Bits 16-31 are reserved, so the old code just reads the whole register to
get bits 0-15, assuming the reserved bits would be 0 (which seems true
on current hardware, but who knows...).
This commit properly masks out the reserved bits when reading and
doesn't touch the reserved bits while writing.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For calculating FIFO offsets, the sizes of preceding fifos need to be
known. For filling the GDFIFOCFG register, these fifo sizes were read
from hardware registers. However, these values were written to these
registers just a few lines before, so we can just use the values written
instead.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason, the value of the HPTXFSIZ register was built in the
ptxfsiz variable, while there was also a hptxfsiz variable availble.
Better just use that and remove the (now unused) ptxfsiz variable.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value of the hcchar register is built from individual values by
shifting and masking. Before, the debug output extracted the individual
values out of the complete hcchar register again by doing the reverse.
This commit makes the debug output use the original values instead.
One debug message got removed, since it would always print a fixed value
of zero.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This line extracted the available queue space without properly shifting
it. Since the code only cared wether it was zero or not, it worked as
expected without the shift, but adding shift makes the code cleaner.
While we're here, store the result in a helper variable that was already
declared to increase readability a bit more.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This (read-only) register was read twice, storing it for later use the
second time. Now it is only read once, storing it right away.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Various register fields wider than one bit have constants defined for
their value. Previously, these registers would define the values as they
appear in the register, so shifted to the right to the position the
value appears in the register.
This commit changes those constants to their natural values (e.g, 0, 1,
2, etc.), as they are after shifting the register value to the right.
This also changes all relevant code to shift the values before comparing
them with constants.
This has the advantage that the values can be stored in smaller
variables (now they always require a u32) and makes the handling of
these values more consistent with other register fields that represent
natural numbers instead of enumerations (e.g., number of host channels).
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, the max_packet_count could be set to 1 << x, where x is the
number of bits available (width + 4 in the code). Since 1 << x requires
x + 1 bits to represent, this will not work. The real maximum value is
(1 << x) - 1. This value is already used the default when the set value
is invalid, but the upper limit for the set value was off-by-one.
This change makes the check the same as the one for max_transfer_size,
which was already correct.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A generic set of FIFOSIZE_* constants is defined which applies to all
fifo size and offset registers. It is already used for both the
GNPTXFSIZ and HPTXFSIZ registers, but it applies to DPTXFSIZN as well.
Some of these also had specific constants defined. This patch removes
the specific constants and documents to use the generic constants.
Note that the removed constants weren't actually used. Instead, most of
the related code uses hardcoded masks and shifts. But given that
subsequent patches will be moving that code around and introducing the
constants in the process, this patch leaves those untouched.
Also note that the GRXFSIZ register also contains a fifo size, but
there is no corresponding start address register (it is always the first
fifo in memory), the layout of the GRXFSIZ register is different and
cannot use the same constants.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 3d7b46cd20 (ip_tunnel: push generic protocol handling to
ip_tunnel module.), an Oops is triggered when an xfrm policy is configured on
an IPv4 over IPv4 tunnel.
xfrm4_policy_check() calls __xfrm_policy_check2(), which uses skb_dst(skb). But
this field is NULL because iptunnel_pull_header() calls skb_dst_drop(skb).
Signed-off-by: Li Hongjun <hongjun.li@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The slave_config is not initialized, so some of its fields may
be set with random data which may causes the failure in the following
dmaengine_prep_slave_sg().
This patch fixes this issue.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modify the probe routine to get the port line number
from device tree if the 'of_node' is populated in the
platform device. The driver can be built as module,
thus add an OF specific module device table as well
to support module auto loading.
This makes it possible to use the driver for AR9330
UART devices specified in device tree.
Cc: devicetree@vger.kernel.org
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Should a connect fail, if the publication/server is unavailable or
due to some other error, a positive value will be returned and errno
is never set. If the application code checks for an explicit zero
return from connect (success) or a negative return (failure), it
will not catch the error and subsequent send() calls will fail as
shown from the strace snippet below.
socket(0x1e /* PF_??? */, SOCK_SEQPACKET, 0) = 3
connect(3, {sa_family=0x1e /* AF_??? */, sa_data="\2\1\322\4\0\0\322\4\0\0\0\0\0\0"}, 16) = 111
sendto(3, "test", 4, 0, NULL, 0) = -1 EPIPE (Broken pipe)
The reason for this behaviour is that TIPC wrongly inverts error
codes set in sk_err.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 90ba9b19 (tcp: tcp_make_synack() can use alloc_skb()), Eric changed
the call to sock_wmalloc in tcp_make_synack to alloc_skb. In doing so,
the netfilter owner match lost its ability to block the SYNACK packet on
outbound listening sockets. Revert the change, restoring the owner match
functionality.
This closes netfilter bugzilla #847.
Signed-off-by: Phil Oester <kernel@linuxace.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we would still potentially suffer multicast packet loss if there
is just either an IGMP or an MLD querier: For the former case, we would
possibly drop IPv6 multicast packets, for the latter IPv4 ones. This is
because we are currently assuming that if either an IGMP or MLD querier
is present that the other one is present, too.
This patch makes the behaviour and fix added in
"bridge: disable snooping if there is no querier" (b00589af3b)
to also work if there is either just an IGMP or an MLD querier on the
link: It refines the deactivation of the snooping to be protocol
specific by using separate timers for the snooped IGMP and MLD queries
as well as separate timers for our internal IGMP and MLD queriers.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the SERIAL_AR933X Kconfig option from
'bool' to 'tristate' in order to allow to build
the driver as a module. Also extend the help text
of the option to reflect that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
h8300 does not support PARPORT_PC.
The related error (with allmodconfig for h8300):
CC [M] drivers/parport/parport_pc.o
drivers/parport/parport_pc.c:67:25: fatal error: asm/parport.h: No such file or directory
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If st_kim_start() fails registered protocols should be removed. This is
done by calling st_reg_complete(), which as comment states is called
with spin lock held. But in st_register() when st_kim_start fails it
is called without holding spin lock, creating possibility of concurrent
access to st_gdata data members.
Hold spin lock while calling st_reg_complete if st_kim_start() fails.
Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@globallogic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current code would attempt to negotiate a different protocol version if
the current negotiation timed out. This triggers an assert in the host (on debug
builds). Avoid this by negotiating a newer version only if the host properly
rejects the current version being negotiated.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Got the following oops just before reboot:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
[<8028d300>] (__list_del_entry+0x44/0xac)
[<802e3320>] (__fw_load_abort.part.13+0x1c/0x50)
[<802e337c>] (fw_shutdown_notify+0x28/0x50)
[<80034f80>] (notifier_call_chain.isra.1+0x5c/0x9c)
[<800350ec>] (__blocking_notifier_call_chain+0x44/0x58)
[<80035114>] (blocking_notifier_call_chain+0x14/0x18)
[<80035d64>] (kernel_restart_prepare+0x14/0x38)
[<80035d94>] (kernel_restart+0xc/0x50)
The following race condition triggers here:
_request_firmware_load()
device_create_file(...)
kobject_uevent(...)
(schedule)
(resume)
firmware_loading_store(1)
firmware_loading_store(0)
list_del_init(&buf->pending_list)
(schedule)
(resume)
list_add(&buf->pending_list, &pending_fw_head);
wait_for_completion(&buf->completion);
causing an oops later when walking pending_list after the firmware has
been released.
The proposed fix is to move the list_add() before sysfs attribute
creation.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Acked-by: Ming Lei <ming.lei@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In usb_reset_and_verify_device(), hub_port_init() allocates a new bos
descriptor to hold the value read by the device. The new bos descriptor
has to be compared with the old one in order to figure out if device 's
firmware has changed in which case the device has to be reenumerated.
In the original code, none of the two descriptors was deallocated leading
to memory leaks.
This patch compares the old bos descriptor with the new one to detect change
in firmware and releases the newly allocated bos descriptor to prevent memory
leak.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reported-by: Martin MOKREJS <mmokrejs@gmail.com>
Tested-by: Martin MOKREJS <mmokrejs@gmail.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the ehci statictics information output in ehci_stop()
because they do not provide interesting info. At any case, the current
statistics can be viewed by reading the 'registers' file in debugfs.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the duplicate of debug_async_open() prototype following
three lines below the debug_async_open() declaration.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The debugging code for ehci is enabled to run if the DEBUG flag is defined.
This patch enables the debugging code also when the kernel is configured
with dynamic debugging on.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes ehci_vdbg debugging statements from EHCI host controller
driver because they produce too much information, lowering the signal to noise
ratio when debugging, and because they are not used anymore.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
many of the macros defined in Version.h are not being used,
so we can remove the file.
Signed-off-by: navin patidar <navinp@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"keyid" is used as an offset into the ->dot11DefKey[] array. The array
has 4 elements.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a copy and paste bug here so we copy 4 bytes instead of 3.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Obviously it's impossible for ->KeyLength to be both 5 and 13. I assume
that && was intended here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These should be "<" instead of "<=". Also we can use the ARRAY_SIZE()
macro.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The result from crystalhd_get_sgle_paddr and crystalhd_get_sgle_len are later
used in calculations, so the result should be in CPU byte ordering.
Signed-off-by: Shaun Laing <shaun@xresource.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 0-DAY kernel build testing backend reports the following compiler
warnings not shown on my compiler version/options:
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c: In function 'rtw_mp_efuse_get':
>> drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:5836:65: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations]
sprintf(extra, "%s%02X ", extra, pEfuseHal->fakeEfuseInitMap[i+j]);
^
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:5830:3: note: containing loop
for (i = 0; i < EFUSE_MAP_SIZE; i += 16) {
^
>> drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:6042:69: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations]
sprintf(extra, "%s %02X", extra, pEfuseHal->fakeEfuseModifiedMap[i+j]);
^
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:6036:3: note: containing loop
for (i = 0; i < EFUSE_MAP_SIZE; i += 16) {
^
The problem is due to improper settings for some of the EFUSE_XXX defines such that
EFUSE_MAP_SIZE was larger than the sizes of the marked arrays. Thanks to
Fengguang Wu for helping me understand the root cause.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/dgap/dgap_driver.c: In function ‘dgap_cleanup_module’:
drivers/staging/dgap/dgap_driver.c:423: error: implicit declaration of function ‘kfree’
drivers/staging/dgap/dgap_driver.c: In function ‘dgap_driver_kzmalloc’:
drivers/staging/dgap/dgap_driver.c:940: error: implicit declaration of function ‘kmalloc’
drivers/staging/dgap/dgap_driver.c:940: warning: initialization makes pointer from integer without a cast
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patchs adds a TODO for the driver.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a build error that occurs when CONFIG_PM is enabled
and CONFIG_PM_SLEEP isn't:
>> drivers/usb/host/ohci-pci.c:294:10: error: 'usb_hcd_pci_pm_ops' undeclared here (not in a function)
.pm = &usb_hcd_pci_pm_ops
Since the usb_hcd_pci_pm_ops structure is defined and used when
CONFIG_PM is enabled, its declaration should not be protected by
CONFIG_PM_SLEEP.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &of->dev,
so we can directly pass a struct platform_device.
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &of->dev,
so we can directly pass a struct platform_device.
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gadget strings table should be null terminated.
usb_gadget_get_string() loops through the table
expecting a null at the end of the list.
Signed-off-by: Graham Williams <gwilli@broadcom.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lp872x regulator driver can be built a module after commit 631a1fc
"regulator: build: Allow most regulators to be built as modules".
Make REGULATOR_LP872X depend on I2C to allow building lp872x module when I2C=m.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Below is the equation in original code:
tps65217_uv1_ranges:
0 ... 24: uV = vsel * 25000 + 900000;
25 ... 52: uV = (vsel - 24) * 50000 + 1500000;
= (vsel - 25) * 50000 + 1550000;
53 ... 55: uV = (vsel - 52) * 100000 + 2900000;
= (vsel - 53) * 100000 + 3000000;
56 ... 62: uV = 3300000;
tps65217_uv2_ranges:
0 ... 8: uV = vsel * 50000 + 1500000;
9 ... 13: uV = (vsel - 8) * 100000 + 1900000;
= (vsel - 9) * 100000 + 2000000;
14 ... 31: uV = (vsel - 13) * 50000 + 2400000;
= (vsel - 14) * 50000 + 2450000;
The voltage tables are composed of linear ranges.
This patch converts this driver to use multiple linear ranges APIs.
In original code, voltage range for DCDC1 is 900000 ~ 1800000 and voltage range
for DCDC3 is 900000 ~ 1500000. This patch separates the range 25~52 in
tps65217_uv1_ranges table to two linear ranges: 25~30 and 31~52.
This change makes it possible to reuse the same linear_ranges table for DCDCx.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Matthijs Kooijman