Commit Graph

1993 Commits

Author SHA1 Message Date
Mike Frysinger ef0531b2e4 Blackfin: debug-mmrs: fix typo in single dmac setup
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:44 -04:00
Mike Frysinger 50f92aa334 Blackfin: convert to asm-generic/mutex-dec.h for all systems
The Blackfin mutex.h is merely a copy of an older asm-generic/mutex-dec.h,
so punt it and just use the common one directly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:43 -04:00
Mike Frysinger fb1d9be596 Blackfin: optimize double fault boot checking
This moves the double fault data used at boot time into a single struct
which can then easily be addressed with indexed loads rather than having
to explicitly load multiple addresses.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:43 -04:00
Mike Frysinger 072a5cff2f Blackfin: time: replace magic numbers with defines
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:42 -04:00
Mike Frysinger b648072d3e Blackfin: SMP: optimize start up code a bit
This just imports all of the optimization work done in the
common startup code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:42 -04:00
Mike Frysinger 2f7d63f909 Blackfin: boards: clean up redundant/dead spi resources
The default for the Blackfin SPI driver is 8 bits and dma disabled,
so many of the bfin5xx_spi_chip resources are redundant.  So punt
those parts.

Further, drivers should themselves be declaring 16 bit transfers,
so for those that do, and for the ones which no longer do 16 bit
transfers, drop the bfin5xx_spi_chip resources.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:41 -04:00
Mike Frysinger 9be8631b8a Blackfin: net2272: move pin setup to boards files
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:41 -04:00
Mike Frysinger c6cb13f9fe Blackfin: convert to kbuild asm-generic support
No need for one line header stubs.  Just declare it in Kbuild.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 00:41:23 -04:00
Wanlong Gao c7cbb02222 rtc: fix build warnings in defconfigs
RTC_CLASS is changed to bool, so 'm' is invalid.

Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15 20:04:02 -07:00
Steven Miao 5ff6197f82 Blackfin: strncpy: fix handling of zero lengths
The jump to 4f will cause the NUL padding loop to run at least one time,
so if string length is zero just jump to the end.  Otherwise we wrongly
write one NUL byte when size==0.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-03 11:05:36 -04:00
Mike Frysinger c320afe965 Blackfin: debug-mmrs: include RSI_PID[4567] MMRs
The documentation is a little iffy as to whether these are actual MMRs,
but reading them on the hardware works, and the previous version of this
logic (the SDH) had PID[4567].  So add it for RSI too.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:56 -04:00
Mike Frysinger fcb243918f Blackfin: bf51x: fix up RSI_PID# MMR defines
Looks like the copying of MMR defines from the SDH block missed updating
the addresses of the RSI_PID# registers.  So tweak them to reflect the
actual hardware.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:56 -04:00
Mike Frysinger 61aa818f7b Blackfin: bf52x/bf54x: fix up usb MMR defines
The bf52x/bf54x have the incorrect addresses for USB_EP_NI7_RXINTERVAL
and USB_EP_NI7_TXCOUNT, so adjust those.

Further, the bf54x header puts the USB defines in the wrong place, so
shuffle them back to the right grouping.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:56 -04:00
Mike Frysinger d09fb60203 Blackfin: debug-mmrs: fix typos with gptimers/mdma/ppi
This code was mostly developed against a BF54x, so some BF537-specific
issues were missed.

The PPI block starts at PPI_CONTROL, not PPI_STATUS (which is the reverse
of the EPPI block).

The MDMA block starts at MDMA_NEXT_DESC_PTR, not MDMA_CONFIG.  Seems the
sim does not catch misreads here so that'll need to get fixed.

The gptimer block is mostly 32bit regs, not 16bit.  Use the gptimer struct
to figure that out rather than hardcoding it locally.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:56 -04:00
Mike Frysinger a4ffd95692 Blackfin: gptimers: add structure for hardware register layout
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:55 -04:00
Mike Frysinger 427472c967 Blackfin: wire up new sendmmsg syscall
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:55 -04:00
Mike Frysinger 63917efc4f Blackfin: mach/bfin_serial_5xx.h: punt now-unused header
Now that the serial code has been unified in bfin_serial.h, and the
Blackfin UART driver pushed its resources to the boards files, we
don't need these headers anymore.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:01:55 -04:00
Mike Frysinger 091c75985e Blackfin: bfin_serial.h: turn default port wrappers into stubs
Any consumer that needs to access the MMRs has to provide these helpers,
so make the default into useless stubs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:01:55 -04:00
Linus Torvalds c4a227d89f Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  perf: Fix SIGIO handling
  perf top: Don't stop if no kernel symtab is found
  perf top: Handle kptr_restrict
  perf top: Remove unused macro
  perf events: initialize fd array to -1 instead of 0
  perf tools: Make sure kptr_restrict warnings fit 80 col terms
  perf tools: Fix build on older systems
  perf symbols: Handle /proc/sys/kernel/kptr_restrict
  perf: Remove duplicate headers
  ftrace: Add internal recursive checks
  tracing: Update btrfs's tracepoints to use u64 interface
  tracing: Add __print_symbolic_u64 to avoid warnings on 32bit machine
  ftrace: Set ops->flag to enabled even on static function tracing
  tracing: Have event with function tracer check error return
  ftrace: Have ftrace_startup() return failure code
  jump_label: Check entries limit in __jump_label_update
  ftrace/recordmcount: Avoid STT_FUNC symbols as base on ARM
  scripts/tags.sh: Add magic for trace-events for etags too
  scripts/tags.sh: Fix ctags for DEFINE_EVENT()
  x86/ftrace: Fix compiler warning in ftrace.c
  ...
2011-05-28 12:55:55 -07:00
Linus Torvalds 571503e100 Merge branch 'setns'
* setns:
  ns: Wire up the setns system call

Done as a merge to make it easier to fix up conflicts in arm due to
addition of sendmmsg system call
2011-05-28 10:51:01 -07:00
Eric W. Biederman 7b21fddd08 ns: Wire up the setns system call
32bit and 64bit on x86 are tested and working.  The rest I have looked
at closely and I can't find any problems.

setns is an easy system call to wire up.  It just takes two ints so I
don't expect any weird architecture porting problems.

While doing this I have noticed that we have some architectures that are
very slow to get new system calls.  cris seems to be the slowest where
the last system calls wired up were preadv and pwritev.  avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h.  frv is
behind with perf_event_open being the last syscall wired up.  On h8300
the last system call wired up was epoll_wait.  On m32r the last system
call wired up was fallocate.  mn10300 has recvmmsg as the last system
call wired up.  The rest seem to at least have syncfs wired up which was
new in the 2.6.39.

v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall  conflicts.
v7: ported to Linus's latest post 2.6.39 tree.

>  arch/blackfin/include/asm/unistd.h     |    3 ++-
>  arch/blackfin/mach-common/entry.S      |    1 +
Acked-by: Mike Frysinger <vapier@gentoo.org>

Oh - ia64 wiring looks good.
Acked-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-28 10:48:39 -07:00
Linus Torvalds 29a6ccca38 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (97 commits)
  mtd: kill CONFIG_MTD_PARTITIONS
  mtd: remove add_mtd_partitions, add_mtd_device and friends
  mtd: convert remaining users to mtd_device_register()
  mtd: samsung onenand: convert to mtd_device_register()
  mtd: omap2 onenand: convert to mtd_device_register()
  mtd: txx9ndfmc: convert to mtd_device_register()
  mtd: tmio_nand: convert to mtd_device_register()
  mtd: socrates_nand: convert to mtd_device_register()
  mtd: sharpsl: convert to mtd_device_register()
  mtd: s3c2410 nand: convert to mtd_device_register()
  mtd: ppchameleonevb: convert to mtd_device_register()
  mtd: orion_nand: convert to mtd_device_register()
  mtd: omap2: convert to mtd_device_register()
  mtd: nomadik_nand: convert to mtd_device_register()
  mtd: ndfc: convert to mtd_device_register()
  mtd: mxc_nand: convert to mtd_device_register()
  mtd: mpc5121_nfc: convert to mtd_device_register()
  mtd: jz4740_nand: convert to mtd_device_register()
  mtd: h1910: convert to mtd_device_register()
  mtd: fsmc_nand: convert to mtd_device_register()
  ...

Fixed up trivial conflicts in
 - drivers/mtd/maps/integrator-flash.c: removed in ARM tree
 - drivers/mtd/maps/physmap.c: addition of afs partition probe type
   clashing with removal of CONFIG_MTD_PARTITIONS
2011-05-27 20:06:53 -07:00
Ingo Molnar d6a72fe465 Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent 2011-05-27 14:28:09 +02:00
Akinobu Mita 63e424c844 arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT,BIT_LE,LAST_BIT}
By the previous style change, CONFIG_GENERIC_FIND_NEXT_BIT,
CONFIG_GENERIC_FIND_BIT_LE, and CONFIG_GENERIC_FIND_LAST_BIT are not used
to test for existence of find bitops anymore.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:38 -07:00
Mike Frysinger 63ab25ebbc kgdbts: unify/generalize gdb breakpoint adjustment
The Blackfin arch, like the x86 arch, needs to adjust the PC manually
after a breakpoint is hit as normally this is handled by the remote gdb.
However, rather than starting another arch ifdef mess, create a common
GDB_ADJUSTS_BREAK_OFFSET define for any arch to opt-in via their kgdb.h.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Dongdong Deng <dongdong.deng@windriver.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:36 -07:00
Mike Frysinger 82258c661a Blackfin: convert to asm-generic ptrace.h
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:36 -07:00
Steven Rostedt f29c50419c maccess,probe_kernel: Make write/read src const void *
The functions probe_kernel_write() and probe_kernel_read() do not modify
the src pointer. Allow const pointers to be passed in without the need
of a typecast.

Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1305824936.1465.4.camel@gandalf.stny.rr.com
2011-05-25 19:56:23 -04:00
Linus Torvalds ed0795aa12 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (37 commits)
  Blackfin: use new common PERCPU_INPUT define
  MAINTAINERS: Fix Analog Devices mailinglist address
  Blackfin: boards: update ASoC resources after machine driver overhaul
  Blackfin: work around anomaly 05000480
  Blackfin: fix addr type with bfin_write_{or,and} helpers
  Blackfin: convert /proc/sram to seq_file
  Blackfin: switch /proc/gpio to seq_file
  Blackfin: fix indentation with bfin_read() helper
  Blackfin: convert old cpumask API to new one
  Blackfin: don't touch task->cpus_allowed directly
  Blackfin: don't touch cpu_possible_map and cpu_present_map directly
  Blackfin: bf548-ezkit/bf561-ezkit: update nor flash layout
  Blackfin: initial perf_event support
  Blackfin: update anomaly lists to latest public info
  Blackfin: use on-chip reset func with newer parts
  Blackfin: bf533-stamp/bf537-stamp: drop ad1980 from defconfigs
  Blackfin: optimize MMR reads during startup a bit
  Blackfin: bf537: demux port H mask A and emac rx ints
  Blackfin: bf537: fix excessive gpio int demuxing
  Blackfin: bf54x: drop unused pm gpio handling
  ...
2011-05-25 15:34:14 -07:00
Stephen Boyd 5ca43f6c3b lib: consolidate DEBUG_STACK_USAGE option
Most arches define CONFIG_DEBUG_STACK_USAGE exactly the same way.  Move it
to lib/Kconfig.debug so each arch doesn't have to define it.  This
obviously makes the option generic, but that's fine because the config is
already used in generic code.

It's not obvious to me that sysrq-P actually does anything caution by
keeping the most inclusive wording.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:54 -07:00
Mike Frysinger d6cb2e3a8d Blackfin: use new common PERCPU_INPUT define
The Blackfin percpu input sections are outdated, so rather than update
them, drop them completely and use the new common define.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:15 -04:00
Scott Jiang 6f53dbbb7f Blackfin: boards: update ASoC resources after machine driver overhaul
Now that the Blackfin machine drivers have been updated to the
multicomponent support, update the resources to match.  The pin
settings are now a board issue and removed from the driver.

Signed-off-by: Scott Jiang <scott.jiang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:14 -04:00
Steven Miao f9691bb967 Blackfin: work around anomaly 05000480
Anomaly 05000480 on BF537 rev 0.0, 0.1, 0.2:
Multiple Simultaneous Urgent DMA Requests May Cause DMA System Instability

Suggested Workaround:
Program the DMA Traffic Control Period to a non-zero value.  This forces
the DMA block to group accesses together rather than allow arbitration for
each piece of data placed on the internal DMA bus.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:14 -04:00
Mike Frysinger 7a7a430f74 Blackfin: fix addr type with bfin_write_{or,and} helpers
Since the bfin_write() func needs proper type information in order to
expand into the right bfin_writeX() variant, preserve the addr's type
when setting up the local __addr.  Otherwise the helpers will detect
the variant based upon sizeof(void) which is almost never right.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:13 -04:00
Alexey Dobriyan 934fe05bf0 Blackfin: convert /proc/sram to seq_file
->read_proc interface is going away, switch to seq_file.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:13 -04:00
Alexey Dobriyan 6362ec272c Blackfin: switch /proc/gpio to seq_file
->read_proc interface is going away, switch to seq_file.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:12 -04:00
Mike Frysinger d763c58a88 Blackfin: fix indentation with bfin_read() helper
Use tabs instead of spaces to indent.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:11 -04:00
KOSAKI Motohiro fecedc8071 Blackfin: convert old cpumask API to new one
old cpu_xxx() APIs is planned to removed later. then, converted.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:11 -04:00
KOSAKI Motohiro e887eb61e5 Blackfin: don't touch task->cpus_allowed directly
Every callter (except kthread_bind) should use proper
set_cpus_allowed_ptr() APIs.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:10 -04:00
KOSAKI Motohiro 3cb8a39fa6 Blackfin: don't touch cpu_possible_map and cpu_present_map directly
We plan to remove cpu_possible_map and cpu_present_map later and we
have proper init_cpu_possible() and init_cpu_present() APIs.

Therefore this patch rewrites platform_init_cpus and platform_prepare_cpus
by their APIs.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:10 -04:00
Mike Frysinger 5607204755 Blackfin: bf548-ezkit/bf561-ezkit: update nor flash layout
Both the BF548-EZKIT and the BF561-EZKIT use top boot flashes, so now
that Das U-Boot uses the last small sector for its environment, update
their nor layout in the kernel accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:09 -04:00
Mike Frysinger 7db7917290 Blackfin: initial perf_event support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:09 -04:00
Mike Frysinger 93f1742c63 Blackfin: update anomaly lists to latest public info
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:08 -04:00
Mike Frysinger 803103925b Blackfin: use on-chip reset func with newer parts
Turns out the documentation is wrong and doing "RAISE 1" does not result
in a software reset, only a core reset.  So when the on-chip rom has a
functioning reset helper, use it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger f91c69168a Blackfin: bf533-stamp/bf537-stamp: drop ad1980 from defconfigs
These boards don't have AD1980 modules, and that device is deprecated,
so don't bother building it up by default anymore.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger 00b5c50e47 Blackfin: optimize MMR reads during startup a bit
Since the value of these MMRs aren't changing, store the value in a local
variable and work off of that.  This avoids multiple MMR reads which are
implicitly forced by the volatile markings.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger 8c05410350 Blackfin: bf537: demux port H mask A and emac rx ints
The BF537 SIC combines the gpio port H mask A interrupts with the
emac rx interrupt, so we need to demux this in software.

It also combines the gpio port H mask B and the emac tx interrupts,
and the watchdog and port F mask B interrupts, but since we don't
support mask B yet, just add the defines for now.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger e2a8092c3f Blackfin: bf537: fix excessive gpio int demuxing
The search logic in the gpio demux walks all possible gpio blocks starting
at the specified pin.  The trouble on bf537 parts when we demux the port
F and port G mask A interrupts is that we also demux port H mask A ints.
Most of the time this isn't an issue as people don't usually use port H,
but might as well avoid it when possible.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger dd8cb37b4e Blackfin: bf54x: drop unused pm gpio handling
This functionality was merged into the common bfin_pm_standby_ctrl func
some time ago, so punt these now unused funcs and data, and localize the
wake funcs that aren't needed externally anymore.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger f58c3276d3 Blackfin: move bf537-specific irq code out of common code
The SIC interrupt line muxing that the bf537 does is specific to this
CPU (thankfully), so rip it out of the common code and move it to a
bf537-specific file.  This tidies up the common code significantly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger 6327a574f9 Blackfin: move internal irq prototypes out of global namespace
These are only used in a few internal Blackfin places, so move the irq
prototypes out of the global header and into the internal irq one.  No
functional changes other than shuffling locales.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger fc6bd7b8ad Blackfin: clean up irq ifdef logic a bit
Prefer MMR named checks over part-specific lists, condense duplicated
code across different #ifdef branches, simplify CONFIG_PM ifdefs, and
drop unused kgdb header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger 3086fd2768 Blackfin: bf51x/bf52x: fix typo in hysteresis MMR names
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger c977819d01 Blackfin: delete duplicated user single step prototypes
These are in linux/ptrace.h, so no need for us to duplicate them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Sonic Zhang c505217ca0 Blackfin: kgdb: cache flushing is not safe in SMP mode
Make sure we mark cache flushing as unsafe to kgdb in SMP mode so that
kgdb doesn't flush things incorrectly on us.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 2951acba85 Blackfin: SMP: drop unused blackfin_cpudata.idle pointer
Not sure when we stopped using this field, but nothing in the tree uses
this now, so punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 44491fbc5a Blackfin: SMP: fix cpudata cache setup
After some cache setup reordering changesets, the blackfin_cpudata init
was left behind.  While cpu0's data was correct, cpu1's data was not.
Not that big of a deal as these are only used in the cpuinfo output, but
should still be fixed.  So move the setup of these fields to the common
cache setup function to avoid this happening again in the future.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 8d011f70b0 Blackfin: clean up /proc/cpuinfo output
The smp flush lines are too long and have too many newlines, so scale
them back to match the other lines.

The %p modifier shows "(null)" for 0, so use %08x instead.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 3f62bcb259 Blackfin: bf527-ezkit: tweak sound defconfig
Build the sound pieces that the board actually has into the kernel, and
punt older devices that we discourage.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 115103a9fe Blackfin: bf533/bf537/bf561: convert to BFIN_IRQ helper
This brings the parts in line with newer ones, and makes things easier
to read at a glance.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 3dd666067d Blackfin: clean up style in irq defines
These files had a lot of whitespace damage, mostly due to copying and
pasting original files that had damage.

The BF561 header also had a lot of unused CONFIG_DEF_xxx defines, so
punt them all.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 6adc521e71 Blackfin: unify core IRQ definitions
Start a new common IRQ header and move all of the CEC pieces there.  This
lets the individual part headers worry just about its SIC defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 6b108049d6 Blackfin: ints-priority: unify duplicate vec to irq lookup logic
Seems the ipipe code just copied & pasted the existing irq lookup logic,
so pull the logic out of do_irq() and into a local helper, and convert
the two users over to that.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:41 -04:00
Mike Frysinger e9e334c35e Blackfin: ints-priority: clean up some local vars
The local ivg structs need not be exported, so mark them as static.
Further, the "num_spurious" variable is only incremented and never
actually read anywhere, so punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:41 -04:00
Sonic Zhang bc6b92f8c3 Blackfin: don't attempt to flush on-chip L1 SRAM regions
Since the on-chip L1 regions are not cacheable, there is no point in
trying to flush/invalidate them.  Plus, older Blackfin parts like to
trigger an exception (like BF533-0.3).

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:41 -04:00
Mike Frysinger 73ecfcf908 Blackfin: first pass at debug mmr support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:41 -04:00
Jamie Iles fee88c58c7 mtd: bfin: convert to mtd_device_register()
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS
preprocessor conditionals as partitioning is always available.

Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 02:20:59 +01:00
Linus Torvalds 5129df03d0 Merge branch 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: Unify input section names
  percpu: Avoid extra NOP in percpu_cmpxchg16b_double
  percpu: Cast away printk format warning
  percpu: Always align percpu output section to PAGE_SIZE

Fix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun
2011-05-24 11:53:42 -07:00
Linus Torvalds 0f1bdc1815 Merge branch 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: convert mips to generic i8253 clocksource
  clocksource: convert x86 to generic i8253 clocksource
  clocksource: convert footbridge to generic i8253 clocksource
  clocksource: add common i8253 PIT clocksource
  blackfin: convert to clocksource_register_hz
  mips: convert to clocksource_register_hz/khz
  sparc: convert to clocksource_register_hz/khz
  alpha: convert to clocksource_register_hz
  microblaze: convert to clocksource_register_hz/khz
  ia64: convert to clocksource_register_hz/khz
  x86: Convert remaining x86 clocksources to clocksource_register_hz/khz
  Make clocksource name const
2011-05-19 17:44:13 -07:00
Linus Torvalds 80fe02b5da Merge branches 'sched-core-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
  sched: Fix and optimise calculation of the weight-inverse
  sched: Avoid going ahead if ->cpus_allowed is not changed
  sched, rt: Update rq clock when unthrottling of an otherwise idle CPU
  sched: Remove unused parameters from sched_fork() and wake_up_new_task()
  sched: Shorten the construction of the span cpu mask of sched domain
  sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG
  sched: Remove unused 'this_best_prio arg' from balance_tasks()
  sched: Remove noop in alloc_rt_sched_group()
  sched: Get rid of lock_depth
  sched: Remove obsolete comment from scheduler_tick()
  sched: Fix sched_domain iterations vs. RCU
  sched: Next buddy hint on sleep and preempt path
  sched: Make set_*_buddy() work on non-task entities
  sched: Remove need_migrate_task()
  sched: Move the second half of ttwu() to the remote cpu
  sched: Restructure ttwu() some more
  sched: Rename ttwu_post_activation() to ttwu_do_wakeup()
  sched: Remove rq argument from ttwu_stat()
  sched: Remove rq->lock from the first half of ttwu()
  sched: Drop rq->lock from sched_exec()
  ...

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix rt_rq runtime leakage bug
2011-05-19 17:41:22 -07:00
Linus Torvalds 51509a283a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (34 commits)
  PM: Introduce generic prepare and complete callbacks for subsystems
  PM: Allow drivers to allocate memory from .prepare() callbacks safely
  PM: Remove CONFIG_PM_VERBOSE
  Revert "PM / Hibernate: Reduce autotuned default image size"
  PM / Hibernate: Add sysfs knob to control size of memory for drivers
  PM / Wakeup: Remove useless synchronize_rcu() call
  kmod: always provide usermodehelper_disable()
  PM / ACPI: Remove acpi_sleep=s4_nonvs
  PM / Wakeup: Fix build warning related to the "wakeup" sysfs file
  PM: Print a warning if firmware is requested when tasks are frozen
  PM / Runtime: Rework runtime PM handling during driver removal
  Freezer: Use SMP barriers
  PM / Suspend: Do not ignore error codes returned by suspend_enter()
  PM: Fix build issue in clock_ops.c for CONFIG_PM_RUNTIME unset
  PM: Revert "driver core: platform_bus: allow runtime override of dev_pm_ops"
  OMAP1 / PM: Use generic clock manipulation routines for runtime PM
  PM: Remove sysdev suspend, resume and shutdown operations
  PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM
  PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM
  PM / AVR32: Use struct syscore_ops instead of sysdevs for PM
  ...
2011-05-19 16:46:07 -07:00
Thomas Gleixner a18f22a968 Merge branch 'consolidate-clksrc-i8253' of master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource
Conflicts:
	arch/ia64/kernel/cyclone.c
	arch/mips/kernel/i8253.c
	arch/x86/kernel/i8253.c

Reason: Resolve conflicts so further cleanups do not conflict further

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-14 12:06:36 +02:00
Dominik Brodowski 2d06d8c49a [CPUFREQ] use dynamic debug instead of custom infrastructure
With dynamic debug having gained the capability to report debug messages
also during the boot process, it offers a far superior interface for
debug messages than the custom cpufreq infrastructure. As a first step,
remove the old cpufreq_debug_printk() function and replace it with a call
to the generic pr_debug() function.

How can dynamic debug be used on cpufreq? You need a kernel which has
CONFIG_DYNAMIC_DEBUG enabled.

To enabled debugging during runtime, mount debugfs and

$ echo -n 'module cpufreq +p' > /sys/kernel/debug/dynamic_debug/control

for debugging the complete "cpufreq" module. To achieve the same goal during
boot, append

	ddebug_query="module cpufreq +p"

as a boot parameter to the kernel of your choice.

For more detailled instructions, please see
Documentation/dynamic-debug-howto.txt

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
2011-05-04 11:50:57 -04:00
Rafael J. Wysocki 67f9cbf9af PM / Blackfin: Use struct syscore_ops instead of sysdevs for PM
Convert some Blackfin architecture's code to using struct syscore_ops
objects for power management instead of sysdev classes and sysdevs.

This simplifies the code and reduces the kernel's memory footprint.
It also is necessary for removing sysdevs from the kernel entirely in
the future.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-04-24 19:16:10 +02:00
Ingo Molnar 42ac9e87fd Merge commit 'v2.6.39-rc4' into sched/core
Merge reason: Pick up upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-21 11:39:28 +02:00
Peter Zijlstra 184748cc50 sched: Provide scheduler_ipi() callback in response to smp_send_reschedule()
For future rework of try_to_wake_up() we'd like to push part of that
function onto the CPU the task is actually going to run on.

In order to do so we need a generic callback from the existing scheduler IPI.

This patch introduces such a generic callback: scheduler_ipi() and
implements it as a NOP.

BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions!

Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl
2011-04-14 08:52:32 +02:00
Sonic Zhang 8d50de9ee7 Blackfin: SMP: fix cache flush loop
The recent commit (10774912647781) wasn't entirely correct.  While
it fixed some issues, it introduced others.  So pull in the fixes
from the public cache flush functions, and document why we need to
call things directly ourselves.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13 19:34:06 -04:00
Mike Frysinger 0bf02ce605 Blackfin: time-ts: ack gptimer sooner to avoid missing short ints
If the period of a gptimer is fairly low, we might miss an interrupt
by acking it too late (we end up acking the new int as well).

Reported-by: Isabelle Leonardi <i.leonardi@detracom.fr>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13 19:34:05 -04:00
Mike Frysinger ce24ee468a Blackfin: gptimers: fix thinko when disabling timers
We only want to clear the run bit for this one timer, not all status bits.
So don't read the whole reg and then write all the bits back out.

Reported-by: Isabelle Leonardi <i.leonardi@detracom.fr>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13 19:34:05 -04:00
Graf Yang 943aee0c68 Blackfin: SMP: make all barriers handle cache issues
When suspending/resuming, the common task freezing code will run in
parallel and freeze processes on each core.  This is because the code
uses the non-smp version of memory barriers (as well it should).

The Blackfin smp barrier logic at the moment contains the cache sync
logic, but the non-smp barriers do not.  This is incorrect as Rafel
summarized:
> ...
> The existing memory barriers are SMP barriers too, but they are more
> than _just_ SMP barriers.  At least that's how it is _supposed_ to be
> (eg. rmb() is supposed to be stronger than smp_rmb()).
> ...
> However, looking at the blackfin's definitions of SMP barriers I see
> that it uses extra stuff that should _also_ be used in the definitions
> of the mandatory barriers.
> ...

URL: http://lkml.org/lkml/2011/4/13/11
LKML-Reference: <BANLkTi=F-C-vwX4PGGfbkdTBw3OWL-twfg@mail.gmail.com>
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13 19:34:04 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds 6aba74f279 Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  avr32: Fix missing irq namespace conversion
  powerpc: qe_ic: Rename get_irq_desc_data and get_irq_desc_chip
  genirq: Remove the now obsolete config options and select statements
  arm: versatile : Fix typo introduced in irq namespace cleanup
  sound: Fixup the last user of the old irq functions
  genirq: Remove obsolete comment
  genirq: Remove now obsolete set_irq_wake()
  sh: Fix irq cleanup fallout
  x86: apb_timer: Fixup genirq fallout
  genirq: Fix misnamed label in handle_edge_eoi_irq

Fix up crazy conflict in arch/powerpc/include/asm/qe_ic.h:

 - commit eead4d5c63 ("powerpc: qe_ic: Rename get_irq_desc_data and
   get_irq_desc_chip") made the helper functions use
   irq_desc_get_handler_data() instead of the legacy (and no longer
   existing) get_irq_desc_data.

 - commit d4db35e8dc ("powerpc/qe_ic: Fix another breakage from the
   irq_data conversion") used irq_desc_get_chip_data() instead.

According to Thomas, the former is the correct direct conversion, but it
does look like both should work (arch/powerpc/sysdev/qe_lib/qe_ic.c
seems to initialize both to the same thing), and the chip data in some
ways is the more logical.  Somebody should really decide on one of the
other.

This merge picks irq_desc_get_handler_data() as the straightforward pure
conversion to new names, as per Thomas.
2011-03-30 09:35:52 -07:00
Linus Torvalds a8a4492138 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: bitops: fix include order after little endian inclusion
  Blackfin: defconfigs: update after misc devices defaulted to N
  Blackfin: use more standard pr_fmt in the module loader
2011-03-30 07:51:29 -07:00
Thomas Gleixner 78c8982564 genirq: Remove the now obsolete config options and select statements
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-30 14:13:23 +02:00
Thomas Gleixner 28a283aae3 bfin: Use proper accessors in trace
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:47:59 +02:00
Thomas Gleixner 43f2f1154a bfin: Convert irq namespace
Convert to the new function names. Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: uclinux-dist-devel@blackfin.uclinux.org
2011-03-29 14:47:59 +02:00
Thomas Gleixner 1907d8be2d bfin: Final irq cleanup
Use the trigger type in irq_data and check level type instead of
looking at desc->handle_irq.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: uclinux-dist-devel@blackfin.uclinux.org
2011-03-29 14:47:59 +02:00
Mike Frysinger 92a19d66a3 Blackfin: bitops: fix include order after little endian inclusion
The le.h header requires things like test_bit to be declared, so we need
to move its inclusion to after the point where that happens.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-25 16:54:13 -04:00
Mike Frysinger 901c23fb18 Blackfin: defconfigs: update after misc devices defaulted to N
The default value for misc devices was changed from Y to N which
causes problems for mini defconfigs that were relying on this
defaulting to Y.  So update all of the defconfigs accordingly.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-25 16:54:12 -04:00
Joe Perches b75a9e6bfb Blackfin: use more standard pr_fmt in the module loader
Changed pr_fmt(fmt) to make the format arguments match the format.
Changed an argument name in apply_relocate from me to mod so that
the pr_err is consistent with the other uses.
Added missing '\n' to a format.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-25 16:54:12 -04:00
Tejun Heo 0415b00d17 percpu: Always align percpu output section to PAGE_SIZE
Percpu allocator honors alignment request upto PAGE_SIZE and both the
percpu addresses in the percpu address space and the translated kernel
addresses should be aligned accordingly.  The calculation of the
former depends on the alignment of percpu output section in the kernel
image.

The linker script macros PERCPU_VADDR() and PERCPU() are used to
define this output section and the latter takes @align parameter.
Several architectures are using @align smaller than PAGE_SIZE breaking
percpu memory alignment.

This patch removes @align parameter from PERCPU(), renames it to
PERCPU_SECTION() and makes it always align to PAGE_SIZE.  While at it,
add PCPU_SETUP_BUG_ON() checks such that alignment problems are
reliably detected and remove percpu alignment comment recently added
in workqueue.c as the condition would trigger BUG way before reaching
there.

For um, this patch raises the alignment of percpu area.  As the area
is in .init, there shouldn't be any noticeable difference.

This problem was discovered by David Howells while debugging boot
failure on mn10300.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: uclinux-dist-devel@blackfin.uclinux.org
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: user-mode-linux-devel@lists.sourceforge.net
2011-03-24 18:50:09 +01:00
Linus Torvalds 05061bf678 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: bf54x: re-enable anomaly 05000353 for all revs
  Blackfin: enable atomic64_t support
  Blackfin: wire up new syncfs syscall
  Blackfin: SMP: flush CoreB cache when shutting down
2011-03-24 08:24:28 -07:00
Akinobu Mita 61f2e7b0f4 bitops: remove minix bitops from asm/bitops.h
minix bit operations are only used by minix filesystem and useless by
other modules.  Because byte order of inode and block bitmaps is different
on each architecture like below:

m68k:
	big-endian 16bit indexed bitmaps

h8300, microblaze, s390, sparc, m68knommu:
	big-endian 32 or 64bit indexed bitmaps

m32r, mips, sh, xtensa:
	big-endian 32 or 64bit indexed bitmaps for big-endian mode
	little-endian bitmaps for little-endian mode

Others:
	little-endian bitmaps

In order to move minix bit operations from asm/bitops.h to architecture
independent code in minix filesystem, this provides two config options.

CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k.
CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use
native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu,
m32r, mips, sh, xtensa).  The architectures which always use little-endian
bitmaps do not select these options.

Finally, we can remove minix bit operations from asm/bitops.h for all
architectures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:22 -07:00
Akinobu Mita f312eff816 bitops: remove ext2 non-atomic bitops from asm/bitops.h
As the result of conversions, there are no users of ext2 non-atomic bit
operations except for ext2 filesystem itself.  Now we can put them into
architecture independent code in ext2 filesystem, and remove from
asm/bitops.h for all architectures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:21 -07:00
Akinobu Mita 861b5ae7cd bitops: introduce little-endian bitops for most architectures
Introduce little-endian bit operations to the big-endian architectures
which do not have native little-endian bit operations and the
little-endian architectures.  (alpha, avr32, blackfin, cris, frv, h8300,
ia64, m32r, mips, mn10300, parisc, sh, sparc, tile, x86, xtensa)

These architectures can just include generic implementation
(asm-generic/bitops/le.h).

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:15 -07:00
Mike Frysinger de55aa33ca Blackfin: bf54x: re-enable anomaly 05000353 for all revs
Even though the anomaly sheet says that the the bootrom is fixed, tests
have shown that the fix itself does not handle all cases.  So until we
get a ROM update, assume the reset code is still broken and we need to
handle things ourselves.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-22 21:06:16 -04:00
Mike Frysinger bee18bebda Blackfin: enable atomic64_t support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-22 21:03:17 -04:00
Mike Frysinger 4e3d96deff Blackfin: wire up new syncfs syscall
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-22 21:03:16 -04:00
Graf Yang 1e924e2f1e Blackfin: SMP: flush CoreB cache when shutting down
When CoreB wakes up, it needs to read variables that CoreA might have
modified, and might be in CoreB's cache.  So kill CoreB's cache before
going to sleep so that when we wake up, we are in a coherent state.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-22 21:03:16 -04:00
Mike Frysinger 0c082bd158 Blackfin: ip0x: fix unused variable warning
The previous commit that changed this code to the common GPIO layers
forgot to delete the local and now unused "i" variable.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 05:17:02 -04:00
Mike Frysinger 58ee0d3bb1 Blackfin: punt unused HDMA masks
No code uses these, and the short define names are polluting the global
namespace where they collide with things like common irq files.  So just
punt the damned things.  If in the future we need HDMA support, we can
make a standalone header for these things.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:29:17 -04:00
Mike Frysinger a8d0142fb7 Blackfin: wire up new syscalls
Hook up name_to_handle_at, open_by_handle_at, and clock_adjtime.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:05:25 -04:00
Philippe Gerum 1353d050fa Blackfin/ipipe: restore pipeline bits in irqflags
This patch fixes the Blackfin irqflags to make them I-pipe aware anew,
after the introduction of the hard_local_irq_*() API.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:11 -04:00
Philippe Gerum 9169b51f8c Blackfin/ipipe: fix deferred pipeline sync for the root stage
This patch makes sure to sync the pipeline for the root stage only
from the outer interrupt level, when resuming kernel code after an
interrupt.

This fixes a bug causing EVT15 to be spuriously popped off upon nested
interrupts, which in turn would cause the preempted kernel code to
resume without supervisor privileges.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:11 -04:00
Philippe Gerum 5b5da4c4b8 Blackfin/ipipe: upgrade to I-pipe mainline
This patch introduces Blackfin-specific bits to support the current
tip of the interrupt pipeline development, mainly:

- 2/3-level interrupt maps (sparse IRQs)
- generic virq handling
- sysinfo v2 format for ipipe_get_sysinfo()

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:10 -04:00
Michael Hennerich 8944b5a258 Blackfin: cpufreq: fix typos
No functional changes here.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:10 -04:00
Thomas Gleixner 1eb5efa0e4 Blackfin: enable GENERIC_HARDIRQS_NO_DEPRECATED
All chips converted.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:09 -04:00
Mike Frysinger 91796c235d Blackfin: SMP: convert to irq chip functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:09 -04:00
Thomas Gleixner 9f51a874ce Blackfin: use accessor functions in show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:08 -04:00
Thomas Gleixner bc2f6bd802 Blackfin: use proper wrapper functions for modifying irq status
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:08 -04:00
Thomas Gleixner e9502850b9 Blackfin: convert gpio irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:07 -04:00
Thomas Gleixner 172d2d1d84 Blackfin: convert mac irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:07 -04:00
Thomas Gleixner dabf64bcc5 Blackfin: convert error irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:06 -04:00
Thomas Gleixner ff43a67f67 Blackfin: convert internal irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:06 -04:00
Thomas Gleixner 4f19ea4978 Blackfin: convert core irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:05 -04:00
Thomas Gleixner b10bbbbce7 Blackfin: use proper wrappers for irq_desc
Fixup the open coded access to irq_desc and use the proper wrappers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:05 -04:00
Mike Frysinger 511cdcc500 Blackfin: optimize startup code
Take advantage of more Blackfin-specific insns, and only initialize
registers required by the ABI.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:04 -04:00
Sonic Zhang c6345ab1a3 Blackfin: SMP: work around anomaly 05000491
In order to safely work around anomaly 05000491, we have to execute IFLUSH
from L1 instruction sram.  The trouble with multi-core systems is that all
L1 sram is visible only to the active core.  So we can't just place the
functions into L1 and call it directly.  We need to setup a jump table and
place the entry point in external memory.  This will call the right func
based on the active core.

In the process, convert from the manual relocation of a small bit of code
into Core B's L1 to the more general framework we already have in place
for loading arbitrary pieces of code into L1.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:04 -04:00
Graf Yang 6f546bc3ac Blackfin: SMP: implement cpu_freq support
Re-use some of the existing cpu hotplugging code in the process.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:03 -04:00
Mike Frysinger 820b127dae Blackfin: split optimization settings more
We need to place icache flush funcs into L1 inst sram to work around a
hardware anomaly.  But this currently breaks SMP support as the L1 inst
sram is per-core and cannot be called directly.  So in preparation for
making that work, split the two options.

Further, split out the SMP depend so that we can allow some for SMP.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:03 -04:00
Sonic Zhang 567ebfc99d Blackfin: SMP: disable preempt with smp_processor_id to send messages
The smp_processor_id() API requires that preempt be disabled when calling
it, so make sure it is when we go to send messages to other processors.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:02 -04:00
steven miao ab61d2ac5c Blackfin: SMP: delay enabling caches until CPU is initialized
Defer bfin_setup_caches(cpu) to avoid unexpected faults due to the cpu
state not yet being fully initialized.

Signed-off-by: steven miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:02 -04:00
Mike Frysinger 5f362c91d0 Blackfin: SMP: use standard cache functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:01 -04:00
steven miao ef9d8c251a Blackfin: SMP: PERCPU section should be PAGE aligned
Common code checks the alignment of some of the variables and calls BUG()
if they aren't page aligned.

Signed-off-by: steven miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:01 -04:00
Mike Frysinger d6b435be4b Blackfin: ADI boards: enable pseudo debug insns support
We use these insns when testing, so enable them by default for all
of our development boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 03:49:26 -04:00
Sonic Zhang cdb92f6794 Blackfin: kgdb: drop dead KGDB_THR_PROC_SWAP for SMP systems
Common code no longer defines this, so stop using it.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 03:49:26 -04:00
Andreas Schallenberg adfe6a4882 Blackfin: dnp5370: drop MMC card detect support
The board doesn't actually have a pin hooked up to do card detection,
so punt the code for it.

Signed-off-by: Andreas Schallenberg <Andreas.Schallenberg@3alitydigital.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 03:49:25 -04:00
Mike Frysinger b5fc12df90 Blackfin: add bfin_write_{or,and} helpers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 03:49:24 -04:00
Aaron Wu 4c131c8c23 Blackfin: bf548-ezkit: add CAN1 support
Signed-off-by: Aaron Wu <aaronwu06@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 03:49:24 -04:00
steven miao 55835175a0 Blackfin: bf54x: add kconfig for UART2/3 DMA channel assignments
The BF54x lacks dedicated DMA channels for the UART peripherals and need
to be muxed between others.  So add a kconfig option so people can select
which channels the UARTs will use so they can pick between SPORTs and the
less commonly used EPPI/PIXC peripherals.

Signed-off-by: steven miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 03:49:23 -04:00
Sonic Zhang 6ce0466d63 Blackfin: SMP: avoid section mismatch warnings
Since coreb_trampoline_start() calls coreb_start(), they need to be in
the same section.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 03:49:22 -04:00
Linus Torvalds 79d8a8f736 Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu, x86: Add arch-specific this_cpu_cmpxchg_double() support
  percpu: Generic support for this_cpu_cmpxchg_double()
  alpha: use L1_CACHE_BYTES for cacheline size in the linker script
  percpu: align percpu readmostly subsection to cacheline

Fix up trivial conflict in arch/x86/kernel/vmlinux.lds.S due to the
percpu alignment having changed ("x86: Reduce back the alignment of the
per-CPU data section")
2011-03-16 08:22:41 -07:00
Linus Torvalds 420c1c572d Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (62 commits)
  posix-clocks: Check write permissions in posix syscalls
  hrtimer: Remove empty hrtimer_init_hres_timer()
  hrtimer: Update hrtimer->state documentation
  hrtimer: Update base[CLOCK_BOOTTIME].offset correctly
  timers: Export CLOCK_BOOTTIME via the posix timers interface
  timers: Add CLOCK_BOOTTIME hrtimer base
  time: Extend get_xtime_and_monotonic_offset() to also return sleep
  time: Introduce get_monotonic_boottime and ktime_get_boottime
  hrtimers: extend hrtimer base code to handle more then 2 clockids
  ntp: Remove redundant and incorrect parameter check
  mn10300: Switch do_timer() to xtimer_update()
  posix clocks: Introduce dynamic clocks
  posix-timers: Cleanup namespace
  posix-timers: Add support for fd based clocks
  x86: Add clock_adjtime for x86
  posix-timers: Introduce a syscall for clock tuning.
  time: Splitout compat timex accessors
  ntp: Add ADJ_SETOFFSET mode bit
  time: Introduce timekeeping_inject_offset
  posix-timer: Update comment
  ...

Fix up new system-call-related conflicts in
	arch/x86/ia32/ia32entry.S
	arch/x86/include/asm/unistd_32.h
	arch/x86/include/asm/unistd_64.h
	arch/x86/kernel/syscall_table_32.S
(name_to_handle_at()/open_by_handle_at() vs clock_adjtime()), and some
due to movement of get_jiffies_64() in:
	kernel/time.c
2011-03-15 18:53:35 -07:00
Mike Frysinger be1229b4c5 Blackfin: iflush: update anomaly 05000491 workaround
Recent feedback from design says we need three NOPs in the hardware loop.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-04 01:27:01 -05:00
Mike Frysinger bb7b11290a Blackfin: outs[lwb]: make sure count is greater than 0
Some devices will use the outs* funcs with a length of zero, so make sure
we do not write any data in that case.

Reported-by: Gilbert Inho <gneny@edevice.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-04 01:26:55 -05:00
John Stultz a1c57e0fec blackfin: convert to clocksource_register_hz
This converts the blackfin clocksource to use clocksource_register_hz.

CC: Mike Frysinger <vapier@gentoo.org>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
2011-02-21 13:33:52 -08:00
Sonic Zhang 0f66e50af5 serial: bfin_5xx: split uart RX lock from uart port lock to avoid deadlock
The RX lock is used to protect the RX buffer from concurrent access in DMA
mode between the timer and RX interrupt routines.  It is independent from
the uart lock which is used to protect the TX buffer.  It is possible for
a uart TX transfer to be started up from the RX interrupt handler if low
latency is enabled.  So we need to split the locks to avoid deadlocking in
this situation.

In PIO mode, the RX lock is not necessary because the handle_simple_irq
and handle_level_irq functions ensure driver interrupt handlers are called
once on one core.

And now that the RX path has its own lock, the TX interrupt has nothing to
do with the RX path, so disabling it at the same time.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 14:44:54 -08:00
Torben Hohn 4196b892d5 blackfin: Switch from do_timer() to xtime_update()
xtime_update() takes the xtime_lock itself.

Signed-off-by: Torben Hohn <torbenh@gmx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: johnstul@us.ibm.com
Cc: hch@infradead.org
Cc: yong.zhang0@gmail.com
LKML-Reference: <20110127145931.23248.33917.stgit@localhost>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-31 14:55:44 +01:00
Tejun Heo 19df0c2fef percpu: align percpu readmostly subsection to cacheline
Currently percpu readmostly subsection may share cachelines with other
percpu subsections which may result in unnecessary cacheline bounce
and performance degradation.

This patch adds @cacheline parameter to PERCPU() and PERCPU_VADDR()
linker macros, makes each arch linker scripts specify its cacheline
size and use it to align percpu subsections.

This is based on Shaohua's x86 only patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Shaohua Li <shaohua.li@intel.com>
2011-01-25 14:26:50 +01:00
Thomas Gleixner 7b02886349 blackfin: Use generic irq Kconfig
No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-01-21 11:55:31 +01:00
Thomas Gleixner 1c77ff22f5 genirq: Remove __do_IRQ
All architectures are finally converted. Remove the cruft.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
2011-01-21 11:55:31 +01:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Linus Torvalds 008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Mike Frysinger a780c6e868 Blackfin: encode cpu-rev into uImage name
Encoding the cpu family name apparently confuses people when they try to
boot an image on a sub-variant, so encode the specific cpu name and the
silicon rev instead.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:27 -05:00
Mike Frysinger b66acb63f5 Blackfin: bf54x: don't ack GPIO ints when unmasking them
When unmasking a GPIO interrupt on a BF54x part, the code will implicitly
ack any pending interrupts.  This is not what unmasking should do and can
cause people to miss interrupts from their devices, so punt the code.

Reported-by: Rutger Hofman <rutger@cs.vu.nl>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:26 -05:00
Mike Frysinger 25f3ff2c44 Blackfin: sram_free_with_lsl: do not ignore return value of sram_free
If there was an error in the lower free functions, we need to pass that
back up so the calling process is able to check things.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:26 -05:00
Mike Frysinger a8b1988609 Blackfin: boards: add missing "static" to peripheral lists
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:25 -05:00
Andreas Schallenberg 3ea9f2bf5a Blackfin: DNP5370: new board port
Signed-off-by: Andreas Schallenberg <Andreas.Schallenberg@3alitydigital.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:25 -05:00
Sonic Zhang d57bc0feaa Blackfin: bf518f-ezbrd: fix dsa resources
On bf518-ezbrd with DSA Ethernet switch enabled, on chip MAC is
connecting to phy at address 3.  If allowing the netdevice framework to
probe both 3 phys of the switch when registering MAC phy, phy at address
1 is checked for link active status other than phy at address 3.  If
connecting a cable to port 2 and leave port 1 open, link status in phy
2 and 3 are online, while that in phy 1 is offline.  So, the phy layer
sets wrong offline status to net device on port 3.  In this case, no data
can be transferred via ethernet port 2.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:24 -05:00
Mike Frysinger 874f6cfd3a Blackfin: move "-m elf32bfin" to general LDFLAGS
Common code now invokes the linker directly which causes build failures
when using an FDPIC toolchain.  So move the emulation setting out of the
module-specific LDFLAGS and into the common LDFLAGS.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:24 -05:00
Vivi Li 9fc205283f Blackfin: kgdb_test: make sure to initialize num2
We check its value at runtime, so we want to avoid garbage across runs.

Signed-off-by: Vivi Li <vivi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:23 -05:00
Sonic Zhang b68233e7f0 Blackfin: kgdb: disable preempt schedule when running single step in kgdb
Otherwise, gdb continue operation after a breakpoint is hit may trap
into endless breakpoint.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:23 -05:00
Sonic Zhang 900de05182 Blackfin: kgdb: disable interrupt when single stepping in ADEOS
When ADEOS and kgdb are both enabled, single step in linux kernel may be
scheduled to Xenomai core after return from interrupt handlers.  This
blocks gdb continue operation after a break point is hit.  So, disable
interrupt when running gdb single step.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:22 -05:00
Sonic Zhang 84e97c1014 Blackfin: SMP: kgdb: apply anomaly 257 work around
When run kgdb testing, it looks like coreb hangs in single step or trap
exception without handling anomaly 05000257 properly on bf561 v0.5.  But,
the anomaly list says it apply to bf561 v0.4 and bellow.  Apply its work
around to 0.5 temporarily until the behavior and the root cause can be
confirmed by the hardware team.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:22 -05:00
Mike Frysinger 503f3d30c6 Blackfin: fix building IPIPE code when XIP is enabled
The low level assembly needs to use the pseudo_long_call helper so that
we use the right call insn when doing kernel XIP.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:21 -05:00
Sonic Zhang 064cc44e62 Blackfin: SMP: kgdb: flush core internal write buffer before flushinv
KGDB single step in SMP kernel may hang forever in flushinv without a
CSYNC ahead.  This is because the core internal write buffers need to
be flushed before invalidating the data cache to make sure the insn
fetch is not out of sync.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:21 -05:00
Sonic Zhang e54b673081 Blackfin: sport_uart resources: remove unused secondary RX/TX pins
The SPORT/UART driver doesn't use the secondary channel pins, so don't
try and request them thus keeping other drivers from using them.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:20 -05:00
Stefan Weil e01b5b1296 Blackfin: tll6527m: fix spelling in unused code (struct name)
platfrom -> platform

This changes a struct name. The related code is conditionally
compiled and won't work because the include file linux/gpio-decoder.h
is missing, so removing this code would be an even better solution.

If the missing include file is added, it must fix the spelling, too.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:20 -05:00
Sonic Zhang 624fab3bcd Blackfin: bf527-ezkit: add adau1373 chip address
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:19 -05:00
Sonic Zhang 398834330c Blackfin: no-mpu: fix masking of small uncached dma region
When using an uncached DMA region less than 1 MiB, we try to mask off
the whole last 1 MiB for it.  Unfortunately, this fails as we forgot
to subtract one from the calculated mask, leading to the region still
be marked as cacheable.

Reported-by: Andrew Rook <andrew.rook@speakerbus.co.uk>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:18 -05:00
Steven Miao 36e11ab23e Blackfin: pm: drop irq save/restore in standby and suspend to mem callback
Since linux-2.6.31, the kernel suspend framework will do disable_irq/enable_irq,
so save/restore irq in standby and suspend to mem callback should be dropped.
Otherwise the common code notices things are enabled and complains.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:18 -05:00
Mike Frysinger e15124c14c Blackfin: dpmc.h: pull in new pll.h
Any consumer of dpmc.h expects to use VR_CTL, so also pull in the new
mach/pll.h header for those functions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:17 -05:00
Mike Frysinger 77c90e3d35 Blackfin: bf54x: add MMR layout for PINT
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:17 -05:00
Mike Frysinger ec5109e7ca Blackfin: bf561: SMP: add multicore pll handlers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:16 -05:00
Mike Frysinger 10cdc1a78a Blackfin: unify pll.h headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:16 -05:00
Yi Li 73a400646b Blackfin: SMP: rewrite IPI handling to avoid memory allocation
Currently, sending an interprocessor interrupt (IPI) requires building up
a message dynamically which means memory allocation.  But often times, we
will want to send an IPI in low level contexts where allocation is not
possible which may lead to a panic().  So create a per-cpu static array
for the message queue and use that instead.

Further, while we have two supplemental interrupts, we are currently only
using one of them.  So use the second one for the most common IPI message
of all -- smp_send_reschedule().  This avoids ugly contention for locks
which in turn would require an IPI message ...

In general, this improves SMP performance, and in some cases allows the
SMP port to work in places it wouldn't before.  Such as the PREEMPT_RT
state where the slab is protected by a per-cpu spin lock.  If the slab
kmalloc/kfree were to put the task to sleep, and that task was actually
the IPI handler, then the system falls down yet again.

After running some various stress tests on the system, the static limit
of 5 messages seems to work.  On the off chance even this overflows, we
simply panic(), and we can review that scenario to see if the limit needs
to be increased a bit more.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:15 -05:00
Graf Yang 2c1657c29f Blackfin: SMP: relocate blackfin_core_id() definition
Since we're breaking apart some inter-header dependencies to avoid more
circular loops, move the blackfin_core_id() definition to the func that
it is based upon.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:15 -05:00
Mike Frysinger 05c3457ec2 Blackfin: SMP: fix build breakage in cache.h
The SMP code needs "asmlinkage" which linkage.h provides.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:14 -05:00
Graf Yang 54d756ed1a Blackfin: SMP: add missing arch_{read,write}_lock_flags helpers
Common code expects these to be defined for SMP ports, so add them.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:14 -05:00
Graf Yang 49fcc7b16f Blackfin: bf561: fix mem_map.h SMP overrides
The BF561 mem_map.h header has the __ASSEMBLY__/CONFIG_SMP checks out
of order which leads to build errors for assembly code that happens to
include this file.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:13 -05:00
Graf Yang 75734e6606 Blackfin: SMP: tweak platform_request_ipi() usage
This function takes an irq_handler_t function, but the prototype in
the header doesn't match the function definition.  This is due to the
smp headers needing to avoid circular dependencies.  So change the
function to take a simple pointer.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:13 -05:00
Mike Frysinger 71a516adb6 Blackfin: SMP: fix asm/bitops.h errors
The common asm-generic non-atomic bitops.h defines test_bit() for us, but
we need to use our own version.  So redirect the definition of this func
to avoid having to inline the rest of the asm-generic file.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:12 -05:00
Graf Yang 9c199b5965 Blackfin: SMP: fix cpumask misbehavior
The cpu maps are defines provided by common linux/cpumask.h, not local
variables.  So stop exporting them locally and include the right header
for their definition.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:12 -05:00
Graf Yang 71a66287d9 Blackfin: SMP: rename the arch_xxx lock funcs to __raw_xxx
The external functions are named __raw_xxx, not arch_xxx, so rename the
prototypes to match reality.  This fixes some simple build errors in the
bfin_ksyms.c code which exports these helpers to modules.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:11 -05:00
Sonic Zhang 57afb39935 serial: bfin_5xx: move resources into board files
Rather than maintain Kconfig entries where people have to enter raw
numbers and hardcode lists of addresses/pins in the driver itself,
push it all to platform resources.  This lets us simplify the driver,
the Kconfig, and gives board porters greater flexibility.

In the process, we need to also start supporting the early platform
interface.  Not a big deal, but it causes the patch to be bigger than
a simple resource relocation.

All the Blackfin boards already have their resources updated and in
place for this change.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:11 -05:00
Mike Frysinger 94a038c2e6 Blackfin: bf561: update a few more SIC_SYSCR locations
Looks like I missed a few new spots when renaming the SICA macros.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:10 -05:00
Mike Frysinger a2ce077ab3 Blackfin: drop asm/irq.h include from mach headers
These were only included because of the irq handling of the PLL funcs,
and those PLL funcs have been moved out into their own header now.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:10 -05:00
Mike Frysinger 53ee582654 Blackfin: bf51x/bf52x: drop redundant "base" def/cdef header
The defBF512.h header exists only to include defBF51x_base.h, and it is
the only place where defBF51x_base.h is included.  So move the contents
of the defBF51x_base.h header into the defBF512.h header.

Same situation for the other def/cdef pairs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:09 -05:00
Mike Frysinger 1a5c226528 Blackfin: clean up mach header includes
The main asm/blackfin.h header will pull in mach/blackfin.h to get
all the fun Blackfin defines.  So having any of the sub-mach headers
trying to include asm/blackfin.h makes no sense -- punt it.

The mach/blackfin.h header takes care of including the part-specific
def headers which in turn will include any other needed def file.
Similarly, it takes care of pulling in the part-specific cdef header.
So move this logic out of the blackfin.h when necessary.

Further, make sure the cdef headers do not waste time including the
def headers again.

Since all parts need the common def/cdef headers, move this logic
out of the part-specific headers and into the mach/blackfin.h file.

Finally, we need to split the BF539 def header since the BF538 does
not have MXVR and we don't want to expose those MMRs.

So now all parts should have the same behavior:
	mach/blackfin.h
		asm/def_LPBlackfin.h
		part-specific def.h
		if ! asm
			asm/cdef_LPBlackfin.h
			part-specific cdef.h
And the sub def/cdef headers only tail into what they need.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:08 -05:00
Mike Frysinger 51946b10cf Blackfin: bf533: merge fio_flag back into normal mach headers
We don't want the BF533 to be different in terms of its MMR headers, so
merge the FIO_FLAG helpers back into the normal place.  To avoid circular
dependencies with headers, turn the inline C funcs into CPP defines.  Not
like there will be any code size differences.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:08 -05:00
Mike Frysinger c31b3f7385 Blackfin: bf561-ezkit: add SMP defconfig
Since the SMP code paths tend to compile fail a lot, start a SMP defconfig
so our nightly build tools will automatically test it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:07 -05:00
Mike Frysinger 30e9b95a82 Blackfin: bf533: convert boards to gpio framework
We don't want people banging on MMRs directly.  As for the ip0x board,
it shouldn't need to muck with the CS pin directly as the Blackfin SPI
bus master driver takes care of driving this.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:07 -05:00
Mike Frysinger 4de2bf8786 Blackfin: push gpio (port) defines into common headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:06 -05:00
Mike Frysinger 9887f41533 Blackfin: bf54x: drop unused legacy MMR names
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:06 -05:00
Mike Frysinger 5e3bcf30d6 Blackfin: dma: constify MMR pointer array
The array of pointers is never written, so constify it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:05 -05:00
Mike Frysinger 9346dba556 Blackfin: standardize DMAC traffic control MMRs & MDMA MMRs
Use the same naming convention for DMA traffic MMRs (most were legacy
anyways) so we can avoid useless ifdef trees.

Same goes for MDMA names -- this actually allows us to undo a bunch of
ifdef redirects that existed for this purpose alone.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:05 -05:00
Mike Frysinger 6c8e75a06c Blackfin: bfin_dma.h: start a header for DMA MMR layout
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:04 -05:00
Mike Frysinger cfbf1677a3 Blackfin: switch to asm-generic/io.h
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:04 -05:00
Mike Frysinger efb2d31c1c asm-generic/io.h: add reads[bwl]/writes[bwl] helpers
A bunch of arches define reads[bwl]/writes[bwl] helpers for accessing
memory mapped registers.  Since the Blackfin ones aren't specific to
Blackfin code, move them to the common asm-generic/io.h for people.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:03 -05:00
Mike Frysinger b1524e29e3 Blackfin: bfin_serial.h: unify heavily duplicated serial code
Each Blackfin port has been duplicating UART structures and defines when
there really is no need for it.  So start a new bfin_serial.h header to
unify all these pieces and give ourselves a fresh start.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:02 -05:00
Bob Liu 759a3f3f31 Blackfin: musb-boards: push clkin value to platform resources
In order to not touch the driver file for different xtal usage,
push the clkin value to board file and calculate the register
value instead of hardcoding it.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:10:13 -05:00
Graf Yang 1a314ad4b0 Blackfin: SMP: fix hotplug building after irq header shuffle
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:10:13 -05:00
Jiri Kosina 4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Greg Kroah-Hartman 36facadd9e Merge branch 'usb-next' into musb-merge
* usb-next: (132 commits)
  USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path
  USB: uas: Ensure we only bind to a UAS interface
  USB: uas: Rename sense pipe and sense urb to status pipe and status urb
  USB: uas: Use kzalloc instead of kmalloc
  USB: uas: Fix up the Sense IU
  usb: musb: core: kill unneeded #include's
  DA8xx: assign name to MUSB IRQ resource
  usb: gadget: g_ncm added
  usb: gadget: f_ncm.c added
  usb: gadget: u_ether: prepare for NCM
  usb: pch_udc: Fix setup transfers with data out
  usb: pch_udc: Fix compile error, warnings and checkpatch warnings
  usb: add ab8500 usb transceiver driver
  USB: gadget: Implement runtime PM for MSM bus glue driver
  USB: gadget: Implement runtime PM for ci13xxx gadget
  USB: gadget: Add USB controller driver for MSM SoC
  USB: gadget: Introduce ci13xxx_udc_driver struct
  USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask
  USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc
  USB: gadget: Separate out PCI bus code from ci13xxx_udc
  ...
2010-12-16 10:05:06 -08:00
Felipe Balbi 9cb0308eec usb: musb: split blackfin to its own platform_driver
Just adding its own platform_driver, not really
using it yet.

Later patches will come to split power management
code from musb_core and move it completely to HW
glue layer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:16 +02:00
Felipe Balbi 05ac10dd68 usb: musb: trivial search and replace patch
change all ocurrences of musb_hdrc to musb-hdrc.

We will call glue layer drivers musb-<glue layer>,
so in order to keep things somewhat standard, let's
change the underscore into a dash.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:10 +02:00
Hema Kalliguddi fcf173e451 usb: musb: add names for IRQs in structure resource
Soon resource data will get automatically
populated from a set of autogenerated data
from TI's hardware database for the OMAP
platform.

Such database, might not have resources at
the expected order by the current drivers.

While we could hack in some exceptions to
that tool to generate resources in a specific
order, it seems less fragile to use the
resource name instead. That way, no matter
what order the resources are generated, the
driver still work.

Modified the OMAP, Blackfin and Davinci
architecture files to add the name of the IRQs
in the resource structures and musb driver to
use the platform_get_irq_byname() api to get
the device and dma irq numbers instead of using
the index.

Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 10:56:33 +02:00
Jiri Kosina 4d23033dfd Don't touch blackfin with printk typo fixes
This is a partial revert of b595076a ("tree-wide: fix comment/printk
typos"), as blackfin tree is going to have completely different
version of the code.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-19 17:06:41 +01:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Lionel Debroux 2f55ac072f suspend: constify platform_suspend_ops
While at it, fix two checkpatch errors.
Several non-const struct instances constified by this patch were added after
the introduction of platform_suspend_ops in checkpatch.pl's list of "should
be const" structs (79404849e9).

Patch against mainline.
Inspired by hunks of the grsecurity patch, updated for newer kernels.

Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-16 14:14:02 +01:00
Uwe Kleine-König b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Linus Torvalds 1e431a9d64 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,ppc: Individual register get/set for ppc
  kgdbts: prevent re-entry to kgdbts before it unregisters
  debug_core,x86,blackfin: Clean up hw debug disable API
  kdb: Fix early debugging crash regression
  kgdb,arm: fix register dump
  kdb: fix per_cpu command to remove supress mask
  kdb: Add kdb kernel module sample
2010-10-29 11:49:38 -07:00
Dongdong Deng d7ba979d45 debug_core,x86,blackfin: Clean up hw debug disable API
The kgdb_disable_hw_debug() was an architecture specific function for
disabling all hardware breakpoints on a per cpu basis when entering
the debug core.

This patch will remove the weak function kdbg_disable_hw_debug() and
change it into a call back which lives with the rest of hw breakpoint
call backs in struct kgdb_arch.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-10-29 13:14:41 -05:00
Linus Torvalds 51399a3919 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits)
  kbuild: convert `arch/tile' to the kconfig mainmenu upgrade
  README: cite nconfig
  Revert "kconfig: Temporarily disable dependency warnings"
  kconfig: Use PATH_MAX instead of 128 for path buffer sizes.
  kconfig: Fix realloc usage()
  kconfig: Propagate const
  kconfig: Don't go out from read config loop when you read new symbol
  kconfig: fix menuconfig on debian lenny
  kbuild: migrate all arch to the kconfig mainmenu upgrade
  kconfig: expand file names
  kconfig: use the file's name of sourced file
  kconfig: constify file name
  kconfig: don't emit warning upon rootmenu's prompt redefinition
  kconfig: replace KERNELVERSION usage by the mainmenu's prompt
  kconfig: delay gconf window initialization
  kconfig: expand by default the rootmenu's prompt
  kconfig: add a symbol string expansion helper
  kconfig: regen parser
  kconfig: implement the `mainmenu' directive
  kconfig: allow PACKAGE to be defined on the compiler's command-line
  ...

Fix up trivial conflict in arch/mn10300/Kconfig
2010-10-28 16:16:39 -07:00
Namhyung Kim aeebd3a3d9 ptrace: cleanup arch_ptrace() and friends on Blackfin
Change signature of get/put_reg() according to the change of arch_ptrace()
and remove unnecessary castings.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Namhyung Kim 9b05a69e05 ptrace: change signature of arch_ptrace()
Fix up the arguments to arch_ptrace() to take account of the fact that
@addr and @data are now unsigned long rather than long as of a preceding
patch in this series.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Philippe De Muyter c925cf0b80 m68k{nommu}/blackfin : remove old assembler-only flags bit definitions
Long ago, PT_TRACESYS_OFF and friends were introduced as hard defines to
avoid straight constants in assembler parts of linux m68k.  They are not
used anymore, and were not updated to follow changes in linux kernel.
Remove them.  When similar constants are needed, they are now generated
using asm-offsets.c.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:12 -07:00
Mike Frysinger ad3e01a331 Blackfin: fix inverted anomaly 05000481 logic
No one uses these MMRs so we didn't notice when the anomaly handling
logic was inverted.

Reported-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 17:24:00 -04:00
Mike Frysinger 09ebdedf48 Blackfin: drop unused irq_panic()/DEBUG_ICACHE_CHECK
This code was useful during early port development when our icache code
wasn't solid, but that ship has sailed long ago, and no code calls this
function anymore (irq_panic).  So punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 17:24:00 -04:00
Mike Frysinger ff7cbc4b5c Blackfin: ppi/spi/twi headers: add missing __BFP undef
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 04:54:33 -04:00
Mike Frysinger 10cbb0ba42 Blackfin: update defconfigs
- enable pm for ADI boards
- drop security option as no one uses it
- enable uninitialized mmap for everyone
- disable wireless by default as no one uses it
- disable cfq io sched as noop is fine

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 04:54:33 -04:00
Mike Frysinger 61c16b5c74 Blackfin: bfin_twi.h: start a common TWI header
Start one place for TWI definitions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 04:54:32 -04:00
Sonic Zhang 02460d0893 netdev: bfin_mac: push settings to platform resources
Move all the pin settings out of the Kconfig and into the platform
resources (MII vs RMII).  This clean up also lets us push out the
phy settings so that board porters may control the layout.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 04:54:25 -04:00
Linus Torvalds 229aebb873 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Update broken web addresses in arch directory.
  Update broken web addresses in the kernel.
  Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
  Revert "Fix typo: configuation => configuration" partially
  ida: document IDA_BITMAP_LONGS calculation
  ext2: fix a typo on comment in ext2/inode.c
  drivers/scsi: Remove unnecessary casts of private_data
  drivers/s390: Remove unnecessary casts of private_data
  net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
  drivers/infiniband: Remove unnecessary casts of private_data
  drivers/gpu/drm: Remove unnecessary casts of private_data
  kernel/pm_qos_params.c: Remove unnecessary casts of private_data
  fs/ecryptfs: Remove unnecessary casts of private_data
  fs/seq_file.c: Remove unnecessary casts of private_data
  arm: uengine.c: remove C99 comments
  arm: scoop.c: remove C99 comments
  Fix typo configue => configure in comments
  Fix typo: configuation => configuration
  Fix typo interrest[ing|ed] => interest[ing|ed]
  Fix various typos of valid in comments
  ...

Fix up trivial conflicts in:
	drivers/char/ipmi/ipmi_si_intf.c
	drivers/usb/gadget/rndis.c
	net/irda/irnet/irnet_ppp.c
2010-10-24 13:41:39 -07:00
Linus Torvalds 7f38839628 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (47 commits)
  Blackfin: bfin_spi.h: add MMR peripheral layout
  Blackfin: bfin_ppi.h: start a common PPI/EPPI header
  Blackfin: bfin_can.h: add missing VERSION/VERSION2 MMRs
  Blackfin: bf538: add missing SIC_RVECT define
  Blackfin: bf561: rewrite SICA_xxx to just SIC_xxx
  Blackfin: bf54x: add missing SIC_RVECT definition
  Blackfin: H8606: move 8250 irqflags to platform resources
  Blackfin: glue XIP/ROM kernel kconfigs
  Blackfin: update sparse flags for latest upstream changes
  Blackfin: coreb: update ioctl numbers
  Blackfin: coreb: add gpl module license
  Blackfin: bf518-ezkit: add ssm2603 codec resources
  Blackfin: bf51x/bf52x: fix 16/32bit SPORT MMR helpers
  Blackfin: tll6527m: new board port
  Blackfin: bf526-ezbrd/bf527-ezkit: add NAND partition for u-boot
  Blackfin: merge kernel init memory back into main memory region
  Blackfin: gpio: add peripheral group check
  Blackfin: dma: bf54x: add missing break for SPORT1 TX IRQ
  Blackfin: add new cacheflush syscall
  Blackfin: bf548-ezkit: increase u-boot partition size
  ...
2010-10-22 21:12:27 -07:00
Mike Frysinger b9ac41e314 Blackfin: bfin_spi.h: add MMR peripheral layout
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:03 -04:00
Mike Frysinger fec84d21c5 Blackfin: bfin_ppi.h: start a common PPI/EPPI header
Start unifying the PPI/EPPI peripheral structures in one place.  This
may be used by camera/video/fpga/high speed devices.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:03 -04:00
Mike Frysinger faf3d9ed2b Blackfin: bfin_can.h: add missing VERSION/VERSION2 MMRs
Also document the mailbox (channel) data array layout.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:03 -04:00
Mike Frysinger 5d868212c4 Blackfin: bf538: add missing SIC_RVECT define
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:02 -04:00
Mike Frysinger 39c999697b Blackfin: bf561: rewrite SICA_xxx to just SIC_xxx
This matches all the other Blackfin ports and keep us from having to write
bf561-specific code in many places.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:02 -04:00
Mike Frysinger 9ebcaa47ba Blackfin: bf54x: add missing SIC_RVECT definition
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:01 -04:00
Mike Frysinger 49e00edbb7 Blackfin: H8606: move 8250 irqflags to platform resources
Now that the common 8250 serial driver supports an "irqflags" field,
we don't need to patch in a custom define into the code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:01 -04:00
Mike Frysinger 56b4f07a08 Blackfin: glue XIP/ROM kernel kconfigs
Different arches use different names, so make sure we define both so
common code (like MTD_XIP) "just works".

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:00 -04:00
Mike Frysinger 245322082a Blackfin: update sparse flags for latest upstream changes
Mainline version of git merged support for Blackfin parts, but we now
need to propagate the gcc arch define to make it work.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:00 -04:00
Mike Frysinger 7696eecf14 Blackfin: coreb: update ioctl numbers
We have to use ioctl numbers that don't collide with common code.
Otherwise, these ones never even get called because the common fs
code swalled all invocations.

Reported-by: Kay Duenzer <kduenzer@maku.eu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:29:59 -04:00
Mike Frysinger 6cf4d0fadc Blackfin: coreb: add gpl module license
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:29:59 -04:00
Bob Liu 97dd505cd6 Blackfin: bf518-ezkit: add ssm2603 codec resources
This board has a SSM2603 codec, so make sure we have the right resources
declared for it.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:29:59 -04:00
Bob Liu c5b77b450a Blackfin: bf51x/bf52x: fix 16/32bit SPORT MMR helpers
The RX/TX address is always the same regardless of the size of the access.
That means there is no dedicated "16bit" or "32bit" MMR.  Trying to use
these currently leads to compile errors.  So change everything to use the
right MMR define.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:29:58 -04:00
Ashish Gupta e5c1721894 Blackfin: tll6527m: new board port
Signed-off-by: Ashish Gupta <asg@thelearninglabs.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:29:58 -04:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Mike Frysinger 5cc1c567c1 Blackfin: bf526-ezbrd/bf527-ezkit: add NAND partition for u-boot
Since these boards can boot out of NAND, make sure we give u-boot its
own partition by default to avoid clobbering it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 04:02:02 -04:00
Sonic Zhang 46284cd6bf Blackfin: merge kernel init memory back into main memory region
If the kernel's init section is merged back into the main memory region
during boot (which it should since that is how we've laid out the kernel
linker map), we want to make sure that these aren't counted as independent
regions.  Otherwise, if a large mapping is attempted which starts in the
init region and extends into the main memory region, the access_ok func
will deny it.  This leads to weird messages during runtime like "unable
to map xxx library" from the ldso but upon running the application again,
everything works fine.

So if the address of the end of the init region is the same as the start
of the main memory region, simply enlarge the memory region to include
the init region.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 04:02:01 -04:00
steven miao 05bbec38db Blackfin: gpio: add peripheral group check
Many Blackfin parts group sets of pins into a single functional unit.
This means you cannot use different pins within a group for different
peripherals.  Our resource conflict checking thus far has been limited
to individual pins, so if someone tried to grab a different pin from
the same group, it would be allowed while silently changing the other
pins in the same group.

One common example is the pin set PG12 - PG15 on BF51x parts.  They
may either be used with SPI0 (1st function), or they may be used with
PTP/PWM/AMS3 (3rd function).  Ideally, we'd like to use PG12 - PG14
for SPI0 while using PG15 with AMS3, but the hardware does not permit
this.  In the past, the software would allow the pins to be requested
this way, but ultimately things like the Blackfin SPI driver would
stop working when the hardware rerouted to a different peripheral.

Signed-off-by: steven miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 04:02:01 -04:00
Mike Frysinger a71159b96a Blackfin: dma: bf54x: add missing break for SPORT1 TX IRQ
Reported-by: D Binderman <dcb314@hotmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:49:00 -04:00
Sonic Zhang 99a5b2878b Blackfin: add new cacheflush syscall
Flushing caches sometimes requires anomaly workarounds which require
supervisor-only insns.  Normally we don't need to flush caches from
userspace so this isn't a problem, but when gcc generates trampolines
on the stack, we do.

So add a new syscall for gcc to use modeled after the mips version.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:59 -04:00
Mike Frysinger 73775b892e Blackfin: bf548-ezkit: increase u-boot partition size
The BF54x processor has a ton of on-chip peripherals and in order to
support them all, the u-boot image is quite large.  So give it 512KiB
in all bootable flashes to make our lives easier.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:58 -04:00
steven miao 39d3c1ca1f Blackfin: boards: add example i2c resources for ad525x devices
Signed-off-by: steven miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:58 -04:00
Michael Hennerich bedeea6e3b Blackfin: SIC: fix off-by-one error in loop
Make sure we include EMAC_SYSTAT when showing errors.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:57 -04:00
Sonic Zhang 948ca1a788 Blackfin: bf537-stamp: tweak i2c address for ad5280 add-on tftlcd board
The predefined i2c address 0x2c doesn't match the configuration of the
ad5280 PINs AD0 and AD1 on the tftlcd add-on board.  Both AD0 and AD1
are of voltage 3.3V, which means the i2c address should be 0x2F.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:57 -04:00
Mike Frysinger 8060bb6f59 Blackfin: bf51x: enable support for 0.2 silicon
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:56 -04:00
Barry Song 33ded95b1c Blackfin: initial preempt support while returning from interrupt
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:55 -04:00
Robin Getz c0ab938745 Blackfin: workaround anomaly 05000481 (corruption with ITEST MMRs)
Nothing actually needs to use these MMRs (as direct cache manipulation
is done with the DTEST MMRs), so simply hide the read funcs behind the
anomaly define.  They're generally unusable anyways when this anomaly
is in effect.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:55 -04:00
Mike Frysinger 3d7dc8836a Blackfin: i2c-gpio boards: use GPIO_PF# defines
Rather than use raw numbers for the GPIO pins, use proper GPIO defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:54 -04:00
Barry Song 41c3e3346a Blackfin: access_ok: permit L1 stack
When apps run with their stack in L1, some system calls might be made
where a buffer is in the stack as an argument.  So make sure the core
Blackfin access code does not reject this memory location.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:54 -04:00
Barry Song 027285e86f Blackfin: bf561-ezkit: add AD1836 codec resources
This board has an AD1836 codec, so make sure we have the right resources
declared for it.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:53 -04:00
Barry Song 175671e75c Blackfin: ptrace: enable access to L1 stacks
If an app is placing its stack in L1 scratchpad SRAM, make sure ptrace
is granted access to it so that gdb can do its thing.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:52 -04:00
Mike Frysinger c5af5451fc Blackfin: boards: fix num_chipselect values for on-chip SPI buses
The num_chipselect field for on-chip Blackfin SPI buses is supposed to
be 1 larger than the number of actual CSs available.  This is because
the hardware starts counting at 1 and not 0.  There is a field for "CS0",
but it is marked as "reserved" everywhere.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:52 -04:00
Michael Hennerich 8effc4a68b Blackfin: ad7160eval: new board port
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:51 -04:00
Sonic Zhang 27e9f0b436 Blackfin: bf537-stamp: re-use regulator framework with ad5398 parts
We don't need our own header and structure to hook up the ad5398 part,
so drop the custom resources for it.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:51 -04:00
Sonic Zhang 1b04cbeabd Blackfin: bf537-stamp: re-use the fixed regulator voltage driver
Rather than write our own ADP switch driver, use the existing fixed
regulator driver and rewrite the platform resources accordingly.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:50 -04:00
Michael Hennerich 2adcf194cb Blackfin: SIC: BF537: change default data/error relative priorities
Some peripherals might generate an error interrupt shortly after the
data interrupt due to the fact that the peripheral isn't serviced fast
enough.  In most cases this isn't a problem and is expected behavior.
This hasn't been a problem on most parts since you simply don't request
the error interrupt (or you leave it disabled while there is an expected
state) and do the peripheral status checking in the data interrupt.

The Blackfin SIC allows people to prioritize data and error interrupts,
and the Blackfin CEC allows interrupts of equal or higher priority to
nest.  The current default settings gives error interrupts a higher
priority than data interrupts.  So if an error occurs while processing
the data interrupt, it will be serviced immediately.

However, the error interrupt on the BF537 SIC cannot be enabled on a
per-peripheral basis.  Once the error interrupt is enabled for one
peripheral, it is automatically enabled for all peripherals.

Therefore lower the default multiplexed error interrupt priority so
most people need not worry themselves with this issue.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:49 -04:00