1.00% 277061.87600 [.] main
0.83% 277061.87600 [.] f1
0.83% 277061.87600 [.] f2
1.00% 277061.87700 [.] main
tools headers:
Arnaldo Carvalho de Melo:
- Update x86's syscall_64.tbl, no change in tools/perf behaviour.
- Sync copies asm-generic/unistd.h and linux/in with the kernel sources.
perf data:
Jiri Olsa:
- Prep work to support having perf.data stored as a directory, with one
file per CPU, that ultimately will allow having one ring buffer reading
thread per CPU.
Vendor events:
Martin Liška:
- perf PMU events for AMD Family 17h.
perf script python:
Tony Jones:
- Add python3 support for the remaining Intel PT related scripts, with
these we should have a clean build of perf with python3 while still
supporting the build with python2.
libbpf:
Arnaldo Carvalho de Melo:
- Fix the build on uCLibc, adding the missing stdarg.h since we use
va_list in one typedef.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 7640ead939 ("bpf: verifier: make sure callees don't prune
with caller differences") connected up parentage chains of all
frames of the stack. It didn't, however, ensure propagate_liveness()
propagates all liveness information along those chains.
This means pruning happening in the callee may generate explored
states with incomplete liveness for the chains in lower frames
of the stack.
The included selftest is similar to the prior one from commit
7640ead939 ("bpf: verifier: make sure callees don't prune with
caller differences"), where callee would prune regardless of the
difference in r8 state.
Now we also initialize r9 to 0 or 1 based on a result from get_random().
r9 is never read so the walk with r9 = 0 gets pruned (correctly) after
the walk with r9 = 1 completes.
The selftest is so arranged that the pruning will happen in the
callee. Since callee does not propagate read marks of r8, the
explored state at the pruning point prior to the callee will
now ignore r8.
Propagate liveness on all frames of the stack when pruning.
Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch enables showing bpf program name, address, and size in the
header.
Before the patch:
perf report --header-only
...
# bpf_prog_info of id 9
# bpf_prog_info of id 10
# bpf_prog_info of id 13
After the patch:
# bpf_prog_info 9: bpf_prog_7be49e3934a125ba addr 0xffffffffa0024947 size 229
# bpf_prog_info 10: bpf_prog_2a142ef67aaad174 addr 0xffffffffa007c94d size 229
# bpf_prog_info 13: bpf_prog_47368425825d7384_task__task_newt addr 0xffffffffa0251137 size 369
Committer notes:
Fix the fallback definition when HAVE_LIBBPF_SUPPORT is not defined,
i.e. add the missing 'static inline' and add the __maybe_unused to the
args. Also add stdio.h since we now use FILE * in bpf-event.h.
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190319165454.1298742-3-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extract logic to create program names to synthesize_bpf_prog_name(), so
that it can be reused in header.c:print_bpf_prog_info().
This commit doesn't change the behavior.
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190319165454.1298742-2-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To fully annotate BPF programs with source code mapping, 4 different
information are needed:
1) PERF_RECORD_KSYMBOL
2) PERF_RECORD_BPF_EVENT
3) bpf_prog_info
4) btf
This patch handles 3) and 4) for BPF programs loaded after 'perf
record|top'.
For timely process of these information, a dedicated event is added to
the side band evlist.
When PERF_RECORD_BPF_EVENT is received via the side band event, the
polling thread gathers 3) and 4) vis sys_bpf and store them in perf_env.
This information is saved to perf.data at the end of 'perf record'.
Committer testing:
The 'wakeup_watermark' member in 'struct perf_event_attr' is inside a
unnamed union, so can't be used in a struct designated initialization
with older gccs, get it out of that, isolating as 'attr.wakeup_watermark
= 1;' to work with all gcc versions.
We also need to add '--no-bpf-event' to the 'perf record'
perf_event_attr tests in 'perf test', as the way that that test goes is
to intercept the events being setup and looking if they match the fields
described in the control files, since now it finds first the side band
event used to catch the PERF_RECORD_BPF_EVENT, they all fail.
With these issues fixed:
Same scenario as for testing BPF programs loaded before 'perf record' or
'perf top' starts, only start the BPF programs after 'perf record|top',
so that its information get collected by the sideband threads, the rest
works as for the programs loaded before start monitoring.
Add missing 'inline' to the bpf_event__add_sb_event() when
HAVE_LIBBPF_SUPPORT is not defined, fixing the build in systems without
binutils devel files installed.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-16-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces side band thread that captures extended
information for events like PERF_RECORD_BPF_EVENT.
This new thread uses its own evlist that uses ring buffer with very low
watermark for lower latency.
