In case of failure in loading customize topology firmware, dfw_sst.bin
gets loaded. However, current log provides this message as error even
after successfully falling back to default topology "dfw_sst.bin".
Hence to convey proper message, changing log level and message.
Signed-off-by: Chintan Patel <chintan.m.patel@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently the SB8 MIDI code sets up the timer object at each time
before scheduling it at trigger callback, but basically this is
superfluous once after set up. Also, the code misses the
del_timer_sync() call that may leave a race condition for
use-after-free.
This patch addresses these issues, moving timer_setup() to
snd_sb8dsp_midi(), and adding the del_timer_sync() call at
snd_sb8dsp_midi_output_trigger() to make sure.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
[Re-use the existing chip->midi_substream_output instead of assigning
a new field to struct snd_sb -- tiwai]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have several Dell laptops which use the codec alc236, the headset
mic can't work on these machines. Following the commit 736f20a70, we
add the pin cfg table to make the headset mic work.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On reading wrong capability pointer values driver may crash, so whenever
driver discovers unknown HDA capability, log it as error and stop traversing
the link list further.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Codec will be replaced into Component, then Codec side
doesn't use legacy_dai_naming on snd_soc_register_dais().
This patch adds new non_legacy_dai_naming flag on Component driver
and use converted its value for snd_soc_register_dais().
When Codec is replaced into Component, Codec driver needs
to have non_legacy_dai_naming = 1 flags.
Existing CPU side of course doesn't have this flag, thus CPU calls
it as true.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Codec will be replaced into Component, then Codec side only
needs to call fixup_codec_formats() at this point.
This patch adds new endianness flag on Component driver
and call convert_endianness_formats() (= was fixup_codec_format())
if endianness was true.
When Codec is replaced into Component, Codec driver needs
to have endianness = 1 flags.
Existing CPU side of course doesn't have this flag, thus CPU doesn't
call it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_runtime_ignore_pmdown_time() tallys all Codec and
CPU's "ignore_pmdown_time". Now, CPU (= via compoent)
ignore_pmdown_time is fixed as "true". Codec's one is copied from Codec
driver. This means Codec side default is "false".
Current all Codec driver will be replaced into Component, thus, we can
use for_each_rtdcom() for this totalization. This patch adds new
"pmdown_time" on Component driver. Its inverted value will be used
for this "ignore" totalizaton.
Of course all existing Component driver doesn't have its settings now,
thus, all existing "pmdown_time" is "false". This means all
Components will ignore pmdown time. This is current CPU behavior.
To keep compatibility, snd_soc_runtime_ignore_pmdown_time() totalize
Component's inverted "pmdown_time" (= total will be true) and
Codec's "ignore_pmdown_time" (= depends on Codec driver settings).
Because It is using AND operation, its result is based on Codec driver
settings only.
This means this operation can keep compatibility and doesn't have
nonconformity.
When we replace Codec to Component, the driver which has
".ignore_pmdown_time = true" will be just removed,
and the driver which doesn't have it will have new
".pmdown_time = true".
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Platform will be replaced into Component in the future.
snd_soc_platform_driver has snd_compr_ops, but snd_soc_component_driver
doesn't have. To prepare for replacing, this patch adds snd_compr_ops on
component driver.
platform will be replaced into component, and its code will be removed.
But during replacing, both platform and component process code exists.
To keep compatibility, to avoid platform NULL access and to avoid
platform/component duplicate operation during replacing process, this
patch has such code. Some of this code will be removed when platform was
removed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Platform will be replaced into Component in the future.
snd_soc_platform_driver has snd_pcm_ops, but snd_soc_component_driver
doesn't have it. To prepare for replacing, this patch adds snd_pcm_ops
on component driver.
platform will be replaced into component, and its code will be removed.
But during replacing, both platform and component process code exists.
To keep compatibility, to avoid platform NULL access and to avoid
platform/component duplicate operation during replacing process, this
patch has such code. Some of this code will be removed when platform was
removed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
MICBIAS widget type has been deprecated. Convert it to a SUPPLY widget.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Make all Intel audio drivers dependent on X86 to avoid compilation
errors for s390 and xtensa architectures.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce more logical dependencies, with the SOC selected first and the
relevant machine drivers are exposed.
The same mechanism will be used for SOF support.
Also select SND_SOC_ACPI_INTEL_MATCH for all machine drivers
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This file is a mess, order by generation with more recent last
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
split Kconfig to prepare for reuse of machine drivers for
SOF support
no functional change or edits
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Prepare for SOF integration, no functional change
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
First step of cleaning, move all tables to soc-acpi-intel-match module.
The tables remain in separate files per platform to keep them
manageable. Skylake+ platforms are still handled elsewhere since
there is no conflict with SOF for now, but this will have to be
handled at a later point.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Before we add new fields for SOF support, move to C99 syntax
as done for atom/sst and legacy hsw/bdw code
No functional change
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ACPI support is not specific to the Intel/SST driver. Move the enumeration
and matching code which is not hardware-dependent to sound/soc and rename
relevant sst_acpi_ structures and functions with snd_soc_acpi_ prefix
soc-acpi.h is protected by a #ifndef __LINUX_SND_SOC_ACPI_H for
consistency with all other SoC .h files:
grep -L __LINUX include/sound/soc* | wc -l
0
grep __LINUX include/sound/soc* | wc -l
14
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Clear IRQ mask on stream stop to avoid spurious IRQs.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio interface direction and protocol settings does not change
at runtime. So, these settings are moved from hw_params
function to dai_probe and set_fmt.
Signed-off-by: olivier moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm version of reset_control_get function
to manage driver removing properly.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Set best burst size tradeoff for 8, 16, 32 bits transfers.
Signed-off-by: olivier moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a new custom dapm routes map to quirk platforms with the
internal mic connected to IN2P.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The pointer dma_dev_name is assigned but never read, it is redundant
and can therefore be removed.
Cleans up clang warning:
sound/soc/intel/common/sst-firmware.c:288:3: warning: Value stored to
'dma_dev_name' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The default value of register 0x91 is 0x0c00 instead of 0x0000.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for ALC236/ALC3204.
Add headset mode support for ALC236/ALC3204.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver is used for AMD board using rt5650 codec.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stoney uses 16kb SRAM memory for playback and 16Kb
for capture.Modified Max buffer size to have the
correct mapping between System Memory and SRAM.
Added snd_pcm_hardware structures for playback
and capture for Stoney.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Added DMA driver changes for Stoney platform.
Below are the key differences between Stoney and CZ
In Stoney, Memory Gating is disabled.SRAM Banks won't
be turned off.No Of SRAM Banks reduced to 6.
DAGB Garlic Interface used and 16 bit resolution is supported.
SRAM bank 1 & SRAM bank 2 will be used for playback scenario.
SRAM Bank 3 & SRAM Bank 4 will be used for Capture scenario.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For Stoney platform, Memory gating is disabled.i.e SRAM Banks
won't be turned off. By Default, SRAM Bank state set to ON.
Added condition checks to skip SRAM Bank state set logic for
Stoney platform.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The refresh of HD-audio widget sysfs kobjects via
snd_hdac_refresh_widget_sysfs() is slightly racy.
The driver recreates the whole tree from scratch after deleting the
whole. When CONFIG_DEBUG_KOBJECT_RELEASE option is used, kobject
release doesn't happen immediately but delayed, while the re-creation
of the same named kobject happens soon after invoking kobject_put().
This may end up with the conflicts of duplicated kobjects, as found in
the bug report below.
In this patch, we take another approach to refresh the tree: instead
of recreating the whole tree, just add the new nodes and delete the
non-existing nodes. Since the refresh happens only once at
initialization, no longer race would happen.
Along with the code change, merge snd_hdac_refresh_widget_sysfs() with
the existing snd_hdac_refresh_widgets() with an additional bool flag
for simplifying the code.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197307
Signed-off-by: Takashi Iwai <tiwai@suse.de>
asic_type information is passed to ACP DMA Driver as platform data.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For allowing user to apply the existing quirk on a machine with a
different SSID, add a new model string entry, alc700-ref.
The quirk itself was introduced in the commit b84e843644f2: "ALSA:
hda/realtek - Enable jack detection function for Intel ALC700")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hard-coded compressed dailinks are not supported using
publicly-available firmwares, which creates unnecessary user
confusion [1]. Even if the firmware was available, the mainline
code does not have the required .dynamic=1 and .dpcm_playback=1
fields so probably never worked as is, and last and they conflict
with topology-defined streams.
Remove them and move on. This can be re-enabled with SOF later
in a more flexible manner.
[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2017-August/124868.html
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason the Atom/HiFi2 machine drivers use an id=1 instead
of zero as done on all other platforms. This gets in the way of
topology-based matching, realign for consistency. This should
not have any functional impact on existing solutions with don't rely
on topology.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove duplicate code with a common helper in all Intel machine drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
get_codec_dai() is not used, remove it
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Same as for other codecs, enable MCLK by default. When it is not
present, e.g. on MinnowBoard B3 since it's not routed on the LSE
connector, we fall back to blck-based clocking.
The DMIC quirks are also fixed, there is a single DMIC input of the
codec.
reorder variables in reverse x-mas tree as suggested by Andy
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move set_pll function to codec level and people can use it at both
codec and dai level.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move set_sysclk to codec level and people can use it at both
codec and dai level.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Secondary DAI in Exynos I2S driver is not used by any of the currently
supported boards and it causes problems due to some limitations in the
ASoC code. Disable it until it gets proper support both by board-specific
and ASoC core code. Also disable IDMA support, which relies on secondary
DAI presence.
This patch fixes following kernel warning:
samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
------------[ cut here ]------------
WARNING: CPU: 3 PID: 82 at fs/proc/generic.c:330 proc_register+0xec/0x10c
proc_dir_entry 'sub0/prealloc' already registered
Modules linked in:
CPU: 3 PID: 82 Comm: kworker/3:1 Not tainted 4.14.0-rc5-next-20171017 #3089
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
[<c0110114>] (unwind_backtrace) from [<c010c900>] (show_stack+0x10/0x14)
[<c010c900>] (show_stack) from [<c083e664>] (dump_stack+0x90/0xc8)
[<c083e664>] (dump_stack) from [<c011d2b8>] (__warn+0xd4/0x100)
[<c011d2b8>] (__warn) from [<c011d384>] (warn_slowpath_fmt+0x38/0x48)
[<c011d384>] (warn_slowpath_fmt) from [<c0271268>] (proc_register+0xec/0x10c)
[<c0271268>] (proc_register) from [<c027130c>] (proc_create_data+0x84/0xc8)
[<c027130c>] (proc_create_data) from [<c061afbc>] (snd_info_register+0x64/0xcc)
[<c061afbc>] (snd_info_register) from [<c062a6e0>] (snd_pcm_lib_preallocate_pages1+0x78/0x1a0)
[<c062a6e0>] (snd_pcm_lib_preallocate_pages1) from [<c063eef4>] (dmaengine_pcm_new+0xa0/0x1ec)
[<c063eef4>] (dmaengine_pcm_new) from [<c062b9f8>] (snd_soc_platform_drv_pcm_new+0x1c/0x28)
[<c062b9f8>] (snd_soc_platform_drv_pcm_new) from [<c063d54c>] (soc_new_pcm+0x2f4/0x4f4)
[<c063d54c>] (soc_new_pcm) from [<c063107c>] (snd_soc_register_card+0xc4c/0xdc4)
[<c063107c>] (snd_soc_register_card) from [<c063db30>] (devm_snd_soc_register_card+0x34/0x70)
[<c063db30>] (devm_snd_soc_register_card) from [<c064af60>] (asoc_simple_card_probe+0x230/0x47c)
[<c064af60>] (asoc_simple_card_probe) from [<c047f8fc>] (platform_drv_probe+0x50/0xb0)
[<c047f8fc>] (platform_drv_probe) from [<c047dee0>] (driver_probe_device+0x2a0/0x46c)
[<c047dee0>] (driver_probe_device) from [<c047c0bc>] (bus_for_each_drv+0x44/0x8c)
[<c047c0bc>] (bus_for_each_drv) from [<c047db50>] (__device_attach+0xa0/0x134)
[<c047db50>] (__device_attach) from [<c047cf7c>] (bus_probe_device+0x88/0x90)
[<c047cf7c>] (bus_probe_device) from [<c047d484>] (deferred_probe_work_func+0x3c/0x168)
[<c047d484>] (deferred_probe_work_func) from [<c01371f8>] (process_one_work+0x188/0x41c)
[<c01371f8>] (process_one_work) from [<c01374b4>] (process_scheduled_works+0x28/0x38)
[<c01374b4>] (process_scheduled_works) from [<c01376d4>] (worker_thread+0x210/0x4dc)
[<c01376d4>] (worker_thread) from [<c013d9cc>] (kthread+0x128/0x164)
[<c013d9cc>] (kthread) from [<c0108848>] (ret_from_fork+0x14/0x2c)
---[ end trace bad8db6ee771d094 ]--
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
converted the get_kctl_0dB_offset() call for killing set_fs() usage in
HD-audio codec code. The conversion assumed that the TLV callback
used in HD-audio code is only snd_hda_mixer_amp() and applies the TLV
calculation locally.
Although this assumption is correct, and all slave kctls are actually
with that callback, the current code is still utterly buggy; it
doesn't hit this condition and falls back to the next check. It's
because the function gets called after adding slave kctls to vmaster.
By assigning a slave kctl, the slave kctl object is faked inside
vmaster code, and the whole kctl ops are overridden. Thus the
callback op points to a different value from what we've assumed.
More badly, as reported by the KERNEXEC and UDEREF features of PaX,
the code flow turns into the unexpected pitfall. The next fallback
check is SNDRV_CTL_ELEM_ACCESS_TLV_READ access bit, and this always
hits for each kctl with TLV. Then it evaluates the callback function
pointer wrongly as if it were a TLV array. Although currently its
side-effect is fairly limited, this incorrect reference may lead to an
unpleasant result.
For addressing the regression, this patch introduces a new helper to
vmaster code, snd_ctl_apply_vmaster_slaves(). This works similarly
like the existing map_slaves() in hda_codec.c: it loops over the slave
list of the given master, and applies the given function to each
slave. Then the initializer function receives the right kctl object
and we can compare the correct pointer instead of the faked one.
Also, for catching the similar breakage in future, give an error
message when the unexpected TLV callback is found and bail out
immediately.
Fixes: 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
Reported-by: PaX Team <pageexec@freemail.hu>
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While converting the error messages to the standard macros in the
commit 4e76a8833f ("ALSA: hda - Replace with standard printk"), a
superfluous '-' slipped in the code mistakenly. Its influence is
almost negligible, merely shows a dB value as negative integer instead
of positive integer (or vice versa) in the rare error message.
So let's kill this embarrassing byte to show more correct value.
Fixes: 4e76a8833f ("ALSA: hda - Replace with standard printk")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The loop in snd_hdac_bus_parse_capabilities() may go to nirvana when
it hits an invalid register value read:
BUG: unable to handle kernel paging request at ffffad5dc41f3fff
IP: pci_azx_readl+0x5/0x10 [snd_hda_intel]
Call Trace:
snd_hdac_bus_parse_capabilities+0x3c/0x1f0 [snd_hda_core]
azx_probe_continue+0x7d5/0x940 [snd_hda_intel]
.....
This happened on a new Intel machine, and we need to check the value
and abort the loop accordingly.
[Note: the fixes tag below indicates only the commit where this patch
can be applied; the original problem was introduced even before that
commit]
Fixes: 6720b38420 ("ALSA: hda - move bus_parse_capabilities to core")
Cc: <stable@vger.kernel.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the old AC97 is not used, CONFIG_SND_SOC_AC97_BUS is not
defined. As a consequence, in the error path, snd_soc_free_ac97_codec()
is not defined and triggers a compilation error.
Fix it for wm9705 and wm9712, as wm9713 is correctly written.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
So far we assumed that each driver implements the hotplug PCM handling
properly, e.g. dealing with the pending PCM stream at disconnect
callback. But most codes don't care, and it eventually leaves the PCM
stream inconsistent state when an abrupt disconnection like sysfs
unbind happens.
This patch is simple but a big-hammer solution: invoke snd_pcm_stop()
at the common PCM disconnect callback always when the stream is
running.
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal PCM (aka DPCM backend PCM) doesn't need any registration
procedure, thus currently we bail out immediately at dev_register
callback. Similarly, its counterpart, dev_disconnect callback, is
superfluous for the internal PCM. For simplifying and avoiding the
conflicting disconnect call for internal PCM objects, this patch drops
dev_register and dev_disconnect callbacks for the internal ops.
The only uncertain thing by this action is whether skipping the PCM
state change to SNDRV_PCM_STATE_DISCONNECT for the internal PCM is
mandatory. Looking through the current implementations, this doesn't
look so, hence dropping the whole dev_disconnect would make more
sense.
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 'use' locking macros are no-ops if neither SMP or SND_DEBUG is
enabled. This might once have been OK in non-preemptible
configurations, but even in that case snd_seq_read() may sleep while
relying on a 'use' lock. So always use the proper implementations.
Cc: stable@vger.kernel.org
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The assignment to variable tmp is redundant as the value is never
read and a new value is assigned to tmp in the following for-loop,
so remove the assignment.
Cleans up clang warning: Value stored to 'tmp' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The assignment to variable i is redundant as it is never read
because it is updated a little later on. Remove this assignment.
Cleans up clang warning: Value stored to 'i' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Back-merge for applying the timer API conversion patch for line6
driver that conflicts with the recent fix in upstream.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pointer card is being assigned a value but it is never used.
Remove this redundant variable. Cleans up clang warning:
Value stored to 'card' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Variable dpcm is never used and hence can be removed. Variable
runtime is being assigned but is never read, so the assignment
is redundant and can be removed. Cleans up two clang warnings:
Value stored to 'dpcm' is never read
Value stored to 'runtime' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The variable p2 is being assigned but never used, it is redundant
and can be safely removed. Cleans up clang warning: Value stored to
'p2' is never read.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Variable result is being assigned a value from a calculation
however the variable is never read, so this redundant variable
can be removed.
Cleans up clang warning: Value stored to 'result' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An earlier commit removed the access to variable runtime
and we are now left with unused variable that is redundant,
so remove it.
Cleans up the clang warning: Value stored to 'runtime' is never read
Fixes: e11f0f90a6 ("ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO internal command")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add native DSD support quirk for Pro-Ject Pre Box S2 Digital USB id
2772:0230.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To make it consistent, add sentinel for sst_cnl_devdata also.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since FE dais can come from topology, add dai_load ops
for the dais from topology.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since FE dais can come from topology, split the FE dais from existing
dai array so that FE dais need not be registered if they come from
topology. Add use_tplg_pcm flag to check whether FE dais will be
registered from topology during dai driver component registration.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If snd_hda_get_conn_list() fails then "conn" isn't initialized.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using the ARRAY_SIZE macro improves the readability of the code.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ADG inputs clock from CLK{A,B,C,I} and outputs clock from
CLKOUT{0,1,2,3} which is selected by BRG{A,B}.
Now, ADG is assuming BRGA is for 44100Hz related clocks,
BRGB is for 48000Hz related clocks.
Clock related debug is very difficult/confusable.
This patch cleanups clock related debug info.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Return proper error instead of 0 if the revision does not match.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
caiaq driver doesn't kill the URB properly at its error path during
the probe, which may lead to a use-after-free error later. This patch
addresses it.
Reported-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pulling the EP validity checks in USB audio drivers.
It also adds a new helper in USB core, which was acked by Greg.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few other places calling usb_submit_urb() with the URB
composed from the fixed endpoint without validation. For avoiding the
spurious kernel warnings, add the sanity checks to appropriate
places.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few other places in caiaq driver have the URB handling with the
fixed endpoints without checking the validity, too. Add the sanity
check with the new helper function at each appropriate place for
avoiding the spurious kernel warnings due to invalid EPs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
hiface usb-audio driver sets up URBs containing the fixed endpoints
without validation. This may end up with an oops-like kernel warning
when submitted.
For avoiding it, this patch adds the calls of the new sanity-check
helper for URBs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
usx2y driver sets up URBs containing the fixed endpoints without
validation. This may end up with an oops-like kernel warning when
submitted.
For avoiding it, this patch adds the calls of the new sanity-check
helper for URBs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB-audio driver may set up a URB containing the fixed EP without
validating its presence for some non-class-compliant devices. This
may end up with an oops-like kernel warning when submitted.
For avoiding it, this patch adds the call of the new sanity-check
helper for URBs. The checks are needed only for MIDI I/O as the other
places have already some other checks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As syzkaller spotted, currently line6 drivers submit a URB with the
fixed EP without checking whether it's actually available, which may
result in a kernel warning like:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
------------[ cut here ]------------
WARNING: CPU: 0 PID: 24 at drivers/usb/core/urb.c:449
usb_submit_urb+0xf8a/0x11d0
Modules linked in:
CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc2-42613-g1488251d1a98 #238
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
line6_start_listen+0x55f/0x9e0 sound/usb/line6/driver.c:82
line6_init_cap_control sound/usb/line6/driver.c:690
line6_probe+0x7c9/0x1310 sound/usb/line6/driver.c:764
podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474
usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
....
This patch adds a sanity check of validity of EPs at the device
initialization phase for avoiding the call with an invalid EP.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As syzkaller spotted, currently caiaq driver submits a URB with the
fixed EP without checking whether it's actually available, which may
result in a kernel warning like:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1150 at drivers/usb/core/urb.c:449
usb_submit_urb+0xf8a/0x11d0
Modules linked in:
CPU: 1 PID: 1150 Comm: kworker/1:1 Not tainted
4.14.0-rc2-42660-g24b7bd59eec0 #277
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
init_card sound/usb/caiaq/device.c:467
snd_probe+0x81c/0x1150 sound/usb/caiaq/device.c:525
usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
....
This patch adds a sanity check of validity of EPs at the device
initialization phase for avoiding the call with an invalid EP.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As syzkaller spotted, currently bcd2000 driver submits a URB with the
fixed EP without checking whether it's actually available, which may
result in a kernel warning like:
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1846 at drivers/usb/core/urb.c:449
usb_submit_urb+0xf8a/0x11d0
Modules linked in:
CPU: 0 PID: 1846 Comm: kworker/0:2 Not tainted
4.14.0-rc2-42613-g1488251d1a98 #238
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
bcd2000_init_device sound/usb/bcd2000/bcd2000.c:289
bcd2000_init_midi sound/usb/bcd2000/bcd2000.c:345
bcd2000_probe+0xe64/0x19e0 sound/usb/bcd2000/bcd2000.c:406
usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
....
This patch adds a sanity check of validity of EPs at the device
initialization phase for avoiding the call with an invalid EP.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In case of user unbind ALSA driver during playing back / capturing,
each driver needs to stop and remove it correctly. One note here is
that we can't cancel from remove function in such case, because
unbind operation doesn't check return value from remove function.
So, we *must* stop and remove in this case.
For this purpose, we need to sync (= wait) until the all top-level
operations are canceled at remove function.
For example, snd_card_free() processes the disconnection procedure at
first, then waits for the completion. That's how the hot-unplug works
safely. It's implemented, at least, in the top-level driver removal.
Now for the lower level driver, we need a similar strategy. Notify to
the toplevel for hot-unplug (disconnect in ALSA), and sync with the
stop operation, then continue the rest of its own remove procedure.
This patch adds snd_card_disconnect_sync(), and driver can use it from
remove function.
Note: the "lower level" driver here refers to a middle layer driver
(e.g. ASoC components) that can be unbound freely during operation.
Most of legacy ALSA helper drivers don't have such a problem because
they can't be unbound.
Note#2: snd_card_disconnect_sync() merely calls snd_card_disconnect()
and syncs with closing all pending files. It takes only the files
opened by user-space into account, and doesn't care about object
refcounts. (The latter is handled by snd_card_free() completion call,
BTW.) Also, the function doesn't free resources by itself.
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current CTU/MIX/DVC are directly using rsnd_kctrl_cfg_m/s to control
val etc, but it is difficult to read/understand.
And there was no uniformity in access method.
This patch adds new rsnd_kctrl_xxx() and implements uniformed access
method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a potential race window opened at creating and deleting a
port via ioctl, as spotted by fuzzing. snd_seq_create_port() creates
a port object and returns its pointer, but it doesn't take the
refcount, thus it can be deleted immediately by another thread.
Meanwhile, snd_seq_ioctl_create_port() still calls the function
snd_seq_system_client_ev_port_start() with the created port object
that is being deleted, and this triggers use-after-free like:
BUG: KASAN: use-after-free in snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] at addr ffff8801f2241cb1
=============================================================================
BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected
-----------------------------------------------------------------------------
INFO: Allocated in snd_seq_create_port+0x94/0x9b0 [snd_seq] age=1 cpu=3 pid=4511
___slab_alloc+0x425/0x460
__slab_alloc+0x20/0x40
kmem_cache_alloc_trace+0x150/0x190
snd_seq_create_port+0x94/0x9b0 [snd_seq]
snd_seq_ioctl_create_port+0xd1/0x630 [snd_seq]
snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
snd_seq_ioctl+0x40/0x80 [snd_seq]
do_vfs_ioctl+0x54b/0xda0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x16/0x75
INFO: Freed in port_delete+0x136/0x1a0 [snd_seq] age=1 cpu=2 pid=4717
__slab_free+0x204/0x310
kfree+0x15f/0x180
port_delete+0x136/0x1a0 [snd_seq]
snd_seq_delete_port+0x235/0x350 [snd_seq]
snd_seq_ioctl_delete_port+0xc8/0x180 [snd_seq]
snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
snd_seq_ioctl+0x40/0x80 [snd_seq]
do_vfs_ioctl+0x54b/0xda0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x16/0x75
Call Trace:
[<ffffffff81b03781>] dump_stack+0x63/0x82
[<ffffffff81531b3b>] print_trailer+0xfb/0x160
[<ffffffff81536db4>] object_err+0x34/0x40
[<ffffffff815392d3>] kasan_report.part.2+0x223/0x520
[<ffffffffa07aadf4>] ? snd_seq_ioctl_create_port+0x504/0x630 [snd_seq]
[<ffffffff815395fe>] __asan_report_load1_noabort+0x2e/0x30
[<ffffffffa07aadf4>] snd_seq_ioctl_create_port+0x504/0x630 [snd_seq]
[<ffffffffa07aa8f0>] ? snd_seq_ioctl_delete_port+0x180/0x180 [snd_seq]
[<ffffffff8136be50>] ? taskstats_exit+0xbc0/0xbc0
[<ffffffffa07abc5c>] snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
[<ffffffffa07abd10>] snd_seq_ioctl+0x40/0x80 [snd_seq]
[<ffffffff8136d433>] ? acct_account_cputime+0x63/0x80
[<ffffffff815b515b>] do_vfs_ioctl+0x54b/0xda0
.....
We may fix this in a few different ways, and in this patch, it's fixed
simply by taking the refcount properly at snd_seq_create_port() and
letting the caller unref the object after use. Also, there is another
potential use-after-free by sprintf() call in snd_seq_create_port(),
and this is moved inside the lock.
This fix covers CVE-2017-15265.
Reported-and-tested-by: Michael23 Yu <ycqzsy@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB-audio driver may leave a stray URB for the mixer interrupt when it
exits by some error during probe. This leads to a use-after-free
error as spotted by syzkaller like:
==================================================================
BUG: KASAN: use-after-free in snd_usb_mixer_interrupt+0x604/0x6f0
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:16
dump_stack+0x292/0x395 lib/dump_stack.c:52
print_address_description+0x78/0x280 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351
kasan_report+0x23d/0x350 mm/kasan/report.c:409
__asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:430
snd_usb_mixer_interrupt+0x604/0x6f0 sound/usb/mixer.c:2490
__usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779
....
Allocated by task 1484:
save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772
kmalloc ./include/linux/slab.h:493
kzalloc ./include/linux/slab.h:666
snd_usb_create_mixer+0x145/0x1010 sound/usb/mixer.c:2540
create_standard_mixer_quirk+0x58/0x80 sound/usb/quirks.c:516
snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560
create_composite_quirk+0x1c4/0x3e0 sound/usb/quirks.c:59
snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560
usb_audio_probe+0x1040/0x2c10 sound/usb/card.c:618
....
Freed by task 1484:
save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459
kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524
slab_free_hook mm/slub.c:1390
slab_free_freelist_hook mm/slub.c:1412
slab_free mm/slub.c:2988
kfree+0xf6/0x2f0 mm/slub.c:3919
snd_usb_mixer_free+0x11a/0x160 sound/usb/mixer.c:2244
snd_usb_mixer_dev_free+0x36/0x50 sound/usb/mixer.c:2250
__snd_device_free+0x1ff/0x380 sound/core/device.c:91
snd_device_free_all+0x8f/0xe0 sound/core/device.c:244
snd_card_do_free sound/core/init.c:461
release_card_device+0x47/0x170 sound/core/init.c:181
device_release+0x13f/0x210 drivers/base/core.c:814
....
Actually such a URB is killed properly at disconnection when the
device gets probed successfully, and what we need is to apply it for
the error-path, too.
In this patch, we apply snd_usb_mixer_disconnect() at releasing.
Also introduce a new flag, disconnected, to struct usb_mixer_interface
for not performing the disconnection procedure twice.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The sequencer event may contain a user-space pointer with its
SNDRV_SEQ_EXT_USRPTR bit, and we assure that its delivery is limited
with non-atomic mode. Otherwise the copy_from_user() may hit the
fault and cause a problem. Although the core code doesn't set such a
flag (only set at snd_seq_write()), any wild driver may set it
mistakenly and lead to an unexpected crash.
This patch adds a sanity check of such events at the delivery core
code to filter out the invalid invocation in the atomic mode.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The newly introduced function is declared as globally visible,
but is not declared in a header, causing a warning 'make W=1'
or 'make C=1':
sound/soc/soc-dapm.c:3782:1: warning: symbol 'snd_soc_dapm_free_kcontrol' was not declared. Should it be static?
The suggestion to make it static seems appropriate here, so let's
do that.
Fixes: 19ad683abc ("ASoC: dapm: Avoid creating kcontrol for params")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
We now allocate the array conditionally, but we always pass
the pointer to the new snd_soc_dapm_free_kcontrol() function,
which introduces a warning for the case that it is not
initialized:
sound/soc/soc-dapm.c: In function 'snd_soc_dapm_new_pcm':
sound/soc/soc-dapm.c:3940:2: error: 'w_param_text' may be used uninitialized in this function [-Werror=maybe-uninitialized]
As snd_soc_dapm_free_kcontrol() is global, it doesn't get inlined
and gcc fails to notice that we don't actually access the array
in that case, so the code is actually safe. Adding an initialization
for the array pointer shuts up the warning.
Fixes: 19ad683abc ("ASoC: dapm: Avoid creating kcontrol for params")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to print an error message if kzalloc fails.
The core will print it.
Reported-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC platform/codec will be replaced to component soon.
But, some function exist in "platform" doesn't exist in "component".
Current soc-core has snd_soc_register_component(), but
doesn't have snd_soc_add_component() like snd_soc_add_platform().
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
While line6_probe() may kick off URB for a control MIDI endpoint, the
function doesn't clean up it properly at its error path. This results
in a leftover URB action that is eventually triggered later and causes
an Oops like:
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 0 Comm: swapper/1 Not tainted
RIP: 0010:usb_fill_bulk_urb ./include/linux/usb.h:1619
RIP: 0010:line6_start_listen+0x3fe/0x9e0 sound/usb/line6/driver.c:76
Call Trace:
<IRQ>
line6_data_received+0x1f7/0x470 sound/usb/line6/driver.c:326
__usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779
usb_hcd_giveback_urb+0x337/0x420 drivers/usb/core/hcd.c:1845
dummy_timer+0xba9/0x39f0 drivers/usb/gadget/udc/dummy_hcd.c:1965
call_timer_fn+0x2a2/0x940 kernel/time/timer.c:1281
....
Since the whole clean-up procedure is done in line6_disconnect()
callback, we can simply call it in the error path instead of
open-coding the whole again. It'll fix such an issue automagically.
The bug was spotted by syzkaller.
Fixes: eedd0e95d3 ("ALSA: line6: Don't forget to call driver's destructor at error path")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When podhd_init() failed with the acquiring a ctrl i/f, the line6
helper still calls the disconnect callback that eventually calls again
usb_driver_release_interface() with the NULL intf.
Put the proper NULL check before calling it for avoiding an Oops.
Fixes: fc90172ba2 ("ALSA: line6: Claim pod x3 usb data interface")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error path in podhd_init() tries to clear the pending timer, while
the timer object is initialized at the end of init sequence, thus it
may hit the uninitialized object, as spotted by syzkaller:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 1845 Comm: kworker/1:2 Not tainted
4.14.0-rc2-42613-g1488251d1a98 #238
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x292/0x395 lib/dump_stack.c:52
register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
__lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
del_timer_sync+0x12c/0x280 kernel/time/timer.c:1237
podhd_disconnect+0x8c/0x160 sound/usb/line6/podhd.c:299
line6_probe+0x844/0x1310 sound/usb/line6/driver.c:783
podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474
....
For addressing it, assure the initializations of timer and work by
moving them to the beginning of podhd_init().
Fixes: 790869dacc ("ALSA: line6: Add support for POD X3")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, lots of Plantronics, MS and Phoenix Audio devices need the
quirk not to read sample rate back, and the list just grows.
In this patch, instead of adding each device, apply the quirk by
matching with these vendors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The event handler in the virmidi sequencer code takes a read-lock for
the linked list traverse, while it's calling snd_seq_dump_var_event()
in the loop. The latter function may expand the user-space data
depending on the event type. It eventually invokes copy_from_user(),
which might be a potential dead-lock.
The sequencer core guarantees that the user-space data is passed only
with atomic=0 argument, but snd_virmidi_dev_receive_event() ignores it
and always takes read-lock(). For avoiding the problem above, this
patch introduces rwsem for non-atomic case, while keeping rwlock for
atomic case.
Also while we're at it: the superfluous irq flags is dropped in
snd_virmidi_input_open().
Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like other Plantronics devices, P610 does not support sample
rate reading. Apply sample rate quirk to it.
BugLink: https://bugs.launchpad.net/bugs/1719853
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Set dma control ipc can be used to set the M/N divider, enable the clks. It
takes different payload for different configuration. So modify the
skl_dsp_set_dma_control API to take the size and node_id as argument.
Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove dead code which was missed in previous changes. This is not
visible with git diff but there is a test+return on the same condition
just above.
Also reuse local variable instead of fetching the jack information twice.
Tested on Acer R11 (cyan)
Fixes: 3bbda5a386 ('ASoC: Intel: cht_bsw_max98090_ti: Fix jack initialization')
Cc: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable sys clock as well as ref clock when runtime suspended.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement suspend and resume callbacks to save and restore register
state, to support platforms where the power is disabled during suspend.
In future the driver could be converted to use regmap which would
simplify the suspend and resume code.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add runtime PM to disable the clock when the device is not in use.
The ASoC core takes care of the pm_runtime_get_sync / put calls so we
just need to provide runtime_suspend / runtime_resume functions and
enable runtime PM.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement suspend and resume callbacks to save and restore register
state, to support platforms where the power is disabled during suspend.
In future the driver could be converted to use regmap which would
simplify the suspend and resume code.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable sys clock as well as ref clock when runtime suspended.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement suspend and resume callbacks to save and restore register
state, to support platforms where the power is disabled during suspend.
In future the driver could be converted to use regmap which would
simplify the suspend and resume code.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add runtime PM to disable the clock when the device is not in use.
The ASoC core takes care of the pm_runtime_get_sync / put calls so we
just need to provide runtime_suspend / runtime_resume functions and
enable runtime PM.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement suspend and resume callbacks to save and restore register
state, to support platforms where the power is disabled during suspend.
In future the driver could be converted to use regmap which would
simplify the suspend and resume code.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Check the the pm_runtime_get_sync return code and return if an error.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Variable active_slots is unsigned so checking whether it is less than
zero is not necessary.
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently in codec to codec dai link if there are multiple
params defined then dapm can use created kcontrol to
decide which param to apply at runtime.
However, in case there is only single param configuration
then there is no point in creating the kcontrol and also there
is no point in allocating memory for kcontrol.
In the snd_soc_dapm_new_pcm function, there is memory
allocation happening for kcontrol which is later used
or not used based on num_param. It is better to not
allocate memory when there is only a single configuration.
This change is to remedy that anomaly.
Signed-off-by: anish kumar <yesanishhere@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of small fixes, mostly with stable ones:
- X32 ABI fix for PCM;
likely not so many people suffer from it, but still better to fix
- Two minor kernel warning fixes on USB audio devices spotted by
syzkaller
- Regression fix of echoaudio due to its inconsistent dimension
- Fix for HBR support on Intel DP audio, on some recent chips
- USB-audio quirk for yet another Plantronics devices
- Fix for potential double-fetch in ASIHPI FIFO queue
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=uVz7
-----END PGP SIGNATURE-----
Merge tag 'sound-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, mostly with stable ones:
- X32 ABI fix for PCM; likely not so many people suffer from it, but
still better to fix
- Two minor kernel warning fixes on USB audio devices spotted by
syzkaller
- Regression fix of echoaudio due to its inconsistent dimension
- Fix for HBR support on Intel DP audio, on some recent chips
- USB-audio quirk for yet another Plantronics devices
- Fix for potential double-fetch in ASIHPI FIFO queue"
* tag 'sound-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usx2y: Suppress kernel warning at page allocation failures
Revert "ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members"
ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptor
ALSA: pcm: Fix structure definition for X32 ABI
ALSA: usb-audio: Add sample rate quirk for Plantronics C310/C520-M
ALSA: hda - program ICT bits to support HBR audio
ALSA: asihpi: fix a potential double-fetch bug when copying puhm
ALSA: compress: Remove unused variable
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. This adds a pointer back to struct
snd_timer.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. This requires adding a pointer to
hold the timer's target substream, as there won't be a way to pass this in
the future.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the of_device_get_match_data() helper instead of open coding.
Note that when used with DT, there's always a valid match.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC platform/codec will be replaced to component soon.
This means 1 device might have multiple components. But current
unregister component function only checks "dev" to find it.
This means, unexpected component might be unregistered by current
function.
But, it is no problem if driver registered only 1 component.
To prepare avoid this issue, this patch adds new component
lookup function. it finds component by "dev" and "driver name".
Here, the reason why it uses "driver name" is that "component name"
was created by fmt_single_name() and difficult to use it from driver.
Driver of course knows its "driver name", thus, using it is more easy.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
These modes of operation were not working properly and it is
unclear if the hardware could fully support these modes properly.
There is little to be gained by enabling these modes, therefore,
we will just remove support.
Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDIF port cannot modify its format so a set_fmt function is not
needed. Previously, we used a generic set_fmt for all ports and returned
an error code for the SPDIF port. It is cleaner to not populate the
set_fmt field.
Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The helper function cygnus_ssp_set_custom_fsync_width() is intended
to be called from an ASoC machine driver, need to export symbol
if using modules.
Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Both DVC/MIX have Volume Ramp Control. This patch supprts MIX
Volume Ramp. One note is that main purpose of MIX Volume Ramp
is to reduce noise, thus, MIX Ramp range is very few if you
compare to DVC Volume Ramp (DVC = 5bit, MIX = 4bit).
You can use MIX Volume Ranp like below
amixer set "MIX Ramp Up Rate" "0.125 dB/1 step"
amixer set "MIX Ramp Down Rate" "0.125 dB/1 step"
amixer set "MIX Ramp" on
aplay xxx.wav &
amixer set "MIX",0 80% // DAI0 Volume Down
amixer set "MIX",1 100% // DAI1 Volume Up
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DVC is supporting Volume Ramp Rate, and MIX has Volume Ramp
but not yet supported. To support MIX Volume Ramp, we want to
share Rate List since DVC/MIX are using almost same list.
This patch move DVC specific Volume Ramp Rate List to core.c.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Same CTU might be used few times if system/platform is using MIX.
For example below case.
DAI0 playback = <&src0 &ctu02 &mix0 &dvc0 &ssi0>;
DAI1 playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
This case, ALSA will have CTU,0 and CTU,1 kcontrol interfaces,
but these are same CTU. This is confusing.
This patch adds new flags and avoid such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Same DVC might be used few times if system/platform is using MIX.
For example below case.
DAI0 playback = <&src0 &ctu02 &mix0 &dvc0 &ssi0>;
DAI1 playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
This case, ALSA will have DVC,0 and DVC,1 kcontrol interfaces,
but these are same DVC. This is confusing.
This patch adds new flags and avoid such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSI is using rsnd_ssi_flags_xxx() macro to control flags.
But it is useful macro not only for SSI. This patch replace it
to more generic rsnd_flags_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The macro used to set the microphone bias level causes the
snd_soc_write() call to overwrite other fields in the CDC_A_MICB_1_VAL
register. The macro also does not return the proper level value
to use. This fixes this by preserving all bits from the register
that are not the level while setting the level.
Signed-off-by: Jean-François Têtu <jean-francois.tetu@savoirfairelinux.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename suspend and resume functions to runtime_suspend and
runtime_resume, which is what they actually are. This will avoid
confusion when adding suspend and resume functions in a subsequent
patch.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add pm_runtime_get_sync and pm_runtime_put calls to set_fmt callback
function. This fixes a bus error during boot when CONFIG_SUSPEND is
defined when this function gets called while the device is runtime
disabled and device registers are accessed while the clock is disabled.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename suspend and resume functions to runtime_suspend and
runtime_resume, which is what they actually are. This will avoid
confusion when adding suspend and resume functions in a subsequent
patch.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the recent commit d9f9c167ed ("ASoC: rockchip: Init dapm routes
dynamically") we improperly allocated memory for the card->dapm_routes
causing us to overflow the allocation on every boot. Oops.
Let's allocate the correct amount of memory. We'll also add a check
to make sure that we don't overrun memory even if we encounter some
sort of weird device tree.
Fixes: d9f9c167ed ("ASoC: rockchip: Init dapm routes dynamically")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The very first time a headset is plugged in, detection is unreliable
because bias hasn't been configured yet, it's done once a mechanical
insertion interrupt has been triggered, so following insertions (and
thus detections) are not affected.
To fix the very first detection, the bias must also be configured in the
function that setup the MBHC. Move pm8916_wcd_setup_mbhc after
pm8916_mbhc_configure_bias to avoid a forward declaration.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The current device tree representation of the R-Car SSI assumes that they
are numbered consecutively, starting from 0. Alas, this is not the case
with the R8A77995 (D3) SoC which SSI1/SSI2 aren't present. In order to
keep the existing device trees working, I'm suggesting to use a disabled
node for SSI0/SSI1. Teach the SSI probe to just skip disabled nodes.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo snd_soc_msm8916_analog | grep alias
$
After this patch:
$ modinfo snd_soc_msm8916_analog | grep alias
alias: of:N*T*Cqcom,pm8916-wcd-analog-codecC*
alias: of:N*T*Cqcom,pm8916-wcd-analog-codec
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The usx2y driver allocates the stream read/write buffers in continuous
pages depending on the stream setup, and this may spew the kernel
warning messages with a stack trace like:
WARNING: CPU: 1 PID: 1846 at mm/page_alloc.c:3883
__alloc_pages_slowpath+0x1ef2/0x2d70
Modules linked in:
CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted
....
It may confuse user as if it were any serious error, although this is
no fatal error and the driver handles the error case gracefully.
Since the driver has already some sanity check of the given size (128
and 256 pages), it can't pass any crazy value. So it's merely page
fragmentation.
This patch adds __GFP_NOWARN to each caller for suppressing such
kernel warnings. The original issue was spotted by syzkaller.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only passed to a const argument of the
function snd_pcm_set_ops in the file referencing them. Also, add const
to the declaration in the headers.
Structures found using Coccinelle and changes done by hand.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 275353bb68 to fix a regression which can abort
'alsactl' program in alsa-utils due to assertion in alsa-lib.
alsactl: control.c:2513: snd_ctl_elem_value_get_integer: Assertion `idx < sizeof(obj->value.integer.value) / sizeof(obj->value.integer.value[0])' failed.
alsactl: control.c:2976: snd_ctl_elem_value_get_integer: Assertion `idx < ARRAY_SIZE(obj->value.integer.value)' failed.
This commit is a band-aid. In a point of usage of ALSA control interface,
the drivers still bring an issue that they prevent userspace applications
to have a consistent way to parse each levels of the dimension information
via ALSA control interface.
Let me investigate this issue. Current implementation of the drivers
have three control element sets with dimension information:
* 'Monitor Mixer Volume' (type: integer)
* 'VMixer Volume' (type: integer)
* 'VU-meters' (type: boolean)
Although the number of elements named as 'Monitor Mixer Volume' differs
depending on drivers in this group, it can be calculated by macros
defined by each driver (= (BX_NUM - BX_ANALOG_IN) * BX_ANALOG_IN). Each
of the elements has one member for value and has dimension information
with 2 levels (= BX_ANALOG_IN * (BX_NUM - BX_ANALOG_IN)). For these
elements, userspace applications are expected to handle the dimension
information so that all of the elements construct a matrix where the
number of rows and columns are represented by the dimension information.
The same way is applied to elements named as 'VMixer Volume'. The number
of these elements can also be calculated by macros defined by each
drivers (= PX_ANALOG_IN * BX_ANALOG_IN). Each of the element has one
member for value and has dimension information with 2 levels
(= BX_ANALOG_IN * PX_ANALOG_IN). All of the elements construct a matrix
with the dimension information.
An element named as 'VU-meters' gets a different way in a point of
dimension information. The element includes 96 members for value. The
element has dimension information with 3 levels (= 3 or 2 * 16 * 2). For
this element, userspace applications are expected to handle the dimension
information so that all of the members for value construct a matrix
where the number of rows and columns are represented by the dimension
information. This is different from the way for the former.
As a summary, the drivers were not designed to produce a consistent way to
parse the dimension information. This makes it hard for general userspace
applications such as amixer to parse the information by a consistent way,
and actually no userspace applications except for 'echomixer' utilize the
dimension information. Additionally, no drivers excluding this group use
the information.
The reverted commit was written based on the latter way. A commit
860c1994a7 ('ALSA: control: add dimension validator for userspace
elements') is written based on the latter way, too. The patch should be
reconsider too in the same time to re-define a consistent way to parse the
dimension information.
Reported-by: Mark Hills <mark@xwax.org>
Reported-by: S. Christian Collins <s.chriscollins@gmail.com>
Fixes: 275353bb68 ('ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members')
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
msm8916-wcd-analog uses button0 to differentiate between headphone and
headset. Under some circumstances, button pressed and released
interrupts are not fired as the driver expects it.
For instance, with some connectors, there are spurious button-pressed
interrupts when unplugging a headphone, without the corresponding
button-released interrupt. But the codec always alternates between
button pressed and released interrupts, it cannot fire two interrupts of
the same kind in a row. That means that when the headphone is plugged
back, only a button-released interrupt will be fired instead of pressed
then released. This causes the driver to report headphone as headset.
By changing the logic and relying on button 0 release interrupt, the
driver could be made more robust for connectors that differ from the one
used on the Dragonboard's audio mezzanine.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to set a specific bit for 50 bclk rate. So add set_bclk_ratio
function to set the bit.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Jack name is not getting formatted correctly hence resulting
in invalid name for HDMI/DP input devices.
This was recently exposed due changes brought by MST:
commit 3a13347f05 ("ASoC: Intel: kbl: Add jack port initialize
in kbl machine drivers")
Signed-off-by: Chintan Patel <chintan.m.patel@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In current ALSA SoC, Codec only has set_bias_level feature.
Codec will be merged into Component in next generation ALSA SoC,
thus current Codec specific feature need to be merged into it.
This is glue patch for it.
Codec driver has .idle_bias_off for dapm bias. But Component
driver doesn't have it, and dapm->idle_bias_off is set as "true".
To keep compatibility, this patch adds "idle_bias_on" instead of
".idle_bias_off" on Component driver.
dapm->idle_bias_off will be set by inverted idle_bias_on.
When we replace Codec to Component, the driver which has
".idle_bias_off = true" is just remove it,
and the driver which doesn't have it will have new
".idle_bias_on = true".
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In current ALSA SoC, Platform only has pcm_new/pcm_free feature,
but it should be supported on Component level. This patch adds it.
The v1 was added commit 99b04f4c40 ("ASoC: add Component level
pcm_new/pcm_free") but it called all "card" connected component's
pcm_new/free, it was wrong.
This patch calls "rtd" connected component.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When ASoC driver is unbound dynamically during its operation (i.e. a
kind of hot-unplug), we may hit Oops due to the resource access after
the release by a delayed work, something like:
Unable to handle kernel paging request at virtual address dead000000000220
....
PC is at soc_dapm_dai_stream_event.isra.14+0x20/0xd0
LR is at snd_soc_dapm_stream_event+0x74/0xa8
....
[<ffff000008715610>] soc_dapm_dai_stream_event.isra.14+0x20/0xd0
[<ffff00000871989c>] snd_soc_dapm_stream_event+0x74/0xa8
[<ffff00000871b23c>] close_delayed_work+0x3c/0x50
[<ffff0000080bbd6c>] process_one_work+0x1ac/0x318
[<ffff0000080bbf20>] worker_thread+0x48/0x420
[<ffff0000080c201c>] kthread+0xfc/0x128
[<ffff0000080842f0>] ret_from_fork+0x10/0x18
For fixing the race, this patch adds a sync-point in pcm private_free
callback to finish the delayed work before actually releasing the
resources.
Reported-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
'Kbl Audio Headset Playback' FE DAI also needs SSP hw param fix.
Add this dai also to be handled in kabylake_ssp_fixup() call.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Make kirkwood_soc_platform const as it only passed to a const argument
of the function snd_soc_register_platform in the file referencing it.
Make the declaration const too.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Double NULL pointer check for ops and ops->func is difficult to read
and might be forget to check it if new func was add.
This patch adds new null_snd_soc_ops and use it if rtd->dai_link didn't
have it to avoid NULL ops, and reduces ops NULL check.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The kcontrol for the third input (rxN_mix1_inp3) of both RX2
and RX3 mixers are not using the correct control register. This simple
patch fixes this.
Signed-off-by: Jean-François Têtu <jean-francois.tetu@savoirfairelinux.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Make snd_soc_dapm_add_routes and snd_soc_dapm_del_routes use the
SND_SOC_DAPM_CLASS_RUNTIME dapm subclass to allow dynamic dapm route
updates.
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On soc_add_dai(), it uses null_dai_ops if driver doesn't have
its own ops. This means, dai->driver->ops never been NULL.
dai->driver->ops check is not needed.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On soc_add_dai(), it is checking dai->driver->xxx,
This means, dai->driver is mandatory, never been NULL.
dai->driver check is not needed.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
static soc_free_pcm_runtime() is never called with rtd == NULL.
This patch removes unnecessary rtd == NULL check from
soc_free_pcm_runtime().
Furthermore, NULL check before kfree() is not needed.
This patch removes such ckeck too.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For now reason the current card name is a ridiculous
'cherrytrailcraudio'. This isn't very useful or self-explanatory,
change to driver name cht-bsw-rt5672.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The code scans all components looking for the default name
i2c-10EC5670:00, which of course doesn't work in platforms
where the BIOS uses a different HID such as Dell 5585
Since we already have the correct information available, just
use the actual codec name and length.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Additional checks exposed a mistake in the quirk for the Dell Venue
Pro 5855 (Dmic2 instead of Dmic1). Rather than adding quirk tables,
merge all quirks in a single table and use flags to differentiate
platforms. Also add a parameter override to help support additional
platforms using this codec
CC: Bard Liao <bardliao@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the irq handler "rt5663_irq", while the codec is not initialized,
rt5663->codec will be null, and it will cause the kernel panic in the debug
print enabled.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, wm8998 has two input mux controls on IN1 and attempts to
switch these together when the A position is configured to be in digital
mode. This is because the digital mode requires pins from both the L and
R channels. However, this doesn't work as intended because whilst the
registers on the chip are changed the corresponding DAPM
representation is only updated for the mux actually being changed by the
user. The DAPM graph being out of sync with the hardware can cause some
odd issues with incorrect things being powered etc.
To avoid this issue and simplify the code somewhat, simply let the user
set the muxes as they desire. If they set an invalid configuration they
might not get audio from the DMIC but most of the chip requires you to
set a valid audio route to get audio.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The call to slk_tplg_fill_res_tkn is passing dir and pin_index in the
wrong order, they need to be in pin_index, dir order to match the function
slk_tplg_fill_res_tkn correctly.
Detected by CoveritScan, CID#1454992 ("Arguments in wrong order")
Fixes: f6fa56e225 ("ASoC: Intel: Skylake: Parse and update module config structure")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Tested-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
X32 ABI uses the 64bit timespec in addition to 64bit alignment of 64bit
values. We have added compat ABI for these ioctls, but this patch adds
one missing padding into 'struct snd_pcm_mmap_status_x32' to fix
incompatibilities.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
R-Car sound DMA will be used from SSI/SRC.
dma.c doesn't alloc DMA handler in .probe timing, because we don't
know what kind of DMA transfer will be used then.
Thus, SSI/SRC have *rsnd_mod for DMA. rsnd_dma_attach() will allocate
it and attach it to system.
It will be PIO mode if it can't alloc DMA handler.
In case of MIX is used, rsnd_dma_attach() will be called twice from SSI.
To avoid duplicate allocation, current rsnd_dma_attach() is checking
allocated DMA handler. This DMA related operation is a little bit
difficult to understand.
This patch adds new rsnd_dma_alloc() and separates allocation and attach
for readable code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_kasprintf() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_kasprintf() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_kasprintf() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Like other Plantronics devices, C310 and C520-M do not support sample
rate reading. Add them to the sample rate quirk accordingly.
BugLink: https://bugs.launchpad.net/bugs/1708499
BugLink: https://bugs.launchpad.net/bugs/1709282
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The output volume limits allow signals to be limited to specific levels
appropriate for the hardware attached. As this is a property of the
hardware itself these will be configured through device tree.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't use BUG_ON() for a non-critical sanity check on production
systems. This patch either removes useless BUG_ON() calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't use BUG_ON() for a non-critical sanity check on production
systems. This patch replaces with a softer WARN_ON() and an error
path.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't use BUG_ON() for a non-critical sanity check on production
systems. This patch replaces with a softer WARN_ON() and an error
path.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
hw_params may be fixup by be_hw_params_fixup, calling
soc_pcm_params_symmetry() before hw_params will have issue
if there is hw_params changes in be_hw_params_fixup.
For example, with following use case
1. a dai-link which is able to convert sample rate on BE side
2. set BE playback and capture sample rate to 44100Hz
3. play a 48000Hz audio stream with this dai-link
4. record from this dai-link with 44100Hz sample rate
Got following error message when record starts
[ 495.013527] be_link_ak4613: ASoC: unmatched rate symmetry: 48000 - 44100
[ 495.021729] be_link_ak4613: ASoC: hw_params BE failed -22
[ 495.028589] rsnd_link0: ASoC: hw_params BE failed -22
Because in soc_pcm_hw_params(), FE rate is still having value before
it is fixup by be_hw_params_fixup(), when soc_pcm_params_symmetry() checks
symmetry, thus soc_pcm_params_symmetry() complains about the unmatched rate
between the active stream and the new stream tries to start.
This patch moves soc_pcm_params_symmetry() after hw_params to resolve the
above issue.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Even though the tfa9879 driver can probe via device tree trough the
I2C core code, it is preferable to have explicit device tree
bindings instead [1], so add this support.
[1] https://www.spinics.net/lists/devicetree/msg195176.html
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
refactor snd_soc_dapm_new_pcm to reduce the size of
this function to facilitate further refactoring.
Signed-off-by: anish kumar <yesanishhere@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
w_param_text[count] is freed in the wrong error path.
Fix it by shifting the outfree_w_param label.
Signed-off-by: anish kumar <yesanishhere@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake,
KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital
Converter Control #3 needs to be set explicitly for HDMI/DisplayPort
High Bit Rate (HBR) audio playback to work. This was not required in
earlier platforms when HBR was first introduced. The ICT bits are
defined in Section 7.3.3.9 of the HDaudio 1.0a specification.
Since the ICT bitfield was not specified for HDAudio 1.0 devices
(before 2009), we only program it on machines more recent than
Haswell.
We tested that this fix is not needed on Baytrail-I (MinnowBoard
Turbot) and believe by extension it also does not apply to Braswell.
[ Moved AC_VERB_SET_DIGI_CONVERT_3 definition to the right place
by tiwai ]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Don't populate the read-only arrays div and pd on the stack,
instead make them static const. Makes the object code smaller by 210 bytes:
Before:
text data bss dec hex filename
2869 720 0 3589 e05 sound/soc/codecs/rl6231.o
After:
text data bss dec hex filename
2495 880 0 3375 d2f sound/soc/codecs/rl6231.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Line6 POD HD500X multi effect processor for playback
and capture (in/out audio) through USB.
Signed-off-by: Hans P. Moller <hmoller@uc.cl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make this const as it is only used during a copy operation. Also, make
it __initconst as it is only used during the init phase and after this
it is not referenced anywhere.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hm->h.size is intended to hold the actual size of the hm struct
that is copied from userspace and should always be <= sizeof(*hm).
However, after copy_from_user(hm, puhm, hm->h.size), since userspace
process has full control over the memory region pointed by puhm, it is
possible that the value of hm->h.size is different from what is fetched-in
previously (get_user(hm->h.size, (u16 __user *)puhm)). In other words,
hm->h.size is overriden and the relation between hm->h.size and the hm
struct is broken.
This patch proposes to use a seperate variable, msg_size, to hold
the value of the first fetch and override hm->h.size to msg_size
after the second fetch to maintain the relation.
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for the new ac97 bus model, where devices are automatically
discovered on AC-Links.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a private data structure. This is a preparation for a codec which
would need an another data on top of snd_ac97, which will be the case
when an MFD wm97xx device will probe wm9705.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the new ac97 bus model, where devices are automatically
discovered on AC-Links.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the new ac97 bus model, where devices are automatically
discovered on AC-Links.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No file in sound/soc/intel/ use any miscdevice.
This patch remove this uncessary include.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_gpiod_get is called with GPIOF_OUT_INIT_LOW but the function doesn't
allow the parameters. Unluckily, GPIOF_OUT_INIT_LOW is same value as
GPIOD_ASIS and gpio direction isn't set properly.
Muted stream comes up when I try recording some sounds on TM2. mic-bias
gpiod state can't be changed because the gpiod is created with the invalid
parameter. The gpio should be set GPIOD_OUT_HIGH.
Fixes: 1bfbc260a5 ("ASoC: samsung: Add machine driver for Exynos5433 based TM2 board")
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add specific cpu_dai_name to dai_link because samsung i2s driver registers
two dais and components. Selecting one of them clearly is needed more
information like cpu_dai_name, of_node. The reason why the dai_links have
to use 'samsung-i2s' for cpu_dai is that 'samsung-i2s-sec' doesn't have a
capture functionality.
Without this code, cpu_dai will be selected the first one of the
component_list. For example, if I describe nothing to cpu_dai_name,
'samsung-i2s-sec' might be selected to HiFi Primay.
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add specific dais name when components are registered. Component and dai
name will follow their parent dev name, if the name isn't described. In
case of this driver, each dais will have same name like '11440000.i2s0' by
fmt_single_name function.
The problem having same name is that TM2 machine driver can't detect
capture devices correctly. Machine driver doesn't know which one is proper
to use for cpu dai. The driver just selects to use 'samsung-i2c-sec' that
doesn't have capture functionality because the component of
samsung-i2s-sec is located in the first of the component_list.
I add dai name like 'samsung-i2s', 'samsung-i2s-sec' for each dais. The
reason why adding dai id to 1 is that it doesn't allow to use particular
dai name in case of when I use 0 for dai id.
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently all the audio related device tree entries are handled by the
MFD code, for most parts of the Arizona driver we group the device
tree handling with the component that uses it and should do so here as
well.
Add handling in the ASoC code for the audio device tree entries, a
later patch removes the MFD side handling but there is no harm in it
being duplicated temporarily.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Chintan Patel