Allow emulation of a zoned device with a per zone capacity smaller than
the zone size as as defined in the Zoned Namespace (ZNS) Command Set
specification. The zone capacity defaults to the zone size if not
specified and must be smaller than the zone size otherwise.
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector. Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does). Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of setting up the queuedata as well just use one private data
field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the call to blk_should_fake_timeout out of blk_mq_complete_request
and into the drivers, skipping call sites that are obvious error
handlers, and remove the now superflous blk_mq_force_complete_rq helper.
This ensures we don't keep injecting errors into completions that just
terminate the Linux request after the hardware has been reset or the
command has been aborted.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=HYf4
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Core block changes that have been queued up for this release:
- Remove dead blk-throttle and blk-wbt code (Guoqing)
- Include pid in blktrace note traces (Jan)
- Don't spew I/O errors on wouldblock termination (me)
- Zone append addition (Johannes, Keith, Damien)
- IO accounting improvements (Konstantin, Christoph)
- blk-mq hardware map update improvements (Ming)
- Scheduler dispatch improvement (Salman)
- Inline block encryption support (Satya)
- Request map fixes and improvements (Weiping)
- blk-iocost tweaks (Tejun)
- Fix for timeout failing with error injection (Keith)
- Queue re-run fixes (Douglas)
- CPU hotplug improvements (Christoph)
- Queue entry/exit improvements (Christoph)
- Move DMA drain handling to the few drivers that use it (Christoph)
- Partition handling cleanups (Christoph)"
* tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits)
block: mark bio_wouldblock_error() bio with BIO_QUIET
blk-wbt: rename __wbt_update_limits to wbt_update_limits
blk-wbt: remove wbt_update_limits
blk-throttle: remove tg_drain_bios
blk-throttle: remove blk_throtl_drain
null_blk: force complete for timeout request
blk-mq: drain I/O when all CPUs in a hctx are offline
blk-mq: add blk_mq_all_tag_iter
blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx
blk-mq: use BLK_MQ_NO_TAG in more places
blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG
blk-mq: move more request initialization to blk_mq_rq_ctx_init
blk-mq: simplify the blk_mq_get_request calling convention
blk-mq: remove the bio argument to ->prepare_request
nvme: force complete cancelled requests
blk-mq: blk-mq: provide forced completion method
block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds
block: blk-crypto-fallback: remove redundant initialization of variable err
block: reduce part_stat_lock() scope
block: use __this_cpu_add() instead of access by smp_processor_id()
...
The commit 7b11eab041 ("blk-mq: blk-mq: provide forced completion
method") exports new API to force a request to complete without error
injection.
There should be no error injection when completing a request by timeout
handler.
Otherwise, the below would hang because timeout handler is failed.
echo 100 > /sys/kernel/debug/fail_io_timeout/probability
echo 1000 > /sys/kernel/debug/fail_io_timeout/times
echo 1 > /sys/block/nullb0/io-timeout-fail
dd if=/dev/zero of=/dev/nullb0 bs=512 count=1 oflag=direct
With this patch, the timeout handler is able to complete the IO.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zoned block device specification do not define the behavior of
discard/trim command as this command is generally replaced by the reset
write pointer (zone reset) command. Emulate this in null_blk by making
zoned and discard options mutually exclusive.
Suggested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch suppresses an uninteresting KMSAN complaint without affecting
performance of the null_blk driver if CONFIG_KMSAN is disabled.
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move all zoned mode related code from null_blk_main.c to
null_blk_zoned.c, avoiding an ugly #ifdef in the process.
Rename null_zone_init() into null_init_zoned_dev(), null_zone_exit()
into null_free_zoned_dev() and add the new function
null_register_zoned_dev() to finalize the zoned dev setup before
add_disk().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For write operations issued to a null_blk device with zoned mode
enabled, the state and write pointer position of the zone targeted by
the command should be checked before badblocks and memory backing
are handled as the write may be first failed due to, for instance, a
sector position not aligned with the zone write pointer. This order of
checking for errors reflects more accuratly the behavior of physical
zoned devices.
Furthermore, the write pointer position of the target zone should be
incremented only and only if no errors are reported by badblocks and
memory backing handling.
To fix this, introduce the small helper function null_process_cmd()
which execute null_handle_badblocks() and null_handle_memory_backed()
and use this function in null_zone_write() to correctly handle write
requests to zoned null devices depending on the type and state of the
write target zone. Also call this function in null_handle_zoned() to
process read requests to zoned null devices.
null_process_cmd() is called directly from null_handle_cmd() for
regular null devices, resulting in no functional change for these type
of devices. To have symmetric names, the function null_handle_zoned()
is renamed to null_process_zoned_cmd().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper. Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the new blk_mq_init_queue_data instead of open coding the queue
allocation and initialization.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As null_blk is a very good start point to test block layer, this patch
adds description and comments to 'timeout', 'requeue' and 'init_hctx' to
explain how to use fault injection with null_blk.
The nvme has similar with nvme_core.fail_request in the form of comment.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Steps to reproduce:
BLKRESETZONE zone 0
// force EIO
pwrite(fd, buf, 4096, 4096);
[issue more IO including zone ioctls]
It will start failing randomly including IO to unrelated zones because of
->error "reuse". Trigger can be partition detection as well if test is not
run immediately which is even more entertaining.
The fix is of course to clear ->error where necessary.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This makes it possible to test the error path in blk_mq_realloc_hw_ctxs()
and also several error paths in null_blk.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If null_add_dev() fails then null_del_dev() is called with a NULL argument.
Make null_del_dev() handle this scenario correctly. This patch fixes the
following KASAN complaint:
null-ptr-deref in null_del_dev+0x28/0x280 [null_blk]
Read of size 8 at addr 0000000000000000 by task find/1062
Call Trace:
dump_stack+0xa5/0xe6
__kasan_report.cold+0x65/0x99
kasan_report+0x16/0x20
__asan_load8+0x58/0x90
null_del_dev+0x28/0x280 [null_blk]
nullb_group_drop_item+0x7e/0xa0 [null_blk]
client_drop_item+0x53/0x80 [configfs]
configfs_rmdir+0x395/0x4e0 [configfs]
vfs_rmdir+0xb6/0x220
do_rmdir+0x238/0x2c0
__x64_sys_unlinkat+0x75/0x90
do_syscall_64+0x6f/0x2f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of initializing null_blk hardware queues explicitly after the
request queue has been created, provide .init_hctx() and .exit_hctx()
callback functions. The latter functions are not only called during
request queue allocation but also when the number of hardware queues
changes. Allocate nr_cpu_ids queues during initialization to support
increasing the number of hardware queues above the initial hardware
queue count.
This change fixes increasing the number of hardware queues above the
initial number of hardware queues and also keeps nullb->nr_queues in
sync with the number of hardware queues.
Fixes: 45919fbfe1 ("null_blk: Enable modifying 'submit_queues' after an instance has been configured")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Although it is not clear to me why UBSAN complains when 'memory_backed'
is set, this patch suppresses the UBSAN complaint that is triggered when
setting that configfs attribute.
UBSAN: Undefined behaviour in drivers/block/null_blk_main.c:327:1
load of value 16 is not a valid value for type '_Bool'
CPU: 2 PID: 8396 Comm: check Not tainted 5.6.0-rc1-dbg+ #14
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0xa5/0xe6
ubsan_epilogue+0x9/0x26
__ubsan_handle_load_invalid_value+0x6d/0x76
nullb_device_memory_backed_store.cold+0x2c/0x38 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x145/0x2c0
ksys_write+0xd7/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x2f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'list', 'll_list' and 'csd' are no longer used.
The 'list' is not used since it was introduced by commit f2298c0403
("null_blk: multi queue aware block test driver").
The 'll_list' is no longer used since commit 3c395a969a ("null_blk: set a
separate timer for each command").
The 'csd' is no longer used since commit ce2c350b2c ("null_blk: use
blk_complete_request and blk_mq_complete_request").
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With gcc-7.2, many instances of
drivers/block/null_blk_main.c: In function ‘nullb_device_zone_nr_conv_store’:
drivers/block/null_blk_main.c:291:12: warning: ‘new_value’ may be used uninitialized in this function [-Wmaybe-uninitialized]
dev->NAME = new_value; \
^
drivers/block/null_blk_main.c:279:7: note: ‘new_value’ was declared here
TYPE new_value; \
^
Presumably notabug, so use uninitialized_var() to suppress them.
Cc: Shaohua Li <shli@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Each line here overflows 80 cols by exactly one character. Delete one tab
per line to fix.
Cc: Shaohua Li <shli@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If BLK_DEV_ZONED isn't set, 'ret' isn't used. This makes gcc complain,
rightfully. Move ret where it is used.
Fixes: 979d54475e ("null_blk: cleanup null_gendisk_register")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current zone revalidation code has a major problem in that it
doesn't update the zone size and q->nr_zones atomically, leading
to a short window where an out of bounds access to the zone arrays
is possible.
To fix this move the setting of the zone size into the crticial
sections blk_revalidate_disk_zones so that it gets updated together
with the zone bitmaps and q->nr_zones. This also slightly simplifies
the caller as it deducts the zone size from the report_zones.
This change also allows to check for a power of two zone size in generic
code.
Reported-by: Hans Holmberg <hans@owltronix.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio based drivers only need to update q->nr_zones. Do that manually
instead of overloading blk_revalidate_disk_zones to keep that function
simpler for the next round of changes that will rely even more on the
request based functionality.
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a saner size calculation, and do a trivial cleanup on the zone
revalidation to prepare to future changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For zoned=1 mode, the zone size must be a power of 2. Check this not
only when the zone size is specified during modprobe, but also when
creating a zoned null_blk device using configfs.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For a null_blk device with zoned mode enabled, the number of
conventional zones can be configured through configfs with the
zone_nr_conv parameter. Add this missing parameter in the features
string.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make the instance name match the method name and define the name to NULL
instead of providing an inline stub, which is rather pointless for a
method call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the pointless stub open and release methods, give the operations
vector a slightly less confusing name, and use normal alignment for the
assignment operators.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A zoned block device maintains a write pointer within a zone, and reads
beyond the write pointer are undefined. Fill data buffer returned above
the write pointer with 0xFF.
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch makes it possible to test blk_mq_update_nr_hw_queues() from
inside a VM.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce a local variable to make the code easier to read. This patch
does not change any functionality but makes the next patch in this
series easier to read.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of writing "null_blk: " at the beginning of each
pr_err/info/warn log message, format messages using pr_fmt() macro.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the variable nr_devices is an unsigned int, the module_param()
should also use this type. Change the type so they can match.
Fixes: f7c4ce890d ("null_blk: validate the number of devices")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The module load should fail only if there is something wrong with the
configuration or if an error prevents it to work properly. The module
should be able to be loaded with (nr_device == 0), since it will not
trigger errors or be in malfunction state. Preventing loading with zero
devices also breaks applications that configures this module using
configfs API. Remove the nr_device check to fix this.
Fixes: f7c4ce890d ("null_blk: validate the number of devices")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A negative number of devices is nonsensical, so change the type to
unsigned. If the number of devices is 0, it is impossible for userspace
to interact with the module, so refuse loading the driver for that case.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The name of the module is "null_blk", not "null". Make `pr_info()` follow
the pattern of `pr_err()` log messages.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Using the helper blk_queue_required_elevator_features(), set the
elevator feature ELEVATOR_F_ZBD_SEQ_WRITE as required for the request
queue of null_blk devices created with zoned mode enabled.
This feature requirement can always be satisfied as the mq-deadline
elevator is always selected for in-kernel compilation when
CONFIG_BLK_DEV_ZONED (zoned block device support) is enabled.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch creates a helper function for handling the request
completion in the null_handle_cmd().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch creates a helper function for handling zoned block device
operations.
This patch also restructured the code for null_blk_zoned.c and uses the
pattern to return blk_status_t and catch the error in the function
null_handle_cmd() into cmd->error variable instead of setting it up in
the deeper layer just like the way it is done for flush, badblocks and
memory backed case in the null_handle_cmd(). We also move
null_handle_zoned() to the null_blk_zoned.c to keep the zoned code
separate.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch creates a helper for handling requests when null_blk is
memory backed in the null_handle_cmd(). Although the helper is very
simple right now, it makes the code flow consistent with the rest of
code in the null_handle_cmd() and provides a uniform code structure
for future code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch creates a helper for handling badblocks code in the
null_handle_cmd().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch creates a helper for handling throttling code in the
null_handle_cmd().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a preparation patch which moves the duplicate code for sectors
and nr_sectors calculations for bio vs request mode into their
respective callers (null_queue_bio(), null_qeueue_req()). Now the core
function only deals with the respective actions and commands instead of
having to calculte the bio vs req operations and different sector
related variables. We also move the flush command handling at the top
which significantly simplifies the rest of the code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch implements newly introduced zone reset all operation for
null_blk driver.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In null_handle_cmd() when device is configured as zoned, variable op is
decalred as an int, where it is used to hold values of type
REQ_OP_XXX which is of type enum req_opf. Change the type from
int to enum req_opf.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In function null_add_dev() struct nullb *nullb member is allocated
using kzalloc_node() which returns 0red memory.
In function setup_queues() which is called from the null_add_dev(), on
successful queue allocation we set the nullb->nr_queues = 0 which is not
needed due to earlier use of kzalloc_node().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Aravind Ramesh