Since commit ebd457d559 ("iio: light: vcnl4000 add devicetree hooks")
the of_match_table is supported but the data shouldn't be a string.
Instead it shall be one of 'enum vcnl4000_device_ids'. Also the matching
logic for the vcnl4020 was wrong. Since the data retrieve mechanism is
still based on the i2c_device_id no failures did appeared till now.
Fixes: ebd457d559 ("iio: light: vcnl4000 add devicetree hooks")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Angus Ainslie (Purism) angus@akkea.ca
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
i2c controller available in st_lsm6dsx series performs i2c slave
configuration using accel clock as trigger.
st_lsm6dsx_shub_wait_complete routine is used to wait the controller has
carried out the requested configuration. However if the accel sensor is not
enabled we should not use its configured odr to estimate a proper timeout
Fixes: c91c1c844e ("iio: imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since commit 9bcf15f75c ("iio: adc: axp288: Fix TS-pin handling") we
preserve the bias current set by the firmware at boot. This fixes issues
we were seeing on various models, but it seems our old hardcoded 80ųA bias
current was working around a firmware bug on at least one model laptop.
In order to both have our cake and eat it, this commit adds a dmi based
list of models where we need to override the firmware set bias current and
adds the one model we now know needs this to it: The Lenovo Ideapad 100S
(11 inch version).
Fixes: 9bcf15f75c ("iio: adc: axp288: Fix TS-pin handling")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203829
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In adis_update_scan_mode_burst, if adis->buffer allocation fails release
the adis->xfer.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In adis_update_scan_mode, if allocation for adis->buffer fails,
previously allocated adis->xfer needs to be released.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
End of conversion may be handled by using IRQ or DMA. There may be a
race when two conversions complete at the same time on several ADCs.
EOC can be read as 'set' for several ADCs, with:
- an ADC configured to use IRQs. EOCIE bit is set. The handler is normally
called in this case.
- an ADC configured to use DMA. EOCIE bit isn't set. EOC triggers the DMA
request instead. It's then automatically cleared by DMA read. But the
handler gets called due to status bit is temporarily set (IRQ triggered
by the other ADC).
So both EOC status bit in CSR and EOCIE control bit must be checked
before invoking the interrupt handler (e.g. call ISR only for
IRQ-enabled ADCs).
Fixes: 2763ea0585 ("iio: adc: stm32: add optional dma support")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move STM32 ADC registers definitions to common header.
This is precursor patch to:
- iio: adc: stm32-adc: fix a race when using several adcs with dma and irq
It keeps registers definitions as a whole block, to ease readability and
allow simple access path to EOC bits (readl) in stm32-adc-core driver.
Fixes: 2763ea0585 ("iio: adc: stm32: add optional dma support")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We need to perform a reset a start up to make sure that the chip is in a
consistent state. This reset also disables all the interrupts which
should only be enabled together with the iio buffer. Not doing this, was
sometimes causing unwanted interrupts to trigger.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Fixes: f4f55ce38e ("iio:adxl372: Add FIFO and interrupts support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One in two sample sets was lost by multiplying fifo_set_size with
sizeof(u16). Also, the double number of available samples were pushed to
the iio buffers.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Fixes: f4f55ce38e ("iio:adxl372: Add FIFO and interrupts support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Currently, the driver sets the FIFO_SAMPLES register with the number of
sample sets (maximum of 170 for 3 axis data, 256 for 2-axis and 512 for
single axis). However, the FIFO_SAMPLES register should store the number
of samples, regardless of how the FIFO format is configured.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Fixes: f4f55ce38e ("iio:adxl372: Add FIFO and interrupts support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix bug in sampling function hx711_cycle() when interrupt occures while
PD_SCK is high. If PD_SCK is high for at least 60 us power down mode of
the sensor is entered which in turn leads to a wrong measurement.
Switch off interrupts during a PD_SCK high period and move query of DOUT
to the latest point of time which is at the end of PD_SCK low period.
This bug exists in the driver since it's initial addition. The more
interrupts on the system the higher is the probability that it happens.
Fixes: c3b2fdd0ea ("iio: adc: hx711: Add IIO driver for AVIA HX711")
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Various minor bug fixes posted in the last couple of weeks:
- Various missed memory frees and error unwind bugs
- Fix regressions in a few iwarp drivers from 5.4 patches
- A few regressions added in past kernels
- Squash a number of races in mlx5 ODP code
-----BEGIN PGP SIGNATURE-----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=sgve
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"The usual collection of driver bug fixes, and a few regressions from
the merge window. Nothing particularly worrisome.
