Commit Graph

137 Commits

Author SHA1 Message Date
Bjorn Helgaas a0d84a92df ACPI: update debug parameter documentation
Reformat acpi.debug_layer and acpi.debug_level documentation so it's
more readable, add some clues about how to figure out the mask bits that
enable a specific ACPI_DEBUG_PRINT statement, and include some useful
examples.

Move the list of masks to Documentation/acpi/debug.txt (these are
copies of the authoritative values in acoutput.h and acpi_drivers.h).

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07 21:45:29 -05:00
Bjorn Helgaas 8950d89aca ACPI: remove CONFIG_ACPI_EC
Remove CONFIG_ACPI_EC.  It was always set the same as CONFIG_ACPI,
and it had no menu label, so there was no way to set it to anything
other than "y".

Per section 6.5.4 of the ACPI 3.0b specification,

    OSPM must make Embedded Controller operation regions, accessed
    via the Embedded Controllers described in ECDT, available before
    executing any control method.

The ECDT table is optional, but if it is present, the above text
means that the EC it describes is a required part of the ACPI
subsystem, so CONFIG_ACPI_EC=n wouldn't make sense.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06 15:52:28 -05:00
Bjorn Helgaas fefe5ab3d6 ACPI: remove CONFIG_ACPI_POWER
Remove CONFIG_ACPI_POWER.  It was always set the same as CONFIG_ACPI,
and it had no menu label, so there was no way to set it to anything
other than "y".

The interfaces under CONFIG_ACPI_POWER (acpi_device_sleep_wake(),
acpi_power_transition(), etc) are called unconditionally from the
ACPI core, so we already depend on it always being present.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06 15:42:38 -05:00
Shaohua Li 898b054f3e dock: make dock driver not a module
To avoid dock driver is loaded after other drivers like libata, let's
make dock driver not a module.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-23 04:00:47 -04:00
Len Brown 057316cc6a Merge branch 'linus' into test
Conflicts:
	MAINTAINERS
	arch/x86/kernel/acpi/boot.c
	arch/x86/kernel/acpi/sleep.c
	drivers/acpi/Kconfig
	drivers/pnp/Makefile
	drivers/pnp/quirks.c

Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-23 00:11:07 -04:00
Len Brown 5f50ef453d Merge branch 'misc' into test 2008-10-22 23:28:38 -04:00
Rafael J. Wysocki 5d1e072b6b ACPI suspend: Fix CONFIG_ACPI_SLEEP dependence and some compilation warnings
Initially CONFIG_PM_SLEEP was defined as
CONFIG_SUSPEND || CONFIG_HIBERNATION and some ACPI code, most
importantly the code in drivers/acpi/main.c, was written with this
assumption.  Currently, however, CONFIG_PM_SLEEP is also set when
CONFIG_XEN_SAVE_RESTORE is set.

This causes some compilation warnings to appear in
drivers/acpi/main.c if both CONFIG_SUSPEND and CONFIG_HIBERNATION
are unset and CONFIG_PM_SLEEP is set (this was impossible before).
To fix this problem, redefine CONFIG_ACPI_SLEEP do depend directly
on CONFIG_SUSPEND || CONFIG_HIBERNATION, as originally intended, and
use it instead of CONFIG_PM_SLEEP in drivers/acpi/main.c, wherever
appropriate.

Additionally, move the acpi_target_sleep_state definition from under
the #ifdef to prevent compilation from failing in some cases.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22 14:58:43 -04:00
David S. Miller 4bb03849ae acpi: Make ACPI_TOSHIBA depend on INPUT.
Selecting INPUT_POLLDEV is not sufficient.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-12 21:22:31 -07:00
Randy Dunlap b3cef8f6eb toshiba_acpi: depends on INPUT
CONFIG_ACPI_TOSHIBA can =y when CONFIG_INPUT=m, so prevent that
combination and its subsequent build errors:

toshiba_acpi.c:(.text+0x3e877): undefined reference to `input_event'
toshiba_acpi.c:(.text+0x3e98a): undefined reference to `input_unregister_polled_device'
toshiba_acpi.c:(.text+0x3e994): undefined reference to `input_free_polled_device'
toshiba_acpi.c:(.init.text+0x21b4): undefined reference to `input_allocate_polled_device'
toshiba_acpi.c:(.init.text+0x2263): undefined reference to `input_register_polled_device'
make[1]: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-10 18:05:54 -04:00
Shaohua Li 4be9309d15 bay: remove driver, all functions now handled by dock driver
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-09-23 23:48:32 -04:00
philipl@overt.org c41a40c58b toshiba_acpi: Add support for bluetooth toggling through rfkill (v8)
There's been a patch floating around for toshiba_acpi that exports an ad-hoc
/proc interface to toggle the bluetooth adapter in a large number of Toshiba
laptops. I'm not sure if it's still relevant for the latest models, but it is
still required for older models such as my Tecra M3.

This change pulls in the low level Toshiba-specific code from the old patch and
sets up an rfkill device and a polled input device to track the state of the
hardware kill-switch.

Signed-off-by: Philip Langdale <philipl@overt.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05 16:17:45 -04:00
Linus Torvalds dc7c65db28 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits)
  Revert "x86/PCI: ACPI based PCI gap calculation"
  PCI: remove unnecessary volatile in PCIe hotplug struct controller
  x86/PCI: ACPI based PCI gap calculation
  PCI: include linux/pm_wakeup.h for device_set_wakeup_capable
  PCI PM: Fix pci_prepare_to_sleep
  x86/PCI: Fix PCI config space for domains > 0
  Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n
  PCI: Simplify PCI device PM code
  PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep
  PCI ACPI: Rework PCI handling of wake-up
  ACPI: Introduce new device wakeup flag 'prepared'
  ACPI: Introduce acpi_device_sleep_wake function
  PCI: rework pci_set_power_state function to call platform first
  PCI: Introduce platform_pci_power_manageable function
  ACPI: Introduce acpi_bus_power_manageable function
  PCI: make pci_name use dev_name
  PCI: handle pci_name() being const
  PCI: add stub for pci_set_consistent_dma_mask()
  PCI: remove unused arch pcibios_update_resource() functions
  PCI: fix pci_setup_device()'s sprinting into a const buffer
  ...

Fixed up conflicts in various files (arch/x86/kernel/setup_64.c,
arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c,
drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86
and ACPI updates manually.
2008-07-16 17:25:46 -07:00
Ingo Molnar 15e551d25e x86, VisWS: turn into generic arch, eliminate Kconfig specials
remove leftover traces of various VISWS related Kconfig specials.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10 18:55:47 +02:00
Alex Chiang 8344b568f5 PCI: ACPI PCI slot detection driver
Detect all physical PCI slots as described by ACPI, and create entries in
/sys/bus/pci/slots/.

Not all physical slots are hotpluggable, and the acpiphp module does not
detect them.  Now we know the physical PCI geography of our system, without
caring about hotplug.

[kaneshige.kenji@jp.fujitsu.com: export-kobject_rename-for-pci_hotplug_core]
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Greg KH <greg@kroah.com>
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix build with CONFIG_DMI=n]
Signed-off-by: Alex Chiang <achiang@hp.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Len Brown <len.brown@intel.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10 14:37:14 -07:00
Yinghai Lu d49c428840 x86: make generic arch support NUMAQ
... so it could fall back to normal numa and we'd reduce the impact of the
NUMAQ subarch.

NUMAQ depends on GENERICARCH
also decouple genericarch numa from acpi.
also make it fall back to bigsmp if apicid > 8.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 11:34:42 +02:00
Zhang Rui 63c4ec905d thermal: add the support for building the generic thermal as a module
Build the generic thermal driver as module "thermal_sys".

Make ACPI thermal, video, processor and fan SELECT the generic
thermal driver, as these drivers rely on it to build the sysfs I/F.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 02:44:00 -04:00
Linus Torvalds 9a9e0d6855 ACPI: Remove ACPI_CUSTOM_DSDT_INITRD option
This essentially reverts commit 71fc47a9ad
("ACPI: basic initramfs DSDT override support"), because the code simply
isn't ready.

It did ugly things to the init sequence to populate the rootfs image
early, but that just ended up showing other problems with the whole
approach.  The fact is, the VFS layer simply isn't initialized this
early, and the relevant ACPI code should either run much later, or this
shouldn't be done at all.

For 2.6.25, we'll just pick the latter option.  We can revisit this
concept later if necessary.

Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Len Brown <len.brown@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Markus Gaugusch <dsdt@gaugusch.at>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-15 11:58:04 -07:00
Randy Dunlap 7ce9573e09 ACPI: prevent randconfig build failure on empty ACPI_CUSTOM_DSDT_FILE
Make ACPI_CUSTOM_DSDT boolean config symbol a hidden and derived
value, based on the value of ACPI_CUSTOM_DSDT_FILE (string).
Only the latter is presented to the user as a config option.

This fixes problems with "make randconfig" setting ACPI_CUSTOM_DSDT
but leaving ACPI_CUSTOM_DSDT_FILE empty/blank.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-23 00:15:11 -05:00
Carlos Corbacho 20b4514799 ACPI: WMI: Improve Kconfig description
As Pavel Machek has pointed out, the Kconfig entry for WMI is pretty
non-descriptive.

Rewrite it so that it explains what ACPI-WMI is, and why anyone
would want to enable it.

Many thanks to Ray Lee for ideas on this.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
CC: Pavel Machek <pavel@ucw.cz>
CC: Ray Lee <ray-lk@madrabbit.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-08 00:36:49 -05:00
Len Brown 9c2f7de8c0 ACPI: build WMI on X86 only
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07 16:18:24 -05:00
Len Brown 81e242d0ef Merge branches 'release' and 'dsdt-override' into release 2008-02-07 04:01:53 -05:00
Len Brown d89e9d6b49 ACPI: update DSDT override documentation
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07 04:00:38 -05:00
Len Brown a733a5da97 Merge branches 'release' and 'fluff' into release
Conflicts:

	drivers/acpi/scan.c
	include/linux/acpi.h

Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07 03:38:22 -05:00
Alan Cox 9e52797131 ACPI: its a directory not a folder....
The kernel help consistently uses 'directory'

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07 03:34:35 -05:00
Len Brown 060195500e Merge branches 'release' and 'wmi-2.6.25' into release 2008-02-07 03:19:43 -05:00
Markus Gaugusch 71fc47a9ad ACPI: basic initramfs DSDT override support
The basics of DSDT from initramfs. In case this option is selected,
populate_rootfs() is called a bit earlier to have the initramfs content
available during ACPI initialization.

This is a very similar path to the one available at
http://gaugusch.at/kernel.shtml but with some update in the
documentation, default set to No and the change of populate_rootfs() the
"Jeff Mahony way" (which avoids reading the initramfs twice).

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-06 22:07:41 -05:00
Carlos Corbacho bff431e49f ACPI: WMI: Add ACPI-WMI mapping driver
The following is an implementation of the Windows Management
Instrumentation (WMI) ACPI interface mapper (PNP0C14).

What it does:

Parses the _WDG method and exports functions to process WMI method calls,
data block query/ set commands (both based on GUID) and does basic event
handling.

How: WMI presents an in kernel interface here (essentially, a minimal
wrapper around ACPI)

(const char *guid assume the 36 character ASCII representation of
a GUID - e.g. 67C3371D-95A3-4C37-BB61-DD47B491DAAB)

wmi_evaluate_method(const char *guid, u8 instance, u32 method_id,
const struct acpi_buffer *in, struct acpi_buffer *out)

wmi_query_block(const char *guid, u8 instance,
struct acpi_buffer *out)

wmi_set_block(const char *guid, u38 instance,
const struct acpi_buffer *in)

wmi_install_notify_handler(acpi_notify_handler handler);

wmi_remove_notify_handler(void);

wmi_get_event_data(u32 event, struct acpi_buffer *out)

wmi_has_guid(const char guid*)

wmi_has_guid() is a helper function to find if a GUID exists or not on the
system (a quick and easy way for WMI dependant drivers to see if the
the method/ block they want exists, since GUIDs are supposed to be unique).

