Commit Graph

8 Commits

Author SHA1 Message Date
Yoshihiro Shimoda b8a56e17e1 usb: gadget: r8a66597-udc: add support for SUDMAC
SH7757 has a USB function with internal DMA controller (SUDMAC).
This patch supports the SUDMAC. The SUDMAC is incompatible with
general-purpose DMAC. So, it doesn't use dmaengine.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13 20:38:39 +03:00
Greg Kroah-Hartman 18fbb93fbe Merge branch 'for-next' of master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb into usb-next
* 'for-next' of master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb:
  usb: gadget: m66592-udc: add pullup function
  usb: gadget: m66592-udc: add function for external controller
  usb: gadget: r8a66597-udc: add pullup function
  usb: gadget: zero: add superspeed support
  usb: gadget: add SS descriptors to Ethernet gadget
  usb: gadget: r8a66597-udc: add support for TEST_MODE
  usb: gadget: m66592-udc: add support for TEST_MODE
  usb: gadget: r8a66597-udc: Make BUSWAIT configurable through platform data
  usb: gadget: r8a66597-udc: fix cannot connect after rmmod gadget driver
  usb: update email address in r8a66597-udc and m66592-udc
  usb: musb: restore INDEX register in resume path
  usb: gadget: fix up depencies
  usb: gadget: fusb300_udc: fix compile warnings
  usb: gadget: ci13xx_udc.c: fix compile warning
  usb: gadget: net2272: fix compile warnings
  usb: gadget: langwell_udc: fix compile warnings
  usb: gadget: fusb300_udc: drop dead code
2011-07-08 15:30:55 -07:00
Yoshihiro Shimoda 45304e8cd9 usb: update email address in ohci-sh and r8a66597-hcd
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-08 14:57:12 -07:00
Yoshihiro Shimoda f2e9039a43 usb: r8a66597-hcd: add function for external controller
R8A66597 has the pin of WR0 and WR1. So, if one write-pin of CPU
connects to the pins, we have to change the setting of FIFOSEL
register in the controller. If we don't change the setting,
the controller cannot send the data of odd length.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-08 14:57:11 -07:00
Yoshihiro Shimoda 5154e9f126 usb: gadget: r8a66597-udc: Make BUSWAIT configurable through platform data
BUSWAIT is a 4-bit-wide value that controls the number of access waits
from the CPU to on-chip USB module. b'0000 inserts 0 wait (2 access
cycles) and b'1111 inserts 15 waits (17 access cycles, hardware
initial value), respectively.

BUSWAIT value depends on peripheral clock frequency supplied to on-chip
of each CPU, hence should be configurable through platform data.

Note that this patch assumes that b'0000 (0 wait, 2 access cycles) is
rerely used and considered as invalid. If valid 'buswait' data is not
provided by platform, initial b'1111 (15 waits, 17 access cycles) will
be applied as a safe default.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-07-08 12:47:42 +03:00
Magnus Damm cf4f1e76c4 usb: move r8a66597 register defines
Move r8a66597 hardware register definitions from the host
controller header file to the platform data header file.

With this change in place we can easily share register
definitions between the host controller driver and a future
gadget driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23 13:04:10 +09:00
Magnus Damm 719a72b7c7 usb: r8a66597-hcd platform data on_chip support
Convert the r8a66597-hcd driver to use the on_chip flag
from platform data to enable on chip behaviour instead
of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness.

This makes the code cleaner and also allows us to support
both external and internal r8a66597 with the same kernel.

It also makes the Kconfig part more future proof since
we with this patch can add support for new processors
with on-chip r8a66597 without modifying the Kconfig.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-20 04:27:10 +09:00
Yoshihiro Shimoda 5effabbe9e USB: r8a66597-hcd: use platform_data instead of module_param
CPU/board specific parameters (PLL clock, vif etc...) can be set
by platform_data instead of module_param.

v2: remove irq_sense member in platform_data because it can OR in
    IRQF_TRIGGER_LOW or IRQF_TRIGGER_FALLING against IORESOURCE_IRQ in
    the struct resource.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:44:46 -07:00