Commit Graph

184 Commits

Author SHA1 Message Date
Sean Hefty 2aec5c602c IB/sa: Make sure SA queries use default P_Key
MADs sent to the SA should use the the default P_Key (0x7fff/0xffff).
There's no requirement that the default P_Key is stored at index 0 in
the local P_Key table, so add code to the sa_query module to look up
the index of the default P_Key when creating an address handle for the
SA (which is done any time the P_Key table might change), and use this
index for all SA queries.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-10 21:45:31 -07:00
Linus Torvalds 8aee74c8ee Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/cm: Improve local id allocation
  IPoIB/cm: Fix SRQ WR leak
  IB/ipoib: Fix typos in error messages
  IB/mlx4: Check if SRQ is full when posting receive
  IB/mlx4: Pass send queue sizes from userspace to kernel
  IB/mlx4: Fix check of opcode in mlx4_ib_post_send()
  mlx4_core: Fix array overrun in dump_dev_cap_flags()
  IB/mlx4: Fix RESET to RESET and RESET to ERROR transitions
  IB/mthca: Fix RESET to ERROR transition
  IB/mlx4: Set GRH:HopLimit when sending globally routed MADs
  IB/mthca: Set GRH:HopLimit when building MLX headers
  IB/mlx4: Fix check of max_qp_dest_rdma in modify QP
  IB/mthca: Fix use-after-free on device restart
  IB/ehca: Return proper error code if register_mr fails
  IPoIB: Handle P_Key table reordering
  IB/core: Use start_port() and end_port()
  IB/core: Add helpers for uncached GID and P_Key searches
  IB/ipath: Fix potential deadlock with multicast spinlocks
  IB/core: Free umem when mm is already gone
2007-05-21 16:19:32 -07:00
Alexey Dobriyan e8edc6e03a Detach sched.h from mm.h
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:18:19 -07:00
Yosef Etigin 5eb620c81c IB/core: Add helpers for uncached GID and P_Key searches
Add ib_find_gid() and ib_find_pkey() functions that use uncached device
queries.  The calls might block but the returns are always up-to-date.
Cache P_Key and GID table lengths in core to avoid extra port info queries.

Signed-off-by: Yosef Etigin <yosefe@voltaire.com>
Acked-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:53 -07:00
Roland Dreier 1bf66a3042 IB: Put rlimit accounting struct in struct ib_umem
When memory pinned with ib_umem_get() is released, ib_umem_release()
needs to subtract the amount of memory being unpinned from
mm->locked_vm.  However, ib_umem_release() may be called with
mm->mmap_sem already held for writing if the memory is being released
as part of an munmap() call, so it is sometimes necessary to defer
this accounting into a workqueue.

However, the work struct used to defer this accounting is dynamically
allocated before it is queued, so there is the possibility of failing
that allocation.  If the allocation fails, then ib_umem_release has no
choice except to bail out and leave the process with a permanently
elevated locked_vm.

Fix this by allocating the structure to defer accounting as part of
the original struct ib_umem, so there's no possibility of failing a
later allocation if creating the struct ib_umem and pinning memory
succeeds.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-08 18:00:37 -07:00
Roland Dreier f7c6a7b5d5 IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules
Export ib_umem_get()/ib_umem_release() and put low-level drivers in
control of when to call ib_umem_get() to pin and DMA map userspace,
rather than always calling it in ib_uverbs_reg_mr() before calling the
low-level driver's reg_user_mr method.

Also move these functions to be in the ib_core module instead of
ib_uverbs, so that driver modules using them do not depend on
ib_uverbs.

This has a number of advantages:
 - It is better design from the standpoint of making generic code a
   library that can be used or overridden by device-specific code as
   the details of specific devices dictate.
 - Drivers that do not need to pin userspace memory regions do not
   need to take the performance hit of calling ib_mem_get().  For
   example, although I have not tried to implement it in this patch,
   the ipath driver should be able to avoid pinning memory and just
   use copy_{to,from}_user() to access userspace memory regions.
 - Buffers that need special mapping treatment can be identified by
   the low-level driver.  For example, it may be possible to solve
   some Altix-specific memory ordering issues with mthca CQs in
   userspace by mapping CQ buffers with extra flags.
 - Drivers that need to pin and DMA map userspace memory for things
   other than memory regions can use ib_umem_get() directly, instead
   of hacks using extra parameters to their reg_phys_mr method.  For
   example, the mlx4 driver that is pending being merged needs to pin
   and DMA map QP and CQ buffers, but it does not need to create a
   memory key for these buffers.  So the cleanest solution is for mlx4
   to call ib_umem_get() in the create_qp and create_cq methods.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-08 18:00:37 -07:00
Linus Torvalds 972d45fb43 Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Convert to NAPI
  IB: Return "maybe missed event" hint from ib_req_notify_cq()
  IB: Add CQ comp_vector support
  IB/ipath: Fix a race condition when generating ACKs
  IB/ipath: Fix two more spin lock problems
  IB/fmr_pool: Add prefix to all printks
  IB/srp: Set proc_name
  IB/srp: Add orig_dgid sysfs attribute to scsi_host
  IPoIB/cm: Don't crash if remote side uses one QP for both directions
  RDMA/cxgb3: Support for new abort logic
  RDMA/cxgb3: Initialize cpu_idx field in cpl_close_listserv_req message
  RDMA/cxgb3: Fail qp creation if the requested max_inline is too large
  RDMA/cxgb3: Fix TERM codes
  IPoIB/cm: Fix error handling in ipoib_cm_dev_open()
  IB/ipath: Don't corrupt pending mmap list when unmapped objects are freed
  IB/mthca: Work around kernel QP starvation
  IB/ipath: Don't put QP in timeout queue if waiting to send
  IB/ipath: Don't call spin_lock_irq() from interrupt context
2007-05-07 12:18:21 -07:00
Roland Dreier ed23a72778 IB: Return "maybe missed event" hint from ib_req_notify_cq()
The semantics defined by the InfiniBand specification say that
completion events are only generated when a completions is added to a
completion queue (CQ) after completion notification is requested.  In
other words, this means that the following race is possible:

	while (CQ is not empty)
		ib_poll_cq(CQ);
	// new completion is added after while loop is exited
	ib_req_notify_cq(CQ);
	// no event is generated for the existing completion

To close this race, the IB spec recommends doing another poll of the
CQ after requesting notification.

However, it is not always possible to arrange code this way (for
example, we have found that NAPI for IPoIB cannot poll after
requesting notification).  Also, some hardware (eg Mellanox HCAs)
actually will generate an event for completions added before the call
to ib_req_notify_cq() -- which is allowed by the spec, since there's
no way for any upper-layer consumer to know exactly when a completion
was really added -- so the extra poll of the CQ is just a waste.

Motivated by this, we add a new flag "IB_CQ_REPORT_MISSED_EVENTS" for
ib_req_notify_cq() so that it can return a hint about whether the a
completion may have been added before the request for notification.
The return value of ib_req_notify_cq() is extended so:

	 < 0	means an error occurred while requesting notification
	== 0	means notification was requested successfully, and if
		IB_CQ_REPORT_MISSED_EVENTS was passed in, then no
		events were missed and it is safe to wait for another
		event.
	 > 0	is only returned if IB_CQ_REPORT_MISSED_EVENTS was
		passed in.  It means that the consumer must poll the
		CQ again to make sure it is empty to avoid the race
		described above.

We add a flag to enable this behavior rather than turning it on
unconditionally, because checking for missed events may incur
significant overhead for some low-level drivers, and consumers that
don't care about the results of this test shouldn't be forced to pay
for the test.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-06 21:18:11 -07:00
Michael S. Tsirkin f4fd0b224d IB: Add CQ comp_vector support
Add a num_comp_vectors member to struct ib_device and extend
ib_create_cq() to pass in a comp_vector parameter -- this parallels
the userspace libibverbs API.  Update all hardware drivers to set
num_comp_vectors to 1 and have all ULPs pass 0 for the comp_vector
value.  Pass the value of num_comp_vectors to userspace rather than
hard-coding a value of 1.

We want multiple CQ event vector support (via MSI-X or similar for
adapters that can generate multiple interrupts), but it's not clear
how many vectors we want, or how we want to deal with policy issues
such as how to decide which vector to use or how to set up interrupt
affinity.  This patch is useful for experimenting, since no core
changes will be necessary when updating a driver to support multiple
vectors, and we know that we want to make at least these changes
anyway.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-06 21:18:11 -07:00
Jean Delvare 6473d160b4 PCI: Cleanup the includes of <linux/pci.h>
I noticed that many source files include <linux/pci.h> while they do
not appear to need it. Here is an attempt to clean it all up.

In order to find all possibly affected files, I searched for all
files including <linux/pci.h> but without any other occurence of "pci"
or "PCI". I removed the include statement from all of these, then I
compiled an allmodconfig kernel on both i386 and x86_64 and fixed the
false positives manually.

My tests covered 66% of the affected files, so there could be false
positives remaining. Untested files are:

arch/alpha/kernel/err_common.c
arch/alpha/kernel/err_ev6.c
arch/alpha/kernel/err_ev7.c
arch/ia64/sn/kernel/huberror.c
arch/ia64/sn/kernel/xpnet.c
arch/m68knommu/kernel/dma.c
arch/mips/lib/iomap.c
arch/powerpc/platforms/pseries/ras.c
arch/ppc/8260_io/enet.c
arch/ppc/8260_io/fcc_enet.c
arch/ppc/8xx_io/enet.c
arch/ppc/syslib/ppc4xx_sgdma.c
arch/sh64/mach-cayman/iomap.c
arch/xtensa/kernel/xtensa_ksyms.c
arch/xtensa/platform-iss/setup.c
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-mpc.c
drivers/media/video/saa711x.c
drivers/misc/hdpuftrs/hdpu_cpustate.c
drivers/misc/hdpuftrs/hdpu_nexus.c
drivers/net/au1000_eth.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fec_8xx/fec_mii.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/fs_enet/mac-fcc.c
drivers/net/fs_enet/mac-fec.c
drivers/net/fs_enet/mac-scc.c
drivers/net/fs_enet/mii-bitbang.c
drivers/net/fs_enet/mii-fec.c
drivers/net/ibm_emac/ibm_emac_core.c
drivers/net/lasi_82596.c
drivers/parisc/hppb.c
drivers/sbus/sbus.c
drivers/video/g364fb.c
drivers/video/platinumfb.c
drivers/video/stifb.c
drivers/video/valkyriefb.c
include/asm-arm/arch-ixp4xx/dma.h
sound/oss/au1550_ac97.c

I would welcome test reports for these files. I am fine with removing
the untested files from the patch if the general opinion is that these
changes aren't safe. The tested part would still be nice to have.

Note that this patch depends on another header fixup patch I submitted
to LKML yesterday:
  [PATCH] scatterlist.h needs types.h
  http://lkml.org/lkml/2007/3/01/141

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:35 -07:00
Sean Hefty c8f6a362bf RDMA/cma: Add multicast communication support
Extend rdma_cm to support multicast communication.  Multicast support
is added to the existing RDMA_PS_UDP port space, as well as a new
RDMA_PS_IPOIB port space.  The latter port space allows joining the
multicast groups used by IPoIB, which enables offloading IPoIB traffic
to a separate QP.  The port space determines the signature used in the
MGID when joining the group.  The newly added RDMA_PS_IPOIB also
allows for unicast operations, similar to RDMA_PS_UDP.

Supporting the RDMA_PS_IPOIB requires changing how UD QPs are initialized,
since we can no longer assume that the qkey is constant.  This requires
saving the Q_Key to use when attaching to a device, so that it is
available when creating the QP.  The Q_Key information is exported to
the user through the existing rdma_init_qp_attr() interface.

Multicast support is also exported to userspace through the rdma_ucm.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 14:29:07 -08:00
Sean Hefty faec2f7b96 IB/sa: Track multicast join/leave requests
The IB SA tracks multicast join/leave requests on a per port basis and
does not do any reference counting: if two users of the same port join
the same group, and one leaves that group, then the SA will remove the
port from the group even though there is one user who wants to stay a
member left.  Therefore, in order to support multiple users of the
same multicast group from the same port, we need to perform reference
counting locally.

To do this, add an multicast submodule to ib_sa to perform reference
counting of multicast join/leave operations.  Modify ib_ipoib (the
only in-kernel user of multicast) to use the new interface.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 14:20:02 -08:00
Jason Gunthorpe fa7252ed4d IB: Make sure struct ib_user_mad.data is aligned
Make the untyped data region in ib_user_mad have type u64 so that it
gets aligned properly.  This avoids alignment faults in ib_umad when
casting the data field to an rmpp_mad and accessing the 64-bit tid
field on architectures like ia64.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-04 14:11:56 -08:00
Michael S. Tsirkin 062dbb69f3 IB: Return qp pointer as part of ib_wc
struct ib_wc currently only includes the local QP number: this matches
the IB spec, but seems mostly useless. The following patch replaces
this with the pointer to qp itself, and updates all low level drivers
and all users.

This has the following advantages:
- Ability to get a per-qp context through wc->qp->qp_context
- Existing drivers already have the qp pointer ready in poll cq, so
  this change actually saves a tiny bit (extra memory read) on data path
  (for ehca it would actually be expensive to find the QP pointer when
  polling a CQ, but ehca does not support SRQ so we can leave wc->qp as
  NULL for ehca)
- Users that need the QP number can still get it through wc->qp->qp_num

Use case:

In IPoIB connected mode code, I have a common CQ shared by multiple
QPs.  To track connection usage, I need a way to get at some per-QP
context upon the completion, and I would like to avoid allocating
context object per work request just to stick a QP pointer into it.
With this code, I can just use wc->qp->qp_context.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-04 14:11:55 -08:00
Michael S. Tsirkin 459d6e2a54 IB: Include <linux/kref.h> explicitly in <rdma/ib_verbs.h>
<rdma/ib_verbs.h> uses struct kref, so it should include <linux/kref.h>
explicitly to avoid hidden include dependencies.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-04 14:11:55 -08:00
Roland Dreier c59a3da134 IB: Fix ib_dma_alloc_coherent() wrapper
The ib_dma_alloc_coherent() wrapper uses a u64* for the dma_handle
parameter, unlike dma_alloc_coherent, which uses dma_addr_t*.  This
means that we need a temporary variable to handle the case when
ib_dma_alloc_coherent() just falls through directly to
dma_alloc_coherent() on architectures where sizeof u64 != sizeof
dma_addr_t.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-15 13:57:26 -08:00
Ben Collins d1998ef38a [PATCH] ib_verbs: Use explicit if-else statements to avoid errors with do-while macros
At least on PPC, the "op ? op : dma" construct causes a compile failure
because the dma_* is a do{}while(0) macro.

This turns all of them into proper if/else to avoid this problem.

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 19:47:13 -08:00
Ralph Campbell 9b513090a3 IB: Add DMA mapping functions to allow device drivers to interpose
The QLogic InfiniPath HCAs use programmed I/O instead of HW DMA.
This patch allows a verbs device driver to interpose on DMA mapping
function calls in order to avoid relying on bus_to_virt() and
phys_to_virt() to undo the mappings created by dma_map_single(),
dma_map_sg(), etc.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12 14:27:41 -08:00
Sean Hefty 7521663857 RDMA/cma: Export rdma cm interface to userspace
Export the rdma cm interfaces to userspace via a misc device.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12 11:50:22 -08:00
Sean Hefty 628e5f6d39 RDMA/cma: Add support for RDMA_PS_UDP
Allow the use of UD QPs through the rdma_cm, in order to provide
address translation services for resolving IB addresses for datagram
messages using SIDR.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12 11:50:21 -08:00
Sean Hefty 0fe313b000 RDMA/cma: Allow early transition to RTS to handle lost CM messages
During connection establishment, the passive side of a connection can
receive messages from the active side before the connection event has
been delivered to the user.  Allow the passive side to send messages
in response to received data before the event is delivered.  To handle
the case where the connection messages are lost, a new rdma_notify()
function is added that users may invoke to force a connection into the
established state.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12 11:50:21 -08:00
Sean Hefty a1b1b61f80 RDMA/cma: Report connect info with connect events
Connection information was never given to the recipient of a
connection request or reply message.  Only the event was delivered.
Report the connection data with the event to allows user to
reject the connection based on the requested parameters, or adjust
their resources to match the request.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12 11:50:21 -08:00
Sean Hefty 9b2e9c0c24 RDMA/cma: Remove unneeded qp_type parameter from rdma_cm
The qp_type parameter into the rdma_cm is unneeded, and can be
misleading.  The QP type should be determined from the port space.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12 11:50:21 -08:00
Sean Hefty e1444b5a16 IB/cm: Fix automatic path migration support
The ib_cm_establish() function is replaced with a more generic
ib_cm_notify().  This routine is used to notify the CM that failover
has occurred, so that future CM messages (LAP, DREQ) reach the remote
CM.  (Currently, we continue to use the original path)  This bumps the
userspace CM ABI.

New alternate path information is captured when a LAP message is sent
or received.  This allows QP attributes to be initialized for the user
when a new path is loaded after failover occurs.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:10 -08:00
Sean Hefty 7a118df3ea RDMA/addr: Use client registration to fix module unload race
Require registration with ib_addr module to prevent caller from
unloading while a callback is in progress.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-02 14:26:04 -08:00
Jack Morgenstein 0b26c88f29 IB/uverbs: Return sq_draining value in query_qp response
Return the sq_draining value back to user space for query_qp instead
of the en_sqd_async notify value, which is valid only for
modify_qp.  For query_qp, the draining status should returned.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-30 21:19:35 -08:00
Michael S. Tsirkin aec79fcc3e IB/sa: fix ib_sa_selector names
Relevant SA queries are actually "greater than" / "less than", not
"greater than or equal" / "less than or equal" as the names imply.
(See IB spec 1.2 Vol 1, 15.2.5.16 PATHRECORD/Table 205 PathRecord)

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:55 -07:00
Or Gerlitz 951f7fc137 RDMA/cma: Document rdma_accept() error handling
Document the reject sending and modifying QP to error done in rdma_accept().

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:54 -07:00
Or Gerlitz 07eeec0627 RDMA/cma: Document rdma_destroy_id() function
Clarify that rdma_destroy_id cancels outstanding asynchronous operations on the
Associated id.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:54 -07:00
Michael S. Tsirkin c1a0b23bf4 IB/sa: Require SA registration
Require users to register with SA module, to prevent the sa_query
module text from going away while an SA query callback is still
running.  Update all in-tree users for the new interface.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:53 -07:00
Tom Tucker 07ebafbaaa RDMA: iWARP Core Changes.
Modifications to the existing rdma header files, core files, drivers,
and ulp files to support iWARP, including:
 - Hook iWARP CM into the build system and use it in rdma_cm.
 - Convert enum ib_node_type to enum rdma_node_type, which includes
   the possibility of RDMA_NODE_RNIC, and update everything for this.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:47 -07:00
Tom Tucker 922a8e9fb2 RDMA: iWARP Connection Manager.
Add an iWARP Connection Manager (CM), which abstracts connection
management for iWARP devices (RNICs).  It is a logical instance of the
xx_cm where xx is the transport type (ib or iw).  The symbols exported
are used by the transport independent rdma_cm module, and are
available also for transport dependent ULPs.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:46 -07:00
Ralph Campbell 9bc57e2d19 IB/uverbs: Pass userspace data to modify_srq and modify_qp methods
Pass a struct ib_udata to the low-level driver's ->modify_srq() and
->modify_qp() methods, so that it can get to the device-specific data
passed in by the userspace driver.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:25 -07:00
Ralph Campbell 64f817ba98 IB/uverbs: Allow resize CQ operation to return driver-specific data
Add a ib_uverbs_resize_cq_resp.driver_data field so that low-level
drivers can return data from a resize CQ operation to userspace.  Have
ib_uverbs_resize_cq() only copy the cqe field, to avoid having to bump
the userspace ABI.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:24 -07:00
David Woodhouse fadcfa33b6 [HEADERS] One line per header in Kbuild files to reduce conflicts
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-19 12:43:58 +01:00
Sean Hefty 2527e681fd IB/mad: Validate MADs for spec compliance
Validate MADs sent by userspace clients for spec compliance with
C13-18.1.1 (prevent duplicate requests and responses sent on the
same port).  Without this, RMPP transactions get aborted because
of duplicate packets.

This patch is similar to that provided by Jack Morgenstein.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24 09:18:07 -07:00
Michael S. Tsirkin adfaa888a2 [PATCH] fmr pool: remove unnecessary pointer dereference
ib_fmr_pool_map_phys gets the virtual address by pointer but never writes
there, and users (e.g.  srp) seem to assume this and ignore the value
returned.  This patch cleans up the API to get the VA by value, and updates
all users.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Acked-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14 21:53:51 -07:00
Michael S. Tsirkin f0ee3404cc [PATCH] IB/addr: gid structure alignment fix
The device address contains unsigned character arrays, which contain raw GID
addresses.  The GIDs may not be naturally aligned, so do not cast them to
structures or unions.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14 21:53:50 -07:00
Linus Torvalds 6fa0cb1141 Merge git://git.infradead.org/hdrinstall-2.6
* git://git.infradead.org/hdrinstall-2.6:
  Remove export of include/linux/isdn/tpam.h
  Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export
  Restrict headers exported to userspace for SPARC and SPARC64
  Add empty Kbuild files for 'make headers_install' in remaining arches.
  Add Kbuild file for Alpha 'make headers_install'
  Add Kbuild file for SPARC 'make headers_install'
  Add Kbuild file for IA64 'make headers_install'
  Add Kbuild file for S390 'make headers_install'
  Add Kbuild file for i386 'make headers_install'
  Add Kbuild file for x86_64 'make headers_install'
  Add Kbuild file for PowerPC 'make headers_install'
  Add generic Kbuild files for 'make headers_install'
  Basic implementation of 'make headers_check'
  Basic implementation of 'make headers_install'
2006-07-04 12:55:45 -07:00
David Woodhouse 8555255f0b Add generic Kbuild files for 'make headers_install'
This adds the Kbuild files listing the files which are to be installed by
the 'headers_install' make target, in generic directories.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-18 12:14:01 +01:00
Roland Dreier 9ead190bfd IB/uverbs: Don't serialize with ib_uverbs_idr_mutex
Currently, all userspace verbs operations that call into the kernel
are serialized by ib_uverbs_idr_mutex.  This can be a scalability
issue for some workloads, especially for devices driven by the ipath
driver, which needs to call into the kernel even for datapath
operations.

Fix this by adding reference counts to the userspace objects, and then
converting ib_uverbs_idr_mutex into a spinlock that only protects the
idrs long enough to take a reference on the object being looked up.
Because remove operations may fail, we have to do a slightly funky
two-step deletion, which is described in the comments at the top of
uverbs_cmd.c.

This also still leaves ib_uverbs_idr_lock as a single lock that is
possibly subject to contention.  However, the lock hold time will only
be a single idr operation, so multiple threads should still be able to
make progress, even if ib_uverbs_idr_lock is being ping-ponged.

Surprisingly, these changes even shrink the object code:

add/remove: 23/5 grow/shrink: 4/21 up/down: 633/-693 (-60)

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:44:49 -07:00
Sean Hefty 6d969a471b IB/sa: Add ib_init_ah_from_path()
Add a call to initialize address handle attributes given a path record.
This is used by the CM, and would be useful for users of UD QPs.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:39 -07:00
Sean Hefty 4e00d69454 IB: Add ib_init_ah_from_wc()
Add a function to initialize address handle attributes from a work
completion.  This functionality is duplicated by both verbs and the CM.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:39 -07:00
Sean Hefty 75af908851 IB/ucm: Get rid of duplicate P_Key parameter
The P_Key is provided into a SIDR REQ in two places, once as a
parameter, and again in the path record.  Remove the P_Key as a
parameter and always use the one given in the path record.

This change has no practical effect on ABI functionality.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:39 -07:00
Leonid Arsh da2ab62ab5 IB: Move struct port_info from ipath to <rdma/ib_smi.h>
Move ipath's struct port_info into <rdma/ib_smi.h>, so that it can be
used by mthca to implement client reregister support.

Remove the __attribute__((packed)) because all the members of the struct
are naturally aligned anyway.

Signed-off-by: Leonid Arsh <leonida@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:36 -07:00
Leonid Arsh 63942c9a98 IB: Add client reregister event type
Add IB_EVENT_CLIENT_REREGISTER to enum so low-level drivers can
generate "client reregister" events.

Signed-off-by: Leonid Arsh <leonida@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:35 -07:00
Jack Morgenstein 6fb9cdbf2c IB: Add caching of ports' LMC
Add an LMC cache to struct ib_device, and add a function
ib_get_cached_lmc() to query the cache.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:34 -07:00
Sean Hefty e51060f08a IB: IP address based RDMA connection manager
Kernel connection management agent over InfiniBand that connects based
on IP addresses.  The agent defines a generic RDMA connection
abstraction to support clients wanting to connect over different RDMA
devices.

The agent also handles RDMA device hotplug events on behalf of clients.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:29 -07:00
Sean Hefty 7025fcd36b IB: address translation to map IP toIB addresses (GIDs)
Add an address translation service that maps IP addresses to
InfiniBand GID addresses using IPoIB.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:28 -07:00
Sean Hefty 6e61d04f2d IB/cm: Match connection requests based on private data
Extend matching connection requests to listens in the InfiniBand CM to
include private data checks.

This allows applications to listen on the same service identifier,
with private data directing the request to the appropriate application.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:28 -07:00
Sean Hefty 6a9af2e18a IB: common handling for marshalling parameters to/from userspace
Provide common handling for marshalling data between userspace clients
and kernel InfiniBand drivers.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:27 -07:00
Jack Morgenstein bf6a9e31cf IB: simplify static rate encoding
Push translation of static rate to HCA format into low-level drivers,
where it belongs.  For static rate encoding, use encoding of rate
field from IB standard PathRecord, with addition of value 0, for
backwards compatibility with current usage.  The changes are:

 - Add enum ib_rate to midlayer includes.
 - Get rid of static rate translation in IPoIB; just use static rate
   directly from Path and MulticastGroup records.
 - Update mthca driver to translate absolute static rate into the
   format used by hardware.  This also fixes mthca's static rate
   handling for HCAs that are capable of 4X DDR.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10 09:43:47 -07:00
Hal Rosenstock 618a3c03fc IB/mad: RMPP support for additional classes
Add RMPP support for additional management classes that support it.
Also, validate RMPP is consistent with management class specified.

Signed-off-by: Hal Rosenstock <halr@voltaire.com>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-30 07:19:51 -08:00
Jack Morgenstein f36e1793e2 IB/umad: Add support for large RMPP transfers
Add support for sending and receiving large RMPP transfers.  The old
code supports transfers only as large as a single contiguous kernel
memory allocation.  This patch uses linked list of memory buffers when
sending and receiving data to avoid needing contiguous pages for
larger transfers.

  Receive side: copy the arriving MADs in chunks instead of coalescing
  to one large buffer in kernel space.

  Send side: split a multipacket MAD buffer to a list of segments,
  (multipacket_list) and send these using a gather list of size 2.
  Also, save pointer to last sent segment, and retrieve requested
  segments by walking list starting at last sent segment. Finally,
  save pointer to last-acked segment.  When retrying, retrieve
  segments for resending relative to this pointer.  When updating last
  ack, start at this pointer.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:23 -08:00
Dotan Barak ea88fd16d6 IB/uverbs: Return actual capacity from create SRQ operation
Pass actual capacity of created SRQ back to userspace, so that
userspace can report accurate capacities.  This requires an ABI bump,
to change struct ib_uverbs_create_srq_resp.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:16 -08:00
Dotan Barak abb6e9ba17 IB/mthca: Return actual capacity from create_srq
Have mthca's create_srq method return the actual capacity of the SRQ
that gets created.  Also update comments in <rdma/ib_verbs.h> to
clarify that this is what is expected from ib_create_srq().

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:16 -08:00
Roland Dreier 4d9781c5ce IB/uverbs: Fix alignment of struct ib_uverbs_create_qp_resp
The size of struct ib_uverbs_create_qp_resp is not even multiple of 8
bytes.  This causes problems for low-level drivers that add private
data after the structure: 32-bit userspace will look in the wrong
place for a response from a 64-bit kernel.  Fix this by adding a
reserved field.  Also, bump the ABI version because this changes the
size of a structure.

Pointed out by Hoang-Nam Nguyen <HNGUYEN@de.ibm.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:16 -08:00
Dotan Barak 8bdb0e8632 IB/uverbs: Support for query SRQ from userspace
Add support to uverbs to handle querying userspace SRQs (shared
receive queues), including adding an ABI for marshalling requests and
responses.  The kernel midlayer already has the underlying
ib_query_srq() function.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:14 -08:00
Dotan Barak 7ccc9a24e0 IB/uverbs: Support for query QP from userspace
Add support to uverbs to handle querying userspace QPs (queue pairs),
including adding an ABI for marshalling requests and responses.  The
kernel midlayer already has the underlying ib_query_qp() function.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:14 -08:00
Roland Dreier a74cd4af0b IB: Whitespace cleanups
Remove trailing whitespace and fix indentation that with spaces
instead of tabs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:13 -08:00
Roland Dreier 8a51866f08 IB: Add ib_modify_qp_is_ok() library function
The in-kernel mthca driver contains a table of which attributes are
valid for each queue pair state transition.  It turns out that both
other IB drivers -- ipath and ehca -- which are being prepared for
merging have copied this table, errors and all.

To forestall this code duplication, move this table and the code to
check parameters against it into a midlayer library function,
ib_modify_qp_is_ok().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:12 -08:00
Or Gerlitz d36f34aadf IB: Enable FMR pool user to set page size
This patch allows the consumer to set the page size of "pages" mapped
by the pool FMRs, which is a feature already existing in the base
verbs API.  On the cosmetic side it changes ib_fmr_attr.page_size field
to be named page_shift.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:10 -08:00
Roland Dreier c5bcbbb9fe IB: Allow userspace to set node description
Expose a writable "node_desc" sysfs attribute for InfiniBand devices.
This allows userspace to update the node description with information
such as the node's hostname, so that IB network management software
can tie its view to the real world.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:09 -08:00
Roland Dreier 33b9b3ee97 IB: Add userspace support for resizing CQs
Add support to uverbs to handle resizing userspace CQs (completion
queues), including adding an ABI for marshalling requests and
responses.  The kernel midlayer already has ib_resize_cq().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:07 -08:00
Sean Hefty cf311cd49a IB: Add node_guid to struct ib_device
Add a node_guid field to struct ib_device.  It is the responsibility
of the low-level driver to initialize this field before registering a
device with the midlayer.  Convert everyone to looking at this field
instead of calling ib_query_device() when all they want is the node
GUID, and remove the node_guid field from struct ib_device_attr.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-10 07:39:34 -08:00
Jack Morgenstein 77369ed31d [IB] uverbs: have kernel return QP capabilities
Move the computation of QP capabilities (max scatter/gather entries,
max inline data, etc) into the kernel, and have the uverbs module
return the values as part of the create QP response.  This keeps
precise knowledge of device limits in the low-level kernel driver.

This requires an ABI bump, so while we're making changes, get rid of
the max_sge parameter for the modify SRQ command -- it's not used and
shouldn't be there.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10 10:22:50 -08:00
Roland Dreier 40de2e548c [IB] Have cq_resize() method take an int, not int*
Change the struct ib_device.resize_cq() method to take a plain integer
that holds the new CQ size, rather than a pointer to an integer that
it uses to return the new size.  This makes the interface match the
exported ib_resize_cq() signature, and allows the low-level driver to
update the CQ size with proper locking if necessary.

No in-tree drivers are exporting this method yet.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10 10:22:50 -08:00
Sean Hefty 7b28b0d000 [IB] ucm: 32/64 compatibility fixes
Fix structure layouts to ensure same size on 32-bit and 64-bit architectures.
This permits 32-bit userspace apps on a 64-bit kernel.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-01 13:18:54 -08:00
Sean Hefty 34816ad98e [IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped
The MAD layer was violating the DMA API by touching data buffers used
for sends after the DMA mapping was done.  This causes problems on
non-cache-coherent architectures, because the device doing DMA won't
see updates to the payload buffers that exist only in the CPU cache.

Fix this by having all MAD consumers use ib_create_send_mad() to
allocate their send buffers, and moving the DMA mapping into the MAD
layer so it can be done just before calling send (and after any
modifications of the send buffer by the MAD layer).

Tested on a non-cache-coherent PowerPC 440SPe system.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-25 10:51:39 -07:00
Sean Hefty 07d357d0cb [IB] CM: bind IDs to a specific device
Bind communication identifiers to a device to support device removal.
Export per HCA CM devices to userspace.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2005-10-17 15:37:43 -07:00
Roland Dreier 91ecd4ae17 [IB] uverbs: Add ABI structures for more commands
Add kernel/user ABI structures for marshalling poll CQ, request CQ
notification, post send, post receive, post SRQ receive, create AH and
destroy AH commands.  These commands allow us to support userspace
verbs for devices that can't perform these operations directly from
userspace (eg the PathScale HCA).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:30 -07:00
Roland Dreier 883a99c702 [IB] uverbs: Add a mask of device methods allowed for userspace
Give each device a uverbs_cmd_mask, so that a low-level driver can
control which methods may be called on behalf of userspace.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:30 -07:00
Roland Dreier 274c089163 [IB] uverbs: Add device-specific ABI version attribute
Add abi_version attribute to uverbs class devices to allow for
ABI versioning of device-specific interfaces.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:26 -07:00
Roland Dreier 6b73597e70 [IB] uverbs: ABI-breaking fixes for userspace verbs
Introduce new userspace verbs ABI version 3.  This eliminates some
unneeded commands, and adds support for user-created completion
channels.  This cleans up problems with file leaks on error paths, and
also makes sure that file descriptors are always installed into the
correct process.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:25 -07:00
Al Viro dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Roland Dreier 63c47c286d [IB] uverbs: Close some exploitable races
Al Viro pointed out that the current IB userspace verbs interface
allows userspace to cause mischief by closing file descriptors before
we're ready, or issuing the same command twice at the same time.  This
patch closes those races, and fixes other obvious problems such as a
module reference leak.

Some other interface bogosities will require an ABI change to fix
properly, so I'm deferring those fixes until 2.6.15.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-26 13:01:03 -07:00
Sean Hefty 972d512a17 [IB] Add MAD data field size definitions
Clean up code by using enums instead of hard-coded magic numbers.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-21 12:31:26 -07:00
John Kingman 354ba39cf9 [PATCH] IB CM: support CM redir
Changes to CM to support CM and port redirection (REJ reason 24).

Signed-off-by: John Kingman <kingman <at> storagegear.com>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-09 18:23:32 -07:00
Roland Dreier 63aaf64752 Make sure that userspace does not retrieve stale asynchronous or
completion events after destroying a CQ, QP or SRQ.  We do this by
sweeping the event lists before returning from a destroy calls, and
then return the number of events already reported before the destroy
call.  This allows userspace wait until it has processed all events
for an object returned from the kernel before it frees its context for
the object.

The ABI of the destroy CQ, destroy QP and destroy SRQ commands has to
change to return the event count, so bump the ABI version from 1 to 2.
The userspace libibverbs library has already been updated to handle
both the old and new ABI versions.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-09 15:55:08 -07:00
Roland Dreier 2e9f7cb786 [PATCH] IB: Add struct for ClassPortInfo
Add structure definition for ClassPortInfo format.  This is
needed for (at least) handling CM redirects.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-09 15:45:57 -07:00
Hal Rosenstock fbed8eee70 [PATCH] IB: Move SA attributes to ib_sa.h
SA: Move SA attributes to ib_sa.h so are accessible to more than
sa_query.c. Also, remove deprecated attributes and add one missing one.

Signed-off-by: Hal Rosenstock <halr@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-09 15:24:04 -07:00
Hal Rosenstock 1325cc7916 [PATCH] IB: Define more SA methods
ib_sa.h: Define more SA methods (initially for madeye decode)

Signed-off-by: Hal Rosenstock <halr@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-09 13:45:51 -07:00
Sean Hefty 0b2b35f681 [PATCH] IB: Add user-supplied context to userspace CM ABI
- Add user specified context to all uCM events.  Users will not retrieve
  any events associated with the context after destroying the corresponding
  cm_id.
- Provide the ib_cm_init_qp_attr() call to userspace clients of the CM.
  This call may be used to set QP attributes properly before modifying the QP.
- Fixes some error handling synchonization and cleanup issues.
- Performs some minor code cleanup.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-07 09:48:52 -07:00
Roland Dreier a4d61e8480 [PATCH] IB: move include files to include/rdma
Move the InfiniBand headers from drivers/infiniband/include to include/rdma.
This allows InfiniBand-using code to live elsewhere, and lets us remove the
ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:38 -07:00