Commit Graph

49 Commits

Author SHA1 Message Date
Gary Hade c04fc586c1 mm: show node to memory section relationship with symlinks in sysfs
Show node to memory section relationship with symlinks in sysfs

Add /sys/devices/system/node/nodeX/memoryY symlinks for all
the memory sections located on nodeX.  For example:
/sys/devices/system/node/node1/memory135 -> ../../memory/memory135
indicates that memory section 135 resides on node1.

Also revises documentation to cover this change as well as updating
Documentation/ABI/testing/sysfs-devices-memory to include descriptions
of memory hotremove files 'phys_device', 'phys_index', and 'state'
that were previously not described there.

In addition to it always being a good policy to provide users with
the maximum possible amount of physical location information for
resources that can be hot-added and/or hot-removed, the following
are some (but likely not all) of the user benefits provided by
this change.
Immediate:
  - Provides information needed to determine the specific node
    on which a defective DIMM is located.  This will reduce system
    downtime when the node or defective DIMM is swapped out.
  - Prevents unintended onlining of a memory section that was
    previously offlined due to a defective DIMM.  This could happen
    during node hot-add when the user or node hot-add assist script
    onlines _all_ offlined sections due to user or script inability
    to identify the specific memory sections located on the hot-added
    node.  The consequences of reintroducing the defective memory
    could be ugly.
  - Provides information needed to vary the amount and distribution
    of memory on specific nodes for testing or debugging purposes.
Future:
  - Will provide information needed to identify the memory
    sections that need to be offlined prior to physical removal
    of a specific node.

Symlink creation during boot was tested on 2-node x86_64, 2-node
ppc64, and 2-node ia64 systems.  Symlink creation during physical
memory hot-add tested on a 2-node x86_64 system.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:00 -08:00
Badari Pulavarty 71088785c6 mm: cleanup to make remove_memory() arch-neutral
There is nothing architecture specific about remove_memory().
remove_memory() function is common for all architectures which support
hotplug memory remove.  Instead of duplicating it in every architecture,
collapse them into arch neutral function.

[akpm@linux-foundation.org: fix the export]
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:50:25 -07:00
Adrian Bunk 9d5a9e7465 Remove asm/a.out.h files for all architectures without a.out support.
This patch also includes the required removal of (unused) inclusion of
<asm/a.out.h> <linux/a.out.h>'s in the arch/ code for these
architectures.

[dwmw2: updated for 2.6.27-rc]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-06 19:30:24 +01:00
Huang, Xiaolan 839052d27e [IA64] fix personality(PER_LINUX32) performance issue
The patch aims to fix a performance issue for the syscall
personality(PER_LINUX32).

On IA-64 box, the syscall personality (PER_LINUX32) has poor performance
because it failed to find the Linux/x86 execution domain. Then it tried
to load the kernel module however it failed always and it used the default
execution domain PER_LINUX instead. Requesting kernel modules is very
expensive. It caused the performance issue. (see the function
lookup_exec_domain in kernel/exec_domain.c).

To resolve the issue, execution domain Linux/x86 is always registered in
initialization time for IA-64 architecture.

Signed-off-by: Xiaolan Huang <xiaolan.huang@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-05-15 09:54:19 -07:00
Jeremy Fitzhardinge 180c06efce hotplug-memory: make online_page() common
All architectures use an effectively identical definition of online_page(), so
just make it common code.  x86-64, ia64, powerpc and sh are actually
identical; x86-32 is slightly different.

x86-32's differences arise because it puts its hotplug pages in the highmem
zone.  We can handle this in the generic code by inspecting the page to see if
its in highmem, and update the totalhigh_pages count appropriately.  This
leaves init_32.c:free_new_highpage with a single caller, so I folded it into
add_one_highpage_init.

I also removed an incorrect comment referring to the NUMA case; any NUMA
details have already been dealt with by the time online_page() is called.

[akpm@linux-foundation.org: fix indenting]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamez.hiroyu@jp.fujitsu.com>
Tested-by: KAMEZAWA Hiroyuki <kamez.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Christoph Lameter <clameter@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:17 -07:00
Zoltan Menyhart 98075d245a [IA64] Fix NUMA configuration issue
There is a NUMA memory configuration issue in 2.6.24:

A 2-node machine of ours has got the following memory layout:

Node 0:	0 - 2 Gbytes
Node 0:	4 - 8 Gbytes
Node 1:	8 - 16 Gbytes
Node 0:	16 - 18 Gbytes

"efi_memmap_init()" merges the three last ranges into one.

"register_active_ranges()" is called as follows:

efi_memmap_walk(register_active_ranges, NULL);

i.e. once for the 4 - 18 Gbytes range. It picks up the node
number from the start address, and registers all the memory for
the node #0.

"register_active_ranges()" should be called as follows to
make sure there is no merged address range at its entry:

efi_memmap_walk(filter_memory, register_active_ranges);

"filter_memory()" is similar to "filter_rsvd_memory()",
but the reserved memory ranges are not filtered out.

Signed-off-by: Zoltan Menyhart <Zoltan.Menyhart@bull.net>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-04-11 15:21:35 -07:00
Christoph Lameter 273988fa4d [IA64] Untangle sync_icache_dcache() page size determination
Untangle the chaos of page size determination in this function by
simply using PAGE_SIZE << compound_order().

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-04-09 13:05:41 -07:00
Harvey Harrison d4ed80841a [IA64] remove remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Long lines have been kept where they exist, some small spacing changes
have been done.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-03-06 09:19:27 -08:00
Adrian Bunk 18b8befd37 [IA64] ia64/mm/init.c: fix section mismatches
This patch fixes the following section mismatches:

<--  snip  -->

...
WARNING: vmlinux.o(.text+0x5b5c2): Section mismatch: reference to .init.text:memmap_init_zone (between 'memmap_init' and 'virtual_memmap_init')
WARNING: vmlinux.o(.text+0x5b842): Section mismatch: reference to .init.text:memmap_init_zone (between 'virtual_memmap_init' and 'ia64_mmu_init')
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-29 10:42:35 -07:00
Coly Li 3ed75eb8f1 setup vma->vm_page_prot by vm_get_page_prot()
This patch uses vm_get_page_prot() to setup vma->vm_page_prot.

Though inside vm_get_page_prot() the protection flags is AND with
(VM_READ|VM_WRITE|VM_EXEC|VM_SHARED), it does not hurt correct code.

Signed-off-by: Coly Li <coyli@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:34 -07:00
KAMEZAWA Hiroyuki 48e94196a5 fix memory hot remove not configured case.
Now, arch dependent code around CONFIG_MEMORY_HOTREMOVE is a mess.
This patch cleans up them. This is against 2.6.23-rc6-mm1.

 - fix compile failure on ia64/ CONFIG_MEMORY_HOTPLUG && !CONFIG_MEMORY_HOTREMOVE case.
 - For !CONFIG_MEMORY_HOTREMOVE, add generic no-op remove_memory(),
   which returns -EINVAL.
 - removed remove_pages() only used in powerpc.
 - removed no-op remove_memory() in i386, sh, sparc64, x86_64.

 - only powerpc returns -ENOSYS at memory hot remove(no-op). changes it
   to return -EINVAL.

Note:
Currently, only ia64 supports CONFIG_MEMORY_HOTREMOVE. I welcome other
archs if there are requirements and testers.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:02 -07:00
KAMEZAWA Hiroyuki de33b821f3 memory unplug: ia64 interface
IA64 memory unplug interface.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:02 -07:00
KAMEZAWA Hiroyuki 954ffcb35f flush icache before set_pte() on ia64: flush icache at set_pte
Current ia64 kernel flushes icache by lazy_mmu_prot_update() *after*
set_pte().  This is too late.  This patch removes lazy_mmu_prot_update and
add modfied set_pte() for flushing if necessary.

This patch flush icache of a page when
	new pte has exec bit.
	&& new pte has present bit
	&& new pte is user's page.
	&& (old *ptep is not present
            || new pte's pfn is not same to old *ptep's ptn)
	&& new pte's page has no Pg_arch_1 bit.
	   Pg_arch_1 is set when a page is cache consistent.

I think this condition checks are much easier to understand than considering
"Where sync_icache_dcache() should be inserted ?".

pte_user() for ia64 was removed by http://lkml.org/lkml/2007/6/12/67 as
clean-up. So, I added it again.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:59 -07:00
Christoph Lameter 2bd62a40f6 [IA64] Quicklist support for IA64
IA64 is the origin of the quicklist implementation.  So cut out the pieces
that are now in core code and modify the functions called.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-11 09:40:00 -07:00
Linus Torvalds a989705c4c Merge git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] update memory attribute aliasing documentation & test cases
  [IA64] fail mmaps that span areas with incompatible attributes
  [IA64] allow WB /sys/.../legacy_mem mmaps
  [IA64] make ioremap avoid unsupported attributes
  [IA64] rename ioremap variables to match i386
  [IA64] relax per-cpu TLB requirement to DTC
  [IA64] remove per-cpu ia64_phys_stacked_size_p8
  [IA64] Fix example error injection program
  [IA64] Itanium MC Error Injection Tool: pal_mc_error_inject() interface
  [IA64] Itanium MC Error Injection Tool: Makefile changes
  [IA64] Itanium MC Error Injection Tool: Driver sysfs interface
  [IA64] Itanium MC Error Injection Tool: Doc and sample application
  [IA64] Itanium MC Error Injection Tool: Kernel configuration
2007-05-07 12:34:57 -07:00
Christoph Lameter d85f33855c Make page->private usable in compound pages
If we add a new flag so that we can distinguish between the first page and the
tail pages then we can avoid to use page->private in the first page.
page->private == page for the first page, so there is no real information in
there.

Freeing up page->private makes the use of compound pages more transparent.
They become more usable like real pages.  Right now we have to be careful f.e.
 if we are going beyond PAGE_SIZE allocations in the slab on i386 because we
can then no longer use the private field.  This is one of the issues that
cause us not to support debugging for page size slabs in SLAB.

Having page->private available for SLUB would allow more meta information in
the page struct.  I can probably avoid the 16 bit ints that I have in there
right now.

Also if page->private is available then a compound page may be equipped with
buffer heads.  This may free up the way for filesystems to support larger
blocks than page size.

We add PageTail as an alias of PageReclaim.  Compound pages cannot currently
be reclaimed.  Because of the alias one needs to check PageCompound first.

The RFC for the this approach was discussed at
http://marc.info/?t=117574302800001&r=1&w=2

[nacc@us.ibm.com: fix hugetlbfs]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:53 -07:00
Tony Luck b643b0fdbc Pull percpu-dtc into release branch 2007-04-30 13:56:00 -07:00
KAMEZAWA Hiroyuki 83d2cd3de4 [IA64] bugfix stack layout upside-down
ia64 expects following vm layout:

== low memory
[register-stack grows up]
[memory-stack grows down]
== high memory

But the code assigns the base of the register stack at the
maximum stack size offset from the fixed address where the
stack *might* start.  Stack randomization will result in the
memory stack starting at a lower address than this, and if the
user has set a low stack limit with "ulimit -s", then you can
end up with the register stack above the memory stack (or if
you were very unlucky right on top of it!).

Fix: Calculate the base address for the register stack starting
from the actual address of the memory stack.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-29 15:15:24 -07:00
Zou Nan hai a3f5c338b9 [IA64] min_low_pfn and max_low_pfn calculation fix
We have seen bad_pte_print when testing crashdump on an SN machine in
recent 2.6.20 kernel.  There are tons of bad pte print (pfn < max_low_pfn)
reports when the crash kernel boots up, all those reported bad pages
are inside initmem range; That is because if the crash kernel code and
data happens to be at the beginning of the 1st node. build_node_maps in
discontig.c will bypass reserved regions with filter_rsvd_memory. Since
min_low_pfn is calculated in build_node_map, so in this case, min_low_pfn
will be greater than kernel code and data.

Because pages inside initmem are freed and reused later, we saw
pfn_valid check fail on those pages.

I think this theoretically happen on a normal kernel. When I check
min_low_pfn and max_low_pfn calculation in contig.c and discontig.c.
I found more issues than this.

1. min_low_pfn and max_low_pfn calculation is inconsistent between
contig.c and discontig.c,
min_low_pfn is calculated as the first page number of boot memmap in
contig.c (Why? Though this may work at the most of the time, I don't
think it is the right logic). It is calculated as the lowest physical
memory page number bypass reserved regions in discontig.c.
max_low_pfn is calculated include reserved regions in contig.c. It is
calculated exclude reserved regions in discontig.c.

2. If kernel code and data region is happen to be at the begin or the
end of physical memory, when min_low_pfn and max_low_pfn calculation is
bypassed kernel code and data, pages in initmem will report bad.

3. initrd is also in reserved regions, if it is at the begin or at the
end of physical memory, kernel will refuse to reuse the memory. Because
the virt_addr_valid check in free_initrd_mem.

So it is better to fix and clean up those issues.
Calculate min_low_pfn and max_low_pfn in a consistent way.

Signed-off-by:	Zou Nan hai <nanhai.zou@intel.com>
Acked-by: Jay Lan <jlan@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-20 13:41:57 -07:00
Robert P. J. Day c376222960 [PATCH] Transform kmem_cache_alloc()+memset(0) -> kmem_cache_zalloc().
Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the
corresponding "kmem_cache_zalloc()" call.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Roland McGrath <roland@redhat.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: Joel Becker <Joel.Becker@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:27 -08:00
Christoph Lameter 9195481d2f [PATCH] Drop nr_free_pages_pgdat()
Function is unnecessary now.  We can use the summing features of the ZVCs to
get the values we need.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:18 -08:00
Chen, Kenneth W 00b65985fb [IA64] relax per-cpu TLB requirement to DTC
Instead of pinning per-cpu TLB into a DTR, use DTC.  This will free up
one TLB entry for application, or even kernel if access pattern to
per-cpu data area has high temporal locality.

Since per-cpu is mapped at the top of region 7 address, we just need to
add special case in alt_dtlb_miss.  The physical address of per-cpu data
is already conveniently stored in IA64_KR(PER_CPU_DATA).  Latency for
alt_dtlb_miss is not affected as we can hide all the latency.  It was
measured that alt_dtlb_miss handler has 23 cycles latency before and
after the patch.

The performance effect is massive for applications that put lots of tlb
pressure on CPU.  Workload environment like database online transaction
processing or application uses tera-byte of memory would benefit the most.
Measurement with industry standard database benchmark shown an upward
of 1.6% gain.  While smaller workloads like cpu, java also showing small
improvement.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-02-06 15:04:48 -08:00
Jan Beulich cde14bbfb3 [IA64] swiotlb bug fixes
This patch fixes
- marking I-cache clean of pages DMAed to now only done for IA64
- broken multiple inclusion in include/asm-x86_64/swiotlb.h
- missing call to mark_clean in swiotlb_sync_sg()
- a (perhaps only theoretical) issue in swiotlb_dma_supported() when
io_tlb_end is exactly at the end of memory

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-02-05 18:46:40 -08:00
Bob Picco 139b830477 [IA64] register memory ranges in a consistent manner
While pursuing and unrelated issue with 64Mb granules I noticed a problem
related to inconsistent use of add_active_range.  There doesn't appear any
reason to me why FLATMEM versus DISCONTIG_MEM should register memory to
add_active_range with different code.  So I've changed the code into a
common implementation.

The other subtle issue fixed by this patch was calling add_active_range in
count_node_pages before granule aligning is performed.  We were lucky with
16MB granules but not so with 64MB granules.  count_node_pages has reserved
regions filtered out and as a consequence linked kernel text and data
aren't covered by calls to count_node_pages.  So linked kernel regions
wasn't reported to add_active_regions.  This resulted in free_initmem
causing numerous bad_page reports.  This won't occur with this patch
because now all known memory regions are reported by
register_active_ranges.

Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-02-05 15:07:47 -08:00
Dave Hansen a2f3aa0257 [PATCH] Fix sparsemem on Cell
Fix an oops experienced on the Cell architecture when init-time functions,
early_*(), are called at runtime.  It alters the call paths to make sure
that the callers explicitly say whether the call is being made on behalf of
a hotplug even, or happening at boot-time.

It has been compile tested on ppc64, ia64, s390, i386 and x86_64.

Acked-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-11 18:18:20 -08:00
Tony Luck 8b9c106856 [IA64] fix arch/ia64/mm/contig.c:235: warning: unused variable `nid'
This warning only shows up with CONFIG_VIRTUAL_MEM_MAP=y and
CONFIG_FLATMEM=y.

There is only one caller left for register_active_ranges() from the
contig.c code ... so it doesn't need to pick up the node number, the
node number is always zero.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12 11:18:55 -08:00
Christoph Lameter e94b176609 [PATCH] slab: remove SLAB_KERNEL
SLAB_KERNEL is an alias of GFP_KERNEL.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:24 -08:00
Mel Gorman 05e0caad3b [PATCH] Have ia64 use add_active_range() and free_area_init_nodes
Size zones and holes in an architecture independent manner for ia64.

[bob.picco@hp.com: fix ia64 FLATMEM+VIRTUAL_MEM_MAP]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:11 -07:00
Bob Picco e44e41d0c8 [IA64] fix show_mem for VIRTUAL_MEM_MAP+FLATMEM
contig.c (FLATMEM) requires the same optimization as in discontig.c for show_mem
when VIRTUAL_MEM_MAP is in use. Otherwise FLATMEM has softlockup timeouts.
This was boot tested for memory configuration: SPARSEMEM,
DISCONTIG+VIRTUAL_MEM_MAP, FLATMEM, FLATMEM+VIRTUAL_MEM_MAP and
FLATMEM+VIRTUAL_MEM_MAP with largest memory gap less than LARGE_GAP by
using boot parameter "mem=".

This was boot tested and "echo m >/proc/sysrq-trigger" output evaluated for
: FLATMEM, FLATMEM+VIRTUAL_MEM_MAP, DISCONTIGMEM+VIRTUAL_MEM_MAP and
SPARSEMEM.

Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-08-03 10:13:23 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Yasunori Goto bc02af93dd [PATCH] pgdat allocation for new node add (specify node id)
Change the name of old add_memory() to arch_add_memory.  And use node id to
get pgdat for the node at NODE_DATA().

Note: Powerpc's old add_memory() is defined as __devinit. However,
      add_memory() is usually called only after bootup.
      I suppose it may be redundant. But, I'm not well known about powerpc.
      So, I keep it. (But, __meminit is better at least.)

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:35 -07:00
KAMEZAWA Hiroyuki 9c576ff1bc ACPI add ia64 exports to build acpi_memhotplug as a module
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-05-15 02:23:35 -04:00
Linus Torvalds d1127e40e8 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] ioremap() should prefer WB over UC
  [IA64] Add __mca_table to the DISCARD list in gate.lds
  [IA64] Move __mca_table out of the __init section
  [IA64] simplify some condition checks in iosapic_check_gsi_range
  [IA64] correct some messages and fixes some minor things
  [IA64-SGI] fix for-loop in sn_hwperf_geoid_to_cnode()
  [IA64-SGI] sn_hwperf use of num_online_cpus()
  [IA64] optimize flush_tlb_range on large numa box
  [IA64] lazy_mmu_prot_update needs to be aware of huge pages
2006-03-30 12:38:18 -08:00
Zhang, Yanmin 5e48521e86 [IA64] lazy_mmu_prot_update needs to be aware of huge pages
Function lazy_mmu_prot_update is also used on huge pages when it is called
by set_huge_ptep_writable, but it isn't aware of huge pages.

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Acked-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-27 10:15:41 -08:00
KAMEZAWA Hiroyuki ec936fc563 [PATCH] for_each_online_pgdat: renaming for_each_pgdat
Replace for_each_pgdat() with for_each_online_pgdat().

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:48 -08:00
Chen, Kenneth W 03906ea034 [IA64] add init declaration - nolwsys
Add __initdata to nolwsys.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-22 16:54:51 -08:00
Chen, Kenneth W 914a4ea441 [IA64] add init declaration - gate page functions
Add init declaration to bunch of patch functions and gate
page setup function.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-22 16:54:38 -08:00
Chen, Kenneth W dae2806615 [IA64] add init declaration to memory initialization functions
Add init declaration to variables/functions used for memory
initialization.  I don't think they would clash with memory
hotplug.  If they do, please yell.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-22 16:54:15 -08:00
Nick Piggin 7835e98b2e [PATCH] remove set_page_count() outside mm/
set_page_count usage outside mm/ is limited to setting the refcount to 1.
Remove set_page_count from outside mm/, and replace those users with
init_page_count() and set_page_refcounted().

This allows more debug checking, and tighter control on how code is allowed
to play around with page->_count.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 07:54:02 -08:00
Yasunori Goto 1681b8e158 [IA64] Simple memory hot-add for ia64.
First step to memory hotplug for ia64 (add only,
all new memory is added to node 0, does not use
ZONE_EASY_RECLAIM yet).

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-16 12:06:55 -08:00
Hugh Dickins 872fec16d9 [PATCH] mm: init_mm without ptlock
First step in pushing down the page_table_lock.  init_mm.page_table_lock has
been used throughout the architectures (usually for ioremap): not to serialize
kernel address space allocation (that's usually vmlist_lock), but because
pud_alloc,pmd_alloc,pte_alloc_kernel expect caller holds it.

Reverse that: don't lock or unlock init_mm.page_table_lock in any of the
architectures; instead rely on pud_alloc,pmd_alloc,pte_alloc_kernel to take
and drop it when allocating a new one, to check lest a racing task already
did.  Similarly no page_table_lock in vmalloc's map_vm_area.

Some temporary ugliness in __pud_alloc and __pmd_alloc: since they also handle
user mms, which are converted only by a later patch, for now they have to lock
differently according to whether or not it's init_mm.

If sources get muddled, there's a danger that an arch source taking
init_mm.page_table_lock will be mixed with common source also taking it (or
neither take it).  So break the rules and make another change, which should
break the build for such a mismatch: remove the redundant mm arg from
pte_alloc_kernel (ppc64 scrapped its distinct ioremap_mm in 2.6.13).

Exceptions: arm26 used pte_alloc_kernel on user mm, now pte_alloc_map; ia64
used pte_alloc_map on init_mm, now pte_alloc_kernel; parisc had bad args to
pmd_alloc and pte_alloc_kernel in unused USE_HPPA_IOREMAP code; ppc64
map_io_page forgot to unlock on failure; ppc mmu_mapin_ram and ppc64 im_free
took page_table_lock for no good reason.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:40 -07:00
Hugh Dickins 46dea3d092 [PATCH] mm: ia64 use expand_upwards
ia64 has expand_backing_store function for growing its Register Backing Store
vma upwards.  But more complete code for this purpose is found in the
CONFIG_STACK_GROWSUP part of mm/mmap.c.  Uglify its #ifdefs further to provide
expand_upwards for ia64 as well as expand_stack for parisc.

The Register Backing Store vma should be marked VM_ACCOUNT.  Implement the
intention of growing it only a page at a time, instead of passing an address
outside of the vma to handle_mm_fault, with unknown consequences.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:39 -07:00
Bob Picco 2d4b1fa234 [PATCH] V5 ia64 SPARSEMEM - SPARSEMEM code changes
This patch is the minimal set of changes required by ia64 to use SPARSEMEM.

Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-04 13:21:38 -07:00
Peter Chubb 6cf07a8cc8 [IA64] Fix nasty VMLPT problem...
I've solved the problem I was having with the simulator and not
booting Debian.

The problem is that the number of bits for the virtual linear array
short-format VHPT (Virtually mapped linear page table, VMLPT for
short) is being tested incorrectly. 

There are two problems:
      1. The PAL call that should tell the kernel the size of the
      virtual address space isn't implemented for the simulator, so
      the kernel uses the default 50.  This is addressed separately
      in dc90e95f31

      2.  In arch/ia64/mm/init.c there's code to calcualte the size
      of the VMLPT based on the number of implemented virtual address
      bits and the page size.  It checks to see if the VMLPT base
      address overlaps the top of the mapped region, but this check
      doesn't allow for the address space hole, and in fact will
      never trigger.

Here's an alternative test and panic, that I think is more accurate.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-31 08:35:22 -07:00
bob.picco 564601a5d1 [IA64] memory-less-nodes repost
I reworked how nodes with only CPUs are treated.  The patch below seems
simpler to me and has eliminated the complicated routine
reassign_cpu_only_nodes.  There isn't any longer the requirement
to modify ACPI NUMA information which was in large part the
complexity introduced in reassign_cpu_only_nodes. 

This patch will produce a different number of nodes. For example,
reassign_cpu_only_nodes would reduce two CPUonly nodes and one memory node
configuration to one memory+CPUs node configuration.  This patch
doesn't change the number of nodes which means the user will see three.  Two
nodes without memory and one node with all the memory.

While doing this patch, I noticed that early_nr_phys_cpus_node isn't serving
any useful purpose.  It is called once in find_pernode_space but the value
isn't used to computer pernode space.  

Signed-off-by: bob.picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:45:30 -07:00
David Mosberger-Tang ad597bd518 [IA64] Fill holes in FIXADDR_USER space with zero pages.
This fixes an oops reported by Jason Baron.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-08 10:58:21 -07:00
Tony Luck e96c9b4779 [IA64] MAX_PGT_FREES_PER_PASS must be 'L' to avoid warning
'min' is very picky about types of arguments, make it happy

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25 13:16:59 -07:00
Robin Holt fde740e4dd [IA64] Percpu quicklist for combined allocator for pgd/pmd/pte.
This patch introduces using the quicklists for pgd, pmd, and pte levels
by combining the alloc and free functions into a common set of routines.
This greatly simplifies the reading of this header file.

This patch is simple but necessary for large numa configurations.
It simply ensures that only pages from the local node are added to a
cpus quicklist.  This prevents the trapping of pages on a remote nodes
quicklist by starting a process, touching a large number of pages to
fill pmd and pte entries, migrating to another node, and then unmapping
or exiting.  With those conditions, the pages get trapped and if the
machine has more than 100 nodes of the same size, the calculation of
the pgtable high water mark will be larger than any single node so page
table cache flushing will never occur.

I ran lmbench lat_proc fork and lat_proc exec on a zx1 with and without
this patch and did not notice any change.

On an sn2 machine, there was a slight improvement which is possibly
due to pages from other nodes trapped on the test node before starting
the run.  I did not investigate further.

This patch shrinks the quicklist based upon free memory on the node
instead of the high/low water marks.  I have written it to enable
preemption periodically and recalculate the amount to shrink every time
we have freed enough pages that the quicklist size should have grown.
I rescan the nodes zones each pass because other processess may be
draining node memory at the same time as we are adding.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25 13:13:16 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00