Commit Graph

513 Commits

Author SHA1 Message Date
Balaji T K fa0d976298 mfd: Add twl6030 base addr for ID0, ID1, ID2
Add base address for generic slave ID0, ID1, ID2
and introduced one more entry to align RTC module number between
twl4030 and twl6030

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:24 +01:00
Moiz Sonasath a29aaf55cd mfd: Disable TWL4030/5030 I2C1/I2C4 internal pull-ups
This patch disables TWL4030/5030 I2C1 adn I2C4(SR) internal pull-up, to
use only the external HW resistor >=470 Ohm for the assured
functionality in HS mode.

While testing the I2C in High Speed mode, it was discovered that
without a proper pull-up resistor, there is data corruption during
multi-byte transfer. RTC(time_set) test case was used for testing.

From the analysis done, it was concluded that ideally we need a
pull-up of 1.6k Ohm(recomended) or atleast 470 Ohm or greater for
assured performance in HS mode.

Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Allen Pais <allen.pais@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:23 +01:00
Denis Turischev e82c60ae7d mfd: Introduce lpc_sch for Intel SCH LPC bridge
Intel Poulsbo (SCH) chipset LPC bridge controller contains several
functions. Creating and MFD driver for the LPC bridge controller allows
simultaneous use of SMBus and GPIO interfaces on the SCH.

Signed-off-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:22 +01:00
Samuel Ortiz 91fedede03 mfd: Check for ACPI conflicts
For ACPI based systems, we should check for ACPI conflicts when adding the
platform devices. The test will always succeed for non ACPI platforms.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:21 +01:00
Eduardo Valentin 14e5c82ca3 mfd: Fix twl_has_pwrbutton typo
Change the typo CONFIG_INPUT_TWL4030_PWBUTTON_MODULE in the
twl_has_pwrbutton definition to CONFIG_INPUT_TWL4030_PWRBUTTON_MODULE.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:21 +01:00
Haojian Zhuang 2afa62ea76 mfd: Use genirq in 88pm860x
Use genirq to simplify IRQ handling in 88pm860x. Remove the interface of
mask/free IRQs on 88pm860x. All these work is taken by genirq. Update the
touchscreen driver of 88pm860x since IRQ handling is changed.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:20 +01:00
Joonyoung Shim 7731074ab2 mfd: Fix WM8994 error handling
This patch fixes wrong goto statement for error handling on probe.

Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:19 +01:00
Haojian Zhuang e8343ddacc mfd: Use i2c_dummy in 88pm860x
Use i2c_dummy in 88pm860x driver to avoid using static in probe function.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:18 +01:00
Haojian Zhuang 1f1cf8f98c mfd: Update irq handler in max8925
Update thread irq handler. Simply the interface of using thread irq.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:16 +01:00
Haojian Zhuang b13c0df517 mfd: Update i2c driver for max8925
Update I2C driver in order to fit all of three I2C components in max8925.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:15 +01:00
Mike Turquette 1ea933f4cd mfd: Program twl4030 remap_sleep correctly
Variable remap was incorrectly referencing remap_off for the remap_sleep
case when configuring TWL4030 power scripts.

Signed-off-by: Mike Turquette <mturquette@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:14 +01:00
Mark Brown 9e50108668 mfd: Add initial WM8994 support
The WM8994 is a highly integrated ultra low power audio hub CODEC.
Since it includes on-board regulators and GPIOs it is represented
as a multi-function device, though the overwhelming majority of
the functionality is provided by the ASoC CODEC driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:13 +01:00
Randy Dunlap bef3e20c9f mfd: htc-i2cpld depends on GPIOLIB
htc-i2cpld should depend on GPIOLIB, otherwise there are many
build errors:

drivers/mfd/htc-i2cpld.c:50: error: field 'chip_out' has incomplete type
drivers/mfd/htc-i2cpld.c:54: error: field 'chip_in' has incomplete type
drivers/mfd/htc-i2cpld.c:243: warning: type defaults to 'int' in declaration of '__mptr'
drivers/mfd/htc-i2cpld.c:243: warning: initialization from incompatible pointer type
drivers/mfd/htc-i2cpld.c:278: warning: type defaults to 'int' in declaration of '__mptr'
drivers/mfd/htc-i2cpld.c:278: warning: initialization from incompatible pointer type
drivers/mfd/htc-i2cpld.c:282: warning: type defaults to 'int' in declaration of '__mptr'
drivers/mfd/htc-i2cpld.c:282: warning: initialization from incompatible pointer type
drivers/mfd/htc-i2cpld.c:315: error: dereferencing pointer to incomplete type
drivers/mfd/htc-i2cpld.c:322: warning: type defaults to 'int' in declaration of '__mptr'
drivers/mfd/htc-i2cpld.c:322: warning: initialization from incompatible pointer type
drivers/mfd/htc-i2cpld.c:467+: error: dereferencing pointer to incomplete type [19X]
drivers/mfd/htc-i2cpld.c:490: error: implicit declaration of function 'gpiochip_add'
drivers/mfd/htc-i2cpld.c:504: error: implicit declaration of function 'gpiochip_remove'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:12 +01:00
Christoph Egger f7ea2dc59e mfd: Remove leftover from discontinued TWL4030 battery patch
The TWL4030_BCI_BATTERY config option originates from a patch to the
omap git tree. However inclusion in linux was seemingly rejected and
the functionality nears inclusion under a different name so this
removes the bits of the old version that made it into the mainline
kernel again.

Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:11 +01:00
Linus Walleij ca229f1b62 mfd: Fix debugfs code in AB3100 OTP driver
This fixes the aged and unreachable debugfs code in the AB3100
OTP driver so that it's (A) reachable and (B) works. Bug detected
in parallell by Christoph Egger using VAMOS and Robert P. J. Day
by his kernel scanning script.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Cc: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:11 +01:00
Linus Walleij 2071db4848 mfd: Use AB3100 MFD core IRQ for interrupt randomness
This reintroduces the entropy sampling of the AB3100 IRQ as the
IRQF_SAMPLE_RANDOM is going out according to the feature removal
schedule. I'm trying to do this the right way then, so CC:ing some
random people for a quick review. We add entropy for interrupt
events in the AB3100 which are truly random in nature, like
external cables being connected, voltages on batteries dropping
below certain ranges, ADC triggers or overheating.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Robin Getz <rgetz@blackfin.uclinux.org>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:10 +01:00
Cory Maccarrone 6048a3dd23 mfd: Add HTCPLD driver
This change introduces a driver for the HTC PLD chip found
on some smartphones, such as the HTC Wizard and HTC Herald.
It works through the I2C bus and acts as a GPIO extender.
Specifically:

 * it can have several sub-devices, each with its own I2C
   address
 * Each sub-device provides 8 output and 8 input pins
 * The chip attaches to one GPIO to signal when any of the
   input GPIOs change -- at which point all chips must be
   scanned for changes

This driver implements the GPIOs throught the kernel's
GPIO and IRQ framework.  This allows any GPIO-servicing
drivers to operate on htcpld pins, such as the gpio-keys
and gpio-leds drivers.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:09 +01:00
Haojian Zhuang 1ad998934e mfd: Add subdevs in max8925
Add subdevs in MAX8925. MAX8925 includes regulator, backlight and touch
components.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:07 +01:00
Haojian Zhuang d50f8f339f mfd: Initial max8925 support
Basic Max8925 support, which is a power management IC from Maxim
Semiconductor.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:06 +01:00
Haojian Zhuang a16122bcac mfd: Append subdev into 88pm860x driver
Append backlight, led & touch subdevs into 88pm860x driver.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:04 +01:00
Haojian Zhuang 5c42e8c4a9 mfd: Add irq support in 88pm860x
88PM860x is a complex PMIC device. It contains touch, charger, sound, rtc,
backlight, led, and so on.

Host communicates to 88PM860x by I2C bus. Use thread irq to support this
usage case.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:03 +01:00
Haojian Zhuang 2cc50bee99 mfd: Rename 88pm8607 to 88pm860x in mfd
Rename 88PM8607 to 88PM860X in both Makefile and Kconfig under mfd directory.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:02 +01:00
Haojian Zhuang 53dbab7af9 mfd: Support 88pm8606 in 860x driver
88PM8606 and 88PM8607 are two discrete chips used for power management.
Hardware designer can use them together or only one of them according to
requirement.

There's some logic tightly linked between these two chips. For example, USB
charger driver needs to access both chips by I2C interface.

Now share one driver to these two devices. Only one I2C client is identified
in platform init data. If another chip is also used, user should mark it in
companion_addr field of platform init data. Then driver could create another
I2C client for the companion chip.

All I2C operations are accessed by 860x-i2c driver. In order to support both
I2C client address, the read/write API is changed in below.

reg_read(client, offset)
reg_write(client, offset, data)

The benefit is that client drivers only need one kind of read/write API. I2C
and MFD driver can be shared in both 8606 and 8607.

Since API is changed, update API in 8607 regulator driver.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:01 +01:00
Haojian Zhuang bbd51b1ff1 mfd: Split 88pm8607 driver
Create 88pm8607-i2c driver to support all I2C operation of 88PM8607.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:01 +01:00
Linus Walleij 0df883df8e mfd: Convert AB3100 driver to threaded IRQ
This converts the AB3100 core MFD driver to use a threaded
interrupt handler instead of the explicit top/bottom-half
construction with a workqueue. This saves some code and make it
more similar to other modern MFD drivers.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:00 +01:00
Mark Brown ecf926bcda mfd: Don't allow WM8350 to be built modular
The genirq implementation does not allow modules to implement irq_chips
so the conversion of WM8350 to genirq means we can no longer allow the
driver to be built as a module.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:16:58 +01:00
Mark Brown 760e451878 mfd: Convert WM8350 to genirq
This gives us use of the diagnostic facilities genirq provides and
will allow implementation of interrupt support for the WM8350 GPIOs.
Stub functions are provided to ease the transition of the individual
drivers, probably after additional work to pass the IRQ numbers via
the struct devices.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:16:57 +01:00
Mark Brown f99344fc69 mfd: Add a data argument to the WM8350 IRQ free function
To better match genirq.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:16:56 +01:00
Julia Lawall 0e820ab601 mfd: Correct use after free for t7l66xb
The structure t7l66xb should not be freed before the subsequent references
to its fields in the arguments to clk_put.  Furthermore, this structure is
allocated near the beginning of the function, and a goto to the label
err_noirq appears after a successful allocation, so it would seem that the
kfree should be moved down below this label.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,e;
identifier f;
iterator I;
statement S;
@@

*kfree(x);
... when != &x
    when != x = e
    when != I(x,...) S
*x->f
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
2010-03-07 22:16:55 +01:00
H Hartley Sweeten 1ecc09e765 mfd: Use resouce_size for tc6393xb
Use resource_size() for ioremap.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:16:54 +01:00
H Hartley Sweeten c02e6a5ff4 mfd: Use resource_size() for t7l66xb
Use resource_size() for ioremap.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:16:53 +01:00
H Hartley Sweeten 311e54c07e mfd: Use resource_size() in sm501
The requested memory region is smaller than the actual ioremap().
Use resource_size() to get the correct size.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:16:52 +01:00
Uwe Kleine-König 86c3400810 mfd/mc13783: new function reading irq mask and status register
The driver for the mc13783 rtc needs to know if the TODA irq is pending.

Instead of tracking in the rtc driver if the irq is enabled provide that
information, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:47 -08:00
Uwe Kleine-König 57205026da mc13783: rename mc13783_{{un,}mask,ack_irq} to have a mc13783_irq prefix
In the source file group these functions together.

The mc13783 header file provides fallback implementations for the old
names to prevent build failures.  When all users of the old names are
fixed to use the new names these can go away.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:47 -08:00
Akinobu Mita 984b3f5746 bitops: rename for_each_bit() to for_each_set_bit()
Rename for_each_bit to for_each_set_bit in the kernel source tree.  To
permit for_each_clear_bit(), should that ever be added.

The patch includes a macro to map the old for_each_bit() onto the new
for_each_set_bit().  This is a (very) temporary thing to ease the migration.

[akpm@linux-foundation.org: add temporary for_each_bit()]
Suggested-by: Alexey Dobriyan <adobriyan@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:23 -08:00
Tony Lindgren d702d12167 Merge with mainline to remove plat-omap/Kconfig conflict
Conflicts:
	arch/arm/plat-omap/Kconfig
2010-03-01 14:19:05 -08:00
Linus Torvalds 524df55725 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (252 commits)
  ASoC: Check progress when reporting periods from i.MX FIQ handler
  ASoC: Remove a unused variables from i.MX FIQ runtime data
  ALSA: hda - Add/fix ALC269 FSC and Quanta models
  ALSA: hda - Add ALC670 codec support
  OMAP4: PMIC: Add support for twl6030 codec
  ALSA: hda - remove unnecessary msleep on power state transitions
  usb/gadget/{f_audio,gmidi}.c: follow recent changes in audio.h
  ASoC: fsi: Modify over/under run error settlement
  ASoC: OMAP4: Add McPDM platform driver
  ASoC: OMAP4: Add support for McPDM
  ASoC: OMAP: data_type and sync_mode configurable in audio dma
  ALSA: hda - Add missing description in HD-Audio-Models.txt
  ALSA: add support for Macbook Air 2,1 internal speaker
  ALSA: usbaudio: consolidate header files
  ALSA: usbmixer: bail out early when parsing audio class v2 descriptors
  ALSA: usbaudio: implement basic set of class v2.0 parser
  ALSA: usbaudio: introduce new types for audio class v2
  ALSA: usbaudio: parse USB descriptors with structs
  ALSA: hda - enable snoop for Intel Cougar Point
  ALSA: hda - Remove identical definitions for macmini3 model
  ...
2010-03-01 08:58:44 -08:00
Takashi Iwai 6679ee1870 Merge branch 'topic/asoc' into for-linus 2010-03-01 12:38:59 +01:00
Richard Röjfors 071193ff41 V4L/DVB: mfd: Add timb-radio to the timberdale MFD
This patch addes timb-radio to all configurations of the timberdale MFD.

Connected to the FPGA is a TEF6862 tuner and a SAA7706H DSP, the I2C
board info of these devices is passed via the timb-radio platform data.

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Cc: sameo@linux.intel.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:03 -03:00
Randy Dunlap 546e29b66a V4L/DVB: timberdale: fix mfd build
Fix mfd/timberdale build error -- add depends GPIOLIB.

include/linux/spi/max7301.h:14: error: field 'chip' has incomplete type
build-r7353.out:make[3]: *** [drivers/mfd/timberdale.o] Error 1

Repairs

commit ff7a26e08a16bb31158d830dbf60db2ff47019ab
Author:     Richard R<C3><B6>jfors <richard.rojfors@pelagicore.com>
AuthorDate: Thu Feb 4 08:18:52 2010 -0300
Commit:     Mauro Carvalho Chehab <mchehab@redhat.com>
CommitDate: Fri Feb 5 12:25:37 2010 -0200

    V4L/DVB: mfd: Add support for the timberdale FPGA

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Richard Rojfors <richard.rojfors@pelagicore.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:01 -03:00
Richard Röjfors 8edbede9eb V4L/DVB: mfd: Add support for the timberdale FPGA
The timberdale FPGA is found on the Intel in-Vehicle Infotainment reference board
russelville.

The driver is a PCI driver which chunks up the I/O memory and distributes interrupts
to a number of platform devices for each IP inside the FPGA.

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:56 -03:00
Misael Lopez Cruz d62abe563f OMAP4: PMIC: Add support for twl6030 codec
In order to have TWL6030 CODEC driver as a platform driver, codec data
should be passed through twl_platform_data structure.

For twl6030 audio codec, the following data may be passed:
    - audpwron_gpio: gpio line used to power-up/down the codec. A low-to-high
      transition powers codec up. Setting audpwron_gpio to a negative value
      means that codec will use manual power sequence instead of automatic
      sequence
    - naudint_irq: irq line for audio interrupt. twl6030 drives NAUDINT line
      to low when an interrupt (codec ready, plug insertion/removal, etc) is
      detected

However, codec driver can operate if any or none of them are passed.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-24 13:17:03 +00:00
Tony Lindgren 088ef950dc omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2
Convert ARCH_OMAP24XX to ARCH_OMAP2

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 09:27:01 -08:00
Daniel Mack 3ad2f3fbb9 tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:13:56 +01:00
Dmitry Artamonow 4995c0b367 mfd: Fix asic3 build
asic3 also needs tmio_core or otherwise will fail to build.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-29 21:03:09 +01:00
Alberto Panizzo 1e02b2c324 mfd: Unlock mc13783 before subsystems initialisation, at probe time.
With this, mc13783 subsystems drivers can configure the mc13783 chip
reading and writing registers.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18 12:30:28 +01:00
Mark Brown 8e6ba2dfa2 mfd: WM835x GPIO direction register is not locked
No need to set the security key when writing to it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18 12:30:28 +01:00
Ian Molton 64e8867ba8 mfd: tmio_mmc hardware abstraction for CNF area
This patch abstracts out the CNF area code from tmio_mmc which
is not present in all hardware that can use this driver. This
is required so that we can support non-toshiba based hardware.

ASIC3 support by Philipp Zabel

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18 12:30:27 +01:00
Dan Carpenter 6f2af72a24 mfd: WM8350 off by one bug
If irq == WM8350_NUM_IRQ that would put us past the end of the array.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18 12:30:26 +01:00
Linus Torvalds cd6e125c58 twl4030-irq.c: fix compiler warning due to raw-spinlock conversion
Commit 239007b844 ("genirq: Convert irq_desc.lock to raw_spinlock")
seems to have missed this driver, leaving it to use the normal spin-lock
functions for the irq descriptor lock, which is now a raw lock.

Reported-and-compile-tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-31 17:26:05 -08:00
Stephen Rothwell 8bea8672ed mfd: compile fix for twl4030 renaming
Caused by commit 0b83ddebc6 ("MFD:
twl4030: add twl4030_codec MFD as a new child to the core") interacting
with commit b07682b605 ("mfd: Rename
twl4030* driver files to enable re-use").

This file seems to have been missed in the renaming.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 09:33:36 -08:00
Linus Torvalds 48e902f0a3 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  power_supply_sysfs: Handle -ENODATA in a special way
  wm831x_backup: Remove unused variables
  gta02: Set pcf50633 charger_reference_current_ma
  pcf50633: Query charger status directly
  pcf50633: Properly reenable charging when the supply conditions change
  pcf50633: Get rid of charging restart software auto-triggering
  pcf50633: introduces battery charging current control
  pcf50633: Add ac power supply class to the charger
  wm831x: Factor out WM831x backup battery charger
2009-12-15 08:59:33 -08:00
Rajendra Nayak 9da6653928 mfd: Add twl6030 regulator subdevices
This patch adds initial support for creating twl6030 PMIC
specific voltage regulators in the twl mfd driver.

Board specific regulator configurations will have to be passed from
respective board files.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-14 00:26:26 +01:00
Balaji T K e8deb28ca8 mfd: Add support for twl6030 irq framework
This patch adds support for phoenix interrupt framework. New iInterrupt
status register A, B, C are introduced in Phoenix and are cleared on write.
Due to the differences in interrupt handling with respect to TWL4030,
twl6030-irq.c is created for TWL6030 PMIC

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-14 00:25:31 +01:00
Rajendra Nayak c4aa6f3143 mfd: Rename twl4030_ routines in twl-regulator.c
This patch renames all twl4030_ functions to twl so that regulator driver
can be reused by Triton - TWL4030 and Phoenix - TWL6030.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 21:36:49 +01:00
Balaji T K ef3b7d0d3e mfd: Rename twl4030_ routines in rtc-twl.c
This patch renames all twl4030_ functions to twl_ so that RTC driver can be
shared between Triton and Phoenix.

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Nayak Rajendra <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 21:30:48 +01:00
Balaji T K fc7b92fca4 mfd: Rename all twl4030_i2c*
This patch renames function names like twl4030_i2c_write_u8,
twl4030_i2c_read_u8 to twl_i2c_write_u8, twl_i2c_read_u8
and also common variable in twl-core.c

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 21:23:33 +01:00
Santosh Shilimkar b07682b605 mfd: Rename twl4030* driver files to enable re-use
The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030
for OMAP3. The common modules like RTC, Regulator creates opportunity
to re-use the most of the code from twl4030.

This patch renames few common drivers twl4030* files to twl* to enable
the code re-use.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 20:05:51 +01:00
Amit Kucheria 147e084792 mfd: Clarify twl4030 return value for read and write
We should be checking if all the messages were tranferred. If not, then we
should propagate the i2c core error code or EIO.
Currently we return success (0) even if none of messages were transferred
successfully.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:22:00 +01:00
Juha Keski-Saari ab4abe056d mfd: Add all twl4030 regulators to the twl4030 mfd driver
Add all twl4030 regulators to the twl4030 mfd driver and
twl4030_platform_data

Signed-off-by: Juha Keski-Saari <ext-juha.1.keski-saari@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:59 +01:00
Uwe Kleine-König be26d664de mfd: Don't set mc13783 ADREFMODE for touch conversions
Setting ADREFMODE is utter nonsense, but that's hard to read out of the
spec.  Strange enough it's possible to read x and y values even when
it's set.  When unset you can get values not only for the axes, but also
for contact resistance which allows the touch driver to report pressure
values.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:57 +01:00
Uwe Kleine-König 9e2726776d mfd: Near complete mc13783 rewrite
This fixes several things while still providing the old API:

 - simplify and fix locking
 - better error handling
 - don't ack all irqs making it impossible to detect a reset of the
   rtc
 - use a timeout variant to wait for completion of ADC conversion
 - provide platform-data to regulator subdevice (This allows making
   struct mc13783 opaque for other drivers after the regulator driver is
   updated to use its platform_data.)
 - expose all interrupts
 - use threaded irq

After all users in mainline are converted to the new API, some things
(e.g. mc13783-private.h) can go away.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:54 +01:00
Mark Brown d7f81c4416 mfd: Remove build time warning for WM835x register default tables
Systems using the WM835x need to choose which of the default register
settings are required on the system.  Currently there is a compile time
warning as well as a runtime error intended to flag up to users that
this is required but this also triggers for people building the driver
in order to obtain build coverage.

Remove the build warning, leaving only the runtime error, in order to
reduce noise for people doing generic kernel work.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:53 +01:00
Mark Brown 0125350382 mfd: Force I2C to be built in when building WM831x
This works around issues with allmodconfig where it won't propagate the
dependency from the WM831x core back to the I2C and MFD cores.  When
doing allmodconfig this causes WM831x to be omitted and ensures that in
normal builds the dependencies get shaken out.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:51 +01:00
Mark Brown 6e40173de9 mfd: Don't allow wm831x to be built as a module
The genirq infrastructure functions aren't currently exported,
preventing modular builds.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:48 +01:00
Dan Carpenter cb9b224500 mfd: Fix incorrect error check for wm8350-core
It was *pdev which was allocated not pdev.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:47 +01:00
Alan Cox 89f5f9f79e mfd: Fix twl4030 warning
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:45 +01:00
Linus Walleij ecba96e696 mfd: Remove default selection of AB4500
This remove the default 'y' selection of AB4500, currently everyone
enabling the SPI subsystem will get a copy of this driver.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:42 +01:00
Mark Brown 5fb4d38b19 mfd: Move WM831x to generic IRQ
Replace the wm831x-local IRQ infrastructure with genirq, allowing access
to the diagnostic infrastructure of genirq and allowing us to implement
interrupt support for the GPIOs.  The switchover is done within the
wm831x specific IRQ API, further patches will convert the individual
drivers to use genirq directly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:41 +01:00
Ilkka Koskinen 1920a61e20 mfd: Initial support for twl5031
TWL5031 introduces two new interrupts in PIH. Moreover, BCI
has changed remarkably and, thus, it's disabled when TWL5031
is in use.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:41 +01:00
Mark Brown 6a6127462e mfd: Mask and unmask wm8350 IRQs on request and free
Bring the WM8350 IRQ API more in line with the generic IRQ API by
masking and unmasking interrupts as they are requested and freed.
This is mostly just a case of deleting the mask and unmask calls
from the individual drivers.

The RTC driver is changed to mask the periodic IRQ after requesting
it rather than only unmasking the alarm IRQ. If the periodic IRQ
fires in the period where it is reqested then there will be a
spurious notification but there should be no serious consequences
from this.

The CODEC drive is changed to explicitly disable headphone jack
detection prior to requesting the IRQs. This will avoid the IRQ
firing with no jack set up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:40 +01:00
Mark Brown 5a65edbc12 mfd: Convert wm8350 IRQ handlers to irq_handler_t
This is done as simple code transformation, the semantics of the
IRQ API provided by the core are are still very different to those
of genirq (mainly with regard to masking).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:39 +01:00
Antonio Ospite b9f96b5dcb mfd: ezx-pcap: Don't pass pcap pointer as subdev drvdata.
Abusing subdev drvdata is not needed anymore, as all pcap subdevs are now
retrieving the pcap pointer from their parent device.

This change removes a leftover coming from early versions of ezx-pcap and its
subdevs drivers.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:38 +01:00
Ben Dooks b45440c33a mfd: Allow configuration of VDCDC2 for tps65010
Add function to allow the configuation fo the VDCDC2 register by
external users, to allow changing of the standard and low-power
running modes.

This is needed, for example, for the Simtec IM2440D20 where we need
to use the low-power mode to shutdown the LDO/DCDC that are not needed
during suspend (saving substantial power) and the runtime use of the
low-power mode to change VCore.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:36 +01:00
Ben Dooks 8483699266 mfd: Allow the board to choose any GPIO base for tps65010
If the board does not care where the TPS turns up, then specifiying the
value -1 to get gpiolib to dynamically allocate the base for the chip
is valid.

Change the test to look for != 0, so that any boards specifying zero
will not end up with gpio that they didn't want.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Liunx Team <linux@simtec.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:34 +01:00
Ilkka Koskinen 38a684963f mfd: Enable twl4030 32kHz oscillator low-power mode
Allows TWL's 32kHz oscillator to go in low-power mode when
main battery voltage is running low.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:33 +01:00
Amit Kucheria 53cf9a605d mfd: Fix more undefined twl4030-power resconfig value checks
Based on Aaro's previous fix, this needs to be fixed for the newly added
remap_off and remap_sleep resources as well.

The code tries to skip values initialized with -1, but since the values
are unsigned the comparison is always true.

The patch eliminates the following compiler warnings:

drivers/mfd/twl4030-power.c: In function 'twl4030_configure_resource':
drivers/mfd/twl4030-power.c:338: warning: comparison is always true due to
limited range of data type

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:30 +01:00
Lars-Peter Clausen 24213ae19a mfd: Cleanup pcf50633_probe error handling
Currently the child devices were not freed if the irq could not be requested.
This patch restructures the function, that in case of an error all previously
allocated resources are freed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:28 +01:00
Mark Brown 4e8b70265c mfd: Staticise __adp5520_ack_bits()
The function is not exported as the __ indicates. __

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:26 +01:00
Aaro Koskinen 56baa66797 mfd: fix undefined twl4030-power resconfig value checks
The code tries to skip values initialized with -1, but since the values
are unsigned the comparison is always true.

The patch eliminates the following compiler warnings:

drivers/mfd/twl4030-power.c: In function 'twl4030_configure_resource':
drivers/mfd/twl4030-power.c:338: warning: comparison is always true due to
limited range of data type
drivers/mfd/twl4030-power.c:358: warning: comparison is always true due to
limited range of data type
drivers/mfd/twl4030-power.c:363: warning: comparison is always true due to
limited range of data type

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:25 +01:00
Amit Kucheria b4ead61e57 mfd: Add support for remapping twl4030-power power states
The <RESOURCE>_REMAP register allows configuration of the <RESOURCE> in case
of a sleep or off transition.

Allow this property of resources to be configured (through twl4030_resconfig)
and add code to parse these values to program the registers accordingly.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:24 +01:00
Amit Kucheria 890463f0ff mfd: Add comments for the twl4030-power register and bit layout
Describe how the resource registers are laid out and the various bit-fields in
them.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:22 +01:00
Amit Kucheria e97d15469f mfd: twl4030-power: Rename DEVGROUP to DEV_GRP
Stick to the names used in the reference manual

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:21 +01:00
Lars-Peter Clausen 98c2e49030 mfd: Fix pcf50633-regulator drvdata usage
Currently the pcf50633-regulator driver data is set to the pcf50633 core
structure, but the pcf50633-regulator remove handler assumes that it is set to
the regulator device. This patch fixes the issue by accessing the pcf506533
core structure through its parent device and setting the driver data to the
regulator device.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:20 +01:00
Lars-Peter Clausen bbb2e496f7 mfd: Use platform_device_add_data to set pcf50633 regulator platform data
Platform devices allocated with platform_device_alloc should use
platform_device_add_data to set the platform data, because kfree will be called
on the platform_data when the device is released.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:18 +01:00
Lars-Peter Clausen 68d641efd8 mfd: Fix memleak in pcf50633_client_dev_register
Since platform_device_add_data copies the passed data, the allocated
subdev_pdata is never freed. A simple fix would be to either free subdev_pdata
or put it onto the stack. But since the pcf50633 child devices can rely on
beeing children of the pcf50633 core device it's much more elegant to get access
to pcf50633 core structure through that link. This allows to get completly rid
of pcf5033_subdev_pdata.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:17 +01:00
Arnaud Patard b18fdc4b3e mfd: Move pcf50633 messages to appropriate log levels
IRQs masking/unmasking should be less verbose.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:15 +01:00
Lars-Peter Clausen 25993e4e42 mfd: Make pcf50633 suspend/resume belong to i2c_driver
When not using the i2c suspend/resume callbacks the i2c client resumed
before the i2c master.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:12 +01:00
Paul Fertser 06b1cc9c05 mfd: Disable unnecessary pcf50633 shutdown on lowsys
On gta02 hardware revision A5 it can actually bring the system down
during normal operating conditions so we disable it.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:07 +01:00
Mark Brown 0c7229f93a mfd: Convert WM835x IRQ handling to use a data table
Rather than open coding individual IRQs in each function which
manipulates them store data for IRQs in a table which is then
referenced in the users.

This is a substantial code shrink and should be a performance win in
cases where only a single IRQ goes off at once since instead of
reading four of the second level IRQ registers for each interrupt
we read only the sub-registers which have had an interrupt flagged.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:02 +01:00
Mark Brown e0a3389ab9 mfd: Split wm8350 IRQ code into a separate file
In preparation for refactoring - it's over 700 lines of well-isolated
code and having it in a file by itself makes things more managable.

While we're at it make sure that we clean up the IRQ if we fail after
acquiring it on init.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:55 +01:00
Michael Hennerich a5736e0b62 mfd: Add ADP5520/ADP5501 driver
Base driver for Analog Devices ADP5520/ADP5501 MFD PMICs

Subdevs:
LCD Backlight   : drivers/video/backlight/adp5520_bl.c
LEDs            : drivers/led/leds-adp5520.c
GPIO            : drivers/gpio/adp5520-gpio.c (ADP5520 only)
Keys            : drivers/input/keyboard/adp5520-keys.c (ADP5520 only)

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:53 +01:00
Haojian Zhuang 15e0ff7a0c mfd: Fix 88PM8607 I2C dependency
88PM8607 depends on I2C and MFD_CORE. Since 88PM8607 is built-in
kernel, it also requires that I2C and MFD_CORE are built-in
kernel also.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:48 +01:00
Uwe Kleine-König 1e3edaf6c0 mfd: Move asic3_remove to .devexit.text
The function asic3_remove is used only wrapped by __devexit_p so define
it using __devexit.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:46 +01:00
Mark Brown d4e0a89e3d mfd: Add support for WM8320 PMICs
The WM8320 is an integrated power management subsystem providing
voltage regulators, RTC, watchdog and other functionality. The
WM8320 is derived from the WM831x and therefore shares most of
the driver code with the WM831x.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:44 +01:00
Mark Brown 6f2ecaae72 gpiolib: Make WM831x GPIO count dynamic
This supports future devices with fewer GPIOs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:43 +01:00
Mark Brown 894362f531 mfd: Refactor WM831x chip identification
Better support future device revisions by moving some of the output
around and making the chip ID enumeration be the value expected in
the ID register.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:42 +01:00
Jean Delvare 29f02646f0 mfd: Don't abuse i2c_client.name
The name field of struct i2c_client is for i2c-core's use, it should
never be changed by the drivers themselves.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:40 +01:00
Samuel Ortiz 956266da70 mfd: Fix ab4500 compilation warnings
When building the driver as a module, module_exit was missing, and
subsys_initcall_sync() is not defined.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:39 +01:00
Srinidhi Kasagar 0c41839e98 mfd: add AB4500 driver
This adds core driver support for AB4500 mixed signal
multimedia & power management chip. This connects to U8500
on the SSP (pl022) and exports read/write functions for
the device to get access to this chip. This also registers
the client devices and sets the parent.

Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Reviewed-by: Mark Brown <broonie@sirena.org.uk>
Reviewed-by: Jean-Christophe <plagnioj@jcrosoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:38 +01:00
Haojian Zhuang 4107da2a28 mfd: Add 88PM8607 driver
This adds a core driver for 88PM8607 found in Marvell DKB development
platform. This driver is a proxy for all accesses to 88PM8607
sub-drivers which will be merged on top of this one, RTC, regulators,
battery and so on.

This chip is manufactured by Marvell.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:37 +01:00
Linus Torvalds fa395aaec8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits)
  Input: appletouch - give up maintainership
  Input: dm355evm_kbd - switch to using sparse keymap library
  Input: wistron_btns - switch to using sparse keymap library
  Input: add generic support for sparse keymaps
  Input: fix memory leak in force feedback core
  Input: wistron - remove identification strings from DMI table
  Input: psmouse - remove identification strings from DMI tables
  Input: atkbd - remove identification strings from DMI table
  Input: i8042 - remove identification strings from DMI tables
  DMI: allow omitting ident strings in DMI tables
  Input: psmouse - do not carry DMI data around
  Input: matrix-keypad - switch to using dev_pm_ops
  Input: keyboard - fix lack of locking when traversing handler->h_list
  Input: gpio_keys - scan gpio state at probe and resume time
  Input: keyboard - add locking around event handling
  Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller
  Input: xpad - add two new Xbox 360 devices
  Input: polled device - do not start polling if interval is zero
  Input: polled device - schedule first poll immediately
  Input: add S3C24XX touchscreen driver
  ...
2009-12-09 19:52:01 -08:00
Linus Torvalds 3a43aaa317 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (137 commits)
  sh: include empty zero page in romImage
  sh: Make associative cache writes fatal on all SH-4A parts.
  sh: Drop associative writes for SH-4 cache flushes.
  sh: Partial revert of copy/clear_user_highpage() optimizations.
  sh: Add default uImage rule for se7724, ap325rxa, and migor.
  sh: allow runtime pm without suspend/resume callbacks
  sh: mach-ecovec24: Remove un-defined settings for VPU
  sh: mach-ecovec24: LCDC drive ability become high
  sh: fix sh7724 VEU3F resource size
  serial: sh-sci: Fix too early port disabling.
  sh: pfc: pr_info() -> pr_debug() cleanups.
  sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines.
  sh: Improve kfr2r09 serial port setup code
  sh: Break out SuperH PFC code
  sh: Move KEYSC header file
  sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file
  sh: Add CPG save/restore code for sh7724 R-standby
  sh: Add SDHI power control support to Ecovec
  mfd: Add power control platform data to SDHI driver
  sh: mach-ecovec24: modify address map
  ...
2009-12-09 19:03:16 -08:00
Linus Torvalds 1c496784a0 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (149 commits)
  arm: omap: Add omap3_defconfig
  AM35xx: Defconfig for AM3517 EVM board
  AM35xx: Add support for AM3517 EVM board
  omap: 3630sdp: defconfig creation
  omap: 3630sdp: introduce 3630 sdp board support
  omap3: Add defconfig for IGEP v2 board
  omap3: Add minimal IGEP v2 support
  omap3: Add CompuLab CM-T35 defconfig
  omap3: Add CompuLab CM-T35 board support
  omap3: rx51: Add wl1251 wlan driver support
  omap3: rx51: Add SDRAM init
  omap1: Add default kernel configuration for Herald
  omap1: Add board support and LCD for HTC Herald
  omap: zoom2: update defconfig for LL_DEBUG_NONE
  omap: zoom3: defconfig creation
  omap3: zoom: Introduce zoom3 board support
  omap3: zoom: Drop i2c-1 speed to 2400
  omap3: zoom: rename zoom2 name to generic zoom
  omap3: zoom: split board file for software reuse
  omap3evm: MIgrate to smsc911x ethernet driver
  ...

Fix trivial conflict (two unrelated config options added next to each
other) in arch/arm/mach-omap2/Makefile
2009-12-08 08:15:29 -08:00
Linus Torvalds 79c9601c2e Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (272 commits)
  Fix soc_common PCMCIA configuration
  ARM: 5827/1: SA1100: h3100/h3600: emit messages on failed gpio_request
  ARM: 5826/1: SA1100: h3100/h3600: always build htc-egpio driver
  ARM: 5825/1: SA1100: h3600: update defconfig
  ARM: 5824/1: SA1100: reuse h3600 PCMCIA driver on h3100
  ARM: 5823/1: SA1100: h3100/h3600: add support for gpio-keys
  ARM: 5822/1: SA1100: h3100/h3600: clean up #includes
  ARM: 5821/1: SA1100: h3100/h3600: revise copyright boilerplates
  ARM: 5820/1: SA1100: h3100/h3600: split h3600.c
  ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.h
  ARM: 5818/1: SA1100: h3100/h3600: drop old GPIO definitions
  ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputs
  ARM: 5816/1: SA1100: h3600: remove IRQ_GPIO_* definitions
  ARM: 5815/1: SA1100: h3100/h3600: remove now unused assign_h3600_egpio handlers
  ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to gpiolib
  ARM: 5813/1: SA1100: h3100/h3600: add htc-egpio driver
  ARM: 5812/1: SA1100: h3100/h3600: separate machine-specific LCD helpers
  ARM: 5811/2: pcmcia: convert sa1100_h3600 driver to gpiolib
  ARM: 5799/1: SA1100: h3600: stop setting direction for LCD pins
  ARM: 5798/1: SA1100: h3600: remove unused cruft from h3600.h
  ...
2009-12-08 08:12:43 -08:00
Linus Torvalds a421018e8c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (294 commits)
  S3C64XX: Staticise platform data for PCM devices
  ASoC: Rename controls with a / in wm_hubs
  snd-fm801: autodetect SF64-PCR (tuner-only) card
  ALSA: tea575x-tuner: fix mute
  ASoC: au1x: dbdma2: plug memleak in pcm device creation error path
  ASoC: au1x: dbdma2: fix oops on soc device removal.
  ALSA: hda - Fix memory leaks in the previous patch
  ALSA: hda - Add ALC661/259, ALC892/888VD support
  ALSA: opti9xx: remove snd_opti9xx fields
  ALSA: aaci - Clean up duplicate code
  ALSA: usb - Fix mixer map for Hercules Gamesurround Muse Pocket LT
  ALSA: hda - Add position_fix quirk for HP dv3
  ALSA: hda - Add a pin-fix for FSC Amilo Pi1505
  ALSA: hda - Fix Cxt5047 test mode
  ASoC: pxa/raumfeld: adopt new snd_soc_dai_set_pll() API
  ASoC: sh: fsi: Add runtime PM support
  sh: ms7724se: Add runtime PM support for FSI
  ALSA: hda - Add a position_fix quirk for MSI Wind U115
  ALSA: opti-miro: add PnP detection
  ALSA: opti-miro: separate comon probing code
  ...
2009-12-08 07:47:46 -08:00
Russell King ba71e17269 Merge branch 'for-lak' of git://git.linuxtogo.org/home/thesing/collie into sa1100 2009-12-06 16:53:12 +00:00
Dmitry Torokhov 467832032c Merge commit 'v2.6.32' into next 2009-12-02 23:38:13 -08:00
Mark Brown 7716977b6a mfd: Correct WM831X_MAX_ISEL_VALUE
There was confusion between the array size and the highest ISEL
value possible.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-01 11:24:19 +01:00
Magnus Damm be9cd7b6f8 mfd: Add power control platform data to SDHI driver
This patch adds platform data with a function for power
control to the SDHI driver. The idea is that board specific
code can provide their own functions so power can be enabled
and disabled for the sd-cards.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30 12:01:24 +09:00
Thomas Kunze 9ca3dc805c add gpiolib support to ucb1x00
The old access methods to the gpios will be removed when
all users has been converted. (mainly ucb1x00-ts)
2009-11-27 21:07:21 +01:00
Thomas Kunze c8602edf3f move drivers/mfd/*.h to include/linux/mfd
So drivers like collie_battery driver can use
those files easier.
2009-11-27 21:07:18 +01:00
Mark Brown 2449ae85e3 Merge branch 'twl4030-mfd' into for-2.6.33 2009-11-25 14:25:36 +00:00
Daniel J Blueman b5e102cdcf mfd: twl4030: fix ELF section mismatch...
Since twl4030_probe is only called from functions in the init ELF
section, annotate it so.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 14:23:19 +00:00
Peter Ujfalusi cfaf6d2c1c MFD: twl4030-codec: APLL_INFREQ handling in the MFD driver
Configure the APLL_INFREQ field in the APLL_CTL register
based on the platform data.
Provide also a function for childs to query the audio_mclk
frequency.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-22 10:09:24 -08:00
Peter Ujfalusi 3066eec68d MFD: twl4030: add twl4030_codec MFD as a new child to the core
New MFD child to twl4030 MFD device.

Reason for the twl4030_codec MFD: the vibra control is actually in the codec
part of the twl4030. If both the vibra and the audio functionality is needed
from the twl4030 at the same time, than they need to control the codec power
and APLL at the same time without breaking the other driver.
Also these two has to be able to work without the need for the other driver.

This MFD device will be used by the drivers, which needs resources
from the twl4030 codec like audio and vibra.

The platform specific configuration data is passed along to the
child drivers (audio, vibra).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-22 10:09:00 -08:00
Marek Vasut fb14159755 Input: ucb1400_ts - allow passing IRQ through platfrom_data
This patch allows UCB1400 to get IRQ GPIO from platform data. In case
platform_data are not supplied or the IRQ supplied in the platform_data
is negative, fall back to the old IRQ detection algorithm.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-20 00:52:05 -08:00
Mark Brown c26964ead5 wm831x: Factor out WM831x backup battery charger
The backup battery on WM831x is a separate IP block to the main PMU
and is largely unrelated to the main supply functionality. Factor it
out into a separate driver in order to reflect this and better support
future hardware versions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16 03:27:30 +03:00
Tony Lindgren 774facda20 Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
Mark Brown 0969afcc44 Merge branch 'twl4030-mfd' into for-2.6.33 2009-11-10 12:08:12 +00:00
Peter Ujfalusi f9b4639e04 MFD: twl4030-codec: APLL_INFREQ handling in the MFD driver
Configure the APLL_INFREQ field in the APLL_CTL register
based on the platform data.
Provide also a function for childs to query the audio_mclk
frequency.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-10 12:07:23 +00:00
Mark Brown 330f28f691 Merge branch 'for-2.6.32' into for-2.6.33 2009-11-06 15:46:18 +00:00
Paul Mundt b6d0137d61 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-11-04 16:10:35 +09:00
Ilkka Koskinen a8643430bc mfd: Do not dereference null pointer in twl4030 error path
We are mistakenly dereferencing twl->client in the twl->client null checking
path.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-10-27 00:20:33 +01:00
Mark Brown 14f572fa38 mfd: Always initialise WM831x IRQ mutex
This avoids crashes when running without interrupt support.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-10-27 00:20:32 +01:00
Paul Mundt 15893fb565 Merge branch 'sh/sdhi-mfd'
Conflicts:
	arch/sh/boards/mach-ecovec24/setup.c
	arch/sh/boards/mach-kfr2r09/setup.c
2009-10-26 10:47:44 +09:00
Magnus Damm a87d563873 mfd: Add SuperH Mobile SDHI platform driver
This patch adds an MFD driver for the SuperH Mobile SDHI
hardware block. At this point the driver simply wraps the
tmio-mmc driver with some clock code. In the future this
driver is the place to put SDHI specific hotplug code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:04 +09:00
Peter Ujfalusi 0b83ddebc6 MFD: twl4030: add twl4030_codec MFD as a new child to the core
New MFD child to twl4030 MFD device.

Reason for the twl4030_codec MFD: the vibra control is actually in the codec
part of the twl4030. If both the vibra and the audio functionality is needed
from the twl4030 at the same time, than they need to control the codec power
and APLL at the same time without breaking the other driver.
Also these two has to be able to work without the need for the other driver.

This MFD device will be used by the drivers, which needs resources
from the twl4030 codec like audio and vibra.

The platform specific configuration data is passed along to the
child drivers (audio, vibra).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-25 17:15:08 +00:00
Tony Lindgren ce491cf854 omap: headers: Move remaining headers from include/mach to include/plat
Move the remaining headers under plat-omap/include/mach
to plat-omap/include/plat. Also search and replace the
files using these headers to include using the right path.

This was done with:

#!/bin/bash
mach_dir_old="arch/arm/plat-omap/include/mach"
plat_dir_new="arch/arm/plat-omap/include/plat"
headers=$(cd $mach_dir_old && ls *.h)
omap_dirs="arch/arm/*omap*/ \
drivers/video/omap \
sound/soc/omap"
other_files="drivers/leds/leds-ams-delta.c \
drivers/mfd/menelaus.c \
drivers/mfd/twl4030-core.c \
drivers/mtd/nand/ams-delta.c"

for header in $headers; do
	old="#include <mach\/$header"
	new="#include <plat\/$header"
	for dir in $omap_dirs; do
		find $dir -type f -name \*.[chS] | \
			xargs sed -i "s/$old/$new/"
	done
	find drivers/ -type f -name \*omap*.[chS] | \
		xargs sed -i "s/$old/$new/"
	for file in $other_files; do
		sed -i "s/$old/$new/" $file
	done
done

for header in $(ls $mach_dir_old/*.h); do
	git mv $header $plat_dir_new/
done

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20 09:40:47 -07:00
Roger Quadros f8ebdff087 mfd: Fix twl4030 boot with twl4030 usb transceiver enabled
The usb regulator supplies (usb1v5, usb1v8 & usb3v1) must be available
before adding the twl4030_usb child, else twl4030_usb_ldo_init() will
always fail thus causing boot lock-up.

This patch fixes boot on OMAP systems using the twl4030 usb transceiver.
CONFIG_TWL4030_USB=y

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-10-12 15:19:23 +02:00
Alexey Dobriyan d43c36dc6b headers: remove sched.h from interrupt.h
After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-11 11:20:58 -07:00
Alexey Dobriyan a99bbaf5ee headers: remove sched.h from poll.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-04 15:05:10 -07:00
Jean Delvare dcffa12551 mfd: AB3100 drop unused module parameters
The I2C_CLIENT_INSMOD_1 macro is only useful for i2c drivers which
implement device detection. The ab3100 driver doesn't, so there is no
point in calling it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
2009-10-04 22:53:44 +02:00
Marek Vasut 4cf8e53b3b mfd/gpio: add a GPIO interface to the UCB1400 MFD chip driver via gpiolib
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Cc: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:48 -07:00
Anton Vorontsov e0626e3844 spi: prefix modalias with "spi:"
This makes it consistent with other buses (platform, i2c, vio, ...).  I'm
not sure why we use the prefixes, but there must be a reason.

This was easy enough to do it, and I did it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Samuel Ortiz <sameo@openedhand.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Acked-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:43 -07:00
Andrew Morton 00d3803b65 drivers/mfd/ab3100-core.c: fix powerpc build error
drivers/mfd/ab3100-core.c:647: error: ab3100_init_settings causes a section type conflict

Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:24 -07:00
Mark Brown 37bce07077 mfd: Convert WM8350 to use request_threaded_irq()
Instead of hand rolling our own variant.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 15:48:18 +02:00
Samuel Ortiz c82693317e mfd: Fix twl4030-power warnings
KEY_1 and KEY_2 definitions conflicts with include/linux/input.h

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:27 +02:00
Linus Walleij d619bc143e regulator: AB3100 support
This adds support for the regulators found in the AB3100
Mixed-Signal IC.

It further also defines platform data for the ST-Ericsson
U300 platform and extends the AB3100 MFD driver so that
platform/board data with regulation constraints and an init
function can be passed down all the way from the board to
the regulators.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:25 +02:00
Samuel Ortiz 8aba721b23 mfd: Fix ab3100-otp build failure
ab3100.h should include linux/workqueue.h for otp to build properly.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:23 +02:00
Amit Kucheria 75a7456539 mfd: Print warning for twl4030 out-of-order script loading
When the sleep script is loaded before the wakeup script, there is a
chance that the system might go to sleep before the wakeup script
loading is completed. This will lead to a system that does not wakeup
and has been observed to cause non-booting boards.

Various options were considered to solve this problem, including
modification of the core twl4030 power code to be smart enough to
reorder the loading of the scripts. But it felt too over-engineered.

Hence this patch just warns the DPS script developer so that they may be
reordered in the board-code itself.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:22 +02:00
Amit Kucheria ebf0bd366e mfd: Add support for TWL4030/5030 dynamic power switching
The TWL4030/5030 family of multifunction devices allows board-specific
control of the the various regulators, clock and reset lines through
'scripts' that are loaded into its memory. This allows for Dynamic Power
Switching (DPS).

Implement board-independent core support for DPS that is then used by
board-specific code to load custom DPS scripts.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:22 +02:00
Linus Walleij 12992dd89c mfd: AB3100 OTP readout
This adds the ability to read out OTP (One-Time Programmable)
registers in the AB3100 MFD ASIC. It's a simple sysfs file you
can cat to prompt. The OTP registers of the AB3100 are used to
store various device-unique information such as customer ID,
product flags and the 3GPP standard IMEI (International Mobile
Equipment Indentity) number.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:21 +02:00
Sascha Hauer 8238addcc5 mfd: Add Freescale MC13783 driver
This driver provides the core Freescale MC13783 support. It
registers the client platform_devices and provides access
to the A/D converter.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:19 +02:00
Linus Walleij 0ad651c94c mfd: AB3100 disable irq nosync
This will make the worker fire interrupt disable the AB3100 IRQ
without sync which resolves a race since the interrupt obviously
cannot wait for itself to complete while being handled.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:18 +02:00
Linus Walleij ce290b0e86 mfd: AB3100 alter default setting
This alters the default setting for AB3100_IMRB1 from 0xff to
0xbf. These registers are used for the yet unimplemented ADC
and this new setting will deactivate ADC Trigger 1.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:17 +02:00
Linus Walleij 7cdc2b98ce mfd: AB3100 propagate error
This makes ab3100_set_register_interruptible() propagate the error
code from suboperations properly so it can be handles properly.
(A special case comes from signal interruption.)

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:17 +02:00
Linus Walleij 956f25a677 mfd: AB3100 accessor function cleanups
This adds the _interruptible suffix to the AB3100 accessor
functions on par with mutex_lock_interruptible() that's used
for blocking simultaneous calls to the AB3100 acessor functions.
Since these accesses are slow on a 100kHz I2C bus and may line
up waiting for the mutex, we need to handle interruption by
system shutdown or kill signals and may just as well denote that
in the function names.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:15 +02:00
Mark Brown b11062b9c5 mfd: Hook WM831x into build system
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:00 +02:00
Mark Brown 698659d5f7 mfd: Export ISEL values from WM831x core
The current settings which can be used with the WM831x current sinks
can't easily be mapped between register values and currents at run
time without a lookup table since the values scale logarithmically
to match the way the human eye interprets brightness. This lookup
table is inclided in the core since several drivers need to use it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:00 +02:00