Shuffle code around in ext4_orphan_add() and ext4_orphan_del() so that
we avoid taking global s_orphan_lock in some cases and hold it for
shorter time in other cases.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use sbi pointer consistently in ext4_orphan_del() instead of opencoding
it sometimes. Also ext4_orphan_add() uses EXT4_SB(sb) often so create
sbi variable for it as well and use it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
BH can not be NULL at this point, ext4_read_dirblock() always return
non null value, and we already have done all necessery checks.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cross rename (exchange source and dest) will need to call some of these
helpers for both source and dest, while overwriting rename currently only
calls them for one or the other. This also makes the code easier to
follow.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Move checking i_nlink from after ext4_get_first_dir_block() to before. The
check doesn't rely on the result of that function and the function only
fails on fs corruption, so the order shouldn't matter.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Need to split up ext4_rename() into helpers but there are too many local
variables involved, so create a new structure. This also, apparently,
makes the generated code size slightly smaller.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
If this flag is specified and the target of the rename exists then the
rename syscall fails with EEXIST.
The VFS does the existence checking, so it is trivial to enable for most
local filesystems. This patch only enables it in ext4.
For network filesystems the VFS check is not enough as there may be a race
between a remote create and the rename, so these filesystems need to handle
this flag in their ->rename() implementations to ensure atomicity.
Andy writes about why this is useful:
"The trivial answer: to eliminate the race condition from 'mv -i'.
Another answer: there's a common pattern to atomically create a file
with contents: open a temporary file, write to it, optionally fsync
it, close it, then link(2) it to the final name, then unlink the
temporary file.
The reason to use link(2) is because it won't silently clobber the destination.
This is annoying:
- It requires an extra system call that shouldn't be necessary.
- It doesn't work on (IMO sensible) filesystems that don't support
hard links (e.g. vfat).
- It's not atomic -- there's an intermediate state where both files exist.
- It's ugly.
The new rename flag will make this totally sensible.
To be fair, on new enough kernels, you can also use O_TMPFILE and
linkat to achieve the same thing even more cleanly."
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
functionality for bigalloc file systems.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ofDv
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Bug fixes and cleanups for ext4. We also enable the punch hole
functionality for bigalloc file systems"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: delete "set but not used" variables
ext4: don't pass freed handle to ext4_walk_page_buffers
ext4: avoid clearing beyond i_blocks when truncating an inline data file
ext4: ext4_inode_is_fast_symlink should use EXT4_CLUSTER_SIZE
ext4: fix a typo in extents.c
ext4: use %pd printk specificer
ext4: standardize error handling in ext4_da_write_inline_data_begin()
ext4: retry allocation when inline->extent conversion failed
ext4: enable punch hole for bigalloc
Use the new %pd printk() specifier in Ext4 to replace passing of
dentry name or dentry name and name length * 2 with just passing the
dentry.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
cc: Andreas Dilger <adilger.kernel@dilger.ca>
cc: linux-ext4@vger.kernel.org
When ext4_rename() overwrites an already existing file, call
ext4_alloc_da_blocks() before starting the journal handle which
actually does the rename, instead of doing this afterwards. This
improves the likelihood that the contents will survive a crash if an
application replaces a file using the sequence:
1) write replacement contents to foo.new
2) <omit fsync of foo.new>
3) rename foo.new to foo
It is still not a guarantee, since ext4_alloc_da_blocks() is *not*
doing a file integrity sync; this means if foo.new is a very large
file, it may not be completely flushed out to disk.
However, for files smaller than a megabyte or so, any dirty pages
should be flushed out before we do the rename operation, and so at the
next journal commit, the CACHE FLUSH command will make sure al of
these pages are safely on the disk platter.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_rename(), don't start the journal handle until the the
directory entries have been successfully looked up.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pull second set of VFS changes from Al Viro:
"Assorted f_pos race fixes, making do_splice_direct() safe to call with
i_mutex on parent, O_TMPFILE support, Jeff's locks.c series,
->d_hash/->d_compare calling conventions changes from Linus, misc
stuff all over the place."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
Document ->tmpfile()
ext4: ->tmpfile() support
vfs: export lseek_execute() to modules
lseek_execute() doesn't need an inode passed to it
block_dev: switch to fixed_size_llseek()
cpqphp_sysfs: switch to fixed_size_llseek()
tile-srom: switch to fixed_size_llseek()
proc_powerpc: switch to fixed_size_llseek()
ubi/cdev: switch to fixed_size_llseek()
pci/proc: switch to fixed_size_llseek()
isapnp: switch to fixed_size_llseek()
lpfc: switch to fixed_size_llseek()
locks: give the blocked_hash its own spinlock
locks: add a new "lm_owner_key" lock operation
locks: turn the blocked_list into a hashtable
locks: convert fl_link to a hlist_node
locks: avoid taking global lock if possible when waking up blocked waiters
locks: protect most of the file_lock handling with i_lock
locks: encapsulate the fl_link list handling
locks: make "added" in __posix_lock_file a bool
...
Both ext3 and ext4 htree_dirblock_to_tree() is just filling the
in-core rbtree for use by call_filldir(). All updates of ->f_pos are
done by the latter; bumping it here (on error) is obviously wrong - we
might very well have it nowhere near the block we'd found an error in.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Zach reported a problem that if inline data is enabled, we don't
tell the difference between the offset of '.' and '..'. And a
getdents will fail if the user only want to get '.' and what's worse,
if there is a conversion happens when the user calls getdents
many times, he/she may get the same entry twice.
In theory, a dir block would also fail if it is converted to a
hashed-index based dir since f_pos will become a hash value, not the
real one, but it doesn't happen. And a deep investigation shows that
we uses a hash based solution even for a normal dir if the dir_index
feature is enabled.
So this patch just adds a new htree_inlinedir_to_tree for inline dir,
and if we find that the hash index is supported, we will do like what
we do for a dir block.
Reported-by: Zach Brown <zab@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Inode allocation transaction is pretty heavy (246 credits with quotas
and extents before previous patch, still around 200 after it). This is
mostly due to credits required for allocation of quota structures
(credits there are heavily overestimated but it's difficult to make
better estimates if we don't want to wire non-trivial assumptions about
quota format into filesystem).
So move quota initialization out of allocation transaction. That way
transaction for quota structure allocation will be started only if we
need to look up quota structure on disk (rare) and furthermore it will
be started for each quota type separately, not for all of them at once.
This reduces maximum transaction size to 34 is most cases and to 73 in
the worst case.
[ Modified by tytso to clean up the cleanup paths for error handling.
Also use a separate call to ext4_std_error() for each failure so it
is easier for someone who is debugging a problem in this function to
determine which function call failed. ]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
the "punch hole" functionality for inodes that are not using extent
maps.
In the bug fix category, we fixed some races in the AIO and fstrim
code, and some potential NULL pointer dereferences and memory leaks in
error handling code paths.
In the optimization category, we fixed a performance regression in the
jbd2 layer introduced by commit d9b0193 (introduced in v3.0) which
shows up in the AIM7 benchmark. We also further optimized jbd2 by
minimize the amount of time that transaction handles are held active.
This patch series also features some additional enhancement of the
extent status tree, which is now used to cache extent information in a
more efficient/compact form than what we use on-disk.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=KSV1
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Theodore Ts'o:
"The one new feature added in this patch series is the ability to use
the "punch hole" functionality for inodes that are not using extent
maps.
In the bug fix category, we fixed some races in the AIO and fstrim
code, and some potential NULL pointer dereferences and memory leaks in
error handling code paths.
In the optimization category, we fixed a performance regression in the
jbd2 layer introduced by commit d9b01934d5 ("jbd: fix fsync() tid
wraparound bug", introduced in v3.0) which shows up in the AIM7
benchmark. We also further optimized jbd2 by minimize the amount of
time that transaction handles are held active.
This patch series also features some additional enhancement of the
extent status tree, which is now used to cache extent information in a
more efficient/compact form than what we use on-disk."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (65 commits)
ext4: fix free clusters calculation in bigalloc filesystem
ext4: no need to remove extent if len is 0 in ext4_es_remove_extent()
ext4: fix xattr block allocation/release with bigalloc
ext4: reclaim extents from extent status tree
ext4: adjust some functions for reclaiming extents from extent status tree
ext4: remove single extent cache
ext4: lookup block mapping in extent status tree
ext4: track all extent status in extent status tree
ext4: let ext4_ext_map_blocks return EXT4_MAP_UNWRITTEN flag
ext4: rename and improbe ext4_es_find_extent()
ext4: add physical block and status member into extent status tree
ext4: refine extent status tree
ext4: use ERR_PTR() abstraction for ext4_append()
ext4: refactor code to read directory blocks into ext4_read_dirblock()
ext4: add debugging context for warning in ext4_da_update_reserve_space()
ext4: use KERN_WARNING for warning messages
jbd2: use module parameters instead of debugfs for jbd_debug
ext4: use module parameters instead of debugfs for mballoc_debug
ext4: start handle at the last possible moment when creating inodes
ext4: fix the number of credits needed for acl ops with inline data
...
Use ERR_PTR()/IS_ERR() abstraction instead of passing in a separate
pointer to an integer for the error code, as a code cleanup.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The code to read in directory blocks and verify their metadata
checksums was replicated in ten different places across
fs/ext4/namei.c, and the code was buggy in subtle ways in a number of
those replicated sites. In some cases, ext4_error() was called with a
training newline. In others, in particularly in empty_dir(), it was
possible to call ext4_dirent_csum_verify() on an index block, which
would trigger false warnings requesting the system adminsitrator to
run e2fsck.
By refactoring the code, we make the code more readable, as well as
shrinking the compiled object file by over 700 bytes and 50 lines of
code.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_{create,mknod,mkdir,symlink}(), don't start the journal handle
until the inode has been succesfully allocated. In order to do this,
we need to start the handle in the ext4_new_inode(). So create a new
variant of this function, ext4_new_inode_start_handle(), so the handle
can be created at the last possible minute, before we need to modify
the inode allocation bitmap block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4_unlink() and ext4_rmdir() don't actually release the blocks
associated with the file/directory. This gets done in a separate jbd2
handle called via ext4_evict_inode(). Thus, we don't need to reserve
lots of journal credits for the truncate.
Note that using too many journal credits is non-optimal because it can
leading to the journal transmit getting closed too early, before it is
strictly necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Don't start the jbd2 transaction handle until after the directory
entry has been found, to minimize the amount of time that a handle is
held active.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Don't start the jbd2 transaction handle until after the directory
entry has been found, to minimize the amount of time that a handle is
held active.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
So we can better understand what bits of ext4 are responsible for
long-running jbd2 handles, use jbd2__journal_start() so we can pass
context information for logging purposes.
The recommended way for finding the longer-running handles is:
T=/sys/kernel/debug/tracing
EVENT=$T/events/jbd2/jbd2_handle_stats
echo "interval > 5" > $EVENT/filter
echo 1 > $EVENT/enable
./run-my-fs-benchmark
cat $T/trace > /tmp/problem-handles
This will list handles that were active for longer than 20ms. Having
longer-running handles is bad, because a commit started at the wrong
time could stall for those 20+ milliseconds, which could delay an
fsync() or an O_SYNC operation. Here is an example line from the
trace file describing a handle which lived on for 311 jiffies, or over
1.2 seconds:
postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32
tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
dirtied_blocks 0
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
brelse() and ext4_journal_force_commit() are both inlined and able
to handle NULL.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After commit 978fef9 (create __ext4_insert_dentry for dir entry
insertion), 'reclen' is not used anymore.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Commit b0336e8d (ext4: calculate and verify checksums of directory
leaf blocks) and commit dbe89444 (ext4: Calculate and verify checksums
for htree nodes) forget to release buffer when checksum failed, at
some places.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
This macro, initially introduced by ext2 in v0.99.15, does not
have any users from the beginning. It has been removed in later
ext2 version but still remains in the code of ext3, ext4, ocfs2.
Remove this macro there.
