We need to move the closing of the src_device out of all the device
replace locking, but we definitely want to zero out the superblock
before we commit the last time to make sure the device is properly
removed. Handle this by pushing btrfs_scratch_superblocks into
btrfs_dev_replace_finishing, and then later on we'll move the src_device
closing and freeing stuff where we need it to be.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay reported a lockdep splat in generic/476 that I could reproduce
with btrfs/187.
======================================================
WARNING: possible circular locking dependency detected
5.9.0-rc2+ #1 Tainted: G W
------------------------------------------------------
kswapd0/100 is trying to acquire lock:
ffff9e8ef38b6268 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x330
but task is already holding lock:
ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x65/0x80
slab_pre_alloc_hook.constprop.0+0x20/0x200
kmem_cache_alloc_trace+0x3a/0x1a0
btrfs_alloc_device+0x43/0x210
add_missing_dev+0x20/0x90
read_one_chunk+0x301/0x430
btrfs_read_sys_array+0x17b/0x1b0
open_ctree+0xa62/0x1896
btrfs_mount_root.cold+0x12/0xea
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x10d/0x379
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
path_mount+0x434/0xc00
__x64_sys_mount+0xe3/0x120
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__mutex_lock+0x7e/0x7e0
btrfs_chunk_alloc+0x125/0x3a0
find_free_extent+0xdf6/0x1210
btrfs_reserve_extent+0xb3/0x1b0
btrfs_alloc_tree_block+0xb0/0x310
alloc_tree_block_no_bg_flush+0x4a/0x60
__btrfs_cow_block+0x11a/0x530
btrfs_cow_block+0x104/0x220
btrfs_search_slot+0x52e/0x9d0
btrfs_lookup_inode+0x2a/0x8f
__btrfs_update_delayed_inode+0x80/0x240
btrfs_commit_inode_delayed_inode+0x119/0x120
btrfs_evict_inode+0x357/0x500
evict+0xcf/0x1f0
vfs_rmdir.part.0+0x149/0x160
do_rmdir+0x136/0x1a0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&delayed_node->mutex){+.+.}-{3:3}:
__lock_acquire+0x1184/0x1fa0
lock_acquire+0xa4/0x3d0
__mutex_lock+0x7e/0x7e0
__btrfs_release_delayed_node.part.0+0x3f/0x330
btrfs_evict_inode+0x24c/0x500
evict+0xcf/0x1f0
dispose_list+0x48/0x70
prune_icache_sb+0x44/0x50
super_cache_scan+0x161/0x1e0
do_shrink_slab+0x178/0x3c0
shrink_slab+0x17c/0x290
shrink_node+0x2b2/0x6d0
balance_pgdat+0x30a/0x670
kswapd+0x213/0x4c0
kthread+0x138/0x160
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Chain exists of:
&delayed_node->mutex --> &fs_info->chunk_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&fs_info->chunk_mutex);
lock(fs_reclaim);
lock(&delayed_node->mutex);
*** DEADLOCK ***
3 locks held by kswapd0/100:
#0: ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
#1: ffffffffa9d65c50 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x115/0x290
#2: ffff9e8e9da260e0 (&type->s_umount_key#48){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0
stack backtrace:
CPU: 1 PID: 100 Comm: kswapd0 Tainted: G W 5.9.0-rc2+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x92/0xc8
check_noncircular+0x12d/0x150
__lock_acquire+0x1184/0x1fa0
lock_acquire+0xa4/0x3d0
? __btrfs_release_delayed_node.part.0+0x3f/0x330
__mutex_lock+0x7e/0x7e0
? __btrfs_release_delayed_node.part.0+0x3f/0x330
? __btrfs_release_delayed_node.part.0+0x3f/0x330
? lock_acquire+0xa4/0x3d0
? btrfs_evict_inode+0x11e/0x500
? find_held_lock+0x2b/0x80
__btrfs_release_delayed_node.part.0+0x3f/0x330
btrfs_evict_inode+0x24c/0x500
evict+0xcf/0x1f0
dispose_list+0x48/0x70
prune_icache_sb+0x44/0x50
super_cache_scan+0x161/0x1e0
do_shrink_slab+0x178/0x3c0
shrink_slab+0x17c/0x290
shrink_node+0x2b2/0x6d0
balance_pgdat+0x30a/0x670
kswapd+0x213/0x4c0
? _raw_spin_unlock_irqrestore+0x46/0x60
? add_wait_queue_exclusive+0x70/0x70
? balance_pgdat+0x670/0x670
kthread+0x138/0x160
? kthread_create_worker_on_cpu+0x40/0x40
ret_from_fork+0x1f/0x30
This is because we are holding the chunk_mutex when we call
btrfs_alloc_device, which does a GFP_KERNEL allocation. We don't want
to switch that to a GFP_NOFS lock because this is the only place where
it matters. So instead use memalloc_nofs_save() around the allocation
in order to avoid the lockdep splat.
Reported-by: Nikolay Borisov <nborisov@suse.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the conversion of the tree locks to rwsem I got the following
lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925 Not tainted
------------------------------------------------------
btrfs-uuid/7955 is trying to acquire lock:
ffff88bfbafec0f8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180
but task is already holding lock:
ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (btrfs-uuid-00){++++}-{3:3}:
down_read_nested+0x3e/0x140
__btrfs_tree_read_lock+0x39/0x180
__btrfs_read_lock_root_node+0x3a/0x50
btrfs_search_slot+0x4bd/0x990
btrfs_uuid_tree_add+0x89/0x2d0
btrfs_uuid_scan_kthread+0x330/0x390
kthread+0x133/0x150
ret_from_fork+0x1f/0x30
-> #0 (btrfs-root-00){++++}-{3:3}:
__lock_acquire+0x1272/0x2310
lock_acquire+0x9e/0x360
down_read_nested+0x3e/0x140
__btrfs_tree_read_lock+0x39/0x180
__btrfs_read_lock_root_node+0x3a/0x50
btrfs_search_slot+0x4bd/0x990
btrfs_find_root+0x45/0x1b0
btrfs_read_tree_root+0x61/0x100
btrfs_get_root_ref.part.50+0x143/0x630
btrfs_uuid_tree_iterate+0x207/0x314
btrfs_uuid_rescan_kthread+0x12/0x50
kthread+0x133/0x150
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-uuid-00);
lock(btrfs-root-00);
lock(btrfs-uuid-00);
lock(btrfs-root-00);
*** DEADLOCK ***
1 lock held by btrfs-uuid/7955:
#0: ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180
stack backtrace:
CPU: 73 PID: 7955 Comm: btrfs-uuid Kdump: loaded Not tainted 5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925
Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018
Call Trace:
dump_stack+0x78/0xa0
check_noncircular+0x165/0x180
__lock_acquire+0x1272/0x2310
lock_acquire+0x9e/0x360
? __btrfs_tree_read_lock+0x39/0x180
? btrfs_root_node+0x1c/0x1d0
down_read_nested+0x3e/0x140
? __btrfs_tree_read_lock+0x39/0x180
__btrfs_tree_read_lock+0x39/0x180
__btrfs_read_lock_root_node+0x3a/0x50
btrfs_search_slot+0x4bd/0x990
btrfs_find_root+0x45/0x1b0
btrfs_read_tree_root+0x61/0x100
btrfs_get_root_ref.part.50+0x143/0x630
btrfs_uuid_tree_iterate+0x207/0x314
? btree_readpage+0x20/0x20
btrfs_uuid_rescan_kthread+0x12/0x50
kthread+0x133/0x150
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x1f/0x30
This problem exists because we have two different rescan threads,
btrfs_uuid_scan_kthread which creates the uuid tree, and
btrfs_uuid_tree_iterate that goes through and updates or deletes any out
of date roots. The problem is they both do things in different order.
btrfs_uuid_scan_kthread() reads the tree_root, and then inserts entries
into the uuid_root. btrfs_uuid_tree_iterate() scans the uuid_root, but
then does a btrfs_get_fs_root() which can read from the tree_root.
It's actually easy enough to not be holding the path in
btrfs_uuid_scan_kthread() when we add a uuid entry, as we already drop
it further down and re-start the search when we loop. So simply move
the path release before we add our entry to the uuid tree.
This also fixes a problem where we're holding a path open after we do
btrfs_end_transaction(), which has it's own problems.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
The following script can lead to tons of beyond device boundary access:
mkfs.btrfs -f $dev -b 10G
mount $dev $mnt
trimfs $mnt
btrfs filesystem resize 1:-1G $mnt
trimfs $mnt
[CAUSE]
Since commit 929be17a9b ("btrfs: Switch btrfs_trim_free_extents to
find_first_clear_extent_bit"), we try to avoid trimming ranges that's
already trimmed.
So we check device->alloc_state by finding the first range which doesn't
have CHUNK_TRIMMED and CHUNK_ALLOCATED not set.
But if we shrunk the device, that bits are not cleared, thus we could
easily got a range starts beyond the shrunk device size.
This results the returned @start and @end are all beyond device size,
then we call "end = min(end, device->total_bytes -1);" making @end
smaller than device size.
Then finally we goes "len = end - start + 1", totally underflow the
result, and lead to the beyond-device-boundary access.
[FIX]
This patch will fix the problem in two ways:
- Clear CHUNK_TRIMMED | CHUNK_ALLOCATED bits when shrinking device
This is the root fix
- Add extra safety check when trimming free device extents
We check and warn if the returned range is already beyond current
device.
Link: https://github.com/kdave/btrfs-progs/issues/282
Fixes: 929be17a9b ("btrfs: Switch btrfs_trim_free_extents to find_first_clear_extent_bit")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are currently getting this lockdep splat in btrfs/161:
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc5+ #20 Tainted: G E
------------------------------------------------------
mount/678048 is trying to acquire lock:
ffff9b769f15b6e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: clone_fs_devices+0x4d/0x170 [btrfs]
but task is already holding lock:
ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__mutex_lock+0x8b/0x8f0
btrfs_init_new_device+0x2d2/0x1240 [btrfs]
btrfs_ioctl+0x1de/0x2d20 [btrfs]
ksys_ioctl+0x87/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__lock_acquire+0x1240/0x2460
lock_acquire+0xab/0x360
__mutex_lock+0x8b/0x8f0
clone_fs_devices+0x4d/0x170 [btrfs]
btrfs_read_chunk_tree+0x330/0x800 [btrfs]
open_ctree+0xb7c/0x18ce [btrfs]
btrfs_mount_root.cold+0x13/0xfa [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x7de/0xb30
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->chunk_mutex);
lock(&fs_devs->device_list_mutex);
lock(&fs_info->chunk_mutex);
lock(&fs_devs->device_list_mutex);
*** DEADLOCK ***
3 locks held by mount/678048:
#0: ffff9b75ff5fb0e0 (&type->s_umount_key#63/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380
#1: ffffffffc0c2fbc8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x54/0x800 [btrfs]
#2: ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]
stack backtrace:
CPU: 2 PID: 678048 Comm: mount Tainted: G E 5.8.0-rc5+ #20
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
Call Trace:
dump_stack+0x96/0xd0
check_noncircular+0x162/0x180
__lock_acquire+0x1240/0x2460
? asm_sysvec_apic_timer_interrupt+0x12/0x20
lock_acquire+0xab/0x360
? clone_fs_devices+0x4d/0x170 [btrfs]
__mutex_lock+0x8b/0x8f0
? clone_fs_devices+0x4d/0x170 [btrfs]
? rcu_read_lock_sched_held+0x52/0x60
? cpumask_next+0x16/0x20
? module_assert_mutex_or_preempt+0x14/0x40
? __module_address+0x28/0xf0
? clone_fs_devices+0x4d/0x170 [btrfs]
? static_obj+0x4f/0x60
? lockdep_init_map_waits+0x43/0x200
? clone_fs_devices+0x4d/0x170 [btrfs]
clone_fs_devices+0x4d/0x170 [btrfs]
btrfs_read_chunk_tree+0x330/0x800 [btrfs]
open_ctree+0xb7c/0x18ce [btrfs]
? super_setup_bdi_name+0x79/0xd0
btrfs_mount_root.cold+0x13/0xfa [btrfs]
? vfs_parse_fs_string+0x84/0xb0
? rcu_read_lock_sched_held+0x52/0x60
? kfree+0x2b5/0x310
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
? cred_has_capability+0x7c/0x120
? rcu_read_lock_sched_held+0x52/0x60
? legacy_get_tree+0x30/0x50
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x7de/0xb30
? memdup_user+0x4e/0x90
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This is because btrfs_read_chunk_tree() can come upon DEV_EXTENT's and
then read the device, which takes the device_list_mutex. The
device_list_mutex needs to be taken before the chunk_mutex, so this is a
problem. We only really need the chunk mutex around adding the chunk,
so move the mutex around read_one_chunk.
An argument could be made that we don't even need the chunk_mutex here
as it's during mount, and we are protected by various other locks.
However we already have special rules for ->device_list_mutex, and I'd
rather not have another special case for ->chunk_mutex.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's long existed a lockdep splat because we open our bdev's under
the ->device_list_mutex at mount time, which acquires the bd_mutex.
Usually this goes unnoticed, but if you do loopback devices at all
suddenly the bd_mutex comes with a whole host of other dependencies,
which results in the splat when you mount a btrfs file system.
======================================================
WARNING: possible circular locking dependency detected
5.8.0-0.rc3.1.fc33.x86_64+debug #1 Not tainted
------------------------------------------------------
systemd-journal/509 is trying to acquire lock:
ffff970831f84db0 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x44/0x70 [btrfs]
but task is already holding lock:
ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (sb_pagefaults){.+.+}-{0:0}:
__sb_start_write+0x13e/0x220
btrfs_page_mkwrite+0x59/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
-> #5 (&mm->mmap_lock#2){++++}-{3:3}:
__might_fault+0x60/0x80
_copy_from_user+0x20/0xb0
get_sg_io_hdr+0x9a/0xb0
scsi_cmd_ioctl+0x1ea/0x2f0
cdrom_ioctl+0x3c/0x12b4
sr_block_ioctl+0xa4/0xd0
block_ioctl+0x3f/0x50
ksys_ioctl+0x82/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #4 (&cd->lock){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
sr_block_open+0xa2/0x180
__blkdev_get+0xdd/0x550
blkdev_get+0x38/0x150
do_dentry_open+0x16b/0x3e0
path_openat+0x3c9/0xa00
do_filp_open+0x75/0x100
do_sys_openat2+0x8a/0x140
__x64_sys_openat+0x46/0x70
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #3 (&bdev->bd_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
__blkdev_get+0x6a/0x550
blkdev_get+0x85/0x150
blkdev_get_by_path+0x2c/0x70
btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs]
open_fs_devices+0x88/0x240 [btrfs]
btrfs_open_devices+0x92/0xa0 [btrfs]
btrfs_mount_root+0x250/0x490 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x119/0x380 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x8c6/0xca0
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_run_dev_stats+0x36/0x420 [btrfs]
commit_cowonly_roots+0x91/0x2d0 [btrfs]
btrfs_commit_transaction+0x4e6/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_commit_transaction+0x48e/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}:
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
__mutex_lock+0x7b/0x820
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
other info that might help us debug this:
Chain exists of:
&fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sb_pagefaults);
lock(&mm->mmap_lock#2);
lock(sb_pagefaults);
lock(&fs_info->reloc_mutex);
*** DEADLOCK ***
3 locks held by systemd-journal/509:
#0: ffff97083bdec8b8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x12e/0x4b0
#1: ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
#2: ffff97083144d6a8 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3f8/0x500 [btrfs]
stack backtrace:
CPU: 0 PID: 509 Comm: systemd-journal Not tainted 5.8.0-0.rc3.1.fc33.x86_64+debug #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack+0x92/0xc8
check_noncircular+0x134/0x150
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
__mutex_lock+0x7b/0x820
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? kvm_sched_clock_read+0x14/0x30
? sched_clock+0x5/0x10
? sched_clock_cpu+0xc/0xb0
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
? sched_clock+0x5/0x10
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fa3972fdbfe
Code: Bad RIP value.
Fix this by not holding the ->device_list_mutex at this point. The
device_list_mutex exists to protect us from modifying the device list
while the file system is running.
However it can also be modified by doing a scan on a device. But this
action is specifically protected by the uuid_mutex, which we are holding
here. We cannot race with opening at this point because we have the
->s_mount lock held during the mount. Not having the
->device_list_mutex here is perfectly safe as we're not going to change
the devices at this point.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add some comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Since most metadata reservation calls can return -EINTR when get
interrupted by fatal signal, we need to review the all the metadata
reservation call sites.
In relocation code, the metadata reservation happens in the following
sites:
- btrfs_block_rsv_refill() in merge_reloc_root()
merge_reloc_root() is a pretty critical section, we don't want to be
interrupted by signal, so change the flush status to
BTRFS_RESERVE_FLUSH_LIMIT, so it won't get interrupted by signal.
Since such change can be ENPSPC-prone, also shrink the amount of
metadata to reserve least amount avoid deadly ENOSPC there.
- btrfs_block_rsv_refill() in reserve_metadata_space()
It calls with BTRFS_RESERVE_FLUSH_LIMIT, which won't get interrupted
by signal.
- btrfs_block_rsv_refill() in prepare_to_relocate()
- btrfs_block_rsv_add() in prepare_to_relocate()
- btrfs_block_rsv_refill() in relocate_block_group()
- btrfs_delalloc_reserve_metadata() in relocate_file_extent_cluster()
- btrfs_start_transaction() in relocate_block_group()
- btrfs_start_transaction() in create_reloc_inode()
Can be interrupted by fatal signal and we can handle it easily.
For these call sites, just catch the -EINTR value in btrfs_balance()
and count them as canceled.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The whole chunk tree is read at mount time so we can utilize readahead
to get the tree blocks to memory before we read the items. The idea is
from Robbie, but instead of updating search slot readahead, this patch
implements the chunk tree readahead manually from nodes on level 1.
We've decided to do specific readahead optimizations and then unify them
under a common API so we don't break everything by changing the search
slot readahead logic.
Higher chunk trees grow on large filesystems (many terabytes), and
prefetching just level 1 seems to be sufficient. Provided example was
from a 200TiB filesystem with chunk tree level 2.
CC: Robbie Ko <robbieko@synology.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since btrfs_bio always contains the extra space for the tgtdev_map and
raid_maps it's pointless to make the assignment iff specific conditions
are met.
Instead, always assign the pointers to their correct value at allocation
time. To accommodate this change also move code a bit in
__btrfs_map_block so that btrfs_bio::stripes array is always initialized
before the raid_map, subsequently move the call to sort_parity_stripes
in the 'if' building the raid_map, retaining the old behavior.
To better understand the change, there are 2 aspects to this:
1. The original code is harder to grasp because the calculations for
initializing raid_map/tgtdev ponters are apart from the initial
allocation of memory. Having them predicated on 2 separate checks
doesn't help that either... So by moving the initialisation in
alloc_btrfs_bio puts everything together.
2. tgtdev/raid_maps are now always initialized despite sometimes they
might be equal i.e __btrfs_map_block_for_discard calls
alloc_btrfs_bio with tgtdev = 0 but their usage should be predicated
on external checks i.e. just because those pointers are non-null
doesn't mean they are valid per-se. And actually while taking another
look at __btrfs_map_block I saw a discrepancy:
Original code initialised tgtdev_map if the following check is true:
if (dev_replace_is_ongoing && dev_replace->tgtdev != NULL)
However, further down tgtdev_map is only used if the following check
is true:
if (dev_replace_is_ongoing && dev_replace->tgtdev != NULL && need_full_stripe(op))
e.g. the additional need_full_stripe(op) predicate is there.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy more details from mail discussion ]
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_map_bio ensures that all submitted bios to devices have valid
btrfs_device::bdev so this check can be removed from btrfs_end_bio. This
check was added in june 2012 597a60fade ("Btrfs: don't count I/O
statistic read errors for missing devices") but then in October of the
same year another commit de1ee92ac3 ("Btrfs: recheck bio against
block device when we map the bio") started checking for the presence of
btrfs_device::bdev before actually issuing the bio.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of recording stripe_index and using that to access correct
btrfs_device from btrfs_bio::stripes record the btrfs_device in
btrfs_io_bio. This will enable endio handlers to increment device
error counters on checksum errors.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On a filesystem with exhausted metadata, but still enough to start
balance, it's possible to hit this error:
[324402.053842] BTRFS info (device loop0): 1 enospc errors during balance
[324402.060769] BTRFS info (device loop0): balance: ended with status: -28
[324402.172295] BTRFS: error (device loop0) in reset_balance_state:3321: errno=-28 No space left
It fails inside reset_balance_state and turns the filesystem to
read-only, which is unnecessary and should be fixed too, but the problem
is caused by lack for space when the balance item is deleted. This is a
one-time operation and from the same rank as unlink that is allowed to
use the global block reserve. So do the same for the balance item.
Status of the filesystem (100GiB) just after the balance fails:
$ btrfs fi df mnt
Data, single: total=80.01GiB, used=38.58GiB
System, single: total=4.00MiB, used=16.00KiB
Metadata, single: total=19.99GiB, used=19.48GiB
GlobalReserve, single: total=512.00MiB, used=50.11MiB
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It is possible to cause a btrfs mount to fail by racing it with a slow
umount. The crux of the sequence is generic_shutdown_super not yet
calling sop->put_super before btrfs_mount_root calls btrfs_open_devices.
