During kernel init, the AM3505/AM3517 UART4 cannot complete its softreset:
omap_hwmod: uart4: softreset failed (waited 10000 usec)
This also results in another warning later in the boot process:
omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state
From empirical observation, the AM35xx UART4 IP block requires either
uart1_fck or uart2_fck to be enabled while UART4 resets. Otherwise
the reset will never complete. So this patch adds uart1_fck as an
optional clock for UART4 and adds the appropriate hwmod flag to cause
uart1_fck to be enabled during the reset process. (The choice of
uart1_fck over uart2_fck was arbitrary.)
Unfortunately this observation raises many questions. Is it necessary
for uart1_fck or uart2_fck to be controlled with uart4_fck for the
UART4 to work correctly? What exactly do the AM35xx UART4 clock
tree and the related PRCM idle management FSMs look like? If anyone
has the ability to answer these questions through empirical functional
testing, or hardware information from the AM35xx designers, it would
be greatly appreciated.
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Kyle Manna <kyle.manna@fuel7.com>
Cc: Mark A. Greer <mgreer@animalcreek.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Mark A. Greer <mgreer@animalcreek.com>
Add missing terminators to the arrays of IRQ, DMA, and address space
structure records in the AM35xx UART4 hwmod data. Without these
terminators, the following warnings appear on boot:
omap_uart.3: failed to claim resource 58
omap_device: omap_uart: build failed (-16)
WARNING: at /home/paul/linux/arch/arm/mach-omap2/serial.c:375 omap_serial_init_port+0x198/0x284()
Could not build omap_device for omap_uart: uart4.
Also, AM35xx uart4_fck has an incorrect parent clock pointer. Fix it
and clean up a whitespace issue.
Fix some incorrectly-named macros related to AM35xx UART4.
Cc: Kyle Manna <kyle.manna@fuel7.com>
Cc: Mark A. Greer <mgreer@animalcreek.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Mark A. Greer <mgreer@animalcreek.com>
Partially fix the hwmod data for the AM35xx USB OTG hwmod. This
should resolve the following boot warning on AM35xx platforms:
omap_hwmod: am35x_otg_hs: cannot be enabled for reset (3)
While here, also fix the clkdev records, to avoid warnings about
duplicate clock aliases.
The hwmod is also connected to the wrong interconnect. It should be
connected to the IPSS, not the L4 CORE. But that is left for a future
fix, since it probably has a dependency on some hwmod core changes.
Cc: Felipe Balbi <balbi@ti.com>
Cc: Hema HK <hemahk@ti.com>
Cc: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Mark A. Greer <mgreer@animalcreek.com>
Pull KVM fixes from Avi Kivity:
"Fixing a scheduling-while-atomic bug in the ppc code, and a bug which
allowed pci bridges to be assigned to guests."
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_page
KVM: Fix PCI header check on device assignment
- Fixes to new ocrdma driver
- Typo in test in CMA
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABCAAGBQJP5wISAAoJEENa44ZhAt0hWzAQAIV1qnXTz+HDXzz8MLTX8wR0
6uUAcGxuP1PXB4K+DmYc7Ht0FnvJN0E9KN7cCDo20XbZU9NzXkqP36WL3fWt5+34
9YKQYK14Rbi65ex+UwbASnyZ35iuNjPSVnnnEWMAoE3ZmEXWdM9FzIX41xav+FTy
Lw0qIVO28d6Rx9LiODnNgbDqqyPzgqmam6SQszcfDwm+PqgcI/RaI/578GY+88qA
+qofgDpL5rnzyWa2GMIGlbB21xKlqlhF3GuSSp5hHmDCaiNtfS0KsyHE+ys6r1UC
uLKkBxlXngPF//DWFPUVVwXLHSHgtQ7qfHbk2kUqZjhrt/Famdju16q5oRSLiVrW
MoilOEMzbt0AaRn2tEQ4srXHvhNnHkxQsPlSZ+alMWRDZS1jf4ESMOj+V+4gUUUQ
+xYhyLge3GBUE8qt+zerbmLqRcyG6bF3HHMGFKJZrh3up++yZgZF/E5UXFTLYOv5
6j9sG+dELFgtAhbC13ysvj5IyiVrFl3oh7Ynf2q5/Fyo2yPtde/hk+TGzXwRFOQg
WF9SjnQsM3LsXhSX0D30kcjE76pCAcy6SyhE5FKA+mumyf7HG+UC+1lo2bUfNqO0
HAXcgsc7wGXoOvBO1YOCmpUTyWrCQT3OikltDibnWdoUYpfaYFAiWJKdtLA0HylK
3QJBh6/0/QGS5WhKr0KD
=LFia
-----END PGP SIGNATURE-----
Merge tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Pull InfiniBand/RDMA fixes from Roland Dreier:
- Fixes to new ocrdma driver
- Typo in test in CMA
* tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA/cma: QP type check on received REQs should be AND not OR
RDMA/ocrdma: Fix off by one in ocrdma_query_gid()
RDMA/ocrdma: Fixed RQ error CQE polling
RDMA/ocrdma: Correct queue SGE calculation
RDMA/ocrdma: Correct reported max queue sizes
RDMA/ocrdma: Fixed GID table for vlan and events
Nothing very controversial in here. Most of the fixes are for OMAP this time
around, with some orion/kirkwood and a tegra patch mixed in.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJP5k/mAAoJEIwa5zzehBx3WkYQAKqiFgS2SeVXiQbRFKm9rMlj
htGOkMmtBsMG3oT3rRXcYU77DiokdkonFqFcy10GNYS1GnC+kDw9dEUCh1B16UV1
b/sNA+XIU8aqxGXrlys1HaIxoAvTsHA5ohL3oMrB1djqESfopdI/vpHPK8WZ+aXn
6Kf/47miVOTokGywdg2l+irKM2WqndnV0z880Hrfqsk/6t07TzCUhmDS8kXS+2kb
TDhlz8SL/FaU58AAVIcMK+YCvL+uQjLkbYAtqO5zEbKTzvf9CK68UrBqqr0EgKys
nO/NozwBYfQUjQdzAjhauYbFuVTU/nnamE2gM4yEHB1Q7pkICkHle9dprufrKefB
B70MZXikExuxn72jhQrE8SL/UA6UGQedZkXlRYT/E+o24eCUaPaG0AwDyFeahC7J
FkAWX/lvxWWRO6xs35BNfvUBzAOsOySEUz9J2JEmZpz3GXmgf+lM3fAgi6uSFNKH
KNjCIVrRcbz0CNiR991EVLguaZ6Oj4ZdS1iV4Msr7j8NMOIG54SLqDskdF1FmmtO
2BzVqfDRqxvItfKLTuGrG8mghaeSCbZbzsIvHVFeZOJXU4NTyMVF6DxIYrJ55iwt
yYvUYKEer8U0MEpg5kdNuzvwIFq/fqRdpAUGYGD4biikLDo5vmmKvEqBZPDtuaPh
Qec+Dcvudm+r5QZKw2ge
=6Ahb
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Nothing very controversial in here. Most of the fixes are for OMAP
this time around, with some orion/kirkwood and a tegra patch mixed in."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: Orion: Fix Virtual/Physical mixup with watchdog
ARM: Kirkwood: clk_register_gate_fn: add fn assignment
ARM: Orion5x - Restore parts of io.h, with rework
ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled
ARM: OMAP2+: mux: fix sparse warning
ARM: OMAP2+: CM: increase the module disable timeout
ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks
ARM: OMAP4: hwmod data: fix 32k sync timer idle modes
ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby
ARM: OMAP: Fix Beagleboard DVI reset gpio
arm/dts: OMAP2: Fix interrupt controller binding
ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0
ARM: OMAP2+: Fix MUSB ifdefs for platform init code
ARM: tegra: make tegra_cpu_reset_handler_enable() __init
ARM: OMAP: PM: Lock clocks list while generating summary
ARM: iconnect: Remove include of removed linux/spi/orion_spi.h
Pull drm fixes from Dave Airlie:
"Nothing major in here, one radeon SI fix for tiling, and one uninit
var fix, two minor header file fixes."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: drop comment about this header being autogenerated.
drm/edid: don't return stack garbage from supports_rb
vga_switcheroo: Add include guard
drm/radeon: SI tiling fixes for display
The orion watchdog is expecting to be passed the physcial address of
the hardware, and will ioremap() it to give a virtual address it will
use as the base address for the hardware. However, when creating the
platform resource record, a virtual address was being used.
