Commit Graph

445 Commits

Author SHA1 Message Date
Linus Torvalds 48476df998 Fairly unexciting MTD merge for 3.9:
* misc clean-ups in the MTD command-line partitioning parser (cmdlinepart)
  * add flash locking support for STmicro chips serial flash chips, as well as
    for CFI command set 2 chips.
  * new driver for the ELM error correction HW module found in various TI chips,
    enable the OMAP NAND driver to use the ELM HW error correction
  * added number of new serial flash IDs
  * various fixes and improvements in the gpmi NAND driver
  * bcm47xx NAND driver improvements
  * make the mtdpart module actually removable
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iEYEABECAAYFAlExEs8ACgkQdwG7hYl686Oa+gCgiBNt+I0MiixDeN+MGuE1uw9s
 i2wAniD9sR2HDy6y5SkbdXK/aPr8ez/p
 =xV1l
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd

Pull MTD update from David Woodhouse:
 "Fairly unexciting MTD merge for 3.9:

   - misc clean-ups in the MTD command-line partitioning parser
     (cmdlinepart)
   - add flash locking support for STmicro chips serial flash chips, as
     well as for CFI command set 2 chips.
   - new driver for the ELM error correction HW module found in various
     TI chips, enable the OMAP NAND driver to use the ELM HW error
     correction
   - added number of new serial flash IDs
   - various fixes and improvements in the gpmi NAND driver
   - bcm47xx NAND driver improvements
   - make the mtdpart module actually removable"

* tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits)
  mtd: map: BUG() in non handled cases
  mtd: bcm47xxnflash: use pr_fmt for module prefix in messages
  mtd: davinci_nand: Use managed resources
  mtd: mtd_torturetest can cause stack overflows
  mtd: physmap_of: Convert device allocation to managed devm_kzalloc()
  mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement.
  mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional.
  mtd: atmel_nand: avoid to report an error when lookup table offset is 0.
  mtd: bcm47xxsflash: adjust names of bus-specific functions
  mtd: bcm47xxpart: improve probing of nvram partition
  mtd: bcm47xxpart: add support for other erase sizes
  mtd: bcm47xxnflash: register this as normal driver
  mtd: bcm47xxnflash: fix message
  mtd: bcm47xxsflash: register this as normal driver
  mtd: bcm47xxsflash: write number of written bytes
  mtd: gpmi: add sanity check for the ECC
  mtd: gpmi: set the Golois Field bit for mx6q's BCH
  mtd: devices: elm: Removes <xx> literals in elm DT node
  mtd: gpmi: fix a dereferencing freed memory error
  mtd: fix the wrong timeo for panic_nand_wait()
  ...
2013-03-02 16:33:54 -08:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Akinobu Mita aca662a3b1 mtd: rename random32() to prandom_u32()
Use more preferable function name which implies using a pseudo-random
number generator.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04 09:26:28 +02:00
Linus Torvalds 85d5b70d8a Nothing exciting, just clean-ups and nicification. Oh, and one small
optimization which makes UBI to use less RAM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ0scJAAoJECmIfjd9wqK0P5oQAKm//ubgQYE1EYhhlVcIcywc
 MdIY3bxsenoqOJlVN8KP7MFIWTG7Zxhfl72wS3RHsOaxjKj+FmJbmRjcAiEx6xoy
 0oc0v3hZ+jLVlIejdAtpQIYwtoHkM/mnuSX/T5K+GVGsVums52ItAEibTzbo2O7G
 akva1Wn7LCSqJ2i9srAJtOIx0lqanvd0M56UvRgRhW1lwENrAYmiRrzR1Ph1v6Fe
 tXjPLf97ZwblP28E0rtqizCL4IJN1+IDj9Q8DP202jOTXsCK8OyIyyDO7wDZgfy2
 JaD8y1mS4lJsCVxWRIEnX9NRkxiyFlMHMlDGmZn2QbuJU8A8Ju0NLf3FZ0CGtywT
 2mDxtFhTCovShUlNYnCiS9p1dwJR34EGXQ0ueBfejO0J2wU7PvmFmxd1kYO8dme/
 lfPZZ7nnTQSnQ/CiRujtC/T5FkSi8pHViDZ5SOyXHCYi5EJ1iQ4O/NuxcGy81AnX
 kXkTWlLoB4M6BSX7TXaQIEey/PO1KbP0WDzZDob0InWucA+zu4yWg1feafBdtcOt
 vMjfJZDPTcrTDwSb7vtSmhxMdz1TXKGHp7Lf/ePMlFthra0vcvJsbTfev/zLDeYt
 9S/KBsdFhlvHhHpKHLTl0wUfOoFqbCeR4d+tQ7R/dgMYYt6jeZ4JG3PQ1bh4Xwk/
 O3bRMTppCV2MbRarvcH7
 =mdJB
 -----END PGP SIGNATURE-----

Merge tag 'upstream-3.8-rc1' of git://git.infradead.org/linux-ubi

Pull UBI update from Artem Bityutskiy:
 "Nothing exciting, just clean-ups and nicification.  Oh, and one small
  optimization which makes UBI to use less RAM."

* tag 'upstream-3.8-rc1' of git://git.infradead.org/linux-ubi:
  UBI: embed ubi_debug_info field in ubi_device struct
  UBI: introduce helpers dbg_chk_{io, gen}
  UBI: replace memcpy with struct assignment
  UBI: remove spurious comment
  UBI: gluebi: rename misleading variables
  UBI: do not allocate the memory unnecessarily
  UBI: use list_move_tail instead of list_del/list_add_tail
2012-12-20 07:39:03 -08:00
Ezequiel Garcia eab737722e UBI: embed ubi_debug_info field in ubi_device struct
ubi_debug_info struct was dynamically allocated which
is always suboptimal, for it tends to fragment memory
and make the code error-prone.
Fix this by embedding it in ubi_device struct.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10 13:38:59 +02:00
Ezequiel Garcia 64575574f2 UBI: introduce helpers dbg_chk_{io, gen}
With this patch code is a bit more readable and there's no
generated code or functionality impact.
Furthermore, this abstracts implementation details and
will allow to change ubi_debug_info in a less invasive way.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10 13:38:59 +02:00
Richard Weinberger 894aef2157 UBI: dont call ubi_self_check_all_ff() in __wl_get_peb()
As ubi_self_check_all_ff() might sleep we are not allowed
to call it from atomic context.
For now we call it only from ubi_wl_get_peb().
There are some code paths where it would also make sense,
but these paths are currently atomic and only enabled
when fastmap is used.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-04 16:04:31 +02:00
Richard Weinberger ed4b7021cb UBI: remove PEB from free tree in get_peb_for_wl()
If UBI is built without fastmap, get_peb_for_wl() has to
remove the PEB manially from the free tree.
Otherwise the requested PEB lives in two trees.

Reported-by: Zach Sadecki <zsadecki@itwatchdogs.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-04 16:04:16 +02:00
Ezequiel Garcia d856c13c11 UBI: replace memcpy with struct assignment
This kind of memcpy() is error-prone. Its replacement with a struct
assignment is prefered because it's type-safe and much easier to read.

Found by coccinelle. Hand patched and reviewed.
Tested by compilation only.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier struct_name;
struct struct_name to;
struct struct_name from;
expression E;
@@
-memcpy(&(to), &(from), E);
+to = from;
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03 13:54:14 +02:00
Ezequiel Garcia 38f92cca8a UBI: remove spurious comment
This line of comment looks completely bogus.

It was introduced in:
commit d99383b00e
Author: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date:   Wed May 18 14:47:34 2011 +0300

    UBI: change the interface of a debugging check function

Remove it.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-30 13:54:41 +02:00
Ezequiel Garcia 41c043842f UBI: gluebi: rename misleading variables
Both names 'total_read' and 'total_written' are actually used
as the number of bytes left to read and write.
Fix this confusion by renaming both to 'bytes_left'.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-30 13:54:41 +02:00
Artem Bityutskiy d125a75342 UBI: do not allocate the memory unnecessarily
UBI reserves an LEB sized buffer for various needs. We can use this buffer
while scanning, instead of allocating another one. This patch was originally
created by Jan Luebbe <jlu@pengutronix.de>, but then he dropped it and I picked
up and tweaked a little bit.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-26 16:29:46 +03:00
Wei Yongjun 6a059abdba UBI: use list_move_tail instead of list_del/list_add_tail
Using list_move_tail() instead of list_del() + list_add_tail().