- Various missed memory frees and error unwind bugs
- Fix regressions in a few iwarp drivers from 5.4 patches
- A few regressions added in past kernels
- Squash a number of races in mlx5 ODP code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Add missing synchronize_srcu() for MW cases
RDMA/mlx5: Put live in the correct place for ODP MRs
RDMA/mlx5: Order num_pending_prefetch properly with synchronize_srcu
RDMA/odp: Lift umem_mutex out of ib_umem_odp_unmap_dma_pages()
RDMA/mlx5: Fix a race with mlx5_ib_update_xlt on an implicit MR
RDMA/mlx5: Do not allow rereg of a ODP MR
IB/core: Fix wrong iterating on ports
RDMA/nldev: Reshuffle the code to avoid need to rebind QP in error path
RDMA/cxgb4: Do not dma memory off of the stack
RDMA/cm: Fix memory leak in cm_add/remove_one
RDMA/core: Fix an error handling path in 'res_get_common_doit()'
RDMA/i40iw: Associate ibdev to netdev before IB device registration
RDMA/iwcm: Fix a lock inversion issue
RDMA/iw_cxgb4: fix SRQ access from dump_qp()
RDMA/hfi1: Prevent memory leak in sdma_init
RDMA/core: Fix use after free and refcnt leak on ndev in_device in iwarp_query_port
RDMA/siw: Fix serialization issue in write_space()
RDMA/vmw_pvrdma: Free SRQ only once
cleanup error handling code and make sure temporary info array
with the handles are freed by amdgpu_bo_list_put() on
idr_replace()'s failure.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Numerous fixes to the compat vDSO build system, especially when
combining gcc and clang
- Fix parsing of PAR_EL1 in spurious kernel fault detection
- Partial workaround for Neoverse-N1 erratum #1542419
- Fix IRQ priority masking on entry from compat syscalls
- Fix advertisment of FRINT HWCAP to userspace
- Attempt to workaround inlining breakage with '__always_inline'
- Fix accidental freeing of parent SVE state on fork() error path
- Add some missing NULL pointer checks in instruction emulation init
- Some formatting and comment fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl2dv4cQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNO6UB/4yY3lYR6C++7EdVwYxQRXf8VX9ukeO76gp
P/AS6Kt8+AiOuhFJJXDj3D7K/KqgZnJEhzeWHTZluYpIBuzFerW+RxzmExL+wFWf
ISZgdh7roFCQx3Nt+iBs/bAMPvk5Da1KHvSw/yZ6P8mj6fK8sVUh/O8+KK4kSzfT
muDoSO6WHSonAEOYm9ryn1q1pM5DsCjr+9fm7d9L+dJAUP2xX44ymlIY+v6yD3Or
IWJMYaWKb4TbdTJSy2VbUSM0fzByGBJCx1wOTd4gV6uDbB4GA6h+E/DMB1qnvv9W
nH5c4qwVgYhp7prpescMxYZoV/I9damvfnaIjqh9jc3H3milEqcn
=GwLJ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A larger-than-usual batch of arm64 fixes for -rc3.
The bulk of the fixes are dealing with a bunch of issues with the
build system from the compat vDSO, which unfortunately led to some
significant Makefile rework to manage the horrible combinations of
toolchains that we can end up needing to drive simultaneously.
We came close to disabling the thing entirely, but Vincenzo was quick
to spin up some patches and I ended up picking up most of the bits
that were left [*]. Future work will look at disentangling the header
files properly.
Other than that, we have some important fixes all over, including one
papering over the miscompilation fallout from forcing
CONFIG_OPTIMIZE_INLINING=y, which I'm still unhappy about. Harumph.
We've still got a couple of open issues, so I'm expecting to have some
more fixes later this cycle.
Summary:
- Numerous fixes to the compat vDSO build system, especially when
combining gcc and clang
- Fix parsing of PAR_EL1 in spurious kernel fault detection
- Partial workaround for Neoverse-N1 erratum #1542419
- Fix IRQ priority masking on entry from compat syscalls
- Fix advertisment of FRINT HWCAP to userspace
- Attempt to workaround inlining breakage with '__always_inline'
- Fix accidental freeing of parent SVE state on fork() error path
- Add some missing NULL pointer checks in instruction emulation init
- Some formatting and comment fixes"
[*] Will's final fixes were
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
but they were already in linux-next by then and he didn't rebase
just to add those.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (21 commits)
arm64: armv8_deprecated: Checking return value for memory allocation
arm64: Kconfig: Make CONFIG_COMPAT_VDSO a proper Kconfig option
arm64: vdso32: Rename COMPATCC to CC_COMPAT
arm64: vdso32: Pass '--target' option to clang via VDSO_CAFLAGS
arm64: vdso32: Don't use KBUILD_CPPFLAGS unconditionally
arm64: vdso32: Move definition of COMPATCC into vdso32/Makefile
arm64: Default to building compat vDSO with clang when CONFIG_CC_IS_CLANG
lib: vdso: Remove CROSS_COMPILE_COMPAT_VDSO
arm64: vdso32: Remove jump label config option in Makefile
arm64: vdso32: Detect binutils support for dmb ishld
arm64: vdso: Remove stale files from old assembly implementation
arm64: vdso32: Fix broken compat vDSO build warnings
arm64: mm: fix spurious fault detection
arm64: ftrace: Ensure synchronisation in PLT setup for Neoverse-N1 #1542419
arm64: Fix incorrect irqflag restore for priority masking for compat
arm64: mm: avoid virt_to_phys(init_mm.pgd)
arm64: cpufeature: Effectively expose FRINT capability to userspace
arm64: Mark functions using explicit register variables as '__always_inline'
docs: arm64: Fix indentation and doc formatting
arm64/sve: Fix wrong free for task->thread.sve_state
...
The callers of xfs_bmap_local_to_extents_empty() log the inode
external to the function, yet this function is where the on-disk
format value is updated. Push the inode logging down into the
function itself to help prevent future mistakes.
Note that internal bmap callers track the inode logging flags
independently and thus may log the inode core twice due to this
change. This is harmless, so leave this code around for consistency
with the other attr fork conversion functions.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_attr_shortform_to_leaf() attempts to put the shortform fork back
together after a failed attempt to convert from shortform to leaf
format. While this code reallocates and copies back the shortform
attr fork data, it never resets the inode format field back to local
format. Further, now that the inode is properly logged after the
initial switch from local format, any error that triggers the
recovery code will eventually abort the transaction and shutdown the
fs. Therefore, remove the broken and unnecessary error handling
code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When a directory changes from shortform (sf) to block format, the sf
format is copied to a temporary buffer, the inode format is modified
and the updated format filled with the dentries from the temporary
buffer. If the inode format is modified and attempt to grow the
inode fails (due to I/O error, for example), it is possible to
return an error while leaving the directory in an inconsistent state
and with an otherwise clean transaction. This results in corruption
of the associated directory and leads to xfs_dabuf_map() errors as
subsequent lookups cannot accurately determine the format of the
directory. This problem is reproduced occasionally by generic/475.
The fundamental problem is that xfs_dir2_sf_to_block() changes the
on-disk inode format without logging the inode. The inode is
eventually logged by the bmapi layer in the common case, but error
checking introduces the possibility of failing the high level
request before this happens.
Update both of the dir2 and attr callers of
xfs_bmap_local_to_extents_empty() to log the inode core as
consistent with the bmap local to extent format change codepath.
This ensures that any subsequent errors after the format has changed
cause the transaction to abort.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We no longer need the extra mirror length tracking in the O_DIRECT code,
as we are able to track the maximum contiguous length in dreq->max_count.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When a series of O_DIRECT reads or writes are truncated, either due to
eof or due to an error, then we should return the number of contiguous
bytes that were received/sent starting at the offset specified by the
application.
Currently, we are failing to correctly check contiguity, and so we're
failing the generic/465 in xfstests when the race between the read
and write RPCs causes the file to get extended while the 2 reads are
outstanding. If the first read RPC call wins the race and returns with
eof set, we should treat the second read RPC as being truncated.
Reported-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Fixes: 1ccbad9f9f ("nfs: fix DIO good bytes calculation")
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
It turns out that the NMI latency workaround from commit:
6d3edaae16 ("x86/perf/amd: Resolve NMI latency issues for active PMCs")
ends up being too conservative and results in the perf NMI handler claiming
NMIs too easily on AMD hardware when the NMI watchdog is active.
This has an impact, for example, on the hpwdt (HPE watchdog timer) module.
This module can produce an NMI that is used to reset the system. It
registers an NMI handler for the NMI_UNKNOWN type and relies on the fact
that nothing has claimed an NMI so that its handler will be invoked when
the watchdog device produces an NMI. After the referenced commit, the
hpwdt module is unable to process its generated NMI if the NMI watchdog is
active, because the current NMI latency mitigation results in the NMI
being claimed by the perf NMI handler.
Update the AMD perf NMI latency mitigation workaround to, instead, use a
window of time. Whenever a PMC is handled in the perf NMI handler, set a
timestamp which will act as a perf NMI window. Any NMIs arriving within
that window will be claimed by perf. Anything outside that window will
not be claimed by perf. The value for the NMI window is set to 100 msecs.
This is a conservative value that easily covers any NMI latency in the
hardware. While this still results in a window in which the hpwdt module
will not receive its NMI, the window is now much, much smaller.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jerry Hoemann <jerry.hoemann@hpe.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6d3edaae16 ("x86/perf/amd: Resolve NMI latency issues for active PMCs")
Link: https://lkml.kernel.org/r/Message-ID:
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In perf_rotate_context(), when the first cpu flexible event fail to
schedule, cpu_rotate is 1, while cpu_event is NULL. Since cpu_event is
NULL, perf_rotate_context will _NOT_ call cpu_ctx_sched_out(), thus
cpuctx->ctx.is_active will have EVENT_FLEXIBLE set. Then, the next
perf_event_sched_in() will skip all cpu flexible events because of the
EVENT_FLEXIBLE bit.
In the next call of perf_rotate_context(), cpu_rotate stays 1, and
cpu_event stays NULL, so this process repeats. The end result is, flexible
events on this cpu will not be scheduled (until another event being added
to the cpuctx).
Here is an easy repro of this issue. On Intel CPUs, where ref-cycles
could only use one counter, run one pinned event for ref-cycles, one
flexible event for ref-cycles, and one flexible event for cycles. The
flexible ref-cycles is never scheduled, which is expected. However,
because of this issue, the cycles event is never scheduled either.
$ perf stat -e ref-cycles:D,ref-cycles,cycles -C 5 -I 1000
time counts unit events
1.000152973 15,412,480 ref-cycles:D
1.000152973 <not counted> ref-cycles (0.00%)
1.000152973 <not counted> cycles (0.00%)
2.000486957 18,263,120 ref-cycles:D
2.000486957 <not counted> ref-cycles (0.00%)
2.000486957 <not counted> cycles (0.00%)
To fix this, when the flexible_active list is empty, try rotate the
first event in the flexible_groups. Also, rename ctx_first_active() to
ctx_event_to_rotate(), which is more accurate.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <kernel-team@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 8d5bce0c37 ("perf/core: Optimize perf_rotate_context() event scheduling")
Link: https://lkml.kernel.org/r/20191008165949.920548-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
vtime_account_system() assumes that the target task to account cputime
to is always the current task. This is most often true indeed except on
task switch where we call:
vtime_common_task_switch(prev)
vtime_account_system(prev)
Here prev is the scheduling-out task where we account the cputime to. It
doesn't match current that is already the scheduling-in task at this
stage of the context switch.
So we end up checking the wrong task flags to determine if we are
accounting guest or system time to the previous task.
As a result the wrong task is used to check if the target is running in
guest mode. We may then spuriously account or leak either system or
guest time on task switch.
Fix this assumption and also turn vtime_guest_enter/exit() to use the
task passed in parameter as well to avoid future similar issues.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpengli@tencent.com>
Fixes: 2a42eb9594 ("sched/cputime: Accumulate vtime on top of nsec clocksource")
Link: https://lkml.kernel.org/r/20190925214242.21873-1-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The quota/period ratio is used to ensure a child task group won't get
more bandwidth than the parent task group, and is calculated as:
normalized_cfs_quota() = [(quota_us << 20) / period_us]
If the quota/period ratio was changed during this scaling due to
precision loss, it will cause inconsistency between parent and child
task groups.
See below example:
A userspace container manager (kubelet) does three operations:
1) Create a parent cgroup, set quota to 1,000us and period to 10,000us.
2) Create a few children cgroups.
3) Set quota to 1,000us and period to 10,000us on a child cgroup.
These operations are expected to succeed. However, if the scaling of
147/128 happens before step 3, quota and period of the parent cgroup
will be changed:
new_quota: 1148437ns, 1148us
new_period: 11484375ns, 11484us
And when step 3 comes in, the ratio of the child cgroup will be
104857, which will be larger than the parent cgroup ratio (104821),
and will fail.
Scaling them by a factor of 2 will fix the problem.
Tested-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Xuewei Zhang <xueweiz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Phil Auld <pauld@redhat.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: 2e8e192263 ("sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup")
Link: https://lkml.kernel.org/r/20191004001243.140897-1-xueweiz@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
kvmhv_switch_to_host() in arch/powerpc/kvm/book3s_hv_rmhandlers.S
needs to set kvmppc_vcore->in_guest to 0 to signal secondary CPUs to
continue. This happens after resetting the PCR. Before commit
13c7bb3c57 ("powerpc/64s: Set reserved PCR bits"), r0 would always
be 0 before it was stored to kvmppc_vcore->in_guest. However because
of this change in the commit:
/* Reset PCR */
ld r0, VCORE_PCR(r5)
- cmpdi r0, 0
+ LOAD_REG_IMMEDIATE(r6, PCR_MASK)
+ cmpld r0, r6
beq 18f
- li r0, 0
- mtspr SPRN_PCR, r0
+ mtspr SPRN_PCR, r6
18:
/* Signal secondary CPUs to continue */
stb r0,VCORE_IN_GUEST(r5)
We are no longer comparing r0 against 0 and loading it with 0 if it
contains something else. Hence when we store r0 to
kvmppc_vcore->in_guest, it might not be 0. This means that secondary
CPUs will not be signalled to continue. Those CPUs get stuck and
errors like the following are logged:
KVM: CPU 1 seems to be stuck
KVM: CPU 2 seems to be stuck
KVM: CPU 3 seems to be stuck
KVM: CPU 4 seems to be stuck
KVM: CPU 5 seems to be stuck
KVM: CPU 6 seems to be stuck
KVM: CPU 7 seems to be stuck
This can be reproduced with:
$ for i in `seq 1 7` ; do chcpu -d $i ; done ;
$ taskset -c 0 qemu-system-ppc64 -smp 8,threads=8 \
-M pseries,accel=kvm,kvm-type=HV -m 1G -nographic -vga none \
-kernel vmlinux -initrd initrd.cpio.xz
Fix by making sure r0 is 0 before storing it to
kvmppc_vcore->in_guest.
Fixes: 13c7bb3c57 ("powerpc/64s: Set reserved PCR bits")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191004025317.19340-1-jniethe5@gmail.com
Newer versions of GCC (>= 9) demand that the size of the string to be
copied must be explicitly smaller than the size of the destination.
Thus, the NULL char has to be taken into account on strncpy.
This will avoid the following compiling error:
tlbie_test.c: In function 'main':
tlbie_test.c:639:4: error: 'strncpy' specified bound 100 equals destination size
strncpy(logdir, optarg, LOGDIR_NAME_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191003211010.9711-1-desnesn@linux.ibm.com
Since commit 1211ee61b4 ("powerpc/pseries: Read TLB Block Invalidate
Characteristics"), a warning message is displayed when booting a guest
on top of KVM:
lpar: arch/powerpc/platforms/pseries/lpar.c pseries_lpar_read_hblkrm_characteristics Error calling get-system-parameter (0xfffffffd)
This message is displayed because this hypervisor is not supporting
the H_BLOCK_REMOVE hcall and thus is not exposing the corresponding
feature.
Reading the TLB Block Invalidate Characteristics should not be done if
the feature is not exposed.
Fixes: 1211ee61b4 ("powerpc/pseries: Read TLB Block Invalidate Characteristics")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191001132928.72555-1-ldufour@linux.ibm.com
After merging the powerpc tree, today's linux-next build (powerpc64
allnoconfig) failed like this:
arch/powerpc/mm/book3s64/pgtable.c:216:3:
error: implicit declaration of function 'radix__flush_all_lpid_guest'
radix__flush_all_lpid_guest() is only declared for
CONFIG_PPC_RADIX_MMU which is not set for this build.
Fix it by adding an empty version for the RADIX_MMU=n case, which
should never be called.
Fixes: 99161de3a2 ("powerpc/64s/radix: tidy up TLB flushing code")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[mpe: Munge change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190930101342.36c1afa0@canb.auug.org.au
Mark inode for force revalidation if LOOKUP_REVAL flag is set.
This tells the client to actually send a QueryInfo request to
the server to obtain the latest metadata in case a directory
or a file were changed remotely. Only do that if the client
doesn't have a lease for the file to avoid unneeded round
trips to the server.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently the client indicates that a dentry is stale when inode
numbers or type types between a local inode and a remote file
don't match. If this is the case attributes is not being copied
from remote to local, so, it is already known that the local copy
has stale metadata. That's why the inode needs to be marked for
revalidation in order to tell the VFS to lookup the dentry again
before openning a file. This prevents unexpected stale errors
to be returned to the user space when openning a file.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes: cb7a69e605 ("cifs: Initialize filesystem timestamp ranges")
Only very old servers (e.g. OS/2 and DOS) did not support
DCE TIME (100 nanosecond granularity). Fix the checks used
to set minimum and maximum times.
Fixes xfstest generic/258 (on 5.4-rc1 and later)
CC: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Message was intended only for developer temporary build
In addition cleanup two minor warnings noticed by Coverity
and a trivial change to workaround a sparse warning
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXZzy3AAKCRBiEGxRG/Sl
2wFjAP9BFsZMqiz8wTxlvn/vuVXg8V1TAbJzwn0rJJKPJsggnQD9HFBKJ3Vq995R
C02zqXE+8wJlqCGRK4pmJey5KamjLQo=
=JF8E
-----END PGP SIGNATURE-----
Merge tag 'led-fixes-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
- fix a leftover from earlier stage of development in the documentation
of recently added led_compose_name() and fix old mistake in the
documentation of led_set_brightness_sync() parameter name.
- MAINTAINERS: add pointer to Pavel Machek's linux-leds.git tree.
Pavel is going to take over LED tree maintainership from myself.
* tag 'led-fixes-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
Add my linux-leds branch to MAINTAINERS
leds: core: Fix leds.h structure documentation
Add pointer to my git tree to MAINTAINERS. I'd like to maintain
linux-leds for-next branch for 5.5.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Update the leds.h structure documentation to define the
correct arguments.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
- Don't clear FLAG_IS_OUT when emulating open drain/source in
gpiolib.
- Fix up the usage of nonexclusive GPIO descriptors from device
trees.
- Fix the incorrect IEC offset when toggling trigger edge in
the Spreadtrum driver.
- Use the correct unit for debounce settings in the MAX77620
driver.
-----BEGIN PGP SIGNATURE-----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=J0x0
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- don't clear FLAG_IS_OUT when emulating open drain/source in gpiolib
- fix up the usage of nonexclusive GPIO descriptors from device trees
- fix the incorrect IEC offset when toggling trigger edge in the
Spreadtrum driver
- use the correct unit for debounce settings in the MAX77620 driver
* tag 'gpio-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: max77620: Use correct unit for debounce times
gpio: eic: sprd: Fix the incorrect EIC offset when toggling
gpio: fix getting nonexclusive gpiods from DT
gpiolib: don't clear FLAG_IS_OUT when emulating open-drain/open-source
-----BEGIN PGP SIGNATURE-----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=btWt
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20191007' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinuxfix from Paul Moore:
"One patch to ensure we don't copy bad memory up into userspace"
* tag 'selinux-pr-20191007' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix context string corruption in convert_context()
This Kselftest update for Linux 5.4-rc3 consists fixes for existing
tests and the framework. Cristian Marussi's patches add ability to
skip targets (tests) and exclude tests that didn't build from run-list.
These patches improve the Kselftest results. Ability to skip targets
helps avoid running tests that aren't supported in certain environments.
As an example, bpf tests from mainline aren't supported on stable kernels
and have dependency on bleeding edge llvm. Being able to skip bpf on
systems that can't meet this llvm dependency will be helpful.
Kselftest can be built and installed from the main Makefile. This change
help simplify Kselftest use-cases which addresses request from users.
Kees Cook added per test timeout support to limit individual test run-time.
-----BEGIN PGP SIGNATURE-----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=vdrT
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes for existing tests and the framework.
Cristian Marussi's patches add the ability to skip targets (tests) and
exclude tests that didn't build from run-list. These patches improve
the Kselftest results. Ability to skip targets helps avoid running
tests that aren't supported in certain environments. As an example,
bpf tests from mainline aren't supported on stable kernels and have
dependency on bleeding edge llvm. Being able to skip bpf on systems
that can't meet this llvm dependency will be helpful.
Kselftest can be built and installed from the main Makefile. This
change help simplify Kselftest use-cases which addresses request from
users.
Kees Cook added per test timeout support to limit individual test
run-time"
* tag 'linux-kselftest-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: watchdog: Add command line option to show watchdog_info
selftests: watchdog: Validate optional file argument
selftests/kselftest/runner.sh: Add 45 second timeout per test
kselftest: exclude failed TARGETS from runlist
kselftest: add capability to skip chosen TARGETS
selftests: Add kselftest-all and kselftest-install targets
Comet Lake is the new 10th Gen Intel processor. Add two new CPU model
numbers to the Intel family list.
The CPU model numbers are not published in the SDM yet but they come
from an authoritative internal source.
[ bp: Touch up commit message. ]
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: ak@linux.intel.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1570549810-25049-2-git-send-email-kan.liang@linux.intel.com
We discussed a better location for this file, and agreed that
core-api/ is a good fit. Rename it to symbol-namespaces.rst
for disambiguation, and also add it to index.rst and MAINTAINERS.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/comedi/drivers/dt3000.c: In function dt3k_ai_insn_read:
drivers/staging/comedi/drivers/dt3000.c:511:27: warning: variable aref set but not used [-Wunused-but-set-variable]
It is not used since commit 2e310235ca ("staging:
comedi: dt3000: rename dt3k_ai_insn()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/1570520515-2186-7-git-send-email-zhengbin13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit ad67b74d24 ("printk: hash addresses printed with %p"),
an obfuscated kernel pointer is printed at boot:
vchiq: vchiq_init_state: slot_zero = (____ptrval____)
Remove the the print completely, as it's useless without the address.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Link: https://lore.kernel.org/r/20191008123346.3931-1-mcroce@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/sm750fb/ddk750_chip.c: In function set_chip_clock:
drivers/staging/sm750fb/ddk750_chip.c:59:15: warning: variable actual_mx_clk set but not used [-Wunused-but-set-variable]
It is not used since commit f0977109a5 ("staging:
sm750fb: lower case to fix camelcase checkpatch warning")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1570520515-2186-4-git-send-email-zhengbin13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/sm750fb/ddk750_mode.c: In function ddk750_setModeTiming:
drivers/staging/sm750fb/ddk750_mode.c:212:15: warning: variable uiActualPixelClk set but not used [-Wunused-but-set-variable]
It is not used since commit 81dee67e21 ("staging:
sm750fb: add sm750 to staging")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1570520515-2186-3-git-send-email-zhengbin13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If vchi_msg_dequeue return -1, variable m is not assigined,
need to return.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1570520515-2186-2-git-send-email-zhengbin13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building for a non-Cavium MIPS system with COMPILE_TEST=y, the
Octeon ethernet driver hits a number of issues due to use of macros
provided only for CONFIG_CAVIUM_OCTEON_SOC=y configurations. For
example:
drivers/staging/octeon/ethernet-rx.c:190:6: error:
'CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE' undeclared (first use in this function)
drivers/staging/octeon/ethernet-rx.c:472:25: error:
'OCTEON_IRQ_WORKQ0' undeclared (first use in this function)
These come from various asm/ headers that a non-Octeon build will be
using a non-Octeon version of.
Fix this by using the octeon-stubs.h header for non-Cavium MIPS builds,
and only using the real asm/octeon/ headers when building a Cavium
Octeon kernel configuration.
This requires that octeon-stubs.h doesn't redefine XKPHYS_TO_PHYS, which
is defined for MIPS by asm/addrspace.h which is pulled in by many other
common asm/ headers.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
URL: https://lore.kernel.org/linux-mips/CAMuHMdXvu+BppwzsU9imNWVKea_hoLcRt9N+a29Q-QsjW=ip2g@mail.gmail.com/
Fixes: 171a9bae68 ("staging/octeon: Allow test build on !MIPS")
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/r/20191007231741.2012860-1-paul.burton@mips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove typecast in the call to kfree as it is not needed.
Issue found using the below coccinelle script,
@@
type t1;
expression e;
@@
-kfree((t1 *)e);
+kfree(e);
Signed-off-by: Nachammai Karuppiah <nachukannan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Link: https://lore.kernel.org/r/1570511353-64646-1-git-send-email-nachukannan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch.pl warning: do not add new typedefs in
drivers/staging/octeon/octeon-stubs.h:41
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://lore.kernel.org/r/20191008040943.9283-1-wambui.karugax@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marco Felsch