Cc: Jan Kara <jack@suse.cz>
Cc: linux-ext4@vger.kernel.org
Cc: ocfs2-devel@oss.oracle.com
Acked-by: Mark Fasheh <mfasheh@suse.de>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This fixes a buffer cache leak when creating a directory, introduced
in commit a774f9c20.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
If checksum fails, we should also release the buffer
read from previous iteration.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>-
Cc: stable@vger.kernel.org
--
fs/ext4/namei.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
When trying to mount a file system which does not contain a journal,
but which does have a orphan list containing an inode which needs to
be truncated, the mount call with hang forever in
ext4_orphan_cleanup() because ext4_orphan_del() will return
immediately without removing the inode from the orphan list, leading
to an uninterruptible loop in kernel code which will busy out one of
the CPU's on the system.
This can be trivially reproduced by trying to mount the file system
found in tests/f_orphan_extents_inode/image.gz from the e2fsprogs
source tree. If a malicious user were to put this on a USB stick, and
mount it on a Linux desktop which has automatic mounts enabled, this
could be considered a potential denial of service attack. (Not a big
deal in practice, but professional paranoids worry about such things,
and have even been known to allocate CVE numbers for such problems.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
Ted has sent out a RFC about removing this feature. Eric and Jan
confirmed that both RedHat and SUSE enable this feature in all their
product. David also said that "As far as I know, it's enabled in all
Android kernels that use ext4." So it seems OK for us.
And what's more, as inline data depends its implementation on xattr,
and to be frank, I don't run any test again inline data enabled while
xattr disabled. So I think we should add inline data and remove this
config option in the same release.
[ The savings if you disable CONFIG_EXT4_FS_XATTR is only 27k, which
isn't much in the grand scheme of things. Since no one seems to be
testing this configuration except for some automated compile farms, on
balance we are better removing this config option, and so that it is
effectively always enabled. -- tytso ]
Cc: David Brown <davidb@codeaurora.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In case we rename a directory, ext4_rename has to read the dir block
and change its dotdot's information. The old ext4_rename encapsulated
the dir_block read into itself. So this patch adds a new function
ext4_get_first_dir_block() which gets the dir buffer information so
the ext4_rename can handle it properly. As it will also change the
parent inode number, we return the parent_de so that ext4_rename() can
handle it more easily.
ext4_find_entry is also changed so that the caller(rename) can tell
whether the found entry is an inlined one or not and journaling the
corresponding buffer head.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
empty_dir is used when deleting a dir. So it should handle inline dir
properly.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently ext4_delete_entry() is used only for dir entry removing from
a dir block. So let us create a new function
ext4_generic_delete_entry and this function takes a entry_buf and a
buf_size so that it can be used for inline data.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create a new function ext4_find_inline_entry() to handle the case of
inline data.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
search_dirblock is used to search a dir block, but the code is almost
the same for searching an inline dir.
So create a new fuction search_dir and let search_dirblock call it.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch let add_dir_entry handle the inline data case. So the
dir is initialized as inline dir first and then we can try to add
some files to it, when the inline space can't hold all the entries,
a dir block will be created and the dir entry will be moved to it.
Also for an inlined dir, "." and ".." are removed and we only use
4 bytes to store the parent inode number. These 2 entries will be
added when we convert an inline dir to a block-based one.
[ Folded in patch from Dan Carpenter to remove an unused variable. ]
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The old add_dirent_to_buf handles all the work related to the
work of adding dir entry to a dir block. Now we have inline data,
so create 2 new function __ext4_find_dest_de and __ext4_insert_dentry
that do the real work and let add_dirent_to_buf call them.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The __ext4_check_dir_entry() function() is used to check whether the
de is over the block boundary. Now with inline data, it could be
within the block boundary while exceeds the inode size. So check this
function to check the overflow more precisely.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently, the initialization of dot and dotdot are encapsulated in
ext4_mkdir and also bond with dir_block. So create a new function
named ext4_init_new_dir and the initialization is moved to
ext4_init_dot_dotdot. Now it will called either in the normal non-inline
case(rec_len of ".." will cover the whole block) or when we converting an
inline dir to a block(rec len of ".." will be the real length). The start
of the next entry is also returned for inline dir usage.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
During a directory entry lookup of a hashed directory, if the
hash-based lookup functions fail and we fall back to a linear scan,
don't try to verify the dirent checksum on the internal nodes of the
hash tree because they don't store a checksum in a hidden dirent like
the leaf nodes do.
Reported-by: George Spelvin <linux@horizon.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If there is no space for a checksum in a directory leaf node,
previously we would use EXT4_ERROR_INODE() which would mark the file
system as inconsistent. While it would be nice to use e2fsck -D, it
certainly isn't required, so just print a warning using
ext4_warning().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
When ext4_bread() returns NULL and err is set to zero, this means
there is no phyical block mapped to the specified logical block
number. (Previous to commit 90b0a97323, err was uninitialized in this
case, which caused other problems.)
The directory handling routines use ext4_bread() in many places, the
fact that ext4_bread() now returns NULL with err set to zero could
cause problems since a number of these functions will simply return
the value of err if the result of ext4_bread() was the NULL pointer,
causing the caller of the function to think that the function was
successful.
Since directories should never contain holes, this case can only
happen if the file system is corrupted. This commit audits all of the
callers of ext4_bread(), and makes sure they do the right thing if a
hole in a directory is found by ext4_bread().
Some ext4_bread() callers did not need any changes either because they
already had its own hole detector paths.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_special_inode_operations have their own ifdef CONFIG_EXT4_FS_XATTR
to mask those methods. And ext4_iget also always sets it, so there is
an inconsistency.
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Instead of checking whether the handle is valid, we check if journal
is enabled. This avoids taking the s_orphan_lock mutex in all cases
when there is no journal in use, including the error paths where
ext4_orphan_del() is called with a handle set to NULL.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
htree_dirblock_to_tree() declares a non-initialized 'err' variable,
which is passed as a reference to another functions expecting them to
set this variable with their error codes.
It's passed to ext4_bread(), which then passes it to ext4_getblk(). If
ext4_map_blocks() returns 0 due to a lookup failure, leaving the
ext4_getblk() buffer_head uninitialized, it will make ext4_getblk()
return to ext4_bread() without initialize the 'err' variable, and
ext4_bread() will return to htree_dirblock_to_tree() with this variable
still uninitialized. htree_dirblock_to_tree() will pass this variable
with garbage back to ext4_htree_fill_tree(), which expects a number of
directory entries added to the rb-tree. which, in case, might return a
fake non-zero value due the garbage left in the 'err' variable, leading
the kernel to an Oops in ext4_dx_readdir(), once this is expecting a
filled rb-tree node, when in turn it will have a NULL-ed one, causing an
invalid page request when trying to get a fname struct from this NULL-ed
rb-tree node in this line:
fname = rb_entry(info->curr_node, struct fname, rb_hash);
The patch itself initializes the err variable in
htree_dirblock_to_tree() to avoid usage mistakes by the called
functions, and also fix ext4_getblk() to return a initialized 'err'
variable when ext4_map_blocks() fails a lookup.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Very large directories can cause significant performance problems, or
perhaps even invoke the OOM killer, if the process is running in a
highly constrained memory environment (whether it is VM's with a small
amount of memory or in a small memory cgroup).
So it is useful, in cloud server/data center environments, to be able
to set a filesystem-wide cap on the maximum size of a directory, to
ensure that directories never get larger than a sane size. We do this
via a new mount option, max_dir_size_kb. If there is an attempt to
grow the directory larger than max_dir_size_kb, the system call will
return ENOSPC instead.
Google-Bug-Id: 6863013
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
greatest note is a speed up for parallel, non-allocating DIO writes,
since we no longer take the i_mutex lock in that case. For bug fixes,
we fix an incorrect overhead calculation which caused slightly
incorrect results for df(1) and statfs(2). We also fixed bugs in the
metadata checksum feature.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=VAVB
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The usual collection of bug fixes and optimizations. Perhaps of
greatest note is a speed up for parallel, non-allocating DIO writes,
since we no longer take the i_mutex lock in that case.
For bug fixes, we fix an incorrect overhead calculation which caused
slightly incorrect results for df(1) and statfs(2). We also fixed
bugs in the metadata checksum feature."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: undo ext4_calc_metadata_amount if we fail to claim space
ext4: don't let i_reserved_meta_blocks go negative
ext4: fix hole punch failure when depth is greater than 0
ext4: remove unnecessary argument from __ext4_handle_dirty_metadata()
ext4: weed out ext4_write_super
ext4: remove unnecessary superblock dirtying
ext4: convert last user of ext4_mark_super_dirty() to ext4_handle_dirty_super()
ext4: remove useless marking of superblock dirty
ext4: fix ext4 mismerge back in January
ext4: remove dynamic array size in ext4_chksum()
ext4: remove unused variable in ext4_update_super()
ext4: make quota as first class supported feature
ext4: don't take the i_mutex lock when doing DIO overwrites
ext4: add a new nolock flag in ext4_map_blocks
ext4: split ext4_file_write into buffered IO and direct IO
ext4: remove an unused statement in ext4_mb_get_buddy_page_lock()
ext4: fix out-of-date comments in extents.c
ext4: use s_csum_seed instead of i_csum_seed for xattr block
ext4: use proper csum calculation in ext4_rename
ext4: fix overhead calculation used by ext4_statfs()
...
The '__ext4_handle_dirty_metadata()' does not need the 'now' argument
anymore and we can kill it.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
boolean "does it have to be exclusive?" flag is passed instead;
Local filesystem should just ignore it - the object is guaranteed
not to be there yet.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Just the flags; only NFS cares even about that, but there are
legitimate uses for such argument. And getting rid of that
completely would require splitting ->lookup() into a couple
of methods (at least), so let's leave that alone for now...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In ext4_rename, when the old name is a dir, we need to
change ".." to its new parent and journal the change, so
with metadata_csum enabled, we have to re-calc the csum.
As the first block of the dir can be either a htree root
or a normal directory block and we have different csum
calculation for these 2 types, we have to choose the right
one in ext4_rename.
btw, it is found by xfstests 013.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
The major new feature added in this update is Darrick J. Wong's
metadata checksum feature, which adds crc32 checksums to ext4's
metadata fields. There is also the usual set of cleanups and bug
fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=SdJJ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull Ext4 updates from Theodore Ts'o:
"The major new feature added in this update is Darrick J Wong's
metadata checksum feature, which adds crc32 checksums to ext4's
metadata fields.
There is also the usual set of cleanups and bug fixes."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (44 commits)
ext4: hole-punch use truncate_pagecache_range
jbd2: use kmem_cache_zalloc wrapper instead of flag
ext4: remove mb_groups before tearing down the buddy_cache
ext4: add ext4_mb_unload_buddy in the error path
ext4: don't trash state flags in EXT4_IOC_SETFLAGS
ext4: let getattr report the right blocks in delalloc+bigalloc
ext4: add missing save_error_info() to ext4_error()
ext4: add debugging trigger for ext4_error()
ext4: protect group inode free counting with group lock
ext4: use consistent ssize_t type in ext4_file_write()
ext4: fix format flag in ext4_ext_binsearch_idx()
ext4: cleanup in ext4_discard_allocated_blocks()
ext4: return ENOMEM when mounts fail due to lack of memory
ext4: remove redundundant "(char *) bh->b_data" casts
ext4: disallow hard-linked directory in ext4_lookup
ext4: fix potential integer overflow in alloc_flex_gd()
ext4: remove needs_recovery in ext4_mb_init()
ext4: force ro mount if ext4_setup_super() fails
ext4: fix potential NULL dereference in ext4_free_inodes_counts()
ext4/jbd2: add metadata checksumming to the list of supported features
...
A hard-linked directory to its parent can cause the VFS to deadlock,
and is a sign of a corrupted file system. So detect this case in
ext4_lookup(), before the rmdir() lockup scenario can take place.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
This allows comparing hash and len in one operation on 64-bit
architectures. Right now only __d_lookup_rcu() takes advantage of this,
since that is the case we care most about.
The use of anonymous struct/unions hides the alternate 64-bit approach
from most users, the exception being a few cases where we initialize a
'struct qstr' with a static initializer. This makes the problematic
cases use a new QSTR_INIT() helper function for that (but initializing
just the name pointer with a "{ .name = xyzzy }" initializer remains
valid, as does just copying another qstr structure).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
None of this function callers ever pass in a NULL inode pointer, so
this check is unnecessary, and the else clause is dead code. (This
change should make the code coverage people a little happier. :-)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate and verify the checksums for directory leaf blocks
(i.e. blocks that only contain actual directory entries). The
checksum lives in what looks to be an unused directory entry with a 0
name_len at the end of the block. This scheme is not used for
internal htree nodes because the mechanism in place there only costs
one dx_entry, whereas the "empty" directory entry would cost two
dx_entries.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate and verify the checksum for directory index tree (htree)
node blocks. The checksum is stored in the last 4 bytes of the htree
block and requires the dx_entry array to stop 1 dx_entry short of the
end of the block.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate and verify the superblock checksum. Since the UUID and
block group number are embedded in each copy of the superblock, we
need only checksum the entire block. Refactor some of the code to
eliminate open-coding of the checksum update call.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Define flags and change structure definitions to allow checksumming of
ext4 metadata.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix ext4_warning format flag in dx_probe().
CC: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Both ext3 and ext4 put the half-created symlink inode into the orphan list
for a while (see the comment in ext[34]_symlink() for gory details). Then,
if everything went fine, they pull it out of the orphan list and bump the
link count back to 1. The thing is, inc_nlink() is going to complain about
seeing somebody changing i_nlink from 0 to 1. With a good reason, since
normally something like that is a bug. Explicit set_nlink(inode, 1) does
the same thing as inc_nlink() here, but it does *not* complain - exactly
because it should be usable in strange situations like this one.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (97 commits)
jbd2: Unify log messages in jbd2 code
jbd/jbd2: validate sb->s_first in journal_get_superblock()
ext4: let ext4_ext_rm_leaf work with EXT_DEBUG defined
ext4: fix a syntax error in ext4_ext_insert_extent when debugging enabled
ext4: fix a typo in struct ext4_allocation_context
ext4: Don't normalize an falloc request if it can fit in 1 extent.
ext4: remove comments about extent mount option in ext4_new_inode()
ext4: let ext4_discard_partial_buffers handle unaligned range correctly
ext4: return ENOMEM if find_or_create_pages fails
ext4: move vars to local scope in ext4_discard_partial_page_buffers_no_lock()
ext4: Create helper function for EXT4_IO_END_UNWRITTEN and i_aiodio_unwritten
ext4: optimize locking for end_io extent conversion
ext4: remove unnecessary call to waitqueue_active()
ext4: Use correct locking for ext4_end_io_nolock()
ext4: fix race in xattr block allocation path
ext4: trace punch_hole correctly in ext4_ext_map_blocks
ext4: clean up AGGRESSIVE_TEST code
ext4: move variables to their scope
ext4: fix quota accounting during migration
ext4: migrate cleanup
...
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The tmp_inode should have same uid/gid as the original inode.
Otherwise new metadata blocks will be accounted to wrong quota-id,
which will result in a quota leak after the inode migration is
completed.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a directory with more than EXT4_LINK_MAX subdirectories, the nlink
count is set to 1. Subsequently, if any subdirectories are deleted,
ext4_dec_count() decrements the i_nlink count, which may go to 0
temporarily before being incremented back to 1.
While this is done under i_mutex, which prevents races for directory
and inode operations that check i_nlink, the temporary i_nlink == 0
case is exposed to userspace via stat() and similar calls that do not
hold i_mutex.
Instead, change the code to not decrement i_nlink count for any
directories that do not already have i_nlink larger than 2.
Reported-by: Cliff White <cliffw@whamcloud.com>
Reviewed-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_dx_add_entry manipulates bh2 and frames[0].bh, which are two buffer_heads
that point to directory blocks assigned to the directory inode. However, the
function calls ext4_handle_dirty_metadata with the inode of the file that's
being added to the directory, not the directory inode itself. Therefore,
correct the code to dirty the directory buffers with the directory inode, not
the file inode.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
ext4_mkdir calls ext4_handle_dirty_metadata with dir_block and the inode "dir".
Unfortunately, dir_block belongs to the newly created directory (which is
"inode"), not the parent directory (which is "dir"). Fix the incorrect
association.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
When ext4_rename performs a directory rename (move), dir_bh is a
buffer that is modified to update the '..' link in the directory being
moved (old_inode). However, ext4_handle_dirty_metadata is called with
the old parent directory inode (old_dir) and dir_bh, which is
incorrect because dir_bh does not belong to the parent inode. Fix
this error.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule,
and lave REQ_META purely for marking requests as metadata in blktrace.
All existing callers of REQ_META except for XFS are updated to also
set REQ_PRIO for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Replace all occurnanced of the undocumented READ_META with READ | REQ_META
and remove the unused WRITE_META define.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Commit df5e622340 ("ext4: fix deadlock in ext4_symlink() in ENOSPC
conditions") recalculated the number of credits needed for a long
symlink, in the process of splitting it into two transactions. However,
the first credit calculation under-counted because if selinux is
enabled, credits are needed to create the selinux xattr as well.
Overrunning the reservation will result in an OOPS in
jbd2_journal_dirty_metadata() due to this assert:
J_ASSERT_JH(jh, handle->h_buffer_credits > 0);
Fix this by increasing the reservation size.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits)
ext4: prevent memory leaks from ext4_mb_init_backend() on error path
ext4: use EXT4_BAD_INO for buddy cache to avoid colliding with valid inode #
ext4: use ext4_msg() instead of printk in mballoc
ext4: use ext4_kvzalloc()/ext4_kvmalloc() for s_group_desc and s_group_info
ext4: introduce ext4_kvmalloc(), ext4_kzalloc(), and ext4_kvfree()
ext4: use the correct error exit path in ext4_init_inode_table()
ext4: add missing kfree() on error return path in add_new_gdb()
ext4: change umode_t in tracepoint headers to be an explicit __u16
ext4: fix races in ext4_sync_parent()
ext4: Fix overflow caused by missing cast in ext4_fallocate()
ext4: add action of moving index in ext4_ext_rm_idx for Punch Hole
ext4: simplify parameters of reserve_backup_gdb()
ext4: simplify parameters of add_new_gdb()
ext4: remove lock_buffer in bclean() and setup_new_group_blocks()
ext4: simplify journal handling in setup_new_group_blocks()
ext4: let setup_new_group_blocks() set multiple bits at a time
ext4: fix a typo in ext4_group_extend()
ext4: let ext4_group_add_blocks() handle 0 blocks quickly
ext4: let ext4_group_add_blocks() return an error code
ext4: rename ext4_add_groupblocks() to ext4_group_add_blocks()
...
Fix up conflict in fs/ext4/inode.c: commit aacfc19c62 ("fs: simplify
the blockdev_direct_IO prototype") had changed the ext4_ind_direct_IO()
function for the new simplified calling convention, while commit
dae1e52cb1 ("ext4: move ext4_ind_* functions from inode.c to
indirect.c") moved the function to another file.
Replace the ->check_acl method with a ->get_acl method that simply reads an
ACL from disk after having a cache miss. This means we can replace the ACL
checking boilerplate code with a single implementation in namei.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Compilation of ext4/namei.c brought up an error and warning messages
when compiled with -DDX_DEBUG
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The comment from Al Viro about possible race in the ext4_orphan_add() is
not justified. There is no race possible as we always have either i_mutex
locked, or the inode can not be referenced from outside hence the
J_ASSERS should not be hit from the reason described in comment.
This commit replaces it with notion that we are holding i_mutex so it
should not be possible for i_nlink to be changed while waiting for
s_orphan_lock.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix for a null pointer bug found while running punch hole tests
Signed-off-by: Allison Henderson <achender@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_symlink() cannot call __page_symlink() with transaction open.
__page_symlink() calls ext4_write_begin() which can wait for
transaction commit if we are running out of space thus causing a
deadlock. Also error recovery in ext4_truncate_failed_write() does not
count with the transaction being already started (although I'm not
aware of any particular deadlock here).
Fix the problem by stopping a transaction before calling
__page_symlink() (we have to be careful and put inode to orphan list
so that it gets deleted in case of crash) and starting another one
after __page_symlink() returns for addition of symlink into a
directory.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When make_indexed_dir() fails (e.g. because of ENOSPC) after it has
allocated block for index tree root, we did not properly mark all
changed buffers dirty. This lead to only some of these buffers being
written out and thus effectively corrupting the directory.
Fix the issue by marking all changed data dirty even in the error
failure case.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (43 commits)
ext4: fix a BUG in mb_mark_used during trim.
ext4: unused variables cleanup in fs/ext4/extents.c
ext4: remove redundant set_buffer_mapped() in ext4_da_get_block_prep()
ext4: add more tracepoints and use dev_t in the trace buffer
ext4: don't kfree uninitialized s_group_info members
ext4: add missing space in printk's in __ext4_grp_locked_error()
ext4: add FITRIM to compat_ioctl.
ext4: handle errors in ext4_clear_blocks()
ext4: unify the ext4_handle_release_buffer() api
ext4: handle errors in ext4_rename
jbd2: add COW fields to struct jbd2_journal_handle
jbd2: add the b_cow_tid field to journal_head struct
ext4: Initialize fsync transaction ids in ext4_new_inode()
ext4: Use single thread to perform DIO unwritten convertion
ext4: optimize ext4_bio_write_page() when no extent conversion is needed
ext4: skip orphan cleanup if fs has unknown ROCOMPAT features
ext4: use the nblocks arg to ext4_truncate_restart_trans()
ext4: fix missing iput of root inode for some mount error paths
ext4: make FIEMAP and delayed allocation play well together
ext4: suppress verbose debugging information if malloc-debug is off
...
Fi up conflicts in fs/ext4/super.c due to workqueue changes
- Add more ext4 tracepoints.
- Change ext4 tracepoints to use dev_t field with MAJOR/MINOR macros
so that we can save 4 bytes in the ring buffer on some platforms.
- Add sync_mode to ext4_da_writepages, ext4_da_write_pages, and
ext4_da_writepages_result tracepoints. Also remove for_reclaim
field from ext4_da_writepages since it is usually not very useful.
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Checking return code from ext4_journal_get_write_access() is important
with snapshots, because this function invokes COW, so may return new
errors, such as ENOSPC.
We move the call to ext4_journal_get_write_access earlier in the
function, to simplify error handling in the case that this function
returns returns an error.
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that VFS check for inode->i_nlink == 0 and returns proper
error, remove similar check from file system
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Call ext4_std_error() in various places when we can't bail out
cleanly, so the file system can be marked as in error.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check return value of ext4_journal_get_write_access,
ext4_journal_dirty_metadata and ext4_mark_inode_dirty. Move brelse()
under 'out_stop' to release bh properly in case of journal error.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function gets called a lot for large directories, and the answer
is almost always "no, no, there's no problem". This means using
unlikely() is a good thing.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
IS_ERR() already implies unlikely(), so it can be omitted here.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There should be a check for the NUL character instead of '0'.
Fortunately the only thing that cares about this is NFS serving, which
is why we didn't notice this in the merge window testing.
Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use the search_dirblock() in ext4_dx_find_entry(). It makes the code
easier to read, and it takes advantage of common code. It also saves
100 bytes or so of text space.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>
If the first block of htree directory is missing '.' or '..' but is
otherwise a valid directory, and we do a lookup for '.' or '..', it's
possible to dereference an uninitialized memory pointer in
ext4_htree_next_block().
We avoid this by moving the special case from ext4_dx_find_entry() to
ext4_find_entry(); this also means we can optimize ext4_find_entry()
slightly when NFS looks up "..".
Thanks to Brad Spengler for pointing a Clang warning that led me to
look more closely at this code. The warning was harmless, but it was
useful in pointing out code that was too ugly to live. This warning was
also reported by Roman Borisov.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>
commit 3d0518f4, "ext4: New rec_len encoding for very
large blocksizes" made several changes to this path, but from
a perf perspective, un-inlining ext4_rec_len_from_disk() seems
most significant. This function is called from ext4_check_dir_entry(),
which on a file-creation workload is called extremely often.
I tested this with bonnie:
# bonnie++ -u root -s 0 -f -x 200 -d /mnt/test -n 32
(this does 200 iterations) and got this for the file creations:
ext4 stock: Average = 21206.8 files/s
ext4 inlined: Average = 22346.7 files/s (+5%)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
No real bugs found, just removed some dead code.
Found by gcc 4.6's new warnings.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new ext4 state to tell us when a file has been newly created; use
that state in ext4_sync_file in no-journal mode to tell us when we need
to sync the parent directory as well as the inode and data itself. This
fixes a problem in which a panic or power failure may lose the entire
file even when using fsync, since the parent directory entry is lost.
Addresses-Google-Bug: #2480057
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
At several places we modify EXT4_I(inode)->i_flags without holding
i_mutex (ext4_do_update_inode, ...). These modifications are racy and
we can lose updates to i_flags. So convert handling of i_flags to use
bitops which are atomic.
https://bugzilla.kernel.org/show_bug.cgi?id=15792
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
EXT4_ERROR_INODE() tends to provide better error information and in a
more consistent format. Some errors were not even identifying the inode
or directory which was corrupted, which made them not very useful.
Addresses-Google-Bug: #2507977
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently various places in the VFS call vfs_dq_init directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the initialization. For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.
For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.
For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.
Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
In case of truncate errors we explicitly remove inode from in-core
orphan list via orphan_del(NULL, inode) without modifying the on-disk list.
But later on, the same inode may be inserted in the orphan list again
which will result the on-disk linked list getting corrupted. If inode
i_dtime contains valid value, then skip on-disk list modification.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calls to ext4_handle_dirty_metadata should only pass in an inode
pointer for inode-specific metadata, and not for shared metadata
blocks such as inode table blocks, block group descriptors, the
superblock, etc.
The BUG_ON can get tripped when updating a special device (such as a
block device) that is opened (so that i_mapping is set in
fs/block_dev.c) and the file system is mounted in no journal mode.
Addresses-Google-Bug: #2404870
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Just a pet peeve of mine; we had a mishash of calls with either __func__
or "function_name" and the latter tends to get out of sync.
I think it's easier to just hide the __func__ in a macro, and it'll
be consistent from then on.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently all quota block reservation macros contains hard-coded "2"
aka MAXQUOTAS value. This is no good because in some places it is not
obvious to understand what does this digit represent. Let's introduce
new macro with self descriptive name.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Acked-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously add_dirent_to_buf() did not free its passed-in buffer head
in the case of ENOSPC, since in some cases the caller still needed it.
However, this led to potential buffer head leaks since not all callers
dealt with this correctly. Fix this by making simplifying the freeing
convention; now add_dirent_to_buf() *never* frees the passed-in buffer
head, and leaves that to the responsibility of its caller. This makes
things cleaner and easier to prove that the code is neither leaking
buffer heads or calling brelse() one time too many.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Curt Wohlgemuth <curtw@google.com>
Cc: stable@kernel.org
This is a partial revert of commit 6487a9d (only the changes made to
fs/ext4/namei.c), since it is causing the following brelse()
double-free warning when running fsstress on a file system with 1k
blocksize and we run into a block allocation failure while converting
a single-block directory to a multi-block hash-tree indexed directory.
WARNING: at fs/buffer.c:1197 __brelse+0x2e/0x33()
Hardware name:
VFS: brelse: Trying to free free buffer
Modules linked in:
Pid: 2226, comm: jbd2/sdd-8 Not tainted 2.6.32-rc6-00577-g0003f55 #101
Call Trace:
[<c01587fb>] warn_slowpath_common+0x65/0x95
[<c0158869>] warn_slowpath_fmt+0x29/0x2c
[<c021168e>] __brelse+0x2e/0x33
[<c0288a9f>] jbd2_journal_refile_buffer+0x67/0x6c
[<c028a9ed>] jbd2_journal_commit_transaction+0x319/0x14d8
[<c0164d73>] ? try_to_del_timer_sync+0x58/0x60
[<c0175bcc>] ? sched_clock_cpu+0x12a/0x13e
[<c017f6b4>] ? trace_hardirqs_off+0xb/0xd
[<c0175c1f>] ? cpu_clock+0x3f/0x5b
[<c017f6ec>] ? lock_release_holdtime+0x36/0x137
[<c0664ad0>] ? _spin_unlock_irqrestore+0x44/0x51
[<c0180af3>] ? trace_hardirqs_on_caller+0x103/0x124
[<c0180b1f>] ? trace_hardirqs_on+0xb/0xd
[<c0164d73>] ? try_to_del_timer_sync+0x58/0x60
[<c0290d1c>] kjournald2+0x11a/0x310
[<c017118e>] ? autoremove_wake_function+0x0/0x38
[<c0290c02>] ? kjournald2+0x0/0x310
[<c0170ee6>] kthread+0x66/0x6b
[<c0170e80>] ? kthread+0x0/0x6b
[<c01251b3>] kernel_thread_helper+0x7/0x10
---[ end trace 5579351b86af61e3 ]---
Commit 6487a9d was an attempt some buffer head leaks in an ENOSPC
error path, but in some cases it actually results in an excess ENOSPC,
as shown above. Fixing this means cleaning up who is responsible for
releasing the buffer heads from the callee to the caller of
add_dirent_to_buf().
Since that's a relatively complex change, and we're late in the rcX
development cycle, I'm reverting this now, and holding back a more
complete fix until after 2.6.32 ships. We've lived with this
buffer_head leak on ENOSPC in ext3 and ext4 for a very long time; a
few more months won't kill us.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Curt Wohlgemuth <curtw@google.com>
This patch fixes a problem with handling nested calls to
ext4_journal_start/ext4_journal_stop, when there is no journal present.
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When ext4_dx_add_entry() has to split an index node, it has to ensure that
name_len of dx_node's fake_dirent is also zero, because otherwise e2fsck
won't recognise it as an intermediate htree node and consider the htree to
be corrupted.
Signed-off-by: Andreas Schlick <schlick@lavabit.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_link we need to check using EXT4_LINK_MAX, and not
EXT4_DIR_LINK_MAX(), since ext4_link() is creating hard links of
regular files, and not directories.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use EXT4_DIR_LINK_MAX so that rename() can move a directory into new
parent directory without running into the EXT4_LINK_MAX limit.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After the patch I posted last week regarding buffer head ref leaks in
no-journal mode, I looked at all the code that uses buffer heads and
searched for more potential leaks.
The patch below fixes the issues I found; these can occur even when a
journal is present.
The change to inode.c fixes a double release if
ext4_journal_get_create_access() fails.
The changes to namei.c are more complicated. add_dirent_to_buf() will
release the input buffer head EXCEPT when it returns -ENOSPC. There are
some callers of this routine that don't always do the brelse() in the event
that -ENOSPC is returned. Unfortunately, to put this fix into ext4_add_entry()
required capturing the return value of make_indexed_dir() and
add_dirent_to_buf().
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't implement per-filesystem 'extX_permission()' functions that have
to be called for every path component operation, and instead just expose
the actual ACL checking so that the VFS layer can now do it for us.
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enhance the inode allocator to take a goal inode number as a
paremeter; if it is specified, it takes precedence over Orlov or
parent directory inode allocation algorithms.
The extents migration function uses the goal inode number so that the
extent trees allocated the migration function use the correct flex_bg.
In the future, the goal inode functionality will also be used to
allocate an adjacent inode for the extended attributes.
Also, for testing purposes the goal inode number can be specified via
/sys/fs/{dev}/inode_goal. This can be useful for testing inode
allocation beyond 2^32 blocks on very large filesystems.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Instead of using a random number to determine the goal parent grop for
the Orlov top directories, use a hash of the directory name. This
allows for repeatable results when trying to benchmark filesystem
layout algorithms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The dx_map_entry structure doesn't support over 64KB block size by
current usage of its member("offs"). Because "offs" treats an offset
of copies of the ext4_dir_entry_2 structure as is. This member size is
16 bits. But real offset for over 64KB(256KB) block size needs 18
bits. However, real offset keeps 4 byte boundary, so lower 2 bits is
not used.
Therefore, we do the following to fix this limitation:
For "store":
we divide the real offset by 4 and then store this result to "offs"
member.
For "use":
we multiply "offs" member by 4 and then use this result
as real offset.
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The fs/ext4/namei.h header file had only a single function
declaration, and should have never been a standalone file. Move it
into ext4.h, where should have been from the beginning.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a mount option which allows the user to disable automatic
allocation of blocks whose allocation by delayed allocation when the
file was originally truncated or when the file is renamed over an
existing file. This feature is intended to save users from the
effects of naive application writers, but it reduces the effectiveness
of the delayed allocation code. This mount option disables this
safety feature, which may be desirable for prodcutions systems where
the risk of unclean shutdowns or unexpected system crashes is low.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When renaming a file such that a link to another inode is overwritten,
force any delay allocated blocks that to be allocated so that if the
filesystem is mounted with data=ordered, the data blocks will be
pushed out to disk along with the journal commit. Many application
programs expect this, so we do this to avoid zero length files if the
system crashes unexpectedly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_iget() returns -ESTALE if invoked on a deleted inode, in order to
report errors to NFS properly. However, in ext4_lookup(), this
-ESTALE can be propagated to userspace if the filesystem is corrupted
such that a directory entry references a deleted inode. This leads to
a misleading error message - "Stale NFS file handle" - and confusion
on the part of the admin.
The bug can be easily reproduced by creating a new filesystem, making
a link to an unused inode using debugfs, then mounting and attempting
to ls -l said link.
This patch thus changes ext4_lookup to return -EIO if it receives
-ESTALE from ext4_iget(), as ext4 does for other filesystem metadata
corruption; and also invokes the appropriate ext*_error functions when
this case is detected.
Signed-off-by: Bryan Donlan <bdonlan@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The rec_len field in the directory entry is 16 bits, so to encode
blocksizes larger than 64k becomes problematic. This patch allows us
to supprot block sizes up to 256k, by using the low 2 bits to extend
the range of rec_len to 2**18-1 (since valid rec_len sizes must be a
multiple of 4). We use the convention that a rec_len of 0 or 65535
means the filesystem block size, for compatibility with older kernels.
It's unlikely we'll see VM pages of up to 256k, but at some point we
might find that the Linux VM has been enhanced to support filesystem
block sizes > than the VM page size, at which point it might be useful
for some applications to allow very large filesystem block sizes.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use lowercase names of quota functions instead of old uppercase ones.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mingming Cao <cmm@us.ibm.com>
CC: linux-ext4@vger.kernel.org
Make sure the rec_len field in the '..' entry is sane, lest we overrun
the directory block and cause a kernel oops on a purposefully
corrupted filesystem.
Thanks to Sami Liedes for reporting this bug.
http://bugzilla.kernel.org/show_bug.cgi?id=12430
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (57 commits)
jbd2: Fix oops in jbd2_journal_init_inode() on corrupted fs
ext4: Remove "extents" mount option
block: Add Kconfig help which notes that ext4 needs CONFIG_LBD
ext4: Make printk's consistently prefixed with "EXT4-fs: "
ext4: Add sanity checks for the superblock before mounting the filesystem
ext4: Add mount option to set kjournald's I/O priority
jbd2: Submit writes to the journal using WRITE_SYNC
jbd2: Add pid and journal device name to the "kjournald2 starting" message
ext4: Add markers for better debuggability
ext4: Remove code to create the journal inode
ext4: provide function to release metadata pages under memory pressure
ext3: provide function to release metadata pages under memory pressure
add releasepage hooks to block devices which can be used by file systems
ext4: Fix s_dirty_blocks_counter if block allocation failed with nodelalloc
ext4: Init the complete page while building buddy cache
ext4: Don't allow new groups to be added during block allocation
ext4: mark the blocks/inode bitmap beyond end of group as used
ext4: Use new buffer_head flag to check uninit group bitmaps initialization
ext4: Fix the race between read_inode_bitmap() and ext4_new_inode()
ext4: code cleanup
...
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened. They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim. This bug could
cause filesystem deadlocks.
The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called. It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock. The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.
Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on
this flag in their write_begin function. Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).
This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a
random example).
[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org> [2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
untouched to the grab_cache_page_write_begin() function. That
just simplifies everybody, and may even allow future expansion of the
logic. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara