Good to see several new contributors in this set - and more generally a
number of new 'faces' over this whole cycle.
Staging movements
* hmc5843
- out of staging.
* periodic RTC trigger
- driver dropped. This is an ancient driver (brings back some memories ;)
that was always somewhat of a bodge. Originally there was a driver that
never went into mainline that supported large numbers of periodict timers
on the PXA270 via this route. Discussions to have a generic periodic
timer subsystem never went anywhere. At the time RTC periodic
interrupts were real - now they are emulated using high resolution
timers so with the HRT driver this has become pointless.
New device support
* mpu6050 driver
- Add support for the mpu6500.
* TI tpl0102 potentiometer
- new driver.
* Vybrid SoC DAC
- new driver. The ADC on this SoC has been supported for a while, this
adds a separate driver for the DAC.
New Features
* hmc5844
- Attributes to configure the bias current (typically part of a self test)
This could be done before via a somewhat obscure custom interface.
This at least makes it easy to tell what is going on.
- Document all custom attributes.
* mpu6050
- Add support for calibration offset control and readback.
* ms5611
- power regulator support. This is always one that gets added the
first time someone has a board that needs it. Here it was needed,
hence it was added.
Cleanups / minor fixes
* tree wide
- clean up all the myriad different return values in response to a
failure of i2c_check_functionality. After discussions everyone seemed
happy wiht -EOPNOTSUPP which seems to describe the situation well.
I encouraged a tree wide cleanup to set a good example in future for
this.
* core
- Typos in the iio_event_spec documentation in iio.h
* afe4403
- select REGMAP_SPI to avoid dependency issues
- mark suspend/resume as __maybe_unused to avoid warnings
* afe4404
- mark suspend/resume as __maybe_unused to avoid warnings
* atlas-ph-sensor
- switch the regmap cache type from linear to rbtree to gain reading of
registers on initial startup. It's not immediately obvious, but
regmap flat is meant for high performances cases so doesn't read these
registers.
- use regmap_bulk_read in one case where it was using
i2c_smbus_read_i2c_block_data directly (unlike everything else that was
through regmap).
* ina2xx
- stype cleanups (lots of them!)
* isl29018
- Get the struct device back from regmap rather than storing another
copy of it in the private data. This cleanup makes sense in a number
of other drivers so patches may well follow.
* mpu6050
- style cleanups (lots of them!)
- improved return value handling
- use usleep_range to avoid the usual issues with very short msleeps.
- add some missing documentation.
* ms5611
- use the probed device name for the device rather than the driver name.
- select IIO_BUFFER to avoid dependency issues
* palmas
- drop IRQF_EARLY_RESUME as no longer needed after genirq changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=rDIQ
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.6c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third set of IIO new device support, features and cleanups for the 4.6 cycle.
Good to see several new contributors in this set - and more generally a
number of new 'faces' over this whole cycle.
Staging movements
* hmc5843
- out of staging.
* periodic RTC trigger
- driver dropped. This is an ancient driver (brings back some memories ;)
that was always somewhat of a bodge. Originally there was a driver that
never went into mainline that supported large numbers of periodict timers
on the PXA270 via this route. Discussions to have a generic periodic
timer subsystem never went anywhere. At the time RTC periodic
interrupts were real - now they are emulated using high resolution
timers so with the HRT driver this has become pointless.
New device support
* mpu6050 driver
- Add support for the mpu6500.
* TI tpl0102 potentiometer
- new driver.
* Vybrid SoC DAC
- new driver. The ADC on this SoC has been supported for a while, this
adds a separate driver for the DAC.
New Features
* hmc5844
- Attributes to configure the bias current (typically part of a self test)
This could be done before via a somewhat obscure custom interface.
This at least makes it easy to tell what is going on.
- Document all custom attributes.
* mpu6050
- Add support for calibration offset control and readback.
* ms5611
- power regulator support. This is always one that gets added the
first time someone has a board that needs it. Here it was needed,
hence it was added.
Cleanups / minor fixes
* tree wide
- clean up all the myriad different return values in response to a
failure of i2c_check_functionality. After discussions everyone seemed
happy wiht -EOPNOTSUPP which seems to describe the situation well.
I encouraged a tree wide cleanup to set a good example in future for
this.
* core
- Typos in the iio_event_spec documentation in iio.h
* afe4403
- select REGMAP_SPI to avoid dependency issues
- mark suspend/resume as __maybe_unused to avoid warnings
* afe4404
- mark suspend/resume as __maybe_unused to avoid warnings
* atlas-ph-sensor
- switch the regmap cache type from linear to rbtree to gain reading of
registers on initial startup. It's not immediately obvious, but
regmap flat is meant for high performances cases so doesn't read these
registers.
- use regmap_bulk_read in one case where it was using
i2c_smbus_read_i2c_block_data directly (unlike everything else that was
through regmap).
* ina2xx
- stype cleanups (lots of them!)
* isl29018
- Get the struct device back from regmap rather than storing another
copy of it in the private data. This cleanup makes sense in a number
of other drivers so patches may well follow.
* mpu6050
- style cleanups (lots of them!)
- improved return value handling
- use usleep_range to avoid the usual issues with very short msleeps.
- add some missing documentation.
* ms5611
- use the probed device name for the device rather than the driver name.
- select IIO_BUFFER to avoid dependency issues
* palmas
- drop IRQF_EARLY_RESUME as no longer needed after genirq changes.