To use side band thread, we need to:
1. add side band event(s) by calling perf_evlist__add_sb_event();
2. calls perf_evlist__start_sb_thread();
3. at the end of perf run, perf_evlist__stop_sb_thread().
In the next patch, we use this thread to handle PERF_RECORD_BPF_EVENT.
Committer notes:
Add fix by Jiri Olsa for when te sb_tread can't get started and then at
the end the stop_sb_thread() segfaults when joining the (non-existing)
thread.
That can happen when running 'perf top' or 'perf record' as a normal
user, for instance.
Further checks need to be done on top of this to more graciously handle
these possible failure scenarios.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-15-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Objtool uses over 512k of stack, thanks to the hash table embedded in
the objtool_file struct. This causes an unnecessarily large stack
allocation and breaks users with low stack limits.
Move the struct off the stack.
Fixes: 042ba73fe7 ("objtool: Add several performance improvements")
Reported-by: Vassili Karpov <moosotc@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/df92dcbc4b84b02ffa252f46876df125fb56e2d7.1552954176.git.jpoimboe@redhat.com
Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils
repo, which changed the disassembler() function signature, so we must
use the feature test introduced in fb982666e3 ("tools/bpftool: fix
bpftool build with bintutils >= 2.9") to deal with that.
Committer testing:
After adding the missing function call to test-all.c, and:
FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes
And the fallbacks for cases where we need -liberty and sometimes -lz to
tools/perf/Makefile.config, we get:
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... disassembler-four-args: [ on ]
CC /tmp/build/perf/jvmti/libjvmti.o
CC /tmp/build/perf/builtin-bench.o
<SNIP>
$
$
The feature detection test-all.bin gets successfully built and linked:
$ ls -la /tmp/build/perf/feature/test-all.bin
-rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin
$ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler
0000000000061f90 T disassembler
$
Time to move on to the patches that make use of this disassembler()
routine in binutils's libopcodes.
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
[ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds processing of PERF_BPF_EVENT_PROG_LOAD, which sets
proper DSO type/id/etc of memory regions mapped to BPF programs to
DSO_BINARY_TYPE__BPF_PROG_INFO.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-14-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new dso type DSO_BINARY_TYPE__BPF_PROG_INFO for BPF programs. In
symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso will call into a new
function symbol__disassemble_bpf() in an upcoming patch, where annotation line
information is filled based bpf_prog_info and btf saved in given perf_env.
Committer notes:
Removed the unnamed union with 'bpf_prog' and 'cache' in 'struct dso',
to fix this bug when exiting 'perf top':
# perf top
perf: Segmentation fault
-------- backtrace --------
perf[0x5a785a]
/lib64/libc.so.6(+0x385bf)[0x7fd68443c5bf]
perf(rb_first+0x2b)[0x4d6eeb]
perf(dso__delete+0xb7)[0x4dffb7]
perf[0x4f9e37]
perf(perf_session__delete+0x64)[0x504df4]
perf(cmd_top+0x1957)[0x454467]
perf[0x4aad18]
perf(main+0x61c)[0x42ec7c]
/lib64/libc.so.6(__libc_start_main+0xf2)[0x7fd684428412]
perf(_start+0x2d)[0x42eead]
#
# addr2line -fe ~/bin/perf 0x4dffb7
dso_cache__free
/home/acme/git/perf/tools/perf/util/dso.c:713
That is trying to access the dso->data.cache, and that is not used with
BPF programs, so we end up accessing what is in bpf_prog.first_member,
b00m.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both libbfd and libopcodes are distributed with binutil-dev/devel. When
libbfd is present, it is OK to assume that libopcodes also present. This
has been a safe assumption for bpftool.
This patch adds -lopcodes to perf/Makefile.config. libopcodes will be
used in the next commit for BPF annotation.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-12-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch enables 'perf record' to save BTF information as headers to
perf.data.
A new header type HEADER_BPF_BTF is introduced for this data.
Committer testing:
As root, being on the kernel sources top level directory, run:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg
Just to compile and load a BPF program that attaches to the
raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending
in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc).
