If Make gets a fatal signal while a shell is executing, it may delete
the target file that the recipe was supposed to update. This is needed
to make sure that it is remade from scratch when Make is next run; if
Make is interrupted after the recipe has begun to write the target file,
it results in an incomplete file whose time stamp is newer than that
of the prerequisites files. Make automatically deletes the incomplete
file on interrupt unless the target is marked .PRECIOUS.
The situation is just the same as when the shell fails for some reasons.
Usually when a recipe line fails, if it has changed the target file at
all, the file is corrupted, or at least it is not completely updated.
Yet the file’s time stamp says that it is now up to date, so the next
time Make runs, it will not try to update that file.
However, Make does not cater to delete the incomplete target file in
this case. We need to add .DELETE_ON_ERROR somewhere in the Makefile
to request it.
scripts/Kbuild.include seems a suitable place to add it because it is
included from almost all sub-makes.
Please note .DELETE_ON_ERROR is not effective for phony targets.
The external module building should never ever touch the kernel tree.
The following recipe fails if include/generated/autoconf.h is missing.
However, include/config/auto.conf is not deleted since it is a phony
target.
PHONY += include/config/auto.conf
include/config/auto.conf:
$(Q)test -e include/generated/autoconf.h -a -e $@ || ( \
echo >&2; \
echo >&2 " ERROR: Kernel configuration is invalid."; \
echo >&2 " include/generated/autoconf.h or $@ are missing.";\
echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo >&2 ; \
/bin/false)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, only syncconfig creates or updates include/config/auto.conf
and some other files. Other config targets create or update only the
.config file.
When you configure and build the kernel from a pristine source tree,
any config target is followed by syncconfig in the build stage since
include/config/auto.conf is missing.
We are moving compiler tests from Makefile to Kconfig. It means that
parsing Kconfig files will be more costly since Kconfig invokes the
compiler commands internally. Thus, we want to avoid invoking Kconfig
twice (one for *config to create the .config, and one for syncconfig
to synchronize the auto.conf). If auto.conf does not exist, we can
generate all configuration files in the first configuration stage,
which will save the syncconfig in the build stage.
Please note this should be done only when auto.conf is missing. If
*config blindly did this, time stamp files under include/config/ would
be unnecessarily touched, triggering unneeded rebuild of objects.
I assume a scenario like this:
1. You have a source tree that has already been built
with CONFIG_FOO disabled
2. Run "make menuconfig" to enable CONFIG_FOO
3. CONFIG_FOO turns out to be unnecessary.
Run "make menuconfig" again to disable CONFIG_FOO
4. Run "make"
In this case, include/config/foo.h should not be touched since there
is no change in CONFIG_FOO. The sync process should be delayed until
the user really attempts to build the kernel.
This commit has another motivation; I want to suppress the 'No such
file or directory' warning from the 'include' directive.
The top-level Makefile includes auto.conf with '-include' directive,
like this:
ifeq ($(dot-config),1)
-include include/config/auto.conf
endif
This looks strange because auto.conf is mandatory when dot-config is 1.
I guess only the reason of using '-include' is to suppress the warning
'include/config/auto.conf: No such file or directory' when building
from a clean tree. However, this has a side-effect; Make considers
the files included by '-include' are optional. Hence, Make continues
to build even if it fails to generate include/config/auto.conf. I will
change this in the next commit, but the warning message is annoying.
(At least, kbuild test robot reports it as a regression.)
With this commit, Kconfig will generate all configuration files together
with the .config and I guess it is a solution good enough to suppress
the warning.
Note:
GNU Make 4.2 or later does not display the warning from the 'include'
directive if include files are successfully generated. See GNU Make
commit 87a5f98d248f ("[SV 102] Don't show unnecessary include file
errors.") However, older GNU Make versions are still widely used.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
syncconfig updates the .config only when sym_change_count > 0, i.e.
any change in config symbols has been detected.
Not only symbols but also comments are contained in the .config file.
If only comments are updated, they are not fed back to the .config,
then the stale comments are left-over. Of course, this is just a
matter of comments, but why not fix it.
I see some scenarios where this happens.
Scenario A:
1. You have a source tree that has already been configured.
2. Linus increments the version number in the top-level Makefile
(i.e. he commits a new release)
3. You pull it, and run 'make'
4. syncconfig is invoked because the environment variable,
KERNELVERSION is updated, but the .config is not updated since
no config symbol is changed.
5. The .config file contains a kernel version in the top line:
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 4.18.0-rc2 Kernel Configuration
... which points to a previous version.
Scenario B:
1. You have a source tree that has already been configured.
2. You upgrade the compiler, but it still has the same version number.
This may happen if you regularly build the latest compiler from
the source code.
3. You run 'make'
4. syncconfig is invoked because the environment variable,
CC_VERSION_TEXT is updated, but the .config is not updated since
no config symbol is changed.
5. The .config file contains the version string of the compiler:
#
# Compiler: aarch64-linux-gcc (GCC) 9.0.0 20180628 (experimental)
#
... which carries the information of the old compiler.
If KCONFIG_NOSILENTUPDATE is set, syncconfig is not allowed to update
the .config file. Otherwise, it is fine to update it regardless of
sym_change_count.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
'make syncconfig' creates some files such as include/config/auto.conf,
include/generate/autoconf.h, etc. but the necessary directory creation
relies on scripts/kconfig/Makefile.
To make Kconfig self-contained, create directories as needed in
conf_write_autoconf().
This change allows scripts/kconfig/Makefile cleanups; syncconfig can
be merged into simple-targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 17263baf95 ("kconfig: Create include/generated for
localmodconfig") added the 'mkdir' line because local{yes,mod}config
ran streamline_config.pl followed by silentoldconfig at that time.
Since commit 81d2bc2273 ("kconfig: invoke oldconfig instead of
silentoldconfig from local*config"), no sub-directory is required.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Split out helpers:
is_present() - check if the given path exists
is_dir() - check if the given path exists and it is a directory
make_parent_dir() - create the parent directories of the given path
These helpers will be reused in later commits.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
file_write_dep() is called only from conf_write_autoconf().
Move it from util.c to confdata.c to make it static.
Also, rename it to conf_write_dep() since it should belong to
the group of conf_write* functions.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As you see in mconf.c and nconf.c, conf_message_callback() hooks are
likely to end up with the boilerplate of vsnprintf(). Process the
string format before calling conf_message_callback() so that it
receives a simple string.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Dirk Gouders <dirk@gouders.net>
Drop useless redefinitions of cgraph_create_edge* macros. Drop the unused
nest argument. Also support gcc-8, which doesn't have freq argument.
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
The layout of Makefile.gcc-plugins had uneven tabs, and the long names
of things made this file a bit hard to quickly visually parse. This
breaks lines and moves options to the same tab depth. While we're at
it, this also adds some comments about the various sections.
Signed-off-by: Kees Cook <keescook@chromium.org>
Fix a warning whinge from Perl introduced by "scripts: kernel-doc: parse next structs/unions"
Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.32), passed through in regex; marked by <-- HERE in m/({ <-- HERE [^\{\}]*})/ at ./scripts/kernel-doc line 1155.
Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.32), passed through in regex; marked by <-- HERE in m/({ <-- HERE )/ at ./scripts/kernel-doc line 1179.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Not all toolchains have the baremetal elf targets, RedHat/Fedora ones
in particular. So, probe for whether it's available and use the previous
(linux) targets if it isn't.
Reported-by: Laura Abbott <labbott@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pull networking fixes from David Miller:
"Lots of fixes, here goes:
1) NULL deref in qtnfmac, from Gustavo A. R. Silva.
2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih.
3) Lost completion messages in AF_XDP, from Magnus Karlsson.
4) Correct bogus self-assignment in rhashtable, from Rishabh
Bhatnagar.
5) Fix regression in ipv6 route append handling, from David Ahern.
6) Fix masking in __set_phy_supported(), from Heiner Kallweit.
7) Missing module owner set in x_tables icmp, from Florian Westphal.
8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire.
9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy.
10) Fix NULL deref when using chains in act_csum, from Davide Caratti.
11) XDP_REDIRECT needs to check if the interface is up and whether the
MTU is sufficient. From Toshiaki Makita.
12) Net diag can do a double free when killing TCP_NEW_SYN_RECV
connections, from Lorenzo Colitti.
13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a
full minute, delaying device unregister. From Eric Dumazet.
14) Update MAC entries in the correct order in ixgbe, from Alexander
Duyck.
15) Don't leave partial mangles bpf program in jit_subprogs, from
Daniel Borkmann.
16) Fix pfmemalloc SKB state propagation, from Stefano Brivio.
17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng.
18) Use after free in tun XDP_TX, from Toshiaki Makita.
19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole.
20) Don't reuse remainder of RX page when XDP is set in mlx4, from
Saeed Mahameed.
21) Fix window probe handling of TCP rapair sockets, from Stefan
Baranoff.
22) Missing socket locking in smc_ioctl(), from Ursula Braun.
23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann.
24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva.
25) Two spots in ipv6 do a rol32() on a hash value but ignore the
result. Fixes from Colin Ian King"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits)
tcp: identify cryptic messages as TCP seq # bugs
ptp: fix missing break in switch
hv_netvsc: Fix napi reschedule while receive completion is busy
MAINTAINERS: Drop inactive Vitaly Bordug's email
net: cavium: Add fine-granular dependencies on PCI
net: qca_spi: Fix log level if probe fails
net: qca_spi: Make sure the QCA7000 reset is triggered
net: qca_spi: Avoid packet drop during initial sync
ipv6: fix useless rol32 call on hash
ipv6: sr: fix useless rol32 call on hash
net: sched: Using NULL instead of plain integer
net: usb: asix: replace mii_nway_restart in resume path
net: cxgb3_main: fix potential Spectre v1
lib/rhashtable: consider param->min_size when setting initial table size
net/smc: reset recv timeout after clc handshake
net/smc: add error handling for get_user()
net/smc: optimize consumer cursor updates
net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.
ipv6: ila: select CONFIG_DST_CACHE
net: usb: rtl8150: demote allmulti message to dev_dbg()
...
Make 'make tar-pkg' work on arm64.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
ARCH=vax isn't in mainline; it can be added back if/when it shows up.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Put $(LDFLAGS_$(@F)) into ld_flags so that $(LDFLAGS_pcap.o) and
$(LDFLAGS_vde.o) in arch/um/drivers/Makefile are absorbed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
$(LDFLAGS) $(ldflags-y) is equivalent to $(ld_flags).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Over time, the use of the flag SYMBOL_AUTO changed from initially
marking three automatically generated symbols ARCH, KERNELRELEASE and
UNAME_RELEASE to today's effect of protecting symbols from being
written out.
Currently, only symbols of type CHOICE and those with option
defconf_list set have that flag set.
Reflect that change in semantics in the flag's name.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Each of 'make {menu,n,g,x}config' uses (needs) pkg-config to make sure
that other required files are present and to determine build flags
settings, but none of these check that pkg-config itself is present.
Add a check for all 4 of these targets and update
Documentation/process/changes.rst to mention 'pkg-config'.
Fixes kernel bugzilla #77511:
https://bugzilla.kernel.org/show_bug.cgi?id=77511
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS
to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line CXXFLAGS, re-name HOSTCXXFLAGS
to KBUILD_HOSTCXXFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In Fedora, the debug information is packaged separately (foo-debuginfo) and
can be installed separately. There's been a long standing issue where only
one version of a debuginfo info package can be installed at a time. There's
been an effort for Fedora for parallel debuginfo to rectify this problem.
Part of the requirement to allow parallel debuginfo to work is that build ids
are unique between builds. The existing upstream rpm implementation ensures
this by re-calculating the build-id using the version and release as a
seed. This doesn't work 100% for the kernel because of the vDSO which is
its own binary and doesn't get updated when embedded.
Fix this by adding some data in an ELF note for both the kernel and modules.
The data is controlled via a Kconfig option so distributions can set it
to an appropriate value to ensure uniqueness between builds.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Verify that 'depmod' ($DEPMOD) is installed.
This is a partial revert of commit 620c231c7a
("kbuild: do not check for ancient modutils tools").
Also update Documentation/process/changes.rst to refer to
kmod instead of module-init-tools.
Fixes kernel bugzilla #198965:
https://bugzilla.kernel.org/show_bug.cgi?id=198965
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Chih-Wei Huang <cwhuang@linux.org.tw>
Cc: stable@vger.kernel.org # any kernel since 2012
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 8370edea81 ("bin2c: move bin2c in scripts/basic") moved bin2c
to the scripts/basic/ directory, incorrectly stating "Kexec wants to
use bin2c and it wants to use it really early in the build process.
See arch/x86/purgatory/ code in later patches."
Commit bdab125c93 ("Revert "kexec/purgatory: Add clean-up for
purgatory directory"") and commit d6605b6bbe ("x86/build: Remove
unnecessary preparation for purgatory") removed the redundant
purgatory build magic entirely.