If that occurs, btrfs_open_devices will decide the opened counter is
non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to
0. From here, mount will call sget which will result in grab_super
trying to take the super block umount semaphore. That semaphore will be
held by the slow umount, so mount will block. Before up-ing the
semaphore, umount will delete the super block, resulting in mount's sget
reliably allocating a new one, which causes the mount path to dutifully
fill it out, and increment total_rw_bytes a second time, which causes
the mount to fail, as we see double the expected bytes.
Here is the sequence laid out in greater detail:
CPU0 CPU1
down_write sb->s_umount
btrfs_kill_super
kill_anon_super(sb)
generic_shutdown_super(sb);
shrink_dcache_for_umount(sb);
sync_filesystem(sb);
evict_inodes(sb); // SLOW
btrfs_mount_root
btrfs_scan_one_device
fs_devices = device->fs_devices
fs_info->fs_devices = fs_devices
// fs_devices-opened makes this a no-op
btrfs_open_devices(fs_devices, mode, fs_type)
s = sget(fs_type, test, set, flags, fs_info);
find sb in s_instances
grab_super(sb);
down_write(&s->s_umount); // blocks
sop->put_super(sb)
// sb->fs_devices->opened == 2; no-op
spin_lock(&sb_lock);
hlist_del_init(&sb->s_instances);
spin_unlock(&sb_lock);
up_write(&sb->s_umount);
return 0;
retry lookup
don't find sb in s_instances (deleted by CPU0)
s = alloc_super
return s;
btrfs_fill_super(s, fs_devices, data)
open_ctree // fs_devices total_rw_bytes improperly set!
btrfs_read_chunk_tree
read_one_dev // increment total_rw_bytes again!!
super_total_bytes < fs_devices->total_rw_bytes // ERROR!!!
To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree
before the calls to read_one_dev, while holding the sb umount semaphore
and the uuid mutex.
To reproduce, it is sufficient to dirty a decent number of inodes, then
quickly umount and mount.
for i in $(seq 0 500)
do
dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1
done
umount /mnt/foo&
mount /mnt/foo
does the trick for me.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit dccdb07bc9 ("btrfs: kill btrfs_fs_info::volume_mutex") removed
the last use of the volume_mutex, forgetting to update the comment.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When an old device has new fsid through 'btrfs device add -f <dev>' our
fs_devices list has an alien device in one of the fs_devices lists.
By having an alien device in fs_devices, we have two issues so far
1. missing device does not not show as missing in the userland
2. degraded mount will fail
Both issues are caused by the fact that there's an alien device in the
fs_devices list. (Alien means that it does not belong to the filesystem,
identified by fsid, or does not contain btrfs filesystem at all, eg. due
to overwrite).
A device can be scanned/added through the control device ioctls
SCAN_DEV, DEVICES_READY or by ADD_DEV.
And device coming through the control device is checked against the all
other devices in the lists, but this was not the case for ADD_DEV.
This patch fixes both issues above by removing the alien device.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_free_extra_devids() updates fs_devices::latest_bdev to point to
the bdev with greatest device::generation number. For a typical-missing
device the generation number is zero so fs_devices::latest_bdev will
never point to it.
But if the missing device is due to alienation [1], then
device::generation is not zero and if it is greater or equal to the rest
of device generations in the list, then fs_devices::latest_bdev ends up
pointing to the missing device and reports the error like [2].
[1] We maintain devices of a fsid (as in fs_device::fsid) in the
fs_devices::devices list, a device is considered as an alien device
if its fsid does not match with the fs_device::fsid
Consider a working filesystem with raid1:
$ mkfs.btrfs -f -d raid1 -m raid1 /dev/sda /dev/sdb
$ mount /dev/sda /mnt-raid1
$ umount /mnt-raid1
While mnt-raid1 was unmounted the user force-adds one of its devices to
another btrfs filesystem:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt-single
$ btrfs dev add -f /dev/sda /mnt-single
Now the original mnt-raid1 fails to mount in degraded mode, because
fs_devices::latest_bdev is pointing to the alien device.
$ mount -o degraded /dev/sdb /mnt-raid1
[2]
mount: wrong fs type, bad option, bad superblock on /dev/sdb,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
kernel: BTRFS warning (device sdb): devid 1 uuid 072a0192-675b-4d5a-8640-a5cf2b2c704d is missing
kernel: BTRFS error (device sdb): failed to read devices
kernel: BTRFS error (device sdb): open_ctree failed
Fix the root cause by checking if the device is not missing before it
can be considered for the fs_devices::latest_bdev.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need of goto out in open_fs_devices() as there is nothing
special done there.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of returning both the page and the super block structure, make
btrfs_read_disk_super just return a pointer to struct btrfs_disk_super.
As a result the function signature is simplified. Also,
read_cache_page_gfp can never return NULL so check its return value only
for IS_ERR.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new error injection point, should_cancel_balance().
It's just a wrapper of atomic_read(&fs_info->balance_cancel_req), but
allows us to override the return value.
Currently there are only one locations using this function:
- btrfs_balance()
It checks cancel before each block group.
There are other locations checking fs_info->balance_cancel_req, but they
are not used as an indicator to exit, so there is no need to use the
wrapper.
But there will be more locations coming, and some locations can cause
kernel panic if not handled properly. So introduce this error injection
to provide better test interface.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The validation follows the same steps for all three block group types,
the existing helper validate_convert_profile can be enhanced and do more
of the common things.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Having btrfs_alloc_chunk doesn't bring any value since it
encapsulates a lockdep assert and a call to find_next_chunk. Simply
rename the internal __btrfs_alloc_chunk function to the public one
and remove it's 2nd parameter as all callers always pass the return
value of find_next_chunk. Finally, migrate the call to
lockdep_assert_held so as to not lose the check.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we ignore a device whose available space is less than
"BTRFS_STRIPE_LEN * dev_stripes". This is a lower limit for current
allocation policy (to maximize the number of stripes). This commit
parameterizes dev_extent_min, so that other policies can set their own
lower limitat to ignore a device with insufficient space.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out create_chunk() from __btrfs_alloc_chunk(). This function
finally creates a chunk. There is no functional changes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out decide_stripe_size() from __btrfs_alloc_chunk(). This
function calculates the actual stripe size to allocate.
decide_stripe_size() handles the common case to round down the 'ndevs'
to 'devs_increment' and check the upper and lower limitation of 'ndevs'.
decide_stripe_size_regular() decides the size of a stripe and the size
of a chunk. The policy is to maximize the number of stripes.
This commit has no functional changes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out gather_device_info() from __btrfs_alloc_chunk(). This
function iterates over devices list and gather information about
devices. This commit also introduces "max_avail" and
"dev_extent_min" to fold the same calculation to one variable.
This commit has no functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out init_alloc_chunk_ctl() from __btrfs_alloc_chunk(). This
function initialises parameters of "struct alloc_chunk_ctl" for
allocation. init_alloc_chunk_ctl() handles a common part of the
initialisation to load the RAID parameters from btrfs_raid_array.
init_alloc_chunk_ctl_policy_regular() decides some parameters for its
allocation.
The last "else" case in the original code is moved to
__btrfs_alloc_chunk() to handle the error case in the common code.
Replace the BUG_ON with ASSERT() and error return at the same time.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce "struct alloc_chunk_ctl" to wrap needed parameters for the
chunk allocation. This will be used to split __btrfs_alloc_chunk() into
smaller functions.
This commit folds a number of local variables in __btrfs_alloc_chunk()
into one "struct alloc_chunk_ctl ctl". There is no functional change.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out two functions from find_free_dev_extent_start().
dev_extent_search_start() decides the starting position of the search.
dev_extent_hole_check() checks if a hole found is suitable for device
extent allocation.
These functions also have the switch-cases to change the allocation
behavior depending on the policy.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce chunk allocation policy for btrfs. This policy controls how
chunks and device extents are allocated from devices.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Do not BUG_ON() when an invalid profile is passed to __btrfs_alloc_chunk().
Instead return -EINVAL with ASSERT() to catch a bug in the development
stage.
Suggested-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't use the u_XX types anywhere, though they're defined.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove trivial comprator and open coded swap of two values.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a simple forwarded call based on the operation that would better
fit the caller btrfs_map_block that's until now a trivial wrapper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In doing my fsstress+EIO stress testing I started running into issues
where umount would get stuck forever because the uuid checker was
chewing through the thousands of subvolumes I had created.
We shouldn't block umount on this, simply bail if we're unmounting the
fs. We need to make sure we don't mark the UUID tree as ok, so we only
set that bit if we made it through the whole rescan operation, but
otherwise this is completely safe.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's used only during filesystem mount as such it can be made private to
disk-io.c file. Also use the occasion to move btrfs_uuid_rescan_kthread
as btrfs_check_uuid_tree is its sole caller.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_uuid_tree_iterate is called from only once place and its 2nd
argument is always btrfs_check_uuid_tree_entry. Simplify
btrfs_uuid_tree_iterate's signature by removing its 2nd argument and
directly calling btrfs_check_uuid_tree_entry. Also move the latter into
uuid-tree.h. No functional changes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Super-block reading in BTRFS is done using buffer_heads. Buffer_heads
have some drawbacks, like not being able to propagate errors from the
lower layers.
Directly use the page cache for reading the super blocks from disk or
invalidating an on-disk super block. We have to use the page cache so to
avoid races between mkfs and udev. See also 6f60cbd3ae ("btrfs: access
superblock via pagecache in scan_one_device").
This patch unwraps the buffer head API and does not change the way the
super block is actually read.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_scratch_superblocks() isn't used anywhere outside volumes.c so
remove it from the header file and mark it as static. Also move it
above it's callers so we don't need a forward declaration.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Block device mappings are never in highmem so kmap() / kunmap() calls for
pages from block devices are unneeded. Use page_address() instead of
kmap() to get to the virtual addreses.
While we're at it, read_cache_page_gfp() doesn't return NULL on error,
only an ERR_PTR, so use IS_ERR() to check for errors.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preparatory patch for removal of buffer_head usage in btrfs.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 668e48af7a ("btrfs: sysfs, add devid/dev_state kobject and
device attributes"), the functions btrfs_sysfs_add_device_link() and
btrfs_sysfs_rm_device_link() do more than just adding and removing the
device link as its name indicated. Rename them to be more specific
that's about the directory with the attirbutes
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are now using these for all roots, rename them to btrfs_put_root()
and btrfs_grab_root();
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that all callers of btrfs_get_fs_root are subsequently calling
btrfs_grab_fs_root and handling dropping the ref when they are done
appropriately, go ahead and push btrfs_grab_fs_root up into
btrfs_get_fs_root.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We lookup the uuid of arbitrary subvolumes, hold a ref on the root while
we're doing this.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All this does is call btrfs_get_fs_root() with check_ref == true. Just
use btrfs_get_fs_root() so we don't have a bunch of different helpers
that do the same thing.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current code doesn't correctly handle the situation which arises when
a file system that has METADATA_UUID_INCOMPAT flag set and has its FSID
changed to the one in metadata uuid. This causes the incompat flag to
disappear.
In case of a power failure we could end up in a situation where part of
the disks in a multi-disk filesystem are correctly reverted to
METADATA_UUID_INCOMPAT flag unset state, while others have
METADATA_UUID_INCOMPAT set and CHANGING_FSID_V2_IN_PROGRESS.
This patch corrects the behavior required to handle the case where a
disk of the second type is scanned first, creating the necessary
btrfs_fs_devices. Subsequently, when a disk which has already completed
the transition is scanned it should overwrite the data in
btrfs_fs_devices.
Reported-by: Su Yue <Damenly_Su@gmx.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is one more cases which isn't handled by the original metadata
uuid work. Namely, when a filesystem has METADATA_UUID incompat bit and
the user decides to change the FSID to the original one e.g. have
metadata_uuid and fsid match. In case of power failure while this
operation is in progress we could end up in a situation where some of
the disks have the incompat bit removed and the other half have both
METADATA_UUID_INCOMPAT and FSID_CHANGING_IN_PROGRESS flags.
This patch handles the case where a disk that has successfully changed
its FSID such that it equals METADATA_UUID is scanned first.
Subsequently when a disk with both
METADATA_UUID_INCOMPAT/FSID_CHANGING_IN_PROGRESS flags is scanned
find_fsid_changed won't be able to find an appropriate btrfs_fs_devices.
This is done by extending find_fsid_changed to correctly find
btrfs_fs_devices whose metadata_uuid/fsid are the same and they match
the metadata_uuid of the currently scanned device.
Fixes: cc5de4e702 ("btrfs: Handle final split-brain possibility during fsid change")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reported-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
find_fsid became rather hairy with the introduction of metadata uuid
changing feature. Alleviate this by factoring out the metadata uuid
specific code in a dedicated function which deals with finding
correct fsid for a device with changed uuid.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since find_fsid_inprogress should also handle the case in which an fs
didn't change its FSID make it call find_fsid directly. This makes the
code in device_list_add simpler by eliminating a conditional call of
find_fsid. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik