Commit Graph

4662 Commits

Author SHA1 Message Date
Alex Deucher a377e187df drm/radeon/kms/r6xx+: voltage fixes
0xff01 is not an actual voltage value, but a flag
for the driver.  If the power state as that value,
skip setting the voltage.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-21 09:38:25 +10:00
Dave Airlie 4ee1c57fca drm/nouveau: drop leftover debugging
this printk isn't really useful, just drop it for now.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-20 15:27:18 +10:00
Dave Airlie ca295e50c2 Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau: fix assumption that semaphore dmaobj is valid in x-chan sync
  drm/nv50/disp: fix gamma with page flipping overlay turned on
  drm/nouveau/pm: Prevent overflow in nouveau_perf_init()
  drm/nouveau: fix big-endian switch
2011-06-20 12:02:38 +10:00
Dave Airlie 682f1a54a0 drm/radeon: avoid warnings from r600/eg irq handlers on powered off card.
Since we were calling the wptr function before checking if the IH was
even enabled, or the GPU wasn't shutdown, we'd get spam in the logs when
the GPU readback 0xffffffff. This reorders things so we return early
in the no IH and GPU shutdown cases.

Reported-and-tested-by: ManDay on #radeon
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-20 12:01:43 +10:00
Alex Deucher 74d074eecb drm/radeon/kms: add missing param for dce3.2 DP transmitter setup
This is used during phy init to set up the phy for DP.  This may
fix DP problems on DCE3.2 cards.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-20 09:53:02 +10:00
Alex Deucher 8323fa6ba3 drm/radeon/kms/atom: fix duallink on some early DCE3.2 cards
Certain revisions of the vbios on DCE3.2 cards have a bug
in the transmitter control table which prevents duallink from
being enabled properly on some cards.  The action switch statement
jumps to the wrong offset for the OUTPUT_ENABLE action.  The fix
is to use the ENABLE action rather than the OUTPUT_ENABLE action
on the affected cards.  In fixed version of the vbios, both
actions jump to the same offset, so the change should be safe.

Reported-and-tested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-20 09:52:24 +10:00
Ben Skeggs b16a5a18ff drm/nouveau: fix assumption that semaphore dmaobj is valid in x-chan sync
The DDX modifies DMA_SEMAPHORE on nv50 in order to implement sync-to-vblank,
things will go very wrong for cross-channel sync after this.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-18 14:56:24 +10:00
Ben Skeggs f66b3d5540 drm/nv50/disp: fix gamma with page flipping overlay turned on
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-18 14:38:45 +10:00
Emil Velikov 2905544073 drm/nouveau/pm: Prevent overflow in nouveau_perf_init()
While parsing the perf table, there is no check if
the num of entries read from the vbios is less than
the currently allocated number.

In case of a buggy vbios this will cause overwriting
of kernel memory, causing aditional problems.

Add a simple check in order to prevent the case

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-18 14:38:38 +10:00
Ben Skeggs 0897554cdd drm/nouveau: fix big-endian switch
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-18 14:38:27 +10:00
Daniel J Blueman 498e720b96 drm/i915: Fix gen6 (SNB) missed BLT ring interrupts.
The failure appeared in dmesg as:

[drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt
ring idle [waiting on 35064155, at 35064155], missed IRQ?

This works around that problem on by making the blitter command
streamer write interrupt state to the Hardware Status Page when a
MI_USER_INTERRUPT command is decoded, which appears to force the seqno
out to memory before the interrupt happens.

v1->v2: Moved to prior interrupt handler installation and RMW flags as
per feedback.
v2->v3: Removed RMW of flags (by anholt)

Cc: stable@kernel.org
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [v1]
Tested-by: Eric Anholt <eric@anholt.net> [v1,v3]
	   (incidence of the bug with a testcase went from avg 2/1000 to
	   0/12651 in the latest test run (plus more for v1))
Tested-by: Kenneth Graunke <kenneth@whitecape.org> [v1]
Tested-by: Robert Hooker <robert.hooker@canonical.com> [v1]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33394
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-18 08:25:16 +10:00
Alex Deucher b81157d016 drm/radeon/kms: use helper functions for fence read/write
The existing code assumed scratch registers in a number
of places while in most cases we are be using writeback
and events rather than scratch registers.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17 09:30:04 +10:00
Alex Deucher 11b0a5b89a drm/radeon/kms: set DP link config properly for DP bridges
DP clock and lanes were not set properly for DP bridges.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17 09:28:11 +10:00
Alex Deucher cc9f67a0a0 drm/radeon/kms/atom: AdjustPixelClock fixes for DP bridges
Need to set the external transmitter type properly in
AdjustPixelClock to get the properly output.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17 09:28:10 +10:00
Alex Deucher f89931f345 drm/radeon/kms: fix handling of DP to LVDS bridges
They need to be treated like eDP rather than DP.

May fix:
https://bugzilla.kernel.org/show_bug.cgi?id=34822

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17 09:28:07 +10:00
Alex Deucher d6c669528a drm/radeon/kms: issue blank/unblank commands for ext encoders
Required for DPMS on some systems.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17 09:28:05 +10:00
Alex Deucher 591a10e16c drm/radeon/kms: fix support for DDC on dp bridges
Need to set up the bridge for DDC prior to the
i2c over aux transaction.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17 09:28:03 +10:00
Alex Deucher d629a3ceb4 drm/radeon/kms: add support for load detection on dp bridges
dp to vga bridges for example.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17 09:28:02 +10:00
Alex Deucher 7ec478f835 drm/radeon/kms: add missing external encoder action
required for ddc.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17 09:28:01 +10:00
Alex Deucher fbb8777365 drm/radeon/kms: rework atombios_get_encoder_mode()
This should give us more reliable results if the table
is called before an active device is set.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17 09:27:59 +10:00
Alex Deucher ba7e05e958 drm/radeon/kms: fix num crtcs for Cedar and Caicos
Only support 4 rather than 6.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17 09:24:29 +10:00
Jean Delvare 826c7e4147 Revert "drm/i915: Enable GMBUS for post-gen2 chipsets"
Revert commit 8f9a3f9b63. This fixes a
hang when loading the eeprom driver (see bug #35572.) GMBUS will be
re-enabled later, differently.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reported-by: Marek Otahal <markotahal@gmail.com>
Tested-by: Yermandu Patapitafious <yermandu.dev@gmail.com>
Tested-by: Andrew Lutomirski <luto@mit.edu>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17 09:22:01 +10:00
Christian Dietrich cafe8d8413 drivers/gpu/drm: use printk_ratelimited instead of printk_ratelimit
Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited.

Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-16 16:32:15 +10:00
Dave Airlie 4a9a8b71e1 drm/radeon: workaround a hw bug on some radeon chipsets with all-0 EDIDs.
Some RS690 chipsets seem to end up with floating connectors, either
a DVI connector isn't actually populated, or an add-in HDMI card
is available but not installed. In this case we seem to get a NULL byte
response for each byte of the i2c transaction, so we detect this
case and if we see it we don't do anymore DDC transactions on this
connector.

I've tested this on my RS690 without the HDMI card installed and
it seems to work fine.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
2011-06-16 16:30:54 +10:00
Dave Airlie f49dadb82d drm: make debug levels match in edid failure code.
this puts the header and followup at the same loglevel as the
hex dump code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
2011-06-16 16:29:37 +10:00
Alex Deucher e6ba759980 drm/radeon/kms: clear wb memory by default
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-16 16:28:43 +10:00
Alex Deucher 7c88d2b80b drm/radeon/kms: be more pedantic about the g5 quirk (v2)
I don't think Apple offered any other cards for
this mac, so I doubt this will be an issue, but just
to be on the safe side, check the pci ids as well.

v2: fix spelling in commit message

Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Joachim Henke <j-o@users.sourceforge.net>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-16 16:27:28 +10:00
Alex Deucher 1c88d74f3a drm/radeon/kms: signed fix for evergreen thermal
temperature is signed.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-16 16:27:20 +10:00
Wolfram Sang 45e97ab650 drm: populate irq_by_busid-member for pci
Commit 8410ea (drm: rework PCI/platform driver interface) implemented
drm_pci_irq_by_busid() but forgot to make it available in the
drm_pci_bus-struct.

This caused a freeze on my Radeon9600-equipped laptop when executing glxgears.
Thanks to Michel for noticing the flaw.

[airlied: made function static also]

Reported-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-16 16:26:45 +10:00
Tormod Volden 66aa6962ff drm: Compare only lower 32 bits of framebuffer map offsets
Drivers using multiple framebuffers got broken by commit
41c2e75e60 which ignored the framebuffer
(or register) map offset when looking for existing maps. The rationale
was that the kernel-userspace ABI is fixed at a 32-bit offset, so the
real offsets could not always be handed over for comparison.

Instead of ignoring the offset we will compare the lower 32 bit. Drivers
using multiple framebuffers should just make sure that the lower 32 bit
are different. The existing drivers in question are practically limited
to 32-bit systems so that should be fine for them.

It is assumed that current drivers always specify a correct framebuffer
map offset, even if this offset was ignored since above commit. So this
patch should not change anything for drivers using only one framebuffer.

Drivers needing multiple framebuffers with 64-bit map offsets will need
to cook up something, for instance keeping an ID in the lower bit which
is to be aligned away when it comes to using the offset.

All of above applies to _DRM_REGISTERS as well.

Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-14 11:09:54 +10:00
Jesper Juhl b65552f06c drm/i915: Don't leak in i915_gem_shmem_pread_slow()
It seems to me that we are leaking 'user_pages' in
drivers/gpu/drm/i915/i915_gem.c::i915_gem_shmem_pread_slow() if
read_cache_page_gfp() fails.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-14 11:00:54 +10:00
Marek Olšák a27bb4b209 drm/radeon/kms: do bounds checking for 3D_LOAD_VBPNTR and bump array limit
To my knowledge, the limit is 16 on r300.
(the docs don't say what the limit is)

The lack of bounds checking can be abused to do all sorts of things
(from bypassing parts of the CS checker to crashing the kernel).

Bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=36745

Cc: stable@kernel.org
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-14 10:59:03 +10:00
Alex Deucher ab21e60bea drm/radeon/kms: fix mac g5 quirk
Apple uses the same subsystem pci ids for lots of
hardware much of which is wired up differently.  In
this case, the G5 imac and the G5 tower.

Only apply the quirk configuration to G5 towers.

Reported-by: Joachim Henke <j-o@users.sourceforge.net>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Joachim Henke <j-o@users.sourceforge.net>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-14 10:05:09 +10:00
Jay Estabrook 83533c132a alpha, drm: Remove obsolete Alpha support in MGA DRM code
Remove an obsolete Alpha adjustment in the drm for MGA on Alpha.

Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-14 09:32:56 +10:00
Jay Estabrook 82ba3fef67 alpha/drm: Cleanup Alpha support in DRM generic code
Remove an obsolete Alpha adjustment, and modify another,
to go with the current Alpha architecture support.

Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-14 09:31:37 +10:00
Greg Dietsche 96bf8bd1c9 savage: remove unnecessary if statement
the code always returns ret regardless, so if(ret) check is unnecessary.

v2: fixed up the spelling.

Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Reviewed-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-14 09:29:12 +10:00
Ilija Hadzic 303c805cb4 drm/radeon: fix GUI idle IH debug statements
debug statement for GUI idle interrupt is wrong and incorrectly
reports CP EOP interrupt; trivial issue, but confusing for
someone trying to distinguish interrupt sources while debugging
... fixed

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-09 14:36:48 +10:00
Alex Deucher b20f9bef8d drm/radeon/kms: check modes against max pixel clock
Filter out modes that are higher than the max pixel
clock.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-09 14:33:19 +10:00
Sascha Hauer 618c75e491 drm: fix fbs in DRM_IOCTL_MODE_GETRESOURCES ioctl
The DRM_IOCTL_MODE_GETRESOURCES ioctl just returns bogus framebuffers.
That is because the framebuffers for each file are in the filp_head
member of struct drm_framebuffer, not in the head member.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-09 14:31:09 +10:00
Alex Deucher 805c22168d drm/radeon/kms: disable hdmi audio by default
The current RE'd code causes blank screens and
display problems on a lot of systems.  So disable
it by default for now.  It can still be enabled
by setting the audio parameter to 1.  E.g.:
radeon.audio=1

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=38010
https://bugs.freedesktop.org/show_bug.cgi?id=27731
https://bugs.freedesktop.org/show_bug.cgi?id=35970
https://bugs.freedesktop.org/show_bug.cgi?id=26195
and many other reported problems.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-08 20:14:41 +10:00
Daniel Haid 62fff811d7 drm/radeon/kms: fix for radeon on systems >4GB without hardware iommu
On my x86_64 system with >4GB of ram and swiotlb instead of
a hardware iommu (because I have a VIA chipset), the call
to pci_set_dma_mask (see below) with 40bits returns an error.

But it seems that the radeon driver is designed to have
need_dma32 = true exactly if pci_set_dma_mask is called
with 32 bits and false if it is called with 40 bits.

I have read somewhere that the default are 32 bits. So if the
call fails I suppose that need_dma32 should be set to true.

And indeed the patch fixes the problem I have had before
and which I had described here:
http://choon.net/forum/read.php?21,106131,115940

Acked-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-08 20:14:28 +10:00
Dave Airlie 428c6e3630 drm/radeon/kms: set family for use in parser.
Wierdly the kms parser never initialised the family, it wasn't really used
much, but the fmt checker patch started using it and it fell over.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-08 20:08:46 +10:00
Linus Torvalds ef2398019b Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/nv40: fall back to paged dma object for the moment
  drm/nouveau: fix leak of gart mm node
  drm/nouveau: fix vram page mapping when crossing page table boundaries
  drm/nv17-nv40: Fix modesetting failure when pitch == 4096px (fdo bug 35901).
  drm/nouveau: don't create accel engine objects when noaccel=1
  drm/nvc0: recognise 0xdX chipsets as NV_C0
  drm/i915: Add a no lvds quirk for the Asus EeeBox PC EB1007
  drm/i915: Share the common force-audio property between connectors
  drm/i915: Remove unused enum "chip_family"
  drm/915: fix relaxed tiling on gen2: tile height
  drm/i915/crt: Explicitly return false if connected to a digital monitor
  drm/i915: Replace ironlake_compute_wm0 with g4x_compute_wm0
  drm/i915: Only print out the actual number of fences for i915_error_state
  drm/i915: s/addr & ~PAGE_MASK/offset_in_page(addr)/
  drm: i915: correct return status in intel_hdmi_mode_valid()
  drm/i915: fix regression after clock gating init split
  drm/i915: fix if statement in ivybridge irq handler
2011-06-07 19:09:26 -07:00
Linus Torvalds 12871a0bd6 Merge branch 'drm-radeon-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-radeon-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms/atom: fix PHY init
  drm/radeon/kms: add missing Evergreen texture formats to the CS parser
  drm/radeon/kms: viewport height has to be even
  drm/radeon/kms: remove duplicate reg from r600 safe regs
  drm/radeon/kms: add support for Llano Fusion APUs
  drm/radeon/kms: add llano pci ids
  drm/radeon/kms: fill in asic struct for llano
  drm/radeon/kms: add family ids for llano APUs
  drm/radeon: fix oops in ttm reserve when pageflipping (v2)
  drm/radeon/kms: clean up the radeon kms Kconfig
  drm/radeon/kms: fix thermal sensor reading on juniper
  drm/radeon/kms: add missing case for cayman thermal sensor
  drm/radeon/kms: add blit support for cayman (v2)
  drm/radeon/kms/blit: workaround some hw issues on evergreen+
2011-06-07 19:09:17 -07:00
Dave Airlie dcc32b838b Merge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next into drm-fixes
* 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next:
  drm/nv40: fall back to paged dma object for the moment
  drm/nouveau: fix leak of gart mm node
  drm/nouveau: fix vram page mapping when crossing page table boundaries
  drm/nv17-nv40: Fix modesetting failure when pitch == 4096px (fdo bug 35901).
  drm/nouveau: don't create accel engine objects when noaccel=1
  drm/nvc0: recognise 0xdX chipsets as NV_C0
2011-06-07 10:07:09 +10:00
Ben Skeggs 4cff3ce5fe drm/nv40: fall back to paged dma object for the moment
PCI(E)GART isn't quite stable it seems, fall back to old method until I get
the time to sort it out properly.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07 09:23:03 +10:00
Ben Skeggs 960bdba08e drm/nouveau: fix leak of gart mm node
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07 09:22:51 +10:00
Ben Skeggs 73c337e70e drm/nouveau: fix vram page mapping when crossing page table boundaries
Hopefully the cause of nvc0 "page jumping" issue.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07 09:22:48 +10:00
Francisco Jerez c1003d9c90 drm/nv17-nv40: Fix modesetting failure when pitch == 4096px (fdo bug 35901).
Reported-by: Mario Bachmann <grafgrimm77@gmx.de>
Tested-by: Greg Turner <gmturner007@ameritech.net>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07 09:22:29 +10:00
Ben Skeggs 18b54c4d58 drm/nouveau: don't create accel engine objects when noaccel=1
Fixes various potential oopses.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07 09:22:03 +10:00