Add a helper that validates the startblock is valid. This checks for a
non-zero block on the main device, but skips that check for blocks on
the realtime device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of a magic flag for xfs_trans_alloc, just ensure all callers
that can't relclaim through the file system use memalloc_nofs_save to
set the per-task nofs flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.
nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this. I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rework the data flow in xfs_file_iomap_begin where we decide if we have
to break shared extents.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Don't pass raw iomap flags to xfs_reflink_allocate_cow; signal our
intention with a boolean argument.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a mode where XFS never overwrites existing blocks in place. This
is to aid debugging our COW code, and also put infatructure in place
for things like possible future support for zoned block devices, which
can't support overwrites.
This mode is enabled globally by doing a:
echo 1 > /sys/fs/xfs/debug/always_cow
Note that the parameter is global to allow running all tests in xfstests
easily in this mode, which would not easily be possible with a per-fs
sysfs file.
In always_cow mode persistent preallocations are disabled, and fallocate
will fail when called with a 0 mode (with our without
FALLOC_FL_KEEP_SIZE), and not create unwritten extent for zeroed space
when called with FALLOC_FL_ZERO_RANGE or FALLOC_FL_UNSHARE_RANGE.
There are a few interesting xfstests failures when run in always_cow
mode:
- generic/392 fails because the bytes used in the file used to test
hole punch recovery are less after the log replay. This is
because the blocks written and then punched out are only freed
with a delay due to the logging mechanism.
- xfs/170 will fail as the already fragile file streams mechanism
doesn't seem to interact well with the COW allocator
- xfs/180 xfs/182 xfs/192 xfs/198 xfs/204 and xfs/208 will claim
the file system is badly fragmented, but there is not much we
can do to avoid that when always writing out of place
- xfs/205 fails because overwriting a file in always_cow mode
will require new space allocation and the assumption in the
test thus don't work anymore.
- xfs/326 fails to modify the file at all in always_cow mode after
injecting the refcount error, leading to an unexpected md5sum
after the remount, but that again is expected
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
No user of it in the iomap code at the moment, but we should not
actively report wrong information if we can trivially get it right.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Besides simplifying the code a bit this allows to actually implement
the behavior of using COW preallocation for non-COW data mentioned
in the current comments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
While using delalloc for extsize hints is generally a good idea, the
current code that does so only for COW doesn't help us much and creates
a lot of special cases. Switch it to use real allocations like we
do for direct I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We speculatively allocate extents in the COW fork to reduce
fragmentation. But when we write data into such COW fork blocks that
do now shadow an allocation in the data fork SEEK_DATA will not
correctly report it, as it only looks at the data fork extents.
The only reason why that hasn't been an issue so far is because
we even use these speculative COW fork preallocations over holes in
the data fork at all for buffered writes, and blocks in the COW
fork that are written by direct writes are moved into the data
fork immediately at I/O completion time.
Add a new set of iomap_ops for SEEK_HOLE/SEEK_DATA which looks into
both the COW and data fork, and reports all COW extents as unwritten
to the iomap layer. While this isn't strictly true for COW fork
extents that were already converted to real extents, the practical
semantics that you can't read data from them until they are moved
into the data fork are very similar, and this will force the iomap
layer into probing the extents for actually present data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move checking for invalid zero blocks and setting of various iomap flags
into this helper. Also make it deal with "raw" delalloc extents to
avoid clutter in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This function is a small wrapper only used by the writeback code, so
move it together with the writeback code and simplify it down to the
glorified do { } while loop that is now is.
A few bits intentionally got lost here: no need to call xfs_qm_dqattach
because quotas are always attached when we create the delalloc
reservation, and no need for the imap->br_startblock == 0 check given
that xfs_bmapi_convert_delalloc already has a WARN_ON_ONCE for exactly
that condition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This way we can actually count how many bytes got converted and how many
calls we need, unlike in the caller which doesn't have the detailed
view.
Note that this includes a slight change in behavior as the
xs_xstrat_quick is now bumped for every allocation instead of just the
one covering the requested writeback offset, which makes a lot more
sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
No need to deal with the transaction and the inode locking in the
caller. Note that we also switch to passing whichfork as the second
paramter, matching what most related functions do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The io_type field contains what is basically a summary of information
from the inode fork and the imap. But we can just as easily use that
information directly, simplifying a few bits here and there and
improving the trace points.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The writeback delalloc conversion code is racy with respect to
changes in the currently cached file mapping outside of the current
page. This is because the ilock is cycled between the time the
caller originally looked up the mapping and across each real
allocation of the provided file range. This code has collected
various hacks over the years to help combat the symptoms of these
races (i.e., truncate race detection, allocation into hole
detection, etc.), but none address the fundamental problem that the
imap may not be valid at allocation time.
Rather than continue to use race detection hacks, update writeback
delalloc conversion to a model that explicitly converts the delalloc
extent backing the current file offset being processed. The current
file offset is the only block we can trust to remain once the ilock
is dropped because any operation that can remove the block
(truncate, hole punch, etc.) must flush and discard pagecache pages
first.
Modify xfs_iomap_write_allocate() to use the xfs_bmapi_delalloc()
mechanism to request allocation of the entire delalloc extent
backing the current offset instead of assuming the extent passed by
the caller is unchanged. Record the range specified by the caller
and apply it to the resulting allocated extent so previous checks by
the caller for COW fork overlap are not lost. Finally, overload the
bmapi delalloc flag with the range reval flag behavior since this is
the only use case for both.
This ensures that writeback always picks up the correct
and current extent associated with the page, regardless of races
with other extent modifying operations. If operating on a data fork
and the COW overlap state has changed since the ilock was cycled,
the caller revalidates against the COW fork sequence number before
using the imap for the next block.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The writeback code caches the current extent mapping across multiple
xfs_do_writepage() calls to avoid repeated lookups for sequential
pages backed by the same extent. This is known to be slightly racy
with extent fork changes in certain difficult to reproduce
scenarios. The cached extent is trimmed to within EOF to help avoid
the most common vector for this problem via speculative
preallocation management, but this is a band-aid that does not
address the fundamental problem.
Now that we have an xfs_ifork sequence counter mechanism used to
facilitate COW writeback, we can use the same mechanism to validate
consistency between the data fork and cached writeback mappings. On
its face, this is somewhat of a big hammer approach because any
change to the data fork invalidates any mapping currently cached by
a writeback in progress regardless of whether the data fork change
overlaps with the range under writeback. In practice, however, the
impact of this approach is minimal in most cases.
First, data fork changes (delayed allocations) caused by sustained
sequential buffered writes are amortized across speculative
preallocations. This means that a cached mapping won't be
invalidated by each buffered write of a common file copy workload,
but rather only on less frequent allocation events. Second, the
extent tree is always entirely in-core so an additional lookup of a
usable extent mostly costs a shared ilock cycle and in-memory tree
lookup. This means that a cached mapping reval is relatively cheap
compared to the I/O itself. Third, spurious invalidations don't
impact ioend construction. This means that even if the same extent
is revalidated multiple times across multiple writepage instances,
we still construct and submit the same size ioend (and bio) if the
blocks are physically contiguous.
Update struct xfs_writepage_ctx with a new field to hold the
sequence number of the data fork associated with the currently
cached mapping. Check the wpc seqno against the data fork when the
mapping is validated and reestablish the mapping whenever the fork
has changed since the mapping was cached. This ensures that
writeback always uses a valid extent mapping and thus prevents lost
writebacks and stale delalloc block problems.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We only need to allocate blocks for zeroing for reflink inodes,
and for we currently have a special case for reflink files in
the otherwise direct I/O path that I'd like to get rid of.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This adds ordering of the updates and makes sure we always see the if_seq
update before the extent tree is modified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inodes that are held across deferred operations are explicitly
joined to the dfops structure to ensure appropriate relogging.
While inodes are currently joined explicitly, we can detect the
conditions that require relogging at dfops finish time by inspecting
the transaction item list for inodes with ili_lock_flags == 0.
Replace the xfs_defer_ijoin() infrastructure with such detection and
automatic relogging of held inodes. This eliminates the need for the
per-dfops inode list, replaced by an on-stack variant in
xfs_defer_trans_roll().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Log items that require relogging during deferred operations
processing are explicitly joined to the associated dfops via the
xfs_defer_*join() helpers. These calls imply that the associated
object is "held" by the transaction such that when rolled, the item
can be immediately joined to a follow up transaction. For buffers,
this means the buffer remains locked and held after each roll. For
inodes, this means that the inode remains locked.
Failure to join a held item to the dfops structure means the
associated object pins the tail of the log while dfops processing
completes, because the item never relogs and is not unlocked or
released until deferred processing completes.
Currently, all buffers that are held in transactions (XFS_BLI_HOLD)
with deferred operations are explicitly joined to the dfops. This is
not the case for inodes, however, as various contexts defer
operations to transactions with held inodes without explicit joins
to the associated dfops (and thus not relogging).
While this is not a catastrophic problem, it is not ideal. Given
that we want to eventually relog such items automatically during
dfops processing, start by explicitly adding these missing
xfs_defer_ijoin() calls. A call is added everywhere an inode is
joined to a transaction without transferring lock ownership and
said transaction runs deferred operations.
All xfs_defer_ijoin() calls will eventually be replaced by automatic
dfops inode relogging. This patch essentially implements the
behavior change that would otherwise occur due to automatic inode
dfops relogging.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Used the per-fork sequence counter to avoid lookups in the writeback code
unless the COW fork actually changed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
At this point, the transaction subsystem completely manages deferred
items internally such that the common and boilerplate
xfs_trans_alloc() -> xfs_defer_init() -> xfs_defer_finish() ->
xfs_trans_commit() sequence can be replaced with a simple
transaction allocation and commit.
Remove all such boilerplate deferred ops code. In doing so, we
change each case over to use the dfops in the transaction and
specifically eliminate:
- The on-stack dfops and associated xfs_defer_init() call, as the
internal dfops is initialized on transaction allocation.
- xfs_bmap_finish() calls that precede a final xfs_trans_commit() of
a transaction.
- xfs_defer_cancel() calls in error handlers that precede a
transaction cancel.
The only deferred ops calls that remain are those that are
non-deterministic with respect to the final commit of the associated
transaction or are open-coded due to special handling.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All but one caller of xfs_defer_init() passes in the ->t_firstblock
of the associated transaction. The one outlier is
xlog_recover_process_intents(), which simply passes a dummy value
because a valid pointer is required. This firstblock variable can
simply be removed.
At this point we could remove the xfs_defer_init() firstblock
parameter and initialize ->t_firstblock directly. Even that is not
necessary, however, because ->t_firstblock is automatically
reinitialized in the new transaction on a transaction roll. Since
xfs_defer_init() should never occur more than once on a particular
transaction (since the corresponding finish will roll it), replace
the reinit from xfs_defer_init() with an assert that verifies the
transaction has a NULLFSBLOCK firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers pass ->t_firstblock from the current transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Convert all xfs_bmapi_write() users to ->t_firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Most callers of xfs_defer_init() immediately attach the dfops
structure to a transaction. Add a transaction parameter to eliminate
much of this boilerplate code. This also helps self-document the
fact that many codepaths now expect a dfops pointer implicitly via
xfs_trans->t_dfops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that all callers use ->t_dfops, the xfs_bmapi_write() dfops
parameter is no longer necessary. Remove it and access ->t_dfops
directly. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Attach ->t_dfops for all remaining callers of xfs_bmapi_write().
This prepares the latter to no longer require a separate dfops
parameter.
Note that xfs_symlink() already uses ->t_dfops. Fix up the local
references for consistency.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Switch to using the iomap_page structure for checking sub-page uptodate
status and track sub-page I/O completion status, and remove large
quantities of boilerplate code working around buffer heads.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Disable the IOMAP_F_BUFFER_HEAD flag on file systems with a block size
equal to the page size, and deal with pages without buffer heads in
writeback. Thanks to the previous refactoring this is basically trivial
now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both callers want the same looking, so do it only once.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
For now just limited to blocksize == PAGE_SIZE, where we can simply read
in the full page in write begin, and just set the whole page dirty after
copying data into it. This code is enabled by default and XFS will now
be feed pages without buffer heads in ->writepage and ->writepages.
If a file system sets the IOMAP_F_BUFFER_HEAD flag on the iomap the old
path will still be used, this both helps the transition in XFS and
prepares for the gfs2 migration to the iomap infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Get rid of the MIN/MAX macros and just use the native min/max macros
directly in the XFS code.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/
This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:
for f in `git grep -l "GNU General" fs/xfs/` ; do
echo $f
cat $f | awk -f hdr.awk > $f.new
mv -f $f.new $f
done
And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:
$ cat hdr.awk
BEGIN {
hdr = 1.0
tag = "GPL-2.0"
str = ""
}
/^ \* This program is free software/ {
hdr = 2.0;
next
}
/any later version./ {
tag = "GPL-2.0+"
next
}
/^ \*\// {
if (hdr > 0.0) {
print "// SPDX-License-Identifier: " tag
print str
print $0
str=""
hdr = 0.0
next
}
print $0
next
}
/^ \* / {
if (hdr > 1.0)
next
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
next
}
/^ \*/ {
if (hdr > 0.0)
next
print $0
next
}
// {
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
}
END { }
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are two uses of dqget here -- one is to return the dquot for a
given type and id, and the other is to return the dquot for a given type
and inode. Those are two separate things, so split them into two
smaller functions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The flags argument is always zero, get rid of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rather than checking what kind of locking is needed in a helper
function and then jumping through hoops to do the locking in line,
move the locking to the helper function that does all the checks
and rename it to xfs_ilock_for_iomap().
This also allows us to hoist all the nonblocking checks up into the
locking helper, further simplifier the code flow in
xfs_file_iomap_begin() and making it easier to understand.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current logic that determines whether allocation should be done
has grown somewhat spaghetti like with the addition of IOMAP_NOWAIT
functionality. Separate out each of the different cases into single,
obvious checks to get rid most of the nested IOMAP_NOWAIT checks
in the allocation logic.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Fix xfs_file_iomap_begin to trylock the ilock if IOMAP_NOWAIT is passed,
so that we don't block io_submit callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no reason to take the ilock exclusively at the start of
xfs_file_iomap_begin for direct I/O, given that it will be demoted
just before calling xfs_iomap_write_direct anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The iomap zeroing interface is smart enough to skip zeroing holes or
unwritten extents. Don't subvert this logic for reflink files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Fix some integer overflow problems if offset + count happen to be large
enough to cause an integer overflow.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Historically, the XFS iomap_begin function only returned mappings for
exactly the range queried, i.e. it doesn't do XFS_BMAPI_ENTIRE lookups.
The current vfs iomap consumers are only set up to deal with trimmed
mappings. xfs_xattr_iomap_begin does BMAPI_ENTIRE lookups, which is
inconsistent with the current iomap usage. Remove the flag so that both
iomap_begin functions behave the same way.
FWIW this also fixes a behavioral regression in xattr FIEMAP that was
introduced in 4.8 wherein attr fork extents are no longer trimmed like
they used to be.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
* Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may be
required to satisfy a write fault to also be flushed ("on disk") before
the kernel returns to userspace from the fault handler. Effectively
every write-fault that dirties metadata completes an fsync() before
returning from the fault handler. The new MAP_SHARED_VALIDATE mapping
type guarantees that the MAP_SYNC flag is validated as supported by the
filesystem's ->mmap() file operation.
* Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This
enables interoperability with environments that only implement the
standardized methods.
* Add support for the ACPI 6.2 NVDIMM media error injection methods.
* Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch
last shutdown status, firmware update, SMART error injection, and
SMART alarm threshold control.
* Cleanup physical address information disclosures to be root-only.
* Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
* Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
957ac8c421 dax: fix PMD faults on zero-length files
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
a39e596baa xfs: support for synchronous DAX faults
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
7b565c9f96 xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----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=h2vZ
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"Save for a few late fixes, all of these commits have shipped in -next
releases since before the merge window opened, and 0day has given a
build success notification.
The ext4 touches came from Jan, and the xfs touches have Darrick's
reviewed-by. An xfstest for the MAP_SYNC feature has been through
a few round of reviews and is on track to be merged.
- Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may
be required to satisfy a write fault to also be flushed ("on disk")
before the kernel returns to userspace from the fault handler.
Effectively every write-fault that dirties metadata completes an
fsync() before returning from the fault handler. The new
MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag
is validated as supported by the filesystem's ->mmap() file
operation.
- Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods.
This enables interoperability with environments that only implement
the standardized methods.
- Add support for the ACPI 6.2 NVDIMM media error injection methods.
- Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for
latch last shutdown status, firmware update, SMART error injection,
and SMART alarm threshold control.
- Cleanup physical address information disclosures to be root-only.
- Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
- Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
- 957ac8c421 ("dax: fix PMD faults on zero-length files"):
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
- a39e596baa ("xfs: support for synchronous DAX faults") and
7b565c9f96 ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()")
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>"
* tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits)
acpi, nfit: add 'Enable Latch System Shutdown Status' command support
dax: fix general protection fault in dax_alloc_inode
dax: fix PMD faults on zero-length files
dax: stop requiring a live device for dax_flush()
brd: remove dax support
dax: quiet bdev_dax_supported()
fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core
tools/testing/nvdimm: unit test clear-error commands
acpi, nfit: validate commands against the device type
tools/testing/nvdimm: stricter bounds checking for error injection commands
xfs: support for synchronous DAX faults
xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
ext4: Support for synchronous DAX faults
ext4: Simplify error handling in ext4_dax_huge_fault()
dax: Implement dax_finish_sync_fault()
dax, iomap: Add support for synchronous faults
mm: Define MAP_SYNC and VM_SYNC flags
dax: Allow tuning whether dax_insert_mapping_entry() dirties entry
dax: Allow dax_iomap_fault() to return pfn
dax: Fix comment describing dax_iomap_fault()
...
Christoph Hellwig