Here we are not going to free memory, no need to remove every node
one by one, just init root node here is ok.
Cc: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We don't have to keep subvolume's block_rsv during transaction commit,
and within transaction commit, we may also need the free space reclaimed
from this block_rsv to process delayed refs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we ran the 274th case of xfstests with nodatacow mount option,
We met the following warning message:
WARNING: CPU: 1 PID: 14185 at fs/btrfs/extent-tree.c:3734 btrfs_free_reserved_data_space+0xa6/0xd0
It is caused by the race between the write back and nocow buffered
write:
Task1 Task2
__btrfs_buffered_write()
skip data reservation
reserve the metadata space
copy the data
dirty the pages
unlock the pages
write back the pages
release the data space
becasue there is no
noreserve flag
set the noreserve flag
This patch fixes this problem by unlocking the pages after
the noreserve flag is set.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The backref walking code will search down to the key it is looking for and then
proceed to walk _all_ of the extents on the file until it hits the end. This is
suboptimal with large files, we only need to look for as many extents as we have
references for that inode. I have a testcase that creates a randomly written 4
gig file and before this patch it took 6min 30sec to do the initial send, with
this patch it takes 2min 30sec to do the intial send. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Could have sworn I fixed this before but apparently not. This makes us pass
btrfs/022 with skinny metadata enabled. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
I don't think this is an issue and I've not seen it in practice but
extent_from_logical will fail to find a skinny extent because it uses
btrfs_previous_item and gives it the normal extent item type. This is just not
a place to use btrfs_previous_item since we care about either normal extents or
skinny extents, so open code btrfs_previous_item to properly check. This would
only affect metadata and the only place this is used for metadata is scrub and
I'm pretty sure it's just for printing stuff out, not actually doing any work so
hopefully it was never a problem other than a cosmetic one. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
On one of our gluster clusters we noticed some pretty big lag spikes. This
turned out to be because our transaction commit was taking like 3 minutes to
complete. This is because we have like 30 gigs of metadata, so our global
reserve would end up being the max which is like 512 mb. So our throttling code
would allow a ridiculous amount of delayed refs to build up and then they'd all
get run at transaction commit time, and for a cold mounted file system that
could take up to 3 minutes to run. So fix the throttling to be based on both
the size of the global reserve and how long it takes us to run delayed refs.
This patch tracks the time it takes to run delayed refs and then only allows 1
seconds worth of outstanding delayed refs at a time. This way it will auto-tune
itself from cold cache up to when everything is in memory and it no longer has
to go to disk. This makes our transaction commits take much less time to run.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently we have two rb-trees, one for delayed ref heads and one for all of the
delayed refs, including the delayed ref heads. When we process the delayed refs
we have to hold onto the delayed ref lock for all of the selecting and merging
and such, which results in quite a bit of lock contention. This was solved by
having a waitqueue and only one flusher at a time, however this hurts if we get
a lot of delayed refs queued up.
So instead just have an rb tree for the delayed ref heads, and then attach the
delayed ref updates to an rb tree that is per delayed ref head. Then we only
need to take the delayed ref lock when adding new delayed refs and when
selecting a delayed ref head to process, all the rest of the time we deal with a
per delayed ref head lock which will be much less contentious.
The locking rules for this get a little more complicated since we have to lock
up to 3 things to properly process delayed refs, but I will address that problem
later. For now this passes all of xfstests and my overnight stress tests.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Looking into some performance related issues with large amounts of metadata
revealed that we can have some pretty huge swings in fsync() performance. If we
have a lot of delayed refs backed up (as you will tend to do with lots of
metadata) fsync() will wander off and try to run some of those delayed refs
which can result in reading from disk and such. Since the actual act of fsync()
doesn't create any delayed refs there is no need to make it throttle on delayed
ref stuff, that will be handled by other people. With this patch we get much
smoother fsync performance with large amounts of metadata. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
This change adds infrastructure to allow for generic properties for
inodes. Properties are name/value pairs that can be associated with
inodes for different purposes. They are stored as xattrs with the
prefix "btrfs."
Properties can be inherited - this means when a directory inode has
inheritable properties set, these are added to new inodes created
under that directory. Further, subvolumes can also have properties
associated with them, and they can be inherited from their parent
subvolume. Naturally, directory properties have priority over subvolume
properties (in practice a subvolume property is just a regular
property associated with the root inode, objectid 256, of the
subvolume's fs tree).
This change also adds one specific property implementation, named
"compression", whose values can be "lzo" or "zlib" and it's an
inheritable property.
The corresponding changes to btrfs-progs were also implemented.
A patch with xfstests for this feature will follow once there's
agreement on this change/feature.
Further, the script at the bottom of this commit message was used to
do some benchmarks to measure any performance penalties of this feature.
Basically the tests correspond to:
Test 1 - create a filesystem and mount it with compress-force=lzo,
then sequentially create N files of 64Kb each, measure how long it took
to create the files, unmount the filesystem, mount the filesystem and
perform an 'ls -lha' against the test directory holding the N files, and
report the time the command took.
Test 2 - create a filesystem and don't use any compression option when
mounting it - instead set the compression property of the subvolume's
root to 'lzo'. Then create N files of 64Kb, and report the time it took.
The unmount the filesystem, mount it again and perform an 'ls -lha' like
in the former test. This means every single file ends up with a property
(xattr) associated to it.
Test 3 - same as test 2, but uses 4 properties - 3 are duplicates of the
compression property, have no real effect other than adding more work
when inheriting properties and taking more btree leaf space.
Test 4 - same as test 3 but with 10 properties per file.
Results (in seconds, and averages of 5 runs each), for different N
numbers of files follow.
* Without properties (test 1)
file creation time ls -lha time
10 000 files 3.49 0.76
100 000 files 47.19 8.37
1 000 000 files 518.51 107.06
* With 1 property (compression property set to lzo - test 2)
file creation time ls -lha time
10 000 files 3.63 0.93
100 000 files 48.56 9.74
1 000 000 files 537.72 125.11
* With 4 properties (test 3)
file creation time ls -lha time
10 000 files 3.94 1.20
100 000 files 52.14 11.48
1 000 000 files 572.70 142.13
* With 10 properties (test 4)
file creation time ls -lha time
10 000 files 4.61 1.35
100 000 files 58.86 13.83
1 000 000 files 656.01 177.61
The increased latencies with properties are essencialy because of:
*) When creating an inode, we now synchronously write 1 more item
(an xattr item) for each property inherited from the parent dir
(or subvolume). This could be done in an asynchronous way such
as we do for dir intex items (delayed-inode.c), which could help
reduce the file creation latency;
*) With properties, we now have larger fs trees. For this particular
test each xattr item uses 75 bytes of leaf space in the fs tree.
This could be less by using a new item for xattr items, instead of
the current btrfs_dir_item, since we could cut the 'location' and
'type' fields (saving 18 bytes) and maybe 'transid' too (saving a
total of 26 bytes per xattr item) from the btrfs_dir_item type.
Also tried batching the xattr insertions (ignoring proper hash
collision handling, since it didn't exist) when creating files that
inherit properties from their parent inode/subvolume, but the end
results were (surprisingly) essentially the same.
Test script:
$ cat test.pl
#!/usr/bin/perl -w
use strict;
use Time::HiRes qw(time);
use constant NUM_FILES => 10_000;
use constant FILE_SIZES => (64 * 1024);
use constant DEV => '/dev/sdb4';
use constant MNT_POINT => '/home/fdmanana/btrfs-tests/dev';
use constant TEST_DIR => (MNT_POINT . '/testdir');
system("mkfs.btrfs", "-l", "16384", "-f", DEV) == 0 or die "mkfs.btrfs failed!";
# following line for testing without properties
#system("mount", "-o", "compress-force=lzo", DEV, MNT_POINT) == 0 or die "mount failed!";
# following 2 lines for testing with properties
system("mount", DEV, MNT_POINT) == 0 or die "mount failed!";
system("btrfs", "prop", "set", MNT_POINT, "compression", "lzo") == 0 or die "set prop failed!";
system("mkdir", TEST_DIR) == 0 or die "mkdir failed!";
my ($t1, $t2);
$t1 = time();
for (my $i = 1; $i <= NUM_FILES; $i++) {
my $p = TEST_DIR . '/file_' . $i;
open(my $f, '>', $p) or die "Error opening file!";
$f->autoflush(1);
for (my $j = 0; $j < FILE_SIZES; $j += 4096) {
print $f ('A' x 4096) or die "Error writing to file!";
}
close($f);
}
$t2 = time();
print "Time to create " . NUM_FILES . ": " . ($t2 - $t1) . " seconds.\n";
system("umount", DEV) == 0 or die "umount failed!";
system("mount", DEV, MNT_POINT) == 0 or die "mount failed!";
$t1 = time();
system("bash -c 'ls -lha " . TEST_DIR . " > /dev/null'") == 0 or die "ls failed!";
$t2 = time();
print "Time to ls -lha all files: " . ($t2 - $t1) . " seconds.\n";
system("umount", DEV) == 0 or die "umount failed!";
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When writing to a file we drop existing file extent items that cover the
write range and then add a new file extent item that represents that write
range.
Before this change we were doing a tree lookup to remove the file extent
items, and then after we did another tree lookup to insert the new file
extent item.
Most of the time all the file extent items we need to drop are located
within a single leaf - this is the leaf where our new file extent item ends
up at. Therefore, in this common case just combine these 2 operations into
a single one.
By avoiding the second btree navigation for insertion of the new file extent
item, we reduce btree node/leaf lock acquisitions/releases, btree block/leaf
COW operations, CPU time on btree node/leaf key binary searches, etc.
Besides for file writes, this is an operation that happens for file fsync's
as well. However log btrees are much less likely to big as big as regular
fs btrees, therefore the impact of this change is smaller.
The following benchmark was performed against an SSD drive and a
HDD drive, both for random and sequential writes:
sysbench --test=fileio --file-num=4096 --file-total-size=8G \
--file-test-mode=[rndwr|seqwr] --num-threads=512 \
--file-block-size=8192 \ --max-requests=1000000 \
--file-fsync-freq=0 --file-io-mode=sync [prepare|run]
All results below are averages of 10 runs of the respective test.
** SSD sequential writes
Before this change: 225.88 Mb/sec
After this change: 277.26 Mb/sec
** SSD random writes
Before this change: 49.91 Mb/sec
After this change: 56.39 Mb/sec
** HDD sequential writes
Before this change: 68.53 Mb/sec
After this change: 69.87 Mb/sec
** HDD random writes
Before this change: 13.04 Mb/sec
After this change: 14.39 Mb/sec
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We may return early in btrfs_drop_snapshot(), we shouldn't
call btrfs_std_err() for this case, fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We will finish orphan cleanups during snapshot, so we don't
have to commit transaction here.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We should gurantee that parent and clone roots can not be destroyed
during send, for this we have two ideas.
1.by holding @subvol_sem, this might be a nightmare, because it will
block all subvolumes deletion for a long time.
2.Miao pointed out we can reuse @send_in_progress, that mean we will
skip snapshot deletion if root sending is in progress.
Here we adopt the second approach since it won't block other subvolumes
deletion for a long time.
Besides in btrfs_clean_one_deleted_snapshot(), we only check first root
, if this root is involved in send, we return directly rather than
continue to check.There are several reasons about it:
1.this case happen seldomly.
2.after sending,cleaner thread can continue to drop that root.
3.make code simple
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Steps to reproduce:
# mkfs.btrfs -f /dev/sda8
# mount /dev/sda8 /mnt
# btrfs sub snapshot -r /mnt /mnt/snap1
# btrfs sub snapshot -r /mnt /mnt/snap2
# btrfs send /mnt/snap1 -p /mnt/snap2 -f /mnt/1
# dmesg
The problem is that we will sort clone roots(include @send_root), it
might push @send_root before thus @send_root's @send_in_progress will
be decreased twice.
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add treelog mount option to enable tree log with
remount option.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add datasum mount option to enable checksum with
remount option.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add datacow mount option to enable copy-on-write with
remount option.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add acl mount option to enable acl with remount option.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add noflushoncommit mount option to disable flush on commit with
remount option.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add noenospc_debug mount option to disable ENOSPC debug with
remount option.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add nodiscard mount option to disable discard with remount option.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs has autodefrag mount option but no pairing noautodefrag option,
which makes it impossible to disable autodefrag without umount.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs can be remounted without barrier, but there is no "barrier" option
so nobody can remount btrfs back with barrier on. Only umount and
mount again can re-enable barrier.(Quite awkward)
Also the mount options in the document is also changed slightly for the
further pairing options changes.
Reported-by: Daniel Blueman <daniel@quora.org>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Mike Fleetwood <mike.fleetwood@googlemail.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We only intent to fua the first superblock in every device from
comments, fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
@full is not protected within global_rsv.lock, so we may think global_rsv
is already full but in fact it's not, so we miss the opportunity to return
free space to global_rsv directly when we release other block_rsvs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
During balance test, we hit an oops:
[ 2013.841551] kernel BUG at fs/btrfs/relocation.c:1174!
The problem is that if we fail to relocate tree blocks, we should
update backref cache, otherwise, some pending nodes are not updated
while snapshot check @cache->last_trans is within one transaction
and won't update it and then oops happen.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The following warning message was outputed when running the 274th case
of xfstests with nodatacow option:
BUG: Bad page state in process kswapd0 pfn:1c66f
page:ffffea0000636848 count:0 mapcount:0 mapping:(null) index:0x78000
page flags: 0x1000000000100a(error|uptodate|private_2)
It is because the check of nocow range was wrong, we should compare the
start and end position of the extent with the write position to verify
if the write position was in the extent, but the current code just used
the start postion to do the check, so we got the wrong extent and told
the caller that it was a nocow write. And then when we write back the
dirty pages, we found we should cow the extent, but at that time, there
was no space in the fs, we had to the error flag for the page. When
someone reclaimed that page, the above warning outputed. Fix it.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Previously, we will free reloc root memory and then force filesystem
to be readonly. The problem is that there may be another thread commiting
transaction which will try to access freed reloc root during merging reloc
roots process.
To keep consistency snapshots shared space, we should allow snapshot
finished if possible, so here we don't free reloc root memory.
signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
@nr is no longer used, remove it from select_reloc_root()
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we do a btree search with the goal of updating an existing item
without changing its size (ins_len == 0 and cow == 1), then we never
need to hold locks on upper level nodes (even when slot == 0) after we
COW their child nodes/leaves, as we won't have node splits or merges
in this scenario (that is, no key additions, removals or shifts on any
nodes or leaves).
Therefore release the locks immediately after COWing the child nodes/leaves
while navigating the btree, even if their parent slot is 0, instead of
returning a path to the caller with those nodes locked, which would get
released only when the caller releases or frees the path (or if it calls
btrfs_unlock_up_safe).
This is a common scenario, for example when updating inode items in fs
trees and block group items in the extent tree.
The following benchmarks were performed on a quad core machine with 32Gb
of ram, using a leaf/node size of 4Kb (to generate deeper fs trees more
quickly).
sysbench --test=fileio --file-num=131072 --file-total-size=8G \
--file-test-mode=seqwr --num-threads=512 --file-block-size=8192 \
--max-requests=100000 --file-io-mode=sync [prepare|run]
Before this change: 49.85Mb/s (average of 5 runs)
After this change: 50.38Mb/s (average of 5 runs)
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The local variable 'new_size' comes from userspace. If a large number
was passed, there would be an integer overflow in the following line:
new_size = old_size + new_size;
Signed-off-by: Wenliang Fan <fanwlexca@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We can starve out the transaction commit with a bunch of caching threads all
running at the same time. This is because we will only drop the
extent_commit_sem if we need_resched(), which isn't likely to happen since we
will be reading a lot from the disk so have already schedule()'ed plenty. Alex
observed that he could starve out a transaction commit for up to a minute with
32 caching threads all running at once. This will allow us to drop the
extent_commit_sem to allow the transaction commit to swap the commit_root out
and then all the cachers will start back up. Here is an explanation provided by
Igno
So, just to fill in what happens in this loop:
mutex_unlock(&caching_ctl->mutex);
cond_resched();
goto again;
where 'again:' takes caching_ctl->mutex and fs_info->extent_commit_sem
again:
again:
mutex_lock(&caching_ctl->mutex);
/* need to make sure the commit_root doesn't disappear */
down_read(&fs_info->extent_commit_sem);
So, if I'm reading the code correct, there can be a fair amount of
concurrency here: there may be multiple 'caching kthreads' per filesystem
active, while there's one fs_info->extent_commit_sem per filesystem
AFAICS.
So, what happens if there are a lot of CPUs all busy holding the
->extent_commit_sem rwsem read-locked and a writer arrives? They'd all
rush to try to release the fs_info->extent_commit_sem, and they'd block in
the down_read() because there's a writer waiting.
So there's a guarantee of forward progress. This should answer akpm's
concern I think.
Thanks,
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
The inode reference item is close to inode item, so we insert it simultaneously
with the inode item insertion when we create a file/directory.. In fact, we also
can handle the inode reference deletion by the same way. So we made this patch to
introduce the delayed inode reference deletion for the single link inode(At most
case, the file doesn't has hard link, so we don't take the hard link into account).
This function is based on the delayed inode mechanism. After applying this patch,
we can reduce the time of the file/directory deletion by ~10%.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Two reasons:
- btrfs_end_transaction_dmeta() is the same as btrfs_end_transaction_throttle()
so it is unnecessary.
- All the delayed items should be dealt in the current transaction, so the
workers should not commit the transaction, instead, deal with the delayed
items as many as possible.
So we can remove btrfs_end_transaction_dmeta()
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
- move the condition check for wait into a function
- use wait_event_interruptible instead of prepare-schedule-finish process
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
If the number of the delayed items is greater than the upper limit, we will
try to flush all the delayed items. After that, it is unnecessary to run
them again because they are being dealt with by the wokers or the number of
them is less than the lower limit.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Before applying the patch
commit de3cb945db
title: Btrfs: improve the delayed inode throttling
We need requeue the async work after the current work was done, it
introduced a deadlock problem. So we wrote the code that this patch
removes to avoid the above problem. But after applying the above
patch, the deadlock problem didn't exist. So we should remove that
fix code.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Convert all applicable cases of printk and pr_* to the btrfs_* macros.
Fix all uses of the BTRFS prefix.
Signed-off-by: Frank Holton <fholton@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
While running the test btrfs/004 from xfstests in a loop, it failed
about 1 time out of 20 runs in my desktop. The failure happened in
the backref walking part of the test, and the test's error message was
like this:
btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad)
--- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000
+++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000
@@ -1,3 +1,8 @@
QA output created by 004
*** test backref walking
-*** done
+unexpected output from
+ /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1
+expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got:
+
...
(Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff)
Ran: btrfs/004
Failures: btrfs/004
Failed 1 of 1 tests
But immediately after the test finished, the btrfs inspect-internal command
returned the expected output:
$ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1
inode 405 offset 454656 root 258
inode 405 offset 454656 root 5
It turned out this was because the btrfs_search_old_slot() calls performed
during backref walking (backref.c:__resolve_indirect_ref) were not finding
anything. The reason for this turned out to be that the tree mod logging
code was not logging some node multi-step operations atomically, therefore
btrfs_search_old_slot() callers iterated often over an incomplete tree that
wasn't fully consistent with any tree state from the past. Besides missing
items, this often (but not always) resulted in -EIO errors during old slot
searches, reported in dmesg like this:
[ 4299.933936] ------------[ cut here ]------------
[ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]()
[ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h
[ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70
[ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012
[ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007
[ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70
[ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000
[ 4299.933987] Call Trace:
[ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76
[ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0
[ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20
[ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs]
[ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50
[ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs]
[ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs]
[ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs]
[ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs]
[ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs]
[ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs]
[ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs]
[ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50
[ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs]
[ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs]
[ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs]
[ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00
[ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40
[ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0
[ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570
[ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6
[ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0
[ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13
[ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0
[ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b
[ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b
[ 4299.934104] ---[ end trace 48f0cfc902491414 ]---
[ 4299.934378] btrfs bad fsid on block 0
These tree mod log operations that must be performed atomically, tree_mod_log_free_eb,
tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to
be performed atomically before the following commit:
c8cc634165
(Btrfs: stop using GFP_ATOMIC for the tree mod log allocations)
That change removed the atomicity of such operations. This patch restores the
atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem
structures, so it has to do the allocations using GFP_NOFS before acquiring
the mod log lock.
This issue has been experienced by several users recently, such as for example:
http://www.spinics.net/lists/linux-btrfs/msg28574.html
After running the btrfs/004 test for 679 consecutive iterations with this
patch applied, I didn't ran into the issue anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Warn if the balance goes below zero, which appears to be unlikely
though. Otherwise cleans up the code a bit.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Since daivd did the work that force us to use readonly snapshot,
we can safely remove transaction protection from btrfs send.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We met the following oops when doing space balance:
kobject (ffff88081b590278): tried to init an initialized object, something is seriously wrong.
...
Call Trace:
[<ffffffff81937262>] dump_stack+0x49/0x5f
[<ffffffff8137d259>] kobject_init+0x89/0xa0
[<ffffffff8137d36a>] kobject_init_and_add+0x2a/0x70
[<ffffffffa009bd79>] ? clear_extent_bit+0x199/0x470 [btrfs]
[<ffffffffa005e82c>] __link_block_group+0xfc/0x120 [btrfs]
[<ffffffffa006b9db>] btrfs_make_block_group+0x24b/0x370 [btrfs]
[<ffffffffa00a899b>] __btrfs_alloc_chunk+0x54b/0x7e0 [btrfs]
[<ffffffffa00a8c6f>] btrfs_alloc_chunk+0x3f/0x50 [btrfs]
[<ffffffffa0060123>] do_chunk_alloc+0x363/0x440 [btrfs]
[<ffffffffa00633d4>] btrfs_check_data_free_space+0x104/0x310 [btrfs]
[<ffffffffa0069f4d>] btrfs_write_dirty_block_groups+0x48d/0x600 [btrfs]
[<ffffffffa007aad4>] commit_cowonly_roots+0x184/0x250 [btrfs]
...
Steps to reproduce:
# mkfs.btrfs -f <dev>
# mount -o nospace_cache <dev> <mnt>
# btrfs balance start <mnt>
# dd if=/dev/zero of=<mnt>/tmpfile bs=1M count=1
The reason of this problem is that we initialized the raid kobject when we added
a block group into a empty raid list. As we know, when we mounted a btrfs filesystem,
the raid list was empty, we would initialize the raid kobject when we added the first
block group. But if there was not data stored in the block group, the block group
would be freed when doing balance, and the raid list would be empty. And then if we
allocated a new block group and added it into the raid list, we would initialize
the raid kobject again, the oops happened.
Fix this problem by initializing the raid kobject just when mounting the fs.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reported-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
All the subvolues that are involved in send must be read-only during the
whole operation. The ioctl SUBVOL_SETFLAGS could be used to change the
status to read-write and the result of send stream is undefined if the
data change unexpectedly.
Fix that by adding a refcount for all involved roots and verify that
there's no send in progress during SUBVOL_SETFLAGS ioctl call that does
read-only -> read-write transition.
We need refcounts because there are no restrictions on number of send
parallel operations currently run on a single subvolume, be it source,
parent or one of the multiple clone sources.
Kernel is silent when the RO checks fail and returns EPERM. The same set
of checks is done already in userspace before send starts.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Unused since ed2590953b
"Btrfs: stop using vfs_read in send".
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Remove ifdefed code:
- tlv_put for 8, 16 and 32, add a generic tempalte if needed in future
- tlv_put_timespec - the btrfs_timespec fields are used
- fs_path_remove obsoleted long ago
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
While running btrfs/004 from xfstests, after 503 iterations, dmesg reported
a deadlock between tasks iterating inode refs and tasks running delayed inodes
(during a transaction commit).
It turns out that iterating inode refs implies doing one tree search and
release all nodes in the path except the leaf node, and then passing that
leaf node to btrfs_ref_to_path(), which in turn does another tree search
without releasing the lock on the leaf node it received as parameter.
This is a problem when other task wants to write to the btree as well and
ends up updating the leaf that is read locked - the writer task locks the
parent of the leaf and then blocks waiting for the leaf's lock to be
released - at the same time, the task executing btrfs_ref_to_path()
does a second tree search, without releasing the lock on the first leaf,
and wants to access a leaf (the same or another one) that is a child of
the same parent, resulting in a deadlock.
The trace reported by lockdep follows.
[84314.936373] INFO: task fsstress:11930 blocked for more than 120 seconds.
[84314.936381] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70
[84314.936383] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[84314.936386] fsstress D ffff8806e1bf8000 0 11930 11926 0x00000000
[84314.936393] ffff8804d6d89b78 0000000000000046 ffff8804d6d89b18 ffffffff810bd8bd
[84314.936399] ffff8806e1bf8000 ffff8804d6d89fd8 ffff8804d6d89fd8 ffff8804d6d89fd8
[84314.936405] ffff880806308000 ffff8806e1bf8000 ffff8804d6d89c08 ffff8804deb8f190
[84314.936410] Call Trace:
[84314.936421] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10
[84314.936428] [<ffffffff81774269>] schedule+0x29/0x70
[84314.936451] [<ffffffffa0715bf5>] btrfs_tree_lock+0x75/0x270 [btrfs]
[84314.936457] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60
[84314.936470] [<ffffffffa06ba231>] btrfs_search_slot+0x7f1/0x930 [btrfs]
[84314.936489] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs]
[84314.936504] [<ffffffffa06d2e1f>] btrfs_lookup_inode+0x2f/0xa0 [btrfs]
[84314.936510] [<ffffffff810bd6ef>] ? trace_hardirqs_on_caller+0x1f/0x1e0
[84314.936528] [<ffffffffa073173c>] __btrfs_update_delayed_inode+0x4c/0x1d0 [btrfs]
[84314.936543] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs]
[84314.936558] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs]
[84314.936573] [<ffffffffa0731c82>] __btrfs_run_delayed_items+0x192/0x1e0 [btrfs]
[84314.936589] [<ffffffffa0731d03>] btrfs_run_delayed_items+0x13/0x20 [btrfs]
[84314.936604] [<ffffffffa06dbcd4>] btrfs_flush_all_pending_stuffs+0x24/0x80 [btrfs]
[84314.936620] [<ffffffffa06ddc13>] btrfs_commit_transaction+0x223/0xa20 [btrfs]
[84314.936630] [<ffffffffa06ae5ae>] btrfs_sync_fs+0x6e/0x110 [btrfs]
[84314.936635] [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60
[84314.936639] [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60
[84314.936643] [<ffffffff811d0b70>] sync_fs_one_sb+0x20/0x30
[84314.936648] [<ffffffff811a3541>] iterate_supers+0xf1/0x100
[84314.936652] [<ffffffff811d0c45>] sys_sync+0x55/0x90
[84314.936658] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b
[84314.936660] INFO: lockdep is turned off.
[84314.936663] INFO: task btrfs:11955 blocked for more than 120 seconds.
[84314.936666] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70
[84314.936668] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[84314.936670] btrfs D ffff880541729a88 0 11955 11608 0x00000000
[84314.936674] ffff880541729a38 0000000000000046 ffff8805417299d8 ffffffff810bd8bd
[84314.936680] ffff88075430c8a0 ffff880541729fd8 ffff880541729fd8 ffff880541729fd8
[84314.936685] ffffffff81c104e0 ffff88075430c8a0 ffff8804de8b00b8 ffff8804de8b0000
[84314.936690] Call Trace:
[84314.936695] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10
[84314.936700] [<ffffffff81774269>] schedule+0x29/0x70
[84314.936717] [<ffffffffa0715815>] btrfs_tree_read_lock+0xd5/0x140 [btrfs]
[84314.936721] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60
[84314.936733] [<ffffffffa06ba201>] btrfs_search_slot+0x7c1/0x930 [btrfs]
[84314.936746] [<ffffffffa06bd505>] btrfs_find_item+0x55/0x160 [btrfs]
[84314.936763] [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs]
[84314.936780] [<ffffffffa073c9ca>] btrfs_ref_to_path+0xba/0x1e0 [btrfs]
[84314.936797] [<ffffffffa06f9719>] ? release_extent_buffer+0xb9/0xe0 [btrfs]
[84314.936813] [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs]
[84314.936830] [<ffffffffa073cb50>] inode_to_path+0x60/0xd0 [btrfs]
[84314.936846] [<ffffffffa073d365>] paths_from_inode+0x115/0x3c0 [btrfs]
[84314.936851] [<ffffffff8118dd44>] ? kmem_cache_alloc_trace+0x114/0x200
[84314.936868] [<ffffffffa0714494>] btrfs_ioctl+0xf14/0x2030 [btrfs]
[84314.936873] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50
[84314.936877] [<ffffffff8116598f>] ? handle_mm_fault+0x34f/0xb00
[84314.936882] [<ffffffff81075563>] ? up_read+0x23/0x40
[84314.936886] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0
[84314.936892] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570
[84314.936896] [<ffffffff81776e23>] ? error_sti+0x5/0x6
[84314.936901] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0
[84314.936906] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13
[84314.936910] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0
[84314.936915] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[84314.936920] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b
[84314.936922] INFO: lockdep is turned off.
[84434.866873] INFO: task btrfs-transacti:11921 blocked for more than 120 seconds.
[84434.866881] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70
[84434.866883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[84434.866886] btrfs-transacti D ffff880755b6a478 0 11921 2 0x00000000
[84434.866893] ffff8800735b9ce8 0000000000000046 ffff8800735b9c88 ffffffff810bd8bd
[84434.866899] ffff8805a1b848a0 ffff8800735b9fd8 ffff8800735b9fd8 ffff8800735b9fd8
[84434.866904] ffffffff81c104e0 ffff8805a1b848a0 ffff880755b6a478 ffff8804cece78f0
[84434.866910] Call Trace:
[84434.866920] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10
[84434.866927] [<ffffffff81774269>] schedule+0x29/0x70
[84434.866948] [<ffffffffa06dd2ef>] wait_current_trans.isra.33+0xbf/0x120 [btrfs]
[84434.866954] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60
[84434.866970] [<ffffffffa06dec18>] start_transaction+0x388/0x5a0 [btrfs]
[84434.866985] [<ffffffffa06db9b5>] ? transaction_kthread+0xb5/0x280 [btrfs]
[84434.866999] [<ffffffffa06dee97>] btrfs_attach_transaction+0x17/0x20 [btrfs]
[84434.867012] [<ffffffffa06dba9e>] transaction_kthread+0x19e/0x280 [btrfs]
[84434.867026] [<ffffffffa06db900>] ? open_ctree+0x2260/0x2260 [btrfs]
[84434.867030] [<ffffffff81070dad>] kthread+0xed/0x100
[84434.867035] [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190
[84434.867040] [<ffffffff8177ee6c>] ret_from_fork+0x7c/0xb0
[84434.867044] [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Chris introduced hleper function read_csums() and this function
has been removed, but we forgot to remove its corresponding comments.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
It's not used anywhere, so just drop it.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
fs/btrfs/file.c: In function ‘prepare_pages.isra.18’:
fs/btrfs/file.c:1265:6: warning: ‘err’ may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We have commited transaction before, remove redundant filemap writting and
waiting here, it can speed up balance relocation process.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Clean up btrfs_lookup_dentry() to never return NULL, but PTR_ERR(-ENOENT)
instead. This keeps the return value convention consistent.
Callers who use btrfs_lookup_dentry() require a trivial update.
create_snapshot() in particular looks like it can also lose a BUG_ON(!inode)
which is not really needed - there seems less harm in returning ENOENT to
userspace at that point in the stack than there is to crash the machine.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
In ctree.c:tree_mod_log_set_node_key() we were calling
__tree_mod_log_insert_key() even when the modification doesn't need
to be logged. This would allocate a tree_mod_elem structure, fill it
and pass it to __tree_mod_log_insert(), which would just acquire
the tree mod log write lock and then free the tree_mod_elem structure
and return (that is, a no-op).
Therefore call tree_mod_log_insert() instead of __tree_mod_log_insert()
which just returns immediately if the modification doesn't need to be
logged (without allocating the structure, fill it, acquire write lock,
free structure).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
I need to create a fake tree to test qgroups and I don't want to have to setup a
fake btree_inode. The fact is we only use the radix tree for the fs_info, so
everybody else who allocates an extent_io_tree is just wasting the space anyway.
This patch moves the radix tree and its lock into btrfs_fs_info so there is less
stuff I have to fake to do qgroup sanity tests. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
For creating a dummy in-memory btree I need to be able to use the radix tree to
keep track of the buffers like normal extent buffers. With dummy buffers we
skip the radix tree step, and we still want to do that for the tree mod log
dummy buffers but for my test buffers we need to be able to remove them from the
radix tree like normal. This will give me a way to do that. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
I need to add infrastructure to allocate dummy extent buffers for running sanity
tests, and to do this I need to not have to worry about having an
address_mapping for an io_tree, so just fix up the places where we assume that
all io_tree's have a non-NULL ->mapping. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently when finding the leaf to insert a key into a btree, if the
leaf doesn't have enough space to store the item we attempt to move
off some items from our leaf to its right neighbor leaf, and if this
fails to create enough free space in our leaf, we try to move off more
items to the left neighbor leaf as well.
When trying to move off items to the right neighbor leaf, if it has
enough room to store the new key but not not enough room to move off
at least one item from our target leaf, __push_leaf_right returns 1 and
we have to attempt to move items to the left neighbor (push_leaf_left
function) without touching the right neighbor leaf.
For the case where the right leaf has enough room to store at least 1
item from our leaf, we end up modifying (and dirtying) both our leaf
and the right leaf. This is non-optimal for the case where the new key
is greater than any key in our target leaf because it can be inserted at
slot 0 of the right neighbor leaf and we don't need to touch our leaf
at all nor to attempt to move off items to the left neighbor leaf.
Therefore this change just selects the right neighbor leaf as our new
target leaf if it has enough room for the new key without modifying our
initial target leaf - we do this only if the new key is higher than any
key in the initial target leaf.
While running the following test, push_leaf_right was called by split_leaf
4802 times. Out of those 4802 calls, for 2571 calls (53.5%) we hit this
special case (right leaf has enough room and new key is higher than any key
in the initial target leaf).
Test:
sysbench --test=fileio --file-num=512 --file-total-size=5G \
--file-test-mode=[seqwr|rndwr] --num-threads=512 --file-block-size=8192 \
--max-requests=100000 --file-io-mode=sync [prepare|run]
Results:
sequential writes
Throughput before this change: 65.71Mb/sec (average of 10 runs)
Throughput after this change: 66.58Mb/sec (average of 10 runs)
random writes
Throughput before this change: 10.75Mb/sec (average of 10 runs)
Throughput after this change: 11.56Mb/sec (average of 10 runs)
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Just wrap same code into one function scrub_blocked_if_needed().
This make a change that we will move waiting (@workers_pending = 0)
before we can wake up commiting transaction(atomic_inc(@scrub_paused)),
we must take carefully to not deadlock here.
Thread 1 Thread 2
|->btrfs_commit_transaction()
|->set trans type(COMMIT_DOING)
|->btrfs_scrub_paused()(blocked)
|->join_transaction(blocked)
Move btrfs_scrub_paused() before setting trans type which means we can
still join a transaction when commiting_transaction is blocked.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Suggested-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We came a race condition when scrubbing superblocks, the story is:
In commiting transaction, we will update @last_trans_commited after
writting superblocks, if scrubber start after writting superblocks
and before updating @last_trans_commited, generation mismatch happens!
We fix this by checking @scrub_pause_req, and we won't start a srubber
until commiting transaction is finished.(after btrfs_scrub_continue()
finished.)
Reported-by: Sebastian Ochmann <ochmann@informatik.uni-bonn.de>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
fs/btrfs/send.c:2190:9: warning: incorrect type in argument 3 (different base types)
fs/btrfs/send.c:2190:9: expected unsigned long long [unsigned] [usertype] value
fs/btrfs/send.c:2190:9: got restricted __le64 [usertype] ctransid
fs/btrfs/send.c:2195:17: warning: incorrect type in argument 3 (different base types)
fs/btrfs/send.c:2195:17: expected unsigned long long [unsigned] [usertype] value
fs/btrfs/send.c:2195:17: got restricted __le64 [usertype] ctransid
fs/btrfs/send.c:3716:9: warning: incorrect type in argument 3 (different base types)
fs/btrfs/send.c:3716:9: expected unsigned long long [unsigned] [usertype] value
fs/btrfs/send.c:3716:9: got restricted __le64 [usertype] ctransid
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When merging an extent_map with its right neighbor, increment
its block_len with the neighbor's block_len.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
[commit 8185554d: fix incorrect inode acl reset] introduced a dead
code by adding a condition which can never be true to an else
branch. The condition can never be true because it is already
checked by a previous if statement which causes function to return.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Reviewed-By: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We were accounting for sizeof(struct btrfs_item) twice, once
in the data_size variable and another time in the if statement
below.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently we do 2 traversals of an inode's extent_io_tree
before inserting an extent state structure: 1 to see if a
matching extent state already exists and 1 to do the insertion
if the fist traversal didn't found such extent state.
This change just combines those tree traversals into a single one.
While running sysbench tests (random writes) I captured the number
of elements in extent_io_tree trees for a while (into a procfs file
backed by a seq_list from seq_file module) and got this histogram:
Count: 9310
Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688
Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000
51.000 - 93.933: 693 ########
93.933 - 172.314: 938 ##########
172.314 - 315.408: 856 #########
315.408 - 576.646: 95 #
576.646 - 6415.830: 888 ##########
6415.830 - 11713.809: 1024 ###########
11713.809 - 21386.000: 4816 #####################################################
So traversing such trees can take some significant time that can
easily be avoided.
Ran the following sysbench tests, 5 times each, for sequential and
random writes, and got the following results:
sysbench --test=fileio --file-num=1 --file-total-size=2G \
--file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \
--max-requests=0 --max-time=60 --file-io-mode=sync
sysbench --test=fileio --file-num=1 --file-total-size=2G \
--file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \
--max-requests=0 --max-time=60 --file-io-mode=sync
Before this change:
sequential writes: 69.28Mb/sec (average of 5 runs)
random writes: 4.14Mb/sec (average of 5 runs)
After this change:
sequential writes: 69.91Mb/sec (average of 5 runs)
random writes: 5.69Mb/sec (average of 5 runs)
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we didn't find a matching extent state, we inserted a new one
but didn't cache it in the **cached_state parameter, which makes a
subsequent call do a tree lookup to get it.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Before this change, adding an extent map to the extent map tree of an
inode required 2 tree nevigations:
1) doing a tree navigation to search for an existing extent map starting
at the same offset or an extent map that overlaps the extent map we
want to insert;
2) Another tree navigation to add the extent map to the tree (if the
former tree search didn't found anything).
This change just merges these 2 steps into a single one.
While running first few btrfs xfstests I had noticed these trees easily
had a few hundred elements, and then with the following sysbench test it
reached over 1100 elements very often.
Test:
sysbench --test=fileio --file-num=32 --file-total-size=10G \
--file-test-mode=seqwr --num-threads=512 --file-block-size=8192 \
--max-requests=1000000 --file-io-mode=sync [prepare|run]
(fs created with mkfs.btrfs -l 4096 -f /dev/sdb3 before each sysbench
prepare phase)
Before this patch:
run 1 - 41.894Mb/sec
run 2 - 40.527Mb/sec
run 3 - 40.922Mb/sec
run 4 - 49.433Mb/sec
run 5 - 40.959Mb/sec
average - 42.75Mb/sec
After this patch:
run 1 - 48.036Mb/sec
run 2 - 50.21Mb/sec
run 3 - 50.929Mb/sec
run 4 - 46.881Mb/sec
run 5 - 53.192Mb/sec
average - 49.85Mb/sec
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When attempting to move items from our target leaf to its neighbor
leaves (right and left), we only need to free data_size - free_space
bytes from our leaf in order to add the new item (which has size of
data_size bytes). Therefore attempt to move items to the right and
left leaves if they have at least data_size - free_space bytes free,
instead of data_size bytes free.
After 5 runs of the following test, I got a smaller number of btree
node splits overall:
sysbench --test=fileio --file-num=512 --file-total-size=5G \
--file-test-mode=seqwr --num-threads=512 \
--file-block-size=8192 --max-requests=100000 --file-io-mode=sync
Before this change:
* 6171 splits (average of 5 test runs)
* 61.508Mb/sec of throughput (average of 5 test runs)
After this change:
* 6036 splits (average of 5 test runs)
* 63.533Mb/sec of throughput (average of 5 test runs)
An ideal test would not just have multiple threads/processes writing
to a file (insertion of file extent items) but also do other operations
that result in insertion of items with varied sizes, like file/directory
creations, creation of links, symlinks, xattrs, etc.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
After an ordered extent completes, don't blindly reset the
inode's ordered tree last accessed ordered extent pointer.
While running the xfstests I noticed that about 29% of the
time the ordered extent to which tree->last pointed was not
the same as our just completed ordered extent. After that I
ran the following sysbench test (after a prepare phase) and
noticed that about 68% of the time tree->last pointed to
a different ordered extent too.
sysbench --test=fileio --file-num=32 --file-total-size=4G \
--file-test-mode=rndwr --num-threads=512 \
--file-block-size=32768 --max-time=60 --max-requests=0 run
Therefore reset tree->last on ordered extent removal only if
it pointed to the ordered extent we're removing from the tree.
Results from 4 runs of the following test before and after
applying this patch:
$ sysbench --test=fileio --file-num=32 --file-total-size=4G \
--file-test-mode=seqwr --num-threads=512 \
--file-block-size=32768 --max-time=60 --file-io-mode=sync prepare
$ sysbench --test=fileio --file-num=32 --file-total-size=4G \
--file-test-mode=seqwr --num-threads=512 \
--file-block-size=32768 --max-time=60 --file-io-mode=sync run
Before this path:
run 1 - 64.049Mb/sec
run 2 - 63.455Mb/sec
run 3 - 64.656Mb/sec
run 4 - 63.833Mb/sec
After this patch:
run 1 - 66.149Mb/sec
run 2 - 68.459Mb/sec
run 3 - 66.338Mb/sec
run 4 - 66.176Mb/sec
With random writes (--file-test-mode=rndwr) I had huge fluctuations
on the results (+- 35% easily).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Filipe noticed that we were leaking the features attribute group
after umount. His fix of just calling sysfs_remove_group() wasn't enough
since that removes just the supported features and not the unsupported
features.
This patch changes the unknown feature handling to add them individually
so we can skip the kmalloc and uses the same iteration to tear them down
later.
We also fix the error handling during mount so that we catch the
failing creation of the per-super kobject, and handle proper teardown
of a half-setup sysfs context.
Tested properly with kmemleak enabled this time.
Reported-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Tested-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch fixes the following warnings:
fs/btrfs/extent-tree.c:6201:12: sparse: symbol 'get_raid_name' was not declared. Should it be static?
fs/btrfs/extent-tree.c:8430:9: error: format not a string literal and no format arguments [-Werror=format-security] get_raid_name(index));
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The inode eviction can be very slow, because during eviction we
tell the VFS to truncate all of the inode's pages. This results
in calls to btrfs_invalidatepage() which in turn does calls to
lock_extent_bits() and clear_extent_bit(). These calls result in
too many merges and splits of extent_state structures, which
consume a lot of time and cpu when the inode has many pages. In
some scenarios I have experienced umount times higher than 15
minutes, even when there's no pending IO (after a btrfs fs sync).
A quick way to reproduce this issue:
$ mkfs.btrfs -f /dev/sdb3
$ mount /dev/sdb3 /mnt/btrfs
$ cd /mnt/btrfs
$ sysbench --test=fileio --file-num=128 --file-total-size=16G \
--file-test-mode=seqwr --num-threads=128 \
--file-block-size=16384 --max-time=60 --max-requests=0 run
$ time btrfs fi sync .
FSSync '.'
real 0m25.457s
user 0m0.000s
sys 0m0.092s
$ cd ..
$ time umount /mnt/btrfs
real 1m38.234s
user 0m0.000s
sys 1m25.760s
The same test on ext4 runs much faster:
$ mkfs.ext4 /dev/sdb3
$ mount /dev/sdb3 /mnt/ext4
$ cd /mnt/ext4
$ sysbench --test=fileio --file-num=128 --file-total-size=16G \
--file-test-mode=seqwr --num-threads=128 \
--file-block-size=16384 --max-time=60 --max-requests=0 run
$ sync
$ cd ..
$ time umount /mnt/ext4
real 0m3.626s
user 0m0.004s
sys 0m3.012s
After this patch, the unmount (inode evictions) is much faster:
$ mkfs.btrfs -f /dev/sdb3
$ mount /dev/sdb3 /mnt/btrfs
$ cd /mnt/btrfs
$ sysbench --test=fileio --file-num=128 --file-total-size=16G \
--file-test-mode=seqwr --num-threads=128 \
--file-block-size=16384 --max-time=60 --max-requests=0 run
$ time btrfs fi sync .
FSSync '.'
real 0m26.774s
user 0m0.000s
sys 0m0.084s
$ cd ..
$ time umount /mnt/btrfs
real 0m1.811s
user 0m0.000s
sys 0m1.564s
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We hit a forever loop when doing balance relocation,the reason
is that we firstly reserve 4M(node size is 16k).and within transaction
we will try to add extra reservation for snapshot roots,this will
return -EAGAIN if there has been a thread flushing space to reserve
space.We will do this again and again with filesystem becoming nearly
full.
If the above '-EAGAIN' case happens, we try to refill reservation more
outsize of transaction, and this will return eariler in enospc case,however,
this dosen't really hurt because it makes no sense doing balance relocation
with the filesystem nearly full.
Miao Xie helped a lot to track this issue, thanks.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
If the ordered extent's last byte was 1 less than our region's
start byte, we would unnecessarily wait for the completion of
that ordered extent, because it doesn't intersect our target
range.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we ran sysbench on the fs with compression, the following WARN_ONs were
triggered:
fs/btrfs/inode.c:7829 WARN_ON(BTRFS_I(inode)->outstanding_extents);
fs/btrfs/inode.c:7830 WARN_ON(BTRFS_I(inode)->reserved_extents);
fs/btrfs/inode.c:7832 WARN_ON(BTRFS_I(inode)->csum_bytes);
Steps to reproduce:
# mkfs.btrfs -f <dev>
# mount -o compress <dev> <mnt>
# cd <mnt>
# sysbench --test=fileio --num-threads=8 --file-total-size=8G \
> --file-block-size=32K --file-io-mode=rndwr --file-fsync-freq=0 \
> --file-fsync-end=no --max-requests=300000 --file-extra-flags=direct \
> --file-test-mode=sync prepare
# cd -
# umount <mnt>
# mount -o compress <dev> <mnt>
# cd <mnt>
# sysbench --test=fileio --num-threads=8 --file-total-size=8G \
> --file-block-size=32K --file-io-mode=rndwr --file-fsync-freq=0 \
> --file-fsync-end=no --max-requests=300000 --file-extra-flags=direct \
> --file-test-mode=sync run
# cd -
# umount <mnt>
The reason of this problem is:
Task0 Task1
btrfs_direct_IO
unlock(&inode->i_mutex)
lock(&inode->i_mutex)
reserve_space()
prepare_pages()
lock_extent()
clear_extent()
unlock_extent()
lock_extent()
test_extent(uptodate)
return false
copy_data()
set_delalloc_extent()
extent need compress
go back to buffered write
clear_extent(DELALLOC | DIRTY)
unlock_extent()
Task 0 and 1 wrote the same place, and task0 cleared the delalloc flag which
was set by task1, it made the dirty pages in that extents couldn't be flushed
into the disk, so the reserved space for that extent was not released at
the end.
This patch fixes the above bug by unlocking the extent after the delalloc.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
- the caller has gotten the inode object, needn't pass the file object.
And if so, we needn't define a inode pointer variant.
- the position should be aligned by the page size not sector size, so
we also needn't pass the root object into prepare_pages().
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We don't need to crash hard here, it's just reading a sysfs file. The
values considered in switch are from a fixed set, the default case
should not happen at all.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Added in patch "btrfs: add ability to change features via sysfs",
modifications to superblock don't need to reserve metadata blocks when
starting a transaction.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The kernel macro pr_debug is defined as a empty statement when DEBUG is
not defined. Make btrfs_debug match pr_debug to avoid spamming
the kernel log with debug messages
Signed-off-by: Frank Holton <fholton@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Found by uselex.rb:
> btrfs_get_inode_ref_index: [R]: exported from:
fs/btrfs/inode-item.o fs/btrfs/btrfs.o fs/btrfs/built-in.o
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: David Stebra <dsterba@suse.cz>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This is the third step in bootstrapping the btrfs_find_item interface.
The function find_orphan_item(), in orphan.c, is similar to the two
functions already replaced by the new interface. It uses two parameters,
which are already present in the interface, and is nearly identical to
the function brought in in the previous patch.
Replace the two calls to find_orphan_item() with calls to
btrfs_find_item(), with the defined objectid and type that was used
internally by find_orphan_item(), a null path, and a null key. Add a
test for a null path to btrfs_find_item, and if it passes, allocate and
free the path. Finally, remove find_orphan_item().
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch is the second step in bootstrapping the btrfs_find_item
interface. The btrfs_find_root_ref() is similar to the former
__inode_info(); it accepts four of its parameters, and duplicates the
first half of its functionality.
Replace the one former call to btrfs_find_root_ref() with a call to
btrfs_find_item(), along with the defined key type that was used
internally by btrfs_find_root ref, and a null found key. In
btrfs_find_item(), add a test for the null key at the place where
the functionality of btrfs_find_root_ref() ends; btrfs_find_item()
then returns if the test passes. Finally, remove btrfs_find_root_ref().
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Zach Brown <zab@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
There are many btrfs functions that manually search the tree for an
item. They all reimplement the same mechanism and differ in the
conditions that they use to find the item. __inode_info() is one such
example. Zach Brown proposed creating a new interface to take the place
of these functions.
This patch is the first step to creating the interface. A new function,
btrfs_find_item, has been added to ctree.c and prototyped in ctree.h.
It is identical to __inode_info, except that the order of the parameters
has been rearranged to more closely those of similar functions elsewhere
in the code (now, root and path come first, then the objectid, offset
and type, and the key to be filled in last). __inode_info's callers have
been set to call this new function instead, and __inode_info itself has
been removed.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Zach Brown <zab@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Use otherwise unused local variables slot in update_qgroup_limit_item and
in update_qgroup_info_item, and remove unused variable ins from
btrfs_qgroup_account_ref.
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
The variable window_start in setup_cluster_no_bitmap is not used since commit
1bb91902dc
(Btrfs: revamp clustered allocation logic)
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Remove unused variables:
* tree from end_bio_extent_writepage,
* item from extent_fiemap.
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
The variable found_uncached_bg in find_free_extent is not used since commit
285ff5af6c
(Btrfs: remove the ideal caching code)
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Remove unused variables:
* tree from csum_dirty_buffer,
* tree from btree_readpage_end_io_hook,
* tree from btree_writepages,
* bytenr from btrfs_create_tree,
* fs_info from end_workqueue_fn.
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Variable owner in btrfs_new_inode is unused since commit
d82a6f1d7e
(Btrfs: kill BTRFS_I(inode)->block_group)
Signed-off-by: Valentina Giusti <valentina.giusti@microon.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This adds a writeable attribute which describes the label.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Now that we have the infrastructure for per-super attributes, we can
publish device membership in /sys/fs/btrfs/<fsid>/devices. The information
is published as symlinks to the block devices.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
While trying to debug ENOSPC issues, it's helpful to understand what the
kernel's view of the available space is. We export this information
via ioctl, but sysfs files are more easily used.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs filesystem df output will show the size of the metadata space
and how much of it is used, and the user assumes that the difference
is all usable space. Since that's not actually the case due to the
global metadata reservation, we should provide the full picture to the
user.
This patch adds an ioctl that exports the size of the global metadata
reservation so that btrfs filesystem df can report it.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Now that we have the feature name strings available in the kernel via
the sysfs attributes, we can use them for printing better failure
messages from the ioctl path.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch adds the ability to change (set/clear) features while the file
system is mounted. A bitmask is added for each feature set for the
support to set and clear the bits. A message indicating which bit
has been set or cleared is issued when it's been changed and also when
permission or support for a particular bit has been denied.
Since the the attributes can now be writable, we need to introduce
another struct attribute to hold the different permissions.
If neither set or clear is supported, the file will have 0444 permissions.
If either set or clear is supported, the file will have 0644 permissions
and the store handler will filter out the write based on the bitmask.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
With the compat and compat-ro bits, it's possible for file systems to
exist that have features that aren't supported by the kernel's file system
implementation yet still be mountable.
This patch publishes read-only info on those features using a prefix:number
format, where the number is the bit number rather than the shifted value.
e.g. "compat:12"
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch publishes information on which features are enabled in the
file system on a per-super basis. At this point, it only publishes
information on features supported by the file system implementation.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch adds per-super attributes to sysfs.
It doesn't publish any attributes yet, but does the proper lifetime
handling as well as the basic infrastructure to add new attributes.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch adds the ability to publish supported features to sysfs under
/sys/fs/btrfs/features.
The files are module-wide and export which features the kernel supports.
The content, for now, is just "0\n".
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
There are some feature bits that require no offline setup and can
be enabled online. I've only reviewed extended irefs, but there will
probably be more.
We introduce three new ioctls:
- BTRFS_IOC_GET_SUPPORTED_FEATURES: query the kernel for supported features.
- BTRFS_IOC_GET_FEATURES: query the kernel for enabled features on a per-fs
basis, as well as querying for which features are changeable with mounted.
- BTRFS_IOC_SET_FEATURES: change features on a per-fs basis.
We introduce two new masks per feature set (_SAFE_SET and _SAFE_CLEAR) that
allow us to define which features are safe to change at runtime.
The failure modes for BTRFS_IOC_SET_FEATURES are as follows:
- Enabling a completely unsupported feature: warns and returns -ENOTSUPP
- Enabling a feature that can only be done offline: warns and returns -EPERM
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we have data deduplication on, we'll hang on the merge part
because it needs to verify every queued delayed data refs related to
this disk offset but we may have millions refs.
And in the case of delayed data refs, we don't usually have too much
data refs to merge.
So it's safe to shut it down for data refs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
The way how we process delayed refs is
1) get a bunch of head refs,
2) pick up one head ref,
3) go one node back for any delayed ref updates.
The head ref is also linked in the same rbtree as the delayed ref is,
so in 1) stage, we have to walk one by one including not only head refs, but
delayed refs.
When we have a great number of delayed refs pending to process,
this'll cost time a lot.
Here we introduce a head ref specific rbtree, it only has head refs, so troubles
go away.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
We were looking at file_extent_num_bytes unconditionally when looking at
referenced data bytes, but this isn't correct for compression. Fix this by
checking the compression of the file extent we are and setting num_bytes to
disk_num_bytes in the case of compression so that we are marking the proper
bytes as referenced. This fixes check_int_data freaking out when running
btrfs/004. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs has always had these filler extent data items for holes in inodes. This
has made somethings very easy, like logging hole punches and sending hole
punches. However for large holey files these extent data items are pure
overhead. So add an incompatible feature to no longer add hole extents to
reduce the amount of metadata used by these sort of files. This has a few
changes for logging and send obviously since they will need to detect holes and
log/send the holes if there are any. I've tested this thoroughly with xfstests
and it doesn't cause any issues with and without the incompat format set.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
If the setting of NFS_INO_INVALIDATING gets reordered to before the
clearing of NFS_INO_INVALID_DATA, then another task may hit a race
window where both appear to be clear, even though the inode's pages are
still in need of invalidation. Fix this by adding the appropriate memory
barriers.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull ceph updates from Sage Weil:
"This is a big batch. From Ilya we have:
- rbd support for more than ~250 mapped devices (now uses same scheme
that SCSI does for device major/minor numbering)
- crush updates for new mapping behaviors (will be needed for coming
erasure coding support, among other things)
- preliminary support for tiered storage pools
There is also a big series fixing a pile cephfs bugs with clustered
MDSs from Yan Zheng, ACL support for cephfs from Guangliang Zhao, ceph
fscache improvements from Li Wang, improved behavior when we get
ENOSPC from Josh Durgin, some readv/writev improvements from
Majianpeng, and the usual mix of small cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (76 commits)
ceph: cast PAGE_SIZE to size_t in ceph_sync_write()
ceph: fix dout() compile warnings in ceph_filemap_fault()
libceph: support CEPH_FEATURE_OSD_CACHEPOOL feature
libceph: follow redirect replies from osds
libceph: rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid}
libceph: follow {read,write}_tier fields on osd request submission
libceph: add ceph_pg_pool_by_id()
libceph: CEPH_OSD_FLAG_* enum update
libceph: replace ceph_calc_ceph_pg() with ceph_oloc_oid_to_pg()
libceph: introduce and start using oid abstraction
libceph: rename MAX_OBJ_NAME_SIZE to CEPH_MAX_OID_NAME_LEN
libceph: move ceph_file_layout helpers to ceph_fs.h
libceph: start using oloc abstraction
libceph: dout() is missing a newline
libceph: add ceph_kv{malloc,free}() and switch to them
libceph: support CEPH_FEATURE_EXPORT_PEER
ceph: add imported caps when handling cap export message
ceph: add open export target session helper
ceph: remove exported caps when handling cap import message
ceph: handle session flush message
...
Pull exofs and ore fixes from Boaz Harrosh:
"The main fix here, the first patch, is also destined for -stable. The
rest is small trivia and cosmetics. The ORE patches effect both exofs
and pnfs-objects very reproducible bugs"
[ ORE is "object raid engine", used by exofs and pnfs - Linus ]
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
exofs: Print less in r4w
exofs: Allow corrupted directory entry to be empty file
exofs: Allow O_DIRECT open
ore: Don't crash on NULL bio in _clear_bio
ore: Fix wrong math in allocation of per device BIO
Use min_t(size_t, ...) instead of plain min(), which does strict type
checking, to avoid compile warning on i386.
Cc: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
PAGE_CACHE_SIZE is unsigned long on all architectures, however size_t
is either unsigned int or unsigned long. Rather than change format
strings, cast PAGE_CACHE_SIZE to size_t to be in line with dout()s in
ceph_page_mkwrite().
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
functionality for bigalloc file systems.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ofDv
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Bug fixes and cleanups for ext4. We also enable the punch hole
functionality for bigalloc file systems"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: delete "set but not used" variables
ext4: don't pass freed handle to ext4_walk_page_buffers
ext4: avoid clearing beyond i_blocks when truncating an inline data file
ext4: ext4_inode_is_fast_symlink should use EXT4_CLUSTER_SIZE
ext4: fix a typo in extents.c
ext4: use %pd printk specificer
ext4: standardize error handling in ext4_da_write_inline_data_begin()
ext4: retry allocation when inline->extent conversion failed
ext4: enable punch hole for bigalloc
Highlights include:
- Stable fix for an infinite loop in RPC state machine
- Stable fix for a use after free situation in the NFSv4 trunking discovery
- Stable fix for error handling in the NFSv4 trunking discovery
- Stable fix for the page write update code
- Stable fix for the NFSv4.1 mount time security negotiation
- Stable fix for the NFSv4 open code.
- O_DIRECT locking fixes
- fix an Oops in the pnfs file commit code
- RPC layer needs finer grained handling of connection errors
- More RPC GSS upcall fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=abfY
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- stable fix for an infinite loop in RPC state machine
- stable fix for a use after free situation in the NFSv4 trunking discovery
- stable fix for error handling in the NFSv4 trunking discovery
- stable fix for the page write update code
- stable fix for the NFSv4.1 mount time security negotiation
- stable fix for the NFSv4 open code.
- O_DIRECT locking fixes
- fix an Oops in the pnfs file commit code
- RPC layer needs finer grained handling of connection errors
- more RPC GSS upcall fixes"
* tag 'nfs-for-3.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (30 commits)
pnfs: Proper delay for NFS4ERR_RECALLCONFLICT in layout_get_done
pnfs: fix BUG in filelayout_recover_commit_reqs
nfs4: fix discover_server_trunking use after free
NFSv4.1: Handle errors correctly in nfs41_walk_client_list
nfs: always make sure page is up-to-date before extending a write to cover the entire page
nfs: page cache invalidation for dio
nfs: take i_mutex during direct I/O reads
nfs: merge nfs_direct_write into nfs_file_direct_write
nfs: merge nfs_direct_read into nfs_file_direct_read
nfs: increment i_dio_count for reads, too
nfs: defer inode_dio_done call until size update is done
nfs: fix size updates for aio writes
nfs4.1: properly handle ENOTSUP in SECINFO_NO_NAME
NFSv4.1: Fix a race in nfs4_write_inode
NFSv4.1: Don't trust attributes if a pNFS LAYOUTCOMMIT is outstanding
point to the right include file in a comment (left over from a9004abc3)
NFS: dprintk() should not print negative fileids and inode numbers
nfs: fix dead code of ipv6_addr_scope
sunrpc: Fix infinite loop in RPC state machine
SUNRPC: Add tracepoint for socket errors
...
Pull vfs updates from Al Viro:
"Assorted stuff; the biggest pile here is Christoph's ACL series. Plus
assorted cleanups and fixes all over the place...
There will be another pile later this week"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits)
__dentry_path() fixes
vfs: Remove second variable named error in __dentry_path
vfs: Is mounted should be testing mnt_ns for NULL or error.
Fix race when checking i_size on direct i/o read
hfsplus: remove can_set_xattr
nfsd: use get_acl and ->set_acl
fs: remove generic_acl
nfs: use generic posix ACL infrastructure for v3 Posix ACLs
gfs2: use generic posix ACL infrastructure
jfs: use generic posix ACL infrastructure
xfs: use generic posix ACL infrastructure
reiserfs: use generic posix ACL infrastructure
ocfs2: use generic posix ACL infrastructure
jffs2: use generic posix ACL infrastructure
hfsplus: use generic posix ACL infrastructure
f2fs: use generic posix ACL infrastructure
ext2/3/4: use generic posix ACL infrastructure
btrfs: use generic posix ACL infrastructure
fs: make posix_acl_create more useful
fs: make posix_acl_chmod more useful
...
Commit d529ef83c3 (NFS: fix the handling
of NFS_INO_INVALID_DATA flag in nfs_revalidate_mapping) introduces
a potential race, since it doesn't test the value of nfsi->cache_validity
and set the bitlock in nfsi->flags atomically.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Jeff Layton <jlayton@redhat.com>
Commit 91c2e0bcae ("unify compat fanotify_mark(2), switch to
COMPAT_SYSCALL_DEFINE") added a new unified compat fanotify_mark syscall
to be used by all architectures.
Unfortunately the unified version merges the split mask parameter in a
wrong way: the lower and higher word got swapped.
This was discovered with glibc's tst-fanotify test case.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Andreas Krebbel <krebbel@linux.vnet.ibm.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: <stable@vger.kernel.org> [3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suppress log message like this: (open_delete,8328,0):ocfs2_unlink:951
ERROR: status = -2
Orabug:17445485
Signed-off-by: Xiaowei Hu <xiaowei.hu@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CLAIM_FH was added by NFSv4.1. It is the same as CLAIM_NULL except that it
uses only current FH to identify the file to be opened.
The NFS client is using CLAIM_FH if the FH is available when opening a file.
Currently, we cannot get any delegation if we stat a file before open it
because the server delegation code does not recognize CLAIM_FH.
We tested this patch and found delegation can be handed out now when claim is
CLAIM_FH.
See http://marc.info/?l=linux-nfs&m=136369847801388&w=2 and
http://www.linux-nfs.org/wiki/index.php/Server_4.0_and_4.1_issues#New_open_claim_types
Signed-off-by: Ming Chen <mchen@cs.stonybrook.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Switch ceph_calc_ceph_pg() to new oloc and oid abstractions and rename
it to ceph_oloc_oid_to_pg() to make its purpose more clear.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
The original printk() made sense when the GSSAPI codepaths were called
only when sec=krb5* was explicitly requested. Now however, in many cases
the nfs client will try to acquire GSSAPI credentials by default, even
when it's not requested.
Since we don't have a great mechanism to distinguish between the two
cases, just turn the pr_warn into a dprintk instead. With this change we
can also get rid of the ratelimiting.
We do need to keep the EXPORT_SYMBOL(gssd_running) in place since
auth_gss.ko needs it and sunrpc.ko provides it. We can however,
eliminate the gssd_running call in the nfs code since that's a bit of a
layering violation.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
There is a possible race in how the nfs_invalidate_mapping function is
handled. Currently, we go and invalidate the pages in the file and then
clear NFS_INO_INVALID_DATA.
The problem is that it's possible for a stale page to creep into the
mapping after the page was invalidated (i.e., via readahead). If another
writer comes along and sets the flag after that happens but before
invalidate_inode_pages2 returns then we could clear the flag
without the cache having been properly invalidated.
So, we must clear the flag first and then invalidate the pages. Doing
this however, opens another race:
It's possible to have two concurrent read() calls that end up in
nfs_revalidate_mapping at the same time. The first one clears the
NFS_INO_INVALID_DATA flag and then goes to call nfs_invalidate_mapping.
Just before calling that though, the other task races in, checks the
flag and finds it cleared. At that point, it trusts that the mapping is
good and gets the lock on the page, allowing the read() to be satisfied
from the cache even though the data is no longer valid.
These effects are easily manifested by running diotest3 from the LTP
test suite on NFS. That program does a series of DIO writes and buffered
reads. The operations are serialized and page-aligned but the existing
code fails the test since it occasionally allows a read to come out of
the cache incorrectly. While mixing direct and buffered I/O isn't
recommended, I believe it's possible to hit this in other ways that just
use buffered I/O, though that situation is much harder to reproduce.
The problem is that the checking/clearing of that flag and the
invalidation of the mapping really need to be atomic. Fix this by
serializing concurrent invalidations with a bitlock.
At the same time, we also need to allow other places that check
NFS_INO_INVALID_DATA to check whether we might be in the middle of
invalidating the file, so fix up a couple of places that do that
to look for the new NFS_INO_INVALIDATING flag.
Doing this requires us to be careful not to set the bitlock
unnecessarily, so this code only does that if it believes it will
be doing an invalidation.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If a file is unlinked or renamed between the time when we do the local
open and the time when we get the delegation, then we will return to the
client indicating that it holds a delegation even though the file no
longer exists under the name it was open under.
But a client performing an open-by-name, when it is returned a
delegation, must be able to assume that the file is still linked at the
name it was opened under.
So, hold the parent i_mutex for longer to prevent concurrent renames or
unlinks.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is basically a no-op, to simplify a following patch.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As far as I can tell, this list is used only under the state lock, so we
may as well do this in the simpler order.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently we support ACLs if the NFS server file system supports both
ALLOW and DENY ACE types. This patch makes the Linux client work with
ACLs even if the server supports only 'ALLOW' ACE type.
Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When mounting with smb2 (or smb2.1 or smb3) we need to check to make
sure that attempts to query or set extended attributes do not
attempt to send the request with the older cifs protocol instead
(eventually we also need to add the support in SMB2
to query/set extended attributes but this patch prevents us from
using the wrong protocol for extended attribute operations).
Signed-off-by: Steve French <smfrench@gmail.com>
Pull UML changes from Richard Weinberger:
"This time only various cleanups and housekeeping patches"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: hostfs: make functions static
um: Include generic barrier.h
um: Removed unused attributes from thread_struct
Included are a new cache model for support of mmap,
and several cleanups across the filesystem and networking
portions of the code.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
Comment: GPGTools - http://gpgtools.org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=tCej
-----END PGP SIGNATURE-----
Merge tag 'for-3.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p changes from Eric Van Hensbergen:
"Included are a new cache model for support of mmap, and several
cleanups across the filesystem and networking portions of the code"
* tag 'for-3.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9p: update documentation
9P: introduction of a new cache=mmap model.
net/9p: remove virtio default hack and set appropriate bits instead
9p: remove useless 'name' variable and assignment
9p: fix return value in case in v9fs_fid_xattr_set()
9p: remove useless variable and assignment
9p: remove useless assignment
9p: remove unused 'super_block' struct pointer
9p: remove never used return variable
9p: remove unused 'p9_fid' struct pointer
9p: remove unused 'p9_client' struct pointer
* we need to save the starting point for restarts
* reject pathologically short buffers outright
Spotted-by: Denys Vlasenko <dvlasenk@redhat.com>
Spotted-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In commit 232d2d60aa
Author: Waiman Long <Waiman.Long@hp.com>
Date: Mon Sep 9 12:18:13 2013 -0400
dcache: Translating dentry into pathname without taking rename_lock
The __dentry_path locking was changed and the variable error was
intended to be moved outside of the loop. Unfortunately the inner
declaration of error was not removed. Resulting in a version of
__dentry_path that will never return an error.
Remove the problematic inner declaration of error and allow
__dentry_path to return errors once again.
Cc: stable@vger.kernel.org
Cc: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A bug was introduced with the is_mounted helper function in
commit f7a99c5b7c
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Jun 9 00:59:08 2012 -0400
get rid of ->mnt_longterm
it's enough to set ->mnt_ns of internal vfsmounts to something
distinct from all struct mnt_namespace out there; then we can
just use the check for ->mnt_ns != NULL in the fast path of
mntput_no_expire()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The intent was to test if the real_mount(vfsmount)->mnt_ns was
NULL_OR_ERR but the code is actually testing real_mount(vfsmount)
and always returning true.
The result is d_absolute_path returning paths it should be hiding.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
So far I've had one ACK for this, and no other comments. So I think it
is probably time to send this via some suitable tree. I'm guessing that
the vfs tree would be the most appropriate route, but not sure that
there is one at the moment (don't see anything recent at kernel.org)
so in that case I think -mm is the "back up plan". Al, please let me
know if you will take this?
Steve.
---------------------
Following on from the "Re: [PATCH v3] vfs: fix a bug when we do some dio
reads with append dio writes" thread on linux-fsdevel, this patch is my
current version of the fix proposed as option (b) in that thread.
Removing the i_size test from the direct i/o read path at vfs level
means that filesystems now have to deal with requests which are beyond
i_size themselves. These I've divided into three sets:
a) Those with "no op" ->direct_IO (9p, cifs, ceph)
These are obviously not going to be an issue
b) Those with "home brew" ->direct_IO (nfs, fuse)
I've been told that NFS should not have any problem with the larger
i_size, however I've added an extra test to FUSE to duplicate the
original behaviour just to be on the safe side.
c) Those using __blockdev_direct_IO()
These call through to ->get_block() which should deal with the EOF
condition correctly. I've verified that with GFS2 and I believe that
Zheng has verified it for ext4. I've also run the test on XFS and it
passes both before and after this change.
The part of the patch in filemap.c looks a lot larger than it really is
- there are only two lines of real change. The rest is just indentation
of the contained code.
There remains a test of i_size though, which was added for btrfs. It
doesn't cause the other filesystems a problem as the test is performed
after ->direct_IO has been called. It is possible that there is a race
that does matter to btrfs, however this patch doesn't change that, so
its still an overall improvement.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: Zheng Liu <gnehzuil.liu@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When using the per-superblock xattr handlers permission checking is
done by the generic code. hfsplus just needs to check for the magic
osx attribute not to leak into protected namespaces.
Also given that the code was obviously copied from JFS the proper
attribution was missing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the boilerplate code to marshall and unmarhall ACL objects into
xattrs and operate on the posix_acl objects directly. Also move all
the ACL handling code into nfs?acl.c where it belongs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
And instead convert tmpfs to use the new generic ACL code, with two stub
methods provided for in-memory filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This causes a small behaviour change in that we don't bother to set
ACLs on file creation if the mode bit can express the access permissions
fully, and thus behaving identical to local filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The hostfs_*() callback functions are all only used within
hostfs_kern.c, so make them static.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: user-mode-linux-devel@lists.sourceforge.net
Signed-off-by: Richard Weinberger <richard@nod.at>
This contains some major refactoring for the create path so that
inodes are created with the right mode to start with instead of
fixing it up later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Copy the scheme I introduced to btrfs many years ago to only use the
xattr handler for ACLs, but pass plain attrs straight through.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Also don't bother to set up a .get_acl method for symlinks as we do not
support access control (ACLs or even mode bits) for symlinks in Linux,
and create inodes with the proper mode instead of fixing it up later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Also don't bother to set up a .get_acl method for symlinks as we do not
support access control (ACLs or even mode bits) for symlinks in Linux.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This contains some major refactoring for the create path so that
inodes are created with the right mode to start with instead of
fixing it up later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Also don't bother to set up a .get_acl method for symlinks as we do not
support access control (ACLs or even mode bits) for symlinks in Linux.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
f2fs has some weird mode bit handling, so still using the old
chmod code for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Also don't bother to set up a .get_acl method for symlinks as we do not
support access control (ACLs or even mode bits) for symlinks in Linux.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the current posix_acl_created to __posix_acl_create and add
a fully featured helper to set up the ACLs on file creation that
uses get_acl().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the current posix_acl_chmod to __posix_acl_chmod and add
a fully featured ACL chmod helper that uses the ->set_acl inode
operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With the ->set_acl inode operation we can implement the Posix ACL
xattr handlers in generic code instead of duplicating them all
over the tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Factor out the code to get an ACL either from the inode or disk from
check_acl, so that it can be used elsewhere later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull networking updates from David Miller:
1) BPF debugger and asm tool by Daniel Borkmann.
2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.
3) Correct reciprocal_divide and update users, from Hannes Frederic
Sowa and Daniel Borkmann.
4) Currently we only have a "set" operation for the hw timestamp socket
ioctl, add a "get" operation to match. From Ben Hutchings.
5) Add better trace events for debugging driver datapath problems, also
from Ben Hutchings.
6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we
have a small send and a previous packet is already in the qdisc or
device queue, defer until TX completion or we get more data.
7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.
8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
Borkmann.
9) Share IP header compression code between Bluetooth and IEEE802154
layers, from Jukka Rissanen.
10) Fix ipv6 router reachability probing, from Jiri Benc.
11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.
12) Support tunneling in GRO layer, from Jerry Chu.
13) Allow bonding to be configured fully using netlink, from Scott
Feldman.
14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
already get the TCI. From Atzm Watanabe.
15) New "Heavy Hitter" qdisc, from Terry Lam.
16) Significantly improve the IPSEC support in pktgen, from Fan Du.
17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom
Herbert.
18) Add Proportional Integral Enhanced packet scheduler, from Vijay
Subramanian.
19) Allow openvswitch to mmap'd netlink, from Thomas Graf.
20) Key TCP metrics blobs also by source address, not just destination
address. From Christoph Paasch.
21) Support 10G in generic phylib. From Andy Fleming.
22) Try to short-circuit GRO flow compares using device provided RX
hash, if provided. From Tom Herbert.
The wireless and netfilter folks have been busy little bees too.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
net/cxgb4: Fix referencing freed adapter
ipv6: reallocate addrconf router for ipv6 address when lo device up
fib_frontend: fix possible NULL pointer dereference
rtnetlink: remove IFLA_BOND_SLAVE definition
rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
qlcnic: update version to 5.3.55
qlcnic: Enhance logic to calculate msix vectors.
qlcnic: Refactor interrupt coalescing code for all adapters.
qlcnic: Update poll controller code path
qlcnic: Interrupt code cleanup
qlcnic: Enhance Tx timeout debugging.
qlcnic: Use bool for rx_mac_learn.
bonding: fix u64 division
rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
sfc: Use the correct maximum TX DMA ring size for SFC9100
Add Shradha Shah as the sfc driver maintainer.
net/vxlan: Share RX skb de-marking and checksum checks with ovs
tulip: cleanup by using ARRAY_SIZE()
ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
net/cxgb4: Don't retrieve stats during recovery
...
Also fix befs_iget return value if iget_locked fails.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The slow path in __fget_light() can use __fget() to avoid the
code duplication. Saves 232 bytes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Apart from FMODE_PATH check fget_light() and fget_raw_light() are
identical, shift the code into the new helper, __fget_light(fd, mask).
Saves 208 bytes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Apart from FMODE_PATH check fget() and fget_raw() are identical,
shift the code into the new simple helper, __fget(fd, mask). Saves
160 bytes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
put_files_struct() and close_files() do rcu_read_lock() to make
rcu_dereference_check_fdtable() happy.
This looks a bit ugly, files_fdtable() just reads the pointer,
we can simply use rcu_dereference_raw() to avoid the warning.
The patch also changes close_files() to return fdt, this avoids
another rcu_read_lock()/files_fdtable() in put_files_struct().
I think close_files() needs more cleanups:
- we do not need xchg() exactly because we are the last
user of this files_struct
- "if (file)" should be turned into WARN_ON(!file)
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
rcu_dereference_check_fdtable() looks very wrong,
1. rcu_my_thread_group_empty() was added by 844b9a8707 "vfs: fix
RCU-lockdep false positive due to /proc" but it doesn't really
fix the problem. A CLONE_THREAD (without CLONE_FILES) task can
hit the same race with get_files_struct().
And otoh rcu_my_thread_group_empty() can suppress the correct
warning if the caller is the CLONE_FILES (without CLONE_THREAD)
task.
2. files->count == 1 check is not really right too. Even if this
files_struct is not shared it is not safe to access it lockless
unless the caller is the owner.
Otoh, this check is sub-optimal. files->count == 0 always means
it is safe to use it lockless even if files != current->files,
but put_files_struct() has to take rcu_read_lock(). See the next
patch.
This patch removes the buggy checks and turns fcheck_files() into
__fcheck_files() which uses rcu_dereference_raw(), the "unshared"
callers, fget_light() and fget_raw_light(), can use it to avoid
the warning from RCU-lockdep.
fcheck_files() is trivially reimplemented as rcu_lockdep_assert()
plus __fcheck_files().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kill pointless method instances and don't bother with ->owner - it's
ignored for procfs files anyway, make use of remove_proc_subtree() for
removal, get rid of cell->proc_dir.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
pass owner explicitly to __register_nls(), make register_nls() a macro passing
THIS_MODULE as the owner argument to __register_nls().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* don't assume that ->dest_count won't change between copy_from_user()
and memdup_user()
* use fdget instead of fget
* don't bother comparing superblocks when we'd already compared vfsmounts
* get rid of excessive goto
* use file_inode() instead of open-coding the sucker
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* pass on-disk superblock to qnx4_chkroot() explicitly
* don't leave stale (and unused) pointers in qnx4_super_block
* free stuff in ->kill_sb(); ->put_super() becomes empty and dies
* simplify failure exits
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If ecryptfs_readlink_lower() fails, buf remains an uninitialized
pointer and passing it nd_set_link() won't do anything good.
Fixed by switching ecryptfs_readlink_lower() to saner API - make it
return buf or ERR_PTR(...) and update callers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A struct svc_fh is 320 bytes on x86_64, it'd be better not to have these
on the stack.
kmalloc'ing them probably isn't ideal either, but this is the simplest
thing to do. If it turns out to be a problem in the readdir case then
we could add a svc_fh to nfsd4_readdir and pass that in.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Some time ago, mkfs.xfs started picking the storage physical
sector size as the default filesystem "sector size" in order
to avoid RMW costs incurred by doing IOs at logical sector
size alignments.
However, this means that for a filesystem made with i.e.
a 4k sector size on an "advanced format" 4k/512 disk,
512-byte direct IOs are no longer allowed. This means
that XFS has essentially turned this AF drive into a hard
4K device, from the filesystem on up.
XFS's mkfs-specified "sector size" is really just controlling
the minimum size & alignment of filesystem metadata.
There is no real need to tightly couple XFS's minimal
metadata size to the minimum allowed direct IO size;
XFS can continue doing metadata in optimal sizes, but
still allow smaller DIOs for apps which issue them,
for whatever reason.
This patch adds a new field to the xfs_buftarg, so that
we now track 2 sizes:
1) The metadata sector size, which is the minimum unit and
alignment of IO which will be performed by metadata operations.
2) The device logical sector size
The first is used internally by the file system for metadata
alignment and IOs.
The second is used for the minimum allowed direct IO alignment.
This has passed xfstests on filesystems made with 4k sectors,
including when run under the patch I sent to ignore
XFS_IOC_DIOINFO, and issue 512 DIOs anyway. I also directly
tested end of block behavior on preallocated, sparse, and
existing files when we do a 512 IO into a 4k file on a
4k-sector filesystem, to be sure there were no unexpected
behaviors.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In preparation for adding new members to the structure,
give these old ones more descriptive names:
bt_ssize -> bt_meta_sectorsize
bt_smask -> bt_meta_sectormask
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Clean up the xfs_buftarg structure a bit:
- remove bt_bsize which is never used
- replace bt_sshift with bt_ssize; we only ever shift it back
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Getting an inode by romfs_iget may lead to an err in fill_super, and the
err value should be return.
And it should return -ENOMEM instead while d_make_root fails, fix it too.
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So far, POSIX ACLs are using a canonical representation that keeps all ACL
entries in a strict order; the ACL_USER and ACL_GROUP entries for specific
users and groups are ordered by user and group identifier, respectively.
The user-space code provides ACL entries in this order; the kernel
verifies that the ACL entry order is correct in posix_acl_valid().
User namespaces allow to arbitrary map user and group identifiers which
can cause the ACL_USER and ACL_GROUP entry order to differ between user
space and the kernel; posix_acl_valid() would then fail.
Work around this by allowing ACL_USER and ACL_GROUP entries to be in any
order in the kernel. The effect is only minor: file permission checks
will pick the first matching ACL_USER entry, and check all matching
ACL_GROUP entries.
(The libacl user-space library and getfacl / setfacl tools will not create
ACLs with duplicate user or group idenfifiers; they will handle ACLs with
entries in an arbitrary order correctly.)
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
use do{}while - more efficient and it squishes a coccinelle warning
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead
of opencoding an alternate postorder iteration that modifies the tree
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead
of opencoding an alternate postorder iteration that modifies the tree
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead
of opencoding an alternate postorder iteration that modifies the tree
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michel Lespinasse <walken@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead
of opencoding an alternate postorder iteration that modifies the tree
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently both setup_new_exec() and flush_old_exec() issue a call to
arch_pick_mmap_layout(). As setup_new_exec() and flush_old_exec() are
always called pairwise arch_pick_mmap_layout() is called twice.
This patch removes one call from setup_new_exec() to have it only called
once.
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Pat Erley <pat-lkml@erley.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Userspace process doesn't want the PF_NO_SETAFFINITY, but its parent may be
a kernel worker thread which has PF_NO_SETAFFINITY set, and this worker thread
can do kernel_thread() to create the child.
Clearing this flag in usersapce child to enable its migrating capability.
Signed-off-by: Zhang Yi <zhang.yi20@zte.com.cn>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the remaining next_thread (ab)users to use while_each_thread().
The last user which should be changed is next_tid(), but we can't do this
now.
__exit_signal() and complete_signal() are fine, they actually need
next_thread() logic.
This patch (of 3):
do_task_stat() can use while_each_thread(), no changes in
the compiled code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can kill either task->did_exec or PF_FORKNOEXEC, they are mutually
exclusive. The patch kills ->did_exec because it has a single user.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both success/failure paths cleanup bprm->file, we can move this
code into free_bprm() to simlify and cleanup this logic.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs_struct->in_exec == T means that this ->fs is used by a single process
(thread group), and one of the treads does do_execve().
To avoid the mt-exec races this code has the following complications:
1. check_unsafe_exec() returns -EBUSY if ->in_exec was
already set by another thread.
2. do_execve_common() records "clear_in_exec" to ensure
that the error path can only clear ->in_exec if it was
set by current.
However, after 9b1bf12d5d "signals: move cred_guard_mutex from
task_struct to signal_struct" we do not need these complications:
1. We can't race with our sub-thread, this is called under
per-process ->cred_guard_mutex. And we can't race with
another CLONE_FS task, we already checked that this fs
is not shared.
We can remove the dead -EAGAIN logic.
2. "out_unmark:" in do_execve_common() is either called
under ->cred_guard_mutex, or after de_thread() which
kills other threads, so we can't race with sub-thread
which could set ->in_exec. And if ->fs is shared with
another process ->in_exec should be false anyway.
We can clear in_exec unconditionally.
This also means that check_unsafe_exec() can be void.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
next_thread() should be avoided, change check_unsafe_exec() to use
while_each_thread().
Nobody except signal->curr_target actually needs next_thread-like code,
and we need to change (fix) this interface. This particular code is fine,
p == current. But in general the code like this can loop forever if p
exits and next_thread(t) can't reach the unhashed thread.
This also saves 32 bytes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PROC_FS is a bool, so this code is either present or absent. It will
never be modular, so using module_init as an alias for __initcall is
rather misleading.
Fix this up now, so that we can relocate module_init from init.h into
module.h in the future. If we don't do this, we'd have to add module.h to
obviously non-modular code, and that would be ugly at best.
Note that direct use of __initcall is discouraged, vs. one of the
priority categorized subgroups. As __initcall gets mapped onto
device_initcall, our use of fs_initcall (which makes sense for fs code)
will thus change these registrations from level 6-device to level 5-fs
(i.e. slightly earlier). However no observable impact of that small
difference has been observed during testing, or is expected.
Also note that this change uncovers a missing semicolon bug in the
registration of vmcore_init as an initcall.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trivial cleanup to eliminate a goto.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Distribution kernels might want to build in support for /proc/device-tree
for kernels that might end up running on hardware that doesn't support
openfirmware. This results in an empty /proc/device-tree existing.
Remove it if the OFW root node doesn't exist.
This situation actually confuses grub2, resulting in install failures.
grub2 sees the /proc/device-tree and picks the wrong install target cf.
http://bzr.savannah.gnu.org/lh/grub/trunk/grub/annotate/4300/util/grub-install.in#L311
grub should be more robust, but still, leaving an empty proc dir seems
pointless.
Addresses https://bugzilla.redhat.com/show_bug.cgi?id=818378.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use existing accessors proc_set_user() and proc_set_size() to set
attributes. Just a cleanup.
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. proc_task_readdir()->first_tid() path truncates f_pos to int, this
is wrong even on 64bit.
We could check that f_pos < PID_MAX or even INT_MAX in
proc_task_readdir(), but this patch simply checks the potential
overflow in first_tid(), this check is nop on 64bit. We do not care if
it was negative and the new unsigned value is huge, all we need to
ensure is that we never wrongly return !NULL.
2. Remove the 2nd "nr != 0" check before get_nr_threads(),
nr_threads == 0 is not distinguishable from !pid_task() above.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sameer Nanda <snanda@chromium.org>
Cc: Sergey Dyasly <dserrg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
proc_task_readdir() does not really need "leader", first_tid() has to
revalidate it anyway. Just pass proc_pid(inode) to first_tid() instead,
it can do pid_task(PIDTYPE_PID) itself and read ->group_leader only if
necessary.
The patch also extracts the "inode is dead" code from
pid_delete_dentry(dentry) into the new trivial helper,
proc_inode_is_dead(inode), proc_task_readdir() uses it to return -ENOENT
if this dir was removed.
This is a bit racy, but the race is very inlikely and the getdents() after
openndir() can see the empty "." + ".." dir only once.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sameer Nanda <snanda@chromium.org>
Cc: Sergey Dyasly <dserrg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rerwrite the main loop to use while_each_thread() instead of
next_thread(). We are going to fix or replace while_each_thread(),
next_thread() should be avoided whenever possible.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sameer Nanda <snanda@chromium.org>
Cc: Sergey Dyasly <dserrg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
proc_task_readdir() verifies that the result of get_proc_task() is
pid_alive() and thus its ->group_leader is fine too. However this is not
necessarily true after rcu_read_unlock(), we need to recheck this again
after first_tid() does rcu_read_lock(). Otherwise
leader->thread_group.next (used by next_thread()) can be invalid if the
rcu grace period expires in between.
The race is subtle and unlikely, but still it is possible afaics. To
simplify lets ignore the "likely" case when tid != 0, f_version can be
cleared by proc_task_operations->llseek().
Suppose we have a main thread M and its subthread T. Suppose that f_pos
== 3, iow first_tid() should return T. Now suppose that the following
happens between rcu_read_unlock() and rcu_read_lock():
1. T execs and becomes the new leader. This removes M from
->thread_group but next_thread(M) is still T.
2. T creates another thread X which does exec as well, T
goes away.
3. X creates another subthread, this increments nr_threads.
4. first_tid() does next_thread(M) and returns the already
dead T.
Note also that we need 2. and 3. only because of get_nr_threads() check,
and this check was supposed to be optimization only.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sameer Nanda <snanda@chromium.org>
Cc: Sergey Dyasly <dserrg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get_task_state() and task_state_array[] look confusing and suboptimal, it
is not clear what it can actually report to user-space and
task_state_array[] blows .data for no reason.
1. state = (tsk->state & TASK_REPORT) | tsk->exit_state is not
clear. TASK_REPORT is self-documenting but it is not clear
what ->exit_state can add.
Move the potential exit_state's (EXIT_ZOMBIE and EXIT_DEAD)
into TASK_REPORT and use it to calculate the final result.
2. With the change above it is obvious that task_state_array[]
has the unused entries just to make BUILD_BUG_ON() happy.
Change this BUILD_BUG_ON() to use TASK_REPORT rather than
TASK_STATE_MAX and shrink task_state_array[].
3. Turn the "while (state)" loop into fls(state).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. Remove fs/coredump.h. It is not clear why do we need it,
it only declares __get_dumpable(), signal.c includes it
for no reason.
2. Now that get_dumpable() and __get_dumpable() are really
trivial make them inline in linux/sched.h.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alex Kelly <alex.page.kelly@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nobody actually needs MMF_DUMPABLE/MMF_DUMP_SECURELY, they are only used
to enforce the encoding of SUID_DUMP_* enum in mm->flags &
MMF_DUMPABLE_MASK.
Now that set_dumpable() updates both bits atomically we can kill them and
simply store the value "as is" in 2 lower bits.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alex Kelly <alex.page.kelly@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
set_dumpable() updates MMF_DUMPABLE_MASK in a non-trivial way to ensure
that get_dumpable() can't observe the intermediate state, but this all
can't help if multiple threads call set_dumpable() at the same time.
And in theory commit_creds()->set_dumpable(SUID_DUMP_ROOT) racing with
sys_prctl()->set_dumpable(SUID_DUMP_DISABLE) can result in SUID_DUMP_USER.
Change this code to update both bits atomically via cmpxchg().
Note: this assumes that it is safe to mix bitops and cmpxchg. IOW, if,
say, an architecture implements cmpxchg() using the locking (like
arch/parisc/lib/bitops.c does), then it should use the same locks for
set_bit/etc.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alex Kelly <alex.page.kelly@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HFS+ resource fork lookup breaks opendir() library function. Since
opendir first calls open() with O_DIRECTORY flag set. O_DIRECTORY means
"refuse to open if not a directory". The open system call in the kernel
does a check for inode->i_op->lookup and returns -ENOTDIR. So if
hfsplus_file_lookup is set it allows opendir() for plain files.
Also resource fork lookup in HFS+ does not work. Since it is never
invoked after VFS permission checking. It will always return with
-EACCES.
When we call opendir() on a file, it does not return NULL. opendir()
library call is based on open with O_DIRECTORY flag passed and then
layered on top of getdents() system call. O_DIRECTORY means "refuse to
open if not a directory".
The open() system call in the kernel does a check for: do_sys_open()
-->..--> can_lookup() i.e it only checks inode->i_op->lookup and returns
ENOTDIR if this function pointer is not set.
In OSX, we can open "file/rsrc" to get the resource fork of "file". This
behavior is emulated inside hfsplus on Linux, which means that to some
degree every file acts like a directory. That is the reason lookup()
inode operations is supported for files, and it is possible to do a lookup
on this specific name. As a result of this open succeeds without
returning ENOTDIR for HFS+
Please see the LKML discussion thread on this issue:
http://marc.info/?l=linux-fsdevel&m=122823343730412&w=2
I tried to test file/rsrc lookup in HFS+ driver and the feature does not
work. From OSX:
$ touch test
$ echo "1234" > test/..namedfork/rsrc
$ ls -l test..namedfork/rsrc
--rw-r--r-- 1 tuxera staff 5 10 dec 12:59 test/..namedfork/rsrc
[sougata@ultrabook tmp]$ id
uid=1000(sougata) gid=1000(sougata) groups=1000(sougata),5(tty),18(dialout),1001(vboxusers)
[sougata@ultrabook tmp]$ mount
/dev/sdb1 on /mnt/tmp type hfsplus (rw,relatime,umask=0,uid=1000,gid=1000,nls=utf8)
[sougata@ultrabook tmp]$ ls -l test/rsrc
ls: cannot access test/rsrc: Permission denied
According to this LKML thread it is expected behavior.
http://marc.info/?t=121139033800008&r=1&w=4
I guess now that permission checking happens in vfs generic_permission() ?
So it turns out that even though the lookup() inode_operation exists for
HFS+ files. It cannot really get invoked ?. So if we can disable this
feature to make opendir() work for HFS+.
Signed-off-by: Sougata Santra <sougata@tuxera.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Anton Altaparmakov <aia21@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add comments for ioctls in fs/nilfs2/ioctl.c file and describe NILFS2
specific ioctls in Documentation/filesystems/nilfs2.txt.
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Reviewed-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Wenliang Fan <fanwlexca@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The local variable 'pos' in nilfs_ioctl_wrap_copy function can overflow if
a large number was passed to argv->v_index from userspace and the sum of
argv->v_index and argv->v_nmembs exceeds the maximum value of __u64 type
integer (= ~(__u64)0 = 18446744073709551615).
Here, argv->v_index is a 64-bit width argument to specify the start
position of target data items (such as segment number, checkpoint number,
or virtual block address of nilfs), and argv->v_nmembs gives the total
number of the items that userland programs (such as lssu, lscp, or
cleanerd) want to get information about, which also gives the maximum
element count of argv->v_base[] array.
nilfs_ioctl_wrap_copy() calls dofunc() repeatedly and increments the
position variable 'pos' at the end of each iteration if dofunc() itself
didn't update 'pos':
if (pos == ppos)
pos += n;
This patch prevents the overflow here by rejecting pairs of a start
position (argv->v_index) and a total count (argv->v_nmembs) which leads to
the overflow.
[konishi.ryusuke@lab.ntt.co.jp: fix signedness issue]
Signed-off-by: Wenliang Fan <fanwlexca@gmail.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pipe has no data associated with fs so it is not good idea to block
pipe_write() if FS is frozen, but we can not update file's time on such
filesystem. Let's use same idea as we use in touch_time().
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=65701
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The autofs4 module doesn't consider symlinks for expire as it did in the
older autofs v3 module (so it's actually a long standing regression).
The user space daemon has focused on the use of bind mounts instead of
symlinks for a long time now and that's why this has not been noticed.
But with the future addition of amd map parsing to automount(8), not to
mention amd itself (of am-utils), symlink expiry will be needed.
The direct and offset mount types can't be symlinks and the tree mounts of
version 4 were always real mounts so only indirect mounts need expire
symlinks.
Since the current users of the autofs4 module haven't reported this as a
problem to date this patch probably isn't a candidate for backport to
stable.
Signed-off-by: Ian Kent <ikent@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the helper macro !IS_ROOT to replace parent != dentry->d_parent. Just
clean up.
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While kzallocing sbi/ino fails, it should return -ENOMEM.
And it should return the err value from autofs_prepare_pipe.
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The PID and the TGID of the process triggering the mount are sent to the
daemon. Currently the global pid values are sent (ones valid in the
initial pid namespace) but this is wrong if the autofs daemon itself is
not running in the initial pid namespace.
So send the pid values that are valid in the namespace of the autofs
daemon.
The namespace to use is taken from the oz_pgrp pid pointer, which was
set at mount time to the mounting process' pid namespace.
If the pid translation fails (the triggering process is in an unrelated
pid namespace) then the automount fails with ENOENT.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Acked-by: Ian Kent <raven@themaw.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable autofs4 to work in a "container". oz_pgrp is converted from
pid_t to struct pid and this is stored at mount time based on the
"pgrp=" option or if the option is missing then the current pgrp.
The "pgrp=" option is interpreted in the PID namespace of the current
process. This option is flawed in that it doesn't carry the namespace
information, so it should be deprecated. AFAICS the autofs daemon
always sends the current pgrp, which is the default anyway.
The oz_pgrp is also set from the AUTOFS_DEV_IOCTL_SETPIPEFD_CMD ioctl.
This ioctl sets oz_pgrp to the current pgrp. It is not allowed to
change the pid namespace.
oz_pgrp is used mainly to determine whether the process traversing the
autofs mount tree is the autofs daemon itself or not. This function now
compares the pid pointers instead of the pid_t values.
One other use of oz_pgrp is in autofs4_show_options. There is shows the
virtual pid number (i.e. the one that is valid inside the PID namespace
of the calling process)
For debugging printk convert oz_pgrp to the value in the initial pid
namespace.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Acked-by: Ian Kent <raven@themaw.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ramfs_aops is identical in file-mmu.c and file-nommu.c. Thus move it to
fs/ramfs/inode.c and make it static.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 853ac43ab1 ("shmem: unify regular and tiny shmem"),
ramfs_nommu_get_unmapped_area() and ramfs_nommu_mmap() are not directly
referenced outside of file-nommu.c. Thus make them static.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These two defines are unused since the removal of the a.out interpreter
support in the ELF loader in kernel 2.6.25
Signed-off-by: Todor Minchev <todor@minchev.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the definition is centralized in <linux/kernel.h>, the
definitions of U32_MAX (and related) elsewhere in the kernel can be
removed.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Sage Weil <sage@inktank.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The symbol U32_MAX is defined in several spots. Change these
definitions to be conditional. This is in preparation for the next
patch, which centralizes the definition in <linux/kernel.h>.
Signed-off-by: Alex Elder <elder@linaro.org>
Cc: Sage Weil <sage@inktank.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In get_mapping_page(), after calling find_or_create_page(), the return
value should be checked.
This patch has been provided:
http://www.spinics.net/lists/linux-fsdevel/msg66948.html but not been
applied now.
Signed-off-by: Younger Liu <liuyiyang@hisense.com>
Cc: Younger Liu <younger.liucn@gmail.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Reviewed-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Jörn Engel <joern@logfs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
stable_page_flags() checks !PageHuge && PageTransCompound && PageLRU to
know that a specified page is thp or not. But sometimes it's not enough
and we fail to detect thp when the thp is on pagevec. This happens only
for a few seconds after LRU list operations, but it makes it difficult
to control our applications depending on this flag.
So this patch adds another check PageAnon to detect thps on pagevec. It
might not give the future extensibility for thp pagecache, but it's OK
at least for now.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We stick an extra svc_fh in nfsd3_readdirres to save the need to
kmalloc, though maybe it would be fine to kmalloc instead.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull UDF & jbd fixes from Jan Kara:
"A cleanup of JBD log messages and UDF fix of a lockdep warning"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix lockdep warning from udf_symlink()
jbd: Revise KERN_EMERG error messages
Pull fuse update from Miklos Szeredi:
"This contains a fix for a potential use-after-module-unload bug
noticed by Al and caching improvements for read-only fuse filesystems
by Andrew Gallagher"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: support clients that don't implement 'open'
fuse: don't invalidate attrs when not using atime
fuse: fix SetPageUptodate() condition in STORE
fuse: fix pipe_buf_operations
This patch-set includes the following major enhancement patches.
o support inline_data
o refactor bio operations such as merge operations and rw type assignment
o enhance the direct IO path
o enhance bio operations
o truncate a node page when it becomes obsolete
o add sysfs entries: small_discards, max_victim_search, and in-place-update
o add a sysfs entry to control max_victim_search
The other bug fixes are as follows.
o fix a bug in truncate_partial_nodes
o avoid warnings during sparse and build process
o fix error handling flows
o fix potential bit overflows
And, there are a bunch of cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=gVDh
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, a couple of sysfs entries were introduced to tune the
f2fs at runtime.
In addition, f2fs starts to support inline_data and improves the
read/write performance in some workloads by refactoring bio-related
flows.
This patch-set includes the following major enhancement patches.
- support inline_data
- refactor bio operations such as merge operations and rw type
assignment
- enhance the direct IO path
- enhance bio operations
- truncate a node page when it becomes obsolete
- add sysfs entries: small_discards, max_victim_search, and
in-place-update
- add a sysfs entry to control max_victim_search
The other bug fixes are as follows.
- fix a bug in truncate_partial_nodes
- avoid warnings during sparse and build process
- fix error handling flows
- fix potential bit overflows
And, there are a bunch of cleanups"
* tag 'for-f2fs-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (95 commits)
f2fs: drop obsolete node page when it is truncated
f2fs: introduce NODE_MAPPING for code consistency
f2fs: remove the orphan block page array
f2fs: add help function META_MAPPING
f2fs: move a branch for code redability
f2fs: call mark_inode_dirty to flush dirty pages
f2fs: clean checkpatch warnings
f2fs: missing REQ_META and REQ_PRIO when sync_meta_pages(META_FLUSH)
f2fs: avoid f2fs_balance_fs call during pageout
f2fs: add delimiter to seperate name and value in debug phrase
f2fs: use spinlock rather than mutex for better speed
f2fs: move alloc new orphan node out of lock protection region
f2fs: move grabing orphan pages out of protection region
f2fs: remove the needless parameter of f2fs_wait_on_page_writeback
f2fs: update documents and a MAINTAINERS entry
f2fs: add a sysfs entry to control max_victim_search
f2fs: improve write performance under frequent fsync calls
f2fs: avoid to read inline data except first page
f2fs: avoid to left uninitialized data in page when read inline data
f2fs: fix truncate_partial_nodes bug
...
For 3.14-rc1 there are fixes in the areas of remote attributes, discard,
growfs, memory leaks in recovery, directory v2, quotas, the MAINTAINERS
file, allocation alignment, extent list locking, and in
xfs_bmapi_allocate. There are cleanups in xfs_setsize_buftarg, removing
unused macros, quotas, setattr, and freeing of inode clusters. The
in-memory and on-disk log format have been decoupled, a common helper to
calculate the number of blocks in an inode cluster has been added, and
handling of i_version has been pulled into the filesystems that use it.
- cleanup in xfs_setsize_buftarg
- removal of remaining unused flags for vop toss/flush/flushinval
- fix for memory corruption in xfs_attrlist_by_handle
- fix for out-of-date comment in xfs_trans_dqlockedjoin
- fix for discard if range length is less than one block
- fix for overrun of agfl buffer using growfs on v4 superblock filesystems
- pull i_version handling out into the filesystems that use it
- don't leak recovery items on error
- fix for memory leak in xfs_dir2_node_removename
- several cleanups for quotas
- fix bad assertion in xfs_qm_vop_create_dqattach
- cleanup for xfs_setattr_mode, and add xfs_setattr_time
- fix quota assert in xfs_setattr_nonsize
- fix an infinite loop when turning off group/project quota before user
quota
- fix for temporary buffer allocation failure in xfs_dir2_block_to_sf
with large directory block sizes
- fix Dave's email address in MAINTAINERS
- cleanup calculation of freed inode cluster blocks
- fix alignment of initial file allocations to match filesystem geometry
- decouple in-memory and on-disk log format
- introduce a common helper to calculate the number of filesystem
blocks in an inode cluster
- fixes for extent list locking
- fix for off-by-one in xfs_attr3_rmt_verify
- fix for missing destroy_work_on_stack in xfs_bmapi_allocate
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=t8nB
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-v3.14-rc1' of git://oss.sgi.com/xfs/xfs
Pull xfs update from Ben Myers:
"This is primarily bug fixes, many of which you already have. New
stuff includes a series to decouple the in-memory and on-disk log
format, helpers in the area of inode clusters, and i_version handling.
We decided to try to use more topic branches this release, so there
are some merge commits in there on account of that. I'm afraid I
didn't do a good job of putting meaningful comments in the first
couple of merges. Sorry about that. I think I have the hang of it
now.
For 3.14-rc1 there are fixes in the areas of remote attributes,
discard, growfs, memory leaks in recovery, directory v2, quotas, the
MAINTAINERS file, allocation alignment, extent list locking, and in
xfs_bmapi_allocate. There are cleanups in xfs_setsize_buftarg,
removing unused macros, quotas, setattr, and freeing of inode
clusters. The in-memory and on-disk log format have been decoupled, a
common helper to calculate the number of blocks in an inode cluster
has been added, and handling of i_version has been pulled into the
filesystems that use it.
- cleanup in xfs_setsize_buftarg
- removal of remaining unused flags for vop toss/flush/flushinval
- fix for memory corruption in xfs_attrlist_by_handle
- fix for out-of-date comment in xfs_trans_dqlockedjoin
- fix for discard if range length is less than one block
- fix for overrun of agfl buffer using growfs on v4 superblock
filesystems
- pull i_version handling out into the filesystems that use it
- don't leak recovery items on error
- fix for memory leak in xfs_dir2_node_removename
- several cleanups for quotas
- fix bad assertion in xfs_qm_vop_create_dqattach
- cleanup for xfs_setattr_mode, and add xfs_setattr_time
- fix quota assert in xfs_setattr_nonsize
- fix an infinite loop when turning off group/project quota before
user quota
- fix for temporary buffer allocation failure in xfs_dir2_block_to_sf
with large directory block sizes
- fix Dave's email address in MAINTAINERS
- cleanup calculation of freed inode cluster blocks
- fix alignment of initial file allocations to match filesystem
geometry
- decouple in-memory and on-disk log format
- introduce a common helper to calculate the number of filesystem
blocks in an inode cluster
- fixes for extent list locking
- fix for off-by-one in xfs_attr3_rmt_verify
- fix for missing destroy_work_on_stack in xfs_bmapi_allocate"
* tag 'xfs-for-linus-v3.14-rc1' of git://oss.sgi.com/xfs/xfs: (51 commits)
xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
xfs: fix off-by-one error in xfs_attr3_rmt_verify
xfs: assert that we hold the ilock for extent map access
xfs: use xfs_ilock_attr_map_shared in xfs_attr_list_int
xfs: use xfs_ilock_attr_map_shared in xfs_attr_get
xfs: use xfs_ilock_data_map_shared in xfs_qm_dqiterate
xfs: use xfs_ilock_data_map_shared in xfs_qm_dqtobp
xfs: take the ilock around xfs_bmapi_read in xfs_zero_remaining_bytes
xfs: reinstate the ilock in xfs_readdir
xfs: add xfs_ilock_attr_map_shared
xfs: rename xfs_ilock_map_shared
xfs: remove xfs_iunlock_map_shared
xfs: no need to lock the inode in xfs_find_handle
xfs: use xfs_icluster_size_fsb in xfs_imap
xfs: use xfs_icluster_size_fsb in xfs_ifree_cluster
xfs: use xfs_icluster_size_fsb in xfs_ialloc_inode_init
xfs: use xfs_icluster_size_fsb in xfs_bulkstat
xfs: introduce a common helper xfs_icluster_size_fsb
xfs: get rid of XFS_IALLOC_BLOCKS macros
xfs: get rid of XFS_INODE_CLUSTER_SIZE macros
...
In debug mode exofs is too verbose. Hiding the real problems
remove some trivial stuff.
Also fix some other prints.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
If there was an error in fetching an object or extracting
inode info from attributes. Which means corrupted storage.
Let it be an empty ZERO dated directory entry so it can be
deleted. Otherwise the all directory will be inaccessible.
This does not loose data, because if there is an orphan object
somewhere it will be recovered by fschk. But usually this only
means corrupted dir entry. The object was never generated and
only its link exist. This way we can delete the bad entry.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
With this minimal do nothing patch an application can open O_DIRECT
and then actually do buffered sync IO instead. But the aio API is
supported which is a good thing
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
In the case of target returning OSD_ERR_PRI_CLEAR_PAGES when we
only sent for attributes don't crash on NULL bio.
This is an osd-target bug but don't crash regardless
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
At IO preparation we calculate the max pages at each device and
allocate a BIO per device of that size. The calculation was wrong
on some unaligned corner cases offset/length combination and would
make prepare return with -ENOMEM. This would be bad for pnfs-objects
that would in that case IO through MDS. And fatal for exofs were it
would fail writes with EIO.
Fix it by doing the proper math, that will work in all cases. (I
ran a test with all possible offset/length combinations this time
round).
Also when reading we do not need to allocate for the parity units
since we jump over them.
Also lower the max_io_length to take into account the parity pages
so not to allocate BIOs bigger than PAGE_SIZE
CC: Stable Kernel <stable@vger.kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Pull trivial tree updates from Jiri Kosina:
"Usual rocket science stuff from trivial.git"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
neighbour.h: fix comment
sched: Fix warning on make htmldocs caused by wait.h
slab: struct kmem_cache is protected by slab_mutex
doc: Fix typo in USB Gadget Documentation
of/Kconfig: Spelling s/one/once/
mkregtable: Fix sscanf handling
lp5523, lp8501: comment improvements
thermal: rcar: comment spelling
treewide: fix comments and printk msgs
IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart()
Documentation: update /proc/uptime field description
Documentation: Fix size parameter for snprintf
arm: fix comment header and macro name
asm-generic: uaccess: Spelling s/a ny/any/
mtd: onenand: fix comment header
doc: driver-model/platform.txt: fix a typo
drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text
doc: Fix typo (acces_process_vm -> access_process_vm)
treewide: Fix typos in printk
drivers/gpu/drm/qxl/Kconfig: reformat the help text
...
An NFS4ERR_RECALLCONFLICT is returned by server from a GET_LAYOUT
only when a Server Sent a RECALL do to that GET_LAYOUT, or
the RECALL and GET_LAYOUT crossed on the wire.
In any way this means we want to wait at most until in-flight IO
is finished and the RECALL can be satisfied.
So a proper wait here is more like 1/10 of a second, not 15 seconds
like we have now. In case of a server bug we delay exponentially
longer on each retry.
Current code totally craps out performance of very large files on
most pnfs-objects layouts, because of how the map changes when the
file has grown into the next raid group.
[Stable: This will patch back to 3.9. If there are earlier still
maintained trees, please tell me I'll send a patch]
CC: Stable Tree <stable@vger.kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If a node page is trucated, we'd better drop the page in the node_inode's page
cache for better memory footprint.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
open/release operations require userspace transitions to keep track
of the open count and to perform any FS-specific setup. However,
for some purely read-only FSs which don't need to perform any setup
at open/release time, we can avoid the performance overhead of
calling into userspace for open/release calls.
This patch adds the necessary support to the fuse kernel modules to prevent
open/release operations from hitting in userspace. When the client returns
ENOSYS, we avoid sending the subsequent release to userspace, and also
remember this so that future opens also don't trigger a userspace
operation.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Various read operations (e.g. readlink, readdir) invalidate the cached
attrs for atime changes. This patch adds a new function
'fuse_invalidate_atime', which checks for a read-only super block and
avoids the attr invalidation in that case.
Signed-off-by: Andrew Gallagher <andrewjcg@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
As noticed by Coverity the "num != 0" condition never triggers. Instead it
should check for a complete page.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Having this struct in module memory could Oops when if the module is
unloaded while the buffer still persists in a pipe.
Since sock_pipe_buf_ops is essentially the same as fuse_dev_pipe_buf_steal
merge them into nosteal_pipe_buf_ops (this is the same as
default_pipe_buf_ops except stealing the page from the buffer is not
allowed).
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org
This patch adds NODE_MAPPING which is similar as META_MAPPING introduced by
Gu Zheng.
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
As the orphan_blocks may be max to 504, so it is not security
and rigorous to store such a large array in the kernel stack
as Dan Carpenter said.
In fact, grab_meta_page has locked the page in the page cache,
and we can use find_get_page() to fetch the page safely in the
downstream, so we can remove the page array directly.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Introduce help function META_MAPPING() to get the cache meta blocks'
address space.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If a dentry page is updated, we should call mark_inode_dirty to add the inode
into the dirty list, so that its dentry pages are flushed to the disk.
Otherwise, the inode can be evicted without flush.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch addresses a bug in bio_integrity_verify() code that has
been causing DIF READ verify operations to be silently skipped.
The issue is that bio->bi_idx will have been incremented within
bio_advance() code in the normal blk_update_request() ->
req_bio_endio() completion path, and bio_integrity_verify() is
using bio_for_each_segment() which starts the bio segment walk
at the current bio->bi_idx.
So instead use bio_for_each_segment_all() to always start the bio
segment walk from zero, regardless of the current bio->bi_idx
value after bio_advance() has been called.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: stable@kernel.dk # >= v3.10
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge first patch-bomb from Andrew Morton:
- a couple of misc things
- inotify/fsnotify work from Jan
- ocfs2 updates (partial)
- about half of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
mm/migrate: remove unused function, fail_migrate_page()
mm/migrate: remove putback_lru_pages, fix comment on putback_movable_pages
mm/migrate: correct failure handling if !hugepage_migration_support()
mm/migrate: add comment about permanent failure path
mm, page_alloc: warn for non-blockable __GFP_NOFAIL allocation failure
mm: compaction: reset scanner positions immediately when they meet
mm: compaction: do not mark unmovable pageblocks as skipped in async compaction
mm: compaction: detect when scanners meet in isolate_freepages
mm: compaction: reset cached scanner pfn's before reading them
mm: compaction: encapsulate defer reset logic
mm: compaction: trace compaction begin and end
memcg, oom: lock mem_cgroup_print_oom_info
sched: add tracepoints related to NUMA task migration
mm: numa: do not automatically migrate KSM pages
mm: numa: trace tasks that fail migration due to rate limiting
mm: numa: limit scope of lock for NUMA migrate rate limiting
mm: numa: make NUMA-migrate related functions static
lib/show_mem.c: show num_poisoned_pages when oom
mm/hwpoison: add '#' to hwpoison_inject
mm/memblock: use WARN_ONCE when MAX_NUMNODES passed as input parameter
...
Redefined {lock|release}_sock to sctp_{lock|release}_sock for user space friendly
code which we haven't use in years, so removing them.
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This set includes a single change to speed up
recovery times when using SCTP connections.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=/Wic
-----END PGP SIGNATURE-----
Merge tag 'dlm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm update from David Teigland:
"A single change to speed up recovery times when using SCTP
connections"
* tag 'dlm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: set zero linger time on sctp socket
improvements when searching resource groups and several updates
to quotas which should increase scalability. The quota changes
follow on from those in the last merge window, and there will
likely be further work to come in this area in due course.
There are also a few patches which help to improve efficiency
of adding entries into directories, and clean up some of that
code.
One on-disk change is included this time, which is to write some
additional information which should be useful to fsck and
also potentially for debugging.
Other than that, its just a few small random bug fixes and
clean ups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=/tv0
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull GFS2 updates from Steven Whitehouse:
"The main topics this time are allocation, in the form of Bob's
improvements when searching resource groups and several updates to
quotas which should increase scalability. The quota changes follow on
from those in the last merge window, and there will likely be further
work to come in this area in due course.
There are also a few patches which help to improve efficiency of
adding entries into directories, and clean up some of that code.
One on-disk change is included this time, which is to write some
additional information which should be useful to fsck and also
potentially for debugging.
Other than that, its just a few small random bug fixes and clean ups"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (24 commits)
GFS2: revert "GFS2: d_splice_alias() can't return error"
GFS2: Small cleanup
GFS2: Don't use ENOBUFS when ENOMEM is the correct error code
GFS2: Fix kbuild test robot reported warning
GFS2: Move quota bitmap operations under their own lock
GFS2: Clean up quota slot allocation
GFS2: Only run logd and quota when mounted read/write
GFS2: Use RCU/hlist_bl based hash for quotas
GFS2: No need to invalidate pages for a dio read
GFS2: Add initialization for address space in super block
GFS2: Add hints to directory leaf blocks
GFS2: For exhash conversion, only one block is needed
GFS2: Increase i_writecount during gfs2_setattr_chown
GFS2: Remember directory insert point
GFS2: Consolidate transaction blocks calculation for dir add
GFS2: Add directory addition info structure
GFS2: Use only a single address space for rgrps
GFS2: Use range based functions for rgrp sync/invalidation
GFS2: Remove test which is always true
GFS2: Remove gfs2_quota_change_host structure
...
Many load balancing and workload placing programs check /proc/meminfo to
estimate how much free memory is available. They generally do this by
adding up "free" and "cached", which was fine ten years ago, but is
pretty much guaranteed to be wrong today.
It is wrong because Cached includes memory that is not freeable as page
cache, for example shared memory segments, tmpfs, and ramfs, and it does
not include reclaimable slab memory, which can take up a large fraction
of system memory on mostly idle systems with lots of files.
Currently, the amount of memory that is available for a new workload,
without pushing the system into swap, can be estimated from MemFree,
Active(file), Inactive(file), and SReclaimable, as well as the "low"
watermarks from /proc/zoneinfo.
However, this may change in the future, and user space really should not
be expected to know kernel internals to come up with an estimate for the
amount of free memory.
It is more convenient to provide such an estimate in /proc/meminfo. If
things change in the future, we only have to change it in one place.
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Erik Mouw <erik.mouw_2@nxp.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ramfs is always built in. It will never be modular, so using
module_init as an alias for __initcall is rather misleading.
Fix this up now, so that we can relocate module_init from init.h into
module.h in the future. If we don't do this, we'd have to add module.h
to obviously non-modular code, and that would be a worse thing.
Note that direct use of __initcall is discouraged, vs. one of the
priority categorized subgroups. As __initcall gets mapped onto
device_initcall, our use of fs_initcall (which makes sense for fs code)
will thus change this registration from level 6-device to level 5-fs
(i.e. slightly earlier). However no observable impact of that small
difference has been observed during testing, or is expected.
Also note that this change uncovers a missing semicolon bug in the
registration of the initcall.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On fail path alloc_super() calls destroy_super(), which issues a warning
if the sb's s_mounts list is not empty, in particular if it has not been
initialized. That said s_mounts must be initialized in alloc_super()
before any possible failure, but currently it is initialized close to
the end of the function leading to a useless warning dumped to log if
either percpu_counter_init() or list_lru_init() fails. Let's fix this.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wang Shilong