The drm_mm debugfs output is difficult to read as two different formats
are used for the addresses:
0x00000080000000-0x0000008000b000: 45056: used
0x8000b000-0x80016000: 45056: free
0x00000080016000-0x0000008001b000: 20480: used
0x8001b000-0x817a1000: 24666112: free
0x000000817a1000-0x000000817a8000: 28672: used
0x000000817a8000-0x00000081ba8000: 4194304: used
Fix this by using %#018llx for all addresses, thus making the output:
0x0000000080000000-0x000000008000b000: 45056: used
0x000000008000b000-0x0000000080016000: 45056: free
0x0000000080016000-0x000000008001b000: 20480: used
0x000000008001b000-0x00000000817a1000: 24666112: free
0x00000000817a1000-0x00000000817a8000: 28672: used
0x00000000817a8000-0x0000000081ba8000: 4194304: used
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- cpt modeset sequence fixes from Ville
- more rps boosting tuning from Chris
- S3 support for skl (Damien)
- a pile of w/a for bxt from various people
- cleanup of primary plane pixel formats (Damien)
- a big pile of small patches with fixes and cleanups all over
* tag 'drm-intel-next-2015-05-22' of git://anongit.freedesktop.org/drm-intel: (90 commits)
drm/i915: Update DRIVER_DATE to 20150522
drm/i915: Introduce DRM_I915_THROTTLE_JIFFIES
drm/i915: Use the correct destructor for freeing requests on error
drm/i915/skl: don't fail colorkey + scaler request
drm/i915: Enable GTT caching on gen8
drm/i915: Move WaProgramL3SqcReg1Default:bdw to init_clock_gating()
drm/i915: Use ilk_init_lp_watermarks() on BDW
drm/i915: Disable FDI RX/TX before the ports
drm/i915: Disable CRT port after pipe on PCH platforms
drm/i915: Disable SDVO port after the pipe on PCH platforms
drm/i915: Disable HDMI port after the pipe on PCH platforms
drm/i915: Fix the IBX transcoder B workarounds
drm/i915: Write the SDVO reg twice on IBX
drm/i915: Fix DP enhanced framing for CPT
drm/i915: Clean up the CPT DP .get_hw_state() port readout
drm/i915: Clarfify the DP code platform checks
drm/i915: Remove the double register write from intel_disable_hdmi()
drm/i915: Remove a bogus 12bpc "toggle" from intel_disable_hdmi()
drm/i915/skl: Deinit/init the display at suspend/resume
drm/i915: Free RPS boosts for all laggards
...
The value was much too low, which could cause the userspace visible
vblank counter to move backwards when the hardware counter wrapped
around.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is theoretically possible that a swapped out BO gets the
same GTT address, but different backing pages while being swapped in.
Instead just use another VA state to note updated areas.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we are messing with state in the worker.
v2: drop the changes in the mst worker
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Use the generic mechanism to declare a bitmap instead of unsigned long.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the vce clocks are automatic, others need to
be manually enabled. For ease, just disable cg when
vce is active.
v2: rebased, call vce_v1_0_enable_mgcg directly
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initial support for VCE 1.0 using newest firmware.
v2: rebased
v3: fix for TN
v4: fix FW size calculation
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For setting clocks with VCE v1.0
v2: (chk) rebased on current tree
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They seem to work fine with the kernel interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously we were completely over allocating, fix this
by actually implementing the size calculation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Userspace will be able to tell whether a GPU reset occured by comparing
an old referece value of the counter with a new value.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we have more than one CRTCs in a group pre-associate planes 0-3 with
CRTC 0 and planes 4-7 with CRTC 1 to minimize flicker occurring when the
association is changed. The pre-association could be controlled by a
module parameter if needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The number of CRTCs in a group is only used to implement plane
initialization for now, but is also needed to implement pre-association
of planes to CRTCs. Store it in the group structure instead of computing
it on demand.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Hardware planes are driven by the timing generator of the CRTC they are
associated to. Changing the association requires restarting the CRTC
group that the plane belongs to, resulting in flicker on the other CRTC.
To avoid flicker as much as possible, try to allocate planes first from
the free planes already associated with the target CRTC. If allocation
fails then fall back to allocation from all free planes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Changing the plane to CRTC associations requires restarting the CRTC
group, creating visible flicker. Mitigate the issue by changing plane
association only when a plane becomes enabled, not when it get disabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Plane allocation is a complex process, add debugging statements to help
finding out what could might wrong.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
All other cast functions are named without using "du", make the plane
state cast consistent with them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar_du_planes structure contains a single field and is only
instantiated in the rcar_du_group structure. Embed it directly and
remove the rcar_du_planes structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The plane property objects are instantiated once per CRTC group, while
they should be instantiated once globally for the device. Fix this and
move them to the rcar_du_device structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The ADV7511 is probed before its slave encoder init function associates
it with an encoder. This creates a time window during which hot plug
detection interrupts can occur with an encoder, resulting in a crash in
the IRQ handler.
