Commit Graph

8 Commits

Author SHA1 Message Date
David Woodhouse 62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Chuck Ebbert cfe91f9ce2 [PATCH] i386: fix singlestepping though a syscall
Do not mask TIF_SINGLESTEP bit in _TIF_WORK_MASK. Masking this stopped
do_notify_resume() from being called when it should have been.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17 08:55:21 -08:00
David Howells 283828f3c1 [PATCH] Handle TIF_RESTORE_SIGMASK for i386
Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled:

        [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc
        [PATCH] 3/3 Generic sys_rt_sigsuspend

It does the following:

 (1) Declares TIF_RESTORE_SIGMASK for i386.

 (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set.

 (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved
     in current->saved_sigmask.

 (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead.

 (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK
     rather than attempting to fudge the return registers.

 (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping
     intrinsically.

 (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or
     -EFAULT rather than true/false to be consistent with the rest of the
     kernel.

Due to the fact do_signal() is then only called from one place:

 (8) Makes do_signal() no longer have a return value is it was just being
     ignored; force_sig() takes care of this.

 (9) Discards the old sigmask argument to do_signal() as it's no longer
     necessary.

(10) Makes do_signal() static.

(11) Marks the second argument to do_notify_resume() as unused. The unused
     argument should remain in the middle as the arguments are passed in as
     registers, and the ordering is specific in entry.S

Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(),
they no longer need access to the exception frame, and so can just take
arguments normally.

This patch depends on sys_rt_sigsuspend patch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:29 -08:00
Al Viro f5a61d0c13 [PATCH] death of get_thread_info/put_thread_info
{get,put}_thread_info() were introduced in 2.5.4 and never
had been called by anything in the tree.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:59 -08:00
Sam Ravnborg 86feeaa812 kbuild: full dependency check on asm-offsets.h
Building asm-offsets.h has been moved to a seperate Kbuild file
located in the top-level directory. This allow us to share the
functionality across the architectures.

The old rules in architecture specific Makefiles will die
in subsequent patches.

Furhtermore the usual kbuild dependency tracking is now used
when deciding to rebuild asm-offsets.s. So we no longer risk
to fail a rebuild caused by asm-offsets.c dependencies being touched.

With this common rule-set we now force the same name across
all architectures. Following patches will fix the rest.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 19:28:28 +02:00
Laurent Vivier ed75e8d580 [PATCH] UML Support - Ptrace: adds the host SYSEMU support, for UML and general usage
Jeff Dike <jdike@addtoit.com>,
      Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>,
      Bodo Stroesser <bstroesser@fujitsu-siemens.com>

Adds a new ptrace(2) mode, called PTRACE_SYSEMU, resembling PTRACE_SYSCALL
except that the kernel does not execute the requested syscall; this is useful
to improve performance for virtual environments, like UML, which want to run
the syscall on their own.

In fact, using PTRACE_SYSCALL means stopping child execution twice, on entry
and on exit, and each time you also have two context switches; with SYSEMU you
avoid the 2nd stop and so save two context switches per syscall.

Also, some architectures don't have support in the host for changing the
syscall number via ptrace(), which is currently needed to skip syscall
execution (UML turns any syscall into getpid() to avoid it being executed on
the host).  Fixing that is hard, while SYSEMU is easier to implement.

* This version of the patch includes some suggestions of Jeff Dike to avoid
  adding any instructions to the syscall fast path, plus some other little
  changes, by myself, to make it work even when the syscall is executed with
  SYSENTER (but I'm unsure about them). It has been widely tested for quite a
  lot of time.

* Various fixed were included to handle the various switches between
  various states, i.e. when for instance a syscall entry is traced with one of
  PT_SYSCALL / _SYSEMU / _SINGLESTEP and another one is used on exit.
  Basically, this is done by remembering which one of them was used even after
  the call to ptrace_notify().

* We're combining TIF_SYSCALL_EMU with TIF_SYSCALL_TRACE or TIF_SINGLESTEP
  to make do_syscall_trace() notice that the current syscall was started with
  SYSEMU on entry, so that no notification ought to be done in the exit path;
  this is a bit of a hack, so this problem is solved in another way in next
  patches.

* Also, the effects of the patch:
"Ptrace - i386: fix Syscall Audit interaction with singlestep"
are cancelled; they are restored back in the last patch of this series.

Detailed descriptions of the patches doing this kind of processing follow (but
I've already summed everything up).

* Fix behaviour when changing interception kind #1.

  In do_syscall_trace(), we check the status of the TIF_SYSCALL_EMU flag
  only after doing the debugger notification; but the debugger might have
  changed the status of this flag because he continued execution with
  PTRACE_SYSCALL, so this is wrong.  This patch fixes it by saving the flag
  status before calling ptrace_notify().

* Fix behaviour when changing interception kind #2:
  avoid intercepting syscall on return when using SYSCALL again.

  A guest process switching from using PTRACE_SYSEMU to PTRACE_SYSCALL
  crashes.

  The problem is in arch/i386/kernel/entry.S.  The current SYSEMU patch
  inhibits the syscall-handler to be called, but does not prevent
  do_syscall_trace() to be called after this for syscall completion
  interception.

  The appended patch fixes this.  It reuses the flag TIF_SYSCALL_EMU to
  remember "we come from PTRACE_SYSEMU and now are in PTRACE_SYSCALL", since
  the flag is unused in the depicted situation.

* Fix behaviour when changing interception kind #3:
  avoid intercepting syscall on return when using SINGLESTEP.

  When testing 2.6.9 and the skas3.v6 patch, with my latest patch and had
  problems with singlestepping on UML in SKAS with SYSEMU.  It looped
  receiving SIGTRAPs without moving forward.  EIP of the traced process was
  the same for all SIGTRAPs.

What's missing is to handle switching from PTRACE_SYSCALL_EMU to
PTRACE_SINGLESTEP in a way very similar to what is done for the change from
PTRACE_SYSCALL_EMU to PTRACE_SYSCALL_TRACE.

I.e., after calling ptrace(PTRACE_SYSEMU), on the return path, the debugger is
notified and then wake ups the process; the syscall is executed (or skipped,
when do_syscall_trace() returns 0, i.e.  when using PTRACE_SYSEMU), and
do_syscall_trace() is called again.  Since we are on the return path of a
SYSEMU'd syscall, if the wake up is performed through ptrace(PTRACE_SYSCALL),
we must still avoid notifying the parent of the syscall exit.  Now, this
behaviour is extended even to resuming with PTRACE_SINGLESTEP.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:20 -07:00
Jesper Juhl dcd497f99a [PATCH] streamline preempt_count type across archs
The preempt_count member of struct thread_info is currently either defined
as int, unsigned int or __s32 depending on arch.  This patch makes the type
of preempt_count an int on all archs.

Having preempt_count be an unsigned type prevents the catching of
preempt_count < 0 bugs, and using int on some archs and __s32 on others is
not exactely "neat" - much nicer when it's just int all over.

A previous version of this patch was already ACK'ed by Robert Love, and the
only change in this version of the patch compared to the one he ACK'ed is
that this one also makes sure the preempt_count member is consistently
commented.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:19 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00