Commit Graph

339 Commits

Author SHA1 Message Date
Ricardo Ribalda f90580ca01 [media] videodev2: Set vb2_rect's width and height as unsigned
As discussed on the media summit 2013, there is no reason for the width
and height to be signed.

Therefore this patch is an attempt to convert those fields from __s32 to
__u32.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi> (documentation and smiapp)
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 08:02:39 -02:00
Hans Verkuil 581d88c470 [media] saa7134: don't set vfd->debug
You can set this through sysfs, so don't mix the two.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 08:00:17 -02:00
Hans Verkuil 09092787e0 [media] saa6588: add support for non-blocking mode
saa6588 always blocked while waiting for data, even if the filehandle
was in non-blocking mode.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:42:19 -02:00
Hans Verkuil a9fe3beee6 [media] saa7134: drop log_status for radio
There are no controls for the radio node, so just drop support for this ioctl.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:39:45 -02:00
Hans Verkuil 8c7c2ddcce [media] saa6752hs.h: drop empty header
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:39:31 -02:00
Hans Verkuil 6052ba3520 [media] saa6752hs: move to media/i2c
This driver is independent from saa7134, so there is no reason why this
shouldn't be in media/i2c like all other i2c media drivers.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:39:17 -02:00
Hans Verkuil d8100f4498 [media] saa6752hs: drop compat control code
The saa7134 driver is now converted to the control framework, so drop the
control compat code in saa6752hs.c.

Also add 'const' to several static arrays.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:38:32 -02:00
Hans Verkuil 95075dd01e [media] saa7134: use V4L2_IN_ST_NO_SIGNAL instead of NO_SYNC
NO_SYNC was meant for DVB and shouldn't be used anymore.

In this case NO_SIGNAL is a good alternative.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:38:13 -02:00
Hans Verkuil a200450291 [media] saa7134: add support for control events
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:37:39 -02:00
Hans Verkuil ce791139ec [media] saa7134: share resource management between normal and empress nodes
The empress video node can share resource management with the normal
video nodes, thus allowing for code sharing and making the empress node
non-exclusive.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:37:10 -02:00
Hans Verkuil b9f63b2595 [media] saa7134: remove dev from saa7134_fh, use saa7134_fh for empress node
Use the saa7134_fh struct for the empress video node as well, drop the dev
pointer from that struct since we can use drvdata for that.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:36:21 -02:00
Hans Verkuil b93a18d560 [media] saa7134: cleanup radio/video/empress ioctl handling
The video and empress nodes can share various ioctls.

Drop the input/std ioctls from the radio node (out of spec).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:18:41 -02:00
Hans Verkuil 718bde1aa9 [media] saa7134: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:17:12 -02:00
Hans Verkuil 9db0fb182e [media] saa7134: move the queue data from saa7134_fh to saa7134_dev
These fields are global, not per-filehandle.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 07:16:07 -02:00
Mauro Carvalho Chehab 675722b0e3 Merge branch 'upstream-fixes' into patchwork
Merge the media fixes merged upstream for v3.13-rc4

* upstream-fixes: (30 commits)
  [media] videobuf2-dma-sg: fix possible memory leak
  [media] vb2: regression fix: always set length field.
  [media] mt9p031: Include linux/of.h header
  [media] rtl2830: add parent for I2C adapter
  [media] media: marvell-ccic: use devm to release clk
  [media] ths7303: Declare as static a private function
  [media] em28xx-video: Swap release order to avoid lock nesting
  [media] usbtv: Add support for PAL video source
  [media] media_tree: Fix spelling errors
  [media] videobuf2: Add support for file access mode flags for DMABUF exporting
  [media] radio-shark2: Mark shark_resume_leds() inline to kill compiler warning
  [media] radio-shark: Mark shark_resume_leds() inline to kill compiler warning
  [media] af9035: unlock on error in af9035_i2c_master_xfer()
  [media] af9033: fix broken I2C
  [media] v4l: omap3isp: Don't check for missing get_fmt op on remote subdev
  [media] af9035: fix broken I2C and USB I/O
  [media] wm8775: fix broken audio routing
  [media] marvell-ccic: drop resource free in driver remove
  [media] tef6862/radio-tea5764: actually assign clamp result
  [media] cx231xx: use after free on error path in probe
  ...
2013-12-13 05:04:00 -02:00
Jingoo Han f1b84d365a [media] media: pci: remove DEFINE_PCI_DEVICE_TABLE macro
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-10 16:39:25 -02:00
Dan Carpenter e351bf25fa [media] cx18: check for allocation failure in cx18_read_eeprom()
It upsets static checkers when we don't check for allocation failure.  I
moved the memset() of "tv" earlier so we don't use uninitialized data on
error.
Fixes: 1d212cf0c2 ('[media] cx18: struct i2c_client is too big for stack')