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-26 16:04:21 +03:00
Linus Torvalds e9eca4de95 This pull request contains the UBI fastmap support implemented by Richard
Weinberger from Linutronix. Fastmap is designed to address UBI's slow scanning
 issues. Namely, it introduces a new on-flash data-structure called "fastmap",
 which stores the information about logical<->physical eraseblocks mappings.
 So now to get this information just read the fastmap, instead of doing full
 scan. More information here can be found in Richard's announcement in LKML
 (Subject: UBI: Fastmap request for inclusion (v19)):
 
 http://thread.gmane.org/gmane.linux.kernel/1364922/focus=1369109
 
 One thing I want to explicitly say is that fastmap did not have large
 enough linux-next exposure. It is partially my fault - I did not respond
 quickly enough. I _really_ apologize for this. But it had good testing and
 disabled by default, so I do not expect that we'll break anything.
 
 Fastmap is declared as experimental so far, and it is off by default. We
 did declare that the on-flash format may be changed. The reason for this is
 that no one used it in real production so far, so there is a high risk that
 something is missing. Besides, we do not have user-space tools supporting
 fastmap so far.
 
 Nevertheless, I suggest we merge this feature. Many people want UBI's scanning
 bottleneck to be fixed and merging fastmap now should accelerate its production
 use. The plan is to make it bullet-prove, somewhat clean-up, and make it the
 default for UBI. I do not know how many kernel releases will it take.
 
 Basically, I what I want to do for fastmap is something like Linus did for
 btrfs few years ago.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQcrPrAAoJECmIfjd9wqK0gjYQAJICGYdYBO2wXQKojN+c518j
 dhZxSFBmn6VAVaLoiRJudbzVLiJXtEOupldnmfFqcBbM2I3KujkiVAb8kH99NNxH
 orfbSXmi6fvLZd1FWKm6EETl1CwWeOvQHcewLtGEdlhMqjNxo9QwZSxDNEARwBK8
 rCchMnR7QgnmKZQActxg/PfdKHmFgZf9mj/IkcLXvYhV3MimBeRjA+gKwJHQ4R7g
 +LWm2wkqEFpDqbtRIrJGsXkaX4f4oVK+KqTvOudsSMc5VD6R+xVjFux7MFz9DOYZ
 copqR/3Ep0O+xeVgUm6it/rGubdU/ejr0T5kF/EEmDe2ktn8/7eGDh4VMx+4AyES
 Vf18rD9Wc8eEcImcm/yxVY6FQRQjKT2tRF2TEarrhLAxXREsiYzLghRUuspgIcJG
 hqQsNqJyDvV/YNBZIqVyA7sx0TDaP/8CwNYy7NiVYtxsVeo9QyzWer0aaHjmIeBL
 AyEn5/2m7FVPL3acoLN4jAwyMNuDnQ3iuNqIhm2drm2brrxAcYUmWg/mXORlZpKM
 Q8ts0h4++sTWgwuOEM/iCfoHagxJc3cQMsE6C1Z7LdLsNFHAPdnKSSkkjXK54jqx
 wq1yapCkNDqzwWU4xjWsr7QaMLb69KPltx4Iw4wBE+8lW4WjqRdFhBs/+f3zceBe
 SaSUuYkTFij+Ol+XWJnL
 =/Sqc
 -----END PGP SIGNATURE-----

Merge tag 'upstream-3.7-rc1-fastmap' of git://git.infradead.org/linux-ubi

Pull UBI fastmap changes from Artem Bityutskiy:
 "This pull request contains the UBI fastmap support implemented by
  Richard Weinberger from Linutronix.  Fastmap is designed to address
  UBI's slow scanning issues.  Namely, it introduces a new on-flash
  data-structure called "fastmap", which stores the information about
  logical<->physical eraseblocks mappings.  So now to get this
  information just read the fastmap, instead of doing full scan.  More
  information here can be found in Richard's announcement in LKML
  (Subject: UBI: Fastmap request for inclusion (v19)):

     http://thread.gmane.org/gmane.linux.kernel/1364922/focus=1369109

  One thing I want to explicitly say is that fastmap did not have large
  enough linux-next exposure.  It is partially my fault - I did not
  respond quickly enough.  I _really_ apologize for this.  But it had
  good testing and disabled by default, so I do not expect that we'll
  break anything.