Make sure you have a recent enough clang, say version 9, to get the
BTF ELF sections needed for this testing:
# clang --version | head -1
clang version 9.0.0 (https://git.llvm.org/git/clang.git/ 7906282d3afec5dfdc2b27943fd6c0309086c507) (https://git.llvm.org/git/llvm.git/ a1b5de1ff8ae8bc79dc8e86e1f82565229bd0500)
# readelf -SW tools/perf/examples/bpf/augmented_raw_syscalls.o | grep BTF
[22] .BTF PROGBITS 0000000000000000 000ede 000b0e 00 0 0 1
[23] .BTF.ext PROGBITS 0000000000000000 0019ec 0002a0 00 0 0 1
[24] .rel.BTF.ext REL 0000000000000000 002fa8 000270 10 30 23 8
Then do a systemwide perf record session for a few seconds:
# perf record -a sleep 2s
Then look at:
# perf report --header-only | grep b[pt]f
# event : name = cycles:ppp, , id = { 1116204, 1116205, 1116206, 1116207, 1116208, 1116209, 1116210, 1116211 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1
# bpf_prog_info of id 13
# bpf_prog_info of id 14
# bpf_prog_info of id 15
# bpf_prog_info of id 16
# bpf_prog_info of id 17
# bpf_prog_info of id 18
# bpf_prog_info of id 21
# bpf_prog_info of id 22
# bpf_prog_info of id 51
# bpf_prog_info of id 52
# btf info of id 8
#
We need to show more info about these BPF and BTF entries , but that can
be done later.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-10-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
BTF contains information necessary to annotate BPF programs. This patch
saves BTF for BPF programs loaded in the system.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-9-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch enables perf-record to save bpf_prog_info information as
headers to perf.data. A new header type HEADER_BPF_PROG_INFO is
introduced for this data.
Committer testing:
As root, being on the kernel sources top level directory, run:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg
Just to compile and load a BPF program that attaches to the
raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending
in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc).
Then do a systemwide perf record session for a few seconds:
# perf record -a sleep 2s
Then look at:
# perf report --header-only | grep -i bpf
# bpf_prog_info of id 13
# bpf_prog_info of id 14
# bpf_prog_info of id 15
# bpf_prog_info of id 16
# bpf_prog_info of id 17
# bpf_prog_info of id 18
# bpf_prog_info of id 21
# bpf_prog_info of id 22
# bpf_prog_info of id 208
# bpf_prog_info of id 209
#
We need to show more info about these programs, like bpftool does for
the ones running on the system, i.e. 'perf record/perf report' become a
way of saving the BPF state in a machine to then analyse on another,
together with all the other information that is already saved in the
perf.data header:
# perf report --header-only
# ========
# captured on : Tue Mar 12 11:42:13 2019
# header version : 1
# data offset : 296
# data size : 16294184
# feat offset : 16294480
# hostname : quaco
# os release : 5.0.0+
# perf version : 5.0.gd783c8
# arch : x86_64
# nrcpus online : 8
# nrcpus avail : 8
# cpudesc : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
# cpuid : GenuineIntel,6,142,10
# total memory : 24555720 kB
# cmdline : /home/acme/bin/perf (deleted) record -a
# event : name = cycles:ppp, , id = { 3190123, 3190124, 3190125, 3190126, 3190127, 3190128, 3190129, 3190130 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1
# CPU_TOPOLOGY info available, use -I to display
# NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: intel_pt = 8, software = 1, power = 11, uprobe = 7, uncore_imc = 12, cpu = 4, cstate_core = 18, uncore_cbox_2 = 15, breakpoint = 5, uncore_cbox_0 = 13, tracepoint = 2, cstate_pkg = 19, uncore_arb = 17, kprobe = 6, i915 = 10, msr = 9, uncore_cbox_3 = 16, uncore_cbox_1 = 14
# CACHE info available, use -I to display
# time of first sample : 116392.441701
# time of last sample : 116400.932584
# sample duration : 8490.883 ms
# MEM_TOPOLOGY info available, use -I to display
# bpf_prog_info of id 13
# bpf_prog_info of id 14
# bpf_prog_info of id 15
# bpf_prog_info of id 16
# bpf_prog_info of id 17
# bpf_prog_info of id 18
# bpf_prog_info of id 21
# bpf_prog_info of id 22
# bpf_prog_info of id 208
# bpf_prog_info of id 209
# missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT
# ========
#
Committer notes:
We can't use the libbpf unconditionally, as the build may have been with
NO_LIBBPF, when we end up with linking errors, so provide dummy
{process,write}_bpf_prog_info() wrapped by HAVE_LIBBPF_SUPPORT for that
case.
Printing are not affected by this, so can continue as is.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-8-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_prog_info contains information necessary to annotate bpf programs.
This patch saves bpf_prog_info for bpf programs loaded in the system.
Some big picture of the next few patches:
To fully annotate BPF programs with source code mapping, 4 different
informations are needed:
1) PERF_RECORD_KSYMBOL
2) PERF_RECORD_BPF_EVENT
3) bpf_prog_info
4) btf
Before this set, 1) and 2) in the list are already saved to perf.data
file. For BPF programs that are already loaded before perf run, 1) and 2)
are synthesized by perf_event__synthesize_bpf_events(). For short living
BPF programs, 1) and 2) are generated by kernel.
