Commit Graph

436 Commits

Author SHA1 Message Date
Grant Likely 597b9d1e44 drivercore: Add of_match_table to the common device drivers
OF-style matching can be available to any device, on any type of bus.
This patch allows any driver to provide an OF match table when CONFIG_OF
is enabled so that drivers can be bound against devices described in
the device tree.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-22 00:10:40 -06:00
Grant Likely cb6dc512b7 arch/powerpc: Move dma_mask from of_device into pdev_archdata
By moving dma_mask into pdev_archdata, and adding archdata to
struct of_device, it makes it possible to substitute of_device
with struct platform_device, which is a stepping stone to
removing the of_platform bus entirely.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22 00:10:40 -06:00
Linus Torvalds 79c4581262 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (92 commits)
  powerpc: Remove unused 'protect4gb' boot parameter
  powerpc: Build-in e1000e for pseries & ppc64_defconfig
  powerpc/pseries: Make request_ras_irqs() available to other pseries code
  powerpc/numa: Use ibm,architecture-vec-5 to detect form 1 affinity
  powerpc/numa: Set a smaller value for RECLAIM_DISTANCE to enable zone reclaim
  powerpc: Use smt_snooze_delay=-1 to always busy loop
  powerpc: Remove check of ibm,smt-snooze-delay OF property
  powerpc/kdump: Fix race in kdump shutdown
  powerpc/kexec: Fix race in kexec shutdown
  powerpc/kexec: Speedup kexec hash PTE tear down
  powerpc/pseries: Add hcall to read 4 ptes at a time in real mode
  powerpc: Use more accurate limit for first segment memory allocations
  powerpc/kdump: Use chip->shutdown to disable IRQs
  powerpc/kdump: CPUs assume the context of the oopsing CPU
  powerpc/crashdump: Do not fail on NULL pointer dereferencing
  powerpc/eeh: Fix oops when probing in early boot
  powerpc/pci: Check devices status property when scanning OF tree
  powerpc/vio: Switch VIO Bus PM to use generic helpers
  powerpc: Avoid bad relocations in iSeries code
  powerpc: Use common cpu_die (fixes SMP+SUSPEND build)
  ...
2010-05-21 11:17:05 -07:00
Grant Likely 61c7a080a5 of: Always use 'struct device.of_node' to get device node pointer.
The following structure elements duplicate the information in
'struct device.of_node' and so are being eliminated.  This patch
makes all readers of these elements use device.of_node instead.

(struct of_device *)->node
(struct dev_archdata *)->prom_node (sparc)
(struct dev_archdata *)->of_node (powerpc & microblaze)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-18 16:10:44 -06:00
Arnd Bergmann 55929332c9 drivers: Push down BKL into various drivers
These are the last remaining device drivers using
the ->ioctl file operation in the drivers directory
(except from v4l drivers).

[fweisbec: drop i8k pushdown as it has been done from
procfs pushdown branch already]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-17 05:27:41 +02:00
Benjamin Herrenschmidt 1ed31d6db9 Merge commit 'origin/master' into next 2010-05-07 11:29:25 +10:00
Jiri Kosina 6c9468e9eb Merge branch 'master' into for-next 2010-04-23 02:08:44 +02:00
Wolfram Sang 12765517d9 device_attributes: add sysfs_attr_init() for dynamic attributes
Made necessary by 6992f53349 ("sysfs: Use
one lockdep class per sysfs attribute").

Prevents further "key xxx not in .data" bug-reports.  Although some
attributes could probably be converted to static ones, this is left for
people having hardware to test.

Found by this semantic patch:

@ init @
type T;
identifier A;
@@

        T {
                ...
                struct device_attribute A;
                ...
        };

@ main extends init @
expression E;
statement S;
identifier err;
T *name;
@@

        ... when != sysfs_attr_init(&name->A.attr);
(
+       sysfs_attr_init(&name->A.attr);
        if (device_create_file(E, &name->A))
                S
|
+       sysfs_attr_init(&name->A.attr);
        err = device_create_file(E, &name->A);
)

While reviewing, I put the initialization to apropriate places.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg KH <gregkh@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Mike Isely <isely@pobox.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:03 -07:00
Wolfram Sang 7429b3842c powerpc/pmac: Fix dangling pointers
Fix I2C-drivers which missed setting clientdata to NULL before freeing the
structure it points to. Also fix drivers which do this _after_ the structure
was freed already.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Colin Leroy <colin@colino.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:46 +10:00
Julia Lawall 86e4754ac8 powerpc/pmac: Add missing unlocks in error path
In some error handling cases the lock is not unlocked.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E1;
identifier f;
@@

f (...) { <+...
* spin_lock_irqsave (E1,...);
... when != E1
* return ...;
...+> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:44 +10:00
Julia Lawall ab30f78c0a powerpc/pmac/windfarm: Correct potential double free
The conditionals were testing different values, but then all freeing the
same one, which could result in a double free.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,e;
identifier f;
iterator I;
statement S;
@@

*kfree(x);
... when != &x
    when != x = e
    when != I(x,...) S
*x
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:40 +10:00
d binderman 6d1bdd2afb powerpc/pmac/windfarm: Don't test pointers before kfree()
Fix minor nits found by cppcheck

[./macintosh/windfarm_pm81.c:760]: (style) Redundant condition. It is safe to deallocate a NULL pointer
[./macintosh/windfarm_pm81.c:762]: (style) Redundant condition. It is safe to deallocate a NULL pointer

Signed-off-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 18:00:38 +10:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Matthew Garrett a19a6ee6ca backlight: Allow properties to be passed at registration
Values such as max_brightness should be set before backlights are
registered, but the current API doesn't allow that. Add a parameter to
backlight_device_register and update drivers to ensure that they
set this correctly.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-16 19:47:54 +00:00
Thomas Weber 8839316121 Fix typos in comments
[Ss]ytem => [Ss]ystem
udpate => update
paramters => parameters
orginal => original

Signed-off-by: Thomas Weber <swirl@gmx.li>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-16 11:47:56 +01:00
Josh Boyer de0b632ba0 powerpc: Fix G5 thermal shutdown
This changes the thresholds for the liquid cooled G5 thermal
shutdown mechanism to prevent an errant shutdown with some
models.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-09 11:55:27 +11:00
Johannes Berg b35c74dab6 sysfs: windfarm: init sysfs attributes
This is required for lockdep.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:51 -08:00
Linus Torvalds 8724fdb53d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (62 commits)
  Input: atkbd - release previously reserved keycodes 248 - 254
  Input: add KEY_WPS_BUTTON definition
  Input: ads7846 - add regulator support
  Input: winbond-cir - fix suspend/resume
  Input: gamecon - use pr_err() and friends
  Input: gamecon - constify some of the setup structures
  Input: gamecon - simplify pad type handling
  Input: gamecon - simplify coordinate calculation for PSX
  Input: gamecon - fix some formatting issues
  Input: gamecon - add rumble support for N64 pads
  Input: wacom - add device type to device name string
  Input: s3c24xx_ts - report touch only when stylus is down
  Input: s3c24xx_ts - re-enable IRQ on resume
  Input: wacom - constify product features data
  Input: wacom - use per-device instance of wacom_features
  Input: sh_keysc - enable building on SH-Mobile ARM
  Input: wacom - get features from driver info
  Input: rotary-encoder - set gpio direction for each requested gpio
  Input: sh_keysc - update the driver with mode 6
  Input: sh_keysc - switch to using bitmaps
  ...
2010-03-01 10:38:09 -08:00
Linus Torvalds 847f9c606c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (24 commits)
  m68k: Define sigcontext ABI of ColdFire
  m68knommu: NPTL support for uClinux
  m68k: Add NPTL support
  m68k: Eliminate unused variable in page_to_phys()
  m68k: Switch to generic siginfo layout
  macfb: fix 24-bit visual and stuff
  macfb: cleanup
  fbdev: add some missing mac modes
  mac68k: start CUDA early
  valkyriefb: various fixes
  fbdev: mac_var_to_mode() fix
  mac68k: move macsonic and macmace platform devices
  mac68k: move mac_esp platform device
  mac68k: replace mac68k SCC code with platform device
  pmac-zilog: add platform driver
  pmac-zilog: cleanup
  mac68k: rework SWIM platform device
  mac68k: cleanup
  ataflop: Killl warning about unused variable flags
  m68k: Use DIV_ROUND_CLOSEST
  ...
2010-02-27 16:22:47 -08:00
Finn Thain 18814ee846 mac68k: start CUDA early
The valkyriefb driver needs the CUDA to work in order to set the video
mode at boot. So initialise the device earlier, and bring the m68k code
closer to the powermac code.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27 18:31:13 +01:00
Benjamin Herrenschmidt 874f2f997d Merge commit 'origin/master' into next
Manual merge of:
	drivers/char/hvc_console.c
	drivers/char/hvc_console.h
2010-02-26 14:41:00 +11:00
Grant Likely 71a157e8ed of: add 'of_' prefix to machine_is_compatible()
machine is compatible is an OF-specific call.  It should have
the of_ prefix to protect the global namespace.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-09 08:33:00 -07:00
Frans Pop 8354be9c10 powerpc: Remove trailing space in messages
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: linuxppc-dev@ozlabs.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-09 13:56:23 +11:00
Jean Delvare 33a470f6d5 macintosh/therm_adt746x: Fix sysfs attributes lifetime
Looking at drivers/macintosh/therm_adt746x.c, the sysfs files are
created in thermostat_init() and removed in thermostat_exit(), which
are the driver's init and exit functions. These files are backed-up by
a per-device structure, so it looks like the wrong thing to do: the
sysfs files have a lifetime longer than the data structure that is
backing it up.

I think that sysfs files creation should be moved to the end of
probe_thermostat() and sysfs files removal should be moved to the
beginning of remove_thermostat().

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Colin Leroy <colin@colino.net>
Cc: stable@kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-03 17:39:49 +11:00
Dmitry Torokhov 429722e19d Input: Mac button emulation - allow compiling as a module
Not all systems require Mac-style button emulation, however distributions
enable it by default so it is readily available. Allow compiling it as a
module so it can be loaded only on systems that actually require it.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-30 01:48:03 -08:00
Dmitry Torokhov 99b089c3c3 Input: Mac button emulation - implement as an input filter
Current implementation of Mac mouse button emulation plugs into legacy
keyboard driver, converts certain keys into button events on a separate
device, and suppresses the real events from reaching tty. This worked
well enough until user space started using evdev which was completely
unaware of this arrangement and kept sending original key presses to
its users. Change the implementation to use newly added input filter
framework so that original key presses are not transmitted to any
handlers.

As a bonus remove SYSCTL dependencies from the code and use Kconfig
instead; also do not create the emulated mouse device until user
activates emulation.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-30 01:47:49 -08:00
Márton Németh 46759a7c13 powerpc/macintosh: Make Open Firmware device id constant
The match_table field of the struct of_device_id is constant in <linux/of_platform.h>
so it is worth to make the initialization data also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:04 +11:00
Linus Torvalds 09cea96caa Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits)
  powerpc: Fix usage of 64-bit instruction in 32-bit altivec code
  MAINTAINERS: Add PowerPC patterns
  powerpc/pseries: Track previous CPPR values to correctly EOI interrupts
  powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP
  powerpc: Make "intspec" pointers in irq_host->xlate() const
  powerpc/8xx: DTLB Miss cleanup
  powerpc/8xx: Remove DIRTY pte handling in DTLB Error.
  powerpc/8xx: Start using dcbX instructions in various copy routines
  powerpc/8xx: Restore _PAGE_WRITETHRU
  powerpc/8xx: Add missing Guarded setting in DTLB Error.
  powerpc/8xx: Fixup DAR from buggy dcbX instructions.
  powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions.
  powerpc/8xx: Update TLB asm so it behaves as linux mm expects.
  powerpc/8xx: Invalidate non present TLBs
  powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate
  pseries/pseries: Add code to online/offline CPUs of a DLPAR node
  powerpc: stop_this_cpu: remove the cpu from the online map.
  powerpc/pseries: Add kernel based CPU DLPAR handling
  sysfs/cpu: Add probe/release files
  powerpc/pseries: Kernel DLPAR Infrastructure
  ...
2009-12-12 14:27:24 -08:00
Linus Torvalds 4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Linus Torvalds 18821b0408 Merge branch 'bkl-drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'bkl-drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  agp: Remove the BKL from agp_open
  inifiband: Remove BKL from ipath_open()
  mips: Remove BKL from tb0219
  drivers: Remove BKL from scx200_gpio
  drivers: Remove BKL from pc8736x_gpio
  parisc: Remove BKL from eisa_eeprom
  rtc: Remove BKL from efirtc
  input: Remove BKL from hp_sdc_rtc
  hw_random: Remove BKL from core
  macintosh: Remove BKL from ans-lcd
  nvram: Drop the bkl from non-generic nvram_llseek()
  nvram: Drop the bkl from nvram_llseek()
  mem_class: Drop the bkl from memory_open()
  spi: Remove BKL from spidev_open
  drivers: Remove BKL from cs5535_gpio
  drivers: Remove BKL from misc_open
2009-12-09 08:07:38 -08:00
Benjamin Herrenschmidt bcd6acd51f Merge commit 'origin/master' into next
Conflicts:
	include/linux/kvm.h
2009-12-09 17:14:38 +11:00
Darrick J. Wong 1496e89ae2 powerpc/therm_adt746x: Record pwm invert bit at module load time]
In commit 0512a9a8e2, we unilaterally zero the
"pwm invert" bit in the fan behavior configuration register.  On my PowerBook
G4, this results in the fans going to full speed at low temperature and
shutting off at high temperature because the pwm invert bit is supposed to be
set.

Therefore, record the pwm invert bit at driver load time, and write the bit
into the fan behavior control register.  This restores correct behavior on my
PBG4 and should work around the bit being set to the wrong value after
suspend/resume (which is what the original patch was trying to fix).  It also
fixes a minor omission where the pwm invert bit correction is NOT performed
when switching into automatic mode.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
CC: <stable@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09 17:09:31 +11:00
Benjamin Herrenschmidt d58b0c39e3 powerpc/macio: Rework hotplug media bay support
The hotplug mediabay has tendrils deep into drivers/ide code
which makes a libata port reather difficult. In addition it's
ugly and could be done better.

This reworks the interface between the mediabay and the rest
of the world so that:

   - Any macio_driver can now have a mediabay_event callback
which will be called when that driver sits on a mediabay and
it's been either plugged or unplugged. The device type is
passed as an argument. We can now move all the IDE cruft
into the IDE driver itself

   - A check_media_bay() function can be used to take a peek
at the type of device currently in the bay if any, a cleaner
variant of the previous function with the same name.

   - A pair of lock/unlock functions are exposed to allow the
IDE driver to block the hotplug callbacks during the initial
setup and probing of the bay in order to avoid nasty race
conditions.

   - The mediabay code no longer needs to spin on the status
register of the IDE interface when it detects an IDE device,
this is done just fine by the IDE code itself

Overall, less code, simpler, and allows for another driver
than our old drivers/ide based one.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09 17:09:14 +11:00
Benjamin Herrenschmidt 128b4a0ef7 powerpc/macio: Add dma_parms support to macio
This adds dma_parms to macio devices and initializes them with
default values. This will allow pata_macio to setup the appropriate
max segment size for the block layer.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-08 16:02:52 +11:00
Benjamin Herrenschmidt 7fb19ea054 powerpc/macio: Add devres support to macio_device
This adds some basic devres support. When enabled via macio_enable_devres()
resources requested by drivers will be automatically released.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-08 16:02:51 +11:00
Bolko Maass 529586dc39 powerpc/windfarm: Add detection for second cpu pump
Windfarm SMU control is explicitly missing support for a second CPU pump in G5 PowerMacs. Such machines actually exist  (specifically Quads with a second pump), so this patch adds detection for it.

Signed-off by: Bolko Maass <bmaass@math.uni-bremen.de>
CC: <stable@kernel.org>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-08 16:01:10 +11:00
Alexey Dobriyan 9d2f7342d0 powerpc/via-pmu: Convert to proc_fops/seq_file
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-08 15:59:34 +11:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Thomas Gleixner 0b048c7a1d macintosh: Remove BKL from nvram driver
Drop the bkl from nvram_llseek() as it obviously protects nothing. The
file offset is safe in essence.

The ioctl can be converted to unlocked_ioctl because it just calls
pmac_get_partition() which reads a value from an array which was
initialized at early boot time. No need for serialization.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-24 14:31:27 +11:00
Eric W. Biederman 6d4561110a sysctl: Drop & in front of every proc_handler.
For consistency drop & in front of every proc_handler.  Explicity
taking the address is unnecessary and it prevents optimizations
like stubbing the proc_handlers to NULL.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-18 08:37:40 -08:00
Eric W. Biederman 894d249115 sysctl drivers: Remove dead binary sysctl support
Now that sys_sysctl is a wrapper around /proc/sys all of
the binary sysctl support elsewhere in the tree is
dead code.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Corey Minyard <minyard@acm.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Neil Brown <neilb@suse.de>
Cc: "James E.J. Bottomley" <James.Bottomley@suse.de>
Acked-by: Clemens Ladisch <clemens@ladisch.de> for drivers/char/hpet.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-12 02:04:58 -08:00
Jean Delvare 99ca177ae4 powerpc/therm_adt746x: Don't access non-existing register
The ADT746x don't have any register at sub-address 0, so better use an
existing register for the initial test read.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Colin Leroy <colin@colino.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-30 17:21:32 +11:00
Thomas Gleixner 95fdac7372 macintosh: Remove BKL from ans-lcd
The ans-lcd driver got the cycle_kernel_lock() in anslcd_open() from
the BKL pushdown and it still uses the locked ioctl.

The BKL serialization in this driver is more than obscure and
definitely does not cover all possible corner cases. Protect the
access to the hardware with a local mutex and get rid of BKL and
locked ioctl.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20091010153349.966159859@linutronix.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-14 17:36:50 +02:00
Benjamin Herrenschmidt 11a50873ef powerpc/pmac: Fix issues with sleep on some powerbooks
Since the change of how interrupts are disabled during suspend,
certain PowerBook models started exhibiting various issues during
suspend or resume from sleep.

I finally tracked it down to the code that runs various "platform"
functions (kind of little scripts extracted from the device-tree),
which uses our i2c and PMU drivers expecting interrutps to work,
and at a time where with the new scheme, they have been disabled.

This causes timeouts internally which for some reason results in
the PMU being unable to see the trackpad, among other issues, really
it depends on the machine. Most of the time, we fail to properly adjust
some clocks for suspend/resume so the results are not always
predictable.

This patch fixes it by using IRQF_TIMER for both the PMU and the I2C
interrupts. I prefer doing it this way than moving the call sites since
I really want those platform functions to still be called after all
drivers (and before sysdevs).

We also do a slight cleanup to via-pmu.c driver to make sure the
ADB autopoll mask is handled correctly when doing bus resets

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-14 16:58:35 +11:00
Jean Delvare 6f6b35e133 macintosh: Don't assume i2c device probing always succeeds
If i2c device probing fails, then there is no driver to dereference
after calling i2c_new_device(). Stop assuming that probing will always
succeed, to avoid NULL pointer dereferences. We have an easier access
to the driver anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Tim Shepard <shep@alum.mit.edu>
Cc: Colin Leroy <colin@colino.net>
2009-10-04 22:53:46 +02:00
Linus Torvalds cce1d9f232 Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: move leds-clevo-mail's probe function to .devinit.text
  leds: Fix indentation in LEDS_LP3944 Kconfig entry
  leds: Fix LED names 
  leds: Fix leds-pca9532 whitespace issues
  leds: fix coding style in worker thread code for ledtrig-gpio.
  leds: gpio-leds: fix typographics fault
  leds: Add WM831x status LED driver
2009-09-26 10:50:47 -07:00
Joe Perches a419aef8b8 trivial: remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:58 +02:00
Linus Torvalds 723e9db7a4 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits)
  powerpc/nvram: Enable use Generic NVRAM driver for different size chips
  powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline
  powerpc/ps3: Workaround for flash memory I/O error
  powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead
  powerpc/perf_counters: Reduce stack usage of power_check_constraints
  powerpc: Fix bug where perf_counters breaks oprofile
  powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops
  powerpc/irq: Improve nanodoc
  powerpc: Fix some late PowerMac G5 with PCIe ATI graphics
  powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT
  powerpc/book3e: Add missing page sizes
  powerpc/pseries: Fix to handle slb resize across migration
  powerpc/powermac: Thermal control turns system off too eagerly
  powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()
  powerpc/405ex: support cuImage via included dtb
  powerpc/405ex: provide necessary fixup function to support cuImage
  powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC
  powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.
  powerpc/44x: Update Arches defconfig
  powerpc/44x: Update Arches dts
  ...

Fix up conflicts in drivers/char/agp/uninorth-agp.c
2009-09-15 09:51:09 -07:00
Olaf Hering db3f520738 leds: Fix LED names
This is needed to get kde-powersave to work properly on some g4
powerbooks.

From: Olaf Hering <olh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-07 14:37:27 +01:00
Lyonel Vincent b8e4a7dae5 powerpc/powermac: Thermal control turns system off too eagerly
On certain PowerMacs, a module (therm_windtunnel) controls various
thermal settings (it can report CPU/case temperature, change speed
of internal fans, etc.)

By default, the hardware thermal control has a temperature limit to
protect the computer from damages (the default limit seems to be 80°C)
but therm_windtunnel.c reduces it to an anormaly low value (65°C),
which means that he computer will shut down randomly when hit by direct
sun light or during summer (summer in France can be quite hot), actually
possibly losing data instead of protecting it.

The overheat limit in therm_windtunnel.c:253-254 should be set to 75°C
and 70°C instead of 65°C and 60°C respectively.

From: Lyonel Vincent <lyonel@ezix.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-02 15:46:00 +10:00
Roel Kluin dac9ff79a8 m68k: count can reach 51, not 50
With while (count++ < 50) { ...  } count can reach 51, not 50, so we
shouldn't give an error message on a count of 50.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-08-26 23:14:49 +02:00
roel kluin fb2881a713 powerpc/macio: Don't the address of an array element before boundchecking
Check whether index is within bounds before grabbing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:29:26 +10:00
Benjamin Herrenschmidt 3514141aed powerpc/pmac: Fix DMA ops for MacIO devices
The macio_dev's created to map devices inside the MacIO ASICs
don't have proper dma_ops. This causes crashes on some machines
since the SCSI code calls dma_map_* on our behalf using the
device we hang from.

This fixes it by copying the parent PCI device dma_ops into
the macio_dev when creating it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26 14:37:25 +10:00
Linus Torvalds 4858704da7 Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  therm_windtunnel: Convert to a new-style i2c driver
  therm_adt746x: Convert to a new-style i2c driver
  windfarm: Convert to new-style i2c drivers
  therm_pm72: Convert to a new-style i2c driver
  i2c-viapro: Add new PCI device ID for VX855
  i2c/chips: Move max6875 to drivers/misc/eeprom
  i2c: Do not give adapters a default parent
  i2c: Do not probe for TV chips on Voodoo3 adapters
  i2c: Retry automatically on arbitration loss
  i2c: Remove void casts
2009-06-16 11:29:17 -07:00
Jean Delvare 036533e232 therm_windtunnel: Convert to a new-style i2c driver
The legacy i2c binding model is going away soon, so convert the ppc
therm_windtunnel driver to the new model or it will break.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
2009-06-15 18:01:52 +02:00
Jean Delvare 2e613e7f69 therm_adt746x: Convert to a new-style i2c driver
The legacy i2c binding model is going away soon, so convert the ppc
therm_adt746x driver to the new model or it will break.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15 18:01:51 +02:00
Jean Delvare 351ca3e311 windfarm: Convert to new-style i2c drivers
The legacy i2c binding model is going away soon, so convert the
macintosh windfarm drivers to the new model or they will break.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15 18:01:51 +02:00
Jean Delvare 1b9f37d488 therm_pm72: Convert to a new-style i2c driver
The legacy i2c binding model is going away soon, so convert the
macintosh therm_pm72 driver to the new model or it will break.

This is really a quick and dirty conversion, that should do the trick
for now, but no doubt that something cleaner can be done if anyone is
interested.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Paul Mackerras <paulus@samba.org>
2009-06-15 18:01:50 +02:00
Michel Dänzer 0512a9a8e2 therm_adt746x: Always clear hardware bit which inverts fan speed range.
This bit would get enabled sometimes (probably after suspend/resume), so the
fan would run at full speed below the temperature thresholds, but slow down and
eventually stop if temperatures rose above the thresholds... not exactly what
you want.

Signed-off-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02 10:32:44 +10:00
Linus Torvalds d1f53fb90e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  MAINTAINERS: update IDE entry
  palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup
  palm_bk3710: those registers/bitfields don't exist
  mediabay: fix build for CONFIG_BLOCK=n
  ide: Stop disks on reboot for laptop which cuts power
  ide-cd: fix kernel crash on hppa regression
  palm_bk3710: UDMA performance fix
2009-04-24 08:16:05 -07:00
Bartlomiej Zolnierkiewicz 83cff83926 mediabay: fix build for CONFIG_BLOCK=n
On Tuesday 14 April 2009 20:31:21 Subrata Modak wrote:
> Observed the following build error:
> ---
> CC      drivers/macintosh/mediabay.o
> In file included from drivers/macintosh/mediabay.c:21:
> include/linux/ide.h:605: error: field ‘request_sense_rq’ has incomplete
> type
> make[2]: *** [drivers/macintosh/mediabay.o] Error 1
> make[1]: *** [drivers/macintosh] Error 2
> make: *** [drivers] Error 2
> ---

mediabay shouldn't include <linux/ide.h> unconditionally so
remove the superfluous include from mediabay.c (<asm/mediabay.h>
will pull <linux/ide.h> in for CONFIG_BLK_DEV_IDE_PMAC=y).

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22 20:33:41 +02:00
Bartlomiej Zolnierkiewicz 6329db8bd6 powerpc: Fix modular build of ide-pmac when mediabay is built in
Now that the powermac IDE host driver can be modular, we need to
export check_media_bay_by_base() and media_bay_set_ide_infos()
from drivers/macintosh/mediabay.c for it.

This fixes the following build error:

> CC [M]  drivers/ide/pmac.o
> drivers/ide/pmac.c: In function ‘pmac_ide_init_dev’:
> drivers/ide/pmac.c:955: error: implicit declaration of function
> ‘check_media_bay_by_base’
> drivers/ide/pmac.c: In function ‘pmac_ide_setup_device’:
> drivers/ide/pmac.c:1090: error: implicit declaration of function
> ‘media_bay_set_ide_infos’
> make[2]: *** [drivers/ide/pmac.o] Error 1
> make[1]: *** [drivers/ide] Error 2
> make: *** [drivers] Error 2

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-22 14:56:35 +10:00
Alexander Beregalov bcd71fe6b1 powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK
Fixes this build error:

In file included from drivers/macintosh/mediabay.c:21:
include/linux/ide.h:605: error: field 'request_sense_rq' has incomplete type

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-22 14:56:35 +10:00
roel kluin 2e74778c76 therm_adt746x: Fix signed/unsigned confusion
As suggested, this is used for signed rather than unsigned

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:07 +11:00
Linus Torvalds 57c44c5f6f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  trivial: chack -> check typo fix in main Makefile
  trivial: Add a space (and a comma) to a printk in 8250 driver
  trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx
  trivial: Fix misspelling of "firmware" in powerpc Makefile
  trivial: Fix misspelling of "firmware" in usb.c
  trivial: Fix misspelling of "firmware" in qla1280.c
  trivial: Fix misspelling of "firmware" in a100u2w.c
  trivial: Fix misspelling of "firmware" in megaraid.c
  trivial: Fix misspelling of "firmware" in ql4_mbx.c
  trivial: Fix misspelling of "firmware" in acpi_memhotplug.c
  trivial: Fix misspelling of "firmware" in ipw2100.c
  trivial: Fix misspelling of "firmware" in atmel.c
  trivial: Fix misspelled firmware in Kconfig
  trivial: fix an -> a typos in documentation and comments
  trivial: fix then -> than typos in comments and documentation
  trivial: update Jesper Juhl CREDITS entry with new email
  trivial: fix singal -> signal typo
  trivial: Fix incorrect use of "loose" in event.c
  trivial: printk: fix indentation of new_text_line declaration
  trivial: rtc-stk17ta8: fix sparse warning
  ...
2009-01-07 11:31:52 -08:00
Linus Torvalds 40d7ee5d16 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (60 commits)
  uio: make uio_info's name and version const
  UIO: Documentation for UIO ioport info handling
  UIO: Pass information about ioports to userspace (V2)
  UIO: uio_pdrv_genirq: allow custom irq_flags
  UIO: use pci_ioremap_bar() in drivers/uio
  arm: struct device - replace bus_id with dev_name(), dev_set_name()
  libata: struct device - replace bus_id with dev_name(), dev_set_name()
  avr: struct device - replace bus_id with dev_name(), dev_set_name()
  block: struct device - replace bus_id with dev_name(), dev_set_name()
  chris: struct device - replace bus_id with dev_name(), dev_set_name()
  dmi: struct device - replace bus_id with dev_name(), dev_set_name()
  gadget: struct device - replace bus_id with dev_name(), dev_set_name()
  gpio: struct device - replace bus_id with dev_name(), dev_set_name()
  gpu: struct device - replace bus_id with dev_name(), dev_set_name()
  hwmon: struct device - replace bus_id with dev_name(), dev_set_name()
  i2o: struct device - replace bus_id with dev_name(), dev_set_name()
  IA64: struct device - replace bus_id with dev_name(), dev_set_name()
  i7300_idle: struct device - replace bus_id with dev_name(), dev_set_name()
  infiniband: struct device - replace bus_id with dev_name(), dev_set_name()
  ISDN: struct device - replace bus_id with dev_name(), dev_set_name()
  ...
2009-01-06 17:02:07 -08:00
Nicolas Palix 44ea9c809d drivers/macintosh: Add missing of_node_put in therm_adt746x.c
of_node_put is needed before discarding a value received from
of_find_node_by_name, eg in error handling code or when the device node is
no longer used.

The semantic match that catches the bug is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression struct device_node *n;
position p1, p2;
struct device_node *n1;
statement S;
identifier f;
expression E;
expression *ptr != NULL;
@@

n@p1 = of_find_node_by_name(...)
...
if (!n) S
... when != of_node_put(n)
    when != n1 = f(n,...)
    when != E = n
    when any
    when strict
(
  return \(0\|<+...n...+>\|ptr\);
|
return@p2 ...;
|
  of_node_put(n);
|
  n1 = f(n,...)
|
  E = n
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s of_find_node_by_name %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:18 -08:00
Kay Sievers 1d7e6cca1d macintosh: struct device - replace bus_id with dev_name(), dev_set_name()
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:39 -08:00
Frederik Schwarzer 0211a9c850 trivial: fix an -> a typos in documentation and comments
It is always "an" if there is a vowel _spoken_ (not written).
So it is:
"an hour" (spoken vowel)
but
"a uniform" (spoken 'j')

Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06 11:28:07 +01:00
Linus Torvalds 3c92ec8ae9 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits)
  powerpc/44x: Support 16K/64K base page sizes on 44x
  powerpc: Force memory size to be a multiple of PAGE_SIZE
  powerpc/32: Wire up the trampoline code for kdump
  powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M
  powerpc/32: Allow __ioremap on RAM addresses for kdump kernel
  powerpc/32: Setup OF properties for kdump
  powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs()
  powerpc: Prepare xmon_save_regs for use with kdump
  powerpc: Remove default kexec/crash_kernel ops assignments
  powerpc: Make default kexec/crash_kernel ops implicit
  powerpc: Setup OF properties for ppc32 kexec
  powerpc/pseries: Fix cpu hotplug
  powerpc: Fix KVM build on ppc440
  powerpc/cell: add QPACE as a separate Cell platform
  powerpc/cell: fix build breakage with CONFIG_SPUFS disabled
  powerpc/mpc5200: fix error paths in PSC UART probe function
  powerpc/mpc5200: add rts/cts handling in PSC UART driver
  powerpc/mpc5200: Make PSC UART driver update serial errors counters
  powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver
  powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver
  ...

Fix trivial conflict in drivers/char/Makefile as per Paul's directions
2008-12-28 16:54:33 -08:00
Finn Thain 429dbf53bc m68k: machw.h cleanup
Remove some more cruft from machw.h and drop the #include where it isn't
needed.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-12-28 20:00:03 +01:00
Benjamin Herrenschmidt 5e696617c4 powerpc/mm: Split mmu_context handling
This splits the mmu_context handling between 32-bit hash based
processors, 64-bit hash based processors and everybody else.  This is
preliminary work for adding SMP support for BookE processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:15 +11:00
roel kluin 2fd091f3ee powerpc/macintosh: Fix unsigned check in smu_sat_get_sdb_partition()
i2c_smbus_read_word_data() returns a s32, which may be negative
but unsigned len cannot be negative.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 21:04:02 +11:00
Al Viro 31421a6f6e rackmeter section fixes
* rackmeter_remove() reference needs devexit_p
 * rackmeter_setup() is calls devinit and is called only from devinit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-30 10:03:37 -08:00
Greg Kroah-Hartman a9b12619f7 device create: misc: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:43 -07:00
Bartlomiej Zolnierkiewicz b5b9309d34 remove unnecessary <linux/hdreg.h> includes
Following files don't need <linux/hdreg.h> at all:

- arch/mips/jazz/setup.c
- arch/sh/boards/mach-systemh/irq.c
- drivers/macintosh/mediabay.c
- drivers/scsi/hptiop.c
- drivers/usb/storage/freecom.c
- arch/powerpc/include/asm/ide.h
- init/main.c

Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-05 18:16:58 +02:00
Greg Kroah-Hartman 97cd790e3a device create: macintosh: convert device_create to device_create_drvdata
device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:43 -07:00
Dmitry Torokhov 908cf4b925 Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into next 2008-07-21 00:55:14 -04:00
Benjamin Herrenschmidt 43d2548bb2 Merge commit '85082fd7cbe3173198aac0eb5e85ab1edcc6352c' into test-build
Manual fixup of:

	arch/powerpc/Kconfig
2008-07-15 15:44:51 +10:00
Jonathan Corbet 2fceef397f Merge commit 'v2.6.26' into bkl-removal 2008-07-14 15:29:34 -06:00
Arnd Bergmann ffe83733b8 via-pmu: BKL pushdown
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-07-02 15:06:26 -06:00
Julia Lawall 73f38fe1b5 drivers/macintosh/smu.c: Improve error handling
This makes two changes:

* As noted by Akinobu Mita in patch
b1fceac2b9, alloc_bootmem never returns NULL
and always returns a zeroed region of memory.  Thus the error checking code
and memset after the call to alloc_bootmem are not necessary.

* The old error handling code consisted of setting a global variable to
NULL and returning an error code, which could cause previously allocated
resources never to be freed.  The patch adds calls to appropriate resource
deallocation functions.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01 11:28:17 +10:00
Adrian Bunk 9b4a8dd2e9 drivers/macintosh: Various cleanups
This contains the following cleanups:
- make the following needlessly global code static:
  - adb.c: adb_controller
  - adb.c: adb_init()
  - adbhid.c: adb_to_linux_keycodes[]  (also make it const)
  - via-pmu68k.c: backlight_level
  - via-pmu68k.c: backlight_enabled
- remove the following unused code:
  - via-pmu68k.c: sleep_notifier_list

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01 11:28:06 +10:00
Daniel Walker 9a24729d8a macintosh/media bay: Convert semaphore to mutex
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-30 22:30:48 +10:00
Daniel Walker 1baaeea005 macintosh/therm_windtunnel: Convert semaphore to mutex
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-30 22:30:46 +10:00
Stephen Rothwell ad9e05aef7 macintosh: Use linux/of_{device,platform}.h instead of asm
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-30 22:30:33 +10:00
Paul Mackerras e9a4b6a3f6 Merge branch 'linux-2.6' 2008-06-30 10:16:50 +10:00
Arnd Bergmann b9bde77a6a macintosh-smu: BKL pushdown
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-06-20 14:05:58 -06:00
Arnd Bergmann b82829943c ans-lcd: BKL pushdown
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-06-20 14:05:54 -06:00
Jonathan Corbet 26ce4f0684 adb: BKL pushdown
Put explicit lock_kernel() calls in adb_open().  The fact that
adb_release() already has them suggests this is necessary.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-06-20 14:05:52 -06:00
Adrian Bunk 305c736871 [POWERPC] Build fix for drivers/macintosh/mediabay.c
This fixes the following build error with CONFIG_BLK_DEV_IDE_PMAC=n:

<--  snip  -->

...
  CC      drivers/macintosh/mediabay.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/macintosh/mediabay.c: In function 'check_media_bay':
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/macintosh/mediabay.c:428: error: 'struct media_bay_info' has no member named 'cd_index'
make[3]: *** [drivers/macintosh/mediabay.o] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-16 15:00:47 +10:00
Julia Lawall 958a65f205 [POWERPC] Add missing of_node_put in drivers/macintosh/therm_adt746x.c
of_node_put is needed before discarding a value received from
of_find_node_by_name, eg in error handling code.

The semantic patch that makes the change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
struct device_node *n;
struct device_node *n1;
statement S;
identifier f;
expression E;
constant C;
@@

n = of_find_node_by_name(...)
...
if (!n) S
... when != of_node_put(n)
    when != n1 = f(n,...)
    when != E = n
    when any
    when strict
(
+ of_node_put(n);
  return -C;
|
  of_node_put(n);
|
  n1 = f(n,...)
|
  E = n
|
  return ...;
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-16 15:00:39 +10:00
Julia Lawall 8b9dba2ce2 [POWERPC] Add missing of_node_put in drivers/macintosh/smu.c
of_node_put is needed before discarding a value received from
of_find_node_by_type, eg in error handling code.

The semantic patch that makes the change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
struct device_node *n;
struct device_node *n1;
struct device_node *n2;
statement S;
identifier f1,f2;
expression E1,E2;
constant C;
@@

n = of_find_node_by_type(...)
...
if (!n) S
... when != of_node_put(n)
    when != n1 = f1(n,...)
    when != E1 = n
    when any
    when strict
(
+ of_node_put(n);
  return -C;
|
  of_node_put(n);
|
  n2 = f2(n,...)
|
  E2 = n
|
  return ...;
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-16 15:00:35 +10:00
Bartlomiej Zolnierkiewicz c1a8e39819 ide-pmac: bugfix for media-bay support rework
Fix bug introduced by:

commit 2dde7861af
Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date:   Fri Apr 18 00:46:23 2008 +0200

    ide: rework PowerMac media-bay support (take 2)
...

[ Yeah, I suck. ]

bay->cd_index shouldn't be changed if IDE devices are not present
or retry operations won't happen.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-15 21:00:23 +02:00
Rodney Lorrimar 5b7c407baa Input: adbhid - capslock and power button fix
If the adbhid module parameter restore_capslock_events is used,
pressing the power button may confuse the capslock state. This is
because the power button release scancode (0xff) is sometimes the same
as the capslock press/release scancode.

This fix adds yet another flag to track the state of the power button
so that it works independently of capslock.

Signed-off-by: Rodney Lorrimar <rodney@rodney.id.au>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16 14:50:10 -04:00
Rodney Lorrimar 2e75f044c7 Input: adbhid - fix capslock key state after suspend
If the adbhid module parameter restore_capslock_events is used,
sometimes capslock will get stuck down after resuming.

My fix is to remember the capslock state before suspend and then
ignore the first 'caps lock key down' message after resume if the
capslock LED was on before suspending.

Signed-off-by: Rodney Lorrimar <rodney@rodney.id.au>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16 14:50:04 -04:00
Paul Mackerras fcff474ea5 Merge branch 'linux-2.6' into powerpc-next 2008-05-16 23:13:42 +10:00
Robert P. J. Day faa5b9daa8 [POWERPC] macintosh: Replace deprecated __initcall with device_initcall
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-15 20:50:00 +10:00
Olaf Hering 140b932f8c [POWERPC] Create modalias file in sysfs for of_platform bus
Create /sys/bus/of_platform/devices/*/modalias file to allow autoloading
of modules.  Modalias files are already present for many other bus types.
This adds also a newline to the devspec files.

Also create a devspec file for mac-io devices.  They were created as a
side effect.  Use correct buffer size for mac-io modalias buffer.

Tested on iBook1 and Efika.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:28 +10:00
Daniel Walker af3ce514ad [POWERPC] macintosh: ADB driver: adb_handler_sem semaphore to mutex
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-05 16:47:13 +10:00