  Fastmap is declared as experimental so far, and it is off by default.
  We did declare that the on-flash format may be changed.  The reason
  for this is that no one used it in real production so far, so there is
  a high risk that something is missing.  Besides, we do not have
  user-space tools supporting fastmap so far.

  Nevertheless, I suggest we merge this feature.  Many people want UBI's
  scanning bottleneck to be fixed and merging fastmap now should
  accelerate its production use.  The plan is to make it bullet-prove,
  somewhat clean-up, and make it the default for UBI.  I do not know how
  many kernel releases will it take.

  Basically, I what I want to do for fastmap is something like Linus did
  for btrfs few years ago."

* tag 'upstream-3.7-rc1-fastmap' of git://git.infradead.org/linux-ubi:
  UBI: Wire-up fastmap
  UBI: Add fastmap core
  UBI: Add fastmap support to the WL sub-system
  UBI: Add fastmap stuff to attach.c
  UBI: Wire-up ->fm_sem
  UBI: Add fastmap bits to build.c
  UBI: Add self_check_eba()
  UBI: Export next_sqnum()
  UBI: Add fastmap stuff to ubi.h
  UBI: Add fastmap on-flash data structures
2012-10-08 20:40:45 +09:00
Richard Weinberger 76ac66e469 UBI: Wire-up fastmap
Make fastmap known to Kconfig, UBI Makefile and MAINTAINERS.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03 16:39:37 +03:00
Richard Weinberger dbb7d2a88d UBI: Add fastmap core
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03 16:39:27 +03:00
Richard Weinberger 8199b901a3 UBI: Add fastmap support to the WL sub-system
To make fastmap possible the WL sub-system needs some
changes.
Mostly to support fastmaps pools.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03 12:29:38 +03:00
Richard Weinberger dac6e2087a UBI: Add fastmap stuff to attach.c
- Export compare_lebs() as fastmap needs this function.
- Implement fastmap scan logic.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03 12:29:38 +03:00
Richard Weinberger 8974b15c6e UBI: Wire-up ->fm_sem
Fastmap uses ->fm_sem to stop EBA changes while writing
a new fastmap.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03 12:29:37 +03:00
Richard Weinberger 77e6c2f04d UBI: Add fastmap bits to build.c
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03 12:29:37 +03:00
Richard Weinberger 00abf30415 UBI: Add self_check_eba()
self_check_eba() compares two ubi_attach_info objects.
Fastmap uses this function for self checks.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03 12:29:37 +03:00
Richard Weinberger a730665370 UBI: Export next_sqnum()
Fastmap needs next_sqnum(), rename it to ubi_next_sqnum()
and make it non-static.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03 12:29:37 +03:00
Richard Weinberger 5638b33abf UBI: Add fastmap stuff to ubi.h
This patch adds fastmap specific data structures to ubi.h.
It moves also struct ubi_work to ubi.h as it is now needed
for more than one c file.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03 12:29:37 +03:00
Richard Weinberger 1c86574999 UBI: Add fastmap on-flash data structures
Add the on-flash data structures neeed by fastmap
to ubi-media.h

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03 12:29:37 +03:00
Linus Torvalds 65b99c74fd The main change is the way we reserve eraseblocks for bad blocks
handling. We used to reserve 2% of the partition, but now we are
 more aggressive and we reserve 2% of the entire chip, which is
 what actually manufacturers specify in data sheets. We introduced
 an option to users to override the default, though.
 
