Commit Graph

69 Commits

Author SHA1 Message Date
Dave Airlie 05ea893c46 Merge remote branch 'anholt/drm-intel-next' into drm-next
* anholt/drm-intel-next: (515 commits)
  drm/i915: Fix out of tree builds
  drm/i915: move fence lru to struct drm_i915_fence_reg
  drm/i915: don't allow tiling changes on pinned buffers v2
  drm/i915: Be extra careful about A/D matching for multifunction SDVO
  drm/i915: Fix DDC bus selection for multifunction SDVO
  drm/i915: cleanup mode setting before unmapping registers
  drm/i915: Make fbc control wrapper functions
  drm/i915: Wait for the GPU whilst shrinking, if truly desperate.
  drm/i915: Use spatio-temporal dithering on PCH
  [MTD] Remove zero-length files mtdbdi.c and internal.ho
  pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs
  libata: Fix several inaccuracies in developer's guide
  slub: Fix bad boundary check in init_kmem_cache_nodes()
  raid6: fix recovery performance regression
  KEYS: call_sbin_request_key() must write lock keyrings before modifying them
  KEYS: Use RCU dereference wrappers in keyring key type code
  KEYS: find_keyring_by_name() can gain access to a freed keyring
  ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice)
  ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582
  ALSA: take tu->qlock with irqs disabled
  ...
2010-05-19 09:35:51 +10:00
Alex Deucher ce8f53709b drm/radeon/kms/pm: rework power management
- Separate dynpm and profile based power management methods.  You can select the pm method
  by echoing the selected method ("dynpm" or "profile") to power_method in sysfs.
- Expose basic 4 profile in profile method
  "default" - default clocks
  "auto" - select between low and high based on ac/dc state
  "low" - DC, low power mode
  "high" - AC, performance mode
  The current base profile is "default", but it should switched to "auto" once we've tested
  on more systems.  Switching the state is a matter of echoing the requested profile to
  power_profile in sysfs.  The lowest power states are selected automatically when dpms turns
  the monitors off in all states but default.
- Remove dynamic fence-based reclocking for the moment.  We can revisit this later once we
  have basic pm in.
- Move pm init/fini to modesetting path.  pm is tightly coupled with display state.  Make sure
  display side is initialized before pm.
- Add pm suspend/resume functions to make sure pm state is properly reinitialized on resume.
- Remove dynpm module option.  It's now selectable via sysfs.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:52 +10:00
Eric Anholt 34dc4d4423 Merge remote branch 'origin/master' into drm-intel-next
Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/i915_drv.h
	drivers/gpu/drm/radeon/r300.c

The BSD ringbuffer support that is landing in this branch
significantly conflicts with the Ironlake PIPE_CONTROL fix on master,
and requires it to be tested successfully anyway.
2010-05-10 13:36:52 -07:00
Linus Torvalds 7ebd467551 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms/legacy: only enable load detection property on DVI-I
  drm/radeon/kms: fix panel scaling adjusted mode setup
  drivers/gpu/drm/drm_sysfs.c: sysfs files error handling
  drivers/gpu/drm/radeon/radeon_atombios.c: range check issues
  gpu: vga_switcheroo, fix lock imbalance
  drivers/gpu/drm/drm_memory.c: fix check for end of loop
  drivers/gpu/drm/via/via_video.c: fix off by one issue
  drm/radeon/kms/agp The wrong AGP chipset can cause a NULL pointer dereference
  drm/radeon/kms: r300 fix CS checker to allow zbuffer-only fastfill
2010-05-04 19:08:12 -07:00
Marek Olšák 797fd5b9da drm/radeon/kms: r300 fix CS checker to allow zbuffer-only fastfill
Signed-off-by: Marek Olšák <maraeo@gmail.com>
2010-04-28 17:20:41 +10:00
Linus Torvalds 0bfb82449c Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: Fix sparc regression in r300_scratch()
  drm: make sure vblank interrupts are disabled at DPMS time
  drm/radeon/kms/evergreen: No EnableYUV table
  drm/radeon: 9800 SE has only one quadpipe
  drm/radeon/kms: don't print error for legal crtcs.
  drm/radeon/kms/evergreen: fix LUT setup
2010-04-27 08:22:50 -07:00
Jerome Glisse a1e9ada3e1 drm/radeon/kms: R3XX-R4XX fix GPU reset code
Previous reset code leaded to computer hard lockup (need to unplug
the power too reboot the computer) on various configuration. This
patch change the reset code to avoid hard lockup. The GPU reset
is failing most of the time but at least user can log in remotely
or properly shutdown the computer.

Two issues were leading to hard lockup :
- Writting to the scratch register lead to hard lockup most likely
because the write back mecanism is in fuzy state after GPU lockup.
- Resetting the GPU memory controller and not reinitializing it
after leaded to hard lockup. We did only reinitialize in case of
successfull reset thus unsuccessfull reset quickly leaded to hard
lockup.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-27 09:48:16 +10:00
Tormod Volden 94f7bf6473 drm/radeon: 9800 SE has only one quadpipe
Although these cards have 2 pipelines on the silicon only
the first passed the QA and the other should be disabled.

http://www.digital-daily.com/video/ati-radeon9800se/
http://www.rojakpot.com/showarticle.aspx?artno=101&pgno=1

agd5f: add some other SE cards as well; fix up kms

Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-23 13:54:59 +10:00
Dave Airlie 0bcb1d844a Merge branch 'drm-radeon-lockup' into drm-core-next
* drm-radeon-lockup:
  drm/radeon/kms: simplify & improve GPU reset V2
  drm/radeon/kms: rename gpu_reset to asic_reset
  drm/radeon/kms: fence cleanup + more reliable GPU lockup detection V4

Conflicts:
	drivers/gpu/drm/radeon/r300.c
2010-04-20 13:15:05 +10:00
Linus Torvalds 73c6c7fbb7 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add FireMV 2400 PCI ID.
  drm/radeon/kms: allow R500 regs VAP_ALT_NUM_VERTICES and VAP_INDEX_OFFSET
  drivers/gpu/radeon: Add MSPOS regs to safe list.
  drm/radeon/kms: disable the tv encoder when tv/cv is not in use
  drm/radeon/kms: adjust pll settings for tv
  drm/radeon/kms: fix tv dac conflict resolver
  drm/radeon/kms/evergreen: don't enable hdmi audio stuff
  drm/radeon/kms/atom: fix dual-link DVI on DCE3.2/4.0
  drm/radeon/kms: fix rs600 tlb flush
  drm/radeon/kms: print GPU family and device id when loading
  drm/radeon/kms: fix calculation of mipmapped 3D texture sizes
  drm/radeon/kms: only change mode when coherent value changes.
  drm/radeon/kms: more atom parser fixes (v2)
2010-04-19 07:27:06 -07:00
Marek Olšák cae94b0ad9 drm/radeon/kms: allow R500 regs VAP_ALT_NUM_VERTICES and VAP_INDEX_OFFSET
[airlied: fix V_A_N_V to not be safe and fix check to make sure only r500
 - bump userspace version]

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19 14:17:02 +10:00
Linus Torvalds 2f10ffcfb2 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (29 commits)
  drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers
  drm/nv50: implement gpio set/get routines
  drm/nv50: parse/use some more de-magiced parts of gpio table entries
  drm/nouveau: store raw gpio table entry in bios gpio structs
  drm/nv40: Init some tiling-related PGRAPH state.
  drm/nv50: Add NVA3 support in ctxprog/ctxvals generator.
  drm/nv50: another dodgy DP hack
  drm/nv50: punt hotplug irq handling out to workqueue
  drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders
  drm/nv50: Allow using the NVA3 new compute class.
  drm/nv50: cleanup properly if PDISPLAY init fails
  drm/nouveau: fixup the init failure paths some more
  drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark
  drm/nv40: add LVDS table quirk for Dell Latitude D620
  drm/nv40: rework lvds table parsing
  drm/nouveau: detect vram amount once, and save the value
  drm/nouveau: remove some unused members from drm_nouveau_private
  drm/nouveau: Make use of TTM busy_placements.
  drm/nv50: add more 0x100c80 flushy magic
  drm/nv50: fix fbcon when framebuffer above 4GiB mark
  ...
2010-04-09 11:50:01 -07:00
Jerome Glisse 90aca4d274 drm/radeon/kms: simplify & improve GPU reset V2
This simplify and improve GPU reset for R1XX-R6XX hw, it's
not 100% reliable here are result:
- R1XX/R2XX works bunch of time in a row, sometimes it
  seems it can work indifinitly
- R3XX/R3XX the most unreliable one, sometimes you will be
  able to reset few times, sometimes not even once
- R5XX more reliable than previous hw, seems to work most
  of the times but once in a while it fails for no obvious
  reasons (same status than previous reset just no same
  happy ending)
- R6XX/R7XX are lot more reliable with this patch, still
  it seems that it can fail after a bunch (reset every
  2sec for 3hour bring down the GPU & computer)

This have been tested on various hw, for some odd reasons
i wasn't able to lockup RS480/RS690 (while they use to
love locking up).