Add the necassary #define's so we can pass the physical address as
expected.
Tested on Kirkwood and Orion5x.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Olof Johansson <olof@lixom.net>
In commit:
98d9986 ARM: Kirkwood: Replace clock gating
the kirkwood clock gating has been reworked. A custom variant of
clock gating, that calls a custom function before gating the clock
off, has been introduced. However in clk_register_gate_fn() this
custom function "fn" is never assigned.
This patch adds the missing fn assignment.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 4d5fc58dbe (ARM: remove bunch of
now unused mach/io.h files) removed the orion5x io.h. Unfortunately,
this is still needed for the definition of IO_SPACE_LIMIT which
overrides the default 64K. All Orion based systems have 1Mbyte of IO
space per PCI[e] bus, and try to request_resource() this size. Orion5x
has two such PCI buses.
It is likely that the original, removed version, was broken. This
version might be less broken. However, it has not been tested on
hardware with a PCI card, let alone hardware with a PCI card with IO
capabilities.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
reset. All of them are regression fixes, except for the missing omap2
interrupt controller binding that somehow got missed earlier.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=cMPJ
-----END PGP SIGNATURE-----
Merge tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
"Here are a few fixes with the biggest one being fix for Beagle DVI
reset. All of them are regression fixes, except for the missing omap2
interrupt controller binding that somehow got missed earlier."
* tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: Fix Beagleboard DVI reset gpio
arm/dts: OMAP2: Fix interrupt controller binding
ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0
ARM: OMAP2+: Fix MUSB ifdefs for platform init code
Pull Ceph fixes from Sage Weil:
"There are a couple of fixes from Yan for bad pointer dereferences in
the messenger code and when fiddling with page->private after page
migration, a fix from Alex for a use-after-free in the osd client
code, and a couple fixes for the message refcounting and shutdown
ordering."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: flush msgr queue during mon_client shutdown
rbd: Clear ceph_msg->bio_iter for retransmitted message
libceph: use con get/put ops from osd_client
libceph: osd_client: don't drop reply reference too early
ceph: check PG_Private flag before accessing page->private
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=QLde
-----END PGP SIGNATURE-----
Merge tag 'for-linus-Jun-21-2012' of git://oss.sgi.com/xfs/xfs
Pull XFS fixes from Ben Myers:
- Fix stale data exposure with unwritten extents
- Fix a warning in xfs_alloc_vextent with ODEBUG
- Fix overallocation and alignment of pages for xfs_bufs
- Fix a cursor leak
- Fix a log hang
- Fix a crash related to xfs_sync_worker
- Rename xfs log structure from struct log to struct xlog so we can use
crash dumps effectively
* tag 'for-linus-Jun-21-2012' of git://oss.sgi.com/xfs/xfs:
xfs: rename log structure to xlog
xfs: shutdown xfs_sync_worker before the log
xfs: Fix overallocation in xfs_buf_allocate_memory()
xfs: fix allocbt cursor leak in xfs_alloc_ag_vextent_near
xfs: check for stale inode before acquiring iflock on push
xfs: fix debug_object WARN at xfs_alloc_vextent()
xfs: xfs_vm_writepage clear iomap_valid when !buffer_uptodate (REV2)
Pull perf updates from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ftrace: Make all inline tags also include notrace
perf: Use css_tryget() to avoid propping up css refcount
perf tools: Fix synthesizing tracepoint names from the perf.data headers
perf stat: Fix default output file
perf tools: Fix endianity swapping for adds_features bitmask
As per the OMAP4 documentation, audio over HDMI must be transmitted in
no-idle mode. This patch adds the HWMOD_SWSUP_SIDLE so that omap_hwmod uses
no-idle/force-idle settings instead of smart-idle mode.
This is required as the DSS interface clock is used as functional clock
for the HDMI wrapper audio FIFO. If no-idle mode is not used, audio could
be choppy, have bad quality or not be audible at all.
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
[b-cousson@ti.com: Update the subject and align the .flags
location with the script template]
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Commit bbd707acee ("ARM: omap2: use
machine specific hook for late init") resulted in the addition of this
sparse warning:
arch/arm/mach-omap2/mux.c:791:12: warning: symbol 'omap_mux_late_init' was not declared. Should it be static?
Fix by including the header file containing the prototype.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Increase the timeout for disabling an IP block to five milliseconds.
This is to handle the usb_host_fs idle latency, which takes almost
four milliseconds after a host controller reset.
This is the second of two patches needed to resolve the following
boot warning:
omap_hwmod: usb_host_fs: _wait_target_disable failed
Thanks to Sergei Shtylyov <sshtylyov@mvista.com> for finding
an unrelated hunk in a previous version of this patch.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: Tero Kristo <t-kristo@ti.com>
Until the OMAP4 code is converted to disable the use of the clock
framework-based clockdomain enable/disable sequence, any clock used as
a hwmod main_clk must have a clockdomain associated with it. This
patch populates some clock structure clockdomain names to resolve the
following warnings during kernel init:
omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
omap_hwmod: trace_clk_div_ck: missing clockdomain for trace_clk_div_ck.
omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
omap_hwmod: ddrphy_ck: missing clockdomain for ddrphy_ck.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
The 32k sync timer IP block target idle modes in the hwmod data are
incorrect. The IP block does not support any smart-idle modes.
Update the data to reflect the correct modes.
This problem was initially identified and a diff fragment posted to
the lists by Benoît Cousson <b-cousson@ti.com>. A patch description
bug in the first version was also identified by Benoît.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
If an IP is configured in Smart-Standby-Wakeup, when disabling wakeup feature the
IP will not go back to Smart-Standby, but will remain in Smart-Standby-Wakeup.
Signed-off-by: Djamil Elaidi <d-elaidi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Fixes include:
- Fix a write hang due to an uninitalised variable when !defined(CONFIG_NFS_V4)
- Address upcall races in the legacy NFSv4 idmapper
- Remove an O_DIRECT refcounting issue
- Fix a pNFS refcounting bug when the file layout metadata server is also
acting as a data server
- Fix a pNFS module loading race.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJP46PEAAoJEGcL54qWCgDyClwP/RlcSUAgTeFo3VFcedMdZqKN
cdYzzyT2r0rzxtEOkdE1aFqukspMTx6cU83opHYJKYP66stkx98JW0+LVcsg8vtm
SKjYZRAM/xsZVo+m8E3iQ9Z7K0kn1W/+OSwzJO7arIqo++fV8aiGn4+Gpgx9SrWS
FU5iC7p1LThOZks3Nis0VLbLDpS058vRJgyfCzTS1NyjABHOOEYb6JhhkYeXLH7G
vn0QRGXyq2sGxUYhR3BNWdRMn9XV5p5mOUoVjLxPBV84gm7wIjYKOGJHQRSn4Ew/
CEYAvBksGpT7ifJflkzgg8acVSvuq7HacMpHj9O9SpT5aesvVuhcm3pxUN1YJo6m
WNRj3kqgc6eCuIbiA+ENZuHIsLDzOFw3H4RhKCPj7C9HG88nFGIhrGJ9OIIut1AF
X81L5aTox3UASZXuieZ0dAqVyTH7n288SSTzYaYy5O++4cW4hqZt7wQegr8Sk6b9
8zrWXkLjTNGFZo3mAhlgZf5qV3UYt/yNCk9U/1JxvH+1tPTvfYpqavdXusMJ03rn
7z4LQxwD93YhkiD8NNGDHoBoZesmE3E0ucug+Cb1wLeT0b0C9ChOYdAphQkXxkNl
lJxN4TfoBCgwwQx88Z/UilNvIGffJwVZzRgX6y//WACPssCdM5S0Zlb8nGIGb98G
J2uFwuqP0WNhMPSbg+Wj
=uEPz
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.5-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Fix a write hang due to an uninitalised variable when
!defined(CONFIG_NFS_V4)
- Address upcall races in the legacy NFSv4 idmapper
- Remove an O_DIRECT refcounting issue
- Fix a pNFS refcounting bug when the file layout metadata server is
also acting as a data server
- Fix a pNFS module loading race.
* tag 'nfs-for-3.5-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Force the legacy idmapper to be single threaded
NFS: Initialise commit_info.rpc_out when !defined(CONFIG_NFS_V4)
NFS: Fix a refcounting issue in O_DIRECT
NFSv4.1: Fix a race in set_pnfs_layoutdriver
NFSv4.1: Fix umount when filelayout DS is also the MDS
Pull btrfs fixes from Chris Mason:
"This is a small pull with btrfs fixes. The biggest of the bunch is
another fix for the new backref walking code.
We're still hammering out one btrfs dio vs buffered reads problem, but
that one will have to wait for the next rc."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: delay iput with async extents
Btrfs: add a missing spin_lock
Btrfs: don't assume to be on the correct extent in add_all_parents
Btrfs: introduce btrfs_next_old_item
Two minor fixes in emc2103 and applesmc drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=kDRE
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Two minor fixes in emc2103 and applesmc drivers."
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (emc2103) Fix use of an uninitilized variable in error case
hwmon: (applesmc) Limit key length in warning messages
Rename the XFS log structure to xlog to help crash distinquish it from the
other logs in Linux.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Revert commit 1307bbd, which uses the s_umount semaphore to provide
exclusion between xfs_sync_worker and unmount, in favor of shutting down
the sync worker before freeing the log in xfs_log_unmount. This is a
cleaner way of resolving the race between xfs_sync_worker and unmount
than using s_umount.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Commit de1cbee which removed b_file_offset in favor of b_bn introduced a bug
causing xfs_buf_allocate_memory() to overestimate the number of necessary
pages. The problem is that xfs_buf_alloc() sets b_bn to -1 and thus effectively
every buffer is straddling a page boundary which causes
xfs_buf_allocate_memory() to allocate two pages and use vmalloc() for access
which is unnecessary.
Dave says xfs_buf_alloc() doesn't need to set b_bn to -1 anymore since the
buffer is inserted into the cache only after being fully initialized now.
So just make xfs_buf_alloc() fill in proper block number from the beginning.
CC: David Chinner <dchinner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When we fail to find an matching extent near the requested extent
specification during a left-right distance search in
xfs_alloc_ag_vextent_near, we fail to free the original cursor that
we used to look up the XFS_BTNUM_CNT tree and hence leak it.
Reported-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
An inode in the AIL can be flush locked and marked stale if
a cluster free transaction occurs at the right time. The
inode item is then marked as flushing, which causes xfsaild
to spin and leaves the filesystem stalled. This is
reproduced by running xfstests 273 in a loop for an
extended period of time.
Check for stale inodes before the flush lock. This marks
the inode as pinned, leads to a log flush and allows the
filesystem to proceed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There is some concern that these iput()'s could be the final iputs and could
induce lockups on people waiting on writeback. This would happen in the
rare case that we don't create ordered extents because of an error, but it
is theoretically possible and we already have a mechanism to deal with this
so just make them delayed iputs to negate any worry.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When fixing up the locking in the delayed ref destruction work I accidently
broke the locking myself ;(. Add back a spin_lock that should be there and
we are now all set. Thanks,
Btrfs: add a missing spin_lock
When fixing up the locking in the delayed ref destruction work I accidently
broke the locking myself ;(. Add back a spin_lock that should be there and
we are now all set. Thanks,
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
add_all_parents did assume that path is already at a correct extent data
item, which may not be true in case of data extents that were partly
rewritten and splitted.
We need to check if we're on a matching extent for every item and only
for the ones after the first. The loop is changed to do this now.
This patch also fixes a bug introduced with commit 3b127fd8 "Btrfs:
remove obsolete btrfs_next_leaf call from __resolve_indirect_ref".
The removal of next_leaf did sometimes result in slot==nritems when
the above described case happens, and thus resulting in invalid values
(e.g. wanted_obejctid) in add_all_parents (leading to missed backrefs
or even crashes).
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We introduce btrfs_next_old_item that uses btrfs_next_old_leaf instead
of btrfs_next_leaf.
btrfs_next_item is also changed to simply call btrfs_next_old_item with
time_seq being 0.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We need to initialize this to false, because the is_rb callback only
ever sets it to true.
Noticed while reading through the code.
Cc: stable@vger.kernel.org
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull slave-dmaengine fixes from Vinod Koul:
"A few fixes in pl330 and imx-sdma drivers."
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
DMA: PL330: Fix racy mutex unlock
DMA: PL330: Add missing static storage class specifier
dma: imx-sdma: buf_tail should be initialize in prepare function
dmaengine: pl330: dont complete descriptor for cyclic dma
Pull two cgroup fixes from Tejun Heo:
"This containes two patches fixing a refcnt race bug during css_put().
Decrementing and checking the value weren't atomic and two tasks could
think that they both pushed the counter to zero."
* 'for-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroups: Account for CSS_DEACT_BIAS in __css_put
cgroup: make sure that decisions in __css_put are atomic
If the range passed to mbind() is not allocated on nodes set in the
nodemask, it migrates the pages to respect the constraint.
The final formal of migrate_pages() is a mode of type enum migrate_mode,
not a boolean. do_mbind() is currently passing "true" which is the
equivalent of MIGRATE_SYNC_LIGHT. This should instead be MIGRATE_SYNC
for synchronous page migration.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/media/video/pms.c uses kzalloc() and kfree() so it should
include <linux/slab.h> to fix build errors and a warning.
drivers/media/video/pms.c:1047:2: error: implicit declaration of function 'kzalloc'
drivers/media/video/pms.c:1047:6: warning: assignment makes pointer from integer without a cast
drivers/media/video/pms.c:1116:2: error: implicit declaration of function 'kfree'
Found in mmotm but applies to mainline.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are a number of small fixes for the drivers/staging tree, as well as iio
and pstore drivers (which came from the staging tree in the 3.5-rc1 merge).
All of these are tiny, but resolve issues that people have been reporting.
There's also a documentation update to reflect what the iio drivers really are
doing, which is good to get straightened out.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAk/iNeAACgkQMUfUDdst+ynNVwCdHCj6smC2JUbvN34gACNrpsYY
WggAoJzQn9mQhwq0pa/ZTpaUOvCFZ39L
=hDkC
-----END PGP SIGNATURE-----
Merge tag 'staging-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fixes from Greg Kroah-Hartman:
"Here are a number of small fixes for the drivers/staging tree, as well
as iio and pstore drivers (which came from the staging tree in the
3.5-rc1 merge). All of these are tiny, but resolve issues that people
have been reporting.
There's also a documentation update to reflect what the iio drivers
really are doing, which is good to get straightened out.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'staging-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8712u: Add new USB IDs
staging: gdm72xx: Release netlink socket properly
iio: drop wrong reference from Kconfig
pstore/inode: Make pstore_fill_super() static
pstore/ram: Should zap persistent zone on unlink
pstore/ram_core: Factor persistent_ram_zap() out of post_init()
pstore/ram_core: Do not reset restored zone's position and size
pstore/ram: Should update old dmesg buffer before reading
staging:iio:ad7298: Fix linker error due to missing IIO kfifo buffer
Revert "staging: usbip: bugfix for stack corruption on 64-bit architectures"
staging: usbip: bugfix for stack corruption on 64-bit architectures
staging/comedi: fix build for USB not enabled
staging: omapdrm: fix crash when freeing bad fb
staging:iio:ad7606: Re-add missing scale attribute
iio: Fix potential use after free
staging:iio: remove num_interrupt_lines from documentation
iio: documentation: Add out_altvoltage and friends
Here are some fixes for 3.5-rc4 that resolve the kmsg problems that
people have reported showing up after the printk and kmsg changes went
into 3.5-rc1. There are also a smattering of other tiny fixes for the
extcon and hyper-v drivers that people have reported.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAk/iNQcACgkQMUfUDdst+yklTQCfZCXFlhA43bZo/8Joqd2pLIIW
2uoAoMze0SlfJeN6Qu7yY0P+qV/f/pc3
=UNFY
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and printk fixes from Greg Kroah-Hartman:
"Here are some fixes for 3.5-rc4 that resolve the kmsg problems that
people have reported showing up after the printk and kmsg changes went
into 3.5-rc1. There are also a smattering of other tiny fixes for the
extcon and hyper-v drivers that people have reported.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
extcon: max8997: Add missing kfree for info->edev in max8997_muic_remove()
extcon: Set platform drvdata in gpio_extcon_probe() and fix irq leak
extcon: Fix wrong index in max8997_extcon_cable[]
kmsg - kmsg_dump() fix CONFIG_PRINTK=n compilation
printk: return -EINVAL if the message len is bigger than the buf size
printk: use mutex lock to stop syslog_seq from going wild
kmsg - kmsg_dump() use iterator to receive log buffer content
vme: change maintainer e-mail address
Extcon: Don't try to create duplicate link names
driver core: fixup reversed deferred probe order
printk: Fix alignment of buf causing crash on ARM EABI
Tools: hv: verify origin of netlink connector message
Here are some drivers/misc bugfixes (really just drivers/misc/mei/
fixes) for a few problems that have been reported.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAk/iNGgACgkQMUfUDdst+ymmPwCeLxWcEx3UE0pyhwssITArJZz3
WFIAmgPHM66lgXioLxR3swCib9FFo+Xp
=hIWT
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc tree updates from Greg Kroah-Hartman:
"Here are some drivers/misc bugfixes (really just drivers/misc/mei/
fixes) for a few problems that have been reported.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'char-misc-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: mei: set WDIOF_ALARMONLY on mei watchdog
misc: mei: Disable MSI when IRQ registration fails
misc: mei: fix stalled read
misc: mei: unregister misc device in pci_remove function
misc: mei: set IRQF_ONESHOT for msi request_threaded_irq
Here are 3 patches resolving a boot regression (the mop500 fix), a build
warning fix, and a kernel-doc fix. All tiny, but should go into the
final 3.5 release.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAk/iNosACgkQMUfUDdst+ykedgCeLhpFrq5dI19tbhEmCroFs4sx
f+4An29dz2bGkjeViDNkmaBC7msPzLNc
=EBge
-----END PGP SIGNATURE-----
Merge tag 'tty-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg Kroah-Hartman:
"Here are 3 patches resolving a boot regression (the mop500 fix), a
build warning fix, and a kernel-doc fix. All tiny, but should go into
the final 3.5 release.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'tty-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial/amba-pl011: move custom pin control to driver
serial: fix serial_txx9.c build warning/typo
serial: fix kernel-doc warnings in 8250.c
* emailed from Andrew Morton <akpm@linux-foundation.org>: (21 patches)
mm/memblock: fix overlapping allocation when doubling reserved array
c/r: prctl: Move PR_GET_TID_ADDRESS to a proper place
pidns: find_new_reaper() can no longer switch to init_pid_ns.child_reaper
pidns: guarantee that the pidns init will be the last pidns process reaped
fault-inject: avoid call to random32() if fault injection is disabled
Viresh has moved
get_maintainer: Fix --help warning
mm/memory.c: fix kernel-doc warnings
mm: fix kernel-doc warnings
mm: correctly synchronize rss-counters at exit/exec
mm, thp: print useful information when mmap_sem is unlocked in zap_pmd_range
h8300: use the declarations provided by <asm/sections.h>
h8300: fix use of extinct _sbss and _ebss
xtensa: use the declarations provided by <asm/sections.h>
xtensa: use "test -e" instead of bashism "test -a"
xtensa: replace xtensa-specific _f{data,text} by _s{data,text}
memcg: fix use_hierarchy css_is_ancestor oops regression
mm, oom: fix and cleanup oom score calculations
nilfs2: ensure proper cache clearing for gc-inodes
thp: avoid atomic64_read in pmd_read_atomic for 32bit PAE
...
__alloc_memory_core_early() asks memblock for a range of memory then try
to reserve it. If the reserved region array lacks space for the new
range, memblock_double_array() is called to allocate more space for the
array. If memblock is used to allocate memory for the new array it can
end up using a range that overlaps with the range originally allocated in
__alloc_memory_core_early(), leading to possible data corruption.
With this patch memblock_double_array() now calls memblock_find_in_range()
with a narrowed candidate range (in cases where the reserved.regions array
is being doubled) so any memory allocated will not overlap with the
original range that was being reserved. The range is narrowed by passing
in the starting address and size of the previously allocated range. Then
the range above the ending address is searched and if a candidate is not
found, the range below the starting address is searched.
Signed-off-by: Greg Pearson <greg.pearson@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During merging of PR_GET_TID_ADDRESS patch the code has been misplaced (it
happened to appear under PR_MCE_KILL) in result noone can use this option.
Fix it by moving code snippet to a proper place.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Walmsley