Move the strip ("Starmode Radio IP") driver to drivers/staging. For
several years this driver has only seen API "bombing-run" changes, and
few people ever had the hardware. This driver represents unnecessary
ongoing maintenance for no clear benefit.
This patch brought to you by the "hacking" session at the 2009 Kernel
Summit in Tokyo, Japan...
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch prepares replacing the staging driver cpc-usb with the new
developed ems_usb CAN driver.
Signed-off-by: Sebastian Haas <haas@ems-wuensche.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unfortunatly, the upstream company has abandonded development of this
driver. So it's best to just remove the driver from the tree.
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Intel has officially abandoned this project and does not want to
maintian it or have it included in the main kernel tree, as no one
should use the code, it's not needed anymore.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is already an in-kernel driver for this hardware (since 2.6.30),
at76c50x-usb, and it supports all of the same devices. So this driver
can now be deleted.
Acked-by: Kalle Valo <kalle.valo@iki.fi>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No one cares, it's a custom userspace interface, and the code hasn't
built in a long time. So remove it.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The comedi drivers should be used instead, no need to have
these in here as well.
Cc: David Kiliani <mail@davidkiliani.de>
Cc: Meilhaus Support <support@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The comedi drivers should be used instead, no need to have
this driver in the tree duplicating that one.
Cc: Wolfgang Beiter <w.beiter@aon.at>
Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the code can build, let's add it to the build system.
Cc: "H.J. Thomassen" <hjt@ATComputing.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This wireless driver should work for the Realtek 8192 PCI devices.
It comes directly from Realtek and has been tested to work on at least
one laptop in the wild.
Cc: Anthony Wong <awong1@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Upstream revision 3 of the security processor kernel driver;
now located in drivers/staging
This revision adds an initial TODO file
This driver no longer requires to have the firmware compiled in
it with the CONFIG_EXTRA_FIRMWARE configuration option.
Furthermore, we now have the right to distribute the firmware
binaries.
This is the Linux kernel driver for the Security Processor, which is
a hardware device the provides cryptographic, secure storage, and
key management services.
Please be aware that this patch does not contain any encryption
algorithm. It only transports data to and from user space
applications to the security processor.
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that a "real" driver is in the libata tree for this hardware, we need
to remove the staging driver as it is no longer needed.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is no longer maintained upstream, and no one cares about it at all,
so delete it.
The fact that it is duplicating an existing network driver also is a
good reason to remove it, it's causing nothing but trouble right now.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Turns out the m68k arch already has a CONFIG_VME, so use
CONFIG_VME_BUS instead.
Thanks to Geet Uytterhoeven for pointing this out.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This framework aims to colelese, extend and improve the VME Linux
drivers found at vmelinux.org, universe2.sourceforge.net and
openfmi.net/frs/?group_id=144. The last 2 drivers appear to be forks of
the original code found at vmelinux.org though have extended the
codebase.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Separate Kconfig/Makefile glue from dream into subdirectory. I plan to
add few more drivers, and changing staging/Makefile each time sounds
like inviting conflicts.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The patch is of the "works as far as it goes" variety, in that the
module compiles and loads, the device nodes are registered and the unit
switched on, but nothing actually works. On the other hand, it doesn't
panic the kernel, as far as I know.
Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the vendor driver for the Ralink RT3090 chipset.
It should be later cleaned and ported to use the existing rt2x00
infrastructure or just replaced by the proper version.
[ Unfortunately since it follows the same design/implementation like
rt{286,287,307}0 drivers (already present in the staging tree)
it is highly unlikely that it will see much love from the wireless
development community.. ]
However since the development of the cleaner/proper version can take
significant time lets give distros (i.e. openSUSE seems to already
have the package with the original vendor driver) and users "something"
to use in the meantime.
I forward ported it to 2.6.31-rc1, ported to the Linux build system
and did some initial cleanups. More fixes/cleanups to come later
(it seems that the driver can be made to share most of its code with
the other Ralink drivers already present in the staging tree).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver is not needed, as the existing mos7840 driver works
properly for this device.
Thanks to Russell Lang for doing the work to figure this out.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that Bill rewrote the driver "properly", this old thing can be removed.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver from Realtek for the Realtek RTL8192 USB wifi device
Based on the r8187 driver from Andrea Merello <andreamrl@tiscali.it> and
others.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui
ports present on the Cavium OCTEON family of SOCs. These SOCs are
multi-core mips64 processors with existing support over in arch/mips.
The driver files can be categorized into three basic groups:
1) Register definitions, these are named cvmx-*-defs.h
2) Main driver code, these have names that don't start cvmx-.
3) Interface specific functions and other utility code, names starting
with cvmx-
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add support for all Quatech usb to serial devices.
Based on an original driver from Quatech.
Cleaned up and forward ported by me.
It's a mess, uses it's own tty layer interface, and the coding style is
horrible.
Cc: Tim Gobeli <tgobeli@quatech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the line6 driver to the build system.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the Ralink RT3070 driver from the company that does horrible
things like reading a config file from /etc. However, the driver that
is currently under development from the wireless development community
is not working at all yet, so distros and users are using this version
instead (quite common hardware on a lot of netbook machines).
So here is this driver, for now, until the wireless developers get a
"clean" version into the main tree, or until this version is cleaned up
sufficiently to move out of the staging tree.
Ported to the Linux build system, fixed lots of build issues, forward
ported to the current kernel version, and other minor cleanups were all
done by me.
Cc: Linux wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Intel Management Engine Interface (aka HECI: Host Embedded
Controller Interface ) enables communication between the host OS and
the Management Engine firmware. MEI is bi-directional, and either the
host or Intel AMT firmware can initiate transactions.
The core hardware architecture of Intel Active Management Technology
(Intel AMT) is resident in firmware. The micro-controller within the
chipset's graphics and memory controller (GMCH) hub houses the
Management Engine (ME) firmware, which implements various services
on behalf of management applications.
Some of the ME subsystems that can be access via MEI driver:
- Intel(R) Quiet System Technology (QST) is implemented as a firmware
subsystem that runs in the ME. Programs that wish to expose the
health monitoring and fan speed control capabilities of Intel(R) QST
will need to use the MEI driver to communicate with the ME sub-system.
- ASF is the "Alert Standard Format" which is an DMTF manageability
standard. It is implemented in the PC's hardware and firmware, and is
managed from a remote console.
Most recent Intel desktop chipsets have one or more of the above ME
services. The MEI driver will make it possible to support the above
features on Linux and provides applications access to the ME and it's
features.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Marcin Obara <marcin.obara@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- Basically, update driver to run with 2.6.28
- Conversion from struct class_device to struct device.
- Conversion from .nopfn to .fault in vm_operations_struct.
- Update use of pci_resource_flags to check for IORESOURCE_SIZEALIGN.
- Update use of pci_dma_mapping_error.
- Minor code cleanup and integration with kernel build system.
Signed-off-by: Justin Bronder <jsbronder@brontes3d.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Many thanks to Russell Lang <gsview@ghostgum.com.au> for his
help in getting this working on newer kernel versions and
for pointing out this driver in the first place.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds a new driver called stlc45xx, which supports wi-fi chipsets
stlc4550 and stlc4560 from ST-NXP Wireless. The chipset can be found, for
example, from Nokia N800 and N810 products.
The driver is implemented based on the firmware interface information
published by ST-NXP Wireless here:
http://wireless.kernel.org/en/developers/Documentation/specs#STMicroelectronicshardware
Currently only SPI interface is supported.
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds Kconfig and Makefile entries and exports to
VFS functions to be used by POHMELFS.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The benet driver is now in the proper place in drivers/net/benet, so we
can remove the staging version.
Acked-by: Sathya Perla <sathyap@serverengines.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This prepares us to start adding the android drivers
to the build.
The dummy android.c file will go away in the next few patches, as it
will not be needed once drivers/staging/android/ has a driver in it.
Cc: Robert Love <rlove@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the openPOWERLINK network stack from systec electronic.
It's a bit messed up as there is a driver mixed into the
middle of it, lots of work needs to be done to unwind the
different portions to make it sane.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
John W. Linville