Commit Graph

47 Commits

Author SHA1 Message Date
Al Viro a8cdc308c0 [PATCH] switch nbd
NB: nbd_ioctl() appears to be racy; BKL is held, but doesn't really
help, AFAICS.  Left as-is for now, but it'll need fixing.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:53 -04:00
Al Viro d4430d62fa [PATCH] beginning of methods conversion
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
	1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both.  That's this changeset.
	2) for each driver convert to new methods.  *ALL* drivers
are converted in this series.
	3) kill the old (renamed) methods.

Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain.  The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.

New methods:
	open(bdev, mode)
	release(disk, mode)
	ioctl(bdev, mode, cmd, arg)		/* Called without BKL */
	compat_ioctl(bdev, mode, cmd, arg)
	locked_ioctl(bdev, mode, cmd, arg)	/* Called with BKL, legacy */

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:32 -04:00
Parag Warudkar 01e8ef11bc x86: sysfs: kill owner field from attribute
Tejun's commit 7b595756ec made sysfs
attribute->owner unnecessary.  But the field was left in the structure to
ease the merge.  It's been over a year since that change and it is now
time to start killing attribute->owner along with its users - one arch at
a time!

This patch is attempt #1 to get rid of attribute->owner only for
CONFIG_X86_64 or CONFIG_X86_32 .  We will deal with other arches later on
as and when possible - avr32 will be the next since that is something I
can test.  Compile (make allyesconfig / make allmodconfig / custom config)
and boot tested.

akpm: the idea is that we put the declaration of sttribute.owner inside
`#ifndef CONFIG_X86'.  But that proved to be too ambitious for now because
new usages kept on turning up in subsystem trees.

[akpm: remove the ifdef for now]
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:42 -07:00
Tejun Heo ed9e198234 block: implement and use {disk|part}_to_dev()
Implement {disk|part}_to_dev() and use them to access generic device
instead of directly dereferencing {disk|part}->dev.  To make sure no
user is left behind, rename generic devices fields to __dev.

This is in preparation of unifying partition 0 handling with other
partitions.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:07 +02:00
Sven Wegener f3944d61dd nbd: fix memory leak of nbd_dev array
We leak the memory allocated for the nbd_dev array at multiple places.
Fix them by either adding a kfree() or by rearranging code to return
before we allocate the memory.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Cc: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-20 15:40:30 -07:00
Linus Torvalds bd5d435a96 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: Skip I/O merges when disabled
  block: add large command support
  block: replace sizeof(rq->cmd) with BLK_MAX_CDB
  ide: use blk_rq_init() to initialize the request
  block: use blk_rq_init() to initialize the request
  block: rename and export rq_init()
  block: no need to initialize rq->cmd with blk_get_request
  block: no need to initialize rq->cmd in prepare_flush_fn hook
  block/blk-barrier.c:blk_ordered_cur_seq() mustn't be inline
  block/elevator.c:elv_rq_merge_ok() mustn't be inline
  block: make queue flags non-atomic
  block: add dma alignment and padding support to blk_rq_map_kern
  unexport blk_max_pfn
  ps3disk: Remove superfluous cast
  block: make rq_init() do a full memset()
  relay: fix splice problem
2008-04-29 08:18:03 -07:00
Hirofumi Nakagawa 801678c5a3 Remove duplicated unlikely() in IS_ERR()
Some drivers have duplicated unlikely() macros.  IS_ERR() already has
unlikely() in itself.

This patch cleans up such pointless code.

Signed-off-by: Hirofumi Nakagawa <hnakagawa@miraclelinux.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:25 -07:00
Laurent Vivier d71a6d7332 NBD: add partition support
Permit the use of partitions with network block devices (NBD).

A new parameter is introduced to define how many partition we want to be able
to manage per network block device.  This parameter is "max_part".

For instance, to manage 63 partitions / loop device, we will do:

   [on the server side]
# nbd-server 1234 /dev/sdb
   [on the client side]
# modprobe nbd max_part=63
# ls -l /dev/nbd*
brw-rw---- 1 root disk 43,   0 2008-03-25 11:14 /dev/nbd0
brw-rw---- 1 root disk 43,  64 2008-03-25 11:11 /dev/nbd1
brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10
brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11
brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12
brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13
brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14
brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15
brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2
brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3
brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4
brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5
brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6
brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7
brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8
brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9
# nbd-client localhost 1234 /dev/nbd0
Negotiation: ..size = 80418240KB
bs=1024, sz=80418240

-------NOTE, RFC: partition table is not automatically read.
The driver sets bdev->bd_invalidated to 1 to force the read of the partition
table of the device, but this is done only on an open of the device.
So we have to do a "touch /dev/nbdX" or something like that.
It can't be done from the nbd-client or nbd driver because at this
level we can't ask to read the partition table and to serve the request
at the same time (-> deadlock)

If someone has a better idea, I'm open to any suggestion.
-------NOTE, RFC

# fdisk -l /dev/nbd0

Disk /dev/nbd0: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

     Device Boot      Start         End      Blocks   Id  System
/dev/nbd0p1   *           1        9965    80043831   83  Linux
/dev/nbd0p2            9966       10011      369495    5  Extended
/dev/nbd0p5            9966       10011      369463+  82  Linux swap / Solaris

# ls -l /dev/nbd0*
brw-rw---- 1 root disk 43,   0 2008-03-25 11:16 /dev/nbd0
brw-rw---- 1 root disk 43,   1 2008-03-25 11:16 /dev/nbd0p1
brw-rw---- 1 root disk 43,   2 2008-03-25 11:16 /dev/nbd0p2
brw-rw---- 1 root disk 43,   5 2008-03-25 11:16 /dev/nbd0p5
# mount /dev/nbd0p1 /mnt
# ls /mnt
bin    dev   initrd      lost+found  opt   sbin     sys  var
boot   etc   initrd.img  media       proc  selinux  tmp  vmlinuz
cdrom  home  lib         mnt         root  srv      usr
# umount /mnt
# nbd-client -d /dev/nbd0
# ls -l /dev/nbd0*
brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0
-------NOTE
On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table:
as the size of the device is 0, we don't have to serve the partition manager
request (-> no deadlock).
-------NOTE

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:23 -07:00
Laurent Vivier 48cf6061b3 NBD: allow nbd to be used locally
This patch allows Network Block Device to be mounted locally (nbd-client to
nbd-server over 127.0.0.1).

It creates a kthread to avoid the deadlock described in NBD tools
documentation.  So, if nbd-client hangs waiting for pages, the kblockd thread
can continue its work and free pages.

I have tested the patch to verify that it avoids the hang that always occurs
when writing to a localhost nbd connection.  I have also tested to verify that
no performance degradation results from the additional thread and queue.

Patch originally from Laurent Vivier.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:23 -07:00
FUJITA Tomonori 4f54eec831 block: use blk_rq_init() to initialize the request
Any path needs to call it to initialize the request.

This is a preparation for large command support, which needs to
initialize the request in a proper way (that is, just doing a memset()
will not work).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29 14:48:55 +02:00
Mike Snitzer ffc41cf8db nbd: prevent sock_xmit from attempting to use a NULL socket
NBD does not protect the nbd_device's socket from becoming NULL during
receives.

This closes a race with the NBD_CLEAR_SOCK ioctl (nbd-client -d) setting
the nbd_device's socket to NULL right before NBD calls sock_xmit.

Signed-off-by: Mike Snitzer <snitzer@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02 15:28:19 -07:00
Paul Clements 48f15b93b2 NBD: make nbd default to deadline I/O scheduler
NBD doesn't work well with CFQ (or AS) schedulers, so let's default to
something else.

The two problems I have experienced with nbd and cfq are:

1) nbd hangs with cfq on RHEL 5 (2.6.18) -- this may well have been
   fixed

   There's a similar debian bug that has been filed as well:

   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=447638

   There have been posts to nbd-general mailing list about problems with
   cfq and nbd also.

2) nbd performs about 10% better (the last time I tested) with deadline
   vs.  cfq (the overhead of cfq doesn't provide much advantage to nbd [not
   being a real disk], and you end up going through the I/O scheduler on
   the nbd server anyway, so it makes sense that deadline is better with
   nbd)

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 17:12:15 -08:00
Paul Clements 20a8143eaa NBD: remove limit on max number of nbd devices
Remove the arbitrary 128 device limit for NBD.  nbds_max can now be set to
any number.  In certain scenarios where devices are used sparsely we have
run into the 128 device limit.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:41 -08:00
Kiyoshi Ueda 097c94a4e8 blk_end_request: changing nbd (take 4)
This patch converts nbd to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

Cc: Paul Clements <Paul.Clements@steeleye.com>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:37 +01:00
Kay Sievers edfaa7c365 Driver core: convert block from raw kobjects to core devices
This moves the block devices to /sys/class/block. It will create a
flat list of all block devices, with the disks and partitions in one
directory. For compatibility /sys/block is created and contains symlinks
to the disks.

  /sys/class/block
  |-- sda -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
  |-- sda1 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
  |-- sda10 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda10
  |-- sda5 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
  |-- sda6 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
  |-- sda7 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
  |-- sda8 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8
  |-- sda9 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9
  `-- sr0 -> ../../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0

  /sys/block/
  |-- sda -> ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
  `-- sr0 -> ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:36 -08:00
Trond Myklebust 91cf45f02a [NET]: Add the helper kernel_sock_shutdown()
...and fix a couple of bugs in the NBD, CIFS and OCFS2 socket handlers.

Looking at the sock->op->shutdown() handlers, it looks as if all of them
take a SHUT_RD/SHUT_WR/SHUT_RDWR argument instead of the
RCV_SHUTDOWN/SEND_SHUTDOWN arguments.
Add a helper, and then define the SHUT_* enum to ensure that kernel users
of shutdown() don't get confused.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Mark Fasheh <mark.fasheh@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 18:10:39 -08:00
Denis Cheng d489202ea2 remove unused return within void return function
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 02:18:21 +02:00
Pavel Emelyanov ba25f9dcc4 Use helpers to obtain task pid in printks
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Paul Clements 7fdfd4065c NBD: allow hung network I/O to be cancelled
Allow NBD I/O to be cancelled when a network outage occurs.  Previously, I/O
would just hang, and if enough I/O was hung in nbd, the system (at least
user-level) would completely hang until a TCP timeout (default, 15 minutes)
occurred.

The patch introduces a new ioctl NBD_SET_TIMEOUT that allows a transmit
timeout value (in seconds) to be specified.  Any network send that exceeds the
timeout will be cancelled and the nbd connection will be shut down.  I've
tested with various timeout values and 6 seconds seems to be a good choice for
the timeout.  If the NBD_SET_TIMEOUT ioctl is not called, you get the old (I/O
hang) behavior.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Paul Clements 4b86a87256 NBD: set uninitialized devices to size 0
This fixes errors with utilities (such as LVM's vgscan) that try to scan all
devices.  Previously this would generate read errors when uninitialized nbd
devices were scanned:

# vgscan
   Reading all physical volumes.  This may take a while...
   /dev/nbd0: read failed after 0 of 1024 at 0: Input/output error
   /dev/nbd0: read failed after 0 of 1024 at 509804544: Input/output error
   /dev/nbd0: read failed after 0 of 2048 at 0: Input/output error
   /dev/nbd1: read failed after 0 of 1024 at 509804544: Input/output error
   /dev/nbd1: read failed after 0 of 2048 at 0: Input/output error

 From now on, uninitialized nbd devices will have size zero, which
prevents these errors.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Denis Cheng 0cbc591bf8 nbd: change a parameter's type to remove a memcpy call
This memcpy looks so strange, in fact it's merely a pointer dereference, so I
change the parameter's type to refer it more directly, this could make the
memcpy not needed anymore.

In the function nbd_read_stat where nbd_find_request is only once called, the
parameter served should be transformed accordingly.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:47 -07:00
Denis Cheng d2c9740b49 nbd: use list_for_each_entry_safe to make it more consolidated and readable
Thus the traverse of the loop may delete nodes, use the safe version.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:47 -07:00
Jens Axboe 6c92e699b5 Fixup rq_for_each_segment() indentation
Remove one level of nesting where appropriate.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:56 +02:00
NeilBrown 5705f70217 Introduce rq_for_each_segment replacing rq_for_each_bio
Every usage of rq_for_each_bio wraps a usage of
bio_for_each_segment, so these can be combined into
rq_for_each_segment.

We define "struct req_iterator" to hold the 'bio' and 'index' that
are needed for the double iteration.

Signed-off-by: Neil Brown <neilb@suse.de>

Various compile fixes by me...

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:56 +02:00
Jens Axboe 165125e1e4 [BLOCK] Get rid of request_queue_t typedef
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24 09:28:11 +02:00
Oleg Nesterov be0ef957c9 nbd.c: sock_xmit: cleanup signal related code
sock_xmit() re-implements sigprocmask() and dequeue_signal_lock().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:50 -07:00
Boaz Harrosh e654bc4393 [PATCH] fix request->cmd == INT cases
- I have unearthed very old bugs in stale drivers that still
   used request->cmd as a READ|WRITE int
 - This patch is maybe a proof that these drivers have not been
   used for a long time. Should they be removed completely?

Drivers that currently do not work for sure:
 drivers/acorn/block/fd1772.c |    2 +-
 drivers/acorn/block/mfmhd.c  |    8 ++++----
 drivers/cdrom/aztcd.c        |    2 +-
 drivers/cdrom/cm206.c        |    2 +-
 drivers/cdrom/gscd.c         |    2 +-
 drivers/cdrom/mcdx.c         |    2 +-
 drivers/cdrom/optcd.c        |    2 +-
 drivers/cdrom/sjcd.c         |    2 +-

Drivers with cosmetic fixes only:
  b/drivers/block/amiflop.c
  b/drivers/block/nbd.c
  b/drivers/ide/legacy/hd.c

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10 08:03:34 +02:00
WANG Cong 84963048ca nbd: check the return value of sysfs_create_file
[akpm@linux-foundation.org: fix it]
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:49 -07:00
Josef Sipek 17506041de [PATCH] struct path: convert nbd
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:47 -08:00
Paul Clements 6b39bb6548 [PATCH] nbd: show nbd client pid in sysfs
Allow nbd to expose the nbd-client daemon's PID in /sys/block/nbd<x>/pid.

This is helpful for tracking connection status of a device and for
determining which nbd devices are currently in use.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:47 -08:00
Jens Axboe 4aff5e2333 [PATCH] Split struct request ->flags into two parts
Right now ->flags is a bit of a mess: some are request types, and
others are just modifiers. Clean this up by splitting it into
->cmd_type and ->cmd_flags. This allows introduction of generic
Linux block message types, useful for sending generic Linux commands
to block devices.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:23:37 +02:00
Michal Feix f0df33bcab [PATCH] nbd: Abort request on data reception failure
When reading from nbd device, we need to receive all the data after
receiving reply packet from the server - otherwise such request will never
be ended.

If socket is closed right after accepting reply control packet and in the
middle of waiting for read data, nbd_read_stat() returns NULL and
nbd_end_request() is not called.

This patch fixes it.

Signed-off-by: Michal Feix <michal@feix.cz>
Acked-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-31 13:28:39 -07:00
Michal Feix e4b57e0842 [PATCH] nbd: Check magic before doing anything else
We should check magic sequence in reply packet before trying to find
request with it's request handle.  This also solves the problem with
"Unexpected reply" message beeing logged, when packet with invalid magic is
received.

Signed-off-by: Michal Feix <michal@feix.cz>
Acked-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-31 13:28:39 -07:00
Ingo van Lil 9c7a41691f [PATCH] drivers/block/nbd.c compile fix
The Network Block Device driver doesn't compile if NDEBUG is defined.

Signed-off-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:04 -07:00
Greg Kroah-Hartman ce7b0f46bb [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
And remove the now unneeded number field.
Also fixes all drivers that set these fields.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Greg Kroah-Hartman ff23eca3e8 [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
Also fixes up all files that #include it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Greg Kroah-Hartman 8ab5e4c15b [PATCH] devfs: Remove devfs_remove() function from the kernel tree
Removes the devfs_remove() function and all callers of it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:07 -07:00
Greg Kroah-Hartman 95dc112a57 [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree
Removes the devfs_mk_dir() function and all callers of it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:06 -07:00
Pavel Machek dbf492d6c1 [PATCH] nbd: kill obsolete changelog, add GPL
nbd abuses file header as a changelog (and obsolete one, too), and fails to
mention GPL.  This fixes it.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: <Paul.Clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:06 -07:00
Adrian Bunk 5b7b18ccde [PATCH] drivers/block/nbd.c: don't defer compile error to runtime
If we can detect a problem at compile time, the compilation should fail.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:52 -08:00
Ingo Molnar 82d4dc5adb [PATCH] sem2mutex: drivers/block/nbd.c
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:13 -08:00
taneli.vahakangas@netsonic.fi 9fa37fd162 [PATCH] nbd: remove duplicate assignment
<stuartm@connecttech.com>

Sent by Paul Clements <paul.clements@steeleye.com>, who needs to read
Documentation/SubmittingPatches..

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:54 -08:00
Linus Torvalds d99cf9d679 Merge branch 'post-2.6.15' of git://brick.kernel.dk/data/git/linux-2.6-block
Manual fixup for merge with Jens' "Suspend support for libata", commit
ID 9b84754866.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 09:01:25 -08:00
Herbert Xu 4b2f0260c7 [PATCH] nbd: fix TX/RX race condition
Janos Haar of First NetCenter Bt.  reported numerous crashes involving the
NBD driver.  With his help, this was tracked down to bogus bio vectors
which in turn was the result of a race condition between the
receive/transmit routines in the NBD driver.

The bug manifests itself like this:

CPU0				CPU1
do_nbd_request
	add req to queuelist
	nbd_send_request
		send req head
		for each bio
			kmap
			send
				nbd_read_stat
					nbd_find_request
					nbd_end_request
			kunmap

When CPU1 finishes nbd_end_request, the request and all its associated
bio's are freed.  So when CPU0 calls kunmap whose argument is derived from
the last bio, it may crash.

Under normal circumstances, the race occurs only on the last bio.  However,
if an error is encountered on the remote NBD server (such as an incorrect
magic number in the request), or if there were a bug in the server, it is
possible for the nbd_end_request to occur any time after the request's
addition to the queuelist.

The following patch fixes this problem by making sure that requests are not
added to the queuelist until after they have been completed transmission.

In order for the receiving side to be ready for responses involving
requests still being transmitted, the patch introduces the concept of the
active request.

When a response matches the current active request, its processing is
delayed until after the tranmission has come to a stop.

This has been tested by Janos and it has been successful in curing this
race condition.

From: Herbert Xu <herbert@gondor.apana.org.au>

  Here is an updated patch which removes the active_req wait in
  nbd_clear_queue and the associated memory barrier.

  I've also clarified this in the comment.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: <djani22@dynamicweb.hu>
Cc: Paul Clements <Paul.Clements@SteelEye.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:20 -08:00
Tejun Heo 8ffdc6550c [BLOCK] add @uptodate to end_that_request_last() and @error to rq_end_io_fn()
add @uptodate argument to end_that_request_last() and @error
to rq_end_io_fn().  there's no generic way to pass error code
to request completion function, making generic error handling
of non-fs request difficult (rq->errors is driver-specific and
each driver uses it differently).  this patch adds @uptodate
to end_that_request_last() and @error to rq_end_io_fn().

for fs requests, this doesn't really matter, so just using the
same uptodate argument used in the last call to
end_that_request_first() should suffice.  imho, this can also
help the generic command-carrying request jens is working on.

Signed-off-by: tejun heo <htejun@gmail.com>
Signed-Off-By: Jens Axboe <axboe@suse.de>
2006-01-06 09:49:03 +01:00
Lars Marowsky-Bree 40be0c28b3 [PATCH] nbd: Don't create all MAX_NBD devices by default all the time
This patches adds the "nbds_max" parameter to the nbd kernel module, which
limits the number of nbds allocated.  Previously, always all 128 entries
were allocated unconditionally, which used to waste resources and
needlessly flood the hotplug system with events.  (Defaults to 16 now.)

Signed-off-by: Lars Marowsky-Bree <lmb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:07 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00