 There are a couple of fixes as well, and a number of cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQauyXAAoJECmIfjd9wqK0hLAQAL1tv4BwLUi8NlUristmO7GY
 qb4LvfadhYldapXQ/kw9g7DjDQduuerBaIGh7oglRG2HFtNrMD/03umTwb0P4li4
 gB/YJxRlU2TdPxn6tmvldGyLUVd8DjGZBvF0l9Mzuc0pGz95UCGcWhwysTFtyxVg
 AmKrW55jqSImzH0L2UkVNepV4h3vXivOLlM/SFP1bgAcVfKlj8THnNgO6cAKGuV8
 q2qzWmFOakiMFzxgjpfx6QtcmyOUTSgKD+jBEmsUGbCmQmOdXpyXKwP2UugoCltF
 j+MwwOsLD0J8WG6j4NPlzbPBSg8zJD2O6MQa0dCy+WG8ho0BloMfjLFv2qavcLYX
 dSrWn4Df/mIuAjNqcrgC46nnnrHDQcNzqlfsD/f1tsnDvtLZ6CzEthAqPBBCU8Uq
 TaF3kEKwq02JkZFAfkPEVkaFTkgBpa27EdRS+KzsRBIhsMSySC9tJOvl5QIRi9Ad
 bnsgXIYZUzi36CGzUHGLeCMw6APC/smBqP/o2zQGpX0DA/WOmRgIuclpap8XSt+h
 tBL4v785w8CzOCPSRRagr06wxDdu9vhd4GsTrg7dIIFrZnA0pZWWgSV8xlcjrWt9
 VPw/DLvRPIV/b0BzNcA1gfDvo4GLwuY7eQRdBjYjLByKHJDXouH1p1CZcDJvQtio
 qbSA1x8NNKvIy1D8gawd
 =95SE
 -----END PGP SIGNATURE-----

Merge tag 'upstream-3.7-rc1' of git://git.infradead.org/linux-ubi

Pull UBI changes from Artem Bityutskiy:
 "The main change is the way we reserve eraseblocks for bad blocks
  handling.  We used to reserve 2% of the partition, but now we are more
  aggressive and we reserve 2% of the entire chip, which is what
  actually manufacturers specify in data sheets.  We introduced an
  option to users to override the default, though.

  There are a couple of fixes as well, and a number of cleanups."

* tag 'upstream-3.7-rc1' of git://git.infradead.org/linux-ubi: (24 commits)
  UBI: fix trivial typo 'it' => 'is'
  UBI: load after mtd device drivers
  UBI: print less
  UBI: use pr_ helper instead of printk
  UBI: comply with coding style
  UBI: erase free PEB with bitflip in EC header
  UBI: fix autoresize handling in R/O mode
  UBI: add max_beb_per1024 to attach ioctl
  UBI: allow specifying bad PEBs limit using module parameter
  UBI: check max_beb_per1024 value in ubi_attach_mtd_dev
  UBI: prepare for max_beb_per1024 module parameter addition
  UBI: introduce MTD_PARAM_MAX_COUNT
  UBI: separate bad_peb_limit in a function
  arm: sam9_l9260_defconfig: correct CONFIG_MTD_UBI_BEB_LIMIT
  UBI: use the whole MTD device size to get bad_peb_limit
  mtd: mtdparts: introduce mtd_get_device_size
  mtd: mark mtd_is_partition argument as constant
  arm: sam9_l9260_defconfig: remove non-existing config option
  UBI: kill CONFIG_MTD_UBI_BEB_RESERVE
  UBI: limit amount of reserved eraseblocks for bad PEB handling
  ...
2012-10-02 20:49:15 -07:00
Brian Norris 55393ba1bd UBI: fix trivial typo 'it' => 'is'
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-26 13:22:50 +03:00
Jiang Lu cf38aca520 UBI: load after mtd device drivers
Use 'late_initcall()' in UBI to make sure it initializes after MTD drivers.

Signed-off-by: Jiang Lu <lu.jiang@windriver.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-26 13:22:44 +03:00
Artem Bityutskiy 78b495c39a UBI: fix a horrible memory deallocation bug
UBI was mistakingly using 'kfree()' instead of 'kmem_cache_free()' when
freeing "attach eraseblock" structures in vtbl.c. Thankfully, this happened
only when we were doing auto-format, so many systems were unaffected. However,
there are still many users affected.

It is strange, but the system did not crash and nothing bad happened when
the SLUB memory allocator was used. However, in case of SLOB we observed an
crash right away.

This problem was introduced in 2.6.39 by commit
"6c1e875 UBI: add slab cache for ubi_scan_leb objects"

A note for stable trees:
  Because variable were renamed, this won't cleanly apply to older kernels.
  Changing names like this should help:
	1. ai -> si
	2. aeb_slab_cache -> seb_slab_cache
	3. new_aeb -> new_seb

Reported-by: Richard Genoud <richard.genoud@gmail.com>
Tested-by: Richard Genoud <richard.genoud@gmail.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: stable@vger.kernel.org [v2.6.39+]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:40:26 +03:00
Artem Bityutskiy 719bb84017 UBI: print less
UBI currently prints a lot of information when it mounts a volume, which
bothers some people. Make it less chatty - print only important information
by default.

Get rid of 'dbg_msg()' macro completely.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:02 +03:00
Artem Bityutskiy e28453bbb7 UBI: use pr_ helper instead of printk
Use 'pr_err()' instead of 'printk(KERN_ERR', etc.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:02 +03:00
Artem Bityutskiy 049333cecb UBI: comply with coding style
Join all the split printk lines in order to stop checkpatch complaining.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:01 +03:00
Matthieu CASTET 193819cf2e UBI: erase free PEB with bitflip in EC header
Without this patch, these PEB are not scrubbed until we put data in them.
Bitflip can accumulate latter and we can loose the EC header (but VID header
should be intact and allow to recover data).

Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com>
Cc: stable@vger.kernel.org
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:01 +03:00
Artem Bityutskiy abb3e01103 UBI: fix autoresize handling in R/O mode
Currently UBI fails in autoresize when it is in R/O mode (e.g., because the
underlying MTD device is R/O). This patch fixes the issue - we just skip
autoresize and print a warning.

Reported-by: Pali Rohár <pali.rohar@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:01 +03:00
Richard Genoud db7e21c21f UBI: add max_beb_per1024 to attach ioctl
This patch provides a possibility to set the "maximum expected number of
bad blocks per 1024 blocks" (max_beb_per1024) for each mtd device using
the UBI_IOCATT ioctl.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:01 +03:00
Richard Genoud edac493dfb UBI: allow specifying bad PEBs limit using module parameter
This patch provides the possibility to adjust the "maximum expected number of
bad blocks per 1024 blocks" (max_beb_per1024) for each mtd device.

The majority of NAND devices have their max_beb_per1024 equal to 20, but
sometimes it's more.
Now, we can adjust that via a kernel parameter:
ubi.mtd=<name|num|path>[,<vid_hdr_offs>[,max_beb_per1024]]

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:01 +03:00
Richard Genoud d2f588f934 UBI: check max_beb_per1024 value in ubi_attach_mtd_dev
max_beb_per1024 shouldn't be negative, and a 0 value will be treated as
the default value. For the upper bound, 768/1024 should be enough.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:01 +03:00
Richard Genoud 256334c319 UBI: prepare for max_beb_per1024 module parameter addition
This patch prepare the way for the addition of max_beb_per1024 module
parameter.  There's no functional change.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:01 +03:00
Richard Genoud 5993f9b738 UBI: introduce MTD_PARAM_MAX_COUNT
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:01 +03:00
Richard Genoud 95e6fb027e UBI: separate bad_peb_limit in a function
No functional changes here, just to prepare for next patch.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:00 +03:00
Richard Genoud ba4087e956 UBI: use the whole MTD device size to get bad_peb_limit
On NAND flash devices, UBI reserves some physical erase blocks (PEB) for
bad block handling. Today, the number of reserved PEB can only be set as a
percentage of the total number of PEB in each MTD partition. For example, for a
NAND flash with 128KiB PEB, 2 MTD partition of 20MiB (mtd0) and 100MiB (mtd1)
and 2% reserved PEB:
 - the UBI device on mtd0 will have 2 PEB reserved
 - the UBI device on mtd1 will have 16 PEB reserved

The problem with this behaviour is that NAND flash manufacturers give a
minimum number of valid block (NVB) during the endurance life of the
device, e.g.:

Parameter             Symbol    Min    Max    Unit      Notes
--------------------------------------------------------------
Valid block number     NVB     1004    1024   Blocks     1

From this number we can deduce the maximum number of bad PEB that a device will
contain during its endurance life: a 128MiB NAND flash (1024 PEB) will not have
less than 20 bad blocks during the flash endurance life.

But the manufacturer doesn't tell where those bad block will appear. He doesn't
say either if they will be equally disposed on the whole device (and I'm pretty
sure they won't). So, according to the datasheets, we should reserve the
maximum number of bad PEB for each UBI device (worst case scenario: 20 bad
blocks appears on the smallest MTD partition).

So this patch make UBI use the whole MTD device size to calculate the maximum
bad expected eraseblocks.

The Kconfig option is in per1024 blocks, thus it can have a default value of 20
which is *very* common for NAND devices.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:39:00 +03:00
Shmulik Ladkani 1b2a579061 UBI: kill CONFIG_MTD_UBI_BEB_RESERVE
CONFIG_MTD_UBI_BEB_RESERVE and MIN_RESEVED_PEBS are no longer used,
since the amount of reserved eraseblocks for bad PEB handling is now
derived from 'ubi->bad_peb_limit' (ubi's maximum expected bad
eraseblocks).

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-09-04 09:38:58 +03:00
Shmulik Ladkani 37f758a036 UBI: limit amount of reserved eraseblocks for bad PEB handling
The existing mechanism of reserving PEBs for bad PEB handling has two
flaws:
- It is calculated as a percentage of good PEBs instead of total PEBs.
- There's no limit on the amount of PEBs UBI reserves for future bad
  eraseblock handling.

This patch changes the mechanism to overcome these flaws.

The desired level of PEBs reserved for bad PEB handling (beb_rsvd_level)
is set to the maximum expected bad eraseblocks (bad_peb_limit) minus the
existing number of bad eraseblocks (bad_peb_count).

The actual amount of PEBs reserved for bad PEB handling is usually set
to the desired level (but in some circumstances may be lower than the
desired level, e.g. when attaching to a device that has too few
available PEBs to satisfy the desired level).

In the case where the device has too many bad PEBs (above the expected
limit), then the desired level, and the actual amount of PEBs reserved
are set to zero. No PEBs will be set aside for future bad eraseblock
handling - even if some PEBs are made available (e.g. by shrinking a
volume).
If another PEB goes bad, and there are available PEBs, then the
eraseblock will be marked bad (consuming one available PEB). But if
there are no available PEBs, ubi will go into readonly mode.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
2012-09-04 09:38:58 +03:00
Shmulik Ladkani 8beeb3bb9d UBI: introduce new bad PEB limit
Introduce 'ubi->bad_peb_limit', which specifies an upper limit of PEBs
UBI expects to go bad.  Currently, it is initialized to a fixed percentage
of total PEBs in the UBI device (configurable via CONFIG_MTD_UBI_BEB_LIMIT).

The 'bad_peb_limit' is intended to be used for calculating the amount of PEBs
UBI needs to reserve for bad eraseblock handling.

Artem: minor amendments.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-09-04 09:38:58 +03:00
Artem Bityutskiy 183ae6cf8b UBI: print PID in debug messages
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:38:57 +03:00
Artem Bityutskiy 5739dd7213 UBI: print image sequence number as unsigned integer
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04 09:38:57 +03:00
Shmulik Ladkani 87e773c95e UBI: harmonize the update of ubi->beb_rsvd_pebs
Currently, there are several locations where an attempt to reserve more
PEBs for bad PEB handling is made, with the same code being duplicated.

Harmonize it by introducing 'ubi_update_reserved()'.

Also, improve the debug message issued, making it more descriptive.

Artem: amended the patch a little.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-07-18 14:30:34 +03:00
Shmulik Ladkani 5c669a5bd8 UBI: trivial: fix comment of ubi_calculate_reserved function
The function name within the comment was not aligned with the actual
function name.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-07-18 13:33:03 +03:00
Peter Meerwald 2ce7be1b77 UBI: fix spelling of detach in debug output
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-07-18 10:13:41 +03:00
Richard Genoud 54de1f1c44 UBI: Change the default percentage of reserved PEB
The actual value (1%) is too low for actual NAND devices, a huge
majority of device has 2% maximum bad blocks (SLC or MLC).
(Actually it's 20 blocks on a 1024 blocks device, 40/2048...)

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
2012-07-18 10:13:41 +03:00
Brian Norris 903e0e4ef9 UBI: correct usage of IS_ENABLED()
Commit "e9b4cf2 UBI: fix debugfs-less systems support" fixed one
regression but introduced a different regression - the debugfs is now always
compiled out. Root cause: IS_ENABLED() arguments should be used with the
CONFIG_* prefix.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-06-27 14:22:15 +03:00