Fix this by ignoring hot plug detection IRQs when no encoder is
associated yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
As Daniel commented on
commit b7ffe1362c5f468b853223acc9268804aa92afc8
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Apr 27 13:41:24 2015 +0100
drm/i915: Free RPS boosts for all laggards
it is better to be explicit when sharing hardcoded values such as
throttle/boost timeouts. Make it so!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After allocating from the slab cache, we then need to free the request
back into the slab cache upon error (and not call kfree as that leads
to eventual memory corruption).
Fixes regression from
commit efab6d8dd1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:57 2015 +0100
drm/i915: Use a separate slab for requests
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is a mplayer video failure reported with xv.
This is because there is a request to do both plane scaling
and colorkey. Because skl hw doesn't support plane scaling
and colorkey at the same time, request is failed which is expected
behavior.
To make xv operate, this patch allows colorkey continue to work
without using scaler. Then behavior would be similar to platforms
without plane scaler support.
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90449
[danvet: change can_scale to bool as requested by Ville.]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GTT caching was disabled by default on gen8 due to not working with
big pages. Some information suggests that it got fixed, but still
GTT caching has been left disabled by default. Or could be it just
meant that the default was changed to off, and hence the problem
got solved.
Enable GTT caching in the hopes of some performance increase.
Whether or not the big pages issue has been fixed is irrelevant
at this stage since we don't use big pages.
This gives me a 1-2% improvement in xonotic on my BSW. Haven't tried
BDW, but supposedly it has larger TLBs so might not benefit as much.
On HSW GTT caching is enabled by default.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GEN8_L3SQCREG1 isn't saved in the context (verified by going through
a context dump), and so we shouldn't be using the ring w/a code to
initialize it. Also Bspec explicitly talks about MMIO and writing it
with the CPU.
Additionally there's another w/a WaTempDisableDOPClkGating:bdw which
tells us to disable DOP clock gating around the GEN8_L3SQCREG1 write
to make sure everyone notices the change. So let's do that as well.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We're not using ilk_init_lp_watermarks() on BDW for some reason.
Probably due to the BDW patches and the relevant WM patches landing
roughlly at the same time. Fix it up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bspec says we should disable the FDI RX/TX before disabling the PCH
ports. Do so.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Follow the BSpec sequence for the CRT port as well on PCH platforms,
ie. disable the pipe before the port.
Didn't bother looking at DDI in detail yet, so leave that one be even
though the CRT is a PCH port there.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
While at it also remove the redundant/unneeded w/a like done for hdmi
already.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Mention that this also removes the unneeded w/a, as suggested
by Jesse.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
BSpec says we should disable all ports after the pipe on PCH
platforms. Do so. Fixes a pipe off timeout on ILK now caused by
the transcoder B workaround.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently the IBX transcoder B workarounds are not working correctly.
Well, the HDMI one seems to be working somewhat, but the DP one is
definitely busted.
After a bit of experimentation it looks like the best way to make this
work is first disable the port on transcoder B, and then re-enable it
transcoder A, and immediately disable it again.
We can also clean up the code by noting that we can't be called without
a valid crtc. And also note that port A on ILK does not need the
workaround, so let's check for that one too.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On IBX the SDVO/HDMI register write may be masked when enabling the
port, so it may need to written twice. The HDMI code does this, but
the SDVO code does not. Add the workaround to the SDVO code as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we're always enabling enhanced framing on CPT even if the sink
doesn't support it. Fix this up by actaully looking at what the sink
tells us.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Define a TRANS_DP_PIPE_TO_PORT() to make the CPT DP .get_hw_state()
pipe readout neater.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
intel_dp.c is a mess with all the checks for different
platform/PCH variants and ports. Try to clean it up by recognizing
the following facts:
- IVB port A, and CPT port B/C/D are always the special cases
- VLV/CHV don't have port A
- Using the same kind of logic everywhere makes things much easier to
parse
So let's move the IVB port A and PCH port B/C/D checks to be done first,
and let the other cases fall through, and always check for these things
using the same logic.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
IBX can have problems with the first write to the port register getting
masked when enabling the port. We are trying to apply the workaround
also when disabling the port where it's not needed, and we also try
to apply it for CPT/PPT as well which don't need it. Just kill it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Resolve conflict with the remove CHV if block.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The IBX 12bpc port enable toggle is only relevant when enabling
the port, not when disabling it. Also this code doesn't actually
toggle anything, and essentially just writes the port register
one extra time. Furthermore CPT/PPT don't need such workarounds
and yet we include them. Just kill it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie