Checking for ifdef CONFIG_x fails if CONFIG_x=m. Use IS_ENABLED
that is true for both built-ins and modules, instead. Required
when building coresight components as modules.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define a MODULE_DEVICE_TABLE for cpu_debug so module can
be auto loaded on boot.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide name of cpu_debug module in Kconfig help section.
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initialisation code checks TRCIDR4 to determine the number of resource
selectors available on the system. Since ETM v 4.3, the value 0 has a
different meaning. This patch takes into account this change.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
[Removed '.' in patch title, added stable]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-17-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The member @nr_resource represents how many resource selector pairs,
and the pair 0 is always implemented and reserved.
So let's multiply by 2 when resetting the selector configuration.
And also update the validation of the input @idx.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
[Fixed typographical error in changelog, added stable]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coresight driver assumes sink is common across all the ETMs,
and tries to build a path between ETM and the first enabled
sink found using bus based search. This breaks sysFS usage
on implementations that has multiple per core sinks in
enabled state.
To fix this, coresight_get_enabled_sink API is updated to
do a connection based search starting from the given source,
instead of bus based search.
With sink selection using sysfs depecrated for perf interface,
provision for reset is removed as well in this API.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
[Fixed indentation problem and removed obsolete comment]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using the perf interface, sink selection using sysfs is
deprecated.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TRCSEQEVR(3) is reserved, using '@nrseqstate - 1' instead to avoid
accessing the reserved register.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
[Fixed capital letter in title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the specified/hinted sink is not reachable from a subset of the CPUs,
we could end up unable to trace the event on those CPUs. This
is the best effort we could do until we support 1:1 configurations.
Fail gracefully in such cases avoiding a WARN_ON, which can be easily
triggered by the user on certain platforms (Arm N1SDP), with the following
trace paths :
CPU0
\
-- Funnel0 --> ETF0 -->
/ \
CPU1 \
MainFunnel
CPU2 /
\ /
-- Funnel1 --> ETF1 -->
/
CPU1
$ perf record --per-thread -e cs_etm/@ETF0/u -- <app>
could trigger the following WARNING, when the event is scheduled
on CPU2.
[10919.513250] ------------[ cut here ]------------
[10919.517861] WARNING: CPU: 2 PID: 24021 at
drivers/hwtracing/coresight/coresight-etm-perf.c:316 etm_event_start+0xf8/0x100
...
[10919.564403] CPU: 2 PID: 24021 Comm: perf Not tainted 5.8.0+ #24
[10919.570308] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[10919.575865] pc : etm_event_start+0xf8/0x100
[10919.580034] lr : etm_event_start+0x80/0x100
[10919.584202] sp : fffffe001932f940
[10919.587502] x29: fffffe001932f940 x28: fffffc834995f800
[10919.592799] x27: 0000000000000000 x26: fffffe0011f3ced0
[10919.598095] x25: fffffc837fce244c x24: fffffc837fce2448
[10919.603391] x23: 0000000000000002 x22: fffffc8353529c00
[10919.608688] x21: fffffc835bb31000 x20: 0000000000000000
[10919.613984] x19: fffffc837fcdcc70 x18: 0000000000000000
[10919.619281] x17: 0000000000000000 x16: 0000000000000000
[10919.624577] x15: 0000000000000000 x14: 00000000000009f8
[10919.629874] x13: 00000000000009f8 x12: 0000000000000018
[10919.635170] x11: 0000000000000000 x10: 0000000000000000
[10919.640467] x9 : fffffe00108cd168 x8 : 0000000000000000
[10919.645763] x7 : 0000000000000020 x6 : 0000000000000001
[10919.651059] x5 : 0000000000000002 x4 : 0000000000000001
[10919.656356] x3 : 0000000000000000 x2 : 0000000000000000
[10919.661652] x1 : fffffe836eb40000 x0 : 0000000000000000
[10919.666949] Call trace:
[10919.669382] etm_event_start+0xf8/0x100
[10919.673203] etm_event_add+0x40/0x60
[10919.676765] event_sched_in.isra.134+0xcc/0x210
[10919.681281] merge_sched_in+0xb0/0x2a8
[10919.685017] visit_groups_merge.constprop.140+0x15c/0x4b8
[10919.690400] ctx_sched_in+0x15c/0x170
[10919.694048] perf_event_sched_in+0x6c/0xa0
[10919.698130] ctx_resched+0x60/0xa0
[10919.701517] perf_event_exec+0x288/0x2f0
[10919.705425] begin_new_exec+0x4c8/0xf58
[10919.709247] load_elf_binary+0x66c/0xf30
[10919.713155] exec_binprm+0x15c/0x450
[10919.716716] __do_execve_file+0x508/0x748
[10919.720711] __arm64_sys_execve+0x40/0x50
[10919.724707] do_el0_svc+0xf4/0x1b8
[10919.728095] el0_sync_handler+0xf8/0x124
[10919.732003] el0_sync+0x140/0x180
Even though we don't support using separate sinks for the ETMs yet (e.g,
for 1:1 configurations), we should at least honor the user's choice and
handle the limitations gracefully, by simply skipping the tracing on ETMs
which can't reach the requested sink.
Fixes: f9d81a657b ("coresight: perf: Allow tracing on hotplugged CPUs")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deadlock as below is triggered by one CPU holds drvdata->spinlock
and calls cti_enable_hw(). Smp_call_function_single() is called
in cti_enable_hw() and tries to let another CPU write CTI registers.
That CPU is trying to get drvdata->spinlock in cti_cpu_pm_notify()
and doesn't response to IPI from smp_call_function_single().
[ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L
5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1
[ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT)
[ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--)
[ 988.357689] pc : smp_call_function_single+0x158/0x1b8
[ 988.362782] lr : smp_call_function_single+0x124/0x1b8
...
[ 988.451638] Call trace:
[ 988.454119] smp_call_function_single+0x158/0x1b8
[ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti]
[ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128 [coresight]
[ 988.469855] coresight_enable+0x1f0/0x364 [coresight]
[ 988.474957] enable_source_store+0x5c/0x9c [coresight]
[ 988.480140] dev_attr_store+0x14/0x28
[ 988.483839] sysfs_kf_write+0x38/0x4c
[ 988.487532] kernfs_fop_write+0x1c0/0x2b0
[ 988.491585] vfs_write+0xfc/0x300
[ 988.494931] ksys_write+0x78/0xe0
[ 988.498283] __arm64_sys_write+0x18/0x20
[ 988.502240] el0_svc_common+0x98/0x160
[ 988.506024] do_el0_svc+0x78/0x80
[ 988.509377] el0_sync_handler+0xd4/0x270
[ 988.513337] el0_sync+0x164/0x180
This change write CTI registers directly in cti_enable_hw().
Config->hw_powered has been checked to be true with spinlock holded.
CTI is powered and can be programmed until spinlock is released.
Fixes: 6a0953ce7d ("coresight: cti: Add CPU idle pm notifer to CTI devices")
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
[Re-ordered variable declaration]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The member @nr_addr_cmp is not a bool value, using operator '>'
instead to avoid unexpected failure.
Fixes: a77de2637c ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moving from using an address filter to trace the default "all addresses"
range to no filtering to acheive the same result, has caused the perf
filtering of kernel/user address spaces from not working unless an
explicit address filter was used.
This is due to the original code using a side-effect of the address
filtering rather than setting the global TRCVICTLR exception level
filtering.
The use of the mode sysfs file is also similarly affected.
A helper function is added to fix both instances.
Fixes: ae2041510d ("coresight: etmv4: Update default filter and initialisation")
Reported-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STP_PACKET_MARKED is not supported by STM currently.
Add STM_FLAG_MARKED to support marked packet in STM.
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
etm4_count keeps track of number of ETMv4 registered and on some systems,
a race is observed on etm4_count variable which can lead to multiple calls
to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls
cpuhp_store_callbacks() which prevents multiple registrations of callbacks
for a given state and due to this race, it returns -EBUSY leading to ETM
probe failures like below.
coresight-etm4x: probe of 7040000.etm failed with error -16
This race can easily be triggered with async probe by setting probe type
as PROBE_PREFER_ASYNCHRONOUS and with ETM power management property
"arm,coresight-loses-context-with-cpu".
Prevent this race by moving cpuhp callbacks to etm driver init since the
cpuhp callbacks doesn't have to depend on the etm4_count and can be once
setup during driver init. Similarly we move cpu_pm notifier registration
to driver init and completely remove etm4_count usage. Also now we can
use non cpuslocked version of cpuhp callbacks with this movement.
Fixes: 9b6a3f3633 ("coresight: etmv4: Fix CPU power management setup in probe() function")
Fixes: 58eb457be0 ("hwtracing/coresight-etm4x: Convert to hotplug state machine")
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ETM state save/restore incorrectly reads/writes some of the 64bit
registers (e.g, address comparators, vmid/cid comparators etc.) using
32bit accesses. Ensure we use the appropriate width accessors for
the registers.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-18-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add default sink selection to the perf trace handling in the etm driver.
Uses the select default sink infrastructure to select a sink for the perf
session, if no other sink is specified.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-17-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An additional sink subtype is added to differentiate ETB/ETF buffer
sinks and ETR type system memory sinks.
This allows the prioritised selection of default sinks.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a method to select a suitable sink connected to a given source.
In cases where no sink is defined, the coresight_find_default_sink
routine can search from a given source, through the child connections
until a suitable sink is found.
The suitability is defined in by the sink coresight_dev_subtype on the
CoreSight device, and the distance from the source by counting
connections.
Higher value subtype is preferred - where these are equal, shorter
distance from source is used as a tie-break.
This allows for default sink to be discovered were none is specified
(e.g. perf command line)
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement a shutdown callback to ensure ETR hardware is
properly shutdown in reboot/shutdown path. This is required
for ETR which has SMMU address translation enabled like on
SC7180 SoC and few others. If the hardware is still accessing
memory after SMMU translation is disabled as part of SMMU
shutdown callback in system reboot or shutdown path, then
IOVAs(I/O virtual address) which it was using will go on the
bus as the physical addresses which might result in unknown
crashes (NoC/interconnect errors). So we make sure from this
shutdown callback that the ETR is shutdown before SMMU translation
is disabled and device_link in SMMU driver will take care of
ordering of shutdown callbacks such that SMMU shutdown callback
is not called before any of its consumer shutdown callbacks.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The counter value registers change during operation, however this change
is not reflected in the values seen by the user in sysfs.
This fixes the issue by reading back the values on disable.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: 2e1cdfe184 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ETMv4 max resource selector constant incorrectly set to 16. Updated to the
correct 32 value, and adjustments made to limited code using it.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: 2e1cdfe184 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some QCOM SoCs, replicators in Always-On domain loses its
context as soon as the clock is disabled. Currently as a part
of pm_runtime workqueue, clock is disabled after the replicator
is initialized by amba_pm_runtime_suspend assuming that context
is not lost which is not true for replicators with such
limitations. So add a new property "qcom,replicator-loses-context"
to identify such replicators and reset them.
Suggested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some Qualcomm Technologies Inc. SoCs like SC7180, there
exists a hardware errata where the APSS (Application Processor
SubSystem)/CPU watchdog counter is stopped when the trace unit
power up ETM register is set (TRCPDCR.PU = 1). Since the ETMs
share the same power domain as that of respective CPU cores,
they are powered on when the CPU core is powered on. So we can
skip powering up of trace unit after checking for this errata
via new property called "qcom,skip-power-up".
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Co-developed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use CS_AMBA_ID macro for coresight catu AMBA id table
instead of open coding.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use CS_AMBA_ID macro for dynamic replicator AMBA id table
instead of open coding.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current probe() function calls a pair of cpuhp_xxx API functions to
setup CPU hotplug handling. The hotplug lock is held for the duration of
the two calls and other CPU related code using cpus_read_lock() /
cpus_read_unlock() calls.
The problem is that on error states, goto: statements bypass the
cpus_read_unlock() call. This code has increased in complexity as the
driver has developed.
This patch introduces a pair of helper functions etm4_pm_setup_cpuslocked()
and etm4_pm_clear() which correct the issues above and group the PM code a
little better.
The two functions etm4_cpu_pm_register() and etm4_cpu_pm_unregister() are
dropped as these call cpu_pm_register_notifier() / ..unregister_notifier()
dependent on CONFIG_CPU_PM - but this define is used to nop these functions
out in the pm headers - so the wrapper functions are superfluous.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Fixes: e9f5d63f84 ("hwtracing/coresight-etm4x: Use cpuhp_setup_state_nocalls_cpuslocked()")
Fixes: 58eb457be0 ("hwtracing/coresight-etm4x: Convert to hotplug state machine")
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200701160852.2782823-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There were a couple problems with error handling in the probe function:
1) If the "drvdata" allocation failed then it lead to a NULL
dereference.
2) On several error paths we decremented "nr_cti_cpu" before it was
incremented which lead to a reference counting bug.
There were also some parts of the error handling which were not bugs but
were messy. The error handling was confusing to read. It printed some
unnecessary error messages.
The simplest way to fix these problems was to create a cti_pm_setup()
function that did all the power management setup in one go. That way
when we call cti_pm_release() we don't have to deal with the
complications of a partially configured power management config.
I reversed the "if (drvdata->ctidev.cpu >= 0)" condition in
cti_pm_release() so that it mirros the new cti_pm_setup() function.
Fixes: 6a0953ce7d ("coresight: cti: Add CPU idle pm notifer to CTI devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200701160852.2782823-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
i5RblCmcVMqvHaGtYkY+
=tScN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
set from Mauro toward the completion of the RST conversion. I *really*
hope we are getting close to the end of this. Meanwhile, those patches
reach pretty far afield to update document references around the tree;
there should be no actual code changes there. There will be, alas, more of
the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots of
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
+NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
=fDC/
-----END PGP SIGNATURE-----
Merge tag 'docs-5.8' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
Adds a notify callback for CPU PM events to the CTI driver - for
CPU bound CTI devices.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-24-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds registration of CPU start and stop functions to CPU hotplug
mechanisms - for any CPU bound CTI.
Sets CTI powered flag according to state.
Will enable CTI on CPU start if there are existing enable requests.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-23-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't need to cast void pointers, such as the amba_id data. Assign to
a local variable to make the code prettier and also return NULL instead
of 0 to make sparse happy.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Joe Perches <joe@perches.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-21-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should include headers that C files use in the C files that use them
and avoid relying on implicit includes as much as possible. This helps
avoid compiler errors in the future about missing declarations when
header files change includes in the future.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-20-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse gets annoyed when this initializer is 0 but the first struct
member is a pointer. Just use { } to initialize instead so that sparse
is quiet.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-19-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These variables are assigned again before they're used. Leave them
unassigned at first so that the compiler can detect problems in the
future with use before initialization.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-18-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These functions aren't used outside the file they're in. Mark them
static to indicate as such and silence tools like sparse.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[Dropped changes in coresight-cti.c and coresight-etb10.c]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-17-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add PID for Arm Neoverse N1 ETM to the list of supported/known ETMs.
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Differing default states set on driver init / perf init and as a result
of a sysfs reset.
The ETMv4 can be programmed to trace the entire instruction address range
without the need to use address comparator filter resources.
(Described in the ETMv4.x technical reference manual)
sysfs reset was using this method, perf and default driver init were setup
with an address range comparator for the entire address range.
The perf / driver init has been altered to use the method without needing
any comparator address hardware.
Minor adjustment to the vinst_ctrl register initialisation to ensure
correct zero initialisation.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some QCOM platforms like SC7180, SDM845 and SM8150,
reading TMC mode register without proper coresight power
management can lead to async exceptions like the one in
the call trace below in tmc_read_prepare_etb(). This can
happen if the user tries to read the TMC etf data via
device node without setting up source and the sink first.
Fix this by having a check for coresight sysfs mode
before reading TMC mode management register.
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 7 PID: 2605 Comm: hexdump Tainted: G S 5.4.30 #122
Call trace:
dump_backtrace+0x0/0x188
show_stack+0x20/0x2c
dump_stack+0xdc/0x144
panic+0x168/0x36c
panic+0x0/0x36c
arm64_serror_panic+0x78/0x84
do_serror+0x130/0x138
el1_error+0x84/0xf8
tmc_read_prepare_etb+0x88/0xb8
tmc_open+0x40/0xd8
misc_open+0x120/0x158
chrdev_open+0xb8/0x1a4
do_dentry_open+0x268/0x3a0
vfs_open+0x34/0x40
path_openat+0x39c/0xdf4
do_filp_open+0x90/0x10c
do_sys_open+0x150/0x3e8
__arm64_compat_sys_openat+0x28/0x34
el0_svc_common+0xa8/0x160
el0_svc_compat_handler+0x2c/0x38
el0_svc_compat+0x8/0x10
Fixes: 4525412a50 ("coresight: tmc: making prepare/unprepare functions generic")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some systems the firmware may not describe all the ports
connected to a component (e.g, for security reasons). This
could be especially problematic for "funnels" where we could
end up in modifying memory beyond the allocated space for
refcounts.
e.g, for a funnel with input ports listed 0, 3, 5, nr_inport = 3.
However the we could access refcnts[5] while checking for
references, like :
[ 526.110401] ==================================================================
[ 526.117988] BUG: KASAN: slab-out-of-bounds in funnel_enable+0x54/0x1b0
[ 526.124706] Read of size 4 at addr ffffff8135f9549c by task bash/1114
[ 526.131324]
[ 526.132886] CPU: 3 PID: 1114 Comm: bash Tainted: G S 5.4.25 #232
[ 526.140397] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT)
[ 526.147113] Call trace:
[ 526.149653] dump_backtrace+0x0/0x188
[ 526.153431] show_stack+0x20/0x2c
[ 526.156852] dump_stack+0xdc/0x144
[ 526.160370] print_address_description+0x3c/0x494
[ 526.165211] __kasan_report+0x144/0x168
[ 526.169170] kasan_report+0x10/0x18
[ 526.172769] check_memory_region+0x1a4/0x1b4
[ 526.177164] __kasan_check_read+0x18/0x24
[ 526.181292] funnel_enable+0x54/0x1b0
[ 526.185072] coresight_enable_path+0x104/0x198
[ 526.189649] coresight_enable+0x118/0x26c
...
[ 526.237782] Allocated by task 280:
[ 526.241298] __kasan_kmalloc+0xf0/0x1ac
[ 526.245249] kasan_kmalloc+0xc/0x14
[ 526.248849] __kmalloc+0x28c/0x3b4
[ 526.252361] coresight_register+0x88/0x250
[ 526.256587] funnel_probe+0x15c/0x228
[ 526.260365] dynamic_funnel_probe+0x20/0x2c
[ 526.264679] amba_probe+0xbc/0x158
[ 526.268193] really_probe+0x144/0x408
[ 526.271970] driver_probe_device+0x70/0x140
...
[ 526.316810]
[ 526.318364] Freed by task 0:
[ 526.321344] (stack is not available)
[ 526.325024]
[ 526.326580] The buggy address belongs to the object at ffffff8135f95480
[ 526.326580] which belongs to the cache kmalloc-128 of size 128
[ 526.339439] The buggy address is located 28 bytes inside of
[ 526.339439] 128-byte region [ffffff8135f95480, ffffff8135f95500)
[ 526.351399] The buggy address belongs to the page:
[ 526.356342] page:ffffffff04b7e500 refcount:1 mapcount:0 mapping:ffffff814b00c380 index:0x0 compound_mapcount: 0
[ 526.366711] flags: 0x4000000000010200(slab|head)
[ 526.371475] raw: 4000000000010200 ffffffff05034008 ffffffff0501eb08 ffffff814b00c380
[ 526.379435] raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000
[ 526.387393] page dumped because: kasan: bad access detected
[ 526.393128]
[ 526.394681] Memory state around the buggy address:
[ 526.399619] ffffff8135f95380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.407046] ffffff8135f95400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.414473] >ffffff8135f95480: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.421900] ^
[ 526.426029] ffffff8135f95500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.433456] ffffff8135f95580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.440883] ==================================================================
To keep the code simple, we now track the maximum number of
possible input/output connections to/from this component
@ nr_inport and nr_outport in platform_data, respectively.
Thus the output connections could be sparse and code is
adjusted to skip the unspecified connections.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following sparse warning:
drivers/hwtracing/coresight/coresight-etb10.c:720:30: warning: symbol
'coresight_etb_groups' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following sparse warning:
drivers/hwtracing/coresight/coresight-cti.c:22:1: warning: symbol
'ect_net' was not declared. Should it be static?
drivers/hwtracing/coresight/coresight-cti.c:625:32: warning: symbol
'cti_ops_ect' was not declared. Should it be static?
drivers/hwtracing/coresight/coresight-cti.c:630:28: warning: symbol
'cti_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the AMBA ETM PIDs with UCI IDs to avoid future
conflicts when adding the CTI support for QCOM Kryo385
CPU cores.
Fixes: 17b4add0d4 ("coresight: etm4x: Add ETM PIDs for SDM845 and MSM8996")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add ETM UCI IDs for Qualcomm SC7180 SoC. It has 2
big CPU cores based on Cortex-A76 and 6 LITTLE CPU
cores based on Cortex-A55.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds in sysfs links for connections where the connected device is another
coresight device. This allows examination of the coresight topology.
Non-coresight connections remain just as a reference name.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coresight device connections are a bit complicated and is not
exposed currently to the user. One has to look at the platform
descriptions (DT bindings or ACPI bindings) to make an understanding.
Given the new naming scheme, it will be helpful to have this information
to choose the appropriate devices for tracing. This patch exposes
the device connections via links in the sysfs directories.
e.g, for a connection devA[OutputPort_X] -> devB[InputPort_Y]
is represented as two symlinks:
/sys/bus/coresight/.../devA/out:X -> /sys/bus/coresight/.../devB
/sys/bus/coresight/.../devB/in:Y -> /sys/bus/coresight/.../devA
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Revised to use the generic sysfs links functions & link structures.
Provides a connections sysfs group in each device to hold the links.]
Co-developed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To allow the connections between coresight components to be represented
in sysfs, generic methods for creating sysfs links between two coresight
devices are added.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Handle failures in fixing up connections for a newly registered
device. This will be useful to handle cases where we fail to expose
the links via sysfs for the connections.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we prepare to expose the links between the devices in
sysfs, pass the coresight_device instance to the
coresight_release_platform_data in order to free up the connections
when the device is removed.
No functional changes as such in this patch.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fwnode_find_reference() doesn't return NULL and hence that check
should be avoided.
Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200507053547.13707-1-calvin.johnson@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several references got broken due to txt to ReST conversion.
Several of them can be automatically fixed with:
scripts/documentation-file-ref-check --fix
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # hwtracing/coresight/Kconfig
Reviewed-by: Paul E. McKenney <paulmck@kernel.org> # memory-barrier.txt
Acked-by: Alex Shi <alex.shi@linux.alibaba.com> # translations/zh_CN
Acked-by: Federico Vaga <federico.vaga@vaga.pv.it> # translations/it_IT
Acked-by: Marc Zyngier <maz@kernel.org> # kvm/arm64
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6f919ddb83a33b5f2a63b6b5f0575737bb2b36aa.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Some use cases prefer to keep collecting the trace data into the last
available window while the other windows are being offloaded instead of
stopping the trace. In this scenario, the window switch happens
automatically when the next window becomes available again.
Add an option to allow this and a sysfs attribute to enable it.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200319085152.52183-1-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dynamically adds sysfs attributes for all connections defined in the CTI.
Each connection has a triggers<N> sub-directory with name, in_signals,
in_types, out_signals and out_types as read-only parameters in the
directory. in_ or out_ parameters may be omitted if there are no in or
out signals for the connection.
Additionally each device has a nr_cons in the connections sub-directory.
This allows clients to explore the connection and trigger signal details
without needing to refer to device tree or specification of the device.
Standardised type information is provided for certain common functions -
e.g. snk_full for a trigger from a sink indicating full. Otherwise type
defaults to genio.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CoreSight subsystem enables a path of devices from source to sink.
Any CTI devices associated with the path devices must be enabled at the
same time.
This patch adds an associated coresight_device element to the main
coresight device structure, and uses this to create associations between
the CTI and other devices based on the device tree data. The associated
device element is used to enable CTI in conjunction with the path elements.
CTI devices are reference counted so where a single CTI is associated with
multiple elements on the path, it will be enabled on the first associated
device enable, and disabled with the last associated device disable.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds support for CTIs whose connections are implementation defined at
hardware design time, and not constrained by v8 architecture.
These CTIs have no standard connection setup, all the settings have to
be defined in the device tree files. The patch creates a set of connections
and trigger signals based on the information provided.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The v8 architecture defines the relationship between a PE, its optional ETM
and a CTI. Unlike non-architectural CTIs which are implementation defined,
this has a fixed set of connections which can therefore be represented as a
simple tag in the device tree.
This patch defines the tags needed to create an entry for this PE/ETM/CTI
relationship, and provides functionality to implement the connection model
in the CTI driver.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a user API to allow programming of CTI by trigger ID and
channel number. This will take the channel and trigger ID supplied
by the user and program the appropriate register values.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds in sysfs programming support for the CTI function register sets.
Allows direct manipulation of channel / trigger association registers.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This introduces a baseline CTI driver and associated configuration files.
Uses the platform agnostic naming standard for CoreSight devices, along
with a generic platform probing method that currently supports device
tree descriptions, but allows for the ACPI bindings to be added once these
have been defined for the CTI devices.
Driver will probe for the device on the AMBA bus, and load the CTI driver
on CoreSight ID match to CTI IDs in tables.
Initial sysfs support for enable / disable provided.
Default CTI interconnection data is generated based on hardware
register signal counts, with no additional connection information.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few places in the driver that end up returning ENOTSUPP to
the user, replace those with EINVAL.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: ba82664c13 ("intel_th: Add Memory Storage Unit driver")
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20200317062215.15598-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The unexpected state warning should only warn on illegal state
transitions. Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 615c164da0 ("intel_th: msu: Introduce buffer interface")
Cc: stable@vger.kernel.org # v5.4+
Link: https://lore.kernel.org/r/20200317062215.15598-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The operands of time_after() are in a wrong order in both instances in
the sys-t driver. Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 39f10239df ("stm class: p_sys-t: Add support for CLOCKSYNC packets")
Fixes: d69d5e8311 ("stm class: Add MIPI SyS-T protocol support")
Cc: stable@vger.kernel.org # v4.20+
Link: https://lore.kernel.org/r/20200317062215.15598-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some versions of Intel TH have an issue that prevents the multi mode of
MSU from working correctly, resulting in no trace data and potentially
stuck MSU pipeline.
Disable multi mode on such devices.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200317062215.15598-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the newly added code in the etm4x driver is inside of an #ifdef,
and some other code is outside of it, leading to a harmless warning when
CONFIG_CPU_PM is disabled:
drivers/hwtracing/coresight/coresight-etm4x.c:68:13: error: 'etm4_os_lock' defined but not used [-Werror=unused-function]
static void etm4_os_lock(struct etmv4_drvdata *drvdata)
^~~~~~~~~~~~
To avoid the warning and simplify the the #ifdef checks, use
IS_ENABLED() instead, so the compiler can drop the unused functions
without complaining.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Fixed capital 'f' in title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191213223107.1484-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit aac8da6517 ("intel_th: msu: Start handling IRQs") implicitly
relies on the use of devm_request_irq() to subsequently free the irqs on
device removal, but in case of the pci_free_irq_vectors() API, the
handlers need to be freed before it is called. Therefore, at the moment
the driver's remove path trips a BUG_ON(irq_has_action()):
> kernel BUG at drivers/pci/msi.c:375!
> invalid opcode: 0000 1 SMP
> CPU: 2 PID: 818 Comm: rmmod Not tainted 5.5.0-rc1+ #1
> RIP: 0010:free_msi_irqs+0x67/0x1c0
> pci_disable_msi+0x116/0x150
> pci_free_irq_vectors+0x1b/0x20
> intel_th_pci_remove+0x22/0x30 [intel_th_pci]
> pci_device_remove+0x3e/0xb0
> device_release_driver_internal+0xf0/0x1c0
> driver_detach+0x4c/0x8f
> bus_remove_driver+0x5c/0xd0
> driver_unregister+0x31/0x50
> pci_unregister_driver+0x40/0x90
> intel_th_pci_driver_exit+0x10/0xad6 [intel_th_pci]
> __x64_sys_delete_module+0x147/0x290
> ? exit_to_usermode_loop+0xd7/0x120
> do_syscall_64+0x57/0x1b0
> entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by explicitly freeing irqs before freeing the vectors. We keep
using the devm_* variants because they are still useful in early error
paths.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: aac8da6517 ("intel_th: msu: Start handling IRQs")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Cc: stable@vger.kernel.org # v5.2+
Link: https://lore.kernel.org/r/20191217115527.74383-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds Intel(R) Trace Hub PCI ID for Comet Lake PCH-V.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191217115527.74383-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
Commit a753bfcfdb ("intel_th: Make the switch allocate its subdevices")
factored out intel_th_subdevice_alloc() from intel_th_populate(), but got
the error path wrong, resulting in two instances of a double put_device()
on a freshly initialized, but not 'added' device.
Fix this by only doing one put_device() in the error path.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: a753bfcfdb ("intel_th: Make the switch allocate its subdevices")
Reported-by: Wen Yang <wenyang@linux.alibaba.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org # v4.14+
Link: https://lore.kernel.org/r/20191120130806.44028-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Tested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191118185207.30441-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Tested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191118185207.30441-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c7fd62bc69 ("stm class: Introduce framing protocol drivers")
forgot to tear down the link between an stm device and its protocol
driver when policy is removed. This leads to an invalid pointer reference
if one tries to write to an stm device after the policy has been removed
and the protocol driver module unloaded, leading to the below splat:
> BUG: unable to handle page fault for address: ffffffffc0737068
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD 3d780f067 P4D 3d780f067 PUD 3d7811067 PMD 492781067 PTE 0
> Oops: 0000 [#1] SMP NOPTI
> CPU: 1 PID: 26122 Comm: cat Not tainted 5.4.0-rc5+ #1
> RIP: 0010:stm_output_free+0x40/0xc0 [stm_core]
> Call Trace:
> stm_char_release+0x3e/0x70 [stm_core]
> __fput+0xc6/0x260
> ____fput+0xe/0x10
> task_work_run+0x9d/0xc0
> exit_to_usermode_loop+0x103/0x110
> do_syscall_64+0x19d/0x1e0
> entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by tearing down the link from an stm device to its protocol
driver when the policy involving that driver is removed.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: c7fd62bc69 ("stm class: Introduce framing protocol drivers")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
CC: stable@vger.kernel.org # v4.20+
Link: https://lore.kernel.org/r/20191114064201.43089-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The second argument should be the lsb and the third argument should be
the msb.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When tracing etm data of multiple threads on multiple cpus through perf
interface, some link devices are shared between paths of different cpus.
It creates race conditions when different cpus wants to enable/disable
the same link device at the same time.
Example 1:
Two cpus want to enable different ports of a coresight funnel, thus
calling the funnel enable operation at the same time. But the funnel
enable operation isn't reentrantable.
Example 2:
For an enabled coresight dynamic replicator with refcnt=1, one cpu wants
to disable it, while another cpu wants to enable it. Ideally we still have
an enabled replicator with refcnt=1 at the end. But in reality the result
is uncertain.
Since coresight devices claim themselves when enabled for self-hosted
usage, the race conditions above usually make the link devices not usable
after many cycles.
To fix the race conditions, this patch uses spinlocks to serialize
enabling/disabling link devices.
Fixes: a06ae8609b ("coresight: add CoreSight core layer framework")
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org> # 5.3
Link: https://lore.kernel.org/r/20191104181251.26732-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coresight hardware is only likely to appear on Arm systems and currently
the core code has Arm-specific barrier operations in it so can't be
built anywhere else so add an explicit dependency saying so. This will
make no practical difference currently due to the way subsystems are
referenced, the subsystem is only pulled in on arm and arm64, so mainly
serves as documentation in case someone wants to increase build
coverage.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An API to control single-shot comparator operation was missing from sysfs.
This adds the parameters to sysfs to allow programming of this feature.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently it is not possible to view the current settings of a given
address comparator without knowing what type it is set to. For example, if
a comparator is set as an addr_start comparator, attempting to read
addr_stop for the same index will result in an error.
addr_cmp_view is added to allow the user to see the current settings of
the indexed address comparator without resorting to trial and error when
the set type is not known.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Context ID and VM ID masks required 2 value inputs, even when the
second value is ignored as insufficient CID / VMID comparators are
implemented.
Permit a single value to be used if that is sufficient to cover all
implemented comparators.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Setting include / exclude on a range had to be done by setting
the bit in 'mode' before setting the range. However, setting this
bit also had the effect of altering the current range as well.
Changed to only set include / exclude setting of a range at the point of
setting that range. Either use a 3rd input parameter as the include exclude
value, or if not present use the current value of 'mode'. Do not change
current range when 'mode' changes.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kim Phillips