Commit Graph

16 Commits

Author SHA1 Message Date
Vinod Koul 0b5ad7b952 Merge branch 'for-linus' into fixes
Signed-off-by: Vinod Koul <vkoul@kernel.org>

 Conflicts:
	drivers/dma/idxd/sysfs.c
2020-08-05 19:02:07 +05:30
Dave Jiang 0d5c10b4c8 dmaengine: idxd: add work queue drain support
Add wq drain support. When a wq is being released, it needs to wait for
all in-flight operation to complete.  A device control function
idxd_wq_drain() has been added to facilitate this. A wq drain call
is added to the char dev on release to make sure all user operations are
complete. A wq drain is also added before the wq is being disabled.

A drain command can take an unpredictable period of time. Interrupt support
for device commands is added to allow waiting on the command to
finish. If a previous command is in progress, the new submitter can block
until the current command is finished before proceeding. The interrupt
based submission will submit the command and then wait until a command
completion interrupt happens to complete. All commands are moved to the
interrupt based command submission except for the device reset during
probe, which will be polled.

Fixes: 42d279f913 ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/159319502515.69593.13451647706946040301.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-13 14:48:02 +05:30
Dave Jiang da32b28c95 dmaengine: idxd: cleanup workqueue config after disabling
After disabling a device, we should clean up the internal state for
the wqs and zero out the configuration registers. Without doing so can cause
issues when the user reprogram the wqs.

Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Yixin Zhang <yixin.zhang@intel.com>
Link: https://lore.kernel.org/r/159311264246.1198.11955791213681679428.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-02 19:02:19 +05:30
Dave Jiang c2ce6bbcfc dmaengine: idxd: export hw version through sysfs
Some user apps would like to know the hardware version in order to
determine the variation of the hardware. Export the hardware version number
to userspace via sysfs.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158696714008.39484.13401950732606906479.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-15 21:54:00 +05:30
Linus Torvalds e964f1e04a dmaengine updates for v5.7-rc1
- Core:
     - Some code cleanup and optimization in core by Andy
     - Debugfs support for displaying dmaengine channels by Peter
 
   - Drivers:
     - New driver for uniphier-xdmac controller
     - Updates to stm32 dma, mdma and dmamux drivers and PM support
     - More updates to idxd drivers
     - Bunch of changes in tegra-apb driver and cleaning up of pm functions
     - Bunch of spelling fixes and Replace zero-length array patches
     - Shutdown hook for fsl-dpaa2-qdma driver
     - Support for interleaved transfers for ti-edma and virtualization
       support for k3-dma driver
     - Support for reset and updates in xilinx_dma driver
     - Improvements and locking updates in at_hdma driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl6FyokACgkQfBQHDyUj
 g0dnFRAAj9lvpflrL+b9eWBZkY1ElV1jAdxsTs4HnYdXQM3ijw8yOosVVSqiuiOy
 2qMfSRTP7qU9gqZ7oa1fnh05DqPmuTc3OF2IZlvGzkU9CiGQ735WGGGG8FfK/dZe
 F4OgQGwA45b47hNIbvM4acwWZYPL+pBuYusKdjdHkouqVM4SORiNM8aRrCJ59xIn
 P9TER//sMpdMEASuRuUIQnXb+OzSNPn1mLiP3zT0XHSM/nBMTAm7AnCDNT/Tjs9f
 hwk2j8rLrwllHGqeZln8cWLhUCPrZFNe5pBWtWyV3MyY/nxlrcUX0ndJUGJIDtsb
 nfXc4QKemOeF1RsC8DsQ/AY8jl6HFvRzWEEkq742IrLPCu/nTnxia4dbXW9MJ0Dp
 BI7IPwoaOoYqBdRkBnSVS2F4x3813egsEReznlu/sUorTIG2g9sWtmuzv6eRt4ow
 HczGgfdJXfCvIKbRg5TIXpbaJogbbB+1YrUlWq9vrZyhVw0ULtfxlWVKDy5VI1cL
 0Kiz/ZIGuoQ9h6E4G3jCpaQTV49tNbYp+vimU9kizmcm+WXrTXR7rgD4AI5tH2DQ
 pxYXNEl4gm1NRtWL1zzJ+B1C0MPXpc1Xafl92W39D6rphEGOdVVzay8meVIaQKDU
 qQaZ1dEK4uuSxwj8NrF7sXHSClafF888FFJBEMArde1HVql/HRU=
 =+UJ7
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "Core:
   - Some code cleanup and optimization in core by Andy

   - Debugfs support for displaying dmaengine channels by Peter

  Drivers:
   - New driver for uniphier-xdmac controller

   - Updates to stm32 dma, mdma and dmamux drivers and PM support

   - More updates to idxd drivers

   - Bunch of changes in tegra-apb driver and cleaning up of pm
     functions

   - Bunch of spelling fixes and Replace zero-length array patches

   - Shutdown hook for fsl-dpaa2-qdma driver

   - Support for interleaved transfers for ti-edma and virtualization
     support for k3-dma driver

   - Support for reset and updates in xilinx_dma driver

   - Improvements and locking updates in at_hdma driver"

* tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits)
  dt-bindings: dma: renesas,usb-dmac: add r8a77961 support
  dmaengine: uniphier-xdmac: Remove redandant error log for platform_get_irq
  dmaengine: tegra-apb: Improve DMA synchronization
  dmaengine: tegra-apb: Don't save/restore IRQ flags in interrupt handler
  dmaengine: tegra-apb: mark PM functions as __maybe_unused
  dmaengine: fix spelling mistake "exceds" -> "exceeds"
  dmaengine: sprd: Set request pending flag when DMA controller is active
  dmaengine: ppc4xx: Use scnprintf() for avoiding potential buffer overflow
  dmaengine: idxd: remove global token limit check
  dmaengine: idxd: reflect shadow copy of traffic class programming
  dmaengine: idxd: Merge definition of dsa_batch_desc into dsa_hw_desc
  dmaengine: Create debug directories for DMA devices
  dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfs
  dmaengine: Add basic debugfs support
  dmaengine: fsl-dpaa2-qdma: remove set but not used variable 'dpaa2_qdma'
  dmaengine: ti: edma: fix null dereference because of a typo in pointer name
  dmaengine: fsl-dpaa2-qdma: Adding shutdown hook
  dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver
  dt-bindings: dmaengine: Add UniPhier external DMA controller bindings
  dmaengine: ti: k3-udma: Implement support for atype (for virtualization)
  ...
2020-04-02 16:04:42 -07:00
Dave Jiang 91124ac612 dmaengine: idxd: remove global token limit check
The global token_limit is not tied to group tokens_reserved and
tokens_allowed parameters. Remove the check in order to allow independent
configuration.

Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158386266911.11066.7545764533072221536.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-11 15:08:52 +05:30
Dave Jiang 9065958ee6 dmaengine: idxd: expose general capabilities register in sysfs
There are some capabilities for the device that are interesting to user
apps that are interacting directly with the device. Expose gencap register
in sysfs to allow that information.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158256729399.55526.10842505054968710547.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-02 12:43:49 +05:30
Dave Jiang 50e7e7f6f2 dmaengine: idxd: wq size configuration needs to check global max size
The current size_store() function for idxd sysfs does not check the total
wq size. This allows configuration of all wqs with total wq size. Add check
to make sure the wq sysfs attribute rejects storing of size over the total
wq size.

Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Reported-by: Jerry Chen <jerry.t.chen@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158213309629.2509.3583411832507185041.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-24 22:02:34 +05:30
Dave Jiang 88402c5b1b dmaengine: idxd: sysfs input of wq incorrect wq type should return error
Currently when inputing an unrecognized wq type, we set the wq type to
"none". It really should return error and not change the existing wq type
that's in the kernel.

Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158213304803.2290.13336343633425868211.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-24 22:02:34 +05:30
Dave Jiang 2d0b191945 dmaengine: idxd: correct reserved token calculation
The calcuation for limit of reserved token did not take into account the
change the user wanted vs the current group reserved token. This causes
changing of the reserved token to be possible only after we set the value
of the reserved token back to 0. Fix calculation so we can set a value that
is non zero for reserved token.

Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Reported-by: Jerry Chen <jerry.t.chen@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158204471889.37789.7749177228265869168.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19 14:48:46 +05:30
Dave Jiang 61b5865d56 dmaengine: idxd: fix runaway module ref count on device driver bind
idxd_config_bus_probe() calls try_module_get() but never calls module_put()
when it fails. Thus with every failed attempt, the ref count goes up. Add
module_put() in failure paths.

Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Reported-by: Jerry Chen <jerry.t.chen@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158144296730.41381.12134210685456322434.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13 20:11:00 +05:30
YueHaibing f7b280c638 dmaengine: idxd: remove set but not used variable 'group'
drivers/dma/idxd/sysfs.c: In function engine_group_id_store:
drivers/dma/idxd/sysfs.c:419:29: warning: variable group set but not used [-Wunused-but-set-variable]

It is not used, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20200211135335.55924-1-yuehaibing@huawei.com
Signed-Off-By: Vinod Koul <vkoul@kernel.org>
2020-02-13 19:17:36 +05:30
kbuild test robot a9113a90f5 dmaengine: idxd: fix boolconv.cocci warnings
Remove unneeded conversion to bool

Generated by: scripts/coccinelle/misc/boolconv.cocci

CC: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2001301543150.7476@hadrien
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-03 09:46:55 +05:30
Dave Jiang 42d279f913 dmaengine: idxd: add char driver to expose submission portal to userland
Create a char device region that will allow acquisition of user portals in
order to allow applications to submit DMA operations. A char device will be
created per work queue that gets exposed. The workqueue type "user"
is used to mark a work queue for user char device. For example if the
workqueue 0 of DSA device 0 is marked for char device, then a device node
of /dev/dsa/wq0.0 will be created.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/157965026985.73301.976523230037106742.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24 11:18:45 +05:30
Dave Jiang 8f47d1a5e5 dmaengine: idxd: connect idxd to dmaengine subsystem
Add plumbing for dmaengine subsystem connection. The driver register a DMA
device per DSA device. The channels are dynamically registered when a
workqueue is configured to be "kernel:dmanegine" type.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/157965026376.73301.13867988830650740445.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24 11:18:45 +05:30
Dave Jiang c52ca47823 dmaengine: idxd: add configuration component of driver
The device is left unconfigured when the driver is loaded. Various
components are configured via the driver sysfs attributes. Once
configuration is done, the device can be enabled by writing the device name
to the bind attribute of the device driver sysfs. Disabling can be done
similarly. Also the individual work queues can also be enabled and disabled
through the bind/unbind attributes. A constructed hierarchy is created
through the struct device framework in order to provide appropriate
configuration points and device state and status. This hierarchy is
presented off the virtual DSA bus.

i.e. /sys/bus/dsa/...

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/157965024585.73301.6431413676230150589.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24 11:18:45 +05:30