Pull perf fixes from Thomas Gleixner:
"A rather largish series of 12 patches addressing a maze of race
conditions in the perf core code from Peter Zijlstra"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Robustify task_function_call()
perf: Fix scaling vs. perf_install_in_context()
perf: Fix scaling vs. perf_event_enable()
perf: Fix scaling vs. perf_event_enable_on_exec()
perf: Fix ctx time tracking by introducing EVENT_TIME
perf: Cure event->pending_disable race
perf: Fix race between event install and jump_labels
perf: Fix cloning
perf: Only update context time when active
perf: Allow perf_release() with !event->ctx
perf: Do not double free
perf: Close install vs. exit race
Merge fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
dax: move writeback calls into the filesystems
dax: give DAX clearing code correct bdev
ext4: online defrag not supported with DAX
ext2, ext4: only set S_DAX for regular inodes
block: disable block device DAX by default
ocfs2: unlock inode if deleting inode from orphan fails
mm: ASLR: use get_random_long()
drivers: char: random: add get_random_long()
mm: numa: quickly fail allocations for NUMA balancing on full nodes
mm: thp: fix SMP race condition between THP page fault and MADV_DONTNEED
Previously calls to dax_writeback_mapping_range() for all DAX filesystems
(ext2, ext4 & xfs) were centralized in filemap_write_and_wait_range().
dax_writeback_mapping_range() needs a struct block_device, and it used
to get that from inode->i_sb->s_bdev. This is correct for normal inodes
mounted on ext2, ext4 and XFS filesystems, but is incorrect for DAX raw
block devices and for XFS real-time files.
Instead, call dax_writeback_mapping_range() directly from the filesystem
->writepages function so that it can supply us with a valid block
device. This also fixes DAX code to properly flush caches in response
to sync(2).
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dax_clear_blocks() needs a valid struct block_device and previously it
was using inode->i_sb->s_bdev in all cases. This is correct for normal
inodes on mounted ext2, ext4 and XFS filesystems, but is incorrect for
DAX raw block devices and for XFS real-time devices.
Instead, rename dax_clear_blocks() to dax_clear_sectors(), and change
its arguments to take a bdev and a sector instead of an inode and a
block. This better reflects what the function does, and it allows the
filesystem and raw block device code to pass in an appropriate struct
block_device.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit d07e22597d ("mm: mmap: add new /proc tunable for mmap_base
ASLR") added the ability to choose from a range of values to use for
entropy count in generating the random offset to the mmap_base address.
The maximum value on this range was set to 32 bits for 64-bit x86
systems, but this value could be increased further, requiring more than
the 32 bits of randomness provided by get_random_int(), as is already
possible for arm64. Add a new function: get_random_long() which more
naturally fits with the mmap usage of get_random_int() but operates
exactly the same as get_random_int().
Also, fix the shifting constant in mmap_rnd() to be an unsigned long so
that values greater than 31 bits generate an appropriate mask without
overflow. This is especially important on x86, as its shift instruction
uses a 5-bit mask for the shift operand, which meant that any value for
mmap_rnd_bits over 31 acts as a no-op and effectively disables mmap_base
randomization.
Finally, replace calls to get_random_int() with get_random_long() where
appropriate.
This patch (of 2):
Add get_random_long().
Signed-off-by: Daniel Cashman <dcashman@android.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nick Kralevich <nnk@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Things got calmed down for rc6, as it seems, and we have only a few
HD-audio fixes at this time: a fix for Skylake codec probe errors,
a fix for missing interrupt handling, and a few Dell and HP quirks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=HCiU
-----END PGP SIGNATURE-----
Merge tag 'sound-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Things got calmed down for rc6, as it seems, and we have only a few
HD-audio fixes at this time: a fix for Skylake codec probe errors, a
fix for missing interrupt handling, and a few Dell and HP quirks"
* tag 'sound-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Loop interrupt handling until really cleared
ALSA: hda - Fix headset support and noise on HP EliteBook 755 G2
ALSA: hda - Fixup speaker pass-through control for nid 0x14 on ALC225
ALSA: hda - Fixing background noise on Dell Inspiron 3162
ALSA: hda - Apply clock gate workaround to Skylake, too
Currently the interrupt handler of HD-audio driver assumes that no irq
update is needed while processing the irq. But in reality, it has
been confirmed that the HW irq is issued even during the irq
handling. Since we clear the irq status at the beginning, process the
interrupt, then exits from the handler, the lately issued interrupt is
left untouched without being properly processed.
This patch changes the interrupt handler code to loop over the
check-and-process. The handler tries repeatedly as long as the IRQ
status are turned on, and either stream or CORB/RIRB is handled.
For checking the stream handling, snd_hdac_bus_handle_stream_irq()
returns a value indicating the stream indices bits. Other than that,
the change is only in the irq handler itself.
Reported-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
NFS can ask to encode dentries that are not connected to the root.
The fix check for parent is NULL and encode a file handle accordingly.
Reviewed-on: http://review.whamcloud.com/8347
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4231
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull libnvdimm fixes from Dan Williams:
- Two fixes for compatibility with the ACPI 6.1 specification.
Without these fixes multi-interface DIMMs will fail to be probed, and
address range scrub commands to find memory errors will give results
that the kernel will mis-interpret. For multi-interface DIMMs Linux
will accept either the original 6.0 implementation or 6.1.
For address range scrub we'll only support 6.1 since ACPI formalized
this DSM differently than the original example [1] implemented in
v4.2. The expectation is that production systems will only ever ship
the ACPI 6.1 address range scrub command definition.
- The wider async address range scrub work targeting 4.6 discovered
that the original synchronous implementation in 4.5 is not sizing its
return buffer correctly.
- Arnd caught that my recent fix to the size of the pfn_t flags missed
updating the flags variable used in the pmem driver.
- Toshi found that we mishandle the memremap() return value in
devm_memremap().
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: use 'u64' for pfn flags
devm_memremap: Fix error value when memremap failed
nfit: update address range scrub commands to the acpi 6.1 format
libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing
nfit: fix multi-interface dimm handling, acpi6.1 compatibility
Add a regression fix for changed sysfs path of
bq27xxx_battery and update MAINTAINERS file.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wLVt
-----END PGP SIGNATURE-----
Merge tag 'for-v4.5-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
"Add a regression fix for changed sysfs path of bq27xxx_battery and
update MAINTAINERS file"
* tag 'for-v4.5-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: bq27xxx_battery: Restore device name
MAINTAINERS: update bq27xxx driver
perf_install_in_context() relies upon the context switch hooks to have
scheduled in events when the IPI misses its target -- after all, if
the task has moved from the CPU (or wasn't running at all), it will
have to context switch to run elsewhere.
This however doesn't appear to be happening.
It is possible for the IPI to not happen (task wasn't running) only to
later observe the task running with an inactive context.
The only possible explanation is that the context switch hooks are not
called. Therefore put in a sync_sched() after toggling the jump_label
to guarantee all CPUs will have them enabled before we install an
event.
A simple if (0->1) sync_sched() will not in fact work, because any
further increment can race and complete before the sync_sched().
Therefore we must jump through some hoops.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dvyukov@google.com
Cc: eranian@google.com
Cc: oleg@redhat.com
Cc: panand@redhat.com
Cc: sasha.levin@oracle.com
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20160224174947.980211985@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander reported that when the 'original' context gets destroyed, no
new clones happen.
This can happen irrespective of the ctx switch optimization, any task
can die, even the parent, and we want to continue monitoring the task
hierarchy until we either close the event or no tasks are left in the
hierarchy.
perf_event_init_context() will attempt to pin the 'parent' context
during clone(). At that point current is the parent, and since current
cannot have exited while executing clone(), its context cannot have
passed through perf_event_exit_task_context(). Therefore
perf_pin_task_context() cannot observe ctx->task == TASK_TOMBSTONE.
However, since inherit_event() does:
if (parent_event->parent)
parent_event = parent_event->parent;
it looks at the 'original' event when it does: is_orphaned_event().
This can return true if the context that contains the this event has
passed through perf_event_exit_task_context(). And thus we'll fail to
clone the perf context.
Fix this by adding a new state: STATE_DEAD, which is set by
perf_release() to indicate that the filedesc (or kernel reference) is
dead and there are no observers for our data left.
Only for STATE_DEAD will is_orphaned_event() be true and inhibit
cloning.
STATE_EXIT is otherwise preserved such that is_event_hup() remains
functional and will report when the observed task hierarchy becomes
empty.
Reported-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dvyukov@google.com
Cc: eranian@google.com
Cc: oleg@redhat.com
Cc: panand@redhat.com
Cc: sasha.levin@oracle.com
Cc: vince@deater.net
Fixes: c6e5b73242 ("perf: Synchronously clean up child events")
Link: http://lkml.kernel.org/r/20160224174947.919845295@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The original format of these commands from the "NVDIMM DSM Interface
Example" [1] are superseded by the ACPI 6.1 definition of the "NVDIMM Root
Device _DSMs" [2].
[1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
[2]: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf
"9.20.7 NVDIMM Root Device _DSMs"
Changes include:
1/ New 'restart' fields in ars_status, unfortunately these are
implemented in the middle of the existing definition so this change
is not backwards compatible. The expectation is that shipping
platforms will only ever support the ACPI 6.1 definition.
2/ New status values for ars_start ('busy') and ars_status ('overflow').
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Linda Knippers <linda.knippers@hpe.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable bugfixes:
- Fix nfs_size_to_loff_t
- NFSv4: Fix a dentry leak on alias use
Other bugfixes:
- Don't schedule a layoutreturn if the layout segment can be freed immediately.
- Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode
- rpcrdma_bc_receive_call() should init rq_private_buf.len
- fix stateid handling for the NFS v4.2 operations
- pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page
- fix panic in gss_pipe_downcall() in fips mode
- Fix a race between layoutget and pnfs_destroy_layout
- Fix a race between layoutget and bulk recalls
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWzKShAAoJEGcL54qWCgDyN0QQALiX8v2wvn07vE5ZeXB5uONq
+mfx8avhEoc3NVrpG6F4Kj+yJmHeAbkgIygnhZn4tcM/2YRxGDwlVLHb++yUTHO9
8zEi+tiKx9f5pK2PxRQ0PjavVxO/xOyO0/QNrUdnj8hSNR9ow+YOVjEYUulbuhIg
VAI3oSy5qIKgtDyW7w5PuPpTXLo74hPmyqHaa+ZIr2et//nJMSsw++vAmSg3oqXq
6QkLWPHt/8yvDRRn2hKkbD9gOrFCVfaZIGLM6Q0zRWAcGTzJi94ELzPdm8cVpD1o
eXKcufgLXPt3GOeAmxZ9kwQeebR6IFcvkYom5dsPhtMBuzXu1wpanU8PGgYIQ0VA
88b2YNl+TZpiVbRzxSEellZq5b+zapH/VVVnYptZiq9wUTACc7jK6W2heqe5PzaT
iepTGCAE21tV5JewcITMQHDZiOjRNdtbBzgixI7pNfMN8whU6e5NHYj6psZqT7cf
xEEZzL+RBJuCFKhXSPbBefccA4HCRkDEpT+2QgrMbS4KKfWOg36UNbJ2kgbvcRVi
HTqoRONR6zMzYBhyMlLaUuJ1co8nSHgEsL81Q3MwWSY6gucSW7jeJ2stR20KJIo1
7qgod9Ac/BAIozjzywi0LtmxouPyPU8cqaboMhSRVPDKfFlqZBNBkFLNWwgoYXMa
r1afZQwNeRRbZUR3RulE
=/WDS
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Stable bugfixes:
- Fix nfs_size_to_loff_t
- NFSv4: Fix a dentry leak on alias use
Other bugfixes:
- Don't schedule a layoutreturn if the layout segment can be freed
immediately.
- Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode
- rpcrdma_bc_receive_call() should init rq_private_buf.len
- fix stateid handling for the NFS v4.2 operations
- pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page
- fix panic in gss_pipe_downcall() in fips mode
- Fix a race between layoutget and pnfs_destroy_layout
- Fix a race between layoutget and bulk recalls"
* tag 'nfs-for-4.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4.x/pnfs: Fix a race between layoutget and bulk recalls
NFSv4.x/pnfs: Fix a race between layoutget and pnfs_destroy_layout
auth_gss: fix panic in gss_pipe_downcall() in fips mode
pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page
nfs4: fix stateid handling for the NFS v4.2 operations
NFSv4: Fix a dentry leak on alias use
xprtrdma: rpcrdma_bc_receive_call() should init rq_private_buf.len
pNFS: Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode
pNFS: Fix pnfs_mark_matching_lsegs_return()
nfs: fix nfs_size_to_loff_t
This resolves the merge issues and confusions people were having with
the goldfish drivers due to changes for them showing up in two different
trees.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:
"Looks like a lot, but mostly driver fixes scattered all over as usual.
Of note:
1) Add conditional sched in nf conntrack in cleanup to avoid NMI
watchdogs. From Florian Westphal.
2) Fix deadlock in nfnetlink cttimeout, also from Floarian.
3) Fix handling of slaves in bonding ARP monitor validation, from Jay
Vosburgh.
4) Callers of ip_cmsg_send() are responsible for freeing IP options,
some were not doing so. Fix from Eric Dumazet.
5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT.
6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot.
7) bcm7xxx PHY driver bug fixes from Florian Fainelli.
8) Avoid unaligned accesses to protocol headers wrt. GRE, from
Alexander Duyck.
9) SKB leaks and other problems in arc_emac driver, from Alexander
Kochetkov.
10) tcp_v4_inbound_md5_hash() releases listener socket instead of
request socket on error path, oops. Fix from Eric Dumazet.
11) Missing socket release in pppoe_rcv_core() that seems to have
existed basically forever. From Guillaume Nault.
12) Missing slave_dev unregister in dsa_slave_create() error path,
from Florian Fainelli.
13) crypto_alloc_hash() never returns NULL, fix return value check in
__tcp_alloc_md5sig_pool. From Insu Yun.
14) Properly expire exception route entries in ipv4, from Xin Long.
15) Fix races in tcp/dccp listener socket dismantle, from Eric
Dumazet.
16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not
legal. These drivers modify the SKB on transmit. From Jiri Benc.
17) Fix regression in the initialziation of netdev->tx_queue_len.
From Phil Sutter.
18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun.
19) SCTP port hash sizing does not properly ensure that table is a
power of two in size. From Neil Horman.
20) Fix initializing of software copy of MAC address in fmvj18x_cs
driver, from Ken Kawasaki"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits)
bnx2x: Fix 84833 phy command handler
bnx2x: Fix led setting for 84858 phy.
bnx2x: Correct 84858 PHY fw version
bnx2x: Fix 84833 RX CRC
bnx2x: Fix link-forcing for KR2
net: ethernet: davicom: fix devicetree irq resource
fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address
Driver: Vmxnet3: Update Rx ring 2 max size
net: netcp: rework the code for get/set sw_data in dma desc
soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data
net: ti: netcp: restore get/set_pad_info() functionality
MAINTAINERS: Drop myself as xen netback maintainer
sctp: Fix port hash table size computation
can: ems_usb: Fix possible tx overflow
Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb
net: bcmgenet: Fix internal PHY link state
af_unix: Don't use continue to re-execute unix_stream_read_generic loop
unix_diag: fix incorrect sign extension in unix_lookup_by_ino
bnxt_en: Failure to update PHY is not fatal condition.
bnxt_en: Remove unnecessary call to update PHY settings.
...
Rename the pad to sw_data as per description of this field in the hardware
spec(refer sprugr9 from www.ti.com). Latest version of the document is
at http://www.ti.com/lit/ug/sprugr9h/sprugr9h.pdf and section 3.1
Host Packet Descriptor describes this field.
Define and use a constant for the size of sw_data field similar to
other fields in the struct for desc and document the sw_data field
in the header. As the sw_data is not touched by hw, it's type can be
changed to u32.
Rename the helpers to match with the updated dma desc field sw_data.
Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Grygorii Strashko <grygorii.strashko@ti.com>
CC: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch <703df6c09795> ("power: bq27xxx_battery: Reorganize I2C
into a module") has removed the device name numbering from
bq27xxx_battery_i2c_probe. Fix that by restoring the code.