Note that on R1XX-R5XX the cursor will disapear after
lockup haven't checked why, switch to console and back
to X will restore cursor.

Next step is to record the bogus command that leaded to
the lockup.

V2 Fix r6xx resume path to avoid reinitializing blit
module, use the gpu_lockup boolean to avoid entering
inifinite waiting loop on fence while reiniting the GPU

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 11:21:11 +10:00
Jerome Glisse a2d07b7438 drm/radeon/kms: rename gpu_reset to asic_reset
Patch rename gpu_reset to asic_reset in prevision of having
gpu_reset doing more stuff than just basic asic reset.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 11:21:04 +10:00
Jerome Glisse 225758d8ba drm/radeon/kms: fence cleanup + more reliable GPU lockup detection V4
This patch cleanup the fence code, it drops the timeout field of
fence as the time to complete each IB is unpredictable and shouldn't
be bound.

The fence cleanup lead to GPU lockup detection improvement, this
patch introduce a callback, allowing to do asic specific test for
lockup detection. In this patch the CP is use as a first indicator
of GPU lockup. If CP doesn't make progress during 1second we assume
we are facing a GPU lockup.

To avoid overhead of testing GPU lockup frequently due to fence
taking time to be signaled we query the lockup callback every
500msec. There is plenty code comment explaining the design & choise
inside the code.

This have been tested mostly on R3XX/R5XX hw, in normal running
destkop (compiz firefox, quake3 running) the lockup callback wasn't
call once (1 hour session). Also tested with forcing GPU lockup and
lockup was reported after the 1s CP activity timeout.

V2 switch to 500ms timeout so GPU lockup get call at least 2 times
   in less than 2sec.
V3 store last jiffies in fence struct so on ERESTART, EBUSY we keep
   track of how long we already wait for a given fence
V4 make sure we got up to date cp read pointer so we don't have
   false positive

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:42:45 +10:00
Michel Dänzer 57b54ea6b7 drm/radeon: R300 AD only has one quad pipe.
Gleaned from the Mesa code.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=27355 .

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 09:56:40 +10:00
Tejun Heo 336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Jerome Glisse f927456202 drm/radeon/kms: avoid possible oops (call gart_fini before gart_disable)
radeon_gart_fini might call GART unbind callback function which
might try to access GART table but if gart_disable is call first
the GART table will be unmapped so any access to it will oops.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-31 13:11:42 +10:00
Alex Deucher f47299c55a drm/radeon/kms: display watermark fixes
- rs780/880 were using the wrong bandwidth functions
- convert r1xx-r4xx to use the same pm sclk/mclk structs as
r5xx+
- move bandwidth setup to a common function

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-31 13:02:06 +10:00
Alex Deucher 29fb52ca78 drm/radeon/kms: expose thermal/fan i2c buses
Look up i2c bus in the power table and expose it.
You'll need to load a hwmon driver for any chips
on the bus, this patch just exposes the bus.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
2010-03-31 09:38:06 +10:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Daniel Vetter e6990375ef drm/radeon: include radeon_asic.h in the asic specific files
In essence this creates a home for all asic specific declarations in
radeon_asic.h

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15 11:27:22 +10:00
Marek Olšák 939461d59d drm/radeon/kms: add support for square microtiles on r3xx-r5xx
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-25 11:36:12 +10:00
Rafał Miłecki aa5120d2ef drm/radeon/kms: implement reading active PCIE lanes on R600+
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-23 09:48:56 +10:00
Jerome Glisse 8e36113082 drm/radeon/kms: fix R3XX/R4XX memory controller initialization
Version 2 of memory controller did break the initialization for
R3XX/R4XX hardware. This patch fix it.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-23 09:46:22 +10:00
Jerome Glisse d594e46ace drm/radeon/kms: simplify memory controller setup V2
Get rid of _location and use _start/_end also simplify the
computation of vram_start|end & gtt_start|end. For R1XX-R2XX
we place VRAM at the same address of PCI aperture, those GPU
shouldn't have much memory and seems to behave better when
setup that way. For R3XX and newer we place VRAM at 0. For
R6XX-R7XX AGP we place VRAM before or after AGP aperture this
might limit to limit the VRAM size but it's very unlikely.
For IGP we don't change the VRAM placement.

Tested on (compiz,quake3,suspend/resume):
PCI/PCIE:RV280,R420,RV515,RV570,RV610,RV710
AGP:RV100,RV280,R420,RV350,RV620(RPB*),RV730
IGP:RS480(RPB*),RS690,RS780(RPB*),RS880

RPB: resume previously broken

V2 correct commit message to reflect more accurately the bug
and move VRAM placement to 0 for most of the GPU to avoid
limiting VRAM.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-18 14:49:35 +10:00
Pauli Nieminen 44ca7478d4 drm/radeon: Add asic hook for dma copy to r200 cards.
r200 cards have dma engine which can be used to tranfer data
between vram and system memory.

r300 dma engine registers match r200 dma engine. Enabling
dma copy for r200 is simple as hooking r200 asic to already
existing function r300_copy_dma.

Rename r300_dma_copy to r200_dma_copyto reflect that supports
starts from r200 cards.

v2: Created a new asic object for r200 cards.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-18 14:47:54 +10:00
Dave Airlie 8256856568 drm/radeon/kms: set gart pages to invalid on unbind and point to dummy page
this uses a new entrypoint to invalidate gart entries instead of using 0.
Changed to rather than pointing to 0 address point empty entry to dummy
page. This might help to avoid hard lockup if for some wrong
reasons GPU try to access unmapped GART entry.

I'm not 100% sure this is going to work, we probably need to allocate
a dummy page and point all the GTT entries at it similiar to what AGP does.
but we can test this first I suppose.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11 19:11:32 +10:00
Alex Deucher c836a41267 drm/radeon/kms: add functions to get current pcie lanes
Currently unused.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09 09:32:26 +10:00
Alex Deucher 4612dc9799 drm/radeon/kms: clean up some low-hanging magic numbers
Switch some magic numbers to their proper defines.
The register header madness needs to be cleaned up
at some point.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09 09:31:20 +10:00
Dave Airlie 5ff5571767 drm/radeon/kms: fix r300 vram width calculations
This was incorrect according to the docs and the UMS driver does
it like this.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05 14:00:03 +10:00
Jerome Glisse 655efd3dc9 drm/radeon/kms: don't call suspend path before cleaning up GPU
In suspend path we unmap the GART table while in cleaning up
path we will unbind buffer and thus try to write to unmapped
GART leading to oops. In order to avoid this we don't call the
suspend path in cleanup path. Cleanup path is clever enough
to desactive GPU like the suspend path is doing, thus this was
redondant.

Tested on: RV370, R420, RV515, RV570, RV610, RV770 (all PCIE)

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05 11:49:52 +10:00
Jerome Glisse d0269ed858 drm/radeon/kms: Make sure we release AGP device if we acquired it
In some case we weren't releasing the AGP device at module unloading.
This leaded to unfunctional AGP at next module load. This patch make
sure we release the AGP bus if we acquire it.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08 13:10:13 +10:00
Jerome Glisse cafe6609d6 drm/radeon/kms: Schedule host path read cache flush through the ring V2
R300 family will hard lockup if host path read cache flush is
done through MMIO to HOST_PATH_CNTL. But scheduling same flush
through ring seems harmless. This patch remove the hdp_flush
callback and add a flush after each fence emission which means
a flush after each IB schedule. Thus we should have same behavior
without the hard lockup.

Tested on R100,R200,R300,R400,R500,R600,R700 family.

V2: Adjust fence counts in r600_blit_prepare_copy()

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08 13:09:59 +10:00
Marek Olšák 512889f450 drm/radeon/kms: add 3DC compression support
There are 2 formats:
ATI1N: 64 bits per 4x4 block, one-channel format
ATI2N: 128 bits per 4x4 block, two-channel format

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:04 +10:00
Marek Olšák 46c64d4bfa drm/radeon/kms: allow rendering while no colorbuffer is set on r300
Because hardware cannot disable all colorbuffers directly to do depth-only
rendering, a user should:
- disable reading from a colorbuffer in blending
- disable fastfill
- set the color channel mask to 0 to prevent writing to a colorbuffer

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:04 +10:00
Dave Airlie d785d78bbd drm/radeon/kms: fix r100->r500 CS checker for compressed textures. (v2)
This adds support for compressed textures to the r100->r500 CS
checker, it lets me run openarena and the demos in mesa fine.

Thanks to Maciej Cencora for initial comments.

Changes since v1:
fix calculations with Maciej formulas

Reviewed-by: Maciej Cencora <m.cencora@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-16 16:10:45 +10:00
Maciej Cencora 6e7267721f drm/radeon/kms: allow for texture tiling
This adds the relocations for texture tiling for KMS.

Signed-off-by: Maciej Cencora <m.cencora@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-16 16:09:19 +10:00
Rafał Miłecki 6234077d6b drm/radeon/kms: init pm on all chipsets
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-16 15:56:15 +10:00
Dave Airlie 550e2d9270 drm/radeon/kms: restore surface registers on resume.
On resume on my rv530 laptop surface cntl was left disabled, so
wierd stuff would happen with rendering to a tiled front buffer.

This checks if the surface regs are assigned to bos and reprograms
the surface registers on resume using the same path that clears
them all on init.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:25:45 +10:00
Alex Deucher 92cde00cba drm/radeon/kms/legacy: set common regs to sane value
The DDX and radeonfb always set these regs to a sane value.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 08:51:12 +10:00
Jerome Glisse 4c78867912 drm/radeon/kms: Rework radeon object handling
The locking & protection of radeon object was somewhat messy.
This patch completely rework it to now use ttm reserve as a
protection for the radeon object structure member. It also
shrink down the various radeon object structure by removing
field which were redondant with the ttm information. Last it
converts few simple functions to inline which should with
performances.

airlied: rebase on top of r600 and other changes.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 14:00:18 +10:00
Dave Airlie 1614f8b17b drm/radeon/kms: add irq mitigation code for sw interrupt.
We really don't need to process every irq that comes in, we only
really want to do SW irq processing when we are actually waiting for
a fence to pass. I'm not 100% sure this is race free esp on non-MSI systems
so it needs some testing.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 14:00:13 +10:00
Dave Airlie 72542d7705 drm/radeon/kms: ignore unposted GPUs with no BIOS.
If we find a GPU but we can't find its BIOS and it isn't posted,
then ignore it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 11:37:17 +10:00
Dave Airlie 17e15b0c71 drm/radeon/kms: AGP systems need PCI bus mastering enabled
We might not hit this yet, but when if we do any sort of writeback
we really need to enable PCI bus mastering on these systems from
what I can see.

This enables PCI BM on all radeons that require it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 11:36:41 +10:00
Matt Turner a77f171843 drm/radeon/kms: use RADEON_GPU_PAGE_SIZE instead of 4096
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-16 08:49:23 +10:00
Jerome Glisse 62a8ea3f7b drm/radeon/kms: Remove old init path as no hw use it anymore
This remove old init path and allow code cleanup, now all hw
use the new init path, see top of radeon.h for description of
this.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-02 09:33:46 +10:00
Jerome Glisse 207bf9e90c drm/radeon/kms: Convert R300 to new init path
Also cleanup register specific to R300.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-02 08:51:48 +10:00
Jerome Glisse ca6ffc64cb drm/radeon/kms: Convert RS400/RS480 to new init path & fix legacy VGA (V3)
Also cleanup register specific to RS400/RS480. This patch also fix
legacy VGA register used to disable VGA access we were programming
wrong register. Now we should properly disable VGA on r100 up to
rs400 asics. Note that RS400/RS480 resume is broken, it hangs the
computer while reprogramming dynamic clock, doesn't work either
without that patch. We need to spend more time investigating this
issue. Version 2 of the patch remove dead code that was left
commented out in the previous version. Version 3 correct the
placement on IGP of the VRAM inside GPU address space to match the
stollen RAM placement of IGP.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-02 08:51:46 +10:00
Dave Airlie 513bcb4655 drm/radeon/kms: don't require up to 64k allocations. (v2)
This avoids needing to do a kmalloc > PAGE_SIZE for the main
indirect buffer chunk, it adds an accessor for all reads from
the chunk and caches a single page at a time for subsequent
reads.

changes since v1:
Use a two page pool which should be the most common case
a single packet spanning > PAGE_SIZE will be hit, but I'm
having trouble seeing anywhere we currently generate anything like that.
hopefully proper short page copying at end
added parser_error flag to set deep errors instead of having to test
every ib value fetch.
fixed bug in patch that went to list.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:18 +10:00