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-10 15:36:11 -02:00
Wei Yongjun cd86e3b535 [media] cx88: use correct pci drvdata type in cx88_audio_finidev()
We had set the pci drvdata in cx88_audio_initdev() as a type of
struct snd_card, so cx88_audio_finidev() should used it as the
same type too.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-10 15:28:59 -02:00
Jonathan McCrohan f58c91ce82 [media] media_tree: Fix spelling errors
Fix various spelling errors in strings and comments throughout the media
tree. The majority of these were found using Lucas De Marchi's codespell
tool.

[m.chehab@samsung.com: discard hunks with conflicts]

Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-09 14:50:50 -02:00
Jonathan McCrohan 39c1cb2b19 [media] media_tree: Fix spelling errors
Fix various spelling errors in strings and comments throughout the media
tree. The majority of these were found using Lucas De Marchi's codespell
tool.

[m.chehab@samsung.com: discard hunks with conflicts]

Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29 14:43:50 -02:00
Wei Yongjun 89f4d45b27 [media] saa7164: fix return value check in saa7164_initdev()
In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29 14:20:06 -02:00
Hans Verkuil f8e1b699a5 [media] bttv: don't setup the controls if there are no video devices
The no_video flag was checked in all other cases except one. Calling
v4l2_ctrl_handler_setup() if no_video is 1 will crash.
This wasn't noticed before since there are only two card types that
set no_video to 1, so this type of hardware is quite rare.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Lorenz Röhrl <sheepshit@gmx.de>
Tested-by: Lorenz Röhrl <sheepshit@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29 14:18:33 -02:00
Linus Torvalds 3ea369eea0 Merge branch 'topic/kbuild-fixes-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media build fixes from Mauro Carvalho Chehab:
 "A series of patches that fix compilation on non-x86 archs.

  While most of them are just build fixes, there are some fixes for real
  bugs, as there are a number of drivers using dynamic stack allocation.
  A few of those might be considered a security risk, if the i2c-dev
  module is loaded, as someone could be sending very long I2C data that
  could potentially overflow the Kernel stack.  Ok, as using /dev/i2c-*
  devnodes usually requires root on usual distros, and exploiting it
  would require a DVB board or USB stick, the risk is not high"

* 'topic/kbuild-fixes-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (28 commits)
  [media] platform drivers: Fix build on frv arch
  [media] lirc_zilog: Don't use dynamic static allocation
  [media] mxl111sf: Don't use dynamic static allocation
  [media] af9035: Don't use dynamic static allocation
  [media] af9015: Don't use dynamic static allocation
  [media] dw2102: Don't use dynamic static allocation
  [media] dibusb-common: Don't use dynamic static allocation
  [media] cxusb: Don't use dynamic static allocation
  [media] v4l2-async: Don't use dynamic static allocation
  [media] cimax2: Don't use dynamic static allocation
  [media] tuner-xc2028: Don't use dynamic static allocation
  [media] tuners: Don't use dynamic static allocation
  [media] av7110_hw: Don't use dynamic static allocation
  [media] stv090x: Don't use dynamic static allocation
  [media] stv0367: Don't use dynamic static allocation
  [media] stb0899_drv: Don't use dynamic static allocation
  [media] dvb-frontends: Don't use dynamic static allocation
  [media] dvb-frontends: Don't use dynamic static allocation
  [media] s5h1420: Don't use dynamic static allocation
  [media] uvc/lirc_serial: Fix some warnings on parisc arch
  ...
2013-11-18 15:10:05 -08:00
Linus Torvalds a310410f61 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 "This series include:
   - a new Remote Controller driver for ST SoC with the corresponding DT
     bindings
   - a new frontend (cx24117)
   - a new I2C camera flash driver (lm3560)
   - a new mem2mem driver for TI SoC (ti-vpe)
   - support for Raphael r828d added to r820t driver
   - some improvements on buffer allocation at VB2 core
   - usual driver fixes and improvements

  PS this time, we have a smaller number of patches.  While it is hard
  to pinpoint to the reasons, I believe that it is mainly due to:

   1) there are several patch series ready, but depending on DT review.
      I decided to grant some extra time for DT maintainers to look on
      it, as they're expecting to have more time with the changes agreed
      during ARM mini-summit and KS.  If they can't review in time for
      3.14, I'll review myself and apply for the next merge window.

   2) I suspect that having both LinuxCon EU and LinuxCon NA happening
      during the same merge window affected the development
      productivity, as several core media developers participated on
      both events"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (151 commits)
  [media] media: st-rc: Add ST remote control driver
  [media] gpio-ir-recv: Include linux/of.h header
  [media] tvp7002: Include linux/of.h header
  [media] tvp514x: Include linux/of.h header
  [media] ths8200: Include linux/of.h header
  [media] adv7343: Include linux/of.h header
  [media] v4l: Fix typo in v4l2_subdev_get_try_crop()
  [media] media: i2c: add driver for dual LED Flash, lm3560
  [media] rtl28xxu: add 15f4:0131 Astrometa DVB-T2
  [media] rtl28xxu: add RTL2832P + R828D support
  [media] rtl2832: add new tuner R828D
  [media] r820t: add support for R828D
  [media] media/i2c: ths8200: fix build failure with gcc 4.5.4
  [media] Add support for KWorld UB435-Q V2
  [media] staging/media: fix msi3101 build errors
  [media] ddbridge: Remove casting the return value which is a void pointer
  [media] ngene: Remove casting the return value which is a void pointer
  [media] dm1105: remove unneeded not-null test
  [media] sh_mobile_ceu_camera: remove deprecated IRQF_DISABLED
  [media] media: rcar_vin: Add preliminary r8a7790 support
  ...
2013-11-18 15:08:02 -08:00
Mauro Carvalho Chehab 278ba83a3a [media] cimax2: Don't use dynamic static allocation
Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
        drivers/media/pci/cx23885/cimax2.c:149:1: warning: 'netup_write_i2c' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer. Considering that I2C
transfers are generally limited, and that devices used on USB has a
max data length of 64 bytes for the control URBs.
So, it seem safe to use 64 bytes as the hard limit for all those devices.
On most cases, the limit is a way lower than that, but this limit
is small enough to not affect the Kernel stack, and it is a no brain
limit, as using smaller ones would require to either carefully each
driver or to take a look on each datasheet.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-08 09:45:42 -02:00
Mauro Carvalho Chehab 5bf30b3bc4 [media] av7110_hw: Don't use dynamic static allocation
Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
	drivers/media/pci/ttpci/av7110_hw.c:510:1: warning: 'av7110_fw_cmd' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer.
In the specific case of this driver, the maximum fw command size
is 6 + 2, as checked using:
	$ git grep -A1 av7110_fw_cmd drivers/media/pci/ttpci/
So, use 8 for the buffer size.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-08 09:45:41 -02:00
Mauro Carvalho Chehab 1d212cf0c2 [media] cx18: struct i2c_client is too big for stack
drivers/media/pci/cx18/cx18-driver.c: In function 'cx18_read_eeprom':
	drivers/media/pci/cx18/cx18-driver.c:357:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=]
That happens because the routine allocates 256 bytes for an eeprom buffer, plus
the size of struct i2c_client, with is big.
Change the logic to dynamically allocate/deallocate space for struct i2c_client,
instead of  using the stack.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-07 15:04:00 -02:00
Mauro Carvalho Chehab 51d8e7fbff [media] zoran: don't build it on alpha
This driver uses virt_to_bus() with is deprecated on Alpha:
	drivers/media/pci/zoran/zoran_device.c: In function 'zr36057_set_vfe':
	drivers/media/pci/zoran/zoran_device.c:451:3: warning: 'virt_to_bus' is deprecated (declared at /devel/v4l/ktest-build/arch/alpha/include/asm/io.h:114) [-Wdeprecated-declarations]
	drivers/media/pci/zoran/zoran_device.c:453:3: warning: 'virt_to_bus' is deprecated (declared at /devel/v4l/ktest-build/arch/alpha/include/asm/io.h:114) [-Wdeprecated-declarations]
	drivers/media/pci/zoran/zoran_device.c: In function 'zr36057_set_jpg':
	drivers/media/pci/zoran/zoran_device.c:796:2: warning: 'virt_to_bus' is deprecated (declared at /devel/v4l/ktest-build/arch/alpha/include/asm/io.h:114) [-Wdeprecated-declarations]
	drivers/media/pci/zoran/zoran_driver.c: In function 'v4l_fbuffer_alloc':
	drivers/media/pci/zoran/zoran_driver.c:241:3: warning: 'virt_to_bus' is deprecated (declared at /devel/v4l/ktest-build/arch/alpha/include/asm/io.h:114) [-Wdeprecated-declarations]
	drivers/media/pci/zoran/zoran_driver.c:245:3: warning: 'virt_to_bus' is deprecated (declared at /devel/v4l/ktest-build/arch/alpha/include/asm/io.h:114) [-Wdeprecated-declarations]
	drivers/media/pci/zoran/zoran_driver.c: In function 'jpg_fbuffer_alloc':
	drivers/media/pci/zoran/zoran_driver.c:334:3: warning: 'virt_to_bus' is deprecated (declared at /devel/v4l/ktest-build/arch/alpha/include/asm/io.h:114) [-Wdeprecated-declarations]
	drivers/media/pci/zoran/zoran_driver.c:347:5: warning: 'virt_to_bus' is deprecated (declared at /devel/v4l/ktest-build/arch/alpha/include/asm/io.h:114) [-Wdeprecated-declarations]
	drivers/media/pci/zoran/zoran_driver.c:366:6: warning: 'virt_to_bus' is deprecated (declared at /devel/v4l/ktest-build/arch/alpha/include/asm/io.h:114) [-Wdeprecated-declarations]
As we're not even sure if it works on Alpha, better to just disable its compilation there.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-07 15:03:19 -02:00
Jingoo Han 1fbf86a04e [media] ddbridge: Remove casting the return value which is a void pointer
Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-31 04:54:12 -02:00
Jingoo Han 0e7e4d26cf [media] ngene: Remove casting the return value which is a void pointer
Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-31 04:53:59 -02:00
Alexandru Juncu 0e48a3e8f6 [media] dm1105: remove unneeded not-null test
i2c_adap is a field of a struct and will always be allocated so
its address will never be null.
Suggested by coccinelle, manually verified.

Signed-off-by: Alexandru Juncu <alexj@rosedu.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-31 04:53:40 -02:00
Hans Verkuil 60b3b4d2de [media] cx25821: fix sparse warnings
drivers/media/pci/cx25821/cx25821-cards.c:49:20: warning: symbol 'cx25821_bcount' was not declared. Should it be static?
drivers/media/pci/cx25821/cx25821-video-upstream.c:162:33: warning: incorrect type in assignment (different base types)
drivers/media/pci/cx25821/cx25821-video-upstream.c:163:33: warning: incorrect type in assignment (different base types)
drivers/media/pci/cx25821/cx25821-video-upstream.c:164:33: warning: incorrect type in assignment (different base types)
drivers/media/pci/cx25821/cx25821-video-upstream.c:165:33: warning: incorrect type in assignment (different base types)
drivers/media/pci/cx25821/cx25821-medusa-video.h:43:16: warning: symbol '_num_decoders' was not declared. Should it be static?
drivers/media/pci/cx25821/cx25821-medusa-video.h:44:16: warning: symbol '_num_cameras' was not declared. Should it be static?
drivers/media/pci/cx25821/cx25821-medusa-video.h:46:14: warning: symbol '_video_standard' was not declared. Should it be static?
drivers/media/pci/cx25821/cx25821-medusa-video.h:47:5: warning: symbol '_display_field_cnt' was not declared. Should it be static?
After analyzing the last four warnings carefully it became clear that these
variables were really completely unused. As a result of that the call to
medusa_set_decoderduration() is now dubious since the duration is always 0.
Without documentation, however, I can't tell what the right value is.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:16:46 -03:00
Michael Opdenacker 43917b2552 [media] ivtv: remove deprecated IRQF_DISABLED
This patch proposes to remove the use of the IRQF_DISABLED flag
It's a NOOP since 2.6.35 and it will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:08:52 -03:00
Michael Opdenacker 7b5e71ad04 [media] zoran: remove deprecated IRQF_DISABLED
This patch proposes to remove the use of the IRQF_DISABLED flag
It's a NOOP since 2.6.35 and it will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:08:41 -03:00
Michael Opdenacker 3e018fe440 [media] misc drivers: remove deprecated IRQF_DISABLED
This patch proposes to remove the use of the IRQF_DISABLED flag
It's a NOOP since 2.6.35 and it will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:08:31 -03:00
Michael Opdenacker 9a373d17cc [media] cx18: remove deprecated IRQF_DISABLED
This patch proposes to remove the use of the IRQF_DISABLED flag
It's a NOOP since 2.6.35 and it will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:08:08 -03:00
Sachin Kamat ec9bdd22db [media] pci: ngene: Remove redundant pci_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:03:57 -03:00
Sachin Kamat b17a87be20 [media] pci: bt878: Remove redundant pci_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:03:48 -03:00
Sachin Kamat 7a409ebaec [media] pci: saa7164: Remove redundant pci_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:03:39 -03:00
Sachin Kamat a508db8705 [media] pci: pt1: Remove redundant pci_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:01:59 -03:00
Sachin Kamat 1e1159bb97 [media] pci: pluto2: Remove redundant pci_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:01:50 -03:00
Sachin Kamat 593781e48d [media] pci: mantis: Remove redundant pci_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:01:32 -03:00
Sachin Kamat 3982ccd2b3 [media] pci: dm1105: Remove redundant pci_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:01:18 -03:00
Sachin Kamat c0d4021f6c [media] pci: cx88: Remove redundant pci_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 06:01:05 -03:00
Sachin Kamat d441a4aaae [media] pci: flexcop: Remove redundant pci_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 05:56:55 -03:00
Sachin Kamat 06333e0aca [media] pci: cx88-video: Use module_pci_driver
module_pci_driver removes some boilerplate and makes code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 05:56:40 -03:00
Sachin Kamat 38b25adce8 [media] pci: cx88-mpeg: Use module_pci_driver
module_pci_driver removes some boilerplate and makes code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 05:56:30 -03:00
Sachin Kamat 59963b9498 [media] pci: cx88-alsa: Use module_pci_driver
module_pci_driver removes some boilerplate and makes code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17 05:56:18 -03:00
Anca Emanuel 642ca1a091 [media] cx23885: Add Leadtek Winfast PxPVR2200
Tested:
   Composite: http://imgur.com/Rb1TCF3
   TV: http://imgur.com/KNrfsmv
   Firmware used: xc3028-v27.fw

Not tested: audio, component, s-video, mpeg2 encoder, FM radio.

For audio, it uses an CD style cable to connect to the analog "CD_IN" on the motherboard.

I didn't found how to unmute it (alsamixer do not show an CD or AUX channel).

Signed-off-by: Anca Emanuel <anca.emanuel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-14 07:19:59 -03:00
Simon Farnsworth 9c9cff55bf [media] saa7134: Fix crash when device is closed before streamoff
pm_qos_remove_request was not called on video_release, resulting in the PM
core's list of requests being corrupted when the file handle was freed.
This has no immediate symptoms, but later in operation, the kernel will
panic as the PM core dereferences a dangling pointer.

Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-14 06:37:00 -03:00