Commit Graph

28 Commits

Author SHA1 Message Date
Ben Dooks 2a3a18045b ARM: S3C: Add NAND device platform data set call 2009-12-01 01:34:16 +00:00
Ben Dooks 070276d5d0 [ARM] S3C24XX: GPIO: Change to macros for GPIO numbering
Prepare to remove the large number of S3C2410_GPxn defines
by moving to S3C2410_GPx(n) in arch/arm.

The following perl was used to change the files:

    perl -pi~ -e 's/S3C2410_GP([A-Z])([0-9]+)([^_^0-9])/S3C2410_GP\1\(\2\)\3/g'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18 16:26:03 +01:00
Ben Dooks ec976d6eb0 [ARM] S3C24XX: GPIO: Move gpio functions out of <mach/hardware.h>
Move all the gpio functions out of <mach/hardware.h> as
this file is for defining the generic IO base addresses
for the kernel IO calls.

Make a new header <mach/gpio-fns.h> to take this and
include it via the chain from <linux/gpio.h> which is
what most of these files should be using (and will be
changed as soon as possible).

Note, this does make minor changes to some drivers but
should not mess up any pending merges.

CC: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18 16:25:40 +01:00
Ben Dooks 59c1ab6090 [ARM] JIVE: Fix sparse warnings about items which should be static
Make 'jive_vgg2432a4_display' and 'jive_lcd_config' static as
they are not exported, and are generating the following sparse
warnings:

mach-jive.c:280:26: warning: symbol 'jive_vgg2432a4_display' was not declared. Should it be static?
mach-jive.c:313:28: warning: symbol 'jive_lcd_config' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17 12:42:24 +01:00
Huang Weiyi acd216a15d [ARM] S3C: remove duplicated #include
Remove duplicated #include in arch/arm/mach-s3c2412/mach-jive.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15 14:46:03 +01:00
Daniel Silverstone c564e6ae6c i2c-s3c2410: Simplify bus frequency calculation
The platform data for the i2c-s3c2410 driver used to allow a min,
max and desired frequency for the I2C bus. This patch reduces it
to simply a desired frequency ceiling and corrects all the uses
of the platform data appropriately.

This means, for example, that on a system with a 66MHz fclk, a
request for 100KHz will achieve 65KHz which is safe and
acceptable, rather than 378KHz which it would have achieved
without this change.

Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
[ben-linux@fluff.org: tidy subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:33 +01:00
Ben Dooks ef30e14420 [ARM] S3C: Rename sleep.S functions to be non-cpu specific
Rename s3c2410_cpu_resume to s3c_cpu_resume and s3c2410_cpu_save to
s3c_cpu_save to remove the CPU specific naming of these functions
which are now in the generic PM code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:37:05 +00:00
Ben Dooks 4e59c25dcb [ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init.
Since we have moved a large proportion of the PM code to the common
support area, remove the cpu specific name from the initialisation
function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:35:47 +00:00
Ben Dooks 6a148eaa20 [ARM] S3C: Remove unnecessary <linux/delay.h> includes
As per Russell King's last review comment, find and remove
all unnecessary includes of <linux/delay.h> in the files
that do not need them.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18 16:36:02 +00:00
Ben Dooks 56c035c9ce Merge branch 'next-s3c64xx-device' into next-merged
Conflicts:

	arch/arm/mach-s3c2440/mach-at2440evb.c
2008-12-18 16:17:37 +00:00
Ben Dooks 8783b3446b [ARM] JIVE: fix spi gpio implementation
Fix the name of the driver, as well as the fact we are not
passing the number of chipselects to the driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18 14:43:03 +00:00
Ben Dooks 3e1b776c2b [ARM] S3C: Make i2c device definition common to plat-s3c
Make the device i2c0 common to plat-s3c and move the
definitions from arch/arm/plat-s3c24xx/devs.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:40:26 +00:00
Ben Dooks 57bd4b91a6 [ARM] S3C24XX: Movev udc headers to arch/arm/plat-s3c24xx/include/plat
Move the udc headers to the proper home in
arch/arm/plat-s3c24xx/include/plat ready to clean out
the old include directories.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30 10:17:15 +00:00
Ben Dooks 7926b5a325 [ARM] S3C: Move nand headers to arch/arm/plat-s3c/include/plat
Move nand headers to arch/arm/plat-s3c/include/plat
ready to clean out the old include directories.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30 10:17:13 +00:00
Ben Dooks 9498cb7946 [ARM] S3C: Move i2c headers to arch/arm/plat-s3c/include/plat.
Move the i2c headers to arch/arm/plat-s3c/include/plat
ready to clean out the old include directories.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30 10:17:12 +00:00
Ben Dooks d5120ae72a [ARM] S3C24XX: Additional include moves
Continue moving the include files into arch/arm

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-07 23:09:51 +01:00
Ben Dooks a2b7ba9ca4 [ARM] S3C24XX: Move files out of include/asm-arm/plat-s3c*
First move of items out of include/asm-arm/plat-s3c* to their
new homes under arch/arm/plat-s3c/include/plat and
arch/arm/plat-s3c24xx/include/plat directories.

Note, we have to create a dummy arch/arm/plat-s3c/Makefile to
allow us to add arch/arm/plat-s3c/include/plat to the path.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-07 22:26:09 +01:00
Ben Dooks df9f17e20e [ARM] JIVE: Fix the spi bus numbering
The first spi bus is registered with number 0, but
the board data says that the device on it is registered
on bus 1.

Move the spi bus to bus 1 to keep the compatibility with the
original board-support patches.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-26 22:56:22 +01:00
Huang Weiyi 2921047594 [ARM] JIVE: Remove duplicated mtd includes
Removed duplicated include file <linux/mtd/mtd.h> and <linux/mtd/partitions.h>
in arch/arm/mach-s3c2412/mach-jive.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-09 13:51:52 +01:00
Russell King a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Ben Dooks dd1086f43d [ARM] JIVE: Add power off on shutdown support
Add pm_power_off hook to allow the Logitech Jive to shutdown
when asked to halt.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:27 +01:00
Ben Dooks d10d8a5f79 [ARM] JIVE: Add i2c device info for LIS302DL sensor
Add i2c bus definition for the LIS302DL sensor driver
which is connected on the i2c bus.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:26 +01:00
Ben Dooks fd2de272b2 [ARM] JIVE: Add board definitions for audio
Add board definitions for the audio device connected
on the Logitech Jive.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:26 +01:00
Ben Dooks c2c1708f9d [ARM] JIVE: Add LCD display setup information
Add the setup information for the LCD display
connected to the device.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:25 +01:00
Ben Dooks a2ed406515 [ARM] JIVE: Add SPI bus definitions for LCD controller
Add the definitions for the VGG2432A4 intelligent
LCD display conneected via an GPIO-based SPI bus
on the Logitech Jive.

Signed-of-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:25 +01:00
Ben Dooks 0f99263cda [ARM] JIVE: Add setup information for the S3C2412 LCD controller
Setup the video controller information for the Jive.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:25 +01:00
Ben Dooks 54c272acd1 [ARM] JIVE: Initialise the sleep configuration registers
Ensure that the S3C2412 sleep configuration registers
are approriately setup so that the device can safely
go to sleep.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:24 +01:00
Ben Dooks 9db829f485 [ARM] JIVE: Initial machine support for Logitech Jive
This is the base machine support for the Logitech Jive
machine.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:24 +01:00