Commit Graph

54 Commits

Author SHA1 Message Date
H. Peter Anvin 8a50e5135a x86-32: Use symbolic constants, safer CPUID when enabling EFER.NX
Use symbolic constants rather than hard-coded values when setting
EFER.NX in head_32.S, and do a more rigorous test for the validity of
the response when probing for the extended CPUID range.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <1258154897-6770-2-git-send-email-hpa@zytor.com>
Acked-by: Kees Cook <kees.cook@canonical.com>
2009-11-16 13:44:56 -08:00
Linus Torvalds 5bb241b325 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Remove redundant non-NUMA topology functions
  x86: early_printk: Protect against using the same device twice
  x86: Reduce verbosity of "PAT enabled" kernel message
  x86: Reduce verbosity of "TSC is reliable" message
  x86: mce: Use safer ways to access MCE registers
  x86: mce, inject: Use real inject-msg in raise_local
  x86: mce: Fix thermal throttling message storm
  x86: mce: Clean up thermal throttling state tracking code
  x86: split NX setup into separate file to limit unstack-protected code
  xen: check EFER for NX before setting up GDT mapping
  x86: Cleanup linker script using new linker script macros.
  x86: Use section .data.page_aligned for the idt_table.
  x86: convert to use __HEAD and HEAD_TEXT macros.
  x86: convert compressed loader to use __HEAD and HEAD_TEXT macros.
  x86: fix fragile computation of vsyscall address
2009-09-26 10:13:35 -07:00
Ingo Molnar 704daf55c7 Merge branch 'x86/asm' into x86/urgent
Merge reason: The linker script cleanups are ready for upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-25 10:47:00 +02:00
Tim Abbott abe1ee3a22 Use macros for .data.page_aligned section.
This patch changes the remaining direct references to
.data.page_aligned in C and assembly code to use the macros in
include/linux/linkage.h.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-21 06:27:08 +02:00
Tim Abbott 02b7da37f7 Use macros for .bss.page_aligned section.
This patch changes the remaining direct references to
.bss.page_aligned in C and assembly code to use the macros in
include/linux/linkage.h.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-21 06:27:08 +02:00
Linus Torvalds 78f28b7c55 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
  x86: Move get/set_wallclock to x86_platform_ops
  x86: platform: Fix section annotations
  x86: apic namespace cleanup
  x86: Distangle ioapic and i8259
  x86: Add Moorestown early detection
  x86: Add hardware_subarch ID for Moorestown
  x86: Add early platform detection
  x86: Move tsc_init to late_time_init
  x86: Move tsc_calibration to x86_init_ops
  x86: Replace the now identical time_32/64.c by time.c
  x86: time_32/64.c unify profile_pc
  x86: Move calibrate_cpu to tsc.c
  x86: Make timer setup and global variables the same in time_32/64.c
  x86: Remove mca bus ifdef from timer interrupt
  x86: Simplify timer_ack magic in time_32.c
  x86: Prepare unification of time_32/64.c
  x86: Remove do_timer hook
  x86: Add timer_init to x86_init_ops
  x86: Move percpu clockevents setup to x86_init_ops
  x86: Move xen_post_allocator_init into xen_pagetable_setup_done
  ...

Fix up conflicts in arch/x86/include/asm/io_apic.h
2009-09-18 14:05:47 -07:00
Tim Abbott 4ae59b916d x86: convert to use __HEAD and HEAD_TEXT macros.
This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  It also eliminates the
".text.head" output section (instead placing head code at the start of
the .text output section), which should be harmless.

This patch only changes the sections in the actual kernel, not those
in the compressed boot loader.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-09-18 10:21:50 -07:00
Jeremy Fitzhardinge 1ea0d14e48 x86/i386: Make sure stack-protector segment base is cache aligned
The Intel Optimization Reference Guide says:

	In Intel Atom microarchitecture, the address generation unit
	assumes that the segment base will be 0 by default. Non-zero
	segment base will cause load and store operations to experience
	a delay.
		- If the segment base isn't aligned to a cache line
		  boundary, the max throughput of memory operations is
		  reduced to one [e]very 9 cycles.
	[...]
	Assembly/Compiler Coding Rule 15. (H impact, ML generality)
	For Intel Atom processors, use segments with base set to 0
	whenever possible; avoid non-zero segment base address that is
	not aligned to cache line boundary at all cost.

We can't avoid having a non-zero base for the stack-protector
segment, but we can make it cache-aligned.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: <stable@kernel.org>
LKML-Reference: <4AA01893.6000507@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-03 21:30:51 +02:00
Pan, Jacob jun 162bc7ab01 x86: Add hardware_subarch ID for Moorestown
x86 bootprotocol 2.07 has introduced hardware_subarch ID in the boot
parameters provided by FW. We use it to identify Moorestown platforms.

[ tglx: Cleanup and paravirt fix ]

Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31 11:09:40 +02:00
Jan Beulich 78b89ecd73 i386: Fix section mismatches for init code with !HOTPLUG_CPU
Commit 0e83815be7 changed the
section the initial_code variable gets allocated in, in an
attempt to address a section conflict warning. This, however
created a new section conflict when building without
HOTPLUG_CPU. The apparently only (reasonable) way to address
this is to always use __REFDATA.

Once at it, also fix a second section mismatch when not using
HOTPLUG_CPU.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4A8AE7CD020000780001054B@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18 17:52:35 +02:00
Robert Richter 0e83815be7 x86: fix section mismatch for i386 init code
Startup code for i386 in arch/x86/kernel/head_32.S is using the
reference variable initial_code that is located in the .cpuinit.data
section. If CONFIG_HOTPLUG_CPU is enabled, startup code is not in an
init section and can be called later too. In this case the reference
initial_code must be kept too. This patch fixes this. See below for
the section mismatch warning.

 WARNING: vmlinux.o(.cpuinit.data+0x0): Section mismatch in reference
 from the variable initial_code to the function
 .init.text:i386_start_kernel()
 The variable __cpuinitdata initial_code references
 a function __init i386_start_kernel().
 If i386_start_kernel is only used by initial_code then
 annotate i386_start_kernel with a matching annotation.

Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1248716632-26844-1-git-send-email-robert.richter@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-27 14:18:46 -07:00
Alexander van Heukelum bc3f5d3dbd x86: de-assembler-ize asm/desc.h
asm/desc.h is included in three assembly files, but the only macro
it defines, GET_DESC_BASE, is never used. This patch removes the
includes, removes the macro GET_DESC_BASE and the ASSEMBLY guard
from asm/desc.h.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-17 21:35:10 -07:00
Sam Ravnborg dfc20895d9 x86, vmlinux.lds: unify .text output sections
32 bit x86 had a dedicated .text.head output section,
whereas 64 bit had it all in a single output section.

In the unified version the dedicated .text.head output section
was kept to have full control over the head code.

32 bit:

- Moved definition of _stext to the linker script.
  The definition is located _after_ .text.page_aligned as this
  is what 32 bit did before.

The ALIGN(8) was introduced so we hit the exact same address
(on the tested config) before and after the move.

I assume that it is a bug that _stext did not cover the
.text.page_aligned section - if this is true it can be fixed
in a follow-up patch (and the ugly ALIGN() can be dropped).

[ Impact: 64-bit: cleanup, 32-bit: use the 64-bit linker script ]

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tim Abbott <tabbott@MIT.EDU>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1240991249-27117-5-git-send-email-sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 10:20:31 +02:00
H. Peter Anvin 60ac982139 x86-32: tighten the bound on additional memory to map
Impact: Tighten bound to avoid masking errors

The definition of MAPPING_BEYOND_END was excessive; this has a nasty
tendency to mask bugs.  We have learned over time that this kind of
bug hiding can cause some very strange errors.  Therefore, tighten the
bound to only need to map the actual kernel area.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Yinghai Lu <yinghai@kernel.org>
2009-03-17 11:52:10 -07:00
Jeremy Fitzhardinge b8a22a6273 x86-32: remove ALLOCATOR_SLOP from head_32.S
Impact: cleanup

ALLOCATOR_SLOP is a vestigial remain from when we used the
bootmem allocator to allocate the kernel's linear memory mapping.
Now we directly reserve pages from the e820 mapping, and no
longer require secondary structures to keep track of allocated
pages.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-03-17 11:46:01 -07:00
Jeremy Fitzhardinge c090f532db x86-32: make sure we map enough to fit linear map pagetables
Impact: crash fix

head_32.S needs to map the kernel itself, and enough space so
that mm/init.c can allocate space from the e820 allocator
for the linear map of low memory.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-03-17 11:42:05 -07:00
Yinghai Lu 2bd2753ff4 x86: put initial_pg_tables into .bss
Impact: makes vmlinux section information more useful

Don't use ram after _end blindly for pagetables. aka init pages is before _end
put those pg table into .bss

[Adapted to use brk segment - Jeremy]

v2: keep initial page table up to 512M only.
v4: put initial page tables just before _end

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-14 17:23:47 -07:00
Jeremy Fitzhardinge 796216a57f x86: allow extend_brk users to reserve brk space
Impact: new interface; remove hard-coded limit

Add RESERVE_BRK(name, size) macro to reserve space in the brk
area.  This should be a conservative (ie, larger) estimate of
how much space might possibly be required from the brk area.
Any unused space will be freed, so there's no real downside
on making the reservation too large (within limits).

The name should be unique within a given file, and somewhat
descriptive.

The C definition of RESERVE_BRK() ends up being more complex than
one would expect to work around a cluster of gcc infelicities:

  The first attempt was to simply try putting __section(.brk_reservation)
  on a variable.  This doesn't work because it ends up making it a
  @progbits section, which gets actual space allocated in the vmlinux
  executable.

  The second attempt was to emit the space into a section using asm,
  but gcc doesn't allow arguments to be passed to file-level asm()
  statements, making it hard to pass in the size.

  The final attempt is to wrap the asm() in a function to allow
  it to have arguments, and put the function itself into the
  .discard section, which vmlinux*.lds drops entirely from the
  emitted vmlinux.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-14 17:23:47 -07:00
Yinghai Lu 7543c1de84 x86-32: compute initial mapping size more accurately
Impact: simplification

We only need to map the kernel in head_32.S, not the whole of
lowmem.  We use 512MB as a reasonable (but arbitrary) limit on
the maximum size of the kernel image.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-14 17:23:47 -07:00
Jeremy Fitzhardinge ccf3fe02e3 x86-32: use brk segment for allocating initial kernel pagetable
Impact: use new interface instead of previous ad hoc implementation

Rather than having special purpose init_pg_table_start/end variables
to delimit the kernel pagetable built by head_32.S, just use the brk
mechanism to extend the bss for the new pagetable.

This patch removes init_pg_table_start/end and pg0, defines __brk_base
(which is page-aligned and immediately follows _end), initializes
the brk region to start there, and uses it for the 32-bit pagetable.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-14 17:23:47 -07:00
Jeremy Fitzhardinge 0341c14da4 x86: use _types.h headers in asm where available
In general, the only definitions that assembly files can use
are in _types.S headers (where available), so convert them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-13 11:35:01 -08:00
Ingo Molnar ab639f3593 Merge branch 'core/percpu' into x86/core 2009-02-13 09:45:09 +01:00
Tejun Heo 5c79d2a517 x86: fix x86_32 stack protector bugs
Impact: fix x86_32 stack protector

Brian Gerst found out that %gs was being initialized to stack_canary
instead of stack_canary - 20, which basically gave the same canary
value for all threads.  Fixing this also exposed the following bugs.

* cpu_idle() didn't call boot_init_stack_canary()

* stack canary switching in switch_to() was being done too late making
  the initial run of a new thread use the old stack canary value.

Fix all of them and while at it update comment in cpu_idle() about
calling boot_init_stack_canary().

Reported-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-11 11:33:49 +01:00
Tejun Heo 60a5317ff0 x86: implement x86_32 stack protector
Impact: stack protector for x86_32

Implement stack protector for x86_32.  GDT entry 28 is used for it.
It's set to point to stack_canary-20 and have the length of 24 bytes.
CONFIG_CC_STACKPROTECTOR turns off CONFIG_X86_32_LAZY_GS and sets %gs
to the stack canary segment on entry.  As %gs is otherwise unused by
the kernel, the canary can be anywhere.  It's defined as a percpu
variable.

x86_32 exception handlers take register frame on stack directly as
struct pt_regs.  With -fstack-protector turned on, gcc copies the
whole structure after the stack canary and (of course) doesn't copy
back on return thus losing all changed.  For now, -fno-stack-protector
is added to all files which contain those functions.  We definitely
need something better.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-10 00:42:01 +01:00
Ingo Molnar 74b6eb6b93 Merge branches 'x86/asm', 'x86/cleanups', 'x86/cpudetect', 'x86/debug', 'x86/doc', 'x86/header-fixes', 'x86/mm', 'x86/paravirt', 'x86/pat', 'x86/setup-v2', 'x86/subarch', 'x86/uaccess' and 'x86/urgent' into x86/core 2009-01-28 23:13:53 +01:00
Ingo Molnar d5e397cb49 x86: improve early fault/irq printout
Impact: add a stack dump to early IRQs/faults

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26 14:22:00 +01:00
Ingo Molnar 34707bcd04 x86, debug: remove early_printk() #ifdefs from head_32.S
Impact: cleanup

Remove such constructs:

 #ifdef CONFIG_EARLY_PRINTK
        call early_printk
 #else
        call printk
 #endif

Not only are they ugly, they are also pointless: a call to printk()
maps to early_printk during early bootup anyway, if CONFIG_EARLY_PRINTK
is enabled.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26 14:18:43 +01:00
Brian Gerst 0dd76d736e x86: set %fs to __KERNEL_PERCPU unconditionally for x86_32
Impact: cleanup

%fs is currently set to __KERNEL_DS at boot, and conditionally
switched to __KERNEL_PERCPU for secondary cpus.  Instead, initialize
GDT_ENTRY_PERCPU to the same attributes as GDT_ENTRY_KERNEL_DS and
set %fs to __KERNEL_PERCPU unconditionally.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-21 17:26:05 +09:00
Suresh Siddha b2bc273146 x86, cpa: rename PTE attribute macros for kernel direct mapping in early boot
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: arjan@linux.intel.com
Cc: venkatesh.pallipadi@intel.com
Cc: jeremy@goop.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-10 19:29:11 +02:00
Thomas Gleixner 583323b9d2 x86: fix cpu hotplug on 32bit
commit 3e9704739d ("x86: boot secondary
cpus through initial_code") causes the kernel to crash when a CPU is
brought online after the read only sections have been write
protected. The write to initial_code in do_boot_cpu() fails.

Move inital_code to .cpuinit.data section.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
2008-07-27 21:43:11 +02:00
Glauber Costa 3e9704739d x86: boot secondary cpus through initial_code
remove "initialize_secondary". Boot both architectures via
initial_code.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:48:18 +02:00
Glauber Costa e3f77edfc1 x86: use initial_code for i386
x86_64 jumps to whatever is written in "initial_code" symbol,
instead of a fixed address. Do it for i386 too. It will allow us
to integrate more of the smp boot code.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:48:17 +02:00
Ingo Molnar 896395c290 Merge branch 'linus' into tmp.x86.mpparse.new 2008-07-08 10:32:56 +02:00
Joe Korty 86b2b70e15 x86: fix asm warning in head_32.S
On Mon, May 19, 2008 at 04:10:02PM -0700, Linus Torvalds wrote:
> It also causes these warnings on 32-bit PAE:
>
> 	  AS      arch/x86/kernel/head_32.o
> 	arch/x86/kernel/head_32.S: Assembler messages:
> 	arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed
> 	arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed
>
> and I do not see why (the end result seems to be identical).

Fix head_32.S gcc bignum warnings when CONFIG_PAE=y.

    arch/x86/kernel/head_32.S: Assembler messages:
    arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed
    arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed

The assembler was stumbling over the 64-bit constant 0x100000000 in the
KPMDS #define.

Testing: a cmp(1) on head_32.o before and after shows the binary is unchanged.

Signed-off-by: Joe Korty <joe.korty@ccur.com
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Gabriel C <nix.or.die@googlemail.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: "Pallipadi Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: "Siddha Suresh B" <suresh.b.siddha@intel.com>
Cc: bugme-daemon@bugzilla.kernel.org
Cc: airlied@linux.ie
Cc: "Barnes Jesse" <jesse.barnes@intel.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-12 21:26:12 +02:00
Yinghai Lu 6af61a7614 x86: clean up max_pfn_mapped usage - 32-bit
on 32-bit in head_32.S after initial page table is done, we get initial
max_pfn_mapped, and then kernel_physical_mapping_init will give us
a final one.

We need to use that to make sure find_e820_area will get valid addresses
for boot_map and for NODE_DATA(0) on numa32.

XEN PV and lguest may need to assign max_pfn_mapped too.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-03 13:26:28 +02:00
Yinghai Lu f0d43100f1 x86: extend e820 early_res support 32bit -fix #3
introduce init_pg_table_start, so xen PV could specify the value.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-31 09:55:47 +02:00
Vegard Nossum 575ca7351b x86: fix early-BUG message
The .asciz directive takes any number of strings, but each one is zero-
terminated, and string pasting is not done as in C. That results in only the
first line being output.

Replace .asciz with multiple .ascii directives and terminate with .asciz.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30 23:15:34 +02:00
WANG Cong cf9b111c17 x86: remove pointless comments
Remove old comments that include the old arch/i386 directory.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:54 +02:00
Eric W. Biederman 700efc1b9f x86: introduce kernel/head32.c
Copy x86_64 and add a head32.c so we can start moving early
architecture initialization out of assembly.

[ Sam Ravnborg <sam@ravnborg.org>: updated it to x86 ]

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:49 +02:00
Jiri Slaby e215f3c2c5 x86: fix fault_msg nul termination
The fault_msg text is not explictly nul terminated now in startup
assembly. Do so by converting .ascii to .asciz.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21 17:06:15 +01:00
Adrian Bunk ed2b7e2b1d x86: don't make swapper_pg_pmd global
There doesn't seem to be any reason for swapper_pg_pmd being global.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-26 12:55:58 +01:00
Adrian Bunk aa65af3f92 x86: don't make swapper_pg_fixmap global
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: hpa@zytor.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-19 16:18:29 +01:00
Ian Campbell 551889a6e2 x86: construct 32-bit boot time page tables in native format.
Specifically the boot time page tables in a CONFIG_X86_PAE=y enabled
kernel are in PAE format.

early_ioremap is updated to use the standard page table accessors.

Clear any mappings beyond max_low_pfn from the boot page tables in
native_pagetable_setup_start because the initial mappings can extend
beyond the range of physical memory and into the vmalloc area.

Derived from patches by Eric Biederman and H. Peter Anvin.

[ jeremy@goop.org: PAE swapper_pg_dir needs to be page-sized fix ]

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:09 +01:00
Sam Ravnborg 8b2f7ffffe x86: fix Section mismatch: reference to .init.text:lguest_entry
fix:

> WARNING: vmlinux.o(.data+0x4): Section mismatch: reference to .init.text:lguest_entry (between 'subarch_entries' and 'stack_start')

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:28 +01:00
Ian Campbell 5756dd59f1 x86_32: always run the full set of paging state.
I am preparing to convert the boot time page table to the kernels
native format.  To achieve that I need to enable PAE. Enabling PSE
and the no execute bit would not hurt.  So this patch modifies
the boot cpu path to execute all of the kernels enable code
if and only if we have the proper bits set in mmu_cr4_features.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:27 +01:00
Ian Campbell 503595010f x86_32: remove unnecessary use of %ebx as the boot cpu flag
Currently in head_32.S there are two ways we test to see if we
are the boot cpu.  By looking at %ebx and by looking at the
static variable ready.  When changing things around I have
found that it gets tricky to preserve %ebx.  So this
patch just switches head.S over to the more reliable
test of always using ready.

Hopefully later we can kill these tests entirely.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:27 +01:00
Ingo Molnar 94878efdd0 x86: early fault debugging improvement
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:09 +01:00
Rusty Russell 476c6c11a9 fix lguest rmmod "bad pgd"
After 17d57a9206 ("x86: fix x86-32 early
fixmap initialization.") removing lg.ko caused a printk from vunmap:

	mm/memory.c:115: bad pgd 004b3027.

On the second use after module load, the kernel crashes.

This fixes the immediate problem (accessed and dirty bits not set as
expected in pmd_none_or_clear_bad).  I can't see why this would cause
a crash, but I haven't been able to reproduce it once this is applied.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-01 11:30:35 -08:00
Eric W. Biederman 17d57a9206 x86: fix x86-32 early fixmap initialization.
pageexec@freemail.hu writes:

> i've just noticed that the chunk in i386/kernel/head.S ended up in a
> weird place, namely, it's not going to be executed as it's just after
> a 'jmp 3f' and before startup_32_smp, probably not what you intended.
> on a sidenote, the whole thing can be done in a single insn, like:
>
> movl $(swapper_pg_pmd - __PAGE_OFFSET + 0x067), (swapper_pg_dir -
> __PAGE_OFFSET+ 4092)

Thanks for the reminder I thought we had fixed this problem a while ago.

Needed to get fixed virtual address for USB debug and earlycon with mmio.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-03 17:17:10 +01:00
H. Peter Anvin fa76dab935 x86: clean up setup.h and the boot code
Make <asm/setup.h> usable by the boot code.

Clean up vestiges of the old command-line protocol from setup.h and
head_32.S (it is still supported from the boot loader point of
view, since it is converted to the new command-line protocol by the
boot code.)

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23 22:37:25 +02:00