This set handles 3) and 4) from the list. Again, it is necessary to handle
existing BPF program and short living program separately.
This patch handles 3) for exising BPF programs while synthesizing 1) and
2) in perf_event__synthesize_bpf_events(). These data are stored in
perf_env. The next patch saves these data from perf_env to perf.data as
headers.
Similarly, the two patches after the next saves 4) of existing BPF
programs to perf_env and perf.data.
Another patch later will handle 3) and 4) for short living BPF programs
by monitoring 1) and 2) in a dedicate thread.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com
[ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch changes the arguments of perf_event__synthesize_bpf_events()
to include perf_session* instead of perf_tool*. perf_session will be
used in the next patch.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-6-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With bpf_program__get_prog_info_linear, we can simplify the logic that
synthesizes bpf events.
This patch doesn't change the behavior of the code.
Commiter notes:
Needed this (for all four variables), suggested by Song, to overcome
build failure on debian experimental cross building to MIPS 32-bit:
- u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags);
+ u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(uintptr_t)(info->prog_tags);
util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog':
util/bpf-event.c:143:35: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags);
^
util/bpf-event.c:144:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
__u32 *prog_lens = (__u32 *)(info->jited_func_lens);
^
util/bpf-event.c:145:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
__u64 *prog_addrs = (__u64 *)(info->jited_ksyms);
^
util/bpf-event.c:146:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
void *func_infos = (void *)(info->func_info);
^
cc1: all warnings being treated as errors
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-5-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, bpf_prog_info includes 9 arrays. The user has the option to
fetch any combination of these arrays. However, this requires a lot of
handling.
This work becomes more tricky when we need to store bpf_prog_info to a
file, because these arrays are allocated independently.
This patch introduces 'struct bpf_prog_info_linear', which stores arrays
of bpf_prog_info in continuous memory.
Helper functions are introduced to unify the work to get different sets
of bpf_prog_info. Specifically, bpf_program__get_prog_info_linear()
allows the user to select which arrays to fetch, and handles details for
the user.
Please see the comments right before 'enum bpf_prog_info_array' for more
details and examples.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lkml.kernel.org/r/ce92c091-e80d-a0c1-4aa0-987706c42b20@iogearbox.net
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-3-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, monitoring of BPF programs through bpf_event is off by
default for 'perf record'.
To turn it on, the user need to use option "--bpf-event". As BPF gets
wider adoption in different subsystems, this option becomes
inconvenient.
This patch makes bpf_event on by default, and adds option "--no-bpf-event"
to turn it off. Since option --bpf-event is not released yet, it is safe
to remove it.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-2-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
=================================================================
==20875==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 1160 byte(s) in 1 object(s) allocated from:
#0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x55bd50005599 in zalloc util/util.h:23
#2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327
#3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216
#4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69
#5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358
#6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388
#7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583
#8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722
#9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520
#13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
Indirect leak of 19 byte(s) in 1 object(s) allocated from:
#0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
#1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f)
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 6a6cd11d4e ("perf test: Add test for the sched tracepoint format fields")
Link: http://lkml.kernel.org/r/20190316080556.3075-17-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using gcc's ASan, Changbin reports:
=================================================================
==7494==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x5625e5330a5e in zalloc util/util.h:23
#2 0x5625e5330a9b in perf_counts__new util/counts.c:10
#3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
#4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
#5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
#6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
#7 0x5625e51528e6 in run_test tests/builtin-test.c:358
#8 0x5625e5152baf in test_and_print tests/builtin-test.c:388
#9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
#10 0x5625e515572f in cmd_test tests/builtin-test.c:722
#11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
#15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
Indirect leak of 72 byte(s) in 1 object(s) allocated from:
#0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x5625e532560d in zalloc util/util.h:23
#2 0x5625e532566b in xyarray__new util/xyarray.c:10
#3 0x5625e5330aba in perf_counts__new util/counts.c:15
#4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
#5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
#6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
#7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
#8 0x5625e51528e6 in run_test tests/builtin-test.c:358
#9 0x5625e5152baf in test_and_print tests/builtin-test.c:388
#10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
#11 0x5625e515572f in cmd_test tests/builtin-test.c:722
#12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
#16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
His patch took care of evsel->prev_raw_counts, but the above backtraces
are about evsel->counts, so fix that instead.
Reported-by: Changbin Du <changbin.du@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/n/tip-hd1x13g59f0nuhe4anxhsmfp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Martin Schwidefsky