The ATU port vector contains a bit per port of the switch. The code
wrongly used it as a port number, and incremented a port counter. This
resulted in the wrong interfaces counter being incremented, and
potentially going off the end of the array of ports.
Fix this by using the source port ID for the violation, which really
is a port number.
Reported-by: Chris Healy <Chris.Healy@zii.aero>
Tested-by: Chris Healy <Chris.Healy@zii.aero>
Fixes: 65f60e4582 ("net: dsa: mv88e6xxx: Keep ATU/VTU violation statistics")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In packets that need to be decaped the internal headers
have to be checked, not the external ones.
Fixes: bdd66ac0ae ("net/mlx5e: Disallow TC offloading of unsupported match/action combinations")
Signed-off-by: Guy Shattah <sguy@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The match level computed by the driver gets to be wrong for decap
rules with wildcarded inner packet match such as:
tc filter add dev vxlan_sys_4789 protocol all parent ffff: prio 2 flower
enc_dst_ip 192.168.0.9 enc_key_id 100 enc_dst_port 4789
action tunnel_key unset
action mirred egress redirect dev eth1
The FW errs for a missing matching meta-data indicator for the outer
headers (where we do have a match), and a wrong matching meta-data
indicator for the inner headers (where we don't have a match).
Fix that by taking into account the matching on the tunnel info and
relating the match level of the encapsulated packet to the firmware
inner headers indicator in case of decap.
As for vxlan we mandate a match on the tunnel udp dst port, and in general
we practically madndate a match on the source or dest ip for any IP tunnel,
the fix was done in a minimal manner around the tunnel match parsing code.
Fixes: d708f90298 ('net/mlx5e: Get the required HW match level while parsing TC flow matches')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Slava Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
At Innova IPsec TX offload data path a special software parser metadata
is used to pass some packet attributes to the hardware, this metadata
is passed using the Ethernet control segment of a WQE (a HW descriptor)
header.
The cited commit might nullify this header, hence the metadata is lost,
this caused a significant performance drop during hw offloading
operation.
Fix by restoring the metadata at the Ethernet control segment in case
it was nullified.
Fixes: 37fdffb217 ("net/mlx5: WQ, fixes for fragmented WQ buffers API")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Use CONFIG_NF_TABLES_INET from seltests, not NF_TABLES_INET.
From Naresh Kamboju.
2) Add a test to cover masquerading and redirect case, from Florian
Westphal.
3) Two packets coming from the same socket may race to set up NAT,
ending up with different tuples and the packet losing race being
dropped. Update nf_conntrack_tuple_taken() to exercise clash
resolution for this case. From Martynas Pumputis and Florian
Westphal.
4) Unbind anonymous sets from the commit and abort path, this fixes
a splat due to double set list removal/release in case that the
transaction needs to be aborted.
5) Do not preserve original output interface for packets that are
redirected in the output chain when ip6_route_me_harder() is
called. Otherwise packets end up going not going to the loopback
device. From Eli Cooper.
6) Fix bogus splat in nft_compat with CONFIG_REFCOUNT_FULL=y, this
also simplifies the existing logic to deal with the list insertions
of the xtables extensions. From Florian Westphal.
Diffstat look rather larger than usual because of the new selftest, but
Florian and I consider that having tests soon into the tree is good to
improve coverage. If there's a different policy in this regard, please,
let me know.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When I moved the refcount to refcount_t type I missed the fact that
refcount_inc() will result in use-after-free warning with
CONFIG_REFCOUNT_FULL=y builds.
The correct fix would be to init the reference count to 1 at allocation
time, but, unfortunately we cannot do this, as we can't undo that
in case something else fails later in the batch.
So only solution I see is to special-case the 'new entry' condition
and replace refcount_inc() with a "delayed" refcount_set(1) in this case,
as done here.
The .activate callback can be removed to simplify things, we only
need to make sure that deactivate() decrements/unlinks the entry
from the list at end of transaction phase (commit or abort).
