Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
-----BEGIN PGP SIGNATURE-----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=ch+z
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20180130' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A small pull request this time, just three patches, and one of these
is just a comment update (swap the FSF physical address for a URL).
The other two patches are small bug fixes found by szybot/syzkaller;
they individual patch descriptions should tell you all you ever wanted
to know"
* tag 'selinux-pr-20180130' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: skip bounded transition processing if the policy isn't loaded
selinux: ensure the context is NUL terminated in security_context_to_sid_core()
security: replace FSF address with web source in license notices
We can't do anything reasonable in security_bounded_transition() if we
don't have a policy loaded, and in fact we could run into problems
with some of the code inside expecting a policy. Fix these problems
like we do many others in security/selinux/ss/services.c by checking
to see if the policy is loaded (ss_initialized) and returning quickly
if it isn't.
Reported-by: syzbot <syzkaller-bugs@googlegroups.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Only IPSEC routes have a non-NULL dst->child pointer. And IPSEC
routes are identified by a non-NULL dst->xfrm pointer.
Signed-off-by: David S. Miller <davem@davemloft.net>
The syzbot/syzkaller automated tests found a problem in
security_context_to_sid_core() during early boot (before we load the
SELinux policy) where we could potentially feed context strings without
NUL terminators into the strcmp() function.
We already guard against this during normal operation (after the SELinux
policy has been loaded) by making a copy of the context strings and
explicitly adding a NUL terminator to the end. The patch extends this
protection to the early boot case (no loaded policy) by moving the context
copy earlier in security_context_to_sid_core().
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reviewed-By: William Roberts <william.c.roberts@intel.com>
A few years ago the FSF moved and "59 Temple Place" is wrong. Having this
still in our source files feels old and unmaintained.
Let's take the license statement serious and not confuse users.
As https://www.gnu.org/licenses/gpl-howto.html suggests, we replace the
postal address with "<http://www.gnu.org/licenses/>" in the security
directory.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=VtxX
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux updates from Paul Moore:
"Seven SELinux patches for v4.15, although five of the seven are small
build fixes and cleanups.
Of the remaining two patches, the only one worth really calling out is
Eric's fix for the SELinux filesystem xattr set/remove code; the other
patch simply converts the SELinux hash table implementation to use
kmem_cache.
Eric's setxattr/removexattr tweak converts SELinux back to calling the
commoncap implementations when the xattr is not SELinux related. The
immediate win is to fixup filesystem capabilities in user namespaces,
but it makes things a bit saner overall; more information in the
commit description"
* tag 'selinux-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: remove extraneous initialization of slots_used and max_chain_len
selinux: remove redundant assignment to len
selinux: remove redundant assignment to str
selinux: fix build warning
selinux: fix build warning by removing the unused sid variable
selinux: Perform both commoncap and selinux xattr checks
selinux: Use kmem_cache for hashtab_node
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a bpf object related check when sending and receiving files
through unix domain socket as well as binder. It checks if the receiving
process have privilege to read/write the bpf map or use the bpf program.
This check is necessary because the bpf maps and programs are using a
anonymous inode as their shared inode so the normal way of checking the
files and sockets when passing between processes cannot work properly on
eBPF object. This check only works when the BPF_SYSCALL is configured.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the actual checks introduced to eBPF related syscalls. This
implementation use the security field inside bpf object to store a sid that
identify the bpf object. And when processes try to access the object,
selinux will check if processes have the right privileges. The creation
of eBPF object are also checked at the general bpf check hook and new
cmd introduced to eBPF domain can also be checked there.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variables slots_used and max_chain_len are being initialized to zero
twice. Remove the second set of initializations in the for loop.
Cleans up the clang warnings:
Value stored to 'slots_used' is never read
Value stored to 'max_chain_len' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The variable len is being set to zero and this value is never
being read since len is being set to a different value just
a few lines later. Remove this redundant assignment. Cleans
up clang warning: Value stored to 'len' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
str is being assigned to an empty string but str is never being
read after that, so the assignment is redundant and can be removed.
Moving the declaration of str to a more localised block, cleans up
clang warning: "Value stored to 'str' is never read"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch make selinux_task_prlimit() static since it is not used
anywhere else.
This fix the following build warning:
security/selinux/hooks.c:3981:5: warning: no previous prototype for 'selinux_task_prlimit' [-Wmissing-prototypes]
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch remove the unused variable sid
This fix the following build warning:
security/selinux/hooks.c:2921:6: warning: variable 'sid' set but not used [-Wunused-but-set-variable]
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When selinux is loaded the relax permission checks for writing
security.capable are not honored. Which keeps file capabilities
from being used in user namespaces.
Stephen Smalley <sds@tycho.nsa.gov> writes:
> Originally SELinux called the cap functions directly since there was no
> stacking support in the infrastructure and one had to manually stack a
> secondary module internally. inode_setxattr and inode_removexattr
> however were special cases because the cap functions would check
> CAP_SYS_ADMIN for any non-capability attributes in the security.*
> namespace, and we don't want to impose that requirement on setting
> security.selinux. Thus, we inlined the capabilities logic into the
> selinux hook functions and adapted it appropriately.
Now that the permission checks in commoncap have evolved this
inlining of their contents has become a problem. So restructure
selinux_inode_removexattr, and selinux_inode_setxattr to call
both the corresponding cap_inode_ function and dentry_has_perm
when the attribute is not a selinux security xattr. This ensures
the policies of both commoncap and selinux are enforced.
This results in smack and selinux having the same basic structure
for setxattr and removexattr. Performing their own special permission
checks when it is their modules xattr being written to, and deferring
to commoncap when that is not the case. Then finally performing their
generic module policy on all xattr writes.
This structure is fine when you only consider stacking with the
commoncap lsm, but it becomes a problem if two lsms that don't want
the commoncap security checks on their own attributes need to be
stack. This means there will need to be updates in the future as lsm
stacking is improved, but at least now the structure between smack and
selinux is common making the code easier to refactor.
This change also has the effect that selinux_linux_setotherxattr becomes
unnecessary so it is removed.
Fixes: 8db6c34f1d ("Introduce v3 namespaced file capabilities")
Fixes: 7bbf0e052b76 ("[PATCH] selinux merge")
Historical Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
During random test as own device to check slub account,
we found some slack memory from hashtab_node(kmalloc-64).
By using kzalloc(), middle of test result like below:
allocated size 240768
request size 45144
slack size 195624
allocation count 3762
So, we want to use kmem_cache_zalloc() and that
can reduce memory size 52byte(slack size/alloc count) per each struct.
Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=/6oy
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20170831' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A relatively quiet period for SELinux, 11 patches with only two/three
having any substantive changes.
These noteworthy changes include another tweak to the NNP/nosuid
handling, per-file labeling for cgroups, and an object class fix for
AF_UNIX/SOCK_RAW sockets; the rest of the changes are minor tweaks or
administrative updates (Stephen's email update explains the file
explosion in the diffstat).
Everything passes the selinux-testsuite"
[ Also a couple of small patches from the security tree from Tetsuo
Handa for Tomoyo and LSM cleanup. The separation of security policy
updates wasn't all that clean - Linus ]
* tag 'selinux-pr-20170831' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: constify nf_hook_ops
selinux: allow per-file labeling for cgroupfs
lsm_audit: update my email address
selinux: update my email address
MAINTAINERS: update the NetLabel and Labeled Networking information
selinux: use GFP_NOWAIT in the AVC kmem_caches
selinux: Generalize support for NNP/nosuid SELinux domain transitions
selinux: genheaders should fail if too many permissions are defined
selinux: update the selinux info in MAINTAINERS
credits: update Paul Moore's info
selinux: Assign proper class to PF_UNIX/SOCK_RAW sockets
tomoyo: Update URLs in Documentation/admin-guide/LSM/tomoyo.rst
LSM: Remove security_task_create() hook.
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEEcQCq365ubpQNLgrWVeRaWujKfIoFAlmxqfYUHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQVeRaWujKfIqajw//dDczulHzGe/bicB9dGR9qLurWn3m
lCsNl3eAhNlcoPGeEgmEMpqlAf8HEwi8am4RnL3XfHKVGtgBIA+K8Hmm7AXI2YTp
8ZU6aRK+nW2gD+vFz6D0oknsx3wx9GtHutCeDEHKdiaTRL0RyYr9o3NgU2ngAF09
Pg5rJadd5DxVyrHKImpJTZNIvI96BIzXLV7OrYLu59dLKW8lMWZ4ZGz3v+QDO4tu
1bNPkM1uwcPUamen3R1O0W8GUIIOgTDzKIvrgKLV3aziyVtAIbUvkUaa7El3v8/K
Fsefjwp96AxLw1wQibKafm63Zx9V7e5cqA7ALyqCGWXW2DR+uV0mpQiKOAZO6OqQ
g7fTKxoMRjjX22OkYxBBbYqKDM8Pi4iH41tZJ7dw7Q9/U+dLwlwitf8WdPspSeMo
E9Ng9EgfUAfFZuHcTXobM1XKZos1t8UE8HIDbmr+Ono5w4LqdEws94+uLLNKI4Og
s3022Nah8RG8zzgGSsJCqsJkuxpv9Hm4qrt28mIj+PVMsa6GtBDsOe9PgMts4XEx
PW3Yy9Jt7UcDr31sMHF/EqMe9wIGkwCsNVTWCGW5g5vLxsVYv9q++pfn8qcP1m+K
kCkbi2HwgOLFrOsA+YDJ6+5V0+IqLkegjSpnCm/S95szrVu6xif1KIj4JFCClUEy
5xJ/3pxz6hF4DMM=
=in0T
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20170907' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"A small pull request for audit this time, only four patches and only
two with any real code changes.
Those two changes are the removal of a pointless SELinux AVC
initialization audit event and a fix to improve the audit timestamp
overhead.
The other two patches are comment cleanup and administrative updates,
nothing very exciting.
Everything passes our tests"
* tag 'audit-pr-20170907' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: update the function comments
selinux: remove AVC init audit log message
audit: update the audit info in MAINTAINERS
audit: Reduce overhead using a coarse clock
running set*id processes. To do this, the bprm_secureexec LSM hook is
collapsed into the bprm_set_creds hook so the secureexec-ness of an exec
can be determined early enough to make decisions about rlimits and the
resulting memory layouts. Other logic acting on the secureexec-ness of an
exec is similarly consolidated. Capabilities needed some special handling,
but the refactoring removed other special handling, so that was a wash.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=Yva4
-----END PGP SIGNATURE-----
Merge tag 'secureexec-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull secureexec update from Kees Cook:
"This series has the ultimate goal of providing a sane stack rlimit
when running set*id processes.
To do this, the bprm_secureexec LSM hook is collapsed into the
bprm_set_creds hook so the secureexec-ness of an exec can be
determined early enough to make decisions about rlimits and the
resulting memory layouts. Other logic acting on the secureexec-ness of
an exec is similarly consolidated. Capabilities needed some special
handling, but the refactoring removed other special handling, so that
was a wash"
* tag 'secureexec-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
exec: Consolidate pdeath_signal clearing
exec: Use sane stack rlimit under secureexec
exec: Consolidate dumpability logic
smack: Remove redundant pdeath_signal clearing
exec: Use secureexec for clearing pdeath_signal
exec: Use secureexec for setting dumpability
LSM: drop bprm_secureexec hook
commoncap: Move cap_elevated calculation into bprm_set_creds
commoncap: Refactor to remove bprm_secureexec hook
smack: Refactor to remove bprm_secureexec hook
selinux: Refactor to remove bprm_secureexec hook
apparmor: Refactor to remove bprm_secureexec hook
binfmt: Introduce secureexec flag
exec: Correct comments about "point of no return"
exec: Rename bprm->cred_prepared to called_set_creds
In the process of normalizing audit log messages, it was noticed that the AVC
initialization code registered an audit log KERNEL record that didn't fit the
standard format. In the process of attempting to normalize it it was
determined that this record was not even necessary. Remove it.
Ref: http://marc.info/?l=selinux&m=149614868525826&w=2
See: https://github.com/linux-audit/audit-kernel/issues/48
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
nf_hook_ops are not supposed to change at runtime. nf_register_net_hooks
and nf_unregister_net_hooks are working with const nf_hook_ops.
So mark the non-const nf_hook_ops structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch allows genfscon per-file labeling for cgroupfs. For instance,
this allows to label the "release_agent" file within each
cgroup mount and limit writes to it.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
[PM: subject line and merge tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Update my email address since epoch.ncsc.mil no longer exists.
MAINTAINERS and CREDITS are already correct.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
There is a strange __GFP_NOMEMALLOC usage pattern in SELinux,
specifically GFP_ATOMIC | __GFP_NOMEMALLOC which doesn't make much
sense. GFP_ATOMIC on its own allows to access memory reserves while
__GFP_NOMEMALLOC dictates we cannot use memory reserves. Replace this
with the much more sane GFP_NOWAIT in the AVC code as we can tolerate
memory allocation failures in that code.
Signed-off-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
As systemd ramps up enabling NNP (NoNewPrivileges) for system services,
it is increasingly breaking SELinux domain transitions for those services
and their descendants. systemd enables NNP not only for services whose
unit files explicitly specify NoNewPrivileges=yes but also for services
whose unit files specify any of the following options in combination with
running without CAP_SYS_ADMIN (e.g. specifying User= or a
CapabilityBoundingSet= without CAP_SYS_ADMIN): SystemCallFilter=,
SystemCallArchitectures=, RestrictAddressFamilies=, RestrictNamespaces=,
PrivateDevices=, ProtectKernelTunables=, ProtectKernelModules=,
MemoryDenyWriteExecute=, or RestrictRealtime= as per the systemd.exec(5)
man page.
The end result is bad for the security of both SELinux-disabled and
SELinux-enabled systems. Packagers have to turn off these
options in the unit files to preserve SELinux domain transitions. For
users who choose to disable SELinux, this means that they miss out on
at least having the systemd-supported protections. For users who keep
SELinux enabled, they may still be missing out on some protections
because it isn't necessarily guaranteed that the SELinux policy for
that service provides the same protections in all cases.
commit 7b0d0b40cd ("selinux: Permit bounded transitions under
NO_NEW_PRIVS or NOSUID.") allowed bounded transitions under NNP in
order to support limited usage for sandboxing programs. However,
defining typebounds for all of the affected service domains
is impractical to implement in policy, since typebounds requires us
to ensure that each domain is allowed everything all of its descendant
domains are allowed, and this has to be repeated for the entire chain
of domain transitions. There is no way to clone all allow rules from
descendants to their ancestors in policy currently, and doing so would
be undesirable even if it were practical, as it requires leaking
permissions to objects and operations into ancestor domains that could
weaken their own security in order to allow them to the descendants
(e.g. if a descendant requires execmem permission, then so do all of
its ancestors; if a descendant requires execute permission to a file,
then so do all of its ancestors; if a descendant requires read to a
symbolic link or temporary file, then so do all of its ancestors...).
SELinux domains are intentionally not hierarchical / bounded in this
manner normally, and making them so would undermine their protections
and least privilege.
We have long had a similar tension with SELinux transitions and nosuid
mounts, albeit not as severe. Users often have had to choose between
retaining nosuid on a mount and allowing SELinux domain transitions on
files within those mounts. This likewise leads to unfortunate tradeoffs
in security.
Decouple NNP/nosuid from SELinux transitions, so that we don't have to
make a choice between them. Introduce a nnp_nosuid_transition policy
capability that enables transitions under NNP/nosuid to be based on
a permission (nnp_transition for NNP; nosuid_transition for nosuid)
between the old and new contexts in addition to the current support
for bounded transitions. Domain transitions can then be allowed in
policy without requiring the parent to be a strict superset of all of
its children.
With this change, systemd unit files can be left unmodified from upstream.
SELinux-disabled and SELinux-enabled users will benefit from retaining any
of the systemd-provided protections. SELinux policy will only need to
be adapted to enable the new policy capability and to allow the
new permissions between domain pairs as appropriate.
NB: Allowing nnp_transition between two contexts opens up the potential
for the old context to subvert the new context by installing seccomp
filters before the execve. Allowing nosuid_transition between two contexts
opens up the potential for a context transition to occur on a file from
an untrusted filesystem (e.g. removable media or remote filesystem). Use
with care.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The SELinux bprm_secureexec hook can be merged with the bprm_set_creds
hook since it's dealing with the same information, and all of the details
are finalized during the first call to the bprm_set_creds hook via
prepare_binprm() (subsequent calls due to binfmt_script, etc, are ignored
via bprm->called_set_creds).
Here, the test can just happen at the end of the bprm_set_creds hook,
and the bprm_secureexec hook can be dropped.
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Tested-by: Paul Moore <paul@paul-moore.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
The cred_prepared bprm flag has a misleading name. It has nothing to do
with the bprm_prepare_cred hook, and actually tracks if bprm_set_creds has
been called. Rename this flag and improve its comment.
Cc: David Howells <dhowells@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
We no longer place these on a list so they can be const.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For PF_UNIX, SOCK_RAW is synonymous with SOCK_DGRAM (cf.
net/unix/af_unix.c). This is a tad obscure, but libpcap uses it.
Signed-off-by: Luis Ressel <aranea@aixah.de>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
After rcu conversions performance degradation in forward tests isn't that
noticeable anymore.
See next patch for some numbers.
A followup patcg could then also remove genid from the policies
as we do not cache bundles anymore.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
Pull security layer updates from James Morris:
- a major update for AppArmor. From JJ:
* several bug fixes and cleanups
* the patch to add symlink support to securityfs that was floated
on the list earlier and the apparmorfs changes that make use of
securityfs symlinks
* it introduces the domain labeling base code that Ubuntu has been
carrying for several years, with several cleanups applied. And it
converts the current mediation over to using the domain labeling
base, which brings domain stacking support with it. This finally
will bring the base upstream code in line with Ubuntu and provide
a base to upstream the new feature work that Ubuntu carries.
* This does _not_ contain any of the newer apparmor mediation
features/controls (mount, signals, network, keys, ...) that
Ubuntu is currently carrying, all of which will be RFC'd on top
of this.
- Notable also is the Infiniband work in SELinux, and the new file:map
permission. From Paul:
"While we're down to 21 patches for v4.13 (it was 31 for v4.12),
the diffstat jumps up tremendously with over 2k of line changes.
Almost all of these changes are the SELinux/IB work done by
Daniel Jurgens; some other noteworthy changes include a NFS v4.2
labeling fix, a new file:map permission, and reporting of policy
capabilities on policy load"
There's also now genfscon labeling support for tracefs, which was
lost in v4.1 with the separation from debugfs.
- Smack incorporates a safer socket check in file_receive, and adds a
cap_capable call in privilege check.
- TPM as usual has a bunch of fixes and enhancements.
- Multiple calls to security_add_hooks() can now be made for the same
LSM, to allow LSMs to have hook declarations across multiple files.
- IMA now supports different "ima_appraise=" modes (eg. log, fix) from
the boot command line.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (126 commits)
apparmor: put back designators in struct initialisers
seccomp: Switch from atomic_t to recount_t
seccomp: Adjust selftests to avoid double-join
seccomp: Clean up core dump logic
IMA: update IMA policy documentation to include pcr= option
ima: Log the same audit cause whenever a file has no signature
ima: Simplify policy_func_show.
integrity: Small code improvements
ima: fix get_binary_runtime_size()
ima: use ima_parse_buf() to parse template data
ima: use ima_parse_buf() to parse measurements headers
ima: introduce ima_parse_buf()
ima: Add cgroups2 to the defaults list
ima: use memdup_user_nul
ima: fix up #endif comments
IMA: Correct Kconfig dependencies for hash selection
ima: define is_ima_appraise_enabled()
ima: define Kconfig IMA_APPRAISE_BOOTPARAM option
ima: define a set of appraisal rules requiring file signatures
ima: extend the "ima_policy" boot command line to support multiple policies
...
Two entries being added at the same time to the IFLA
policy table, whilst parallel bug fixes to decnet
routing dst handling overlapping with the dst gc removal
in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
New NEWCACHEREPORT message type to be used for cache reports sent
via Netlink, effectively allowing splitting cache report reception from
mroute programming.
Suggested-by: Ryan Halbrook <halbrook@arista.com>
Signed-off-by: Julien Gomes <julien@arista.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In kernel version 4.1, tracefs was separated from debugfs into its
own filesystem. Prior to this split, files in
/sys/kernel/debug/tracing could be labeled during filesystem
creation using genfscon or later from userspace using setxattr. This
change re-enables support for genfscon labeling.
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch is based on a discussion generated by an earlier patch
from Tetsuo Handa:
* https://marc.info/?t=149035659300001&r=1&w=2
The double free problem involves the mnt_opts field of the
security_mnt_opts struct, selinux_parse_opts_str() frees the memory
on error, but doesn't set the field to NULL so if the caller later
attempts to call security_free_mnt_opts() we trigger the problem.
In order to play it safe we change selinux_parse_opts_str() to call
security_free_mnt_opts() on error instead of free'ing the memory
directly. This should ensure that everything is handled correctly,
regardless of what the caller may do.
Fixes: e000752989 ("LSM/SELinux: Interfaces to allow FS to control mount options")
Cc: stable@vger.kernel.org
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
When an NFSv4 client performs a mount operation, it first mounts the
NFSv4 root and then does path walk to the exported path and performs a
submount on that, cloning the security mount options from the root's
superblock to the submount's superblock in the process.
Unless the NFS server has an explicit fsid=0 export with the
"security_label" option, the NFSv4 root superblock will not have
SBLABEL_MNT set, and neither will the submount superblock after cloning
the security mount options. As a result, setxattr's of security labels
over NFSv4.2 will fail. In a similar fashion, NFSv4.2 mounts mounted
with the context= mount option will not show the correct labels because
the nfs_server->caps flags of the cloned superblock will still have
NFS_CAP_SECURITY_LABEL set.
Allowing the NFSv4 client to enable or disable SECURITY_LSM_NATIVE_LABELS
behavior will ensure that the SBLABEL_MNT flag has the correct value
when the client traverses from an exported path without the
"security_label" option to one with the "security_label" option and
vice versa. Similarly, checking to see if SECURITY_LSM_NATIVE_LABELS is
set upon return from security_sb_clone_mnt_opts() and clearing
NFS_CAP_SECURITY_LABEL if necessary will allow the correct labels to
be displayed for NFSv4.2 mounts mounted with the context= mount option.
Resolves: https://github.com/SELinuxProject/selinux-kernel/issues/35
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The allocated size for each ebitmap_node is 192byte by kzalloc().
Then, ebitmap_node size is fixed, so it's possible to use only 144byte
for each object by kmem_cache_zalloc().
It can reduce some dynamic allocation size.
Signed-off-by: Junil Lee <junil0814.lee@lge.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
It will allow us to remove the old netfilter hook api in the near future.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
It is likely that the SID for the same PKey will be requested many
times. To reduce the time to modify QPs and process MADs use a cache to
store PKey SIDs.
This code is heavily based on the "netif" and "netport" concept
originally developed by James Morris <jmorris@redhat.com> and Paul Moore
<paul@paul-moore.com> (see security/selinux/netif.c and
security/selinux/netport.c for more information)
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a type for Infiniband ports and an access vector for subnet
management packets. Implement the ib_port_smp hook to check that the
caller has permission to send and receive SMPs on the end port specified
by the device name and port. Add interface to query the SID for a IB
port, which walks the IB_PORT ocontexts to find an entry for the
given name and port.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a type and access vector for PKeys. Implement the ib_pkey_access
hook to check that the caller has permission to access the PKey on the
given subnet prefix. Add an interface to get the PKey SID. Walk the PKey
ocontexts to find an entry for the given subnet prefix and pkey.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Implement and attach hooks to allocate and free Infiniband object
security structures.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Support for Infiniband requires the addition of two new object contexts,
one for infiniband PKeys and another IB Ports. Added handlers to read
and write the new ocontext types when reading or writing a binary policy
representation.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a generic notificaiton mechanism in the LSM. Interested consumers
can register a callback with the LSM and security modules can produce
events.
Because access to Infiniband QPs are enforced in the setup phase of a
connection security should be enforced again if the policy changes.
Register infiniband devices for policy change notification and check all
QPs on that device when the notification is received.
Add a call to the notification mechanism from SELinux when the AVC
cache changes or setenforce is cleared.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The check is already performed in ocontext_read() when the policy is
loaded. Removing the array also fixes the following warning when
building with clang:
security/selinux/hooks.c:338:20: error: variable 'labeling_behaviors'
is not needed and will not be emitted
[-Werror,-Wunneeded-internal-declaration]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Linus Torvalds