Event handling - allow a WMI based driver to register a notifier handler
for each GUID with WMI. When a notification is sent to a GUID in WMI, the
handler registered with WMI is then called (it is left to the caller to
ask for the WMI event data associated with the GUID, if needed).

What it won't do:

Unicode - The MS article[1] calls for converting between ASCII and Unicode (or
vice versa) if a GUID is marked as "string". This is left up to the calling
driver.

Handle a MOF[1] - the WMI mapper just exports methods, data and events to
userspace. MOF handling is down to userspace.

Userspace interface - this will be added later.

[1] http://www.microsoft.com/whdc/system/pnppwr/wmi/wmi-acpi.mspx

===
ChangeLog
==

v1 (2007-10-02):

* Initial release

v2 (2007-10-05):

* Cleaned up code - split up super "wmi_evaluate_block" -> each external
  symbol now handles its own ACPI calls, rather than handing off to
  a "super" method (and in turn, is a lot simpler to read)
* Added a find_guid() symbol - return true if a given GUID exists on
  the system
* wmi_* functions now return type acpi_status (since they are just
  fancy wrappers around acpi_evaluate_object())
* Removed extra debug code

v3 (2007-10-27)

* More code clean up - now passes checkpatch.pl
* Change data block calls - ref MS spec, method ID is not required for
  them, so drop it from the function parameters.
* Const'ify guid in the function call parameters.
* Fix _WDG buffer handling - copy the data to our own private structure.
* Change WMI from tristate to bool - otherwise the external functions are
  not exported in linux/acpi.h if you try to build WMI as a module.
* Fix more flag comparisons.
* Add a maintainers entry - since I wrote this, I should take the blame
  for it.

v4 (2007-10-30)

* Add missing brace from after fixing checkpatch errors.
* Rewrote event handling - allow external drivers to register with WMI to
  handle WMI events
* Clean up flags and sanitise flag handling

v5 (2007-11-03)

* Add sysfs interface for userspace. Export events over netlink again.
* Remove module left overs, fully convert to built-in driver.
* Tweak in-kernel API to use u8 for instance, since this is what the GUID
  blocks use (so instance cannot be greater than u8).
* Export wmi_get_event_data() for in kernel WMI drivers.

v6 (2007-11-07)

* Split out userspace into a different patch

v7 (2007-11-20)

* Fix driver to handle multiple PNP0C14 devices - store all GUIDs using
  the kernel's built in list functions, and just keep adding to the list
  every time we handle a PNP0C14 devices - GUIDs will always be unique,
  and WMI callers do not know or care about different devices.
* Change WMI event handler registration to use its' own event handling
  struct; we should not pass an acpi_handle down to any WMI based drivers
  - they should be able to function with only the calls provided in WMI.
* Update my e-mail address

v8 (2007-11-28)

* Convert back to a module.
* Update Kconfig to default to building as a module.
* Remove an erroneous printk.
* Simply comments for string flag (since we now leave the handling to the
  caller).

v9 (2007-12-07)

* Add back missing MODULE_DEVICE_TABLE for autoloading
* Checkpatch fixes

v10 (2007-12-12)

* Workaround broken GUIDs declared expensive without a WCxx method.
* Minor cleanups

v11 (2007-12-17)

* More fixing for broken GUIDs declared expensive without a WCxx method.
* Add basic EmbeddedControl region handling.

v12 (2007-12-18)

* Changed EC region handling code, as per Alexey's comments.

v13 (2007-12-27)

* Changed event handling so that we can have one event handler registered
  per GUID, as per Matthew Garrett's suggestion.

v14 (2008-01-12)

* Remove ACPI debug statements

v15 (2008-02-01)

* Replace two remaining 'x == NULL' type tests with '!x'

v16 (2008-02-05)

* Change MAINTAINERS entry, as I am not, and never have been, paid to work
  on WMI
* Remove 'default' line from Kconfig

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
CC: Matthew Garrett <mjg59@srcf.ucam.org>
CC: Alexey Starikovskiy <aystarik@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 15:06:40 -05:00
Zhang Rui 3f655ef8c4 ACPI: register ACPI thermal zone as generic thermal zone devices
Register ACPI thermal zone as thermal zone device.

the new sys I/F for ACPI thermal zone will be like this:

/sys/class/thermal:
|thermal_zone1:
	|-----type:			"ACPI thermal zone". RO
	|-----temp:			the current temperature. RO
	|-----mode:			the current working mode. RW.
					the default value is "kernel"  which means  thermal
					management is done by ACPI thermal driver.
					"echo user > mode" prevents all the ACPI thermal driver
					actions upon any trip points.
	|-----trip_point_0_temp:	the threshold of trip point 0. RO.
	|-----trip_point_0_type:	"critical". RO.
					the type of trip point 0
					This may be one of critical/hot/passive/active[x]
					for an ACPI thermal zone.
	...
	|-----trip_point_3_temp:
	|-----trip_point_3_type:	"active[1]"

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 23:12:19 -05:00
Alexey Starikovskiy 97749cd9ad ACPI: Make sysfs interface in ACPI power optional.
Reference: http://bugzilla.kernel.org/show_bug.cgi?id=9494

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-01 14:27:24 -05:00
Len Brown 65ea652037 Revert "acpi: make ACPI_PROCFS default to y"
This reverts commit cbff2fbf55.
2007-11-19 11:22:44 -05:00
Len Brown 3539a901d6 Revert "ACPI: add documentation for deprecated /proc/acpi/battery in ACPI_PROCFS"
This reverts commit 6e800af233.
2007-11-19 11:22:35 -05:00
Alexey Starikovskiy fdcedbba2f ACPI: Split out control for /proc/acpi entries from battery, ac, and sbs.
Introduce new ACPI_PROCFS_POWER (default Yes) config option and move
procfs code in battery, ac, and sbs drivers under it.
This is done to allow ACPI_PROCFS to be default No.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-19 11:21:50 -05:00
Andrew Morton cbff2fbf55 acpi: make ACPI_PROCFS default to y
Zillions of people are getting my-battery-monitor-doesnt-work problems
(including me).

Lessen the damage by making ACPI_PROCFS default to on.

Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Jerome Pinot 6e800af233 ACPI: add documentation for deprecated /proc/acpi/battery in ACPI_PROCFS
Add documentation in Kconfig help about the move of /proc/acpi/battery
to /sys/class/power_supply when selecting ACPI_PROCFS.  This will impact
a lot of users and should be documented.

Signed-off-by: Jerome Pinot <ngc891@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-10 14:28:16 -08:00
Len Brown 1942971b20 Pull documentation into release branch 2007-10-29 17:31:01 -04:00
Frans Pop 355ee5eb60 acpi: remove double mention of Support for ACPI option
Current description for CONFIG_ACPI includes the word "Support" twice.  One
effect of this is that in menuconfig the "--->" that indicates the presence
of sub-options will not show up unless you have a very wide console.

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-29 17:20:38 -04:00
Alexey Starikovskiy 5527c8bee2 ACPI: use select POWER_SUPPLY for AC, BATTERY and SBS
POWER_SUPPLY is needed for AC, battery, and SBS sysfs support.  Use
'select' instead of 'depends on', as it is will not be selected by anything
else, leading to confusion.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-29 17:08:59 -04:00
Rolf Eike Beer 405bbe9fa3 Typo: depricated -> deprecated
Typo: depricated -> deprecated

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 03:10:57 +02:00
Len Brown e270051d9c Pull battery-sbs-ac into release branch 2007-10-10 00:30:19 -04:00
Alexey Starikovskiy d5b4a3d0ef ACPI: AC: Add sysfs interface
Refer to Documentation/power_supply_class.txt for interface description.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-27 15:50:23 -04:00
Alexey Starikovskiy 94f6c08601 ACPI: SBS: Add support for power_supply class (and sysfs)
Add support for power_supply class and sysfs interface of it.
Refer to Documentation/power_supply_class.txt for interface description.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-27 15:50:22 -04:00
Alexey Starikovskiy d738096575 ACPI: Battery: Add sysfs support
Refer to Documentation/power_supply_class.txt for interface description.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-27 15:50:22 -04:00
Andreas Herrmann 03e2bf261e acpi_video: kernel build error if !INPUT
Commit e9dab1960a
(ACPI video hotkey: export missing ACPI video hotkey events via input layer)
exports ACPI video hotkey events via input layer. But this breaks kernel
build if ACPI_VIDEO && !INPUT:

 LD      .tmp_vmlinux1
drivers/built-in.o: In function `acpi_video_bus_remove':
drivers/acpi/video.c:2007: undefined reference to `input_unregister_device'
    ...

Signed-off-by: Andreas Herrmann <aherrman@arcor.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-18 12:55:21 -04:00
Hugh Dickins 721ebe005c reverse CONFIG_ACPI_PROC_EVENT default
Sigh.  Again an ACPI assault on the Thinkpad's Fn+F4 to suspend to RAM.
The default and text for CONFIG_THINKPAD_ACPI_INPUT_ENABLED were fixed
in -rc3, but now commit 14e04fb34f ("ACPI:
Schedule /proc/acpi/event for removal") introduces the ACPI_PROC_EVENT
config entry, and defaults it to 'n' to disable it again.

Change default to y, and add comment to make it clearer that n is for
future distros.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-27 10:27:48 -07:00
Len Brown 14e04fb34f ACPI: Schedule /proc/acpi/event for removal
Schedule /proc/acpi/event for removal in 6 months.

Re-name acpi_bus_generate_event() to acpi_bus_generate_proc_event()
to make sure there is no confusion that it is for /proc/acpi/event only.

Add CONFIG_ACPI_PROC_EVENT to allow removal of /proc/acpi/event.
There is no functional change if CONFIG_ACPI_PROC_EVENT=y

Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-23 15:20:26 -04:00
Len Brown 128a2bcf9d ACPI: delete CONFIG_ACPI_PROCFS_SLEEP (again)
CONFIG_ACPI_PROCFS_SLEEP is a NO-OP -- delete it (again).

Apparently 296699de6b creating CONFIG_SUSPEND
and CONFIG_PM_SLEEP was based on an out-dated version of drivers/acpi/Kconfig,
as it erroneously restored this recently deleted config option.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 20:40:08 -07:00
Len Brown 673d5b43da ACPI: restore CONFIG_ACPI_SLEEP
Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the
new CONFIG_PM_SLEEP option.

Signed-off-by: Len Brown <len.brown@intel.com>
[ Modified to work with the PM config setup changes. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 16:53:59 -07:00
Rafael J. Wysocki 296699de6b Introduce CONFIG_SUSPEND for suspend-to-Ram and standby
Introduce CONFIG_SUSPEND representing the ability to enter system sleep
states, such as the ACPI S3 state, and allow the user to choose SUSPEND
and HIBERNATION independently of each other.

Make HOTPLUG_CPU be selected automatically if SUSPEND or HIBERNATION has
been chosen and the kernel is intended for SMP systems.

Also, introduce CONFIG_PM_SLEEP which is automatically selected if
CONFIG_SUSPEND or CONFIG_HIBERNATION is set and use it to select the
code needed for both suspend and hibernation.

The top-level power management headers and the ACPI code related to
suspend and hibernation are modified to use the new definitions (the
changes in drivers/acpi/sleep/main.c are, mostly, moving code to reduce
the number of ifdefs).

There are many other files in which CONFIG_PM can be replaced with
CONFIG_PM_SLEEP or even with CONFIG_SUSPEND, but they can be updated in
the future.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 16:45:38 -07:00
Linus Torvalds 293a032eb9 Don't force-enable suspend/hibernate support just for ACPI
It's a totally independent decision for the user whether he wants
suspend and/or hibernation support, and ACPI shouldn't care.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 13:44:58 -07:00
Len Brown e8b2fd0122 ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source
As it was a synonym for (CONFIG_ACPI && CONFIG_X86),
the ifdefs for it were more clutter than they were worth.

For ia64, just add a few stubs in anticipation of future
S3 or S4 support.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-25 01:29:39 -04:00