Fixes: 12c44aba66 ("netfilter: nft_compat: use refcnt_t type for nft_xt reference count")
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 508b09046c ("netfilter: ipv6: Preserve link scope traffic
original oif") made ip6_route_me_harder() keep the original oif for
link-local and multicast packets. However, it also affected packets
for the loopback address because it used rt6_need_strict().
REDIRECT rules in the OUTPUT chain rewrite the destination to loopback
address; thus its oif should not be preserved. This commit fixes the bug
that redirected local packets are being dropped. Actually the packet was
not exactly dropped; Instead it was sent out to the original oif rather
than lo. When a packet with daddr ::1 is sent to the router, it is
effectively dropped.
Fixes: 508b09046c ("netfilter: ipv6: Preserve link scope traffic original oif")
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The unbalance of master's promiscuity or allmulti will happen after ifdown
and ifup a slave interface which is in a bridge.
When we ifdown a slave interface , both the 'dsa_slave_close' and
'dsa_slave_change_rx_flags' will clear the master's flags. The flags
of master will be decrease twice.
In the other hand, if we ifup the slave interface again, since the
slave's flags were cleared the 'dsa_slave_open' won't set the master's
flag, only 'dsa_slave_change_rx_flags' that triggered by 'br_add_if'
will set the master's flags. The flags of master is increase once.
Only propagating flag changes when a slave interface is up makes
sure this does not happen. The 'vlan_dev_change_rx_flags' had the
same problem and was fixed, and changes here follows that fix.
Fixes: 91da11f870 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Rundong Ge <rdong.ge@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann says:
====================
s390/qeth: fixes 2019-02-04
please apply the following four fixes to -net.
Patch 1 takes care of a common resource leak in various error paths, while the
second patch fixes a misordered kfree when cleaning up after an error.
The other two patches ensure that there's no stale work dangling on workqueues
when the qeth device has already been offlined and/or removed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Work for Bridgeport events is currently placed on a driver-wide
workqueue. If the card is removed and freed while any such work is still
active, this causes a use-after-free.
So put the events on a per-card queue, where we can control their
lifetime. As we also don't want stale events to last beyond an
offline & online cycle, flush this queue when setting the card offline.
Fixes: b4d72c08b3 ("qeth: bridgeport support - basic control")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A card's close_dev work is scheduled on a driver-wide workqueue. If the
card is removed and freed while the work is still active, this causes a
use-after-free.
So make sure that the work is completed before freeing the card.
Fixes: 0f54761d16 ("qeth: Support VEPA mode")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error path in qeth_alloc_qdio_buffers() that takes care of
cleaning up the Output Queues is buggy. It first frees the queue, but
then calls qeth_clear_outq_buffers() with that very queue struct.
Make the call to qeth_clear_outq_buffers() part of the free action
(in the correct order), and while at it fix the naming of the helper.
Fixes: 0da9581ddb ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever we fail before/while starting an IO, make sure to release the
IO buffer. Usually qeth_irq() would do this for us, but if the IO
doesn't even start we obviously won't get an interrupt for it either.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In fl_change(), when adding a new rule (i.e. fold == NULL), a driver may
reject the new rule, for example due to resource exhaustion. By that
point, the new rule was already assigned a mask, and it was added to
that mask's hash table. The clean-up path that's invoked as a result of
the rejection however neglects to undo the hash table addition, and
proceeds to free the new rule, thus leaving a dangling pointer in the
hash table.
Fix by removing fnew from the mask's hash table before it is freed.
Fixes: 35cc3cefc4 ("net/sched: cls_flower: Reject duplicated rules also under skip_sw")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
First set of small, but importnat, fixes for 5.0.
iwlwifi
* fix a build regression introduced in 5.0-rc1
wlcore
* fix a firmware regression from v4.18-rc1
mt76x0
* fix for configuring tx power from user space
ath10k
* fix wcn3990 regression from v4.20-rc1
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcWDsEAAoJEG4XJFUm622bSGsIAKevgvjWQkE7ITGfVuVNxRr9
B1pLgpOrQpVJtInbIS/sGpRKlcGn+3rE47KWzsl/1osGroQGcj5GV+hfGsvGkLwD
rzbYnAWA4VKP9yD/RDCho9v8kjAQYdfIArE7zpm14De0oXJHEn3C94Hxd90hn6CX
BhX4iZONcpIaAnggLj5aSIOo8+UFoE9BlGLFN0uNGQT2V0X/GjvZSfTAGsaof09Q
vSij06GNAoPF4g4ekJA0sJk0T3hJ8NNklrArKii7SE841j8Y1UaDHtHd/X5eUyLa
tB2pDvQgoCO6O5stZWtq1fr/qPBFthyE1TiMla5WgW+8l4QYaF14smNxkW5Kamg=
=5tr0
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2019-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.0
First set of small, but importnat, fixes for 5.0.
iwlwifi
* fix a build regression introduced in 5.0-rc1
wlcore
* fix a firmware regression from v4.18-rc1
mt76x0
* fix for configuring tx power from user space
ath10k
* fix wcn3990 regression from v4.20-rc1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun says:
====================
net/smc: fixes 2019-02-04
here are more fixes in the smc code for the net tree:
Patch 1 fixes an IB-related problem with SMCR.
Patch 2 fixes a cursor problem for one-way traffic.
Patch 3 fixes a problem with RMB-reusage.
Patch 4 fixes a closing issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If some kind of closing is received from the peer while still in
state SMC_INIT, it means the peer has had an active connection and
closed the socket quickly before listen_work finished. This should
not result in a shortcut from state SMC_INIT to state SMC_CLOSED.
This patch adds the socket to the accept queue in state
SMC_APPCLOSEWAIT1. The socket reaches state SMC_CLOSED once being
accepted and closed with smc_release().
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once RMBs are flagged as unused they are candidates for reuse.
Thus the LLC DELETE RKEY operaton should be made before flagging
the RMB as unused.
Fixes: c7674c001b ("net/smc: unregister rkeys of unused buffer")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some scenarios a separate consumer cursor update is necessary.
The decision is made in smc_tx_consumer_cursor_update(). The
sender_free computation could be wrong:
The rx confirmed cursor is always smaller than or equal to the
rx producer cursor. The parameters in the smc_curs_diff() call
have to be exchanged, otherwise sender_free might even be negative.
And if more data arrives local_rx_ctrl.prod might be updated, enabling
a cursor difference between local_rx_ctrl.prod and rx confirmed cursor
larger than the RMB size. This case is not covered by smc_curs_diff().
Thus function smc_curs_diff_large() is introduced here.
If a recvmsg() is processed in parallel, local_tx_ctrl.cons might
change during smc_cdc_msg_send. Make sure rx_curs_confirmed is updated
with the actually sent local_tx_ctrl.cons value.
Fixes: e82f2e31f5 ("net/smc: optimize consumer cursor updates")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The work requests for rdma writes are built in local variables within
function smc_tx_rdma_write(). This violates the rule that the work
request storage has to stay till the work request is confirmed by
a completion queue response.
This patch introduces preallocated memory for these work requests.
The storage is allocated, once a link (and thus a queue pair) is
established.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During sendmsg() a cloned skb is saved via dp83640_txtstamp() in
->tx_queue. After the NIC sends this packet, the PHY will reply with a
timestamp for that TX packet. If the cable is pulled at the right time I
don't see that packet. It might gets flushed as part of queue shutdown
on NIC's side.
Once the link is up again then after the next sendmsg() we enqueue
another skb in dp83640_txtstamp() and have two on the list. Then the PHY
will send a reply and decode_txts() attaches it to the first skb on the
list.
No crash occurs since refcounting works but we are one packet behind.
linuxptp/ptp4l usually closes the socket and opens a new one (in such a
timeout case) so those "stale" replies never get there. However it does
not resume normal operation anymore.
Purge old skbs in decode_txts().
Fixes: cb646e2b02 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anonymous sets that are bound to rules from the same transaction trigger
a kernel splat from the abort path due to double set list removal and
double free.
This patch updates the logic to search for the transaction that is
responsible for creating the set and disable the set list removal and
release, given the rule is now responsible for this. Lookup is reverse
since the transaction that adds the set is likely to be at the tail of
the list.
Moreover, this patch adds the unbind step to deliver the event from the
commit path. This should not be done from the worker thread, since we
have no guarantees of in-order delivery to the listener.
This patch removes the assumption that both activate and deactivate
callbacks need to be provided.
Fixes: cd5125d8f5 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase")
Reported-by: Mikhail Morfikov <mmorfikov@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It is possible that two concurrent packets originating from the same
socket of a connection-less protocol (e.g. UDP) can end up having
different IP_CT_DIR_REPLY tuples which results in one of the packets
being dropped.
To illustrate this, consider the following simplified scenario:
1. Packet A and B are sent at the same time from two different threads
by same UDP socket. No matching conntrack entry exists yet.
Both packets cause allocation of a new conntrack entry.
2. get_unique_tuple gets called for A. No clashing entry found.
conntrack entry for A is added to main conntrack table.
3. get_unique_tuple is called for B and will find that the reply
tuple of B is already taken by A.
It will allocate a new UDP source port for B to resolve the clash.
4. conntrack entry for B cannot be added to main conntrack table
because its ORIGINAL direction is clashing with A and the REPLY
directions of A and B are not the same anymore due to UDP source
port reallocation done in step 3.
This patch modifies nf_conntrack_tuple_taken so it doesn't consider
colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal.
[ Florian: simplify patch to not use .allow_clash setting
and always ignore identical flows ]
Signed-off-by: Martynas Pumputis <martynas@weave.works>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In selftests the config fragment for netfilter was added as
NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Previously virtnet_xdp_xmit() did not account for device tx counters,
which caused confusions.
To be consistent with SKBs, account them on freeing xdp_frames.
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when using stream reconfig to add out streams, stream->out
will get re-allocated, and all old streams' information will
be copied to the new ones and the old ones will be freed.
So without stream->out_curr updated, next time when trying to
send from stream->out_curr stream, a panic would be caused.
This patch is to check and update stream->out_curr when
allocating stream_out.
v1->v2:
- define fa_index() to get elem index from stream->out_curr.
v2->v3:
- repost with no change.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: Ying Xu <yinxu@redhat.com>
Reported-by: syzbot+e33a3a138267ca119c7d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create an entry for Redpine wireless driver and add Amit and myself as
maintainers.
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Broadcom STB chips support a deep sleep mode where all register
contents are lost. Because we were stashing the MagicPacket password
into some of these registers a suspend into that deep sleep then a
resumption would not lead to being able to wake-up from MagicPacket with
password again.
Fix this by keeping a software copy of the password and program it
during suspend.
Fixes: 83e82f4c70 ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Garzarella says:
====================
vsock/virtio: fix issues on device hot-unplug
These patches try to handle the hot-unplug of vsock virtio transport device in
a proper way.
Maybe move the vsock_core_init()/vsock_core_exit() functions in the module_init
and module_exit of vsock_virtio_transport module can't be the best way, but the
architecture of vsock_core forces us to this approach for now.
The vsock_core proto_ops expect a valid pointer to the transport device, so we
can't call vsock_core_exit() until there are open sockets.
v2 -> v3:
- Rebased on master
v1 -> v2:
- Fixed commit message of patch 1.
- Added Reviewed-by, Acked-by tags by Stefan
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the virtio transport device disappear, we should reset all
connected sockets in order to inform the users.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
virtio_vsock_remove() invokes the vsock_core_exit() also if there
are opened sockets for the AF_VSOCK protocol family. In this way
the vsock "transport" pointer is set to NULL, triggering the
kernel panic at the first socket activity.
This patch move the vsock_core_init()/vsock_core_exit() in the
virtio_vsock respectively in module_init and module_exit functions,
that cannot be invoked until there are open sockets.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699
Reported-by: Yan Fu <yafu@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 6623c0fba1.
The original diagnosis was incorrect: it appears that the NIC had
PHY polling mode enabled, which meant that it overwrote the PHYs
advertisement register during negotiation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2019-01-31
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) disable preemption in sender side of socket filters, from Alexei.
2) fix two potential deadlocks in syscall bpf lookup and prog_register,
from Martin and Alexei.
3) fix BTF to allow typedef on func_proto, from Yonghong.
4) two bpftool fixes, from Jiri and Paolo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun says:
====================
net/smc: fixes 2019-01-30
here are some fixes in different areas of the smc code for the net
tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not use pend->idx as index for the arrays because its value is
located in the cleared area. Use the existing local variable instead.
Without this fix the wrong area might be cleared.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device field of the IB event structure does not always point to the
SMC IB device. Load the pointer from the qp_context which is always
provided to smc_ib_qp_event_handler() in the priv field. And for qp
events the affected port is given in the qp structure of the ibevent,
derive it from there.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Call smc_cdc_msg_send() under the connection send_lock to make sure all
send operations for one connection are serialized.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_cdc_get_free_slot() might wait for free transfer buffers when using
SMC-R. This wait should not be done under the send_lock, which is a
spin_lock. This fixes a cpu loop in parallel threads waiting for the
send_lock.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a socket was connected and is now shut down for read, return 0 to
indicate end of data in recvmsg and splice_read (like TCP) and do not
return ENOTCONN. This behavior is required by the socket api.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When there is no more send buffer space and at least 1 byte was already
sent then return to user space. The wait is only done when no data was
sent by the sendmsg() call.
This fixes smc_tx_sendmsg() which tried to always send all user data and
started to wait for free send buffer space when needed. During this wait
the user space program was blocked in the sendmsg() call and hence not
able to receive incoming data. When both sides were in such a situation
then the connection stalled forever.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To prevent races between smc_lgr_terminate() and smc_conn_free() add an
extra check of the lgr field before accessing it, and cancel a delayed
free_work when a new smc connection is created.
This fixes the problem that free_work cleared the lgr variable but
smc_lgr_terminate() or smc_conn_free() still access it in parallel.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, users can only send pnetids with a maximum length of 15 bytes
over the SMC netlink interface although the maximum pnetid length is 16
bytes. This patch changes the SMC netlink policy to accept 16 byte
pnetids.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Comparing an int to a size, which is unsigned, causes the int to become
unsigned, giving the wrong result. kernel_sendmsg can return a negative
error code.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of IPv6 pkts, ipv4_csum_ok is 0. Because of this, driver does
not set skb->ip_summed. So IPv6 rx checksum is not offloaded.
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In sctp_sendmesg(), when walking the list of endpoint associations, the
association can be dropped from the list, making the list corrupt.
Properly handle this by using list_for_each_entry_safe()
Fixes: 4910280503 ("sctp: add support for snd flag SCTP_SENDALL process in sendmsg")
Reported-by: Secunia Research <vuln@secunia.com>
Tested-by: Secunia Research <vuln@secunia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Avoid WARN to report incorrect configuration, by Sven Eckelmann
- Fix mac header position setting, by Sven Eckelmann
- Fix releasing station statistics, by Felix Fietkau
-----BEGIN PGP SIGNATURE-----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=M/+V
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20190201' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Avoid WARN to report incorrect configuration, by Sven Eckelmann
- Fix mac header position setting, by Sven Eckelmann
- Fix releasing station statistics, by Felix Fietkau
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn