A client user instantiates and attaches to an iommu_domain to
program the OMAP IOMMU associated with the domain. The iommus
programmed by a client user are bound with the iommu_domain
through the user's device archdata. The OMAP IOMMU driver
currently supports only one IOMMU per IOMMU domain per user.
The OMAP IOMMU driver has been enhanced to support allowing
multiple IOMMUs to be programmed by a single client user. This
support is being added mainly to handle the DSP subsystems on
the DRA7xx SoCs, which have two MMUs within the same subsystem.
These MMUs provide translations for a processor core port and
an internal EDMA port. This support allows both the MMUs to
be programmed together, but with each one retaining it's own
internal state objects. The internal EDMA block is managed by
the software running on the DSPs, and this design provides
on-par functionality with previous generation OMAP DSPs where
the EDMA and the DSP core shared the same MMU.
The multiple iommus are expected to be provided through a
sentinel terminated array of omap_iommu_arch_data objects
through the client user's device archdata. The OMAP driver
core is enhanced to loop through the array of attached
iommus and program them for all common operations. The
sentinel-terminated logic is used so as to not change the
omap_iommu_arch_data structure.
NOTE:
1. The IOMMU group and IOMMU core registration is done only for
the DSP processor core MMU even though both MMUs are represented
by their own platform device and are probed individually. The
IOMMU device linking uses this registered MMU device. The struct
iommu_device for the second MMU is not used even though memory
for it is allocated.
2. The OMAP IOMMU debugfs code still continues to operate on
individual IOMMU objects.
Signed-off-by: Suman Anna <s-anna@ti.com>
[t-kristo@ti.com: ported support to 4.13 based kernel]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The OMAP IOMMU driver allows only a single device (eg: a rproc
device) to be attached per domain. The current attach detection
logic relies on a check for an attached iommu for the respective
client device. Change this logic to use the client device pointer
instead in preparation for supporting multiple iommu devices to be
bound to a single iommu domain, and thereby to a client device.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The OMAP IOMMU driver was using ARM assembly code directly for
flushing the MMU page table entries from the caches. This caused
MMU faults on OMAP4 (Cortex-A9 based SoCs) as L2 caches were not
handled due to the presence of a PL310 L2 Cache Controller. These
faults were however not seen on OMAP5/DRA7 SoCs (Cortex-A15 based
SoCs).
The OMAP IOMMU driver is adapted to use the DMA Streaming API
instead now to flush the page table/directory table entries from
the CPU caches. This ensures that the devices always see the
updated page table entries. The outer caches are now addressed
automatically with the usage of the DMA API.
Signed-off-by: Josue Albarran <j-albarran@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU framework lets its client users be notified on a
MMU fault and allows them to either handle the interrupt by
dynamic reloading of an appropriate TLB/PTE for the offending
fault address or to completely restart/recovery the device
and its IOMMU.
The OMAP remoteproc driver performs the latter option, and
does so after unwinding the previous mappings. The OMAP IOMMU
fault handler however disables the MMU and cuts off the clock
upon a MMU fault at present, resulting in an interconnect abort
during any subsequent operation that touches the MMU registers.
So, disable the IP-level fault interrupts instead of disabling
the MMU, to allow continued MMU register operations as well as
to avoid getting interrupted again.
Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
[s-anna@ti.com: add commit description]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Josue Albarran <j-albarran@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Support for IOMMU groups will become mandatory for drivers,
so add it to the omap iommu driver.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[s-anna@ti.com: minor error cleanups]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Modify the driver to register individual iommus and
establish links between devices and iommus in sysfs.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[s-anna@ti.com: fix some cleanup issues during failures]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead of finding the matching IOMMU for a device using
string comparision functions, store the pointer to the
iommu_dev in arch_data during the omap_iommu_add_device
callback and reset it during the omap_iommu_remove_device
callback functions.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[s-anna@ti.com: few minor cleanups]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The internal data-structures are scattered over various
header and C files. Consolidate them in omap-iommu.h.
While at this, add the kerneldoc comment for the missing
iommu domain variable and revise the iommu_arch_data name.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[s-anna@ti.com: revise kerneldoc comments]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All the supported boards that have OMAP IOMMU devices do support
DT boot only now. So, drop the support for the non-DT legacy-style
devices from the OMAP IOMMU driver. Couple of the fields from the
iommu platform data would no longer be required, so they have also
been cleaned up. The IOMMU platform data is still needed though for
performing reset management properly in a multi-arch environment.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the registration of the OMAP IOMMU platform driver before
setting the IOMMU callbacks on the platform bus. This causes
the IOMMU devices to be probed first before the .add_device()
callback is invoked for all registered devices, and allows
the iommu_group support to be added to the OMAP IOMMU driver.
While at this, also check for the return status from bus_set_iommu.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The OMAP IOMMU page table needs to be aligned on a 16K boundary,
and the current code uses a BUG_ON on the alignment sanity check
in the .domain_alloc() ops implementation. Replace this with a
less severe WARN_ON and bail out gracefully.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iopgtable_store_entry_core() function uses a BUG() statement
for an unsupported page size entry programming. Replace this with
a less severe WARN_ON() and perform a graceful bailout on error.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function iopgtable_clear_entry_all() is used for clearing all
the page table entries. These entries are neither created nor
initialized during the OMAP IOMMU driver probe, and are managed
only when a client device attaches to the IOMMU. So, there is no
need to invoke this function on a driver remove.
Removing this fixes a NULL pointer dereference crash if the IOMMU
device is unbound from the driver with no client device attached
to the IOMMU device.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The DSP MMUs on DRA7xx SoC requires configuring an additional
MMU_CONFIG register present in the DSP_SYSTEM sub module. This
setting dictates whether the DSP Core's MDMA and EDMA traffic
is routed through the respective MMU or not. Add the support
to the OMAP iommu driver so that the traffic is not bypassed
when enabling the MMUs.
The MMU_CONFIG register has two different bits for enabling
each of these two MMUs present in the DSP processor sub-system
on DRA7xx. An id field is added to the OMAP iommu object to
identify and enable each IOMMU. The id information and the
DSP_SYSTEM.MMU_CONFIG register programming is achieved through
the processing of the optional "ti,syscon-mmuconfig" property.
A proper value is assigned to the id field only when this
property is present.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix all the occurrences of the following check warning
generated with the checkpatch --strict option:
"CHECK: Alignment should match open parenthesis"
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix couple of checkpatch warnings of the type,
"WARNING: Possible unnecessary 'out of memory' message"
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The main OMAP IOMMU driver file has some helper functions used
by the OMAP IOMMU debugfs functionality, and there is already a
dedicated source file omap-iommu-debug.c dealing with these debugfs
routines. Move all these functions to the omap-iommu-debug.c file,
so that all the debugfs related routines are in one place.
The move required exposing some new functions and moving some
definitions to the internal omap-iommu.h header file.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The OMAP IOMMU driver has been adapted to the IOMMU framework
for a while now, and it does not support being built as a
module anymore. So, remove all the module references from the
OMAP IOMMU driver.
While at it, also relocate a comment around the subsys_initcall
to avoid a checkpatch strict warning about using a blank line
after function/struct/union/enum declarations.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The OMAP IOMMU driver unconditionally executes code and registers a
struct iommu_ops with the platform bus irrespective of whether it runs
on an OMAP SoC or not. This causes problems in multi-platform kernels
where drivers for other SoCs will no longer be able to register their
own struct iommu_ops or even try to use a struct iommu_ops for an IOMMU
that obviously isn't there.
The smallest fix I could think of is to check for the existence of any
OMAP IOMMU devices in the device tree and skip initialization otherwise.
This fixes a problem on Tegra20 where the DRM driver will try to use the
obviously non-existent OMAP IOMMU.
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Suman Anna <s-anna@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fixes this compile warning:
drivers/iommu/omap-iommu.c: In function 'omap_iommu_map':
drivers/iommu/omap-iommu.c:1139:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'phys_addr_t' [-Wformat=]
dev_dbg(dev, "mapping da 0x%lx to pa 0x%x size 0x%x\n", da, pa, bytes);
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Mapping and unmapping are more often than not in the critical path.
map_sg allows IOMMU driver implementations to optimize the process
of mapping buffers into the IOMMU page tables.
Instead of mapping a buffer one page at a time and requiring potentially
expensive TLB operations for each page, this function allows the driver
to map all pages in one go and defer TLB maintenance until after all
pages have been mapped.
Additionally, the mapping operation would be faster in general since
clients does not have to keep calling map API over and over again for
each physically contiguous chunk of memory that needs to be mapped to a
virtually contiguous region.
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The .domain field in omap_iommu struct is set properly when the
OMAP IOMMU device is attached to, but is never reset properly
on detach. Reset this properly so that the OMAP IOMMU debugfs
logic can depend on this field before allowing the debugfs
operations.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The following functions were exported previously for usage by
the OMAP IOMMU debug module:
omap_iommu_dump_ctx()
omap_dump_tlb_entries()
omap_iopgtable_store_entry()
These functions need not be exported anymore as the OMAP IOMMU
debugfs code is integrated with the OMAP IOMMU driver, and
there won't be external users for these functions. So, remove
the EXPORT_SYMBOL_GPL on these. The omap_iopgtable_store_entry()
is also made internal only, after making the 'pagetable' debugfs
entry read-only.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The exported functions omap_foreach_iommu_device() and
omap_iotlb_cr_to_e() have been deleted, as they are no
longer needed.
The function omap_foreach_iommu_device() is not required
after the consolidation of the OMAP IOMMU debug module,
and the function omap_iotlb_cr_to_e() is not required
after making the debugfs entry 'pagetable' read-only.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The debugfs support for OMAP IOMMU is currently implemented
as a module, warranting certain OMAP-specific IOMMU API to
be exported. The OMAP IOMMU, when enabled, can only be built-in
into the kernel, so integrate the OMAP IOMMU debug module
into the OMAP IOMMU driver. This helps in eliminating the
need to export most of the current OMAP IOMMU API.
The following are the main changes:
- The debugfs directory and entry creation logic is reversed,
the calls are invoked by the OMAP IOMMU driver now.
- The current iffy circular logic of adding IOMMU archdata
to the IOMMU devices itself to get a pointer to the omap_iommu
object in the debugfs support code is replaced by directly
using the omap_iommu structure while creating the debugfs
entries.
- The debugfs root directory is renamed from the generic name
"iommu" to a specific name "omap_iommu".
- Unneeded headers have also been cleaned up while at this.
- There will no longer be a omap-iommu-debug.ko module after
this patch.
- The OMAP_IOMMU_DEBUG Kconfig option is converted to boolean
only, the OMAP IOMMU debugfs support is built alongside the
OMAP IOMMU driver only when this option is enabled.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The OMAP IOMMU driver was originally designed as modules, and split
into a core module and a thin arch-specific module through the OMAP
arch-specific struct iommu_functions, to scale for both OMAP1 and
OMAP2+ IOMMU variants. The driver can only be built for OMAP2+
platforms currently, and also can only be built-in after the
adaptation to generic IOMMU API. The OMAP1 variant was never added
and will most probably be never added (the code for the only potential
user, its parent, DSP processor has already been cleaned up). So,
consolidate the OMAP2 specific omap-iommu2 module into the core OMAP
IOMMU driver - this eliminates the arch-specific ops structure and
simplifies the driver into a single module that only implements the
generic IOMMU API's iommu_ops.
The following are the main changes:
- omap-iommu2 module is completely eliminated, with the common
definitions moved to the internal omap-iommu.h, and the ops
implementations moved into omap-iommu.c
- OMAP arch-specific struct iommu_functions is also eliminated,
with the ops implementations directly absorbed into the calling
functions
- iotlb_alloc_cr() is no longer inlined and defined only when
PREFETCH_IOTLB is defined
- iotlb_dump_cr() is similarly defined only when CONFIG_OMAP_IOMMU_DEBUG
is defined
- Elimination of the OMAP IOMMU exported functions to register the
arch ops, omap_install_iommu_arch() & omap_uninstall_iommu_arch()
- Any stale comments about OMAP1 are also cleaned up
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function omap_iommu_arch_version() is not used anymore,
and is not required either, so remove it. The .version field
in struct iommu_functions that this function uses is also
removed, as it is not really an ops to retrieve a version and
there won't be any usage for this field either.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The refcount field in omap_iommu object is primarily used to check
if an IOMMU device has already been enabled, but this is already
implicit in the omap_iommu_attach_dev() which ensures that only
a single device can attach to an IOMMU. This field is redundant,
and so has been cleaned up.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The owner field is never set. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A device is tied to an iommu through its archdata field. The archdata
is allocated on the fly for DT-based devices automatically through the
.add_device iommu ops. The current logic incorrectly assigned the name
of the IOMMU user device, instead of the name of the IOMMU device as
required by the attach logic. Fix this issue so that DT-based devices
can attach successfully to an IOMMU domain.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Any device requiring to be attached to an iommu_domain must have
valid archdata containing the necessary iommu information, which
is SoC-specific. Add a check in the omap_iommu_attach_dev to make
sure that the device has valid archdata before accessing
different SoC-specific fields of the archdata. This prevents a
NULL pointer dereference on any misconfigured devices.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The OMAP3 ISP driver was the only user of the OMAP IOVMM API. Now that
is has been ported to the DMA API, remove the unused virtual memory
manager.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This structure is read-only data and should never be modified.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The prot flags passed to the IOMMU map handler are defined in
include/linux/iommu.h as IOMMU_(READ|WRITE|CACHE|EXEC). However, the
driver expects to receive MMU_RAM_* OMAP-specific flags. This causes
IOMMU flags being interpreted as page sizes, leading to failures.
Hardcode the OMAP mapping parameters to little-endian, 8-bits and
non-mixed page attributes. Furthermore, as the OMAP IOMMU doesn't
support read-only or write-only mappings, ignore the prot value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Suman Anna <s-anna@ti.com>
The IOMMU core breaks out mappings into pages already, there's no
need to support mapping multiple pages in one go.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi>
The flush_iotlb_page() function prints a debug message when no
corresponding page was found in the TLB. That condition is incorrectly
checked and always resolves to true, given that the for_each_iotlb_cr()
loop is never interrupted and always reaches obj->nr_tlb_entries.
Given that we can't have two TLB entries for the same VA, break from the
loop when a match is found.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Suman Anna <s-anna@ti.com>
The to_iommu definition is used only locally to the omap-iommu.c
source file, and it has nothing to do with the page attributes
defined in omap-iopgtable.h. So, move the definition out of
omap-iopgtable.h header file.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The current OMAP IOMMU ops for .domain_has_cap is a stub,
and the iommu core already returns a value of 0 if the
domain doesn't have a .domain_has_cap ops plugged in. So,
clean up this stub function.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The iotlb_entry field values are used directly in omap2_alloc_cr,
a function used in preparing the MMU_CAM and MMU_RAM registers.
The iotlb_entry.valid value is being set incorrectly to 1 at the
moment, and this would result in overriding the PAGESIZE bit field
of the MMU_CAM register if prefetching of the entries were to be
supported.
The bug has not caused any MMU faults due to incorrect size
programming so far as the prefetching is disabled by default. Fix
this by using the correct init value for the iotlb_entry.valid
field.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The iopte_free() function should check for NULL because
kmem_cache_free() will panic on NULL argument.
Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The OMAP IOMMU driver locates the IOMMU associated to a device using the
IOMMU name stored in the device archdata iommu field. That field is
expected to be populated by platform code and is left unset for DT-based
devices. This results in a crash when the IOMMU driver attaches a domain
to a device.
Fix this by allocating the archdata iommu structure when devices are
added and freeing when they are removed. Devices without an OF node, and
devices without an iommus property in their OF node are ignored. The
iommu name is initialized from the IOMMU device node name.
This should be simplified when removing non-DT support completely from
the IOMMU users as the IOMMU name won't be needed anymore, and the
IOMMU device pointer could then be stored in the archdata iommu field
directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[s-anna@ti.com: updated to use device name instead of OF name]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The remoteproc MMUs in OMAP4+ SoCs have some additional debug
registers that can give out the PC value in addition to the
MMU fault address. The PC value can be extracted properly only
on the DSP cores, and is not available on the ARM processors
within the IPU sub-systems. Instead, the MMUs have been enhanced
to throw a bus-error response back to the IPU processors.
This functionality is programmable through the MMU_GP_REG register.
The cores are simply stalled if the MMU_GP_REG.BUS_ERR_BACK_EN bit
is not set. When set, a bus-error exception is raised allowing the
processor to handle it as a bus fault and provide additional debug
information. This feature is turned on by default by the driver on
iommus supporting it.
Signed-off-by: Subramaniam Chanderashekarapuram <subramaniam.ca@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
As OMAP2+ is moving to a full DT boot for all SoC families, commit
7ce93f3 "ARM: OMAP2+: Fix more missing data for omap3.dtsi file"
adds basic DT bits for OMAP3. But the driver is not yet converted,
so this will not work and driver will not be probed. Convert it!
The legacy boot mode is still supported until OMAP3 is converted
to DT-boot only.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
[s-anna@ti.com: dev_name adaptation and improved error checking]
Signed-off-by: Suman Anna <s-anna@ti.com>
[tony@atomide.com: Ack for arch/arm/*omap* parts]
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Suman Anna