That means that the move of bin2c was unnecessary in the first place.
fixdep is the only host program that deserves to sit in the
scripts/basic/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
atomic_as_refcounter.cocci script allows detecting
cases when refcount_t type and API should be used
instead of atomic_t.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Constantine Shulyupin <const@MakeLinux.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Multiline statements with invalid %p<foo> uses produce multiple
warnings. Fix that.
e.g.:
$ cat t_block.c
void foo(void)
{
MY_DEBUG(drv->foo,
"%pk",
foo->boo);
}
$ ./scripts/checkpatch.pl -f t_block.c
WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
#1: FILE: t_block.c:1:
+void foo(void)
WARNING: Invalid vsprintf pointer extension '%pk'
#3: FILE: t_block.c:3:
+ MY_DEBUG(drv->foo,
+ "%pk",
+ foo->boo);
WARNING: Invalid vsprintf pointer extension '%pk'
#3: FILE: t_block.c:3:
+ MY_DEBUG(drv->foo,
+ "%pk",
+ foo->boo);
total: 0 errors, 3 warnings, 6 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
t_block.c has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Link: http://lkml.kernel.org/r/9e8341bbe4c9877d159cb512bb701043cbfbb10b.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Tobin C. Harding" <me@tobin.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- update Kbuild and Kconfig documents
- sanitize -I compiler option handling
- update extract-vmlinux script to recognize LZ4 and ZSTD
- fix tools Makefiles
- update tags.sh to handle __ro_after_init
- suppress warnings in case getconf does not recognize LFS_* parameters
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbSK5LAAoJED2LAQed4NsGOJQP/3bwaUKcOgWyBeYD1l/lcu5q
spysRnxR7e+7Lp/HQV0v2XzOM9G0DWBA+j/dYUp8RcPsWOrXJkM8QkNk584YfxBY
ve0q/6QlUGmjgiizdT86xYpKhCfdF2uSnx7QvM9qXyt+WlyVzmeK1QatwDmcMuPF
ZLgi7P8XQ4uaUTIYss79SpDAMOCyCOHa2bapiiqJ2azR32L1AiwRF36u1bCVKMIC
gfcPRN2XjOkJfp/l5JYzJbr28uE80n9d0b9ua+vO8aKs4RGBiLwM2ci+43EPH19i
yNrgfBkjOO3HVCpS60STHARktNx+osSfMjTFP3xg+5vyIDwbqJl0+hgNEXRRUsCq
nSA7uvRwppnvPLWuI3/iaE0BvN1rBqVssateylsuOIfrcgFb71WAHCGWX+9t1QT5
4V3kkH+QgqEEFQg7BUrXI9ccTpT28vDBKjRD4O8O/SLtWo0GprXvuje6ZxZpa/ob
8V2MVcdPuLamZkSCy2I6pIIfNZ0wifI6/WX1HQ0A0VzOw5dJWH4qO/DMy7l8vw3m
fP84E79011PZ8BByrEE1EZ0cWeMGInoyC3Q5BmB0b4R2uxSC2vEhCct4MJpOxVYQ
gUBgiti33mkvHmpZKGTgt89+71X3u26HYOjgTO2vnffSYpKGdYkDAhMyxxw9EqqJ
AcBKpL1fxz2Ik7DgW75J
=aXcg
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- update Kbuild and Kconfig documents
- sanitize -I compiler option handling
- update extract-vmlinux script to recognize LZ4 and ZSTD
- fix tools Makefiles
- update tags.sh to handle __ro_after_init
- suppress warnings in case getconf does not recognize LFS_* parameters
* tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: suppress warnings from 'getconf LFS_*'
scripts/tags.sh: add __ro_after_init
tools: build: Use HOSTLDFLAGS with fixdep
tools: build: Fixup host c flags
tools build: fix # escaping in .cmd files for future Make
scripts: teach extract-vmlinux about LZ4 and ZSTD
kbuild: remove duplicated comments about PHONY
kbuild: .PHONY is not a variable, but PHONY is
kbuild: do not drop -I without parameter
kbuild: document the KBUILD_KCONFIG env. variable
kconfig: update user kconfig tools doc.
kbuild: delete INSTALL_FW_PATH from kbuild documentation
kbuild: update ARCH alias info for sparc
kbuild: update ARCH alias info for sh
Note that the LZ4 signature is different than that of modern LZ4 as we
use the "legacy" format which suffers from some downsides like inability
to disable compression.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Checking whether output of commands matches the ver_linux pattern in
the version function is original shell implementation legacy code. When
the original implementation failed to locate a particular utility,
it generated error output along the lines of:
ver_linux:line number: command not found.
The awk implementation, does not contain the name of the script within the
body of the error message returned by the subshell when a given utility
fails to be located. The error message returned is along the lines of:
sh: name of utility: command not found
Safeguarding against the ver_linux pattern being found in the output
being parsed may thus be safely omitted.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, input coming from /proc/self/maps is split into fields without
checking whether or not it matches libc.so. This is not efficient.
All text processing should only be performed on lines of input that
match libc.so.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comment is the same as in the top-level Makefile.
Also, the comments contain typos:
- the .PHONY variable -> the PHONY variable
- se we can ... -> so we can ...
Instead of fixing the typos, just remove the duplicated comments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The comment line for addtree says "skip if -I has no parameter".
What it actually does is "drop if -I has no parameter". For example,
if you have the compiler flag '-I foo' (a space between), it will be
converted to 'foo'. This completely changes the meaning.
What we want is, "do nothing" for -I without parameter so that
'-I foo' is kept as-is.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
GCC_PLUGIN_SUBDIR has never been used. If you really need this in
the future, please re-add it then.
For now, the code is unused. Remove.
'export HOSTLIBS' is not necessary either.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull networking fixes from David Miller:
1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.
2) Need to bump memory lock rlimit for test_sockmap bpf test, from
Yonghong Song.
3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.
4) Fix uninitialized read in nf_log, from Jann Horn.
5) Fix raw command length parsing in mlx5, from Alex Vesker.
6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
Varadhan.
7) Fix regressions in FIB rule matching during create, from Jason A.
Donenfeld and Roopa Prabhu.
8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.
9) More bpfilter build fixes/adjustments from Masahiro Yamada.
10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
Dangaard Brouer.
11) fib_tests.sh file permissions were broken, from Shuah Khan.
12) Make sure BH/preemption is disabled in data path of mac80211, from
Denis Kenzior.
13) Don't ignore nla_parse_nested() return values in nl80211, from
Johannes berg.
14) Properly account sock objects ot kmemcg, from Shakeel Butt.
15) Adjustments to setting bpf program permissions to read-only, from
Daniel Borkmann.
16) TCP Fast Open key endianness was broken, it always took on the host
endiannness. Whoops. Explicitly make it little endian. From Yuching
Cheng.
17) Fix prefix route setting for link local addresses in ipv6, from
David Ahern.
18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.
19) Various bpf sockmap fixes, from John Fastabend.
20) Use after free for GRO with ESP, from Sabrina Dubroca.
21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
Eric Biggers.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
qede: Adverstise software timestamp caps when PHC is not available.
qed: Fix use of incorrect size in memcpy call.
qed: Fix setting of incorrect eswitch mode.
qed: Limit msix vectors in kdump kernel to the minimum required count.
ipvlan: call dev_change_flags when ipvlan mode is reset
ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
net: fix use-after-free in GRO with ESP
tcp: prevent bogus FRTO undos with non-SACK flows
bpf: sockhash, add release routine
bpf: sockhash fix omitted bucket lock in sock_close
bpf: sockmap, fix smap_list_map_remove when psock is in many maps
bpf: sockmap, fix crash when ipv6 sock is added
net: fib_rules: bring back rule_exists to match rule during add
hv_netvsc: split sub-channel setup into async and sync
net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
atm: zatm: Fix potential Spectre v1
s390/qeth: consistently re-enable device features
s390/qeth: don't clobber buffer on async TX completion
s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
s390/qeth: fix race when setting MAC address
...
When Documentation/scheduler/sched-pelt.c is compiled, it generates
a file called Documentation/scheduler/sched-pelt. As this only
exists after building such tool, we need an explict check
to remove the false-positive.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Introducing a simple bus for the alternate modes. Bus allows
binding drivers to the discovered alternate modes the
partners support.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
64-bit ELF v2 ABI specification for POWER describes, on section "General
Stack Frame Requirements", that the stack should use the following
instructions when compiled with backchain:
mflr r0
std r0, 16(r1)
stdu r1, -XX(r1)
Where XX is the frame size for that function, and this is the value
checkstack.pl will find the stack size for each function.
This patch also simplifies the entire Powerpc section, since just two
type of instructions are used, 'stdu' for 64 bits and 'stwu' for 32 bits
platform.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- introduce __diag_* macros and suppress -Wattribute-alias warnings from GCC 8
- fix stack protector test script for x86_64
- fix line number handling in Kconfig
- document that '#' starts a comment in Kconfig
- handle P_SYMBOL property in dump debugging of Kconfig
- correct help message of LD_DEAD_CODE_DATA_ELIMINATION
- fix occasional segmentation faults in Kconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oABr
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- introduce __diag_* macros and suppress -Wattribute-alias warnings
from GCC 8
- fix stack protector test script for x86_64
- fix line number handling in Kconfig
- document that '#' starts a comment in Kconfig
- handle P_SYMBOL property in dump debugging of Kconfig
- correct help message of LD_DEAD_CODE_DATA_ELIMINATION
- fix occasional segmentation faults in Kconfig
* tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: loop boundary condition fix
kbuild: reword help of LD_DEAD_CODE_DATA_ELIMINATION
kconfig: handle P_SYMBOL in print_symbol()
kconfig: document Kconfig source file comments
kconfig: fix line numbers for if-entries in menu tree
stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=y
powerpc: Remove -Wattribute-alias pragmas
disable -Wattribute-alias warning for SYSCALL_DEFINEx()
kbuild: add macro for controlling warnings to linux/compiler.h
If buf[-1] just happens to hold the byte 0x0A, then nread can wrap around
to (size_t)-1, leading to invalid memory accesses.
This has caused segmentation faults when trying to build the latest
kernel snapshots for i686 in Fedora:
https://bugzilla.redhat.com/show_bug.cgi?id=1592374
Signed-off-by: Jerry James <loganjerry@gmail.com>
[alexpl@fedoraproject.org: reformatted patch for submission]
Signed-off-by: Alexander Ploumistos <alexpl@fedoraproject.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Each symbol has a property of type P_SYMBOL since commit
59e89e3ddf (kconfig: save location of config symbols).
Handle those properties in print_symbol().
Further, place a pointer to print_symbol() in the comment above the
list of known property type.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With the brand-new syntax extension of Kconfig, we can directly
check the compiler capability in the configuration phase.
If the cc-can-link.sh fails, the BPFILTER_UMH is automatically
hidden by the dependency.
I also deleted 'default n', which is no-op.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It may not be the actual real stable mailing list address, but the
stable scripts to actually pick up on the traditional way to mark stable
patches.
There are also reasons to explicitly avoid using the actual mailing list
address, since security patches with embargo dates generally do want the
stable marking, but don't want tools etc to mistakenly send the patch
out to the mailing list early.
So don't warn for things that are still actively used and explicitly
supported.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The line numers for if-entries in the menu tree are off by one or more
lines which is confusing when debugging for correctness of unrelated changes.
According to the git log, commit a02f0570ae (kconfig: improve
error handling in the parser) was the last one that changed that part
of the parser and replaced
"if_entry: T_IF expr T_EOL"
by
"if_entry: T_IF expr nl"
but the commit message does not state why this has been done.
When reverting that part of the commit, only the line numers are
corrected (checked with cdebug = DEBUG_PARSE in zconf.y), otherwise
the menu tree remains unchanged (checked with zconfdump() enabled in
conf.c).
An example for the corrected line numbers:
drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig
drivers/soc/tegra/Kconfig:4:if
drivers/soc/tegra/Kconfig:6:if
changes to:
drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig
drivers/soc/tegra/Kconfig:1:if
drivers/soc/tegra/Kconfig:4:if
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When building a 64-bit 4.18-rc1 kernel with a 32-bit userland, I
noticed that stack protection was silently disabled. Adding -m64 in
gcc-x86_64-has-stack-protector.sh fixed that, similar to what has been
noticed in commit 2a61f4747e ("stack-protector: test compiler
capability in Kconfig and drop AUTO mode") for
gcc-x86_32-has-stack-protector.sh.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Non gcc-5 builds with CONFIG_STACK_VALIDATION=y and
SKIP_STACK_VALIDATION=1 fail.
Example output:
/bin/sh: init/.tmp_main.o: Permission denied
commit 96f60dfa58 ("trace: Use -mcount-record for dynamic ftrace"),
added a mismatched endif. This causes cmd_objtool to get mistakenly
set.
Relocate endif to balance the newly added -record-mcount check.
Link: http://lkml.kernel.org/r/20180608214746.136554-1-gthelen@google.com
Fixes: 96f60dfa58 ("trace: Use -mcount-record for dynamic ftrace")
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Some files, like tools/memory-model/README has references to
a Documentation file that is locale to it. Handle references
that are relative to them too.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Now that the number of broken refs are smaller, improve the logic
that gets rid of false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Sometimes, people use dash instead of underline or vice-versa.
Try to autocorrect it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
There are several links broken due to DT file movements. Add
a hint logic to seek for those changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
at MAINTAINERS, some filename paths use '?' and things like [7,9].
So, accept more wildcards, in order to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
The name of the --fix option was renamed, but it was not
changed at the quick help message.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
- fix some bugs introduced by the recent Kconfig syntax extension
- add some symbols about compiler information in Kconfig, such as
CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
- test compiler capability for the stack protector in Kconfig, and
clean-up Makefile
- test compiler capability for GCC-plugins in Kconfig, and clean-up
Makefile
- allow to enable GCC-plugins for COMPILE_TEST
- test compiler capability for KCOV in Kconfig and correct dependency
- remove auto-detect mode of the GCOV format, which is now more nicely
handled in Kconfig
- test compiler capability for mprofile-kernel on PowerPC, and
clean-up Makefile
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VABv
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix some bugs introduced by the recent Kconfig syntax extension
- add some symbols about compiler information in Kconfig, such as
CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
- test compiler capability for the stack protector in Kconfig, and
clean-up Makefile
- test compiler capability for GCC-plugins in Kconfig, and clean-up
Makefile
- allow to enable GCC-plugins for COMPILE_TEST
- test compiler capability for KCOV in Kconfig and correct dependency
- remove auto-detect mode of the GCOV format, which is now more nicely
handled in Kconfig
- test compiler capability for mprofile-kernel on PowerPC, and clean-up
Makefile
- misc cleanups
* tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
linux/linkage.h: replace VMLINUX_SYMBOL_STR() with __stringify()
kconfig: fix localmodconfig
sh: remove no-op macro VMLINUX_SYMBOL()
powerpc/kbuild: move -mprofile-kernel check to Kconfig
Documentation: kconfig: add recommended way to describe compiler support
gcc-plugins: disable GCC_PLUGIN_STRUCTLEAK_BYREF_ALL for COMPILE_TEST
gcc-plugins: allow to enable GCC_PLUGINS for COMPILE_TEST
gcc-plugins: test plugin support in Kconfig and clean up Makefile
gcc-plugins: move GCC version check for PowerPC to Kconfig
kcov: test compiler capability in Kconfig and correct dependency
gcov: remove CONFIG_GCOV_FORMAT_AUTODETECT
arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
kconfig: add CC_IS_CLANG and CLANG_VERSION
kconfig: add CC_IS_GCC and GCC_VERSION
stack-protector: test compiler capability in Kconfig and drop AUTO mode
kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILE
When kconfig syntax moved to use $(FOO) for environment variables
localmodconfig was not updated.
Fix so it now works with the new syntax $(FOO)
Fixes: 104daea149 ("kconfig: reference environment variables directly and remove 'option env='")
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Run scripts/gcc-plugin.sh from Kconfig so that users can enable
GCC_PLUGINS only when the compiler supports building plugins.
Kconfig defines a new symbol, PLUGIN_HOSTCC. This will contain
the compiler (g++ or gcc) used for building plugins, or empty
if the plugin can not be supported at all.
This allows us to remove all ugly testing in Makefile.gcc-plugins.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
For PowerPC, GCC 5.2 is the requirement for GCC plugins. Move the
version check to Kconfig so that the GCC plugin menus will be hidden
if an older compiler is in use.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
As Documentation/kbuild/kconfig-language.txt notes, 'select' should be
be used with care - it forces a lower limit of another symbol, ignoring
the dependency. Currently, KCOV can select GCC_PLUGINS even if arch
does not select HAVE_GCC_PLUGINS. This could cause the unmet direct
dependency.
Now that Kconfig can test compiler capability, let's handle this in a
more sophisticated way.
There are two ways to enable KCOV; use the compiler that natively
supports -fsanitize-coverage=trace-pc, or build the SANCOV plugin if
the compiler has ability to build GCC plugins. Hence, the correct
dependency for KCOV is:
depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS
You do not need to build the SANCOV plugin if the compiler already
supports -fsanitize-coverage=trace-pc. Hence, the select should be:
select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC
With this, GCC_PLUGIN_SANCOV is selected only when necessary, so
scripts/Makefile.gcc-plugins can be cleaner.
I also cleaned up Kconfig and scripts/Makefile.kcov as well.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Here is the big staging and IIO driver update for 4.18-rc1.
It was delayed as I wanted to make sure the final driver deletions did
not cause any major merge issues, and all now looks good.
There are a lot of patches here, just over 1000. The diffstat summary
shows the major changes here:
1007 files changed, 16828 insertions(+), 227770 deletions(-)
Because of this, we might be close to shrinking the overall kernel
source code size for two releases in a row.
There was loads of work in this release cycle, primarily:
- tons of ks7010 driver cleanups
- lots of mt7621 driver fixes and cleanups
- most driver cleanups
- wilc1000 fixes and cleanups
- lots and lots of IIO driver cleanups and new additions
- debugfs cleanups for all staging drivers
- lots of other staging driver cleanups and fixes, the shortlog
has the full details.
but the big user-visable things here are the removal of 3 chunks of
code:
- ncpfs and ipx were removed on schedule, no one has cared about
this code since it moved to staging last year, and if it needs
to come back, it can be reverted.
- lustre file system is removed. I've ranted at the lustre
developers about once a year for the past 5 years, with no
real forward progress at all to clean things up and get the
code into the "real" part of the kernel. Given that the
lustre developers continue to work on an external tree and try
to port those changes to the in-kernel tree every once in a
while, this whole thing really really is not working out at
all. So I'm deleting it so that the developers can spend the
time working in their out-of-tree location and get things
cleaned up properly to get merged into the tree correctly at a
later date.
Because of these file removals, you will have merge issues on some of
these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the
atomisp driver). Just delete those files, it's a simple merge :)
All of this has been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxvjGQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoEwCbBYnyUl3cwCszIJ3L3/zvUWpmqIgAn1DDsAim
dM4lmKg6HX/JBSV4GAN0
=zdta
-----END PGP SIGNATURE-----
Merge tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH:
"Here is the big staging and IIO driver update for 4.18-rc1.
It was delayed as I wanted to make sure the final driver deletions did
not cause any major merge issues, and all now looks good.
There are a lot of patches here, just over 1000. The diffstat summary
shows the major changes here:
1007 files changed, 16828 insertions(+), 227770 deletions(-)
Because of this, we might be close to shrinking the overall kernel
source code size for two releases in a row.
There was loads of work in this release cycle, primarily:
- tons of ks7010 driver cleanups
- lots of mt7621 driver fixes and cleanups
- most driver cleanups
- wilc1000 fixes and cleanups
- lots and lots of IIO driver cleanups and new additions
- debugfs cleanups for all staging drivers
- lots of other staging driver cleanups and fixes, the shortlog has
the full details.
but the big user-visable things here are the removal of 3 chunks of
code:
- ncpfs and ipx were removed on schedule, no one has cared about this
code since it moved to staging last year, and if it needs to come
back, it can be reverted.
- lustre file system is removed.
I've ranted at the lustre developers about once a year for the past
5 years, with no real forward progress at all to clean things up
and get the code into the "real" part of the kernel.
Given that the lustre developers continue to work on an external
tree and try to port those changes to the in-kernel tree every once
in a while, this whole thing really really is not working out at
all. So I'm deleting it so that the developers can spend the time
working in their out-of-tree location and get things cleaned up
properly to get merged into the tree correctly at a later date.
Because of these file removals, you will have merge issues on some of
these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the
atomisp driver). Just delete those files, it's a simple merge :)
All of this has been in linux-next for a while with no reported
problems"
* tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1011 commits)
staging: ipx: delete it from the tree
ncpfs: remove uapi .h files
ncpfs: remove Documentation
ncpfs: remove compat functionality
staging: ncpfs: delete it
staging: lustre: delete the filesystem from the tree.
staging: vc04_services: no need to save the log debufs dentries
staging: vc04_services: vchiq_debugfs_log_entry can be a void *
staging: vc04_services: remove struct vchiq_debugfs_info
staging: vc04_services: move client dbg directory into static variable
staging: vc04_services: remove odd vchiq_debugfs_top() wrapper
staging: vc04_services: no need to check debugfs return values
staging: mt7621-gpio: reorder includes alphabetically
staging: mt7621-gpio: change gc_map to don't use pointers
staging: mt7621-gpio: use GPIOF_DIR_OUT and GPIOF_DIR_IN macros instead of custom values
staging: mt7621-gpio: change 'to_mediatek_gpio' to make just a one line return
staging: mt7621-gpio: dt-bindings: update documentation for #interrupt-cells property
staging: mt7621-gpio: update #interrupt-cells for the gpio node
staging: mt7621-gpio: dt-bindings: complete documentation for the gpio
staging: mt7621-dts: add missing properties to gpio node
...
This will be useful to describe the clang version dependency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Move the test for -fstack-protector(-strong) option to Kconfig.
If the compiler does not support the option, the corresponding menu
is automatically hidden. If STRONG is not supported, it will fall
back to REGULAR. If REGULAR is not supported, it will be disabled.
This means, AUTO is implicitly handled by the dependency solver of
Kconfig, hence removed.
I also turned the 'choice' into only two boolean symbols. The use of
'choice' is not a good idea here, because all of all{yes,mod,no}config
would choose the first visible value, while we want allnoconfig to
disable as many features as possible.
X86 has additional shell scripts in case the compiler supports those
options, but generates broken code. I added CC_HAS_SANE_STACKPROTECTOR
to test this. I had to add -m32 to gcc-x86_32-has-stack-protector.sh
to make it work correctly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- v9fs updates
- MM
- procfs updates
- lib/ updates
- autofs updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
autofs: small cleanup in autofs_getpath()
autofs: clean up includes
autofs: comment on selinux changes needed for module autoload
autofs: update MAINTAINERS entry for autofs
autofs: use autofs instead of autofs4 in documentation
autofs: rename autofs documentation files
autofs: create autofs Kconfig and Makefile
autofs: delete fs/autofs4 source files
autofs: update fs/autofs4/Makefile
autofs: update fs/autofs4/Kconfig
autofs: copy autofs4 to autofs
autofs4: use autofs instead of autofs4 everywhere
autofs4: merge auto_fs.h and auto_fs4.h
fs/binfmt_misc.c: do not allow offset overflow
checkpatch: improve patch recognition
lib/ucs2_string.c: add MODULE_LICENSE()
lib/mpi: headers cleanup
lib/percpu_ida.c: use _irqsave() instead of local_irq_save() + spin_lock
lib/idr.c: remove simple_ida_lock
lib/bitmap.c: micro-optimization for __bitmap_complement()
...
There are mode change and rename only patches that are unrecognized
by the get_maintainer.pl script.
Recognize them.
Link: http://lkml.kernel.org/r/bf63101a908d0ff51948164aa60e672368066186.1526949367.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're already using a union of many fields here, so stop abusing the
_mapcount and make page_type its own field. That implies renaming some of
the machinery that creates PageBuddy, PageBalloon and PageKmemcg; bring
back the PG_buddy, PG_balloon and PG_kmemcg names.
As suggested by Kirill, make page_type a bitmask. Because it starts out
life as -1 (thanks to sharing the storage with _mapcount), setting a page
flag means clearing the appropriate bit. This gives us space for probably
twenty or so extra bits (depending how paranoid we want to be about
_mapcount underflow).
Link: http://lkml.kernel.org/r/20180518194519.3820-3-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the appropriate SPDX tag to these scripts.
Miscellanea:
o Add my copyright to checkpatch
Link: http://lkml.kernel.org/r/d08e49e8f6562c58a63792aa64306d1851f81f4b.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Sync dtc with upstream version v1.4.6-21-g84e414b0b5bc. This adds new
warnings which are either fixed or disabled by default (enabled with
W=1).
- Validate an untrusted offset in DT overlay function
update_usages_of_a_phandle_reference
- Fix a use after free error of_platform_device_destroy
- Fix an off by 1 string errors in unittest
- Avoid creating a struct device for OPP nodes
- Update DT specific submitting-patches.txt with patch content and
subject requirements.
- Move some bindings to their proper subsystem locations
- Add vendor prefixes for Kaohsiung, SiFive, Avnet, Wi2Wi, Logic PD, and
ArcherMind
- Add documentation for "no-gpio-delays" property in FSI bus GPIO master
- Add compatible for r8a77990 SoC ravb ethernet block
- More wack-a-mole removal of 'status' property in examples
-----BEGIN PGP SIGNATURE-----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=2b7G
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- Sync dtc with upstream version v1.4.6-21-g84e414b0b5bc. This adds new
warnings which are either fixed or disabled by default (enabled with
W=1).
- Validate an untrusted offset in DT overlay function
update_usages_of_a_phandle_reference
- Fix a use after free error of_platform_device_destroy
- Fix an off by 1 string errors in unittest
- Avoid creating a struct device for OPP nodes
- Update DT specific submitting-patches.txt with patch content and
subject requirements.
- Move some bindings to their proper subsystem locations
- Add vendor prefixes for Kaohsiung, SiFive, Avnet, Wi2Wi, Logic PD,
and ArcherMind
- Add documentation for "no-gpio-delays" property in FSI bus GPIO
master
- Add compatible for r8a77990 SoC ravb ethernet block
- More wack-a-mole removal of 'status' property in examples
* tag 'devicetree-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
dt-bindings: submitting-patches: add guidance on patch content and subject
of: platform: stop accessing invalid dev in of_platform_device_destroy
dt-bindings: net: ravb: Add support for r8a77990 SoC
dt-bindings: Add vendor prefix for ArcherMind
dt-bindings: fsi-master-gpio: Document "no-gpio-delays" property
dt-bindings: Add vendor prefix for Logic PD
of: overlay: validate offset from property fixups
of: unittest: for strings, account for trailing \0 in property length field
drm: rcar-du: disable dtc graph-endpoint warnings on DT overlays
kbuild: disable new dtc graph and unit-address warnings
scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc
MAINTAINERS: add keyword for devicetree overlay notifiers
dt-bindings: define vendor prefix for Wi2Wi, Inc.
dt-bindings: Add vendor prefix for Avnet, Inc.
dt-bindings: Relocate Tegra20 memory controller bindings
dt-bindings: Add "sifive" vendor prefix
dt-bindings: exynos: move ADC binding to iio/adc/ directory
dt-bindings: powerpc/4xx: move 4xx NDFC and EMAC bindings to subsystem directories
dt-bindings: move various RNG bindings to rng/ directory
dt-bindings: move various timer bindings to timer/ directory
...
Notable changes:
- Support for split PMD page table lock on 64-bit Book3S (Power8/9).
- Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live
patching again.
- Add support for patching barrier_nospec in copy_from_user() and syscall entry.
- A couple of fixes for our data breakpoints on Book3S.
- A series from Nick optimising TLB/mm handling with the Radix MMU.
- Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre.
- Several series optimising various parts of the 32-bit code from Christophe Leroy.
- Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"),
which is why the diffstat has so many deletions.
And many other small improvements & fixes.
There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and
a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and
fs/proc/task_mmu.c, which cleans up some details around pkey support. It was
ack'ed/reviewed by Ingo & Dave and has been in next for several weeks.
Thanks to:
Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave
Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren
Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf,
Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu
Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi
Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher
Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith,
Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang,
Yisheng Xie, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ZlBf
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Support for split PMD page table lock on 64-bit Book3S (Power8/9).
- Add support for HAVE_RELIABLE_STACKTRACE, so we properly support
live patching again.
- Add support for patching barrier_nospec in copy_from_user() and
syscall entry.
- A couple of fixes for our data breakpoints on Book3S.
- A series from Nick optimising TLB/mm handling with the Radix MMU.
- Numerous small cleanups to squash sparse/gcc warnings from Mathieu
Malaterre.
- Several series optimising various parts of the 32-bit code from
Christophe Leroy.
- Removal of support for two old machines, "SBC834xE" and "C2K"
("GEFanuc,C2K"), which is why the diffstat has so many deletions.
And many other small improvements & fixes.
There's a few out-of-area changes. Some minor ftrace changes OK'ed by
Steve, and a fix to our powernv cpuidle driver. Then there's a series
touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details
around pkey support. It was ack'ed/reviewed by Ingo & Dave and has
been in next for several weeks.
Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al
Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd
Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe
Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain,
Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo
Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal,
Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre,
Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica
Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel
Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo,
Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe,
Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing"
* tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits)
powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap
cpuidle: powernv: Fix promotion from snooze if next state disabled
powerpc: fix build failure by disabling attribute-alias warning in pci_32
ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"
powerpc: fix spelling mistake: "Usupported" -> "Unsupported"
powerpc/pkeys: Detach execute_only key on !PROT_EXEC
powerpc/powernv: copy/paste - Mask SO bit in CR
powerpc: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove support for Marvell mv64x60 i2c controller
powerpc/boot: Remove support for Marvell MPSC serial controller
powerpc/embedded6xx: Remove C2K board support
powerpc/lib: optimise PPC32 memcmp
powerpc/lib: optimise 32 bits __clear_user()
powerpc/time: inline arch_vtime_task_switch()
powerpc/Makefile: set -mcpu=860 flag for the 8xx
powerpc: Implement csum_ipv6_magic in assembly
powerpc/32: Optimise __csum_partial()
powerpc/lib: Adjust .balign inside string functions for PPC32
...
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
triggers. For example:
# cd /sys/kernel/debug/tracing
# echo 'snapshot' > events/ftrace/print/trigger
# echo 'cause snapshot' > trace_marker
The rest of the changes are various clean ups and also one stable fix that
was added late in the cycle.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWxftjBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qosyAQCgmhb+/HgRYIbsKa8Q70E2pMx5A/za
4rQ37Q9PhDUJlAD/aWXfrqcMm+buAU0yY4K+eb+f2feKXWXxdZ/fuh7+nA4=
=lpXM
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"One new feature was added to ftrace, which is the trace_marker now
supports triggers. For example:
# cd /sys/kernel/debug/tracing
# echo 'snapshot' > events/ftrace/print/trigger
# echo 'cause snapshot' > trace_marker
The rest of the changes are various clean ups and also one stable fix
that was added late in the cycle"
* tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (21 commits)
tracing: Use match_string() instead of open coding it in trace_set_options()
branch-check: fix long->int truncation when profiling branches
ring-buffer: Fix typo in comment
ring-buffer: Fix a bunch of typos in comments
tracing/selftest: Add test to test simple snapshot trigger for trace_marker
tracing/selftest: Add test to test hist trigger between kernel event and trace_marker
tracing/selftest: Add selftests to test trace_marker histogram triggers
ftrace/selftest: Fix reset_trigger() to handle triggers with filters
ftrace/selftest: Have the reset_trigger code be a bit more careful
tracing: Document trace_marker triggers
tracing: Allow histogram triggers to access ftrace internal events
tracing: Prevent further users of zero size static arrays in trace events
tracing: Have zero size length in filter logic be full string
tracing: Add trigger file for trace_markers tracefs/ftrace/print
tracing: Do not show filter file for ftrace internal events
tracing: Add brackets in ftrace event dynamic arrays
tracing: Have event_trace_init() called by trace_init_tracefs()
tracing: Add __find_event_file() to find event files without restrictions
tracing: Do not reference event data in post call triggers
tracepoints: Fix the descriptions of tracepoint_probe_register{_prio}
...
Kconfig now supports new functionality to perform textual substitution.
It has been a while since Linus suggested to move compiler option tests
from makefiles to Kconfig. Finally, here it is. The implementation has
been generalized into a Make-like macro language. Some built-in functions
such as 'shell' are provided. Variables and user-defined functions are
also supported so that 'cc-option', 'ld-option', etc. are implemented as
macros.
Summary:
- refactor package checks for building {m,n,q,g}conf
- remove unused/unmaintained localization support
- remove Kbuild cache
- drop CONFIG_CROSS_COMPILE support
- replace 'option env=' with direct variable expansion
- add built-in functions such as 'shell'
- support variables and user-defined functions
- add helper macros as as 'cc-option'
- add unit tests and a document of the new macro language
- add 'testconfig' to help
- fix warnings from GCC 8.1
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=o37+
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
"Kconfig now supports new functionality to perform textual
substitution. It has been a while since Linus suggested to move
compiler option tests from makefiles to Kconfig. Finally, here it is.
The implementation has been generalized into a Make-like macro
language.
Some built-in functions such as 'shell' are provided. Variables and
user-defined functions are also supported so that 'cc-option',
'ld-option', etc. are implemented as macros.
Summary:
- refactor package checks for building {m,n,q,g}conf
- remove unused/unmaintained localization support
- remove Kbuild cache
- drop CONFIG_CROSS_COMPILE support
- replace 'option env=' with direct variable expansion
- add built-in functions such as 'shell'
- support variables and user-defined functions
- add helper macros as as 'cc-option'
- add unit tests and a document of the new macro language
- add 'testconfig' to help
- fix warnings from GCC 8.1"
* tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kconfig: Avoid format overflow warning from GCC 8.1
kbuild: Move last word of nconfig help to the previous line
kconfig: Add testconfig into make help output
kconfig: add basic helper macros to scripts/Kconfig.include
kconfig: show compiler version text in the top comment
kconfig: test: add Kconfig macro language tests
Documentation: kconfig: document a new Kconfig macro language
kconfig: error out if a recursive variable references itself
kconfig: add 'filename' and 'lineno' built-in variables
kconfig: add 'info', 'warning-if', and 'error-if' built-in functions
kconfig: expand lefthand side of assignment statement
kconfig: support append assignment operator
kconfig: support simply expanded variable
kconfig: support user-defined function and recursively expanded variable
kconfig: begin PARAM state only when seeing a command keyword
kconfig: replace $(UNAME_RELEASE) with function call
kconfig: add 'shell' built-in function
kconfig: add built-in function support
kconfig: make default prompt of mainmenu less specific
kconfig: remove sym_expand_string_value()
...
- improve fixdep to coalesce consecutive slashes in dep-files
- fix some issues of the maintainer string generation in deb-pkg script
- remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
several tools and linker scripts
- clean-up modpost
- allow to enable the dead code/data elimination for PowerPC in EXPERT mode
- improve two coccinelle scripts for better performance
- pass endianness and machine size flags to sparse for all architecture
- misc fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2LYT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- improve fixdep to coalesce consecutive slashes in dep-files
- fix some issues of the maintainer string generation in deb-pkg script
- remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
several tools and linker scripts
- clean-up modpost
- allow to enable the dead code/data elimination for PowerPC in EXPERT
mode
- improve two coccinelle scripts for better performance
- pass endianness and machine size flags to sparse for all architecture
- misc fixes
* tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: add machine size to CHECKFLAGS
kbuild: add endianness flag to CHEKCFLAGS
kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice
scripts: Fixed printf format mismatch
scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation
coccinelle: deref_null: improve performance
coccinelle: mini_lock: improve performance
powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected
kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled
kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build
kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION
modpost: constify *modname function argument where possible
modpost: remove redundant is_vmlinux() test
modpost: use strstarts() helper more widely
modpost: pass struct elf_info pointer to get_modinfo()
checkpatch: remove VMLINUX_SYMBOL() check
vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL()
kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
export.h: remove code for prefixing symbols with underscore
depmod.sh: remove symbol prefix support
...
-----BEGIN PGP SIGNATURE-----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=twst
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This starts to support NVIDIA volta hardware with nouveau, and adds
amdgpu support for the GPU in the Kabylake-G (the intel + radeon
single package chip), along with some initial Intel icelake enabling.
Summary:
New Drivers:
- v3d - driver for broadcom V3D V3.x+ hardware
- xen-front - XEN PV display frontend
core:
- handle zpos normalization in the core
- stop looking at legacy pointers in atomic paths
- improved scheduler documentation
- improved aspect ratio validation
- aspect ratio support for 64:27 and 256:135
- drop unused control node code.
i915:
- Icelake (ICL) enabling
- GuC/HuC refactoring
- PSR/PSR2 enabling and fixes
- DPLL management refactoring
- DP MST fixes
- NV12 enabling
- HDCP improvements
- GEM/Execlist/reset improvements
- GVT improvements
- stolen memory first 4k fix
amdgpu:
- Vega 20 support
- VEGAM support (Kabylake-G)
- preOS scanout buffer reservation
- power management gfxoff support for raven
- SR-IOV fixes
- Vega10 power profiles and clock voltage control
- scatter/gather display support on CZ/ST
amdkfd:
- GFX9 dGPU support
- userptr memory mapping
nouveau:
- major refactoring for Volta GV100 support
tda998x:
- HDMI i2c CEC support
etnaviv:
- removed unused logging code
- license text cleanups
- MMU handling improvements
- timeout fence fix for 50 days uptime
tegra:
- IOMMU support in gr2d/gr3d drivers
- zpos support
vc4:
- syncobj support
- CTM, plane alpha and async cursor support
analogix_dp:
- HPD and aux chan fixes
sun4i:
- MIPI DSI support
tilcdc:
- clock divider fixes for OMAP-l138 LCDK board
rcar-du:
- R8A77965 support
- dma-buf fences fixes
- hardware indexed crtc/du group handling
- generic zplane property support
atmel-hclcdc:
- generic zplane property support
mediatek:
- use generic video mode function
exynos:
- S5PV210 FIMD variant support
- IPP v2 framework
- more HW overlays support"
* tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm: (1286 commits)
drm/amdgpu: fix 32-bit build warning
drm/exynos: fimc: signedness bug in fimc_setup_clocks()
drm/exynos: scaler: fix static checker warning
drm/amdgpu: Use dev_info() to report amdkfd is not supported for this ASIC
drm/amd/display: Remove use of division operator for long longs
drm/amdgpu: Update GFX info structure to match what vega20 used
drm/amdgpu/pp: remove duplicate assignment
drm/sched: add rcu_barrier after entity fini
drm/amdgpu: move VM BOs on LRU again
drm/amdgpu: consistenly use VM moved flag
drm/amdgpu: kmap PDs/PTs in amdgpu_vm_update_directories
drm/amdgpu: further optimize amdgpu_vm_handle_moved
drm/amdgpu: cleanup amdgpu_vm_validate_pt_bos v2
drm/amdgpu: rework VM state machine lock handling v2
drm/amdgpu: Add runtime VCN PG support
drm/amdgpu: Enable VCN static PG by default on RV
drm/amdgpu: Add VCN static PG support on RV
drm/amdgpu: Enable VCN CG by default on RV
drm/amdgpu: Add static CG control for VCN on RV
drm/exynos: Fix default value for zpos plane property
...
Here is the "big" char and misc driver patches for 4.18-rc1.
It's not a lot of stuff here, but there are some highlights:
- coreboot driver updates
- soundwire driver updates
- android binder updates
- fpga big sync, mostly documentation
- lots of minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxbXfQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymwCACdFbUy2kWwrpZWSfSBpawfrs75lLMAmwVOe+62
9aDsDWzDVUEFxF20qiE6
=CMJ3
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the "big" char and misc driver patches for 4.18-rc1.
It's not a lot of stuff here, but there are some highlights:
- coreboot driver updates
- soundwire driver updates
- android binder updates
- fpga big sync, mostly documentation
- lots of minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits)
vmw_balloon: fixing double free when batching mode is off
MAINTAINERS: Add driver-api/fpga path
fpga: clarify that unregister functions also free
documentation: fpga: move fpga-region.txt to driver-api
documentation: fpga: add bridge document to driver-api
documentation: fpga: move fpga-mgr.txt to driver-api
Documentation: fpga: move fpga overview to driver-api
fpga: region: kernel-doc fixes
fpga: bridge: kernel-doc fixes
fpga: mgr: kernel-doc fixes
fpga: use SPDX
fpga: region: change api, add fpga_region_create/free
fpga: bridge: change api, don't use drvdata
fpga: manager: change api, don't use drvdata
fpga: region: don't use drvdata in common fpga code
Drivers: hv: vmbus: Removed an unnecessary cast from void *
ver_linux: Drop redundant calls to system() to test if file is readable
ver_linux: Move stderr redirection from function parameter to function body
misc: IBM Virtual Management Channel Driver (VMC)
rpmsg: Correct support for MODULE_DEVICE_TABLE()
...
The Lustre filesystem has been in the kernel tree for over 5 years now.
While it has been an endless source of enjoyment for new kernel
developers learning how to do basic codingstyle cleanups, as well as an
semi-entertaining source of bewilderment from the vfs developers any
time they have looked into the codebase to try to figure out how to port
their latest api changes to this filesystem, it has not really moved
forward into the "this is in shape to get out of staging" despite many
half-completed attempts.
And getting code out of staging is the main goal of that portion of the
kernel tree. Code should not stagnate and it feels like having this
code in staging is only causing the development cycle of the filesystem
to take longer than it should. There is a whole separate out-of-tree
copy of this codebase where the developers work on it, and then random
changes are thrown over the wall at staging at some later point in time.
This dual-tree development model has never worked, and the state of this
codebase is proof of that.
So, let's just delete the whole mess. Now the lustre developers can go
off and work in their out-of-tree codebase and not have to worry about
providing valid changelog entries and breaking their patches up into
logical pieces. They can take the time they have spend doing those
types of housekeeping chores and get the codebase into a much better
shape, and it can be submitted for inclusion into the real part of the
kernel tree when ready.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge faddr2line updates from Josh Poimboeuf:
- revert faddr2line's default output to its original non-code-listing
output, and make the code listing an optional feature
- give faddr2line a real maintainer, so get_maintainer.pl will actually
CC me on future patches
* emailed patches from Josh Poimboeuf <jpoimboe@redhat.com>:
MAINTAINERS: add Josh Poimboeuf as faddr2line maintainer
scripts/faddr2line: make the new code listing format optional
Commit 6870c0165f ("scripts/faddr2line: show the code context")
radically altered the output format of the faddr2line tool. And while
the new list output format might have merit it broke my vim usage and
was hard to read.
Make the new format optional; using a '--list' argument and attempt to
make the output slightly easier to read by adding a little whitespace to
separate the different files and explicitly mark the line in question.
Cc: Changbin Du <changbin.du@intel.com>
Fixes: 6870c0165f ("scripts/faddr2line: show the code context")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
check that CC can build executables and use that compiler instead of HOSTCC
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In file included from scripts/kconfig/zconf.tab.c:2485:
scripts/kconfig/confdata.c: In function ‘conf_write’:
scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
sprintf(newname, "%s%s", dirname, basename);
^~
scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes
sprintf(newname, "%s%s", dirname, basename);
^~~~~~
scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097
sprintf(newname, "%s%s", dirname, basename);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
^~~~~~~~~~~
scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097
sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Increase the size of tmpname and newname to make GCC happy.
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
including:
- Extensive RST conversions and organizational work in the
memory-management docs thanks to Mike Rapoport.
- An update of Documentation/features from Andrea Parri and a script to
keep it updated.
- Various LICENSES updates from Thomas, along with a script to check SPDX
tags.
- Work to fix dangling references to documentation files; this involved a
fair number of one-liner comment changes outside of Documentation/
...and the usual list of documentation improvements, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----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=I6FG
-----END PGP SIGNATURE-----
Merge tag 'docs-4.18' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There's been a fair amount of work in the docs tree this time around,
including:
- Extensive RST conversions and organizational work in the
memory-management docs thanks to Mike Rapoport.
- An update of Documentation/features from Andrea Parri and a script
to keep it updated.
- Various LICENSES updates from Thomas, along with a script to check
SPDX tags.
- Work to fix dangling references to documentation files; this
involved a fair number of one-liner comment changes outside of
Documentation/
... and the usual list of documentation improvements, typo fixes, etc"
* tag 'docs-4.18' of git://git.lwn.net/linux: (103 commits)
Documentation: document hung_task_panic kernel parameter
docs/admin-guide/mm: add high level concepts overview
docs/vm: move ksm and transhuge from "user" to "internals" section.
docs: Use the kerneldoc comments for memalloc_no*()
doc: document scope NOFS, NOIO APIs
docs: update kernel versions and dates in tables
docs/vm: transhuge: split userspace bits to admin-guide/mm/transhuge
docs/vm: transhuge: minor updates
docs/vm: transhuge: change sections order
Documentation: arm: clean up Marvell Berlin family info
Documentation: gpio: driver: Fix a typo and some odd grammar
docs: ranoops.rst: fix location of ramoops.txt
scripts/documentation-file-ref-check: rewrite it in perl with auto-fix mode
docs: uio-howto.rst: use a code block to solve a warning
mm, THP, doc: Add document for thp_swpout/thp_swpout_fallback
w1: w1_io.c: fix a kernel-doc warning
Documentation/process/posting: wrap text at 80 cols
docs: admin-guide: add cgroup-v2 documentation
Revert "Documentation/features/vm: Remove arch support status file for 'pte_special'"
Documentation: refcount-vs-atomic: Update reference to LKMM doc.
...
The powerpc toolchain can compile combinations of 32/64 bit and
big/little endian, so it's convenient to consider, e.g.,
`CC -m64 -mbig-endian`
To be the C compiler for the purpose of invoking it to build target
artifacts. So overriding the CC variable to include these flags works
for this purpose.
Unfortunately that is not compatible with the way the proposed new
Kconfig macro language will work.
After previous patches in this series, these flags can be carefully
passed in using flags instead.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
scripts/kallsyms.c: function write_src:
"printf", the #1 format specifier "d" need arg type "int",
but the according arg "table_cnt" has type "unsigned int"
scripts/recordmcount.c: function do_file:
"fprintf", the #1 format specifier "d" need arg type "int",
but the according arg "(*w2)(ehdr->e_machine)" has type "unsigned int"
scripts/recordmcount.h: function find_secsym_ndx:
"fprintf", the #1 format specifier "d" need arg type "int",
but the according arg "txtndx" has type "unsigned int"
Signed-off-by: nixiaoming <nixiaoming@huawei.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kconfig got text processing tools like we see in Make. Add Kconfig
helper macros to scripts/Kconfig.include like we collect Makefile
macros in scripts/Kbuild.include.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
When using a recursively expanded variable, it is a common mistake
to make circular reference.
For example, Make terminates the following code:
X = $(X)
Y := $(X)
Let's detect the circular expansion in Kconfig, too.
On the other hand, a function that recurses itself is a commonly-used
programming technique. So, Make does not check recursion in the
reference with 'call'. For example, the following code continues
running eternally:
X = $(call X)
Y := $(X)
Kconfig allows circular expansion if one or more arguments are given,
but terminates when the same function is recursively invoked 1000 times,
assuming it is a programming mistake.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The special variables, $(filename) and $(lineno), are expanded to a
file name and its line number being parsed, respectively.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Syntax:
$(info,<text>)
$(warning-if,<condition>,<text>)
$(error-if,<condition>,<text)
The 'info' function prints a message to stdout as in Make.
The 'warning-if' and 'error-if' are similar to 'warning' and 'error'
in Make, but take the condition parameter. They are effective only
when the <condition> part is y.
Kconfig does not implement the lazy expansion as used in the 'if'
'and, 'or' functions in Make. In other words, Kconfig does not
support conditional expansion. The unconditional 'error' function
would always terminate the parsing, hence would be useless in Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Make expands the lefthand side of assignment statements. In fact,
Kbuild relies on it since kernel makefiles mostly look like this:
obj-$(CONFIG_FOO) += foo.o
Do likewise in Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Support += operator. This appends a space and the text on the
righthand side to a variable.
The timing of the evaluation of the righthand side depends on the
flavor of the variable. If the lefthand side was originally defined
as a simple variable, the righthand side is expanded immediately.
Otherwise, the expansion is deferred. Appending something to an
undefined variable results in a recursive variable.
To implement this, we need to remember the flavor of variables.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The previous commit added variable and user-defined function. They
work similarly in the sense that the evaluation is deferred until
they are used.
This commit adds another type of variable, simply expanded variable,
as we see in Make.
The := operator defines a simply expanded variable, expanding the
righthand side immediately. This works like traditional programming
language variables.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now, we got a basic ability to test compiler capability in Kconfig.
config CC_HAS_STACKPROTECTOR
def_bool $(shell,($(CC) -Werror -fstack-protector -E -x c /dev/null -o /dev/null 2>/dev/null) && echo y || echo n)
This works, but it is ugly to repeat this long boilerplate.
We want to describe like this:
config CC_HAS_STACKPROTECTOR
bool
default $(cc-option,-fstack-protector)
It is straight-forward to add a new function, but I do not like to
hard-code specialized functions like that. Hence, here is another
feature, user-defined function. This works as a textual shorthand
with parameterization.
A user-defined function is defined by using the = operator, and can
be referenced in the same way as built-in functions. A user-defined
function in Make is referenced like $(call my-func,arg1,arg2), but I
omitted the 'call' to make the syntax shorter.
The definition of a user-defined function contains $(1), $(2), etc.
in its body to reference the parameters. It is grammatically valid
to pass more or fewer arguments when calling it. We already exploit
this feature in our makefiles; scripts/Kbuild.include defines cc-option
which takes two arguments at most, but most of the callers pass only
one argument.
By the way, a variable is supported as a subset of this feature since
a variable is "a user-defined function with zero argument". In this
context, I mean "variable" as recursively expanded variable. I will
add a different flavored variable in the next commit.
The code above can be written as follows:
[Example Code]
success = $(shell,($(1)) >/dev/null 2>&1 && echo y || echo n)
cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
config CC_HAS_STACKPROTECTOR
def_bool $(cc-option,-fstack-protector)
[Result]
$ make -s alldefconfig && tail -n 1 .config
CONFIG_CC_HAS_STACKPROTECTOR=y
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, any statement line starts with a keyword with TF_COMMAND
flag. So, the following three lines are dead code.
alloc_string(yytext, yyleng);
zconflval.string = text;
return T_WORD;
If a T_WORD token is returned in this context, it will cause syntax
error in the parser anyway.
The next commit will support the assignment statement where a line
starts with an arbitrary identifier. So, I want the lexer to switch
to the PARAM state only when it sees a command keyword.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This accepts a single command to execute. It returns the standard
output from it.
[Example code]
config HELLO
string
default "$(shell,echo hello world)"
config Y
def_bool $(shell,echo y)
[Result]
$ make -s alldefconfig && tail -n 2 .config
CONFIG_HELLO="hello world"
CONFIG_Y=y
Caveat:
Like environments, functions are expanded in the lexer. You cannot
pass symbols to function arguments. This is a limitation to simplify
the implementation. I want to avoid the dynamic function evaluation,
which would introduce much more complexity.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit adds a new concept 'function' to do more text processing
in Kconfig.
A function call looks like this:
$(function,arg1,arg2,arg3,...)
This commit adds the basic infrastructure to expand functions.
Change the text expansion helpers to take arguments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If "mainmenu" is not specified, "Linux Kernel Configuration" is used
as a default prompt.
Given that Kconfig is used in other projects than Linux, let's use
a more generic prompt, "Main menu".
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no more caller of sym_expand_string_value().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Now that environments are expanded in the lexer, conf_parse() does
not need to expand them explicitly.
The hack introduced by commit 0724a7c32a ("kconfig: Don't leak
main menus during parsing") can go away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
There are two callers of file_lookup(), but there is no more reason
to expand the given path.
[1] zconf_initscan()
This is used to open the first Kconfig. sym_expand_string_value()
has never been used in a useful way here; before opening the first
Kconfig file, obviously there is no symbol to expand. If you use
expand_string_value() instead, environments in KBUILD_KCONFIG would
be expanded, but I do not see practical benefits for that.
[2] zconf_nextfile()
This is used to open the next file from 'source' statement.
Symbols in the path like "arch/$SRCARCH/Kconfig" needed expanding,
but it was replaced with the direct environment expansion. The
environment has already been expanded before the token is passed
to the parser.
By the way, file_lookup() was already buggy; it expanded a given path,
but it used the path before expansion for look-up:
if (!strcmp(name, file->name)) {
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax. It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.
Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
- conf_expand_value()
This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
- sym_expand_string_value()
This is used to expand strings in 'source' and 'mainmenu'
All of them are fixed values independent of user configuration. So,
they can be changed into the direct expansion instead of symbols.
This change makes the code much cleaner. The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.
sym_init() hard-coding 'UNAME_RELEASE' is also gone. 'UNAME_RELEASE'
should be replaced with an environment variable.
ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.
The new syntax is addicted by Make. The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F. Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.
At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.
The variables are expanded in the lexer so we can simplify the token
handling on the parser side.
For example, the following code works.
[Example code]
config MY_TOOLCHAIN_LIST
string
default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"
[Result]
$ make -s alldefconfig && tail -n 1 .config
CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
The kbuild cache was introduced to remember the result of shell
commands, some of which are expensive to compute, such as
$(call cc-option,...).
However, this turned out not so clever as I had first expected.
Actually, it is problematic. For example, "$(CC) -print-file-name"
is cached. If the compiler is updated, the stale search path causes
build error, which is difficult to figure out. Another problem
scenario is cache files could be touched while install targets are
running under the root permission. We can patch them if desired,
but the build infrastructure is getting uglier and uglier.
Now, we are going to move compiler flag tests to the configuration
phase. If this is completed, the result of compiler tests will be
naturally cached in the .config file. We will not have performance
issues of incremental building since this testing only happens at
Kconfig time.
To start this work with a cleaner code base, remove the kbuild
cache first.
Revert the following commits:
Commit 9a234a2e38 ("kbuild: create directory for make cache only when necessary")
Commit e17c400ae1 ("kbuild: shrink .cache.mk when it exceeds 1000 lines")
Commit 4e56207130 ("kbuild: Cache a few more calls to the compiler")
Commit 3298b690b2 ("kbuild: Add a cache for generated variables")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
gcc 5 supports a new -mcount-record option to generate ftrace
tables directly. This avoids the need to run record_mcount
manually.
Use this option when available.
So far doesn't use -mcount-nop, which also exists now.
This is needed to make ftrace work with LTO because the
normal record-mcount script doesn't run over the link
time output.
It should also improve build times slightly in the general
case.
Link: http://lkml.kernel.org/r/20171127213423.27218-12-andi@firstfloor.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The localization support is broken and appears unused.
There is no google hits on the update-po-config target.
And there is no recent (5 years) activity related to the localization.
So lets just drop this as it is no longer used.
Suggested-by: Ulf Magnusson <ulfalizer@gmail.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The mconf (or its infrastructure, lxdiaglog) depends on the ncurses.
Move and rename check-lxdialog.sh to mconf-cfg.sh to make it work in
the same way as for qconf and gconf.
This commit fixes some more weirdnesses.
The nconf also needs ncurses packages. HOSTLOADLIBES_nconf is set
to the libraries needed for nconf, but the cflags is not explicitly
set. Actually, nconf relies on the check-lxdialog.sh for the proper
cflags:
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
-DLOCALE
The code above passes the ncurses flags to all objects, even for conf,
qconf, gconf. Let's pass the ncurses flags only to mconf and nconf.
Currently, the presence of ncurses is not checked for nconf. Let's
show a prompt like the mconf case.
According to Randy's report, the shell scripts still need to carry
the fallback code in case the pkg-config fails to find the ncurses
packages.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Refactor the package checks for gconf in the same way as for qconf.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Currently, the necessary package checks for building qconf is
surrounded by ifeq ($(MAKECMDGOALS),xconfig) ... endif.
Then, Make will restart when .tmp_qtcheck is generated.
To simplify the Makefile, move the scripting to a separate file,
and use filechk. The shell script is executed everytime xconfig
is run, but it is not a costly script.
In the old code, 'pkg-config --exists' only checked Qt5Core / QtCore,
but the set of necessary packages should be checked.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
filechk displays two short logs; CHK for creating a temporary file,
and UPD for really updating the target.
IMHO, the build system can be quiet when the target file has not
been updated.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-05-24
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc).
2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers.
3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit.
4) Jiong Wang adds support for indirect and arithmetic shifts to NFP
5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible.
6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing
to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions.
7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT.
8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events.
9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code includes 'Kconfig' in ALLSOURCE_ARCHS, but
it should not (Kconfig is not an architecture). Replace this
with a find-generated string and directly assign it to
$ALLSOURCE_ARCHS. The find_all_archs() function is no longer
needed for a one-liner with obvious semantics, so inline the
arch generation into the surrounding conditional.
Signed-off-by: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Move rules looking for some special cases of safe dereferences before
the collection of NULL-tested values. The special cases are fairly
rare, but somewhat costly to find, because isomorphisms create many
variants of the rules. There is thus no need to search for them over
and over for each NULL tested expression. Collecting them just once
is sufficient and more efficient.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Replace <+... ...+> by ... when any. <+... ...+> is slow, and in some
obscure cases involving backward jumps it doesn't force the unlock to
actually come after the end of the if.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=4NJV
-----END PGP SIGNATURE-----
Merge drm-fixes-for-v4.17-rc6-urgent into drm-next
Need to backmerge some nouveau fixes to reduce
the nouveau -next conflicts a lot.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Documentation for eBPF helpers can be parsed from bpf.h and eventually
turned into a man page. Commit 6f96674dbd ("bpf: relax constraints on
formatting for eBPF helper documentation") changed the script used to
parse it, in order to allow for different indent style and to ease the
work for writing documentation for future helpers.
The script currently considers that the first tab can be replaced by 6
to 8 spaces. But the documentation for bpf_fib_lookup() uses a mix of
tabs (for the "Description" part) and of spaces ("Return" part), and
only has 5 space long indent for the latter.
We probably do not want to change the values accepted by the script each
time a new helper gets a new indent style. However, it is worth noting
that with those 5 spaces, the "Description" and "Return" part *look*
aligned in the generated patch and in `git show`, so it is likely other
helper authors will use the same length. Therefore, allow for helper
documentation to use 5 spaces only for the first indent level.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, strstarts() is only used in export_from_secname().
Use it more widely to improve the code readability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
get_(next_)modinfo takes a pointer and length pair of the .modinfo
section. Instead, pass struct elf_info pointer to reduce the number
of function arguments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now that VMLINUX_SYMBOL() is no-op and being removed, let's stop
checking VMLINUX_SYMBOL().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX.
Clean up the rest of scripts, and remove the Kconfig entry.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence the last argument of scripts/depmod.sh can be removed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence the --symbol-prefix option is unnecessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence the -s (--symbol-prefix) option is unnecessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence VMLINUX_SYMBOL_STR(foo) can be simplify replaced with "foo".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
There is multiple issues with the genaration of maintainer string
It uses DEBEMAIL and EMAIL enviroment variables, which may contain angle brackets,
creating invalid maintainer strings. The documented KBUILD_BUILD_USER and
KBUILD_BUILD_HOST variables are not used. Undocumented and uncommon NAME
variable is used. Refactor the Maintainer string to:
- use EMAIL or DEBEMAIL directly if they are in form "name <user@host>"
- use KBUILD_BUILD_USER and KBUILD_BUILD_HOST if set before falling
back to autodetection
- no longer use NAME variable or the useless Anonymous string
The logic is switched from multiline if/then/fi statements to compact
shell variable substition commands.
Reported-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
dtc gained some new warnings for OF graphs and unique unit addresses,
but they are currently much too noisy. So turn off
'graph_child_address', 'graph_port', and 'unique_unit_address' warnings
by default. They can be enabled by building dtbs with W=1.
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This adds the following commits from upstream:
84e414b0b5bc tests: Add a test case for the omit-if-no-ref keyword
4038fd90056e dtc: add ability to make nodes conditional on them being referenced
e1f139ea4900 checks: drop warning for missing PCI bridge bus-range
f4eba68d89ee checks: Print duplicate node name instead of parent name
46df1fb1b211 .travis.yml: Run valgrind checks via Travis
14a3002a1aee tests: Update valgrind suppressions for sw_tree1
02c5fe9debc0 tests: Remove valgrind error from tests/get_path
df536831d02c checks: add graph binding checks
2347c96edcbe checks: add a check for duplicate unit-addresses of child nodes
8f1b35f88395 Correct overlay syntactic sugar for generating target-path fragments
afbddcd418fb Suppress warnings on overlay fragments
119e27300359 Improve tests for dtc overlay generation
Signed-off-by: Rob Herring <robh@kernel.org>
Running 'test -r' on an awk variable name whose value is an empty
string results in test being run with no arguments, and causes system()
to return 0, which indicates success when used to test values returned
by function calls. This results in code within the if blocks being run
when it should not be.
Instead of testing if a file is accessible and readable via calls to
system("test -r " file), rely on the value returned by getline to perform
this kind of testing. Getline returns -1 on error, with the code within
the while loops not being run.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove stderr redirection to stdout from all the parameters to the
version() function, and put it with the body of the version() function
instead.
This improves code readability.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to missing a missing entry in file2alias.c MODULE_DEVICE_TABLE() are
not generating the proper module aliases. Add the needed entry here.
Fixes: bcabbccabf ("rpmsg: add virtio-based remote processor messaging bus")
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bpf syscall and selftests conflicts were trivial
overlapping changes.
The r8169 change involved moving the added mdelay from 'net' into a
different function.
A TLS close bug fix overlapped with the splitting of the TLS state
into separate TX and RX parts. I just expanded the tests in the bug
fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf
== X".
Signed-off-by: David S. Miller <davem@davemloft.net>
When addr2line output contains discriminator, the current awk script
cannot parse it. This patch fixes it by extracting key words using
regex which is more reliable.
$ scripts/faddr2line vmlinux tlb_flush_mmu_free+0x26
tlb_flush_mmu_free+0x26/0x50:
tlb_flush_mmu_free at mm/memory.c:258 (discriminator 3)
scripts/faddr2line: eval: line 173: unexpected EOF while looking for matching `)'
Link: http://lkml.kernel.org/r/1525323379-25193-1-git-send-email-changbin.du@intel.com
Fixes: 6870c0165f ("scripts/faddr2line: show the code context")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The original shell script works, but:
1) it is too slow;
2) it is hard to exclude rejex patterns
Convert it to perl.
Here, the new version is able to check the entire tree in
less than a second (after cached):
real 0m0,284s
user 0m0,668s
sys 0m0,778s
The old version takes more than a minute to complete (also
after cached):
real 1m17,905s
user 0m25,583s
sys 0m55,334s
It also produce less false-positives (if any).
The new script also contains an auto-fix mode.
Usually, file references get lost when they're moved to some other
place and/or renamed to .rst.
Add an experimental mode to auto-fix those.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Underscores in symbol names are translated into slashes for path names.
Filesystems treat consecutive slashes as if there was only one, so
let's do the same in the dependency list for easier grepping, etc.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- remove state comment in modpost
- extend MAINTAINERS entry to cover modpost and more makefiles
- fix missed building of SANCOV gcc-plugin
- replace left-over 'bison' with $(YACC)
- display short log when generating parer of genksyms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UJhz
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- remove state comment in modpost
- extend MAINTAINERS entry to cover modpost and more makefiles
- fix missed building of SANCOV gcc-plugin
- replace left-over 'bison' with $(YACC)
- display short log when generating parer of genksyms
* tag 'kbuild-fixes-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
genksyms: fix typo in parse.tab.{c,h} generation rules
kbuild: replace hardcoded bison in cmd_bison_h with $(YACC)
gcc-plugins: fix build condition of SANCOV plugin
MAINTAINERS: Update Kbuild entry with a few paths
modpost: delete stale comment
'quet' is replaced by 'quiet' in scripts/genksyms/Makefile
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit d677a4d601 ("Makefile: support flag
-fsanitizer-coverage=trace-cmp"), you miss to build the SANCOV
plugin under some circumstances.
CONFIG_KCOV=y
CONFIG_KCOV_ENABLE_COMPARISONS=y
Your compiler does not support -fsanitize-coverage=trace-pc
Your compiler does not support -fsanitize-coverage=trace-cmp
Under this condition, $(CFLAGS_KCOV) is not empty but contains a
space, so the following ifeq-conditional is false.
ifeq ($(CFLAGS_KCOV),)
Then, scripts/Makefile.gcc-plugins misses to add sancov_plugin.so to
gcc-plugin-y while the SANCOV plugin is necessary as an alternative
means.
Fixes: d677a4d601 ("Makefile: support flag -fsanitizer-coverage=trace-cmp")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
From now on, I'll start using my @kernel.org as my development e-mail.
As such, let's remove the entries that point to the old
mchehab@s-opensource.com at MAINTAINERS file.
For the files written with a copyright with mchehab@s-opensource,
let's keep Samsung on their names, using mchehab+samsung@kernel.org,
in order to keep pointing to my employer, with sponsors the work.
For the files written before I join Samsung (on July, 4 2013),
let's just use mchehab@kernel.org.
For bug reports, we can simply point to just kernel.org, as
this will reach my mchehab+samsung inbox anyway.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Brian Warner <brian.warner@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit 7840fea200 ("kbuild: Fix computing srcversion for modules")
fixed the comment above parse_source_files to refer to the new source_
line, but left this one behind that could still give the impression that
drivers/net/dummy.c appears in the deps_ variable.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The Python script used to parse and extract eBPF helpers documentation
from include/uapi/linux/bpf.h expects a very specific formatting for the
descriptions (single dot represents a space, '>' stands for a tab):
/*
...
*.int bpf_helper(list of arguments)
*.> Description
*.> > Start of description
*.> > Another line of description
*.> > And yet another line of description
*.> Return
*.> > 0 on success, or a negative error in case of failure
...
*/
This is too strict, and painful for developers who wants to add
documentation for new helpers. Worse, it is extremely difficult to check
that the formatting is correct during reviews. Change the format
expected by the script and make it more flexible. The script now works
whether or not the initial space (right after the star) is present, and
accepts both tabs and white spaces (or a combination of both) for
indenting description sections and contents.
Concretely, something like the following would now be supported:
/*
...
*int bpf_helper(list of arguments)
*......Description
*.> > Start of description...
*> > Another line of description
*..............And yet another line of description
*> Return
*.> ........0 on success, or a negative error in case of failure
...
*/
While at it, remove unnecessary carets from each regex used with match()
in the script. They are redundant, as match() tries to match from the
beginning of the string by default.
v2: Remove unnecessary caret when a regex is used with match().
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
-----BEGIN PGP SIGNATURE-----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=9LYY
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-04-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.18:
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 26 Apr 2018 08:21:01 PM AEST
# gpg: using RSA key FE558C72A67013C3
# gpg: Can't check signature: public key not found
Link: https://patchwork.freedesktop.org/patch/msgid/b33da7eb-efc9-ae6f-6f69-b7acd6df6797@mblankhorst.nl
The SPDX-License-Identifiers are growing in the kernel and so grow
expression failures and license IDs are used which have no corresponding
license text file in the LICENSES directory.
Add a script which gathers information from the LICENSES directory,
i.e. the various tags in the licenses and exception files and then scans
either input from stdin, which it treats as a single file or if started
without arguments it scans the full kernel tree.
It checks whether the license expression syntax is correct and also
validates whether the license identifiers used in the expressions are
available in the LICENSES files.
scripts/spdxcheck.py -h
usage: spdxcheck.py [-h] [-m MAXLINES] [-v] [path [path ...]]
SPDX expression checker
positional arguments:
path Check path or file. If not given full git tree scan.
For stdin use "-"
optional arguments:
-h, --help show this help message and exit
-m MAXLINES, --maxlines MAXLINES
Maximum number of lines to scan in a file. Default 15
-v, --verbose Verbose statistics output
include/dt-bindings/reset/amlogic,meson-axg-reset.h: 9:41 Invalid License ID: BSD
drivers/pinctrl/sh-pfc/pfc-r8a77965.c: 1:28 Invalid License ID: GPL-2.
include/dt-bindings/reset/amlogic,meson-axg-reset.h: 9:41 Invalid License ID: BSD
arch/x86/kernel/jailhouse.c: 1:28 Invalid License ID: GPL2.0
include/dt-bindings/reset/amlogic,meson-axg-reset.h: 9:41 Invalid License ID: BSD
arch/arm/mach-s3c24xx/h1940-bluetooth.c: 1:28 Invalid License ID: GPL-1.0
arch/x86/kernel/jailhouse.c: 1:28 Invalid License ID: GPL2.0
drivers/pinctrl/sh-pfc/pfc-r8a77965.c: 1:28 Invalid License ID: GPL-2.
include/dt-bindings/reset/amlogic,meson-axg-reset.h: 9:41 Invalid License ID: BSD
arch/x86/include/asm/jailhouse_para.h: 1:28 Invalid License ID: GPL2.0
arch/arm/mach-s3c24xx/h1940-bluetooth.c: 1:28 Invalid License ID: GPL-1.0
arch/x86/kernel/jailhouse.c: 1:28 Invalid License ID: GPL2.0
drivers/pinctrl/sh-pfc/pfc-r8a77965.c: 1:28 Invalid License ID: GPL-2.
include/dt-bindings/reset/amlogic,meson-axg-reset.h: 9:41 Invalid License ID: BSD
arch/x86/include/asm/jailhouse_para.h: 1:28 Invalid License ID: GPL2.0
License files: 14
Exception files: 1
License IDs 19
Exception IDs 1
Files checked: 61332
Lines checked: 669181
Files with SPDX: 16169
Files with errors: 5
real 0m2.642s
user 0m2.231s
sys 0m0.467s
That's a full tree sweep on my laptop. Note, this runs single threaded.
It scans by default the first 15 lines for a SPDX identifier where the
current max inside a top comment is at line 10. But that's going to be
faster once the identifiers are all in the first two lines as documented.
The python wizards will surely know how to do that smarter and faster, but
its at least better than no tool at all.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[jc: Fixed ironically erroneous SPDX tag and did chmod +x ]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Remove previous "overview" of eBPF helpers from user bpf.h header.
Replace it by a comment explaining how to process the new documentation
(to come in following patches) with a Python script to produce RST, then
man page documentation.
Also add the aforementioned Python script under scripts/. It is used to
process include/uapi/linux/bpf.h and to extract helper descriptions, to
turn it into a RST document that can further be processed with rst2man
to produce a man page. The script takes one "--filename <path/to/file>"
option. If the script is launched from scripts/ in the kernel root
directory, it should be able to find the location of the header to
parse, and "--filename <path/to/file>" is then optional. If it cannot
find the file, then the option becomes mandatory. RST-formatted
documentation is printed to standard output.
Typical workflow for producing the final man page would be:
$ ./scripts/bpf_helpers_doc.py \
--filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
$ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
$ man /tmp/bpf-helpers.7
Note that the tool kernel-doc cannot be used to document eBPF helpers,
whose signatures are not available directly in the header files
(pre-processor directives are used to produce them at the beginning of
the compilation process).
v4:
- Also remove overviews for newly added bpf_xdp_adjust_tail() and
bpf_skb_get_xfrm_state().
- Remove vague statement about what helpers are restricted to GPL
programs in "LICENSE" section for man page footer.
- Replace license boilerplate with SPDX tag for Python script.
v3:
- Change license for man page.
- Remove "for safety reasons" from man page header text.
- Change "packets metadata" to "packets" in man page header text.
- Move and fix comment on helpers introducing no overhead.
- Remove "NOTES" section from man page footer.
- Add "LICENSE" section to man page footer.
- Edit description of file include/uapi/linux/bpf.h in man page footer.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cherry-picked from dtc upstream commit e1f139ea4900fd0324c646822b4061fec6e08321.
Having a 'bus-range' property for PCI bridges should not be required,
so remove the warning when missing. There was some confusion with the
Linux kernel printing a message that no property is present and the OS
assigned the bus number. This message was intended to be informational
rather than a warning.
When the firmware doesn't enumerate the PCI bus and leaves it up to the
OS to do, then it is perfectly fine for the OS to assign bus numbers
and bus-range is not necessary.
There are a few cases where bus-range is needed or useful as Arnd
Bergmann summarized:
- Traditionally Linux avoided using multiple PCI domains, but instead
configured separate PCI host bridges to have non-overlapping
bus ranges so we can present them to user space as a single
domain, and run the kernel without CONFIG_PCI_DOMAINS.
Specifying the bus ranges this way would and give stable bus
numbers across boots when the probe order is not fixed.
- On certain ARM64 systems, we must only use the first
128 bus numbers based on the way the IOMMU identifies
the device with truncated bus/dev/fn number. There are probably
others like this, with various limitations.
- To leave some room for hotplugged devices, each slot on
a host bridge can in theory get a range of bus numbers
that are available when assigning bus numbers at boot time
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by
flex, bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by
flex, bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tD6R
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by flex,
bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by flex,
bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
* tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: extend output of 'listnewconfig'
kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg
Kbuild: fix # escaping in .cmd files for future Make
kbuild: deb-pkg: split generating packaging and build
kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
kbuild: rename *-asn1.[ch] to *.asn1.[ch]
kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
.gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
kbuild: add %.dtb.S and %.dtb to 'targets' automatically
kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically
genksyms: generate lexer and parser during build instead of shipping
kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
.gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
kbuild: use HOSTLDFLAGS for single .c executables
Pull x86 fixes from Thomas Gleixner:
"A set of fixes and updates for x86:
- Address a swiotlb regression which was caused by the recent DMA
rework and made driver fail because dma_direct_supported() returned
false
- Fix a signedness bug in the APIC ID validation which caused invalid
APIC IDs to be detected as valid thereby bloating the CPU possible
space.
- Fix inconsisten config dependcy/select magic for the MFD_CS5535
driver.
- Fix a corruption of the physical address space bits when encryption
has reduced the address space and late cpuinfo updates overwrite
the reduced bit information with the original value.
- Dominiks syscall rework which consolidates the architecture
specific syscall functions so all syscalls can be wrapped with the
same macros. This allows to switch x86/64 to struct pt_regs based
syscalls. Extend the clearing of user space controlled registers in
the entry patch to the lower registers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix signedness bug in APIC ID validity checks
x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
x86/olpc: Fix inconsistent MFD_CS5535 configuration
swiotlb: Use dma_direct_supported() for swiotlb_ops
syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
syscalls/core, syscalls/x86: Clean up syscall stub naming convention
syscalls/x86: Extend register clearing on syscall entry to lower registers
syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
x86/syscalls: Don't pointlessly reload the system call number
x86/mm: Fix documentation of module mapping range with 4-level paging
x86/cpuid: Switch to 'static const' specifier
We at Red Hat/Fedora have generally tried to have a per file breakdown of
every config option we set. This makes it easy for us to add new options
when they are exposed and keep a changelog of why they were set.
A Fedora example is here:
https://src.fedoraproject.org/cgit/rpms/kernel.git/tree/configs/fedora/generic
Using various merge scripts, we build up a config file and run it through
'make listnewconfig' and 'make oldnoconfig'. The idea is to print out new
config options that haven't been manually set and use the default until
a patch is posted to set it properly.
To speed things up, it would be nice to make it easier to generate a
patch to post the default setting. The output of 'make listnewconfig'
has two issues that limit us:
- it doesn't provide the default value
- it doesn't provide the new 'choice' options that get flagged in
'oldconfig'
This patch extends 'listnewconfig' to address the above two issues.
This allows us to run a script
make listnewconfig | rhconfig-tool -o patches; git send-email patches/
The output of 'make listnewconfig':
CONFIG_NET_EMATCH_IPT
CONFIG_IPVLAN
CONFIG_ICE
CONFIG_NET_VENDOR_NI
CONFIG_IEEE802154_MCR20A
CONFIG_IR_IMON_DECODER
CONFIG_IR_IMON_RAW
The new output of 'make listnewconfig':
CONFIG_KERNEL_XZ=n
CONFIG_KERNEL_LZO=n
CONFIG_NET_EMATCH_IPT=n
CONFIG_IPVLAN=n
CONFIG_ICE=n
CONFIG_NET_VENDOR_NI=y
CONFIG_IEEE802154_MCR20A=n
CONFIG_IR_IMON_DECODER=n
CONFIG_IR_IMON_RAW=n
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The new-kernel-pkg script is only present when grubby is installed, but it
may not always be the case. So if the script isn't present, attempt to use
the kernel-install script as a fallback instead.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I have one regression fix for a minor build problem after the architecture
removal series, plus a rework of the barriers in the readl/writel
functions, thanks to work by Sinan Kaya:
This started from a discussion on the linuxpcc and rdma mailing lists
[1]. To summarize, we decided that architectures are responsible to
serialize readl() and writel() accesses on a device MMIO space relative
to DMA performed by that device.
This series provides a pessimistic implementation of that behavior for
asm-generic/io.h, which is in turn used by a number of architectures
(h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
xtensa). Some of those presumably need no extra barriers, or something
weaker than rmb()/wmb(), and they are advised to override the new default
for better performance.
For inb()/outb(), the same barriers are used, but architectures might
want to add another barrier to outb() here if that can guarantee
non-posted behavior (some architectures can, others cannot do that).
The readl_relaxed()/writel_relaxed() family of functions retains the
existing behavior with no extra barriers.
[1]: https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oBQh
-----END PGP SIGNATURE-----
Merge tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"I have one regression fix for a minor build problem after the
architecture removal series, plus a rework of the barriers in the
readl/writel functions, thanks to work by Sinan Kaya:
This started from a discussion on the linuxpcc and rdma mailing
lists[1]. To summarize, we decided that architectures are responsible
to serialize readl() and writel() accesses on a device MMIO space
relative to DMA performed by that device.
This series provides a pessimistic implementation of that behavior for
asm-generic/io.h, which is in turn used by a number of architectures
(h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
xtensa). Some of those presumably need no extra barriers, or something
weaker than rmb()/wmb(), and they are advised to override the new
default for better performance.
For inb()/outb(), the same barriers are used, but architectures might
want to add another barrier to outb() here if that can guarantee
non-posted behavior (some architectures can, others cannot do that).
The readl_relaxed()/writel_relaxed() family of functions retains the
existing behavior with no extra barriers"
[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html
* tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
io: change writeX_relaxed() to remove barriers
io: change readX_relaxed() to remove barriers
dts: remove cris & metag dts hard link file
io: change inX() to have their own IO barrier overrides
io: change outX() to have their own IO barrier overrides
io: define stronger ordering for the default writeX() implementation
io: define stronger ordering for the default readX() implementation
io: define several IO & PIO barrier types for the asm-generic version
Using bool in a bitfield isn't a good idea as the alignment behavior is
arch implementation defined.
Suggest using unsigned int or u<8|16|32> instead.
Link: http://lkml.kernel.org/r/e22fb871b1b7f2fda4b22f3a24e0d7f092eb612c.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow a space between a colon and subsequent opening bracket. This
sequence may occur in inline assembler statements like
asm(
"ldr %[out], [%[in]]\n\t"
: [out] "=r" (ret)
: [in] "r" (addr)
);
Link: http://lkml.kernel.org/r/20180403191655.23700-1-xypron.glpk@gmx.de
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kernel style seems to prefer line wrapping an assignment with the
assignment operator on the previous line like:
<leading tabs> identifier =
expression;
over
<leading tabs> identifier
= expression;
somewhere around a 50:1 ratio
$ git grep -P "[^=]=\s*$" -- "*.[ch]" | wc -l
52008
$ git grep -P "^\s+[\*\/\+\|\%\-]?=[^=>]" | wc -l
1161
So add a --strict test for that condition.
Link: http://lkml.kernel.org/r/1522275726.2210.12.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are occasions where symbolic perms are used in a ternary like
return (channel == 0) ? S_IRUGO | S_IWUSR : S_IRUGO;
The current test will find the first use "S_IRUGO | S_IWUSR" but not the
second use "S_IRUGO" on the same line.
Improve the test to look for all instances on a line.
Link: http://lkml.kernel.org/r/1522127944.12357.49.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The get_quoted_string function does not expect invalid arguments.
The $stat test can return non-statements for complicated macros like
TRACE_EVENT.
Allow the $stat block and test for vsprintf misuses to exceed the actual
block length and possibly test invalid lines by validating the arguments
of get_quoted_string.
Return "" if either get_quoted_string argument is undefined.
Miscellanea:
o Properly align the comment for the vsprintf extension test
Link: http://lkml.kernel.org/r/9e9725342ca3dfc0f5e3e0b8ca3c482b0e5712cc.1520356392.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Usage of the new %px specifier potentially leaks sensitive information.
Printing kernel addresses exposes the kernel layout in memory, this is
potentially exploitable. We have tools in the kernel to help us do the
right thing. We can have checkpatch warn developers of potential
dangers of using %px.
Have checkpatch emit a warning for usage of specifier %px.
Link: http://lkml.kernel.org/r/1519700648-23108-5-git-send-email-me@tobin.cc
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch currently contains duplicate code. We can define a sub
routine and call that instead. This reduces code duplication and line
count.
Add subroutine get_stat_here().
Link: http://lkml.kernel.org/r/1519700648-23108-4-git-send-email-me@tobin.cc
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Variables are declared and not used, we should remove them.
Link: http://lkml.kernel.org/r/1519700648-23108-3-git-send-email-me@tobin.cc
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch currently contains duplicate code. We can define a sub
routine and call that instead. This reduces code duplication and line
count.
Add subroutine get_stat_real()
Link: http://lkml.kernel.org/r/1519700648-23108-2-git-send-email-me@tobin.cc
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the crypto API *_ON_STACK to $declaration_macros.
Resolves the following false warning:
WARNING: Missing a blank line after declarations
+ int err;
+ SHASH_DESC_ON_STACK(desc, ctx_p->shash_tfm);
Link: http://lkml.kernel.org/r/1518941636-4484-1-git-send-email-gilad@benyossef.com
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add SPDX license tag check based on the rules defined in
Documentation/process/license-rules.rst. To summarize, SPDX license
tags should be on the 1st line (or 2nd line in scripts) using the
appropriate comment style for the file type.
Link: http://lkml.kernel.org/r/20180202154026.15298-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Igor Stoppa <igor.stoppa@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bare email addresses with non alphanumeric characters require escape
quoting before being substituted in the parse_email routine.
e.g. Reported-by: syzbot+bbd8e9a06452cc48059b@syzkaller.appspotmail.com
Do so.
Link: http://lkml.kernel.org/r/1518631805.3678.12.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I tried building using a freshly built Make (4.2.1-69-g8a731d1), but
already the objtool build broke with
orc_dump.c: In function ‘orc_dump’:
orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations]
if (elf_getshdrnum(elf, &nr_sections)) {
Turns out that with that new Make, the backslash was not removed, so cpp
didn't see a #include directive, grep found nothing, and
-DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS.
Now, that new Make behaviour is documented in their NEWS file:
* WARNING: Backward-incompatibility!
Number signs (#) appearing inside a macro reference or function invocation
no longer introduce comments and should not be escaped with backslashes:
thus a call such as:
foo := $(shell echo '#')
is legal. Previously the number sign needed to be escaped, for example:
foo := $(shell echo '\#')
Now this latter will resolve to "\#". If you want to write makefiles
portable to both versions, assign the number sign to a variable:
C := \#
foo := $(shell echo '$C')
This was claimed to be fixed in 3.81, but wasn't, for some reason.
To detect this change search for 'nocomment' in the .FEATURES variable.
This also fixes up the two make-cmd instances to replace # with $(pound)
rather than with \#. There might very well be other places that need
similar fixup in preparation for whatever future Make release contains
the above change, but at least this builds an x86_64 defconfig with the
new make.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tidy the naming convention for compat syscall subs. Hints which describe
the purpose of the stub go in front and receive a double underscore to
denote that they are generated on-the-fly by the COMPAT_SYSCALL_DEFINEx()
macro.
For the generic case, this means:
t kernel_waitid # common C function (see kernel/exit.c)
__do_compat_sys_waitid # inlined helper doing the actual work
# (takes original parameters as declared)
T __se_compat_sys_waitid # sign-extending C function calling inlined
# helper (takes parameters of type long,
# casts them to unsigned long and then to
# the declared type)
T compat_sys_waitid # alias to __se_compat_sys_waitid()
# (taking parameters as declared), to
# be included in syscall table
For x86, the naming is as follows:
t kernel_waitid # common C function (see kernel/exit.c)
__do_compat_sys_waitid # inlined helper doing the actual work
# (takes original parameters as declared)
t __se_compat_sys_waitid # sign-extending C function calling inlined
# helper (takes parameters of type long,
# casts them to unsigned long and then to
# the declared type)
T __ia32_compat_sys_waitid # IA32_EMULATION 32-bit-ptregs -> C stub,
# calls __se_compat_sys_waitid(); to be
# included in syscall table
T __x32_compat_sys_waitid # x32 64-bit-ptregs -> C stub, calls
# __se_compat_sys_waitid(); to be included
# in syscall table
If only one of IA32_EMULATION and x32 is enabled, __se_compat_sys_waitid()
may be inlined into the stub __{ia32,x32}_compat_sys_waitid().
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180409105145.5364-3-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tidy the naming convention for compat syscall subs. Hints which describe
the purpose of the stub go in front and receive a double underscore to
denote that they are generated on-the-fly by the SYSCALL_DEFINEx() macro.
For the generic case, this means (0xffffffff prefix removed):
810f08d0 t kernel_waitid # common C function (see kernel/exit.c)
<inline> __do_sys_waitid # inlined helper doing the actual work
# (takes original parameters as declared)
810f1aa0 T __se_sys_waitid # sign-extending C function calling inlined
# helper (takes parameters of type long;
# casts them to the declared type)
810f1aa0 T sys_waitid # alias to __se_sys_waitid() (taking
# parameters as declared), to be included
# in syscall table
For x86, the naming is as follows:
810efc70 t kernel_waitid # common C function (see kernel/exit.c)
<inline> __do_sys_waitid # inlined helper doing the actual work
# (takes original parameters as declared)
810efd60 t __se_sys_waitid # sign-extending C function calling inlined
# helper (takes parameters of type long;
# casts them to the declared type)
810f1140 T __ia32_sys_waitid # IA32_EMULATION 32-bit-ptregs -> C stub,
# calls __se_sys_waitid(); to be included
# in syscall table
810f1110 T sys_waitid # x86 64-bit-ptregs -> C stub, calls
# __se_sys_waitid(); to be included in
# syscall table
For x86, sys_waitid() will be re-named to __x64_sys_waitid in a follow-up
patch.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180409105145.5364-2-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Here is the patch set for the 4.17-rc1 merge window. This set
represents improvements to the scripts/leaking_addresses.pl script. The
major improvement is that with this set applied the script actually runs
in a reasonable amount of time (less than a minute on a standard stock
Ubuntu user desktop). Also, we have a second maintainer now and a tree
hosted on kernel.org
We do a few code clean ups. We fix the command help output. Handling
of the vsyscall address range is fixed to check the whole range instead
of just the start/end addresses. We add support for 5 page table levels
(suggested on LKML). We use a system command to get the machine
architecture instead of using Perl. Calling this command for every
regex comparison is what previously choked the script, caching the
result of this call gave the major speed improvement. We add support
for scanning 32-bit kernels using the user/kernel memory split. Path
skipping code refactored and simplified (meaning easier script
configuration). We remove version numbering. We add a variable name to
improve readability of a regex and finally we check filenames for
leaking addresses.
Currently script scans /proc/PID for all PID. With this set applied we
only scan for PID==1. It was observed that on an idle system files under
/proc/PID are predominantly the same for all processes. Also it was
noted that the script does not scan _all_ the kernel since it only scans
active processes. Scanning only for PID==1 makes explicit the inherent
flaw in the script that the scan is only partial and also speeds things up.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
-----BEGIN PGP SIGNATURE-----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=9BLH
-----END PGP SIGNATURE-----
Merge tag 'leaks-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks
Pull leaking-addresses updates from Tobin Harding:
"This set represents improvements to the scripts/leaking_addresses.pl
script.
The major improvement is that with this set applied the script
actually runs in a reasonable amount of time (less than a minute on a
standard stock Ubuntu user desktop). Also, we have a second maintainer
now and a tree hosted on kernel.org
We do a few code clean ups. We fix the command help output. Handling
of the vsyscall address range is fixed to check the whole range
instead of just the start/end addresses. We add support for 5 page
table levels (suggested on LKML). We use a system command to get the
machine architecture instead of using Perl. Calling this command for
every regex comparison is what previously choked the script, caching
the result of this call gave the major speed improvement. We add
support for scanning 32-bit kernels using the user/kernel memory
split. Path skipping code refactored and simplified (meaning easier
script configuration). We remove version numbering. We add a variable
name to improve readability of a regex and finally we check filenames
for leaking addresses.
Currently script scans /proc/PID for all PID. With this set applied we
only scan for PID==1. It was observed that on an idle system files
under /proc/PID are predominantly the same for all processes. Also it
was noted that the script does not scan _all_ the kernel since it only
scans active processes. Scanning only for PID==1 makes explicit the
inherent flaw in the script that the scan is only partial and also
speeds things up"
* tag 'leaks-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks:
MAINTAINERS: Update LEAKING_ADDRESSES
leaking_addresses: check if file name contains address
leaking_addresses: explicitly name variable used in regex
leaking_addresses: remove version number
leaking_addresses: skip '/proc/1/syscall'
leaking_addresses: skip all /proc/PID except /proc/1
leaking_addresses: cache architecture name
leaking_addresses: simplify path skipping
leaking_addresses: do not parse binary files
leaking_addresses: add 32-bit support
leaking_addresses: add is_arch() wrapper subroutine
leaking_addresses: use system command to get arch
leaking_addresses: add support for 5 page table levels
leaking_addresses: add support for kernel config file
leaking_addresses: add range check for vsyscall memory
leaking_addresses: indent dependant options
leaking_addresses: remove command examples
leaking_addresses: remove mention of kptr_restrict
leaking_addresses: fix typo function not called
Pull general security layer updates from James Morris:
- Convert security hooks from list to hlist, a nice cleanup, saving
about 50% of space, from Sargun Dhillon.
- Only pass the cred, not the secid, to kill_pid_info_as_cred and
security_task_kill (as the secid can be determined from the cred),
from Stephen Smalley.
- Close a potential race in kernel_read_file(), by making the file
unwritable before calling the LSM check (vs after), from Kees Cook.
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: convert security hooks to use hlist
exec: Set file unwritable before LSM check
usb, signal, security: only pass the cred, not the secid, to kill_pid_info_as_cred and security_task_kill
Move debian/ directory generation out of builddeb to a new script,
mkdebian. The package build commands are kept in builddeb, which
is now an internal command called from debian/rules.
With these changes in place, we can now use dpkg-buildpackage from
deb-pkg and bindeb-pkg removing need for handrolled source/changes
generation.
This patch is based on the criticism of the current state of builddeb
discussed on:
https://patchwork.kernel.org/patch/9656403/
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.
Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
Example 2) %.o <- %.c <- %.c_shipped
A couple of makefiles mark such targets as .PRECIOUS to prevent Make
from deleting them, but the correct way is to use .SECONDARY.
.SECONDARY
Prerequisites of this special target are treated as intermediate
files but are never automatically deleted.
.PRECIOUS
When make is interrupted during execution, it may delete the target
file it is updating if the file was modified since make started.
If you mark the file as precious, make will never delete the file
if interrupted.
Both can avoid deletion of intermediate files, but the difference is
the behavior when Make is interrupted; .SECONDARY deletes the target,
but .PRECIOUS does not.
The use of .PRECIOUS is relatively rare since we do not want to keep
partially constructed (possibly corrupted) targets.
Another difference is that .PRECIOUS works with pattern rules whereas
.SECONDARY does not.
.PRECIOUS: $(obj)/%.lex.c
works, but
.SECONDARY: $(obj)/%.lex.c
has no effect. However, for the reason above, I do not want to use
.PRECIOUS which could cause obscure build breakage.
The targets specified as .SECONDARY must be explicit. $(targets)
contains all targets that need to include .*.cmd files. So, the
intermediates you want to keep are mostly in there. Therefore, mark
$(targets) as .SECONDARY. It means primary targets are also marked
as .SECONDARY, but I do not see any drawback for this.
I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This
will make Kbuild search for non-existing .*.cmd files, but this is
not a noticeable performance issue.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Our convention is to distinguish file types by suffixes with a period
as a separator.
*-asn1.[ch] is a different pattern from other generated sources such
as *.lex.c, *.tab.[ch], *.dtb.S, etc. More confusing, files with
'-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in
files:
net/netfilter/nf_conntrack_h323_asn1.c
include/linux/netfilter/nf_conntrack_h323_asn1.h
include/linux/sunrpc/gss_asn1.h
Rename generated files to *.asn1.[ch] for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Another common pattern that consists of chained commands is to compile
a DTB as binary data into the kernel image or a module. It is used in
several places in the source tree. Support it in the core Makefile.
$(call if_changed,dt_S_dtb) is more suitable than $(call cmd,dt_S_dtb)
in case cmd_dt_S_dtb is changed in the future.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Files generated by if_changed* must be added to 'targets' to include
*.cmd files. Otherwise, they would be regenerated every time.
The build system automatically adds objects to 'targets' where
appropriate, such as obj-y, extra-y, etc. but does nothing for
intermediate files. So, each Makefile needs to add them by itself.
There are some common cases where objects are generated by chained
rules. Lexers and parsers are compiled like follows:
%.lex.o <- %.lex.c <- %.l
%.tab.o <- %.tab.c <- %.y
They are common patterns, so it is reasonable to take care of them
in the core Makefile instead of requiring each Makefile to do so.
At this moment, you cannot delete 'target += zconf.lex.c' in the
Kconfig Makefile because zconf.lex.c is included from zconf.tab.c
instead of being compiled separately. It should be deleted after
Kconfig is more refactored.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Now that the kernel build supports flex and bison, remove the _shipped
files and generate them during the build instead.
There are no more shipped lexer and parser, so I ripped off the rules
in scripts/Malefile.lib that were used for REGENERATE_PARSERS.
The genksyms parser has ambiguous grammar, which would emit warnings:
scripts/genksyms/parse.y: warning: 9 shift/reduce conflicts [-Wconflicts-sr]
scripts/genksyms/parse.y: warning: 5 reduce/reduce conflicts [-Wconflicts-rr]
They are normally suppressed, but displayed when W=1 is given.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers,
respectively. Clean them up globally from the top Makefile.
Some of the final host programs those lexer/parser are linked into
are necessary for building external modules, but the intermediates
are unneeded. They can be cleaned away by 'make clean' instead of
'make mrproper'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
These patterns are common to host programs that require lexer and parser.
Move them to the top .gitignore.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
When compiling executables from a single .c file, the linker is also
invoked. Pass the HOSTLDFLAGS like for other linker commands.
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Sometimes files may be created by using output from printk. As the scan
traverses the directory tree we should parse each path name and check if
it is leaking an address.
Add check for leaking address on each path name.
Suggested-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently sub routine may_leak_address() is checking regex against Perl
special variable $_ which is _fortunately_ being set correctly in a loop
before this sub routine is called. We already have declared a variable
to hold this value '$line' we should use it.
Use $line in regex match instead of implicit $_
Signed-off-by: Tobin C. Harding <me@tobin.cc>
We have git now, we don't need a version number. This was originally
added because leaking_addresses.pl shamelessly (and mindlessly) copied
checkpatch.pl
Remove version number from script.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
The pointers listed in /proc/1/syscall are user pointers, and negative
syscall args will show up like kernel addresses.
For example
/proc/31808/syscall: 0 0x3 0x55b107a38180 0x2000 0xffffffffffffffb0 \
0x55b107a302d0 0x55b107a38180 0x7fffa313b8e8 0x7ff098560d11
Skip parsing /proc/1/syscall
Suggested-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
When the system is idle it is likely that most files under /proc/PID
will be identical for various processes. Scanning _all_ the PIDs under
/proc is unnecessary and implies that we are thoroughly scanning /proc.
This is _not_ the case because there may be ways userspace can trigger
creation of /proc files that leak addresses but were not present during
a scan. For these two reasons we should exclude all PID directories
under /proc except '1/'
Exclude all /proc/PID except /proc/1.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently we are repeatedly calling `uname -m`. This is causing the
script to take a long time to run (more than 10 seconds to parse
/proc/kallsyms). We can use Perl state variables to cache the result of
the first call to `uname -m`. With this change in place the script
scans the whole kernel in under a minute.
Cache machine architecture in state variable.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script has multiple configuration arrays. This is confusing,
evident by the fact that a bunch of the entries are in the wrong place.
We can simplify the code by just having a single array for absolute
paths to skip and a single array for file names to skip wherever they
appear in the scanned directory tree. There are also currently multiple
subroutines to handle the different arrays, we can reduce these to a
single subroutine also.
Simplify the path skipping code.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script parses binary files. Since we are scanning for
readable kernel addresses there is no need to parse binary files. We
can use Perl to check if file is binary and skip parsing it if so.
Do not parse binary files.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script only supports x86_64 and ppc64. It would be nice to be
able to scan 32-bit machines also. We can add support for 32-bit
architectures by modifying how we check for false positives, taking
advantage of the page offset used by the kernel, and using the correct
regular expression.
Support for 32-bit machines is enabled by the observation that the kernel
addresses on 32-bit machines are larger [in value] than the page offset.
We can use this to filter false positives when scanning the kernel for
leaking addresses.
Programmatic determination of the running architecture is not
immediately obvious (current 32-bit machines return various strings from
`uname -m`). We therefore provide a flag to enable scanning of 32-bit
kernels. Also we can check the kernel config file for the offset and if
not found default to 0xc0000000. A command line option to parse in the
page offset is also provided. We do automatically detect architecture
if running on ix86.
Add support for 32-bit kernels. Add a command line option for page
offset.
Suggested-by: Kaiwan N Billimoria <kaiwan.billimoria@gmail.com>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently there is duplicate code when checking the architecture type.
We can remove the duplication by implementing a wrapper function
is_arch().
Implement and use wrapper function is_arch().
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script uses Perl to get the machine architecture. This can be
erroneous since Perl uses the architecture of the machine that Perl was
compiled on not the architecture of the running machine. We should use
the systems `uname` command instead.
Use `uname -m` instead of Perl to get the machine architecture.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script only supports 4 page table levels because of the way
the kernel address regular expression is crafted. We can do better than
this. Using previously added support for kernel configuration options we
can get the number of page table levels defined by
CONFIG_PGTABLE_LEVELS. Using this value a correct regular expression can
be crafted. This only supports 5 page tables on x86_64.
Add support for 5 page table levels on x86_64.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Features that rely on the ability to get kernel configuration options
are ready to be implemented in script. In preparation for this we can
add support for kernel config options as a separate patch to ease
review.
Add support for locating and parsing kernel configuration file.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Masahiro Yamada