Commit Graph

189 Commits

Author SHA1 Message Date
Linus Torvalds 5f2434a66d Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits)
  powerpc: Fix CHRP PCI config access for indirect_pci
  powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs
  powerpc: Fix 32-bit SMP boot on CHRP
  powerpc: Fix link errors on 32-bit machines using legacy DMA
  powerpc/pci: Improve detection of unassigned bridge resources
  hvc_console: Fix free_irq in spinlocked section
  powerpc: Get USE_STRICT_MM_TYPECHECKS working again
  powerpc: Reflect the used arguments in machine_init() prototype
  powerpc: Fix DMA offset for non-coherent DMA
  powerpc: fix fsl_upm nand driver modular build
  powerpc/83xx: add NAND support for the MPC8360E-RDK boards
  powerpc: FPGA support for GE Fanuc SBC610
  i2c: MPC8349E-mITX Power Management and GPIO expander driver
  powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree
  powerpc: document the "fsl,ssi-dma-channel" compatible property
  powerpc: disable CHRP and PMAC support in various defconfigs
  OF: add fsl,mcu-mpc8349emitx to the exception list
  powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards
  powerpc: remove support for bootmem-allocated memory for the DIU driver
  powerpc: remove non-dependent load fsl_booke PTE_64BIT
  ...
2008-10-15 08:07:35 -07:00
Marek Vasut b84ee0b0c7 i2c/tps65010: Vibrator hookup to gpiolib
All the tps6501{0,1,2,3,4} chips have a signal for hooking up with
a vibrator (for non-auditory cell phone "ring") ... expose that as
one more (output-only) GPIO.

[ dbrownell@users.sourceforge.net: comments; list tps65014 too ]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-14 17:30:04 +02:00
Jean Delvare 9df013b3e4 i2c/isp1301_omap: Convert to a new-style i2c driver, part 2
Based on David Brownell's patch for tps65010 and previous work by
Felipe Balbi, this patch finishes converting isp1301_omap to a
new-style i2c driver.

There's definitely room for further drivers cleanups, but these are
out of the scope of this patch.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Tony Lindgren <tony@atomide.com>
2008-10-14 17:30:02 +02:00
Felipe Balbi a5f08a327a i2c/isp1301_omap: Convert to a new-style i2c driver, part 1
Based on David Brownell's patch for tps65010, this patch
starts converting isp1301_omap.c to new-style i2c driver.

Signed-off-by: Felipe Balbi <me@felipebalbi.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Tony Lindgren <tony@atomide.com>
2008-10-14 17:30:02 +02:00
Anton Vorontsov d6c3db83c5 i2c: MPC8349E-mITX Power Management and GPIO expander driver
On MPC8349E-mITX, MPC8315E-RDB and MPC837x-RDB boards there is a
Freescale MC9S08QG8 (MCU) chip with the custom firmware
pre-programmed. The chip is used to power-off the board by the
software, and to control some GPIO pins.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:10:00 -05:00
Dmitry Baryshkov cbbcb9b0c7 USB: isp1301: fix compilation
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13 17:32:56 -07:00
David Brownell 2ce5b34fd5 i2c: correct some size_t printk formats
Fix various printk format strings where %zd was passed a size_t;
those should be %zu instead.  (Courtesy of a version of GCC which
warns when these details are wrong.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-10 22:56:16 +02:00
Russell King a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King 0f8469a54f [ARM] Eliminate useless includes of asm/mach-types.h
There are 43 includes of asm/mach-types.h by files that don't
reference anything from that file.  Remove these unnecessary
includes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:04 +01:00
Michael Buesch 7444a72eff gpiolib: allow user-selection
This patch adds functionality to the gpio-lib subsystem to make it
possible to enable the gpio-lib code even if the architecture code didn't
request to get it built in.

The archtitecture code does still need to implement the gpiolib accessor
functions in its asm/gpio.h file.  This patch adds the implementations for
x86 and PPC.

With these changes it is possible to run generic GPIO expansion cards on
every architecture that implements the trivial wrapper functions.  Support
for more architectures can easily be added.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Samuel Ortiz <sameo@openedhand.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:30 -07:00
David Brownell d8f388d8dc gpio: sysfs interface
This adds a simple sysfs interface for GPIOs.

    /sys/class/gpio
    	/export ... asks the kernel to export a GPIO to userspace
    	/unexport ... to return a GPIO to the kernel
        /gpioN ... for each exported GPIO #N
	    /value ... always readable, writes fail for input GPIOs
	    /direction ... r/w as: in, out (default low); write high, low
	/gpiochipN ... for each gpiochip; #N is its first GPIO
	    /base ... (r/o) same as N
	    /label ... (r/o) descriptive, not necessarily unique
	    /ngpio ... (r/o) number of GPIOs; numbered N .. N+(ngpio - 1)

GPIOs claimed by kernel code may be exported by its owner using a new
gpio_export() call, which should be most useful for driver debugging.
Such exports may optionally be done without a "direction" attribute.

Userspace may ask to take over a GPIO by writing to a sysfs control file,
helping to cope with incomplete board support or other "one-off"
requirements that don't merit full kernel support:

  echo 23 > /sys/class/gpio/export
	... will gpio_request(23, "sysfs") and gpio_export(23);
	use /sys/class/gpio/gpio-23/direction to (re)configure it,
	when that GPIO can be used as both input and output.
  echo 23 > /sys/class/gpio/unexport
	... will gpio_free(23), when it was exported as above

The extra D-space footprint is a few hundred bytes, except for the sysfs
resources associated with each exported GPIO.  The additional I-space
footprint is about two thirds of the current size of gpiolib (!).  Since
no /dev node creation is involved, no "udev" support is needed.

Related changes:

  * This adds a device pointer to "struct gpio_chip".  When GPIO
    providers initialize that, sysfs gpio class devices become children of
    that device instead of being "virtual" devices.

  * The (few) gpio_chip providers which have such a device node have
    been updated.

  * Some gpio_chip drivers also needed to update their module "owner"
    field ...  for which missing kerneldoc was added.

  * Some gpio_chips don't support input GPIOs.  Those GPIOs are now
    flagged appropriately when the chip is registered.

Based on previous patches, and discussion both on and off LKML.

A Documentation/ABI/testing/sysfs-gpio update is ready to submit once this
merges to mainline.

[akpm@linux-foundation.org: a few maintenance build fixes]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:30 -07:00
Jean Delvare bd8d421f7c i2c: Convert the max6875 driver to a new-style i2c driver
The new-style max6875 driver implements the optional detect() callback
to cover the use cases of the legacy driver. I'm curious if anyone
really needs this though, so it might be removed in the feature.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:07 +02:00
Jean Delvare 3d63430a26 i2c: Convert the pca9539 driver to a new-style i2c driver
The new-style pca9539 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Warning: users will now have to use the force module parameter to get
the driver to attach to their device. That's not a bad thing as these
devices can't be detected anyway.

Note that this doesn't change the fact that this driver is deprecated
in favor of gpio/pca953x.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:07 +02:00
Jean Delvare 97addff6de i2c: Convert the pcf8575 driver to a new-style i2c driver
The new-style pcf8575 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Warning: users will now have to use the force module parameter to get
the driver to attach to their device. That's not a bad thing as these
devices can't be detected anyway.

Note that this doesn't change the fact that this driver is deprecated
in favor of gpio/pcf857x.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:06 +02:00
Jean Delvare 833bedb813 i2c: Convert the pcf8574 driver to a new-style i2c driver
The new-style pcf8574 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Warning: users will now have to use the force module parameter to get
the driver to attach to their device. That's not a bad thing as these
devices can't be detected anyway.

Note that this doesn't change the fact that this driver is deprecated
in favor of gpio/pcf857x.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:06 +02:00
Jean Delvare 8b77e6ac49 i2c: Convert the pcf8591 driver to a new-style i2c driver
The new-style pcf8591 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:06 +02:00
Jean Delvare 68be336374 i2c: Convert the eeprom driver to a new-style i2c driver
The new-style eeprom driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:05 +02:00
Linus Torvalds dc221eae08 Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (56 commits)
  i2c: Add detection capability to new-style drivers
  i2c: Call client_unregister for new-style devices too
  i2c: Clean up old chip drivers
  i2c-ibm_iic: Register child nodes
  i2c: New-style EEPROM driver using device IDs
  i2c: Export the i2c_bus_type symbol
  i2c-au1550: Fix PM support
  i2c-dev: Delete empty detach_client callback
  i2c: Drop stray references to lm_sensors
  i2c: Check for ACPI resource conflicts
  i2c-ocores: basic PM support
  i2c-sibyte: SWARM I2C board initialization
  i2c-i801: Fix handling of error conditions
  i2c-i801: Rename local variable temp to status
  i2c-i801: Properly report bus arbitration loss
  i2c-i801: Remove verbose debugging messages
  i2c-algo-pcf: Drop unused struct members
  i2c-algo-pcf: Multi-master lost-arbitration improvement
  i2c: Deprecate the legacy gpio drivers
  i2c-pxa: Initialize early
  ...
2008-07-15 11:16:05 -07:00
Jean Delvare f741f67329 i2c: Clean up old chip drivers
Clean up old i2c chip drivers:
* Name the i2c_client "client" instead of "new_client".
* Drop useless initializations to 0.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:36 +02:00
Wolfram Sang 2b7a5056a0 i2c: New-style EEPROM driver using device IDs
Add a new-style driver for most I2C EEPROMs, giving sysfs read/write
access to their data. Tested with various chips and clock rates.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:35 +02:00
Jean Delvare 954a99307f i2c: Drop stray references to lm_sensors
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:34 +02:00
David Brownell 8a56ce1033 i2c: Deprecate the legacy gpio drivers
The legacy pcf8574 and pcf8575 drivers should be avoided
on systems using the new gpiolib code, and generally deprecated
in the same way the legacy pca9539 driver is deprecated.

Also, correct the pca9539 deprecation to match the current name
of the preferred driver:  pca953x, supporting several more chips.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:31 +02:00
Jean Delvare 1b4dff9cd3 i2c/eeprom: Fall back to SMBus read word transactions
When I2C block reads are not supported by the underlying adapter, use
SMBus read word transactions instead of consecutive byte reads.
Reasons for this change are:

* The consecutive byte read approach is not safe on multi-master buses.

* While consecutive byte reads have less overhead if you only count the
  bytes on the bus, it takes more than twice as many transactions as
  with SMBus read word transactions, and each transaction has a cost:
  taking and releasing the adapter mutex, and for polling drivers,
  waiting for the transaction to complete.

This change yields a significant performance boost at HZ=250 with
EEPROMs on an Intel 82801 bus (basically twice as fast.)

SMBus read word transactions are widely supported so I don't expect
compatibility issues.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:29 +02:00
Jean Delvare d4653bf946 i2c/eeprom: Only probe buses with DDC or SPD class
The eeprom driver shouldn't probe i2c buses which don't want to be
probed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:29 +02:00
Tony Lindgren f35ae63468 ARM: OMAP: USB: Change omap USB code to use omap_read/write instead of __REG
Change omap USB code to use omap_read/write instead of __REG for multi-omap

Cc: David Brownell <david-b@pacbell.net>
Cc: linux-usb@vger.kernel.org
Cc: i2c@lm-sensors.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:43 +03:00
Jean Delvare 70455e7903 i2c/max6875: Really prevent 24RF08 corruption
i2c-core takes care of the possible corruption of 24RF08 chips for
quite some times, so device devices no longer need to do it. And they
really should not, as applying the prevention twice voids it.

I thought that I had fixed all drivers long ago but apparently I had
missed that one.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ben Gardner <bgardner@wabtec.com>
2008-05-18 20:49:41 +02:00
Jean Delvare 3760f73671 i2c: Convert most new-style drivers to use module aliasing
Based on earlier work by Jon Smirl and Jochen Friedrich.

Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Jochen Friedrich <jochen@scram.de>
2008-04-29 23:11:40 +02:00
Jean Delvare d2653e9273 i2c: Add support for device alias names
Based on earlier work by Jon Smirl and Jochen Friedrich.

This patch allows new-style i2c chip drivers to have alias names using
the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this
point, the old i2c driver binding scheme (driver_name/type) is still
supported.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jochen Friedrich <jochen@scram.de>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2008-04-29 23:11:39 +02:00
Jean Delvare 6d072d78f8 i2c/tps65010: Add missing intialization of client data
tps65010_remove() calls i2c_get_clientdata(client) but the client data
is never set during initialization, so it gets a NULL pointer at best.

I guess it was never spotted because the tps65010 driver is typically
not built modular so this function is discarded.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2008-04-29 23:11:38 +02:00
Harvey Harrison 08882d2093 i2c: Replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:47 +02:00
David Brownell 79966fd9b4 ARM: OMAP: I2C: tps65010 driver converts to gpiolib
Make the tps65010 driver use gpiolib to expose its GPIOs.

Note: This patch will get merged via omap tree instead of I2C
as it will cause some board updates. This has been discussed
at on the I2C list:

http://lists.lm-sensors.org/pipermail/i2c/2008-March/003031.html

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: i2c@lm-sensors.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 09:57:06 -07:00
Jean Delvare 3d706d952c i2c: chips subdirectory is deprecated
Let driver authors know that drivers/i2c/chips is usually the wrong place
for new drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-03-12 14:15:00 +01:00
Jean Delvare 7b501b1f53 hwmon: Discard useless I2C driver IDs
Many I2C hwmon drivers define a driver ID but no other code references
these, meaning that they are useless. Discard them, along with a few
IDs which are defined but never used at all.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
eric miao b72540c30c deprecate obsolete pca9539 driver
Use drivers/gpio/pca9539.c instead.

Signed-off-by: eric miao <eric.miao@marvell.com>
Acked-by: Ben Gardner <bgardner@wabtec.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:13 -08:00
David Brownell 6d16bfb5e8 i2c/tps65010: move header to <linux/i2c/...>
Move the tps65010 header file from the OMAP arch directory to the
more generic <linux/i2c/...> directory, and remove the spurious
dependency of this driver on OMAP.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27 18:14:49 +01:00
Jean Delvare 2cdddeb8d7 i2c: normal_i2c can be made const (remaining drivers)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27 18:14:47 +01:00
Adrian Bunk eee87d3196 i2c: the scheduled I2C RTC driver removal
This patch contains the scheduled removal of legacy I2C RTC drivers with 
replacement drivers.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27 18:14:45 +01:00
Rodolfo Giometti 1b3e5baa88 i2c/tsl2550: Add power management added
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27 18:14:45 +01:00
Bart Van Assche 5864ae03ca i2c: Add support for the PCF8575 chip
Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27 18:14:45 +01:00
Emil Medve 7b8712e563 driver core: Make the dev_*() family of macros in device.h complete
Removed duplicates defined elsewhere

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:08 -08:00
David Brownell 187426e69a i2c/isp1301_omap: Build fix
Build fix to the isp1301_omap driver ... this driver gets built
more often in the OMAP tree than in mainline, partly because the
defconfig for H2 (plus probably H3 and H4) needs updating.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-12-12 13:45:25 +01:00
Jean Delvare 8b925a3dd8 i2c/eeprom: Recognize VGN as a valid Sony Vaio name prefix
Recent (i.e. 2005 and later) Sony Vaio laptops have names beginning
with VGN rather than PCG. Update the eeprom driver so that it
recognizes these.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-11-15 19:24:03 +01:00
Jean Delvare 0f2cbd38aa i2c/eeprom: Hide Sony Vaio serial numbers
The sysfs interface to DMI data takes care to not make the system
serial number and UUID world-readable, presumably due to privacy
concerns. For consistency, we should not let the eeprom driver
export these same strings to the world on Sony Vaio laptops.
Instead, only make them readable by root, as we already do for BIOS
passwords.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-11-15 19:24:03 +01:00
Joe Perches 898eb71cb1 Add missing newlines to some uses of dev_<level> messages
Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:28 -07:00
Emil Medve 1f7c8234c7 Make the pr_*() family of macros in kernel.h complete
Other/Some pr_*() macros are already defined in kernel.h, but pr_err() was
defined multiple times in several other places

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Satyam Sharma <satyam@infradead.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:57 -07:00
Jean Delvare 553515e5c5 i2c/pcf8574: No arbitrary initialization
Do not initialize the PCF8574 with an arbitrary value. Users will have
to write the initial value to sysfs themselves.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
2007-10-13 23:56:31 +02:00
David Brownell 8056c6cb2b i2c/tps65010: New-style driver updates, part 2
Switch the tps65010 driver into a "new-style" I2C driver, and convert all
of its in-tree users (board support for OSK, H2, H3) accordingly.

That accounts for most of the board-specific code in this driver; the
rest of that code is now moved into board-specific initcalls.

Also remove some of the many now-superfluous #includes.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13 23:56:30 +02:00
David Brownell b5067f8ff3 i2c/tps65010: New-style driver updates, part 1
Prepare to convert tps65010 driver to "new style" driver by changing
how it references the i2c_client.  This lets the eventual patch with
driver and platform updates be smaller.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13 23:56:30 +02:00
David Brownell c1147cc6d1 i2c/menelaus: Build fix
Fix Menelaus build error, and remove needless "#define DEBUG".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14 18:37:14 +02:00
David Brownell 25da383d26 i2c/isp1301_omap: Build fixes, whitespace
Build fixes for isp1301_omap driver.  I think an earlier version
of this must have gotten lost somewhere, or maybe it only went
into the Linux-OMAP tree.

Also, some whitespace fixes to bring this more into sync with the
version of this found in the Linux-OMAP tree.  (That version has
updates for the OTG controller on the OMAP 1710 which break that
functionality on OMAP 161x boards like the H2, so merging all of
it is not currently an option.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14 18:37:14 +02:00