As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Perf's BPF prologue generator unconditionally fetches 8 bytes for
function parameters, which causes problems on big endian machines. Thomas
gives a detailed analysis for this problem:
http://lkml.kernel.org/r/968ebda5-abe4-8830-8d69-49f62529d151@linux.vnet.ibm.com
---- 8< ----
I investigated perf test BPF for s390x and have a question regarding
the 38.3 subtest (bpf-prologue test) which fails on s390x.
When I turn on trace_printk in tests/bpf-script-test-prologue.c
I see this output in /sys/kernel/debug/tracing/trace:
[root@s8360047 perf]# cat /sys/kernel/debug/tracing/trace
perf-30229 [000] d..2 170161.535791: : f_mode 2001d00000000 offset:0 orig:0
perf-30229 [000] d..2 170161.535809: : f_mode 6001f00000000 offset:0 orig:0
perf-30229 [000] d..2 170161.535815: : f_mode 6001f00000000 offset:1 orig:0
perf-30229 [000] d..2 170161.535819: : f_mode 2001d00000000 offset:1 orig:0
perf-30229 [000] d..2 170161.535822: : f_mode 2001d00000000 offset:2 orig:1
perf-30229 [000] d..2 170161.535825: : f_mode 6001f00000000 offset:2 orig:1
perf-30229 [000] d..2 170161.535828: : f_mode 6001f00000000 offset:3 orig:1
perf-30229 [000] d..2 170161.535832: : f_mode 2001d00000000 offset:3 orig:1
perf-30229 [000] d..2 170161.535835: : f_mode 2001d00000000 offset:4 orig:0
perf-30229 [000] d..2 170161.535841: : f_mode 6001f00000000 offset:4 orig:0
[...]
There are 3 parameters the eBPF program tests/bpf-script-test-prologue.c
accesses: f_mode (member of struct file at offset 140) offset and orig. They
are parameters of the lseek() system call triggered in this test case in
function llseek_loop().
What is really strange is the value of f_mode. It is an 8 byte value, whereas
in the probe event it is defined as a 4 byte value. The lower 4 bytes are all
zero and do not belong to member f_mode. The correct value should be 2001d for
read-only and 6001f for read-write open mode.
Here is the output of the 'perf test -vv bpf' trace:
Try to find probe point from debuginfo.
Matched function: null_lseek [2d9310d]
Probe point found: null_lseek+0
Searching 'file' variable in context.
Converting variable file into trace event.
converting f_mode in file
f_mode type is unsigned int.
Opening /sys/kernel/debug/tracing//README write=0
Searching 'offset' variable in context.
Converting variable offset into trace event.
offset type is long long int.
Searching 'orig' variable in context.
Converting variable orig into trace event.
orig type is int.
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: p:perf_bpf_probe/func _text+8794224 f_mode=+140(%r2):x32
---- 8< ----
This patch parses the type of each argument and converts data from memory to
expected type.
Now the test runs successfully on 4.13.0-rc5:
[root@s8360046 perf]# ./perf test bpf
38: BPF filter :
38.1: Basic BPF filtering : Ok
38.2: BPF pinning : Ok
38.3: BPF prologue generation : Ok
38.4: BPF relocation checker : Ok
[root@s8360046 perf]#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170815092159.31912-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch generates a prologue for a BPF program which fetches arguments for
it. With this patch, the program can have arguments as follow:
SEC("lock_page=__lock_page page->flags")
int lock_page(struct pt_regs *ctx, int err, unsigned long flags)
{
return 1;
}
This patch passes at most 3 arguments from r3, r4 and r5. r1 is still the ctx
pointer. r2 is used to indicate if dereferencing was done successfully.
This patch uses r6 to hold ctx (struct pt_regs) and r7 to hold stack pointer
for result. Result of each arguments first store on stack:
low address
BPF_REG_FP - 24 ARG3
BPF_REG_FP - 16 ARG2
BPF_REG_FP - 8 ARG1
BPF_REG_FP
high address
Then loaded into r3, r4 and r5.
The output prologue for offn(...off2(off1(reg)))) should be:
r6 <- r1 // save ctx into a callee saved register
r7 <- fp
r7 <- r7 - stack_offset // pointer to result slot
/* load r3 with the offset in pt_regs of 'reg' */
(r7) <- r3 // make slot valid
r3 <- r3 + off1 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7 // result put onto stack
call probe_read // read unsafe pointer
jnei r0, 0, err // error checking
r3 <- (r7) // read result
r3 <- r3 + off2 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7
call probe_read
jnei r0, 0, err
...
/* load r2, r3, r4 from stack */
goto success
err:
r2 <- 1
/* load r3, r4, r5 with 0 */
goto usercode
success:
r2 <- 0
usercode:
r1 <- r6 // restore ctx
// original user code
If all of arguments reside in register (dereferencing is not
required), gen_prologue_fastpath() will be used to create
fast prologue:
r3 <- (r1 + offset of reg1)
r4 <- (r1 + offset of reg2)
r5 <- (r1 + offset of reg3)
r2 <- 0
P.S.
eBPF calling convention is defined as:
* r0 - return value from in-kernel function, and exit value
for eBPF program
* r1 - r5 - arguments from eBPF program to in-kernel function
* r6 - r9 - callee saved registers that in-kernel function will
preserve
* r10 - read-only frame pointer to access stack
Committer note:
At least testing if it builds and loads:
# cat test_probe_arg.c
struct pt_regs;
__attribute__((section("lock_page=__lock_page page->flags"), used))
int func(struct pt_regs *ctx, int err, unsigned long flags)
{
return 1;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
# perf record -e ./test_probe_arg.c usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
# perf evlist
perf_bpf_probe:lock_page
#
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mauro Carvalho Chehab