Fixes: 703df6c097
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
None of the Kconfig currently controlling compilation of any of
the files here are tristate, meaning that none of it currently
is being built as a module by anyone.
We need not be concerned about .remove functions and blocking the
unbind sysfs operations, since that was already done in a recent
commit.
Lets remove any remaining modular references, so that when reading the
drivers there is no doubt they are builtin-only.
All drivers get mostly the same changes, so they are handled in batch.
Changes are (1) convert to builtin_amba_driver, (2) delete module.h
include where unused, and (3) relocate the description into the
comments so we don't need MODULE_DESCRIPTION and associated tags.
The etm3x and etm4x use module_param_named, and have been adjusted
to just include moduleparam.h for that purpose.
In commit f309d44431 ("platform_device:
better support builtin boilerplate avoidance") we introduced the
builtin_driver macro.
Here we use that support and extend it to amba driver registration,
so where a driver is clearly non-modular and builtin-only, we can
update with the simple mapping of
module_amba_driver(...) ---> builtin_amba_driver(...)
Since module_amba_driver() uses the same init level priority as
builtin_amba_driver() the init ordering remains unchanged with
this commit.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TraceID values have to be unique for all tracers and
consistent between drivers and user space. As such
introducing a central function to be used whenever a
traceID value is required.
The patch also account for data traceIDs, which are usually
I(N) + 1.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Perf is a well known and used tool for performance monitoring
and much more. A such it is an ideal candidate for integration
with coresight based HW tracing.
This patch introduces a PMU that represent a coresight tracer to
the Perf core.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding an ETB10 specific AUX area operations to be used
by the perf framework when events are initialised.
Part of this operation involves modeling the mmap'ed area
based on the specific ways a sink buffer gathers information.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding an operation mode to the sink->enable() API in order
to prevent simultaneous access from different callers.
TPIU and TMC won't be supplemented with the AUX area
API immediately and as such ignore the new mode.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
That way traces can be enabled and disabled automatically
from the Perf subystem using the PMU abstraction.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding a new mode to source API enable() in order to
distinguish where the request comes from. That way it is
possible to perform different operations based on where
the request was issued from.
The ETM4x driver is also modified to keep in sync with the
new interface.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using the Coresight framework from the sysFS interface a
tracer is always handling a single session and as such, a path
can be associated with a tracer. But when supporting multiple
session per tracer there is no guarantee that sessions will always
have the same path from source to sink.
This patch is removing the automatic association between path and
tracers. The building of a path and enablement of the components
in the path are decoupled, allowing for the association of a path
with a session rather than a tracer.
To keep backward functionality with the current sysFS access methods
a per-cpu place holder is used to keep a handle on the path built when
tracers are enabled. Lastly APIs to build paths and enable tracers are
made public so that other subsystem can interact with the Coresight
framework.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STM device's unlink callback is never actually called from anywhere in
the stm class code.
This patch adds calls to stm driver's unlink method after the unlinking
has succeeded.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STM drivers provide a callback to generate/send individual STP packets;
it also tells the stm core how many bytes of payload it has consumed.
However, we would also need to use the negative space of this return
value to communicate errors that occur during the packet generation,
in which case the stm core will have to take appropriate action.
For now, we need to account for the possibility that the stm driver may
not support certain combinations of packet type/flags, in which case
it is expected to signal an error.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull x86 fixes from Ingo Molnar:
"This is unusually large, partly due to the EFI fixes that prevent
accidental deletion of EFI variables through efivarfs that may brick
machines. These fixes are somewhat involved to maintain compatibility
with existing install methods and other usage modes, while trying to
turn off the 'rm -rf' bricking vector.
Other fixes are for large page ioremap()s and for non-temporal
user-memcpy()s"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix vmalloc_fault() to handle large pages properly
hpet: Drop stale URLs
x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()
x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable
lib/ucs2_string: Correct ucs2 -> utf8 conversion
efi: Add pstore variables to the deletion whitelist
efi: Make efivarfs entries immutable by default
efi: Make our variable validation list include the guid
efi: Do variable name validation tests in utf8
efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version
lib/ucs2_string: Add ucs2 -> utf8 helper functions
- Fix build error on 32-bit with checkpoint restart from Aneesh Kumar
- Fix dedotify for binutils >= 2.26 from Andreas Schwab
- Don't trace hcalls on offline CPUs from Denis Kirjanov
- eeh: Fix stale cached primary bus from Gavin Shan
- eeh: Fix stale PE primary bus from Gavin Shan
- mm: Fix Multi hit ERAT cause by recent THP update from Aneesh Kumar K.V
- ioda: Set "read" permission when "write" is set from Alexey Kardashevskiy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7Yzi
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix build error on 32-bit with checkpoint restart from Aneesh Kumar
- Fix dedotify for binutils >= 2.26 from Andreas Schwab
- Don't trace hcalls on offline CPUs from Denis Kirjanov
- eeh: Fix stale cached primary bus from Gavin Shan
- eeh: Fix stale PE primary bus from Gavin Shan
- mm: Fix Multi hit ERAT cause by recent THP update from Aneesh Kumar K.V
- ioda: Set "read" permission when "write" is set from Alexey Kardashevskiy
* tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ioda: Set "read" permission when "write" is set
powerpc/mm: Fix Multi hit ERAT cause by recent THP update
powerpc/powernv: Fix stale PE primary bus
powerpc/eeh: Fix stale cached primary bus
powerpc/pseries: Don't trace hcalls on offline CPUs
powerpc: Fix dedotify for binutils >= 2.26
powerpc/book3s_32: Fix build error with checkpoint restart
fallout from adding Tegra210 and rockchip rk3036/rk3368 drivers
this cycle. There's also the random smattering of sparse/checker
fixes, a build "fix" to get the Tango clk driver to compile
because the Kconfig symbol was renamed after the fact, and a clk
gpio fix for a patch mismerge.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=I6OK
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
"An assortment of vendor specific clk drivers fixes, most notably
fallout from adding Tegra210 and rockchip rk3036/rk3368 drivers this
cycle.
There's also the random smattering of sparse/checker fixes, a build
"fix" to get the Tango clk driver to compile because the Kconfig
symbol was renamed after the fact, and a clk gpio fix for a patch
mismerge"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (28 commits)
clk: gpio: Really allow an optional clock= DT property
Revert "clk: qcom: Specify LE device endianness"
clk: versatile: mask VCO bits before writing
clk: tegra: super: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warning for pll_m
clk: tegra: Use definition for pll_u override bit
clk: tegra: Fix warning caused by pll_u failing to lock
clk: tegra: Fix clock sources for Tegra210 EMC
clk: tegra: Add the APB2APE audio clock on Tegra210
clk: tegra: Add missing of_node_put()
clk: tegra: Fix PLLE SS coefficients
clk: tegra: Fix typos around clearing PLLE bits during enable
clk: tegra: Do not disable PLLE when under hardware control
clk: tegra: Fix pllx dyn step calculation
clk: tegra: pll: Fix potential sleeping-while-atomic
clk: tegra: Fix the misnaming of nvenc from msenc
clk: tegra: Fix naming of MISC registers
clk: tango4: rename ARCH_TANGOX to ARCH_TANGO
clk: scpi: Fix checking return value of platform_device_register_simple()
...
Pull more drm fixes from Dave Airlie:
"Some more fixes trickled in:
A bunch of VC4 ones since it's a pretty new driver not much chance of
regressions, and it fixes GPU resets.
Also one atomic fix, one set of fixes for a common bug in TTM cleanup,
and one i915 hotplug fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: use post-decrement in error handling
drm/atomic: Allow for holes in connector state, v2.
drm/i915: Fix hpd live status bits for g4x
drm/vc4: Use runtime PM to power cycle the device when the GPU hangs.
drm/vc4: Enable runtime PM.
drm/vc4: Fix spurious GPU resets due to BO reuse.
drm/vc4: Drop error message on seqno wait timeouts.
drm/vc4: Fix -ERESTARTSYS error return from BO waits.
drm/vc4: Return an ERR_PTR from BO creation instead of NULL.
drm/vc4: Fix the clear color for the first tile rendered.
drm/vc4: Validate that WAIT_BO padding is cleared.
drm/radeon: use post-decrement in error handling
drm/amdgpu: use post-decrement in error handling
Use the output length specified in the command to size the receive
buffer rather than the arbitrary 4K limit.
This bug was hiding the fact that the ndctl implementation of
ndctl_bus_cmd_new_ars_status() was not specifying an output buffer size.
Cc: <stable@vger.kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: slab: free kmem_cache_node after destroy sysfs file
ipc/shm: handle removed segments gracefully in shm_mmap()
MAINTAINERS: update Kselftest Framework mailing list
devm_memremap_release(): fix memremap'd addr handling
mm/hugetlb.c: fix incorrect proc nr_hugepages value
mm, x86: fix pte_page() crash in gup_pte_range()
fsnotify: turn fsnotify reaper thread into a workqueue job
Revert "fsnotify: destroy marks with call_srcu instead of dedicated thread"
mm: fix regression in remap_file_pages() emulation
thp, dax: do not try to withdraw pgtable from non-anon VMA
Because we record connector_mask using 1 << drm_connector_index now
the connector_mask should stay the same even when other connectors
are removed. This was not the case with MST, in that case when removing
a connector all other connectors may change their index.
This is fixed by waiting until the first get_connector_state to allocate
connector_state, and force reallocation when state is too small.
As a side effect connector arrays no longer have to be preallocated,
and can be allocated on first use which means a less allocations in
the page flip only path.
Changes since v1:
- Whitespace. (Ville)
- Call ida_remove when destroying the connector. (Ville)
- u32 alloc -> int. (Ville)
Fixes: 14de6c44d1 ("drm/atomic: Remove drm_atomic_connectors_for_crtc.")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull livepatching fixes from Jiri Kosina:
- regression (from 4.4) fix for ordering issue, introduced by an
earlier ftrace change, that broke live patching of modules.
The fix replaces the ftrace module notifier by direct call in order
to make the ordering guaranteed and well-defined. The patch, from
Jessica Yu, has been acked both by Steven and Rusty
- error message fix from Miroslav Benes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
ftrace/module: remove ftrace module notifier
livepatch: change the error message in asm/livepatch.h header files
This reverts commit c510eff6be ("fsnotify: destroy marks with
call_srcu instead of dedicated thread").
Eryu reported that he was seeing some OOM kills kick in when running a
testcase that adds and removes inotify marks on a file in a tight loop.
The above commit changed the code to use call_srcu to clean up the
marks. While that does (in principle) work, the srcu callback job is
limited to cleaning up entries in small batches and only once per jiffy.
It's easily possible to overwhelm that machinery with too many call_srcu
callbacks, and Eryu's reproduer did just that.
There's also another potential problem with using call_srcu here. While
you can obviously sleep while holding the srcu_read_lock, the callbacks
run under local_bh_disable, so you can't sleep there.
It's possible when putting the last reference to the fsnotify_mark that
we'll end up putting a chain of references including the fsnotify_group,
uid, and associated keys. While I don't see any obvious ways that that
could occurs, it's probably still best to avoid using call_srcu here
after all.
This patch reverts the above patch. A later patch will take a different
approach to eliminated the dedicated thread here.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reported-by: Eryu Guan <guaneryu@gmail.com>
Tested-by: Eryu Guan <guaneryu@gmail.com>
Cc: Jan Kara <jack@suse.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ilya reported following lockdep splat:
kernel: =========================
kernel: [ BUG: held lock freed! ]
kernel: 4.5.0-rc1-ceph-00026-g5e0a311 #1 Not tainted
kernel: -------------------------
kernel: swapper/5/0 is freeing memory
ffff880035c9d200-ffff880035c9dbff, with a lock still held there!
kernel: (&(&queue->rskq_lock)->rlock){+.-...}, at:
[<ffffffff816f6a88>] inet_csk_reqsk_queue_add+0x28/0xa0
kernel: 4 locks held by swapper/5/0:
kernel: #0: (rcu_read_lock){......}, at: [<ffffffff8169ef6b>]
netif_receive_skb_internal+0x4b/0x1f0
kernel: #1: (rcu_read_lock){......}, at: [<ffffffff816e977f>]
ip_local_deliver_finish+0x3f/0x380
kernel: #2: (slock-AF_INET){+.-...}, at: [<ffffffff81685ffb>]
sk_clone_lock+0x19b/0x440
kernel: #3: (&(&queue->rskq_lock)->rlock){+.-...}, at:
[<ffffffff816f6a88>] inet_csk_reqsk_queue_add+0x28/0xa0
To properly fix this issue, inet_csk_reqsk_queue_add() needs
to return to its callers if the child as been queued
into accept queue.
We also need to make sure listener is still there before
calling sk->sk_data_ready(), by holding a reference on it,
since the reference carried by the child can disappear as
soon as the child is put on accept queue.
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Fixes: ebb516af60 ("tcp/dccp: fix race at listener dismantle phase")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the gc of ipv4 route was removed, the route cached would has
no chance to be removed, and even it has been timeout, it still could
be used, cause no code to check it's expires.
Fix this issue by checking and removing route cache when we get route.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert 811a4e6fce ("PCI: Add helpers to manage pci_dev->irq and
pci_dev->irq_managed").
This is part of reverting 991de2e590 ("PCI, x86: Implement
pcibios_alloc_irq() and pcibios_free_irq()") to fix regressions it
introduced.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211
Fixes: 991de2e590 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
CC: Jiang Liu <jiang.liu@linux.intel.com>
Remove the ftrace module notifier in favor of directly calling
ftrace_module_enable() and ftrace_release_mod() in the module loader.
Hard-coding the function calls directly in the module loader removes
dependence on the module notifier call chain and provides better
visibility and control over what gets called when, which is important
to kernel utilities such as livepatch.
This fixes a notifier ordering issue in which the ftrace module notifier
(and hence ftrace_module_enable()) for coming modules was being called
after klp_module_notify(), which caused livepatch modules to initialize
incorrectly. This patch removes dependence on the module notifier call
chain in favor of hard coding the corresponding function calls in the
module loader. This ensures that ftrace and livepatch code get called in
the correct order on patch module load and unload.
Fixes: 5156dca34a ("ftrace: Fix the race between ftrace and insmod")
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fixes a few minor typos in the documentation comments for the
scan_type member of the iio_event_spec structure. The sign member name
was improperly capitalized as "Sign" in the comments. The storagebits
member name was improperly listed as "storage_bits" in the comments. The
endianness member entry in the comments was moved after the repeat
member entry in order to maintain consistency with the actual struct
iio_event_spec layout.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Pull block fixes from Jens Axboe:
"A collection of fixes from the past few weeks that should go into 4.5.
This contains:
- Overflow fix for sysfs discard show function from Alan.
- A stacking limit init fix for max_dev_sectors, so we don't end up
artificially capping some use cases. From Keith.
- Have blk-mq proper end unstarted requests on a dying queue, instead
of pushing that to the driver. From Keith.
- NVMe:
- Update to Kconfig description for NVME_SCSI, since it was
vague and having it on is important for some SUSE distros.
From Christoph.
- Set of fixes from Keith, around surprise removal. Also kills
the no-merge flag, so it supports merging.
- Set of fixes for lightnvm from Matias, Javier, and Wenwei.
- Fix null_blk oops when asked for lightnvm, but not available. From
Matias.
- Copy-to-user EINTR fix from Hannes, fixing a case where SG_IO fails
if interrupted by a signal.
- Two floppy fixes from Jiri, fixing signal handling and blocking
open.
- A use-after-free fix for O_DIRECT, from Mike Krinkin.
- A block module ref count fix from Roman Pen.
- An fs IO wait accounting fix for O_DSYNC from Stephane Gasparini.
- Smaller reallo fix for xen-blkfront from Bob Liu.
- Removal of an unused struct member in the deadline IO scheduler,
from Tahsin.
- Also from Tahsin, properly initialize inode struct members
associated with cgroup writeback, if enabled.
- From Tejun, ensure that we keep the superblock pinned during cgroup
writeback"
* 'for-linus' of git://git.kernel.dk/linux-block: (25 commits)
blk: fix overflow in queue_discard_max_hw_show
writeback: initialize inode members that track writeback history
writeback: keep superblock pinned during cgroup writeback association switches
bio: return EINTR if copying to user space got interrupted
NVMe: Rate limit nvme IO warnings
NVMe: Poll device while still active during remove
NVMe: Requeue requests on suspended queues
NVMe: Allow request merges
NVMe: Fix io incapable return values
blk-mq: End unstarted requests on dying queue
block: Initialize max_dev_sectors to 0
null_blk: oops when initializing without lightnvm
block: fix module reference leak on put_disk() call for cgroups throttle
nvme: fix Kconfig description for BLK_DEV_NVME_SCSI
kernel/fs: fix I/O wait not accounted for RW O_DSYNC
floppy: refactor open() flags handling
lightnvm: allow to force mm initialization
lightnvm: check overflow and correct mlc pairs
lightnvm: fix request intersection locking in rrpc
lightnvm: warn if irqs are disabled in lock laddr
...
The first is something that has come up a few times and has been
worked out individually, but it's come up now enough that the problem
should be generic. Tracepoints are protected by RCU sched. There are
several tracepoints within core infrastructure like kfree().
If a tracepoint is called when the CPU is going down, or when it's
coming up but has yet to be recognized by RCU, a RCU warning is
triggered. This is a true bug as that tracepoint is not protected by
RCU. Usually, this is taken care of by testing for cpu online as
a tracepoint condition. But as this is happening more often, moving
it from a individual tracepoint to a check in the tracepoint infrastructure
is more robust.
Note, there is now a duplicate of a cpu online test, because this update
does not remove the individual checks. But the overhead is small enough
that the removal can be done in another release.
The second change is strange linker breakage due to the branch tracer's
builtin_constant_p() check failing, and treating the condition as a
variable instead of a constant. Arnd Bergmann found that this can be
fixed by testing !!(cond) instead of just (cond).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWw2vTAAoJEKKk/i67LK/8vkMIAI+Fx+S9sCeWVGp4VZ3DKH9K
DibRD/2KREZe1AjYEU8ZAgo+VsFzW8OHiI1TI/1jP61YkiQSIhu6kVdPCoLG5buy
8WwiKEQ94VWC1hbPOiiq3K7THEu+M8zuFdU3+odS8E3sXIGqKPKQ3iFwwfTVHI6o
/cMTuefqsxo/hj8VwwaZdwlgWwLltM8sR040auTTEsqBLZ7D1q0aCyBrnju3FtBt
uSIPK91d92ANkpq3ELDihxBa41XSEahYgGm/ozewjHwpooWvIQz4tpGaxxkyltuE
RzeYBrM5LNBQUaXZ6C6jAdL0Y+bukS2MdNUjv8U6LwKbUvQoLuYteGEQ9g/m+mE=
=8LDX
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This includes two fixes.
The first is something that has come up a few times and has been
worked out individually, but it's come up now enough that the problem
should be generic. Tracepoints are protected by RCU sched. There are
several tracepoints within core infrastructure like kfree(). If a
tracepoint is called when the CPU is going down, or when it's coming
up but has yet to be recognized by RCU, a RCU warning is triggered.
This is a true bug as that tracepoint is not protected by RCU.
Usually, this is taken care of by testing for cpu online as a
tracepoint condition. But as this is happening more often, moving it
from a individual tracepoint to a check in the tracepoint
infrastructure is more robust.
Note, there is now a duplicate of a cpu online test, because this
update does not remove the individual checks. But the overhead is
small enough that the removal can be done in another release.
The second change is strange linker breakage due to the branch
tracer's builtin_constant_p() check failing, and treating the
condition as a variable instead of a constant. Arnd Bergmann found
that this can be fixed by testing !!(cond) instead of just (cond)"
* tag 'trace-fixes-v4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix freak link error caused by branch tracer
tracepoints: Do not trace when cpu is offline
problem description:
The current code sets UAR page size equal to system page size.
The ConnectX-3 and ConnectX-3 Pro HWs require minimum 128 UAR pages.
The mlx4 kernel drivers are not loaded if there is less than 128 UAR pages.
solution:
Always set UAR page to 4KB. This allows more UAR pages if the OS
has PAGE_SIZE larger than 4KB. For example, PowerPC kernel use 64KB
system page size, with 4MB uar region, there are 4MB/2/64KB = 32
uars (half for uar, half for blueflame). This does not meet minimum 128
UAR pages requirement. With 4KB UAR page, there are 4MB/2/4KB = 512 uars
which meet the minimum requirement.
Note that only codes in mlx4_core that deal with firmware know that uar
page size is 4KB. Codes that deal with usr page in cq and qp context
(mlx4_ib, mlx4_en and part of mlx4_core) still have the same assumption
that uar page size equals to system page size.
Note that with this implementation, on 64KB system page size kernel, there
are 16 uars per system page but only one uars is used. The other 15
uars are ignored because of the above assumption.
Regarding SR-IOV, mlx4_core in hypervisor will set the uar page size
to 4KB and mlx4_core code in virtual OS will obtain the uar page size from
firmware.
Regarding backward compatibility in SR-IOV, if hypervisor has this new code,
the virtual OS must be updated. If hypervisor has old code, and the virtual
OS has this new code, the new code will be backward compatible with the
old code. If the uar size is big enough, this new code in VF continues to
work with 64 KB uar page size (on PowerPc kernel). If the uar size does not
meet 128 uars requirement, this new code not loaded in VF and print the same
error message as the old code in Hypervisor.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman