Commit Graph

908 Commits

Author SHA1 Message Date
Corentin Chary 46dbca871d asus-wmi: add calls to INIT, SPEC and SFUN on init
INIT() call is needed to enable hotkeys on G73
SPEC() and SFUN() allow us to know more about
available features.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:22 -04:00
Corentin Chary 8fbea019a1 asus-wmi: fix and clean backlight code
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:21 -04:00
Corentin Chary 1d070f89a7 asus-wmi: try to guess the right DSTS methods
This is tricky, new WMI aware notebooks seems to use
0x53545344 while Eee PCs are using 0x53544344. But there
is no way to know if there is an Eee PC in that wild that is
using 0x53545344 or a notebook using 0x53544344. So the
driver try to guess the available DSTS method ... But most Eee PCs
never return 0xFFFFFFFE when a method is not available, they return
0 instead (and that's useless).

So, first, try 0x53544344 then 0x53545344. We will find
a better way when we got more data.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:21 -04:00
Corentin Chary d33da3b686 asus-wmi: factorise wmi_evaluate_method call
This patch create a single function to call the
WMI methods. This function handle inexistent methods (when
implemented by the WMI devices, and this is not the case on
Eee PCs), ACPI errors, etc..

Also pack struct bios_arg, and make sure that we always send
a 64bit buffer when calling a WMI method, because this is
needed on Asus notebooks.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:21 -04:00
Corentin Chary a75fe0d78e asus-wmi: handle "unknown status" bit
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:21 -04:00
Corentin Chary a7ce3f041e asus-wmi: introduce struct asus_rfkill
First, this allow use to remove the custom asusrfkill_wlan_query,
but this will also allow us to give struct asus_wmi * to
get_devstate/set_devstate later.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:20 -04:00
Corentin Chary 57ab7dae27 asus-wmi: minor cleanups
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:20 -04:00
Corentin Chary e12e6d94db eeepc-wmi: asus generic asus-wmi.ko module
New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
eeepc-wmi module on Asus notebooks, and we want to
keep the eeepc-wmi module for backward compatibility,
this patch introduce a new module, named asus-wmi, that
will be used by eeepc-wmi and the new Asus Notebook WMI
Driver.

eeepc-wmi's input device strings (device name and phys)
are kept, but rfkill and led names are changed (s/eeepc/asus/).
This should not break anything since rfkill are used by type or
index, not by name, and the eeepc::touchpad led wasn't working
correctly before 2.6.39 anyway.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:20 -04:00
Corentin Chary 5b799d4fb7 asus-wmi: move generic code to asus-wmi
New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
a module named eeepc-laptop on Asus Notebooks, start by
copying all the code to asus-wmi.c.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:20 -04:00
Durgadoss R f017fbe799 medfield: Add Thermal Driver
This is the basic thermal sensor driver for Intel MID platform using the
Medfield chipset. It plugs in via the thermal drivers and provides sensor
readings for the device sensors.

Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:19 -04:00
Anssi Hannula c0b9c64944 hp-wmi: add rfkill support for wireless query 0x1b
Some recent HP laptops use a new wireless query command type 0x1b.

Add support for it. Tested on HP Mini 5102.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:19 -04:00
Anssi Hannula 7cd635da42 hp-wmi: make rfkill initialization failure non-fatal
hp_wmi_rfkill_setup cleans up after itself now, so failing completely is
no longer necessary.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:19 -04:00
Anssi Hannula 6d97db590c hp-wmi: clear rfkill device pointers when appropriate
NULLify rfkill pointers during initialization. This prevents dereference
of invalid pointer in case the driver is rebound and some rfkill device
isn't detected anymore. Clear them also in hp_wmi_rfkill_setup failure
path so that an rfkill initialization failure doesn't need to be fatal
for the whole driver.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:18 -04:00
Anssi Hannula eceb7bdf64 hp-wmi: split rfkill initialization out of hp_wmi_bios_setup
Split initialization of rfkill devices from hp_wmi_bios_setup() to
hp_wmi_rfkill_setup(). This makes the code somewhat cleaner, especially
with the future command 0x1b rfkill support.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:18 -04:00
Anssi Hannula c3021ea1be hp-wmi: allow setting input and output buffer sizes separately
Split buffersize parameter of hp_wmi_perform_query to insize and
outsize. Existing callers are changed to use the same value for insize
and outsize to avoid any regressions, with the exception of
hp_wmi_set_block where the output buffer is unused and therefore outsize
is set to 0 (this change is not seen by BIOS code).

The maximum input buffer size is kept at 4 bytes as per struct
bios_args. Some commands exist that take longer buffers, but they
haven't been implemented. The data portion of bios_args can be trivially
made dynamically allocated later when such larger buffers become needed.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:18 -04:00
Anssi Hannula 25bb067a08 hp-wmi: remove a variable that is never read
Remove the status variable from hp_wmi_perform_query which holds the
return value from wmi_evaluate_method(). It is never checked as the
function bails out if the output buffer hasn't been allocated which
indicates the call failed.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:18 -04:00
Anssi Hannula 9af0e0fb70 hp-wmi: check query return value in hp_wmi_perform_query
Check BIOS provided return value code in hp_wmi_perform_query and print
a warning on error. Printing is suppressed for HPWMI_RET_UNKNOWN_CMDTYPE
which is returned when the command type is unsupported.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:17 -04:00
Mattia Dongili 7751ab8e60 sony-laptop: implement new backlight control method
Reasonably recent Vaios have a 0x12f or 0x137 handler that exposes a
fine lid backlight regulation with values ranging from 0 to 255.
The patch is based on findings and code from Javier Achirica
<achirica@gmail.com> and Marco Chiappero <marco@absence.it>

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:07:17 -04:00
Mattia Dongili bf15571401 sony-laptop: implement keyboard backlight support
Recent Vaios have the opportunity to control the keyboard backlight via
ACPI calls to the SNC device.
Introduce two module parameters to control how keyboard backlight should
be set at module loading (default to on and with 10 seconds timeout).

Tested-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:26 -04:00
Mattia Dongili 2a4f0c81ad sony-laptop: cache handles and report them via sysfs
Avoid calling into acpi each time we need to lookup a method handle
and report the available handles to ease collection of information when
debugging issues. Also move initialization of the platform driver
earlier to allow adding files from other setup functions.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:26 -04:00
Mattia Dongili 3672329c36 sony-laptop: remove unused Type4 define
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:25 -04:00
Mattia Dongili d669793802 sony-laptop: use pr_<level> for messages
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:25 -04:00
Mattia Dongili 4eeb50220a sony-laptop: ignore hard switch rfkill events (SPIC)
There is not much use for these events in userspace and handling the
events themselves seems to get in the way of the actual activation of
the rf devices. The SNC device doesn't expose them already.
https://bugzilla.kernel.org/show_bug.cgi?id=15303

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:24 -04:00
Mattia Dongili 56e6e716b5 sony-laptop: add some debug printk useful for bug reports
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:23 -04:00
Randy Dunlap 80887757e3 platform/x86: intel_mid_powerbutton needs INPUT
intel_mid_powerbtn.c uses input interfaces, so it should depend
on INPUT to fix build errors when CONFIG_INPUT is not enabled:

intel_mid_powerbtn.c:(.text+0x56ca8f): undefined reference to `input_event'
intel_mid_powerbtn.c:(.devinit.text+0x2e7b4): undefined reference to `input_allocate_device'
intel_mid_powerbtn.c:(.devinit.text+0x2e7ff): undefined reference to `input_set_capability'
intel_mid_powerbtn.c:(.devinit.text+0x2e84a): undefined reference to `input_register_device'
intel_mid_powerbtn.c:(.devinit.text+0x2e88b): undefined reference to `input_free_device'
intel_mid_powerbtn.c:(.devexit.text+0x42f0): undefined reference to `input_unregister_device'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Hong Liu <hong.liu@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:23 -04:00
Colin Ian King 820787fceb Enable Dell All-In-One volume up/down keys
Enable volume up and down hotkeys on WMI events
GUID 284A0E6B-380E-472A-921F-E52786257FB4 and
GUID 02314822-307C-4F66-bf0E-48AEAEB26CC8.

Also works around a firmware bug where the _WED method
should return an integer containing the key code and in fact
the method returns the key code in element zero of a buffer.

BugLink: http://bugs.launchpad.net/bugs/701530
BugLink: http://bugs.launchpad.net/bugs/676997

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:22 -04:00
Hong Liu 8eec8a1167 intel_mid_powerbtn: add power button driver for Medfield platform (#3)
The power button is connected to MSIC on Medfield, we will get two
interrupts from IOAPIC when pressing or releasing the power button.

Signed-off-by: Hong Liu <hong.liu@intel.com>
[Minor fixes as noted by Dmitry]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:21 -04:00
Corentin Chary e2d3d44b9a eeepc-wmi: add camera keys
These keys are supposed to be handled by any software
using the camera (like webKam or cheese...). They can
also be used to actually move the camera when possible.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:21 -04:00
Corentin Chary 43815941ef eeepc-wmi: reorder device ids
Each device seems to be in a "group" (devid >> 16 & 0xFF).

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:20 -04:00
Corentin Chary 4615bb6613 eeepc-wmi: add touchpad sysfs file
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:20 -04:00
Corentin Chary 3b81cf9d55 asus-laptop: remove deprecated interfaces (lcd_switch and display_get)
I should have done that one year ago, so it's more than
time to do it.

These two features use non-standard interfaces. There are the
only features that really need multiple path to guess what's
the right method name on a specific laptop.

Removing them allow to remove a lot of code an significantly
clean the driver.

This will affect the backlight code which won't be able to know
if the backlight is on or off.

The platform display file will also be write only (like the one
in eeepc-laptop).

Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:20 -04:00
Corentin Chary af96f87703 asus-laptop: let WLED alone on L1400B
Asus took the DSDT from another model (L84F), made some change
to make it work, but forgot to remove WLED method (the laptop
doesn't have a wireless card). They even didn't change the model
name.

ref: https://bugzilla.kernel.org/show_bug.cgi?id=25712

Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:19 -04:00
Corentin Chary 77ca5b0197 eeepc-wmi: comments keymap to clarify the meaning of some keys
Found while checking PDF manuals...

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:19 -04:00
Corentin Chary 8571d75d61 eeepc-wmi: real touchpad led device id is 0x001000012
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:19 -04:00
Corentin Chary c14d4b8ea7 eeepc-wmi: respect wireless_hotplug setting
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:18 -04:00
Corentin Chary b71872650f eeepc-wmi: support backlight power (bl_power) attribute
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:18 -04:00
Corentin Chary 54c799a50f eeepc-wmi: set the right key code for 0xe9
This key should power off the backlight, not the display,
it is also used in acpi/video.c to do the same thing.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:18 -04:00
Corentin Chary 2e9e159d8e eeepc-wmi: add wimax support
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:18 -04:00
Corentin Chary 9e1565bc39 eeepc-wmi: add camera and card reader support
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:17 -04:00
Corentin Chary aafa719dcd eeepc-wmi: use the presence bit correctly
I checked some more DSDT, and it seems that I wasn't
totally right about the meaning of DSTS return value.
Bit 0 is clearly the status of the device, and I discovered
that bit 16 is set when the device is present.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:17 -04:00
Corentin Chary 33e0e6fed0 eeepc-wmi: reorder defines
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:17 -04:00
Corentin Chary a04ce290bf eeepc-wmi: switch to platform_create_bundle()
This allow to remove ~30 lines of code.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:16 -04:00
Corentin Chary 0773d7f9f1 eeepc-wmi: add hibernate/resume callbacks
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:16 -04:00
Corentin Chary 5c95638d11 eeepc-wmi: add an helper using simple return codes
eeepc_wmi_get_devstate returns an acpi_status, so each
call need extra logic to handle the return code. This
patch add a simple getter, returning a boolean (or a
negative error code).

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:16 -04:00
Corentin Chary 7898cf1a36 eeepc-wmi: return proper error code in eeepc_rfkill_set()
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:16 -04:00
Corentin Chary 279f8f9549 eeepc-wmi: serialize access to wmi method
\AMW0.WMBC, which is the main method that we use,
is not reentrant. When wireless hotpluging is enabled,
toggling the status of the wireless device using WMBC will
trigger a notification and the notification handler need to
call WMBC again to get the new status of the device, this
will trigger the following error:

ACPI Error (dswload-0802): [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20100428/psloop-231)
ACPI Error (psparse-0537): Method parse/execution failed [\AMW0.WMBC] (Node f7023b88), AE_ALREADY_EXISTS
ACPI: Marking method WMBC as Serialized because of AE_ALREADY_EXISTS error

Since there is currently no way to tell the acpi subsystem to mark
a method as serialized, we do it in eeepc-wmi.

Of course, we could let the first call fail, and then it would work,
but it doesn't seems really clean, and it will make the first
WMBC call return a random value.

This patch was tested on EeePc 1000H with a RaLink RT2860
wireless card using the rt2800pci driver. rt2860sta driver
seems to deadlock when we remove the pci device...

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:15 -04:00
Corentin Chary afa7c88657 eeepc-wmi: add hotplug code for Eeepc 1000H
Implement wireless like hotplug handling (code stolen from eeepc-laptop).

Reminder: on some models rfkill is implemented by logically unplugging the
wireless card from the PCI bus. Despite sending ACPI notifications, this does
not appear to be implemented using standard ACPI hotplug - nor does the
firmware provide the _OSC method required to support native PCIe hotplug.
The only sensible choice appears to be to handle the hotplugging directly in
the platform driver.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:15 -04:00
Corentin Chary bc40cce201 eeepc-wmi: add wlan key found on 1015P
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:15 -04:00
Corentin Chary 5628e5aa12 eeepc-wmi: reorder keymap
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:14 -04:00
Paul Fox 89ca11771a OLPC XO-1.5 ebook switch driver
The OLPC XO-1.5 has an ebook switch, triggered when the laptop
screen is rotated then folding down, converting the device into ebook
form.

This switch is exposed through ACPI. Add a driver that exposes it
to userspace as an input device.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28 06:05:14 -04:00
Matthew Garrett bb7ca747f8 backlight: add backlight type
There may be multiple ways of controlling the backlight on a given
machine.  Allow drivers to expose the type of interface they are
providing, making it possible for userspace to make appropriate policy
decisions.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:43:59 -07:00
Jean Delvare 96b4b9bfea hp_accel: Fix driver name
I suspect that the "lis3lv02d" driver name is a legacy from before
the split into several modules. Use a specific name for the hp_accel
driver, for better error messages and easier investigation of issues.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:36 +01:00
Jean Delvare ff606677f6 Move lis3lv02d drivers to drivers/misc
The lis3lv02d drivers aren't hardware monitoring drivers, so the don't
belong to drivers/hwmon. Move them to drivers/misc, short of a better
home.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:36 +01:00
Jean Delvare efcfed9bad Move hp_accel to drivers/platform/x86
The hp_accel driver isn't a hardware monitoring driver, so it doesn't
belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP
doesn't ship non-x86 laptops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:36 +01:00
Linus Torvalds e16b396ce3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
  doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
  Update cpuset info & webiste for cgroups
  dcdbas: force SMI to happen when expected
  arch/arm/Kconfig: remove one to many l's in the word.
  asm-generic/user.h: Fix spelling in comment
  drm: fix printk typo 'sracth'
  Remove one to many n's in a word
  Documentation/filesystems/romfs.txt: fixing link to genromfs
  drivers:scsi Change printk typo initate -> initiate
  serial, pch uart: Remove duplicate inclusion of linux/pci.h header
  fs/eventpoll.c: fix spelling
  mm: Fix out-of-date comments which refers non-existent functions
  drm: Fix printk typo 'failled'
  coh901318.c: Change initate to initiate.
  mbox-db5500.c Change initate to initiate.
  edac: correct i82975x error-info reported
  edac: correct i82975x mci initialisation
  edac: correct commented info
  fs: update comments to point correct document
  target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
  ...

Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-18 10:37:40 -07:00
Keng-Yu Lin a3d77411e8 dell-laptop: Toggle the unsupported hardware killswitch
It is found on Dell Inspiron 1018 that the firmware reports that the hardware
killswitch is not supported. This makes the rfkill key not functional.

This patch forces the driver to toggle the firmware rfkill status in the case
that the hardware killswitch is indicated as unsupported by the firmware.

Signed-off-by: Keng-Yu Lin <keng-yu.lin@canonical.com>
Tested-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-02-21 17:06:21 -05:00
Seth Forshee 5ffba7e696 thinkpad_acpi: Always report scancodes for hotkeys
Some thinkpad hotkeys report key codes like KEY_FN_F8 when something
like KEY_VOLUMEDOWN is desired. Always provide the scan codes in
addition to the key codes to assist with debugging these issues. Also
send the scan code before the key code to match what other drivers do,
as some userspace utilities expect this ordering.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-02-21 17:06:20 -05:00
Matthew Garrett bbb706079a acer-wmi: Fix capitalisation of GUID
6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3 needs to be
6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 to match the hardware alias.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: stable@kernel.org
2011-02-21 17:06:18 -05:00
Randy Dunlap ad0f43063e platform/x86: ideapad-laptop depends on INPUT
Most platform/x86 drivers that use INPUT_SPARSEKMAP also depend on INPUT,
so do the same for ideapad-laptop.  This fixes a kconfig warning and
subsequent build errors when CONFIG_INPUT is disabled.

warning: (ACER_WMI && ASUS_LAPTOP && DELL_WMI && HP_WMI && PANASONIC_LAPTOP && IDEAPAD_LAPTOP && EEEPC_LAPTOP && EEEPC_WMI && MSI_WMI && TOPSTAR_LAPTOP && ACPI_TOSHIBA) selects INPUT_SPARSEKMAP which has unmet direct dependencies (!S390 && INPUT)

ERROR: "input_free_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_register_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_allocate_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_unregister_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-02-21 17:06:17 -05:00
Vasiliy Kulikov b80b168f91 platform: x86: acer-wmi: world-writable sysfs threeg file
Don't allow everybody to write to hardware registers.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-02-21 17:06:15 -05:00
Vasiliy Kulikov 8040835760 platform: x86: asus_acpi: world-writable procfs files
Don't allow everybody to change ACPI settings.  The comment says that it
is done deliberatelly, however, the comment before disp_proc_write()
says that at least one of these setting is experimental.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-02-21 17:06:14 -05:00
Vasiliy Kulikov 8a6a142c12 platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files
Don't allow everybody to change WMI settings.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-02-21 17:06:13 -05:00
Thomas Gleixner 98401ae434 platform-drivers: x86: pmic: Use request_irq instead of chained handler
There is no need to install a chained handler for this hardware. This
is a plain x86 IOAPIC interrupt which is handled by the core code
perfectly fine. There is nothing special about demultiplexing these
gpio interrupts which justifies a custom hack. Replace it by a plain
old interrupt handler installed with request_irq. That makes the code
agnostic about the underlying primary interrupt hardware. The overhead
for this is minimal, but it gives us the advantage of accounting,
balancing and to detect interrupt storms. gpio interrupts are not
really that performance critical.

Patch fixups from akpm

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2011-02-21 17:06:11 -05:00
Jiri Kosina 0a9d59a246 Merge branch 'master' into for-next 2011-02-15 10:24:31 +01:00
Thomas Gleixner d4b7de612d platform-drivers: x86: pmic: Use irq_chip buslock mechanism
The set_type function of the pmic irq chip is a horrible hack. It
schedules work because it cannot access the scu chip from the set_type
function. That breaks the assumption, that the type is set after
set_type has returned.

irq_chips provide buslock functions to avoid the above. Convert the
driver to use the proper model.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Alek Du <alek.du@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-02-07 16:52:28 -05:00
Thomas Gleixner cb8e5e6a60 platform-drivers: x86: Convert pmic to new irq_chip functions
Old functions will go away soon. Remove the stray semicolons while at
it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Alek Du <alek.du@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-02-07 16:52:22 -05:00
Thomas Gleixner 180e9d19ee platform-drivers: x86: pmic: Fix up bogus irq hackery
commit 456dc301([PATCH] intel_pmic_gpio: modify EOI handling following
change of kernel irq subsystem) changes

-	desc->chip->eoi(irq);
+
+	if (desc->chip->irq_eoi)
+		desc->chip->irq_eoi(irq_get_irq_data(irq));
+	else
+		dev_warn(pg->chip.dev, "missing EOI handler for irq %d\n", irq);

With the following explanation:

 "Latest kernel has many changes in IRQ subsystem and its interfaces,
  like adding irq_eoi" for struct irq_chip, this patch will make it
  support both the new and old interface."

This is completely bogus.

#1) The changelog does not match the patch at all

#2) This driver relies on the assumption that it sits behind an eoi
    capable interrupt line. If the implementation of the underlying
    chip changes from eoi to irq_eoi then this driver has to follow
    that change and not add a total bogosity.

Remove the sillyness and retrieve the interrupt data from irq_desc
directly. No need to got through circles to look it up.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Alek Du <alek.du@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-02-07 16:52:16 -05:00
Huang Weiyi 2f215a7d6d intel_scu_ipc: remove duplicated #include
Remove duplicated #include('s) in
  drivers/platform/x86/intel_scu_ipc.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-31 12:59:34 +10:00
Alan Cox f5c66d70ac intel_scu_ipcutils: Fix the license tag
GPL V2 should be GPL v2

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26 08:57:18 +10:00
Axel Lin ecb5646cb0 intel_scu_ipc: fix signedness bug
busy_loop() returns negative error code, thus change err variable
from u32 to int to properly propagate correct error code.

Also remove unneeded initialization for err and i variables.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26 08:57:17 +10:00
Jesper Juhl 9a756de129 X86, Acer, WMI: Do not double include linux/dmi.h in acer-wmi.c
Including linux/dmi.h once in drivers/platform/x86/acer-wmi.c is enough.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Reviewed-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-25 12:03:19 +01:00
Linus Torvalds 52cfd503ad Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (59 commits)
  ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework
  ACPI: fix resource check message
  ACPI / Battery: Update information on info notification and resume
  ACPI: Drop device flag wake_capable
  ACPI: Always check if _PRW is present before trying to evaluate it
  ACPI / PM: Check status of power resources under mutexes
  ACPI / PM: Rename acpi_power_off_device()
  ACPI / PM: Drop acpi_power_nocheck
  ACPI / PM: Drop acpi_bus_get_power()
  Platform / x86: Make fujitsu_laptop use acpi_bus_update_power()
  ACPI / Fan: Rework the handling of power resources
  ACPI / PM: Register power resource devices as soon as they are needed
  ACPI / PM: Register acpi_power_driver early
  ACPI / PM: Add function for updating device power state consistently
  ACPI / PM: Add function for device power state initialization
  ACPI / PM: Introduce __acpi_bus_get_power()
  ACPI / PM: Introduce function for refcounting device power resources
  ACPI / PM: Add functions for manipulating lists of power resources
  ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes
  ACPICA: Update version to 20101209
  ...
2011-01-13 20:15:35 -08:00
Linus Torvalds 008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Rafael J. Wysocki 40b7397579 Platform / x86: Make fujitsu_laptop use acpi_bus_update_power()
Use the new function acpi_bus_update_power(), which is safer than
acpi_bus_get_power(), for getting device power state in
acpi_fujitsu_add() and acpi_fujitsu_hotkey_add().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:45 -05:00
Mattia Dongili 1a7d946993 sony-laptop: support new hotkeys on the P, Z and EC series
Add new mappings for assist, VAIO, zoom and eject buttons present on
refurbished P, Z and EC models.

Reported-by: Gyorgy Jeney <nog.lkml@gmail.com>
Reported-by: Stephan Mueller <smueller@chronox.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-10 12:00:22 -05:00
Mark Brown 0c51a4d8ab platform/x86: Consistently select LEDS Kconfig options
Currently the x86 platform devices are not consistent about selecting
or depending on the LEDs Kconfig variables, and this inconsistency
leads to Kconfig getting upset and refusing to offer LEDs (even on
non-x86 platforms):

drivers/platform/x86/Kconfig:422:error: recursive dependency detected!
drivers/platform/x86/Kconfig:422:       symbol EEEPC_WMI depends on ACPI_WMI
drivers/platform/x86/Kconfig:438:       symbol ACPI_WMI is selected by ACER_WMI
drivers/platform/x86/Kconfig:18:        symbol ACER_WMI depends on LEDS_CLASS
drivers/leds/Kconfig:10:        symbol LEDS_CLASS is selected by EEEPC_WMI

Fix this by always selecting rather than depending on the symbols as
slightly more drivers use this approach already and it seems more
user friendly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-10 11:55:25 -05:00
Randy Dunlap a46a780835 sony-laptop: fix sparse non-ANSI function warning
Fix sparse warning for non-ANSI function declaration:

drivers/platform/x86/sony-laptop.c:1134:35: warning: non-ANSI function declaration of function 'sony_nc_rfkill_update'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	Matthew Garrett <mjg@redhat.com>
Cc:	Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-10 11:55:25 -05:00
Randy Dunlap 7027d8b570 intel_ips: fix sparse non-ANSI function warning
Fix sparse warning for non-ANSI function declaration:

drivers/platform/x86/intel_ips.c:1477:25: warning: non-ANSI function declaration of function 'ips_link_to_i915_driver'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-10 11:55:25 -05:00
Albert Astals Cid 4a198be7f0 Support KHLB2 in the compal laptop driver
Add the KHLB2 model identifier to the list of supported models

Signed-off-by: Albert Astals Cid <aacid@kde.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:29:44 -05:00
From: Lee, Chun-Yi 59ccf2f3d5 acer-wmi: Enabled Acer Launch Manager mode
Enabled Acer Launch Manager mode to disable the EC raw behavior for
communication devices when WMID3 method available. And, we also add a
ec_raw_mode kernel module option for enable The EC raw behavior mode
when anyone what reset it back.
When Acer Launch Manager mode enabled, EC will stop to touch any
communication devices' RF state or power state that causes conflict
with rfkill_input or any userland daemon to charge the rfkill rules.

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: Jiri Benc <jbenc@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:27:19 -05:00
Feng Tang 456dc301cc [PATCH] intel_pmic_gpio: modify EOI handling following change of kernel irq subsystem
Latest kernel has many changes in IRQ subsystem and its interfaces, like adding
"irq_eoi" for struct irq_chip, this patch will make it support both the new
and old interface.

Cc: Alek Du <alek.du@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:26:57 -05:00
Jesper Juhl 213658516f ACPI Thinkpad: We must always call va_end() after va_start() but do not do so in thinkpad_acpi.c::acpi_evalf()
Hi,

In drivers/platform/x86/thinkpad_acpi.c::acpi_evalf() we don't always call
va_end() after va_start(). This patch corrects that.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:26:25 -05:00
Lee, Chun-Yi 466449cfe7 acer-wmi: Initialize wlan/bluetooth/wwan rfkill software block state
Initial wlan/bluetooth/wwan rfkill software block state when acer-wmi driver
probe. Acer notebook can save the devices state and this patch can use it to
initial the devices' rfkill state.

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:48 -05:00
Lee, Chun-Yi 6c3df88f19 acer-wmi: Detect the WiFi/Bluetooth/3G devices available
Check the Acer OEM-specific Type AA to detect the WiFi/Bluetooth/3G
devices available or not, and set the devices capability flag.

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: Jiri Benc <jbenc@suse.cz>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:48 -05:00
Lee, Chun-Yi b3c9092b2f acer-wmi: Add 3G rfkill sysfs file
Add 3G rfkill sysfs file for provide userland to control 3G device
on/off by using WMI method.

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: Jiri Benc <jbenc@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Carlos Corbaho <carlos@strangeworlds.co.uk>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:48 -05:00
Lee, Chun-Yi 3fdca87d10 acer-wmi: Add acer wmi hotkey events support
Add acer wmi hotkey event support. Install a wmi notify handler to
transfer wmi event key to key code, then send out keycode through acer
wmi input device to userland.

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:47 -05:00
Sedat Dilek e98062ed6d platform/x86: Kconfig: Replace select by depends on ACPI_WMI
With 'make oldnoconfig' I see these warnings in linux-next (next-20101208):

drivers/platform/x86/Kconfig:422:error: recursive dependency detected!
drivers/platform/x86/Kconfig:422:       symbol EEEPC_WMI depends on ACPI_WMI
drivers/platform/x86/Kconfig:438:       symbol ACPI_WMI is selected by ACER_WMI
drivers/platform/x86/Kconfig:18:        symbol ACER_WMI depends on LEDS_CLASS
drivers/leds/Kconfig:10:        symbol LEDS_CLASS is selected by EEEPC_WMI

This patch replaces all "select on ACPI_WMI" by "depends on ACPI_WMI".

Quote from David Woodhouse:
"A better policy is: "NEVER USE SELECT"."

Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:47 -05:00
Ike Panhc c1f73658ed ideapad: pass ideapad_priv as argument (part 2)
Passing ideapad_priv as argument and try not to using too much global variable.
This is part 2 for rfkill.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:47 -05:00
Ike Panhc 8693ae846c ideapad: pass ideapad_priv as argument (part 1)
Passing ideapad_priv as argument and try not to using too much global variable.
This is part 1 for platform driver and input device.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:47 -05:00
Ike Panhc a4b5a2794a ideapad: add markups, unify comments and return result when init
1. Add markups on init and exit functions
2. Unify the comments in the same style
3. Return result when module initial

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:46 -05:00
Ike Panhc f63409ae91 ideapad: add hotkey support
Hotkey enabled by this patch:
  Fn+F3: Video mode switch
  Fn+F5: software rfkill for wifi

For some ideapad when push Fn+F3, hardware generates Super-P keys, those key
will not be enabled by this patch.

Thanks for Dave Hansen report the problem. If CONFIG_INPUT_SPARSEKMAP is not
set, when building, you will have error message:

  ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined!
  ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined!
  ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined!

To select INPUT_SPARSEKMAP solve this issue.

Ref: http://lkml.org/lkml/2010/12/2/340

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:46 -05:00
Ike Panhc c9f718d0c6 ideapad: let camera power control entry under platform driver
The entry was at /sys/devices/LNXSYSTM:00/../VPC2004:00/camera_power
move to /sys/devices/platform/ideapad/camera_power

Add document about usage of ideapad node in sysfs.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:46 -05:00
Ike Panhc 98ee69191d ideapad: add platform driver for ideapad
Create /sys/devices/platform/ideapad for nodes of ideapad landing.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:45 -05:00
Namhyung Kim 9c23225006 fujitsu-laptop: fix compiler warning on pnp_ids
Annotate pnp_ids as '__used' to fix following warning:

  CC      drivers/platform/x86/fujitsu-laptop.o
drivers/platform/x86/fujitsu-laptop.c:1243: warning: ‘pnp_ids’ defined but not used

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:45 -05:00
Dan Carpenter e1e0dacba5 WMI: return error if wmi_create_device() fails
The break resets the retval to 0 but we want to return an error code.
This was introduced in c64eefd48c "WMI: embed struct device directly
into wmi_block"

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-07 17:03:45 -05:00
Corentin Chary d358cb55a4 eeepc-wmi: never load if legacy device is enabled
If legacy device (SB.ATKD - ASUS010) used by eeepc-laptop
is enabled, don't allow eeepc-wmi to load because:
- eeepc-laptop may be loaded, and can conflict with
  eeepc-wmi (they both try to register eeepc::touchpad
  led for example).
- the WMI interface is inteded to be used when the OS is
  not detected as Win 7. And when this is the case, the
  ASUS010 device is disabled.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:44 -05:00
Corentin Chary 62a75d8313 eeepc-laptop: add a getter for touchpad led
Allow te get the current led state in a more accurate way.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:44 -05:00
Corentin Chary dfed65d56f eeepc-wmi: remove unneeded static
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:44 -05:00
Corentin Chary 4c4edfa3d3 eeepc-wmi: claim eeepc-wmi maintainership
Since eeepc-wmi has currently no official maintainer, I claim
maintainership of this driver, and add it to the acpi4asus project.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:43 -05:00
Corentin Chary 2a3f0064f2 eeepc-wmi: fix confusion between ctrl_param and retval
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:43 -05:00
Corentin Chary 8c1b2d83e8 eeepc-wmi: add debugfs entries
eeepc-wmi/    - debugfs root directory
  dev_id      - current dev_id
  ctrl_param  - current ctrl_param
  devs        - call DEVS(dev_id, ctrl_param) and print result
  dsts        - call DSTS(dev_id)  and print result

DEVS and DSTS are the main functions used in eeepc-wmi, this
will allow to test new features without patching the drivers.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:43 -05:00
Corentin Chary 4e37b42d5a eeepc-wmi: use attribute group to manage attributes
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:42 -05:00
Corentin Chary ba48fdb969 eeepc-wmi: add rfkill support for wlan, bluetooth and 3g
wimax support is missing because I don't have any DSDT
with WMI and wimax support.

Most of the code comes from eeepc-laptop.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:42 -05:00
Corentin Chary 084fca6312 eeepc-wmi: add touchpad led support
Most of the code comes from eeepc-laptop.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:42 -05:00
Corentin Chary 27c136c873 eeepc-wmi: rework eeepc_wmi_init and eeepc_wmi_exit
The old code was using platform_driver.probe to initialize
eeepc_wmi context. That's a mistake because if probe fail,
eeepc_platform_register() won't tell anyone, and chaos will happen.

Wrap add and remove code inside eeepc_wmi_add() / eeepc_wmi_remove(),
and try to use the static platform_device only in eeepc_wmi_init()
and eeepc_wmi_exit()

The code is now very similar to eeepc-laptop, except eeepc_laptop_add
and eeepc_laptop_remove are called from acpi_driver, not module
init/exit functions, but WMI doesn't provide such functionalities (yet ?).

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:42 -05:00
Herton Ronaldo Krzesinski 72135d21b5 classmate-laptop: add missing input_sync call
Add missing input_sync call in cmpc_keys_handler function.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
2011-01-07 17:03:41 -05:00
Herton Ronaldo Krzesinski 698e1641a3 classmate-laptop: little optimization for cmpc_rfkill_block
We don't need to call bios/acpi (cmpc_set_rfkill_wlan) if the blocked
state is already set to the same value (little optimization). This can
happen for example if we initialize the module with same initial
hardware state (rfkill core always call cmpc_rfkill_block on
initialization here).

Also GWRI method only accepts 0 or 1 for setting rfkill block, as can be
seen on AML code from acpidump->DSDT from a classmate sample I have, so
should be fine setting state only to 0 or 1 directly.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
2011-01-07 17:03:41 -05:00
Colin King 58f6425eb9 WMI: Cater for multiple events with same GUID
WMI data blocks can contain WMI events with the same GUID but with
different notifiy_ids, for example volume up/down hotkeys.
This patch enables a single event handler to be registered and
unregistered against all events with same GUID but different
notify_ids.  Since an event handler is passed the notify_id of
an event it can can differentiate between the different events.

The patch also ensures we only register and unregister a device per
unique GUID.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:41 -05:00
Joe Perches 3098064d3b drivers/platform/x86: Remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:40 -05:00
Sreedhara DS 5369c02d95 intel_scu_ipc: Utility driver for intel scu ipc
This driver implements ioctl and interfaces with intel scu ipc driver. It
is used to access pmic/msic registers from user space and firmware update
utility.

Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
[Extensive clean up and debug]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07 17:03:40 -05:00
Linus Torvalds b4c6e2ea5e Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, earlyprintk: Move mrst early console to platform/ and fix a typo
  x86, apbt: Setup affinity for apb timers acting as per-cpu timer
  ce4100: Add errata fixes for UART on CE4100
  x86: platform: Move iris to x86/platform where it belongs
  x86, mrst: Check platform_device_register() return code
  x86/platform: Add Eurobraille/Iris power off support
  x86, mrst: Add explanation for using 1960 as the year offset for vrtc
  x86, mrst: Fix dependencies of "select INTEL_SCU_IPC"
  x86, mrst: The shutdown for MRST requires the SCU IPC mechanism
  x86: Ce4100: Add reboot_fixup() for CE4100
  ce4100: Add PCI register emulation for CE4100
  x86: Add CE4100 platform support
  x86: mrst: Set vRTC's IRQ to level trigger type
  x86: mrst: Add audio driver bindings
  rtc: Add drivers/rtc/rtc-mrst.c
  x86: mrst: Add vrtc driver which serves as a wall clock device
  x86: mrst: Add Moorestown specific reboot/shutdown support
  x86: mrst: Parse SFI timer table for all timer configs
  x86/mrst: Add SFI platform device parsing code
2011-01-06 11:06:31 -08:00
Eric Anholt 63ee41d794 drm/i915, intel_ips: When i915 loads after IPS, make IPS relink to i915.
The IPS driver is designed to be able to run detached from i915 and
just not enable GPU turbo in that case, in order to avoid module
dependencies between the two drivers.  This means that we don't know
what the load order between the two is going to be, and we had
previously only supported IPS after (optionally) i915, but not i915
after IPS.  If the wrong order was chosen, you'd get no GPU turbo, and
something like half the possible graphics performance.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
2010-12-23 09:51:36 +00:00
Jiri Kosina 4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Thadeu Lima de Souza Cascardo 8b14d7b22c wmi: use memcmp instead of strncmp to compare GUIDs
While looking for the duplicates in /sys/class/wmi/, I couldn't find
them. The code that looks for duplicates uses strncmp in a binary GUID,
which may contain zero bytes. The right function is memcmp, which is
also used in another section of wmi code.

It was finding 49142400-C6A3-40FA-BADB-8A2652834100 as a duplicate of
39142400-C6A3-40FA-BADB-8A2652834100. Since the first byte is the fourth
printed, they were found as equal by strncmp.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@kernel.org
2010-12-06 17:19:13 -05:00
Zeng Zhaoming 53c96dfdd0 ACPI, hp-wmi: Fix memory leak in acpi query
Free acpi return memory after query.

Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:07:10 -05:00
Anisse Astier a80e1cd701 msi-wmi: fix semantically incorrect use of keycode instead of scancode
I didn't know the difference between the two when I wrote this code in
commit c30116c6f0.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:00:28 -05:00
Anisse Astier 92f61cbc61 msi-wmi: Add mute key support
Add new MUTE key seen on Medion Akoya AIO PC P4010D using MSI motherboard
(Product Name: MS-7621)

Reported-and-tested-by: Mark Huijgen <mark.sf.net@huijgen.tk>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:00:22 -05:00
Corentin Chary ba1ff5be52 asus-laptop: add wimax and wwan support
Asus UL30A has a 3G chip, but the radio is disabled by default.
The DSDT also reference a WIMAX device, which is not present on this model.

This patch adds two new files: wwan and wimax to control WWAN and
WIMAX devices. It does not use rfkill, because like WLED and BLED,
we don't know yet that the two ACPI functions will always control the
radio, they may control only the leds on some hardware.

We may add rfkill switchs later.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:00:15 -05:00
Dmitry Torokhov 67fa38ec09 eeepc-wmi: fix compiler warning
This fixes the following:

  CC [M]  drivers/platform/x86/eeepc-wmi.o
drivers/platform/x86/eeepc-wmi.c:322: warning: initialization from incompatible pointer type

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:00:09 -05:00
Vernon Mauery 1d37db77c1 ibm_rtl: _RTL_ is not available in UEFI mode
Some of the IBM servers that are supported by ibm_rtl
can run in both Legacy mode (BIOS) and in UEFI mode.
When running in UEFI mode, it is possible that the
EBDA table exists but cannot be mapped and reports
errors.  We need to make sure that by default we don't
try to probe the machines if they are running in UEFI
mode.

Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 12:00:03 -05:00
Vernon Mauery a2262260f9 ibm_rtl: Loosen the DMI criteria to all IBM machines
Allow all IBM machines to pass the DMI check so that we
don't have to add them one by one to the driver.  Any IBM
machine that has the _RTL_ table in the EBDA will work.

Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 11:59:57 -05:00
Julia Lawall d41014b92d drivers/platform/x86/thinkpad_acpi.c: delete double assignment
Delete successive assignments to the same location.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 11:59:51 -05:00
Jon Dowland a49010f53b toshiba_acpi.c: Add key_entry for a lone FN keypress
A lone FN key press on a Toshiba Portégé R700 without another key in
conjunction results in an ACPI event and a spurious error message on
the console.

Add a key entry to map this event to a KEY_FN keypress. This prevents
the console message.

Signed-off-by: Jon Dowland <jmtd@debian.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 11:59:37 -05:00
Randy Dunlap c72b844ed2 ibm_rtl: fix printk format warning
Fix printk format warning:

drivers/platform/x86/ibm_rtl.c:305:warning: format '%#llx' expects type 'long long unsigned int', but argument 2 has type 'phys_addr_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Keith Mannthey <kmannth@us.ibm.com>
Cc: Vernon Mauery <vernux@us.ibm.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-24 11:59:31 -05:00
Lionel Debroux acc2472ed3 backlight: constify backlight_ops
backlight_device_register has been expecting a const "ops" argument, and using
it as such, since 9905a43b2d. Let's make the
remaining backlight_ops instances const.

Inspired by hunks of the grsecurity patch, updated for newer kernels.

Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-16 14:14:02 +01:00
Feng Tang 1da4b1c6a4 x86/mrst: Add SFI platform device parsing code
SFI provides a series of tables. These describe the platform devices present
including SPI and I²C devices, as well as various sensors, keypads and other
glue as well as interfaces provided via the SCU IPC mechanism (intel_scu_ipc.c)

This patch is a merge of the core elements and relevant fixes from the
Intel development code by Feng, Alek, myself into a single coherent patch
for upstream submission.

It provides the needed infrastructure to register I2C, SPI and platform devices
described by the tables, as well as handlers for some of the hardware already
supported in kernel. The 0.8 firmware also provides GPIO tables.

Devices are created at boot time or if they are SCU dependant at the point an
SCU is discovered. The existing Linux device mechanisms will then handle the
device binding. At an abstract level this is an SFI to Linux device translator.

Device/platform specific setup/glue is in this file. This is done so that the
drivers for the generic I²C and SPI bus devices remain cross platform as they
should.

(Updated from RFC version to correct the emc1403 name used by the firmware
 and a wrongly used #define)

Signed-off-by: Alek Du <alek.du@linux.intel.com>
LKML-Reference: <20101109112158.20013.6158.stgit@localhost.localdomain>
[Clean ups, removal of 0.7 support]
Signed-off-by: Feng Tang <feng.tang@linux.intel.com>
[Clean ups]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-09 14:45:52 +01:00
Uwe Kleine-König b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Zimny Lech 61d8e11e51 Remove duplicate includes from many files
Signed-off-by: Zimny Lech <napohybelskurwysynom2010@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:18 -07:00
Linus Torvalds fbaab1dc19 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (44 commits)
  eeepc-wmi: Add cpufv sysfs interface
  eeepc-wmi: add additional hotkeys
  panasonic-laptop: Simplify calls to acpi_pcc_retrieve_biosdata
  panasonic-laptop: Handle errors properly if they happen
  intel_pmic_gpio: fix off-by-one value range checking
  IBM Real-Time "SMI Free" mode driver -v7
  Add OLPC XO-1 rfkill driver
  Move hdaps driver to platform/x86
  ideapad-laptop: Fix Makefile
  intel_pmic_gpio: swap the bits and mask args for intel_scu_ipc_update_register
  ideapad: Add param: no_bt_rfkill
  ideapad: Change the driver name to ideapad-laptop
  ideapad: rewrite the sw rfkill set
  ideapad: rewrite the hw rfkill notify
  ideapad: use EC command to control camera
  ideapad: use return value of _CFG to tell if device exist or not
  ideapad: make sure we bind on the correct device
  ideapad: check VPC bit before sync rfkill hw status
  ideapad: add ACPI helpers
  dell-laptop: Add debugfs support
  ...
2010-10-25 08:28:13 -07:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Chris Bagwell 7f80d734b3 eeepc-wmi: Add cpufv sysfs interface
eeepc-laptop provides a sysfs interface to read and control what it
calls cpufv.  When WMI is enabled, the ACPI interface changes slightly
and becames a write-only control with 3 valid values.

Expose cpufv again to allow for user space utils that can extended battery
life noticably and come a little closer to parity with eeepc-laptop.

Write-only is OK for most user space apps because read status was
mostly used to prevent unneeded mode changes.  Since this same check
to ignore changes to same mode also exists in the DSDT then it was
wasted ACPI call.

acpi_osi="!Windows 2009" can be used for get back eeepc-laptop's
read support of cpufv for debugging things such as behaviour
during resume.

This patch was tested with EEE PC 1005PE by monitoring powertop output while
writing values of "0", "1", and "2" and by reviewing the decompiled DSDT of
an 1201NL and comparing it to 1005PE's DSDT.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:53 -04:00
Chris Bagwell eda1748418 eeepc-wmi: add additional hotkeys
Added 4 hotkeys using same keymap values as eeepc-latop.
These are mousepad toggle, resolution change, screen off,
and task manager.  These were tested on 1005PE and are the
Fn-F3, F4, F7, and F9, respectively.

Also, added a new hot key for power toggles (Fn-Space on 1005PE)
and is meant to drive cpufv interface from userspace.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:51 -04:00
Jean Delvare e253fb944d panasonic-laptop: Simplify calls to acpi_pcc_retrieve_biosdata
Function acpi_pcc_retrieve_biosdata is always called with parameters
(pcc, pcc->sinf), so we can drop the second parameter. It was
dangerous to pass the sinf array separately anyway, as its length is
checked as pcc->num_sifr, which pretty much assumed it was pcc->sinf
(or at least had the same size.)

This change makes the code slightly more compact and thus marginally
faster.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:50 -04:00
Jean Delvare aa13857f13 panasonic-laptop: Handle errors properly if they happen
acpi_pcc_retrieve_biosdata() returns success instead of error if
HKEY.SINF is invalid. Fix this.

Furthermore, if acpi_pcc_retrieve_biosdata() returns an error
during device addition, initialization is properly reverted but value
0 is returned, which means success. This would cause a crash when
later using or removing the device, so fix this too.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Bruno Premont <bonbons@linux-vserver.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:49 -04:00
Axel Lin 4119617919 intel_pmic_gpio: fix off-by-one value range checking
In pmic_irq_type(), we use gpio as array index for trigger,
thus the valid value range for gpio should be 0 .. NUM_GPIO - 1.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:47 -04:00
Vernon Mauery 35f0ce032b IBM Real-Time "SMI Free" mode driver -v7
After a period of RFC for this driver, I think it is ready
for inclusion in the platform-driver-x86 tree, hopefully to
be staged in the next merge window into Linus's tree.

--Vernon

------------------------------------------------------------

IBM Real-Time "SMI Free" mode driver

This driver supports the Real-Time Linux (RTL) BIOS feature.
The RTL feature allows non-fatal System Management Interrupts
(SMIs) to be disabled on supported IBM platforms and is
intended to be coupled with a user-space daemon to monitor
the hardware in a way that can be prioritized and scheduled
to better suit the requirements for the system.

The Device is presented as a special "_RTL_" table to the OS
in the Extended BIOS Data Area.  There is a simple protocol
for entering and exiting the mode at runtime.  This driver
creates a simple sysfs interface to allow a simple entry and
exit from RTL mode in the UFI/BIOS.

Since the driver is specific to IBM SystemX hardware (x86-
based servers) it only builds on x86 builds.  To reduce the
risk of loading on the wrong hardware, the module uses DMI
information and checks a list of servers that are known to
work.

Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:46 -04:00
Daniel Drake 260586d2b4 Add OLPC XO-1 rfkill driver
Add a software rfkill switch for the WLAN interface in the OLPC XO-1
laptop. It uses the OLPC embedded controller to cut/restore power to
the Marvell WLAN chip on the motherboard.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:44 -04:00
Jean Delvare bd9fc3a723 Move hdaps driver to platform/x86
The hdaps driver isn't a hardware monitoring driver, so it shouldn't
live under driver/hwmon. drivers/platform/x86 seems much more
appropriate, as the driver is only useful on x86 laptops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Frank Seidel <frank@f-seidel.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 10:10:43 -04:00
Matthew Garrett 75b2d09a29 ideapad-laptop: Fix Makefile
The makefile didn't get updated when the driver changed name, which broke
the build.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:51 -04:00
Alek Du ffcfff3a8d intel_pmic_gpio: swap the bits and mask args for intel_scu_ipc_update_register
The intel_scu_ipc_update_register 2nd paramter should the bits and 3rd
paramter should be the mask.

This typo was introduced during IPC function changing...

Reported-by: Ryan Zhou <ryan.zhou@intel.com>
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:51 -04:00
Ike Panhc bfa97b7dab ideapad: Add param: no_bt_rfkill
Add new module parameter that force module not to register bluetooth rfkill.

There is report that saying using this bluetooth rfkill to enable/disable
bluetooth will let bluetooth device initial failed when enable on Lenovo
ideapad S12. Fortunately there is another rfkill registered by bluetooth
driver for S12 and user can shutdown the bluetooth by either bluetooth driver
or HW RF switch.

For dual OS user, it may have some trouble that using Linux after turning off
bluetooth with another OS if we do not register bluetooth rfkill at all. So
we will force bluetooth enable when no_bt_rfkill=1.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Tested-by: Mario 'BitKoenig' Holbe <Mario.Holbe@TU-Ilmenau.DE>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:51 -04:00
Ike Panhc 57ac3b051c ideapad: Change the driver name to ideapad-laptop
Since the platform drivers doing more for laptops than just using specific
ACPI device. It will be good to change the name from *_acpi to *-laptop.

Reference: http://lkml.org/lkml/2010/8/14/154

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:51 -04:00
Ike Panhc fa08359ee2 ideapad: rewrite the sw rfkill set
Control power of rf modules by ec commands

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:50 -04:00
Ike Panhc 2b7266bd49 ideapad: rewrite the hw rfkill notify
1. Read hw rfkill status by ec command
2. Not to touch sw status of each rfkill when hw rfkill notify
3. Initial rfkill status when module loaded

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:50 -04:00
Ike Panhc 26c81d5c9a ideapad: use EC command to control camera
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:50 -04:00
Ike Panhc dfa7f6fe0a ideapad: use return value of _CFG to tell if device exist or not
There are several bits of the return value of _CFG shows if RF/Camera devices
exist or not.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:50 -04:00
Ike Panhc 6f8371c05e ideapad: make sure we bind on the correct device
By reading from method _CFG to make sure we bind on the correct VPC2004 device.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:49 -04:00
Ike Panhc 8e7d354370 ideapad: check VPC bit before sync rfkill hw status
Check VPC bit to make sure the HW rfkill is touched.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:49 -04:00
Ike Panhc 6a09f21dd1 ideapad: add ACPI helpers
There are two methods under VPC2004 which is used to access VDAT/VCMD of EC
register. Add helpers for read and write these two registers.

And add read_method_int for reading the return value from ACPI methods which
requires no parameter.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:49 -04:00
Keng-Yu Lin 037accfa14 dell-laptop: Add debugfs support
Export the status of RF killswitch through debugfs.

The killswitch status is obtained by the SMI to BIOS. Exporting this status
through debugfs can help identify the issue with the misbehaving firmware.

Signed-off-by: Keng-Yu Lin <keng-yu.lin@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21 09:36:49 -04:00